Home / Paint & Coatings / Suppliers / Allnex
Paint & Coatings
Allnex
Allnex lists 1,142 grades in Paint & Coatings. The sheets saved on this site are below.
Grades from Allnex
AEROTEX® NMA-LF Monomer
AEROTEX® NMA-LF is specifically designed to provide effective selfcrosslinking performance together with a significant reduction in both the formaldehyde present in the resulting emulsion polymer and the formaldehyde released to the environment upon curing. AEROTEX® NMALF combines the cost effectiveness of AEROTEX® NMA with a dramatic reduction in total formaldehyde. The active self-crosslinking species of AEROTEX® NMA-LF is N-methylolacrylamide (NMA). NMA contains both a vinyl group and an N-methylol group. The vinyl group is reactive and enables the NMA to be readily incorporated into a variety of polymer backbones. Once incorporated into the polymer, the methylol group can be triggered to undergo crosslinking with itself, other functional groups in the polymer (such as hydroxyls or amines), or with cellulosic substrates. The bifunctional feature of AEROTEX® NMA-LF ultimately results in latex binders which provide important performance properties to the final product, such as wet strength, tear strength, and solvent resistance.
ALNOVOL® PN 160
Alnovol® PN 160/PAST is a non-self-curing phenolic resin of the novolak type. This product is suitable for reinforcing natual rubber, styrene-butadiene rubber, EPDM rubber and nitrile rubber. Alnovol® PN 160/PAST is readily absorbed by the rubber mix and they have a strong plasticizing effect.
ALNOVOL® PN 320/PAST
ALNOVOL® PN 320/PAST is a non-self-curing phenolic resins of the novolak type. It's usable to petrol-resistant coatings, sealers and electro insulating varnishes.
ALNOVOL® PN 430/GGMA
ALNOVOL® PN 430/GGMA is a non self-curing novolac.
ALNOVOL® PN 650/60B
ALNOVOL® PN 650/60B is designed to act as a modifier of heat curable phenolic/polyester resin combinations (BADGE-free & BPA-NI systems) and phenolic/epoxy resin formulas. An addition of 20 - 40% of ALNOVOL® PN 650/60B as solid on total dry film solid improves the flexibility of the coating by maintaining the chemical resistance. Positive effects in regards to leveling and substrate adhesion could be observed as well. Application areas are the interior and exterior layer of metal packaging goods like collapsibletubes,cans and drums for water,oils and food.
ALNOVOL® PN 760
ALNOVOL® PN 760/PAST is a non self-crosslinking modified phenol novolac. The resin is used in rubber compounds as adhesion promoter for steel and textile cord. Alnovol® PN 760 is incorporated into the mix in the first stage of compounding. Due to the low content of free phenol processing does not generate any vapors and it is not accompanied by odorous annoyance.
ALNOVOL® UF 410 RPC
ALNOVOL® UF 410 RPC is a carbamic resin on silica. It is compatible with most of the synthetic and natural rubbers. Due to the silica carrier in solvents, no clear solution is possible.
AQUAGUARD™ CLEAR GELCOAT
AQUAGUARD Clear Gelcoat is a pre-promoted thixotropic spray grade gelcoat developed primarily for use in sanitaryware applications. Aquaguard Clear Gelcoat is a premium product that is highly durable and exhibits excellent weathering and chemical resistance properties.
AQUAGUARD® XA ATHOL BLUE
AQUAGUARD® XA POOL GELCOATS are high performance finishes for the production of FRP composite Swimming Pools.
AQUAGUARD® XA DOVE GREY
AQUAGUARD® XA DOVE GREY is a high performance finish for the production of FRP composite Swimming Pools. AQUAGUARD®XA POOL gelcoats are highly durable, and exhibit outstanding UV, weathering and chemical resistance properties, in this demanding outdoor application.\r\n
AQUAGUARD™ XA LAGOON BLUE
AQUAGUARD™ XA LAGOON BLUE is a high performance finish for the production of FRP composite Swimming Pools. AQUAGUARD®XA POOL gelcoats are highly durable, and exhibit outstanding UV, weathering and chemical resistance properties, in this demanding outdoor application.\r\n
AQUAGUARD® XA POOL BLUE
AQUAGUARD® XA POOL GELCOATS are high performance finishes for the production of FRP composite Swimming Pools. AQUAGUARD® XA POOL gelcoats are highly durable, and exhibit outstanding UV, weathering and chemical resistance properties, in this demanding outdoor application.
AQUAGUARD® XC BERMUDA BLUE
AQUAGUARD® XC GELCOATS are a range of high performance stone like finish decorative Gelcoats. These highly durable Gelcoats exhibit outstanding UV, weathering and chemical resistance properties.
AQUAGUARD® XC CORAL BLUE
AQUAGUARD® XC GELCOATS are a range of high performance stone like finish decorative Gelcoats. These highly durable Gelcoats exhibit outstanding UV, weathering and chemical resistance properties.
AQUAGUARD® XC IVORY SAND
AQUAGUARD® XC GELCOATS are a range of high performance stone like finish decorative Gelcoats. These highly durable Gelcoats exhibit outstanding UV, weathering and chemical resistance properties.
AQUAGUARD™ XC MID BLUE
AQUAGUARD® XC GELCOATS are a range of high performance stone like finish decorative Gelcoats. These highly durable Gelcoats exhibit outstanding UV, weathering and chemical resistance properties.
AQUAGUARD® XH OCEAN BLUE
AQUAGUARD® XH GELCOATS are high performance, hybrid, cosmetic finishes for the production of FRP composite materials intended for service in demanding indoor and outdoor applications.
AQUAGUARD® XH PLATINUM
AQUAGUARD® XH GELCOATS are high performance, hybrid, cosmetic finishes for the production of FRP composite materials intended for service in demanding indoor and outdoor applications.
AQUAGUARD® XH REEF BLUE
AQUAGUARD® XH GELCOATS are high performance, hybrid, cosmetic finishes for the production of FRP composite materials intended for service in demanding indoor and outdoor applications
AQUAGUARD™ XP WHITE GELCOAT
AQUAGUARD™ XP is a highly durable gelcoat that exhibits outstanding performance and handling properties.
AQUAGUARD® XS AZURE
AQUAGUARD® XS GELCOATS are high performance cosmetic finishes for the production of FRP composite materials intended for service in demanding indoor and outdoor applications.
AQUAGUARD® XS BAHAMAS
AQUAGUARD® XS GELCOATS are high performance cosmetic finishes for the production of FRP composite materials intended for service in demanding indoor and outdoor applications.
AQUAGUARD® XS BORA BORA
AQUAGUARD® XS GELCOATS are high performance cosmetic finishes for the production of FRP composite materials intended for service in demanding indoor and outdoor applications.
AQUAGUARD® XS CASPIAN
AQUAGUARD® XS GELCOATS are high performance cosmetic finishes for the production of FRP composite materials intended for service in demanding indoor and outdoor applications.
AQUAGUARD® XS MALDIVES
AQUAGUARD® XS GELCOATS are high performance cosmetic finishes for the production of FRP composite materials intended for service in demanding indoor and outdoor applications.
AQUAGUARD® XS NIGHT
AQUAGUARD® XS GELCOATS are high performance cosmetic finishes for the production of FRP composite materials intended for service in demanding indoor and outdoor applications.
AQUAGUARD® XS SEYCHELLES
AQUAGUARD® XS GELCOATS are high performance cosmetic finishes for the production of FRP composite materials intended for service in demanding indoor and outdoor applications.
AQUAGUARD® XS STRATUS
AQUAGUARD® XS GELCOATS are high performance cosmetic finishes for the production of FRP composite materials intended for service in demanding indoor and outdoor applications.
AQUAPOL™ 102S
AQUAPOL™ 102S is an aqueous dispersion of a styrene acrylic copolymer. It is recommended for 2 pack cementitious based waterproofing membranes for internal wet areas prior to tiling and general purpose gap fillers.
AQUAPOL™ 430E
AQUAPOL™ 430E is an APEO free, high solids styrene acrylic for 2 pack cementitious based water proofing membranes and coatings, both internal and exterior applications.
BECKOCOAT® PU 428/51XMPAC
Beckocoat® PU 428/51XMPAC is a light stabilized, oil-free, moisture curing one-component polyurethane resin. It's used in floor sealers, wood coating, concrete impregnation, and as crosslinkers for alkyd resins in two-component systems.
BECKOCOAT® VPU 4204/40LG
Beckocoat® VPU 4204/40LG is a flat, moisture curing one-component polyurethane resin. It's used for floor sealers, wood paints and concrete impregnation sealers.
BECKOCURE™ EH 2100w/44WA
BECKOCURE™ EH 2100w/44WA is an amine-hardener dispersion, particularly suitable for the formulation of waterborne 2K-epoxy coatings for concrete and metal, free of volatile amines and solvents. In combination with epoxy dispersions or suitable liquid epoxy resins, fast drying coatings with an excellent performance can be obtained. The product is easy to handle and to apply, even without the use of additional organic solvents.
BECKOCURE™ EH 2260w/41WA
BECKOCURE™ EH 2260W/41WA is a hydrophobic amine hardener recommended for the formulation of waterborne metal coatings, free of volatile basic amines and solvents. In combination with epoxy dispersions, fast drying primers and monocoats with excellent corrosion protection and very good non-sagging properties can be formulated. This product shows excellent application behavior and very robust performance even on poorly prepared surfaces.
BECKOPOX™ E 04643
BECKOPOX™ E 04643 is a highly reactive epoxide functional resin designed as a hardener for carboxyl functional polyester resins for use in the production of hybrid powder coatings. Coatings based on carboxylic polyesters such as CRYLCOAT® E 04613 and CRYLCOAT® E 04681 produce outstanding smoothness and chemical resistance at temperature as low as 125°C on MDF.
BECKOPOX™ E 04649
BECKOPOX™ E 04649 is an epoxide functional resin designed as hardener for carboxylated polyester resins for use in the production of hybrid powder coatings. Coatings based on carboxylic polyester such as CRYLCOAT® E 04632 for production of matte dry blend powder coatings with gloss level of 20 – 35% produce outstanding smoothness at cure temperature as low as 130°C on MDF.
BECKOPOX™ E 04743
BECKOPOX™ E 04743 is a highly reactive epoxide functional resin designed as a hardener for carboxyl functional polyester resins for use in the production of hybrid powder coatings. Coatings based on carboxylic polyesters such as CRYLCOAT® E 04735 and CRYLCOAT® E 04681 produce outstanding smoothness and chemical resistance at temperature as low as 125°C on MDF.
BECKOPOX™ EH 2189w/50WA
Beckopox® EH 2189W/50WA is a highly reactive amine hardener for waterbased 2K epoxy coatings on metallic substrates. It is used together with solid epoxy resin dispersions like e.g. Beckopox® EP 384W. Coating systems for metallic substrates can be formulated with excellent humidity and salt spray resistance. The use of 70 - 80 % of the stoichometric curing agent quantity has given best results.
BECKOPOX™ EH 613w/80WA
Beckopox® EH 613W/80WA is a waterborne acetic acid free aliphatic polyamine adduct. It's a highly reactive hardener for water reducible coatings on mineral metallic substrates where fast cure and water release are important.
BECKOPOX™ EH 623w/80WA
Beckopox® EH 623W/80WA is a waterborne solvent and acetic acid free polyamine epoxy curing agent. It's a hardener for water-reducible coatings on mineral and metallic substrates, hydryaulic epoxy mortars (ECC).
BECKOPOX™ EH 637
Beckopox® EH 637 is a cycloaliphatic polyamine adduct with very low viscosity, for use together with liquid epoxy resins for flooring compounds with good chemical resistance and low yellowing tendency.
BECKOPOX™ EH 694
BECKOPOX™ EH 694 is an anhydride hardener for use with solid epoxy resins, OH-functional polyesters or as an additional crosslinker for epoxy/polyester hybrid systems for the manufacture of powder coatings. Formulations based on BECKOPOX™ EH 694 exhibit chemical and over-bake resistance.
BECKOPOX™ EM 2120w/45WA
BECKOPOX® EM 2120W/45WA is an epoxy-amine-adduct dispersion in water, containing very small amounts of organic co-solvent. BECKOPOX® EM 2120W/45WA is suited to formulate water borne 1 pack anticorrosive primers and 1 pack single coats with good anticorrosive properties, especially on smooth steel.
BECKOPOX™ EM 460/60IBX
Beckopox® EM 460/60IBX is an excellent adhesion to steel and nonferrous metals, high corrosions protection, best recoatability. It is used preferably in combination with polyvinyl butyral (PVB) for the production of wash primers and finish coatings.
BECKOPOX™ EP 116
Beckopox® EP 116 is a non-crystallizing liquid resin for coatings with high chemical-resistance, adhesives, trowelling, casting and laminating compounds.
BECKOPOX™ EP 117
Beckopox® EP 117 is a non-crystallizing, reactive diluted liquid resin for chemical-resistant coatings, concrete injections, adhesives, trowelling casting and laminating compounds.
BECKOPOX™ EP 128
Beckopox® EP 128 is a solvent-free liquid epoxy resin. It is used in: the construction field for chemical and abrasion resistant flooring compounds, for sealing and repairing stone and concrete structures, anticorrosion/solvent-free coating systems, for cold and heat-curing trowelling and adhesive systems, in the electrical industry for castings, impregnations and composites, and for tool- and mould constructions, patterns, models and fixtures.
BECKOPOX™ EP 140
Beckopox® EP 140 is a liquid resin with high chemical resistance for coatings, adhesives, trowelling, casting and laminating compounds.
BECKOPOX™ EP 140/80SNB
Beckopox® EP 140/80SNB is a liquid A-type resin diluted with organic solvent. Depending on the type of hardener it can be used for room temperature or heat curing applications. This form of delivery is especially designed for high solids formulations of anticorrosion coatings and coatings with excellent chemical resistance.
BECKOPOX™ EP 147w
BECKOPOX™ EP 147w is a non-crystallizing Bisphenol A/F liquid epoxy resin containing cross-linkable emulsifiers. It is used in primers/coatings on mineral and metallic substrates, and adhesives and water-washable jointing-compounds for tiles.
BECKOPOX™ EP 2340w/56WA
BECKOPOX® EP 2340W/56WA is serving for trial purposes only. Deviations which might occur during transfer into manufacturing in a commercial scale are possible and do not constitute any material defect.
BECKOPOX™ EP 2350w/60WA
Beckopox® EP 2350W/60WA is a solid epoxy resin dispersion in water with improved chemical resistance.
BECKOPOX™ EP 2352w/54WA
Beckopox™ EP 2352w/54WA makes waterborne epoxy systems easier to use and more reliable. Its outstanding shear stability ensures smooth processing during high-shear mixing and consistent application even under demanding conditions such as airless spraying.
BECKOPOX™ EP 2384w/57WA
BECKOPOX™ EP 2384w/57WA is a type 1 solid epoxy resin as aqueous dispersion. It results in rapid drying coating systems for mineral and metal substrates.
BECKOPOX™ EP 2392w/70MP
Beckopox® EP 2392w/70MP is a flexibilized, water-emulsifiable, solid epoxy resin that is diluted in methoxypropanol. This solution can be easily emulsified with water in a high-speed mixer to achieve a stable dispersion. This product is used to formulate anticorrosive primers, singular topcoats, due to its water-free form of delivery this product is very well suited for processing of water-sensitive pigments like zinc dust, such zinc-rich primers exhibit outstanding anti-corrosive properties.
BECKOPOX™ EP 301/75X
Beckopox® EP 301/75X is a Type 1 resin for solventborne coatings, anticorrosion primers, additional binder for stoving paints, e.g. based on saturated polyesters or acrylates.
BECKOPOX™ EP 384w/53WAMP
BECKOPOX™ EP 384w/53WAMP is a solid resin -Type 1- dispersion, in combination with water emulsifiable liquid resins for fast drying coatings, preferably for mineral substrates.
BECKOPOX™ EP 385w/56WA
Beckopox® EP 385W/56WA is a solid epoxy resin; flexibilized; dispersion in water. Formulations have good adhesion to various plastics such as PC, PA, PUR and UP-laminates.
BECKOPOX™ EP 386w/52WA
Beckopox® EP 386W/52WA is an internally plasticized solid resin-Type 1-dispersion with improved shear stability, e.g. for water reducible fast drying anticorrosion primers and coatings for plastics.
BECKOPOX™ EP 387w/52WA
BECKOPOX™ EP 387w/52WA is a flexible solid epoxy resin. It is suited for corrosion protection primers with very good adhesion to most metallic substrates. It is also suitable for use in single coat and decorative systems for metallic substrates. For optimium corrosion protection it is recommended using 75 % of the stoichiometric curing agent quantity.
BECKOPOX™ VEH 2106w/80WA
Beckopox® VEH 2106W/80WA is an aliphatic polyamine adduct that is used together with solid epoxy resin dispersions or emulsified liquid resins.
BECKOPOX™ VEH 2177w/80WA
BECKOPOX™ VEH 2177w/80WA is a waterborne non-acetic acid containing aliphatic polyamine adduct used together with solid epoxy resin dispersions or emulsified liquid resins.
BECKOPOX™ VEH 2188w/55WA
Beckopox® VEH 2188W/55WA is a hydrophobic amine hardener especially for the formulation of waterborne metal coatings free of volatile basic amines.
BECKOPOX™ VEH 2849w/80WA
Beckopox® VEH 2849W/80WA is a waterborne acetic acid free aliphatic polyamine adduct that is a highly reactive hardener for water reducible coatings on mineral metallic substrates where fast cure and water release are important.
BECKOPOX™ VEM 2448/50EEP
Beckopox® VEM 2448/50EEP is a modified, carboxylated epoxy resin, self cross-linking. It's a sole binder for white and clear interior and exterior can-coating systems, stamping enamels, capsule lacquers, foil lacquers and coil-coating primers with outstanding resistances.
BECKOPOX™ VEP 2381w/55WA
Beckopox® VEP 2381W/55WA is a 1001 type epoxy dispersion for water based topcoats, primers, and DTM coatings.
BECKOPOX™ VEP 2382w/55WA
BECKOPOX® VEP 2382W/55WA is solid epoxy resin dispersion in water. When cured with suitable curing agents such as Beckopox EH 623w or EH 659w fast drying coating systems for mineral or metallic substrates can be formulated.
CRYLCOAT® 1501-6
CRYLCOAT® 1501-6 is a highly reactive carboxylated polyester resin for use in the production of 50/50 hybrid powder coatings. This resin is designed for use with low viscosity epoxy resins and is suitable for the production of coatings at cure temperatures as low as 130° C on MDF substrates. Coatings based on this product combine good flow with high gloss and chemical resistance.
CRYLCOAT® 1506-0
CRYLCOAT® 1506-0 is a highly reactive carboxylated polyester resin for use in the production of 50/50 hybrid powder coatings. Formulations based on CRYLCOAT® 1506-0 exhibit good overbake and solvent resistance, good mechanical properties and very good flow.
CRYLCOAT® 1506-6
CRYLCOAT® 1506-6 is an extreme reactive carboxylated polyester resin for use in the production of 50/50 hybrid powder coatings. The resin is to be used with a low viscosity epoxy resin and is particularly suitable for the production of textured coatings for cure at temperatures between 120° and 140°C on MDF substrates.
CRYLCOAT® 1510-0
CRYLCOAT® 1510-0 is a carboxylated polyester resin for use in the production of 50/50 hybrid powder coatings. Coatings based on CRYLCOAT® 1510-0 exhibit excellent flow, high gloss, and excellent wetting of fillers and pigments.
CRYLCOAT® 1514-2
CRYLCOAT® 1514-2 is a carboxylated polyester resin for use in the production of 50/50 hybrid powder coatings. Formulations based on CRYLCOAT® 1514-2 combine good flow with excellent overbake resistance.
CRYLCOAT® 1540-0
CRYLCOAT® 1540-0 is a highly reactive carboxylated polyester resin for use in the production of 50/50 hybrid powder coatings. Formulations based on CRYLCOAT® 1540-0 exhibit excellent flow, high gloss, and excellent wetting of fillers and pigments.
CRYLCOAT® 1544-0
CRYLCOAT® 1544-0 is a low reactive carboxyl functional polyester resin for use in the manufacture of 50/50 or 60/40 hybrid powder coatings. CRYLCOAT® 1544-0 is compatible with other carboxyl functional polyester resins and can be blended in all ratios to provide intermediate reactivity.
CRYLCOAT® 1545-6
CRYLCOAT® 1545-6 is a tin-free highly reactive carboxylated polyester resin for use in 50/50 hybrid powder coatings suitable for heat sensitive substrates. Coatings based on CRYLCOAT® 1545-6 exhibit good mechanical properties and physical ageing stability.
CRYLCOAT® 1570-0
CRYLCOAT® 1570-0 is a medium reactive carboxyl functional polyester resin for use in the production of 50/50 hybrid powder coatings with good flow out and high flexibility if cured at approx. 5-7 min at 180°C.
CRYLCOAT® 1573-0
CRYLCOAT® 1573-0 is a medium reactive carboxyl functional polyester resin for use with epoxy resins EEW 700-900 in a 50/50 ratio for the manufacture of hybrid powder coatings. Formulations based on CRYLCOAT® 1573-0 exhibit excellent flow with very good gloss.
CRYLCOAT® 1574-6
CRYLCOAT® 1574-6 is a highly reactive carboxylated polyester resin for use in the production of 50/50 hybrid powder coatings. The resin is particularly suitable for the production of coatings for cure at temperatures between 130° and 140° C on MDF substrates. Coatings based on CRYLCOAT® 1574-6 combine good flow with high gloss.
CRYLCOAT® 1577-0
CRYLCOAT® 1577-0 is a medium reactive carboxyl functional polyester resin for use with epoxy resins EEW 700-900 in a 50/50 ratio for the manufacture of hybrid powder coatings. Formulations based on CRYLCOAT® 1577-0 exhibit good flexibility and storage stability.
CRYLCOAT® 1581-6
CRYLCOAT® 1581-6 is an organo-tin free highly reactive carboxyl functional polyester resin for use in the production of 50/50 hybrid powder coatings. This resin is designed for use with low viscosity epoxy resins and is suitable for the production of coatings at cure temperatures as low as 130° C on MDF substrates.
CRYLCOAT® 1593-0
CRYLCOAT® 1593-0 is a highly reactive carboxylated polyester resin for use in the production of 50/50 hybrid powder coatings. Formulations based on CRYLCOAT® 1593-0combine good flow with good gloss.
CRYLCOAT® 1616-2
CRYLCOAT® 1616-2 is a low reactivity carboxyl functional polyester resin with high Tg for use with epoxy resins EEW 700-900 at a 60/40 ratio for the manufacture of hybrid powder coatings. Powder coatings formulations based on CRYLCOAT® 1616-2 exhibit excellent flow and very good gloss.
CRYLCOAT® 1620-0
CRYLCOAT® 1620-0 is a carboxylated polyester resin for use in hybrid powder coatings in a ratio range of 50/50 to 60/40. Coatings based on CRYLCOAT® 1620-0 can be blended with CRYLCOAT® 1622-0 in all ratios to provide intermediate reactivity.
CRYLCOAT® 1622-0
CRYLCOAT® 1622-0 is a carboxylated polyester resin for use in hybrid powder coatings in a ratio range of 50/50 to 60/40. Coatings based on CRYLCOAT®1622-0 can be blended with CRYLCOAT® 1620-0 in all ratios to provide intermediate reactivity.
CRYLCOAT® 1626-0
CRYLCOAT® 1626-0 is a carboxylated polyester resin for use in medium-cure 60/40 hybrid powder coatings. Formulations based on CRYLCOAT® 1626-0 exhibit excellent flow and can be used in economical formulations.
CRYLCOAT® 1627-0
CRYLCOAT® 1627-0 is a carboxylated polyester resin for use in 60/40 hybrid powder coatings. Coatings based on CRYLCOAT® 1627-0 combine very good flow and gloss with excellent storage stability.
CRYLCOAT® 1630-0
Crylcoat® 1630-0 is a low reactive carboxyl functional polyester resin for use with epoxy resins EEW 700-900 in ratios from 50/50 to 60/40 to manufacture hybrid powder coatings. Formulations containing Crylcoat® 1630-0 exhibit good storage stability.
CRYLCOAT® 1631-0
CRYLCOAT® 1631-0 is a medium reactive carboxyl functional polyester resin for use with epoxy resins in a ratio range from 50/50 to 60/40 to manufacture hybrid powder coatings. Formulations containing CRYLCOAT® 1631-0 exhibit good storage stability.
CRYLCOAT® 1648-2
CRYLCOAT® 1648-2 is a carboxylated polyester resin for use in medium-cure 60/40 hybrid powder coatings. Coatings based on this product, exhibit good flow with excellent mechanical properties, gloss and boiling water test resistance.
CRYLCOAT® 1650-2
CRYLCOAT® 1650-2 is a low reactive carboxyl functional polyester resin for use with epoxy resins in a 60/40 ratio to manufacture hybrid powder coatings. Formulations containing CRYLCOAT® 1650-2 combine high gloss and excellent flow.
CRYLCOAT® 1660-0
CRYLCOAT® 1660-0 is a carboxylated polyester resin for use in low-reactive 60/40 hybrid powder coatings. Coatings based on CRYLCOAT® 1660-0 exhibit good flexibility, high gloss, and outstanding flow using high amounts of filler.
CRYLCOAT® 1683-0
CRYLCOAT® 1683-0 is a high Tg carboxyl functional polyester resin for use with epoxy resins EEW 700-900 in a ratio 60/40 to manufacture hybrid powder coatings to be cured at 200°C. Formulations containing CRYLCOAT® 1683-0 exhibit excellent solvent resistance.
CRYLCOAT® 1690-0
CRYLCOAT® 1690-0 is a carboxylated polyester resin designed for 60/40 hybrid powder coatings to be cured at 180°C. Coatings based on CRYLCOAT® 1690-0 show an outstanding flow out with excellent mechanical and detergent resistance.
CRYLCOAT® 1692-0
CRYLCOAT® 1692-0 is a low reactive carboxyl functional polyester resin for blending with other resins to improve the flow of the system.
CRYLCOAT® 1701-0
CRYLCOAT® 1701-0 is a highly reactive carboxyl functional polyester resin for use with epoxy resin in a 70/30 ratio to manufacture hybrid powder coatings. Systems based on CRYLCOAT® 1701-0 exhibit excellent mechanical properties, very good flow and overbake resistance. CRYLCOAT® 1701-0 belongs to the ECOWISE™ CHOICE product range for selected applications. (Contact your allnex representative for more information).
CRYLCOAT® 1702-0
CRYLCOAT® 1702-0 is a low reactive carboxyl functional polyester resin for use with epoxy resin in a 70/30 ratio to manufacture hybrid powder coatings. Systems based on CRYLCOAT® 1702-0 exhibit excellent mechanical properties, very good flow and overbake resistance.
CRYLCOAT® 1703-1
CRYLCOAT® 1703-1 is a TMA-free tribo chargeable carboxylated polyester resin designed for 70/30 hybrid powder coatings. Coatings based on CRYLCOAT® 1703-1 exhibit excellent flow and good gloss.
CRYLCOAT® 1704-0
CRYLCOAT® 1704-0 is a reactive carboxyl functional polyester resin for use with epoxy resin in a 70/30 ratio to manufacture hybrid powder coatings. Systems based on CRYLCOAT® 1704-0 exhibit excellent mechanical properties, good flow and overbake resistance.
CRYLCOAT® 1713-1
CRYLCOAT® 1713-1 is a TMA-free tribo chargeable carboxylated polyester resin designed for 70/30 hybrid powder coatings. Coatings based on this product exhibit excellent flow and good gloss.
CRYLCOAT® 1716-0
CRYLCOAT® 1716-0 is a medium reactive carboxylated polyester resin designed for 70/30 hybrid powder coatings. Formulations based on CRYLCOAT® 1716-0 exhibit very good flow with very high gloss. Matte coatings can be obtained when this product is formulated with former Vestagon® B 68 type matting hardener (Evonik).
CRYLCOAT® 1732-0
CRYLCOAT® 1732-0 is a carboxyl functional polyester resin for use with epoxy resins in a 70/30 ratio to manufacture low bake hybrid powder coatings suitable for curing at a temperature level of 160 °C. Formulations based on CRYLCOAT® 1732-0 provide good flow and gloss combined with improved flexibility and ageing resistance.
CRYLCOAT® 1738-2
CRYLCOAT® 1738-2 is a medium reactive, overbake stabilized, carboxyl functional polyester resin for use in the production of 70/30 Hybrid Powder Coatings. This resin allows the affordable powder formulations in full gloss range and suitable for both smooth and texture or structure finishes. In addition, CRYLCOAT® 1738-2 offers excellent mechanical, and storage stability. Gloss below 30% with outstanding flow can be achieved with matting hardener.
CRYLCOAT® 1749-0
CRYLCOAT® 1749-0 is a medium to low reactive carboxyl functional polyester resin for use with epoxy resin in a 70/30 ratio to manufacture hybrid powder coatings. Formulations based on CRYLCOAT® 1749-0 exhibit a balanced overall performance combined with excellent storage stability of correspondent powder coatings.
CRYLCOAT® 1770-0
CRYLCOAT® 1770-0 is a carboxyl functional polyester resin for use with epoxy resins in a 70/30 ratio to manufacture hybrid powder coatings. CRYLCOAT® 1770-0 can be blended in any ratio with CRYLCOAT® 1783-0 to provide intermediate reactivity.
CRYLCOAT® 1781-0
CRYLCOAT® 1781-0 is a carboxyl functional polyester resin for use with epoxy resins in a 70/30 ratio to manufacture hybrid powder coatings. Formulations based on CRYLCOAT® 1781-0 provide good flow and very good gloss with a very high glass transition temperature.
CRYLCOAT® 1783-0
CRYLCOAT®1783-0 is a low reactive, carboxylated polyester resin for use with epoxy resins in the production of 70/30 hybrid powder coatings. Formulations based on CRYLCOAT® 1783-0 exhibit very good gloss and flow and can be blended in any ratio with CRYLCOAT® 1770-0 to control reactivity.
CRYLCOAT® 1791-2
CRYLCOAT® 1791-2 is a medium reactive carboxyl functional polyester resin for use with epoxy resins EEW 700-900 in a ratio 70/30 to manufacture hybrid powder coatings. Formulations containing CRYLCOAT® 1791-2 exhibit good flow, mechanical properties and very good gas oven resistance.
CRYLCOAT® 1853-2
CRYLCOAT® 1853-2 is a carboxyl functional polyester resin for use with epoxy resins EEW 700-900 in an 80/20 ratio to manufacture hybrid powder coatings.
CRYLCOAT® 2401-2
CRYLCOAT® 2401-2 is a carboxylated polyester resin for use with TGIC in the production of powder coatings. Coatings based on CRYLCOAT® 2401-2 exhibit outstanding flow, excellent outdoor durability and high flexibility.
CRYLCOAT® 2403-6
CRYLCOAT® 2403-6 is a low viscosity carboxyl- functional polyester resin for use with 8% TGIC or 6% HAA in the production of low bake powder coatings. Coatings based on CRYLCOAT® 2403-6 and TGIC cured at 15 min x 120°C combine excellent flexibility, adhesion, gloss and film hardness.
CRYLCOAT® 2406-2
CRYLCOAT® 2406-2 is a low reactive carboxyl functional polyester resin for use with 6% TGIC or 4% HAA in the production of powder coatings. Formulations based on CRYLCOAT® 2406-2 exhibit excellent flow; high gloss and flexibility. The resin shows excellent matting efficiency.
CRYLCOAT® 2409-0
CRYLCOAT® 2409-0 is a TMA-free, highly reactive carboxylated polyester resin for use with TGIC or HAA in the production of powder coatings. Coatings based on CRYLCOAT® 2409-0 exhibit outstanding flow with excellent outdoor durability and are stabilized for use in direct-fired gas ovens.
CRYLCOAT® 2411-2
CRYLCOAT® 2411-2 is a carboxylated polyester resin for use in 93/7 TGIC or 95/5 HAA powder coatings. Coatings based on CRYLCOAT® 2411-2 exhibit outstanding flow, very good flexibility, improved ageing stability and excellent outdoor durability.
CRYLCOAT® 2413-2
CRYLCOAT® 2413-2 is a carboxylated polyester resin for use with 10% TGIC or 7% HAA ratio to manufacture powder coatings preferably smooth G 20 matte dry blend systems in combination with CRYLCOAT® 2470-2. Formulations based on CRYLCOAT® 2413-2 exhibit good flow, high solvent resistance, excellent outdoor weathering resistance and outstanding storage stability.
CRYLCOAT® 2414-0
CRYLCOAT® 2414-0 is a carboxylated polyester resin for use with 10% TGIC or 7% HAA in the production of powder coatings. Coatings based on CRYLCOAT® 2414-0 can be dry-blended with CRYLCOAT® 2432-0 based powders to give matte coatings that exhibit good smoothness and good outdoor durability.
CRYLCOAT® 2415-2
CRYLCOAT® 2415-2 is a carboxylated polyester resin for use with 10% TGIC or 7% HAA to manufacture powder coatings preferably smooth G 20 matte dry blend systems in com- bination with CRYLCOAT® 2452-2. Formulations based on CRYLCOAT® 2415-2 exhibit good flow, high solvent resistance, excellent outdoor weathering resistance and outstanding storage stability.
CRYLCOAT® 2416-2
CRYLCOAT® 2416-2 is a carboxyl functional polyester resin designed for curing with 6% TGIC or 4% HAA for architectural applications. Coatings based on CRYLCOAT® 2416-2 exhibit good outdoor durability, gloss, flow out and excellent storage stability of powder coatings formulations.
CRYLCOAT® 2418-2
CRYLCOAT® 2418-2 is a carboxyl functional polyester resin designed for curing with TGIC in the ratio of 93/7 for architectural applications. Coatings based on CRYLCOAT® 2418-2 exhibits good outdoor durability, gloss, flow out and excellent storage stability of powder coatings formulations.
CRYLCOAT® 2421-5
CRYLCOAT® 2421-5 is a medium reactive, TMA-free carboxylated polyester resin for use with 7% TGIC or 5% HAA. Formulations based on CRYLCOAT® 2421-5 exhibit outstanding flow and are heat stabilized. The product can be considered for PCM applications.
CRYLCOAT® 2425-0
CRYLCOAT® 2425-0 is a carboxylated polyester resin for use with 7% TGIC or 5% HAA in the production of powder coatings. Formulations based on CRYLCOAT® 2425-0 exhibit good flow, outdoor durability, and mechanical properties.
CRYLCOAT® 2427-2
CRYLCOAT® 2427-2 is a carboxyl functional polyester resin for use in combination with TGIC in 95/5 ratio or with HAA hardener in 96/4 ratio. Formulations based on CRYLCOAT® 2427-2 have excellent suitability for general industrial applications.
CRYLCOAT® 2427-3
CRYLCOAT® 2427-3 is a tribo-active carboxyl functional polyester resin for use in combination with TGIC in 95/5 ratio or with HAA hardener in 96/4 ratio. Formulations based on CRYLCOAT® 2427-3 have excellent suitability for general industrial applications.
CRYLCOAT® 2431-0
CRYLCOAT® 2431-0 is a carboxyl functional polyester resin for use with 10% TGIC or 7% HAA to manufacture powder coatings preferably smooth G30 matte dry blend systems in combination with CRYLCOAT® 2452-2. Formulations based on CRYLCOAT® 2431-0 exhibit good flow, high solvent resistance, excellent outdoor weathering resistance and outstanding storage stability.
CRYLCOAT® 2432-0
CRYLCOAT® 2432-0 is a carboxylated polyester resin for use with 4% TGIC or 3% HAA for the production of powder coatings. Coatings based on CRYLCOAT® 2432-0 can be dry-blended with CRYLCOAT® 2414-0 based powders to give matte coatings that exhibit good smoothness and good outdoor durability.
CRYLCOAT® 2435-6
CRYLCOAT® 2435-6 is a high reactive carboxylated polyester resin for use with 7% TGIC or 5% HAA. Coatings based on CRYLCOAT® 2435-6 are fully cured at 160°C for 15 mins and provide excellent blooming resistance.
CRYLCOAT® 2437-0
CRYLCOAT® 2437-0 is a TMA-free carboxylated polyester resin for use with TGIC or HAA in the manufacture of powder coatings. Formulations based on CRYLCOAT® 2437-0 are non-blooming and exhibit outstanding flow, excellent outdoor durability and are stabilized for direct fired gas ovens.
CRYLCOAT® 2437-2
CRYLCOAT® 2437-2 is a TMA-free carboxyl functional polyester resin for use with TGIC or HAA in the manufacture of powder coatings. Formulations based on CRYLCOAT® 2437-2 are non-blooming and exhibit outstanding flow, excellent outdoor durability and are stabilized for direct fired gas ovens.
CRYLCOAT® 2440-2
CRYLCOAT® 2440-2 is a carboxylated polyester resin for use with 7% TGIC or 5% HAA in the production of powder coatings. Coatings based on CRYLCOAT® 2440-2 exhibit excellent flow, excellent outdoor durability and good flexibility.
CRYLCOAT® 2441-2
CRYLCOAT® 2441-2 is a carboxyl functional polyester resin for use with 7% TGIC or 5% HAA in the production of powder coatings. Formulations based on CRYLCOAT® 2441-2 exhibit outstanding flow, excellent outdoor durability, very good flexibility, physical aging and storage stability.
CRYLCOAT® 2441-7
CRYLCOAT® 2441-7 is an organo-tin free carboxyl functional polyester resin for use with 7% TGIC or 5% HAA in the production of powder coatings. Formulations based on CRYLCOAT® 2441-7 exhibit outstanding flow, excellent outdoor durability, very good flexibility, physical aging and storage stability.
CRYLCOAT® 2442-0
CRYLCOAT® 2442-0 is a carboxyl functional polyester resin for use in 93/7 TGIC powder coatings. Coatings based on CRYLCOAT® 2442-0 exhibit outstanding flow, excellent flexibility, improved ageing stability and good outdoor durability.
CRYLCOAT® 2443-3
CRYLCOAT® 2443-3 is a tribo enhanced carboxyl functional polyester resin for the formulation of powder coatings with 7% TGIC.
CRYLCOAT® 2450-2
CRYLCOAT® 2450-2 is a carboxylated polyester resin for use with 7% TGIC or 5% HAA in the production of powder coatings. Coatings based on CRYLCOAT® 2450-2 exhibit very good flow, excellent outdoor durability, and good physical aging.
CRYLCOAT® 2451-6
CRYLCOAT® 2451-6 is a low viscosity carboxyl- functional polyester resin for use with 7% TGIC or 5% HAA in the production of low bake powder coatings. Coatings based on CRYLCOAT® 2451-6 and TGIC cured at 10 min x 150°C combine excellent flexibility, adhesion, gloss and film hardness. At 92/8 ratio full cure can be achieved at 15 min at 130°C.
CRYLCOAT® 2452-2
CRYLCOAT® 2452-2 is a low reactive carboxyl functional polyester resin for use with 4% TGIC or 3% HAA. Formulations based on CRYLCOAT® 2452-2 exhibit good flow, high solvent resistance, excellent outdoor weathering resistance and outstanding storage stability. A 50/50 dry blend based on CRYLCOAT® 2452-2 and CRYLCOAT® 2431-0 produces a very nice matte finish (approx. 30% gloss).
CRYLCOAT® 2462-2
CRYLCOAT® 2462-2 is a carboxyl functional polyester resin for use with 7% TGIC in the production of powder coatings. Formulations based on CRYLCOAT® 2462-2 exhibit good flow, excellent outdoor durability, flexibility and improved boiling water resistance.
CRYLCOAT® 2468-5
CRYLCOAT® 2468-5 is a low reactive, carboxyl functional polyester resin for use with 7% TGIC or 5% HAA in the production of industrial powder coatings. CRYLCOAT® 2468-5 has good suitability to formulate matte coatings. Formulations based on CRYLCOAT® 2468-5 exhibit good outdoor durability, flow and mechanical properties.
CRYLCOAT® 2470-2
CRYLCOAT® 2470-2 is a carboxyl functional polyester resin for use with 4% TGIC or 3% HAA hardener in the production of matte dry blend powder coatings. Formulations based on CRYLCOAT® 2470-2 exhibit good flow, mechanicals and improved outdoor durability.
CRYLCOAT® 2471-4
CRYLCOAT® 2471-4 is a carboxylated polyester resin for clear exterior durable powder coatings when used with 93/7 TGIC or 95/5 HAA. CRYLCOAT® 2471-4 exhibits optimized flow and transparency.
CRYLCOAT® 2473-4
CRYLCOAT® 2473-4 is a carboxylated polyester resin for clear exterior durable powder coatings when used with 93/7 TGIC or 95/5 HAA. CRYLCOAT® 2473-4 exhibits optimized flow, and transparency at a low temperature.
CRYLCOAT® 2475-2
CRYLCOAT® 2475-2 is a standard reactive carboxylated polyester resin for use with TGIC in 93/7 ratio. Coatings based on CRYLCOAT® 2475-2 are fully cured at 200°C for 10 min and provide excellent blooming and gas-oven resistance.
CRYLCOAT® 2476-2
CRYLCOAT® 2476-2 is a medium reactive carboxyl functional polyester resin designed for curing with 6% TGIC or 4% HAA for architectural applications. Coatings based on CRYLCOAT® 2476-2 exhibit good outdoor durability, gloss, flow out and excellent storage stability of powder coatings formulations.
CRYLCOAT® 2477-2
CRYLCOAT® 2477-2 is a standard reactive carboxylated polyester resin for use with 7% TGIC or 5% HAA. Coatings based on CRYLCOAT® 2477-2 are fully cured at 200°C for 10 min and provide outstanding flow combined together with excellent blooming and gas-oven resistance.
CRYLCOAT® 2478-1
CRYLCOAT® 2478-1 is a reactive carboxyl functional polyester resin for use with 7% TGIC or 5% HAA in the production of architectural powder coatings. Formulations based on CRYLCOAT® 2478-1 exhibit excellent outdoor durability, high flexibility and storage stability.
CRYLCOAT® 2482-2
CRYLCOAT® 2482-2 is a carboxyl functional polyester resin for use with 7% TGIC or 5% HAA to manufacture powder coatings that are curing at 10 min x 200°C (object temperature). Powder coatings based on CRYLCOAT® 2482-2 provide very good flexibility, mechanical aging and good outdoor resistance.
CRYLCOAT® 2486-2
CRYLCOAT® 2486-2 is a carboxylated polyester resin for use with 6% TGIC in production of powder coatings. Coatings based on CRYLCOAT® 2486-2 exhibit good flow, good flexibility in high gloss application, and the resin shows excellent matting efficiency.
CRYLCOAT® 2488-5
CRYLCOAT® 2488-5 is a carboxyl functional polyester resin for use with TGIC in a 93/7 ratio to manufacture powder coatings. Formulations based on CRYLCOAT® 2488-5 exhibit good flow, and mechanical properties. Correspondent coatings show high retention of gloss and flexibility with low tendency of yellowing even after 60 min exposure to temperatures as high as 270°C.
CRYLCOAT® 2490-2
CRYLCOAT® 2490-2 is a carboxylated polyester resin for use with 10% TGIC or 7% HAA. Formulations based on CRYLCOAT® 2490-2 exhibit good flow with an outstanding outdoor weathering resistance. A 50/50 dry blend based on CRYLCOAT® 2490-2 and CRYLCOAT® 2691-2 produces a 40% gloss at 60°.
CRYLCOAT® 2491-2
CRYLCOAT® 2491-2 is a carboxyl functional polyester resin preferably for use with Primid® XL 552 (96.5/3.5) or TGIC (96/4). Formulations based on CRYLCOAT® 2491-2 exhibit good flow and excellent mechanical properties. Powders based on CRYLCOAT® 2491-2 can also be used as the slow component in matte dry-blend HAA systems.
CRYLCOAT® 2492-2
CRYLCOAT® 2492-2 is a carboxyl functional polyester resin for use with 7% TGIC or 5% HAA to manufacture powder coatings that are curing at 10 min x 200°C (object temperature). Powder coatings based on CRYLCOAT® 2492-2 provide very good flexibility, mechanical aging and good outdoor resistance.
CRYLCOAT® 2496-2
CRYLCOAT® 2496-2 is a low reactive carboxyl functional polyester resin for use with TGIC or Primid® XL-552. Formulations based on CRYLCOAT® 2496-2 have a low hardener demand and exhibit very good outdoor durability.
CRYLCOAT® 2498-0
CRYLCOAT® 2498-0 is a medium reactivity carboxyl functional polyester resin for use with 7% TGIC or 5% HAA. Formulations based on CRYLCOAT® 2498-0 exhibit good outdoor durability, good flow and mechanical properties.
CRYLCOAT® 2499-6
CRYLCOAT® 2499-6 is a carboxyl functional polyester resin for use in low bake (10 min x 160°C) TGIC or HAA powder coatings. Coatings based on CRYLCOAT® 2499-6 exhibit good flow, excellent gloss, mechanical properties with improved storage stability and blooming resistance.
CRYLCOAT® 2501-2
CRYLCOAT® 2501-2 is a carboxylated polyester resin cured with 9% Araldite® PT 910 at 200°C. Coatings based on this resin exhibit outstanding flow-out and good mechanical properties. CRYLCOAT® 2501-2 belongs to the ECOWISE™ CHOICE product range for selected applications. (Contact your allnex representative for more information).
CRYLCOAT® 2505-4
CRYLCOAT®2505-4 is a polyester resin for clear exterior durable powder coatings with outstanding flow and transparency. This resin is designed for formulation with 8-9% Araldite® PT-910. Formulations do not require additional flow promoters.
CRYLCOAT® 2506-1
CRYLCOAT® 2506-1 is a carboxylated polyester resin cured with Araldite® PT 910 (91/9) at 180°C. Coatings based on CRYLCOAT® 2506-1 exhibit excellent flow and outdoor durability. The resin is tribo active and can be used in gas-fired ovens.
CRYLCOAT® 2554-6
CRYLCOAT® 2554-6 is a carboxyl functional polyester resin for low bake applications when combined with PT910 or PT912 at 92:8 ratio. This resin is designed to be cured 20 minutes at 130° C.
CRYLCOAT® 2606-3
CRYLCOAT® 2606-3 is a high performance tribo active carboxyl functional polyester resin for use with HAA hardener in 95/5 mixing ratio in outdoor powder coatings. Coatings made with CRYLCOAT® 2606-3 exhibit a nice reactivity combined with good flow, outdoor durability, overbake-, gas-oven- and water-spot resistance.
CRYLCOAT® 2608-6
CRYLCOAT® 2608-6 is a high reactive carboxyl functional polyester resin for use with Primid® XL 552 in 95/5 mixing ratio in industrial outdoor powder coatings. Coatings made with CRYLCOAT® 2608-6 exhibit excellent cure response and broad cure window, good flow, improved storage stability and blooming resistance.
CRYLCOAT® 2609-6
CRYLCOAT® 2609-6 is a high reactive, tribo active carboxyl functional polyester resin for use with 5% HAA hardener in low bake (12 min x 160°C object temperature) formulations for architectural applications. Coatings based on CRYLCOAT® 2609-6 are blooming resistant and exhibit improved outdoor durability and water-spot resistance.
CRYLCOAT® 2611-0
CRYLCOAT® 2611-0 is a Primid® polyester resin designed for matte one-shot systems to produce in combination with CRYLCOAT® 2687-2 powder coatings with 60° gloss between 5 and 10%. The coatings show very good mechanical properties, flow, and outdoor resistance.
CRYLCOAT® 2617-3
CRYLCOAT® 2617-3 is a TMA-free, tribo-active carboxylated polyester resin for use with HAA hardener to produce powder coatings. Formulations based on CRYLCOAT® 2617-3 exhibit improved degassing, excellent flow and excellent mechanical properties. CRYLCOAT® 2617-3 belongs to the ECOWISE™ CHOICE product range for selected applications. (Contact your allnex representative for more information).
CRYLCOAT® 2618-3
CRYLCOAT® 2618-3 is a high performance, tribo-active carboxylated polyester resin for use with Primid® XL-552 to produce powder coatings. Formulations based on CRYLCOAT® 2618-3 exhibit good flow and mechanical properties, very good overbake resistance, and good gas resistance. These formulations provide a level of outdoor weathering resistance that meets GSB and Qualicoat standards.
CRYLCOAT® 2619-3
CRYLCOAT® 2619-3 is a low demand carboxylated resin for use with HAA hardener in the production of powder coatings. Formulations based on CRYLCOAT® 2619-3 exhibit good flow, good mechanical properties, very good overbake and gas oven resistance.
CRYLCOAT® 2621-2
CRYLCOAT® 2621-2 is a carboxylated polyester resin for use with Primid® XL-552 in the production of matte dry-blend powder coatings. Formulations based on CRYLCOAT® 2621-2 and CRYLCOAT® 2622-2 or CRYLCOAT® 2691-2 can achieve 60° glosses between 20 -25%. These coatings show very good mechanical properties and flow.
CRYLCOAT® 2630-2
CRYLCOAT® 2630-2 is a TMA-free, carboxylated polyester resin for use with Primid XL-552 in the production of powder coatings. Formulations based on CRYLCOAT® 2630-2 exhibit improved color stability in direct fire gas ovens, excellent flow and mechanical properties, no pinholing in thicker films, and are blooming free.
CRYLCOAT® 2635-2
CRYLCOAT® 2635-2 is a carboxylated polyester resin for use with CRYLCOAT® 2638-2 in the production of one-shot matte Primid® powder coatings that produce coatings with a 60° gloss range of 20% to 40%. The coatings exhibit very good mechanical properties, flow, and outdoor resistance.
CRYLCOAT® 2640-3
CRYLCOAT® 2640-3 is a low demand carboxylated polyester resin for use with 3.5% HAA hardener in the production of powder coatings. Coatings based on CRYLCOAT® 2640-3 combine good mechanical properties with excellent outdoor durability.
CRYLCOAT® 2642-0
CRYLCOAT® 2642-0 is a carboxyl functional polyester resin for use with HAA hardener in a 90/10 ratio. Powder coatings based on CRYLCOAT® 2642-0 can be dry-blended with a lower reactivity powder coating to produce matte coatings.
CRYLCOAT® 2645-3
CRYLCOAT® 2645-3 is a low demand carboxyl- functional polyester resin for use with 3.5% HAA in the production of powder coatings. Coatings formulations based on CRYLCOAT® 2645-3 combine good mechanical properties with excellent outdoor durability, blooming- and water-spot resistance.
CRYLCOAT® 2650-3
CRYLCOAT® 2650-3 is a carboxyl polyester resin for use with HAA hardener in the production of dry-blend matte powder coatings. Coatings based on CRYLCOAT® 2650-3 and CRYLCOAT® 2670-3 can achieve gloss levels of 20 to 25%. These coatings exhibit very good mechanical properties, good flow, and improved outdoor durability that will meet or even exceed Qualicoat or GSB specifications.
CRYLCOAT® 2651-3
CRYLCOAT® 2651-3 is a high performance tribo active carboxyl functional polyester resin for HAA hardener based outdoor powder coatings. Powder films based on this product exhibit excellent flow and degassing properties, excellent outdoor durability; good mechanical properties, over-bake and gas oven resistance.
CRYLCOAT® 2653-3
CRYLCOAT® 2653-3 is a carboxyl functional polyester resin for use with Primid® XL-552 or TGIC in architectural applications. Coatings based on CRYLCOAT® 2653-3 exhibit improved corrosion resistance.
CRYLCOAT® 2654-2
CRYLCOAT® 2654-2 is a high performance carboxyl functional polyester resin for Primid® based outdoor powder coatings. Coatings based on CRYLCOAT® 2654-2 exhibit good flow and degassing properties, improved storage stability and excellent outdoor durability combined with improved overbake, gas-oven and water-spot resistance.
CRYLCOAT® 2655-6
CRYLCOAT® 2655-6 is a carboxylated polyester resin for use in powder coating formulations that require lower cure schedules when used with 7% HAA hardener.
CRYLCOAT® 2662-3
CRYLCOAT® 2662-3 is a high reactive carboxyl functional polyester resin for use with 5% Primid® XL 552 in low bake (10 min x 160°C) or fast cure (2 min x 180°C) formulations for the industrial coatings segment. Coatings based on CRYLCOAT® 2662-3 exhibit good flow and good outdoor durability.
CRYLCOAT® 2668-6
CRYLCOAT® 2668-6 is a low bake tribo active carboxyl functional Primid® polyester resin in ratio of 97/3 for matte dry- blend systems. In combination with CRYLCOAT® 2693-6, powder coatings with 60° gloss between 25 and 30 gloss units can be formulated; full cure can be achieved at 12 min x 160°C schedule.
CRYLCOAT® 2670-3
CRYLCOAT® 2670-3 is a Primid® resin that is used with CRYLCOAT® 2671-3 for production of matte dry blend powder coatings at a gloss level of 32-36%. When used with CRYLCOAT® 2650-2, gloss levels of 20-23% can be achieved. These coatings exhibit very good mechanical properties, flow, and outdoor durability that meet or exceed GSB and Qualicoat specifications.
CRYLCOAT® 2671-3
CRYLCOAT® 2671-3 is a Primid® resin that is used with CRYLCOAT® 2670-3 in the production of matte dry blend powder coatings at a gloss level of 32-36%. These coatings exhibit mechanical properties, flow and outdoor durability that meet or exceed GSB and Qualicoat specifications.
CRYLCOAT® 2679-6
CRYLCOAT® 2679-6 is a high reactive carboxyl functional polyester resin for use with 5% HAA hardener in low bake (10 min x 160°C) formulations for architectural applications. Coatings based on CRYLCOAT® 2679-6 exhibit good outdoor durability and improved water-spot resistance.
CRYLCOAT® 2687-2
CRYLCOAT® 2687-2 is a Primid® resin designed for matte one-shot systems to produce in combination with CRYLCOAT® 2611-0 powder coatings with 60° gloss between 5-10%. Coatings exhibit very good mechanical properties, flow and outdoor durability.
CRYLCOAT® 2691-2
CRYLCOAT® 2691-2 is a low reactive carboxylated polyester resin for use with Primid® XL 552 (97/3). Formulations based on CRYLCOAT® 2691-2 exhibit good flow and excellent mechanical properties. Powders based on CRYLCOAT® 2691-2 can also be used as the slow component in matte dry blend Primid® systems.
CRYLCOAT® 2695-0
CRYLCOAT® 2695-0 is a low reactive carboxyl functional polyester resin for use with Primid® XL-552 or TGIC in the production of powder coatings. Formulations based on CRYLCOAT® 2695-0 exhibit very good outdoor durability while requiring low hardener demand.
CRYLCOAT® 2696-6
CRYLCOAT® 2696-6 is a high reactive, tribo enhanced carboxyl functional polyester resin for use with 5% Primid® XL 552 in low bake (10 min x 160°C) or fast cure (2 min x 180°C) formulations for the industrial coatings seg-ment. Coatings based on CRYLCOAT® 2696-6 exhibit excellent blooming-resistance at low temperatures and good overall properties.
CRYLCOAT® 2697-6
CRYLCOAT® 2697-6 is a high reactive carboxyl functional polyester resin for use with 4% Primid® XL 552. Coatings based on CRYLCOAT® 2697-6 exhibit good flow and mechanical properties.
CRYLCOAT® 2698-3
CRYLCOAT® 2698-3 is a tribo active resin for HAA hardener based powder coatings exhibiting outstanding flow-out and degassing properties. Formulations cured at 10 min x 180 °C exhibit excellent mechanical properties and physical ageing.
CRYLCOAT® 2810-0
CRYLCOAT® 2810-0 is a low demand, high Tg value, hydroxyl functional polyester resin for use with blocked polyisocyanates, uretdiones to produce polyurethane powder coatings.
CRYLCOAT® 2814-0
CRYLCOAT® 2814-0 is a hydroxyl functional polyester resin with very high hydroxyl content for use with polyisocyanate hardeners. Coatings based on CRYLCOAT® 2814-0 can be used to produce both glossy and matte polyurethane finishes that exhibit excellent hardness, stain resistance and are suitable for anti-graffiti powder coatings.
CRYLCOAT® 2818-0
CRYLCOAT® 2818-0 is a hydroxyl functional polyester resin with for use with blocked aliphatic and aromatic isocyanates in the production of powder coatings. CRYLCOAT® 2818-0 is also suitable for use with polyanhydride hardeners like BECKOPOX® EH 694 to obtain high Tg, thermal resistant coatings.
CRYLCOAT® 2845-0
CRYLCOAT® 2845-0 is a hydroxyl functional polyester resin with for use with blocked polyisocyanates or uretdiones in the production of powder coatings. Systems based on CRYLCOAT® 2845-0 require less blocked polyisocyanate without affecting the good overall properties.
CRYLCOAT® 2860-0
CRYLCOAT® 2860-0 is a hydroxyl functional polyester resin for use with blocked polyisocyanates or uretidiones to manufacture one-shot matte powder coatings when used with CRYLCOAT® 2814-0 or CRYLCOAT® E04076.
CRYLCOAT® 2890-0
CRYLCOAT® 2890-0 is a hydroxylated polyester resin for use with blocked isocyanates in the production of powder coatings. Coatings based on CRYLCOAT® 2890-0 exhibit outstanding flow and good outdoor durability.
CRYLCOAT® 2920-0
CRYLCOAT® 2920-0 is a hydroxylated polyester resin for use with POWDERLINK® 1174. Coatings based on CRYLCOAT® 2920-0, ADDITOL® P 920, and POWDERLINK® 1174 produce wrinkle finishes that exhibit excellent mechanical properties and good weathering resistance.
CRYLCOAT® 4404-0
CRYLCOAT® 4404-0 is a superdurable resin designed for curing with TGIC in the ratio of 92/8. Clear coatings based on this system exhibit excellent outdoor durability, gloss and improved corrosion resistance and are suitable for a curing schedule of 20 min x 160°C.
CRYLCOAT® 4420-0
CRYLCOAT® 4420-0 is a carboxylated super-durable polyester resin for use with TGIC in a 90/10 ratio or Primid® XL 552 in 92/8 ratio. Formulations based on CRYLCOAT® 4420-0 exhibit good flow and outstanding outdoor resistance. Dry blends with CRYLCOAT® 4430-0 (TGIC) or with CRYLCOAT® 4641-0 (Primid®) provide semi-gloss coatings.
CRYLCOAT® 4420-2
CRYLCOAT® 4420-2 is a carboxyl functional superdurable polyester resin for use with TGIC in a 90/10 ratio or HAA in 92/8 ratio. Formulations based on CRYLCOAT®4420-2 exhibit good flow, heat- and gas oven resistance and outstanding outdoor durability. Dry blends with CRYLCOAT® 4430-0 (TGIC) or with CRYLCOAT® 4641-0 (HAA) provide semi-gloss coatings.
CRYLCOAT® 4430-0
CRYLCOAT® 4430-0 is a carboxylated superdurable polyester resin for use with 7% TGIC or 5% HAA. Formulations based on CRYLCOAT® 4430-0 exhibit good flow and an exceptionally high level of outdoor resistance. Dry blend systems utilizing CRYLCOAT® 4420-0 provide semi-gloss coatings.
CRYLCOAT® 4442-2
CRYLCOAT® 4442-2 is a superdurable, low bake carboxyl functional polyester resin for use with 7% TGIC or 5% HAA in outdoor powder coatings with full cure at 10 min x 160°C (object temperature). Coatings based on CRYLCOAT® 4442-2 provide high gloss, flow out, DOI and smoothness.
CRYLCOAT® 4452-0
CRYLCOAT® 4452-0 is a superdurable, low bake carboxyl functional polyester resin for use with 7% TGIC or 5% HAA in outdoor powder coatings with full cure at 10 min x 160°C (object temperature). Coatings based on CRYLCOAT® 4452-0 provide high gloss, flow out, DOI and smoothness.
CRYLCOAT® 4488-0
CRYLCOAT® 4488-0 is a carboxylated, superdurable polyester resin for use with 7% TGIC or 5% HAA. Systems based on CRYLCOAT® 4488-0 are suitable for use in direct-fired gas ovens and can withstand 10 years Florida outdoor exposure depending on formulation.
CRYLCOAT® 4540-0
CRYLCOAT® 4540-0 is a carboxylated polyester resin for the formulation of powder coatings with 7% of Araldite® PT-910. Coatings based on CRYLCOAT® 4540-0 exhibit excellent outdoor durability.
CRYLCOAT® 4627-2
CRYLCOAT® 4627-2 is a superdurable carboxyl functional polyester resin for use with Primid® XL-552 in a ratio of 95/5. Coatings based on CRYLCOAT® 4627-2 exhibit excellent outdoor resistance combined with improved corrosion resistance.
CRYLCOAT® 4641-0
CRYLCOAT® 4641-0 is a superdurable, carboxylated polyester resin for the formulation of powder coatings with Primid® XL-552 in a 97/3 ratio. Coatings based on CRYLCOAT® 4641-0 provide outstanding weather resistance. When dry blended with CRYLCOAT® 4420-0 or CRYLCOAT® E 37179, a 60º gloss of 30 or 20 (respectively) can be obtained.
CRYLCOAT® 4642-3
CRYLCOAT® 4642-3 is a superdurable carboxyl functional polyester resin for use with Primid® XL 552 or QM 1260 in ratios 95/5 or 94.5/5.5 respectively. When properly formulated coatings based on CRYLCOAT® 4642-3 can surpass 5 years Florida exposure.
CRYLCOAT® 4643-3
CRYLCOAT® 4643-3 is a superdurable carboxyl functional polyester resin for use with HAA hardener in ratios 93/7 designed for applications with excellent outdoor resistance.
CRYLCOAT® 4645-2
CRYLCOAT® 4645-2 is a superdurable carboxylated polyester resin for use with CRYLCOAT® 4629-0 in the production of one-shot matte HAA powder coatings with 60° gloss between 20 to 40%. The coatings exhibit outstanding outdoor resistance with good flow and mechanical properties.
CRYLCOAT® 4651-0
CRYLCOAT® 4651-0 is a superdurable resin designed for matte one-shot HAA systems to produce, in combination with CRYLCOAT® 4693-2, powder coatings with 60° gloss between 5 and 12%. The coatings show good mechanical properties, flow and outdoor durability.
CRYLCOAT® 4659-0
CRYLCOAT® 4659-0 is a superdurable carboxyl functional polyester resin for use with Primid® or TGIC to manufacture superdurable powder coatings. Coatings based on CRYLCOAT® 4659-0 exhibit outstanding flow and are blooming free.
CRYLCOAT® 4679-0
CRYLCOAT® 4679-0 is a carboxyl functional superdurable polyester resin. When cured with 10% HAA hardener, coatings based on CRYLCOAT® 4679-0 exhibit excellent outdoor resistance. When dry blended with a powder coating based on CRYLCOAT® 4641-0, a gloss at 60° angle of around 20% can be obtained.
CRYLCOAT® 4688-2
CRYLCOAT® 4688-2 is a carboxylated polyester resin for the formulation of flexible superdurable powder coatings with Primid® XL-552. Coatings based on CRYLCOAT® 4688-2 can be used for agricultural and construction equipment.
CRYLCOAT® 4693-2
CRYLCOAT® 4693-2 is a superdurable resin for use with HAA hardener in the production of one-shot matte coatings. When used in combination with CRYLCOAT® 4651-0, powder coatings can achieve a 60° gloss between 5 and 12% while exhibiting good mechanical properties, flow and outdoor durability.
CRYLCOAT® 4698-2
CRYLCOAT® 4698-2 is a carboxyl functional flexible superdurable polyester resin for the formulation with Primid® XL 552. Coatings based on CRYLCOAT® 4698-2 show improve-ments in mechanical strength with excellent chemical and over bake resistance. It is suitable for automotive-, agricultural- and construction equipment (ACE) applications.
CRYLCOAT® 4874-0
CRYLCOAT® 4874-0 is a hydroxyl functional superdurable polyester resin for use with blocked polyisocyanates or uretdiones. Coatings based on CRYLCOAT® 4874-0 exhibit outstanding outdoor resistance. CRYLCOAT® 4874-0 is a product under development.
CRYLCOAT® 4890-0
CRYLCOAT® 4890-0 is a hydroxylated, superdurable polyester resin for use with blocked isocyanates or uretdiones in the production of powder coatings. Coatings based on CRYLCOAT® 4890-0 exhibit superior outdoor durability. CRYLCOAT® 4890-0 belongs to the ECOWISE™ CHOICE product range for selected applications. (Contact your allnex representative for more information).
CRYLCOAT® 8079-0
CRYLCOAT® 8079-0 is a semi-crystalline polyester resin designed to work with CRYLCOAT® superdurable resins to produce coatings with improved flexibility. The ratio between the superdurable resin and CRYLCOAT® 8079-0 may be adjusted to produce the target flexibility.
CRYLCOAT® 9240-0
CRYLCOAT® 9240-0 is a hydroxyl functional polyester resin suitable for use as cleaning material for extruders.
CRYLCOAT® 9246-0
CRYLCOAT® 9246-0 is an organic filler for epoxy powder coatings, suitable for indoor decorative coatings or as cleaning material for extruders.
CRYLCOAT® 9292-0
CRYLCOAT® 9292-0 is an organic filler for epoxy powder coatings. Up to 20% of the epoxy resin can be substituted by CRYLCOAT® 9292-0 without affecting coating properties. Additionally, the relatively low hydroxyl value of CRYLCOAT® 9292-0 allows the production of aromatic polyurethane powder coatings requiring a reduced amount of isocyanate hardeners.
CRYLCOAT® E 04327
CRYLCOAT® E 04327 is a superdurable carboxylated polyester resin for use with Primid® XL-552. Coatings based on CRYLCOAT® E 04327 exhibit excellent outdoor resistance combined with improved corrosion resistance. CRYLCOAT® E 04327 is currently under development.
CRYLCOAT® E 04362
CRYLCOAT® E 04362 is a superdurable hydroxyl functional polyester resin for use with blocked isocyanates or uretdiones. Coatings based on this product exhibit outstanding outdoor resistance.
CRYLCOAT® E 04375
CRYLCOAT® E 04375 is a hydroxyl functional, superdurable polyester resin for use with blocked isocyanates or uretdiones, preferably in combination with higher functional counterparts for the production of matte one shot powder coatings.
CRYLCOAT® E 04417
CRYLCOAT® E 04417 is a low reactive carboxyl functional polyester resin for use with 7% TGIC or 5% HAA. Coatings made with CRYLCOAT® E 04417 exhibit good flow and improved corrosion resistance.
CRYLCOAT® E 04430
CRYLCOAT® E 04430 is a tin- and TMA-free carboxyl functional polyester resin for use with 5% Primid® XL 552. Formulations based on CRYLCOAT® E 04430 exhibit improved color stability in direct fire gas ovens, excellent flow and mechanical properties, no pinholing in thicker films and are blooming free.
CRYLCOAT® E 04482
CRYLCOAT® E 04482 is a superdurable carboxyl functional polyester resin for use with 7% TGIC. Coatings based on CRYLCOAT® E 04482 exhibit excellent outdoor resistance combined with good balance of flow, surface appearance and full flexibility.
CRYLCOAT® E 04484
CRYLCOAT® E 04484 is a superdurable resin designed for curing with TGIC in the ratio of 93/7. Coatings based on this system exhibit excellent outdoor durability, gloss and improved corrosion resistance. CRYLCOAT® E 04484 is a product under development.
CRYLCOAT® E 04814
CRYLCOAT®E 04814 is a carboxylated polyester resin for use with HAA hardeners in the production of low gloss powder coatings with a 60° gloss range of approx. 10% to 20%. The resin is superdurable by design, correspondent matte coatings should be checked for outdoor durability. Coatings based on CRYLCOAT® E 04814 exhibit very good mechanical properties, flow and smoothness.
CRYLCOAT® E 04818
CRYLCOAT® E 04818 is a carboxyl functional polyester resin designed for curing with 7% TGIC or 5% HAA for architectural applications. Coatings based on CRYLCOAT® E 04818 exhibit good outdoor durability, gloss, flow out and excellent storage stability of powder coatings formulations.
CRYLCOAT® E 04824
CRYLCOAT® E 04824 is a carboxyl functional polyester resin for use with HAA hardeners in the production of low gloss powder coatings with a 60° gloss range of approx. 3% to 7%. The resin is superdurable by design, correspondent matte coatings should be checked for outdoor durability. Coatings based on CRYLCOAT® E 04824 exhibit very good mechanical properties, flow and smoothness.
CRYLCOAT® E 04876
CRYLCOAT® E 04876 is a carboxylated polyester resin for use with 6% TGIC in production of powder coatings. Coatings based on CRYLCOAT® E 04876 exhibit good flow, good flexibility in high gloss application, and the resin shows excellent matting efficiency.
CRYLCOAT® E 04884
CRYLCOAT® E 04884 is a carboxylated polyester resin for use with HAA hardeners in the production of low gloss single extrusion powder coatings with a 60° gloss range of approx. 20 to 30%. The resin is superdurable by design, correspondent matte coatings should be checked for outdoor durability. Coatings based on CRYLCOAT® E 04884 exhibit very good mechanical properties, flow, smoothness.
CRYLCOAT® E 04892
CRYLCOAT® E 04892 is a malonate polyester resin that acts as a donor resin in the Ultra Low Bake Novel coatings system.
CRYLCOAT® E 05077
CRYLCOAT® E 05077 is a standard reactive carboxylated polyester resin for use with 7% TGIC or 5% HAA. Coatings based on CRYLCOAT® E 05077 are fully cured at 200°C for 10 min and provide outstanding flow combined together with excellent blooming and gas-oven resistance.
CRYLCOAT® E 05079
CRYLCOAT® E 05079 is a carboxyl functional polyester resin for use in low bake (10 min x 160°C) TGIC or HAA powder coatings. Coatings based on CRYLCOAT® E 05079 exhibit excellent gloss, mechanical properties with improved storage stability, blooming resistance and edge-covering.
CRYLCOAT® OCEAN 2489-0
CRYLCOAT® OCEAN 2489-0 is a low demand, carboxyl functional polyester resin for use with 5% TGIC or 3.5% HAA hardener in the production of industrial powder coatings. CRYLCOAT® OCEAN 2489-0 contains post-consumer rPET as one of the major raw materials comprising 25% of the resin composition by weight. Formulations based on CRYLCOAT® OCEAN 2489-0 exhibit high degree of smoothness, gloss and flow out combined with high flexibility.
CRYLCOAT® OCEAN E 04811
CRYLCOAT® OCEAN E 04811 is a medium reactive carboxyl functional polyester resin for use in the production of 70/30 hybrid powder coatings. CRYLCOAT® OCEAN E 04811 contains post-consumer rPET as one of the major raw materials comprising 25% of the resin composition by weight. Formulations based on CRYLCOAT® OCEAN E 04811 exhibit excellent storage stability and general properties.
CRYLCOAT®E 04757
CRYLCOAT® E 04757 is a high reactive superdurable carboxyl functional polyester resin for use with HAA. Coatings based on CRYLCOAT® E 04757 are fully cured at 15 min x 160°C and exhibit excellent outdoor resistance combined with improved corrosion resistance.\r\n
CYCAT® 296-9
CYCAT® 296-9 Catalyst is an unique, phosphoric acid derivative "mild" catalyst developed to accelerate the cure of Cymel amino resins at normal baking temperatures, and to permit the cure of clear finishes and enamels within relatively low temperature ranges. Coatings containing CYCAT® 296-9 catalyst, may be cured on low temperature bake schedules to the same hardness as similar uncatalyzed systems which require higher temperatures. Since the corrosion resistance of finishes containing high levels of catalyst may be lessened, the resistance properties should be carefully checked.
CYCAT® 4040
CYCAT® 4040 Catalyst is a very versatile catalyst material especially formulated for consistency of strength for use in various solvent soluble and water-based thermosetting vehicles. It is especially recommended where a strong acid catalyst is desired to accelerate the cure of highly alkylated melamine-formaldehyde crosslinked systems and to reduce the curing temperature of urea resin systems.
CYCAT® 4045
CYCAT® 4045 Catalyst is an amine blocked para-toluene sulfonic acid catalyst. It is recommended for accelerating the cure response of amino crosslinking resins while providing improved formulation package stability compared with the un-blocked para-toluene sulfonic acid CYCAT® 4040 catalyst. It is especially recommended for use with highly alkylated amino crosslinking resins. This product provides excellent stability in high solids and waterborne systems, and in the latter it can be added without causing binder precipitation, which can often occur due to a drop in pH.
CYCAT® 600
CYCAT® 600A catalyst is an organic acid catalyst recommended to accelerate the crosslinking reaction of amino resins with polymers containing hydroxyl, carboxyl, or amide functionality. CYCAT® 600A is soluble in aliphatic and aromatic hydrocarbons, esters, ketones, alcohols, glycol ethers and water. It may be used as a replacement for less soluble acid catalysts, such as para-toluene sulfonic acid, in low alcohol-containing formulations. For formulation of 1K systems, CYCAT® 600A should be blocked with an appropriate amine, such as AMP (2-amino-2-methyl-1-propanol).
CYCAT® 600A
CYCAT® 600A catalyst is an organic acid catalyst recommended to accelerate the crosslinking reaction of amino resins with polymers containing hydroxyl, carboxyl, or amide functionality. CYCAT® 600A is soluble in aliphatic and aromatic hydrocarbons, esters, ketones, alcohols, glycol ethers and water. It may be used as a replacement for less soluble acid catalysts, such as para-toluene sulfonic acid, in low alcohol-containing formulations. For formulation of 1K systems, CYCAT® 600A should be blocked with an appropriate amine, such as AMP (2-amino-2-methyl-1-propanol).
CYCAT® 600T
CYCAT® 600T catalyst is an organic acid catalyst recommended to accelerate the crosslinking reaction of amino resins with polymers containing hydroxyl, carboxyl, or amide functionality. CYCAT® 600T is soluble in aliphatic and aromatic hydrocarbons, esters, ketones, alcohols, glycol ethers and water. It may be used as a replacement for less soluble acid catalysts, such as para-toluene sulfonic acid, in low alcohol-containing formulations. For formulation of 1K systems, CYCAT® 600T should be blocked with an appropriate amine, such as AMP (2-amino-2-methyl-1-propanol).
CYCAT® 6030
CYCAT® 6030 catalyst is an amine-neutralized dodecylbenzene sulfonic acid supplied in isopropanol. It is recommended for use as a catalyst to accelerate the cure of amino crosslinking agents and provide improved package stability. As a general rule, systems which employ a blocked catalyst will have a decreased rate of cure compared to those containing an unblocked catalyst; however, package stability with an unblocked catalyst will be poor.
CYCAT® 6925
CYCAT® 6925 catalyst is an amine-blocked dodecylbenzene sulfonic acid catalyst supplied in isopropanol and 2-butoxyethanol. It is used to initiate and accelerate the cure of aminoplasts, such as those based on melamine, urea, and benzoguanamine which are used to crosslink 1K thermoset systems. This product can be used in food contact applications. For the latest information about the compliance status with FDA, EU, Chinese or other food regulations.
CYCAT® VXK 6364
CYCAT® VXK 6364 is a catalyst which is suitable to accelerate the cure of fully alkylated melamine formaldehyde resins (hexamethoxymethylmelamine) like CYMEL 303 LF. Post curing of films containing CYCAT® VXK 6364 can occur. CYCAT® VXK 6364 is usable in solvent and waterborne thermosetting vehicles.
CYCAT® VXK 6395
CYCAT® VXK 6395 is an amino blocked acidic catalyst. It was developed for cross-linking reaction of urea and melamine curing systems at low temperatures. Typical application areas are stoving paint systems for general industry and for OEM automotive systems.
CYCAT® XK 406 N
Cycat® XK 406 N is a light to dark reddish coloured, low viscous liquid, phosphoric acid derivate. It increases the crosslinking speed of heat curing coating systems based on phenolic/-epoxide resin combinations. A significant improvement of adhesion properties is often seen in connection with the use of this product; furthermore, the use of Cycat® XK 406 N often leads to an improved sulphur staining resistance of interior can coating systems.
CYMEL® 1123
CYMEL® 1123 resin is a highly methylated/ethylated benzoguanamine resin developed primarily for use as a crosslinking agent in electrocoating and conventional coatings requiring high detergent and chemical resistance. Its excellent balance between adhesion and film flexibility, especially after several cure cycles, makes it particularly well suited for can coating applications. While it is insoluble in water, this product shows excellent compatibility with water soluble backbone polymers and provides very good stability in pH-buffered alkaline waterborne formulations.
CYMEL® 1130
CYMEL® 1130 resin is a highly methylated n-butylated melamine crosslinker with a high degree of alkylation, low methylol content and a low imino functionality. The hydrophobic nature combined with the high solids properties makes it very suitable for general industrial high solids baking formulations requiring improved wetting of metal substrates, film adhesion and humidity resistance properties. This product is insoluble in water but shows excellent compatibility with water soluble backbone polymers and provides very good stability in pH-buffered alkaline waterborne formulations.
CYMEL® 1133
CYMEL® 1133 Resin is a highly methylated, n-butylated melamine crosslinker with a high degree of alkylation. It has a higher butoxymethyl content and higher monomer content compared to CYMEL® 1130 resin. Its hydrophobic nature combined with very good film appearance properties makes CYMEL® 1133 resin suitable for automotive topcoat applications and general metal finishes requiring improved durability and resistance properties.
CYMEL® 1141
CYMEL® 1141 resin is a highly methylated/iso-butylated, carboxy-modified melamine crosslinker supplied in iso-butanol. It is especially designed for electro-deposition primer formulations requiring excellent corrosion and resistance properties. This product contains chelating groups which can form colored compounds with heavy metal ions such as iron and zinc. For that reason it is recommended to use CYMEL® 1141 resin only in dark single coat applications or primers and not in pastel colors.
CYMEL® 1156
CYMEL® 1156 resin is a highly butylated melamine resin developed for use in both water-borne and organo-soluble systems. It is very hydrophobic in nature, which makes it an excellent choice for internal can coating applications where good water extraction resistance is desired. Its excellent throwing power and migration efficiency makes this product suitable for anodic electrodeposition coatings.
CYMEL® 1158
CYMEL® 1158 is a butylated melamine-formaldehyde cross-linking agent with a medium to high degree of alkylation, a low to medium methylol content and a medium to high amino functionality. It is especially designed for medium solids systems, providing fast cure response, low blistering tendency and low formaldehyde release during cure.
CYMEL® 1161
CYMEL® 1161 resin is a highly monomeric, methylated/ iso-butylated melamine crosslinker with a high degree of alkylation. Its high monomer content allows for the formulation of high solids coatings with excellent appearance, recoat adhesion, and flexibility. It is especially recommended for automotive topcoats, general metal finishes, and coil coatings.
CYMEL® 1168
CYMEL® 1168 is a methylated, isobutylated melamine-formaldehyde cross-linking agent with a high degree of alkylation, a low methylol content and low imino functionality. It is suitable for a wide range of industrial stoving finishes, providing a good combination of mechanical and chemical resistance properties.
CYMEL® 1172
CYMEL® 1172 resin is an unalkylated glycoluril crosslinker supplied in water at 45% solids. It is designed to be used for crosslinking aqueous neutral or acidic hydroxyl or amide functional polymers and combines excellent stability at acidic pH with excellent reactivity. It cannot be used in amine neutralized or basic coating systems because of the potential problems of demethylolation of the compound and a significant decrease in cure response.
CYMEL® 202
CYMEL® 202 resin is a methylated/n-butylated, high imino melamine crosslinker supplied in n-butanol. Its hydrophobic nature combined with high reactivity, high solids content, and rather low formaldehyde release during the curing process, makes this product suitable for a wide range of medium to high solids or waterborne baking applications like can and container coating formulations, automotive coatings, and low cure systems to improve film appearance and resistance properties. It has a high tendency to self-condense at rather low baking temperatures, providing films with very good hardness, gloss, chemical resistance and outdoor durability.
CYMEL® 203
CYMEL® 203 resin is a methylated/n-butylated, high imino melamine crosslinker supplied in n-butanol. It has a slightly higher butoxymethyl content and higher molecular weight compared to CYMEL® 202 which provides for better flow and leveling while maintaining fast cure and hydrophobicity. This product is highly reactive and has a high tendency towards self-condensation reactions at rather low baking temperatures providing films with very good hardness, gloss, chemical resistance, and outdoor durability.
CYMEL® 211
CYMEL® 211 Resin is a high imino, mix- alkylated melamine formaldehyde resin designed specifically for high solids system. Its most significant advantage over the other high imino melamine resins in our product line is its superior water and corrosion resistance properties.
CYMEL® 232
CYMEL® 232 Resin is a highly alkylated methoxy butoxy melamine-formaldehyde resin. Its high degree of alkylation and high monomer content makes it especially recommended for low VOC systems, those applications requiring high film flexibility, and those systems where recoat adhesion must be optimized.
CYMEL® 235
CYMEL® 235 Resin is a highly alkylated methoxymethyl butoxymethyl melamine-formaldehyde resin. For electrodeposition coatings, both glossy finish and matt finish film can be achieved. CYMEL® 235 Resin is especially recommended for general metal finishes providing flexibility.
CYMEL® 243-3 Resin
CYMEL® 243-3 Resin is a partially n-butylated melamine-formaldehyde crosslinking agent supplied in high flash aromatic solvent. It has excellent compatibility and is recommended for thermosetting acrylic and alkyd topcoat finishes and metal decorating systems. Its high resistivity provides wide latitude in formulating electrostatic spray finishes.
CYMEL® 247-10
CYMEL 247-10 resin is a partially n-butylated melamine-formaldehyde crosslinking agent characterized by a superior degree of compatibility with most backbone polymers, as implied by its very high hydrocarbon tolerance value. CYMEL 247-10 resin is suitable for industrial baking enamels requiring good flow, high gloss and superior resistance properties. CYMEL 247-10 resin is also useful as a leveling agent in coil coating and metal decoration formulations to improve flow, wetting and gloss.
CYMEL® 250
CYMEL® 250 Resin is a new type of mixalkylated methylated and n-butylated melamine formaldehyde resin with high imino functions. It is designed specifically for automotive coating system and does not require a strong acid catalyst for fast cure response. CYMEL® 250 resin is similar reactivity to conventional n-butylated melamine resin. A formulation by using CYMEL® 250 resin can achieve lower VOC, compared to a formulation by using conventional n-butylated melamine formaldehyde resin.
CYMEL® 251
CYMEL® 251 Resin is a novel melamine-formaldehyde crossliknking agent of the mixed ether class. It possesses a lower level of alkylation then other mixed ethers, thus improving its adaptability to waterbone coating formulations. Waterbone systems based on CYMEL® 251 resin exhibit rapid cure response with improved water resistance compared with coatings based on conventional methylated melamine resins. In addition, coatings containing CYMEL® 251 resin maintain the excellent appearance properties charasteristic of mixed ether crosslinkers.
CYMEL® 254
CYMEL® 254 resin is a methylated and n-butylated melamine formaldehyde resin with high imino functions. It is designed specifically for high solids system and does not require a strong acid catalyst for fast cure response. Its most significant advantage over the other high imino melamine resin in our product line is its superior stain, water and corrosion resistance properties.
CYMEL® 285-100
CYMEL® 285-100 Resin is a highly alkylated methoxy butoxy melamineformaldehyde resin. Its high degree of alkylation and high monomer content, it is especially recommended for low VOC systems, those applications requiring high film flexibility, and those systems where recoat adhesion must be optimized.
CYMEL® 300
CYMEL 300 resin is a highly methylated melamine crosslinking agent and is the purest form of hexamethoxymethylmelamine available in our product line. Its high degree of alkylation coupled with its high monomer content makes CYMEL 300 resin an excellent crosslinker for applications where film flexibility is a premium, such as required in some coil and can coatings.
CYMEL® 3020
CYMEL® 3020 resin is a highly alkylated, mixed ether (methyl/n-butyl) melamine crosslinker. Its hydrophobic nature combined with very good film appearance properties makes CYMEL® 3020 resin suitable for automotive topcoat applications. CYMEL® 3020 is insoluble in water but has excellent compatibility with water soluble backbone polymers and provides very good stability in pH-buffered alkaline waterborne formulations.
CYMEL® 303 LF
CYMEL® 303 LF resin is a highly methylated, monomeric melamine crosslinker supplied in liquid form. Its high extent of alkylation and low tendency to self-condense makes this product a highly effective crosslinking agent for a broad range of applications such as can, container, automotive and general industrial coatings. While CYMEL® 303 LF resin is insoluble in water, it shows excellent compatibility with water-soluble backbone polymers and provides very good stability in amine-stabilized waterborne formulations.
CYMEL® 304
CYMEL® 304 resin is a specially alkylated, high solids melamine crosslinking agent designed specifically for industrial wood coating applications. Systems formulated with this product exhibits excellent catalyzed stability and films develop excellent early hardness, resistance properties, appearance and cold check resistance. It has very low free formaldehyde and low evolved formaldehyde on cure relative to conventional urea-based formulas.
CYMEL® 308
CYMEL® 308 resin is a highly methylated melamine crosslinker supplied as a liquid at >98% solids. Relative to CYMEL 303 LF resin, CYMEL® 308 resin is higher in molecular weight providing better substrate wetting, lower fuming tendency in high bake conditions, and fast network development. CYMEL® 308 resin is a highly effective crosslinking agent for a broad range of applications such as coil, can, container, automotive and general industrial coatings.
CYMEL® 3100
CYMEL® 3100 is a monomeric HMMM (Hexa-methoxy-methyl-melamine) resin, supplied as a viscose liquid - waxy solid with a solid content greater than 98%. It is designed to have low metal content for electronic applications. Designed for electronic materials applications, CYMEL® 3100 exhibits excellent reactivity toward hydroxyl-functional binders and serves as an effective crosslinker in negative-tone photoresists for i-line and g-line processes. Its high monomer purity contributes to improved formulation stability and consistent lithographic performance.
CYMEL® 323
CYMEL 323 resin is a methylated high imino melamine crosslinker supplied in iso-butanol. The exceptional high reactivity combined with very good hardness, appearance, and low formaldehyde release during cure makes CYMEL 323 resin suitable for low bake solvent-borne and water-borne formulations.
CYMEL® 325
CYMEL® 325 resin is a methylated high imino melamine crosslinker supplied in iso-butanol. It is highly reactive and has a high tendency towards self-condensation providing films with very good hardness, gloss, chemical resistance and outdoor durability. It is suitable for a wide range of solventborne or waterborne baking applications, such as coil and can coating formulations, automotive primers and topcoats, and general industrial coatings.
CYMEL® 325 N
CYMEL 325 N resin is a methylated high imino melamine crosslinker supplied in iso-butanol. CYMEL 325 N resin is highly reactive and has a high tendency towards self-condensation providing films with very good hardness, gloss, chemical resistance and outdoor durability. CYMEL 325 N resin is suitable for a wide range of solventborne or waterborne baking applications, such as coil and can coating formulations, automotive primers and topcoats, and general industrial coatings.
CYMEL® 328
CYMEL® 328 resin is a methylated high imino melamine crosslinker supplied in water. Its high reactivity and low formaldehyde release during cure makes this product suitable for a wide range of fast-curing waterborne industrial coating formulations, such as can and coil coatings, OEM and foil coating applications.
CYMEL® 370
CYMEL® 370 resin is a partially methylated melamine crosslinker supplied in iso-butanol. Like other high imino resins, CYMEL® 370 is fast reacting and has a high tendency to self-condense resulting in films with high film hardness, gloss, chemical resistance and exterior durability. The high reactivity, combined with high solids content makes CYMEL® 370 resin suitable for a wide range of solventborne and waterborne industrial bake formulations.
CYMEL® 370N
CYMEL® 370N Resin is a methylated melamine-formaldehyde crosslinking agent with a medium degree of alkylation, a high methylol content and low imino functionality. CYMEL® 370N resin is partially water soluble and has an excellent compatibility with water soluble backbone polymers. The carboxyl functionality of anionic backbone polymers is sufficiently acidic to catalyse the reaction at relatively low temperature curing schedules. This makes CYMEL® 370 resin suitable for a wide range of water borne industrial stoving finishes.
CYMEL® 373
CYMEL® 373 resin is a partially methylated melamine supplied in water. Its high reactivity combined with water solubility makes this product suitable for a wide range of fast-curing waterborne industrial coating formulations.
CYMEL® 3745
CYMEL® 3745 resin is a highly methylated melamine crosslinker designed for use in both solvent-borne and waterborne industrial finishes. Its high functionality and low tendency to self-condense promotes excellent formulated stability and results in films with very good hardness development, flexibility, formability, and resistance properties making it suitable for a wide range of coating applications, like can and container coatings, foil coatings, automotive coatings and waterborne formulations.
CYMEL® 380
CYMEL® 380 resin is a partially methylated melamine crosslinker supplied in iso-butanol. Like other high imino resins, CYMEL® 380 is fast reacting and has a high tendency to self-condense resulting in films with high film hardness, gloss, chemical resistance and exterior durability. The high reactivity, combined with high solids content makes CYMEL® 380 resin suitable for a wide range of solventborne and waterborne industrial bake formulations.
CYMEL® 385
CYMEL® 385 resin is a methylated high imino melamine resin with a low degree of alkylation. Being supplied in water, it is recommended as a crosslinking agent for hydroxyl-containing emulsion polymers and other aqueous systems containing hydroxyl or amide functionality. It has a high tendency to self-condense and may be used to increase the hardness and resistance properties of thermoplastic waterborne polymers.
CYMEL® 5010
CYMEL® 5010 resin is a partially n-butylated benzoguanamine resin supplied in a mixture of n-butanol and xylene and designed for solvent-based coatings. Like other benzoguanamine resins, this product imparts excellent adhesion and chemical resistance to the coating, but without the need for an external catalyst in the formulation.
CYMEL® 5015
CYMEL® 5015 resin is a highly butylated benzoguanamine resin developed primarily for use as a crosslinking agent in conventional coatings requiring chemical resistance. Its excellent balance between adhesion and film flexibility makes CYMEL® 5015 resin well suited for can coating applications.
CYMEL® 651E
CYMEL 651E resin is a partially n-butylated melamine crosslinker supplied at 60% solids in a mixture of n-butanol and xylene.
CYMEL® MB 98
CYMEL® MB-98 resin is a butylated melamine crosslinker with high degree of alkylation and very low free formaldehyde. It has been specially designed to improve the resistance properties of urea-based acid curing wood coating formulations.
CYMEL® MB-94 Resin
CYMEL® MB-94 resin is an n-butylated melamine crosslinker with a high degree of alkylation and very low free formaldehyde. CYMEL® MB-94 resin is designed for use in combination with urea resins for acid curing wood finishes to improve chemical resistance and cold check properties while maintaining fast drying properties.
CYMEL® MI-12-I
CYMEL MI-12-I resin is a partially iso-butylated melamine supplied in isobutanol. Its high reactivity, combined with very good leveling properties, makes CYMEL MI-12-I resin suitable for fast drying industrial applications like mirror backing, primers, and dipping enamels.
CYMEL® NF 3030
CYMEL® NF 3030 resin is a formaldehyde-free crosslinking agent supplied in water. It was designed primarily for use in 2 component, ambient or forced cure, water-borne conversion varnishes for industrial wood when formulated with an amine-free acrylic emulsion. Resulting formulas exhibit superior catalyzed pot life relative to isocyanate-based conversion varnishes. The resulting coatings have excellent appearance, early hardness, resistance properties, and hot/cold cycle flexibility.
CYMEL® NF 3041
CYMEL® NF-3041 resin is a formaldehyde-free, partially n-butylated crosslinking agent supplied in n-butanol. It was designed primarily for use in 2 pack ambient cure solvent-borne conversion varnishes for industrial wood. Systems containing this product exhibit superior catalyzed pot life relative to typical urea-based conversion varnishes and require significantly less catalyst to effect cure. The resulting coatings have excellent appearance, early hardness, resistance properties, and hot/cold cycle flexibility.
CYMEL® U-1050-10 Resin
CYMEL® U-1050-10 resin is a partially n-butylated urea resin supplied in n-butanol and is the HAPS compliant version of CYMEL® U-1050 resin. CYMEL® U-1050-10 resin has wide compatibility with other film formers and is useful in fast curing industrial baking finishes and low temperature curing conversion varnishes for wood.
CYMEL® U-1052-8
CYMEL® U-1052-8 resin is an n-butylated urea-formaldehyde crosslinking agent supplied in a mixture of n-butanol and xylene. It has excellent compatibility with epoxy resins and is particularly suitable for interior can coatings where it contributes to good adhesion and pasteurization resistance.
CYMEL® U-1054
CYMEL® U-1054 resin is a partially n-butylated urea crosslinking agent supplied in a mixture of n-butanol and ethanol. It is suitable for industrial heat cured primer formulations because of the excellent adhesion, water and corrosion resistance properties. In can coating formulations, this product provides an excellent balance between adhesion and film flexibility, especially after several cure cycles.
CYMEL® U-216-10LF
CYMEL® U-216-10LF Resin is an n-butylated urea resin which has excellent compatibility with hydrophobic resins, including epoxies. It is the exempt solvent version of CYMEL® 216-8 resin with the additional benefit of lower free formaldehyde. It was designed for metal deco coatings, can coatings and coil coating primers. This product may also be added as a leveling agent in cold-cure amine catalyzed epoxy resin systems.
CYMEL® U-216-8
CYMEL® U-216-8 resin is a partially n-butylated urea crosslinking agent supplied in a mixture of n-butanol and xylene. It displays excellent compatibility with most hydrophobic resins, such as epoxies, and can contribute to improved leveling and adhesion characteristics. This product is recommended as a crosslinking resin in primer coatings, can coatings, and metal deco finishes.
CYMEL® U-227-8
CYMEL® U-227-8 is a partially n-butylated urea crosslinker with a medium degree of alkylation, medium methylol content, rather low imino functionality, medium to low molecular weight and medium viscosity. It is recommended for use in epoxy/urea metal primers, metal decorating, and drum and dipping enamels.
CYMEL® U-65
CYMEL® U-65 resin is a high solids, methylated urea resin designed for use in both water and solvent-borne systems as a crosslinking agent for a variety of polymers that contain hydroxyl functionality.
CYMEL® U-662
CYMEL® U-662 is partially isobutylated urea-formaldehyde cross-linking agent with a medium degree of alkylation, a medium methylol content, a rather low imino functionality, a medium molecular weight and a medium high viscosity. It is very suitable for acid curing wood coating applications, where low formaldehyde emission is required.
CYMEL® U-663
CYMEL® U-663 is a partially isobutylated urea formaldehyde cross-linking agent with a medium degree of alkylation, a medium methylol content, a rather low imino functionality, a medium molecular weight, a medium high reactivity and a medium high viscosity. It is very suitable for acid curing wood coating applications, where low formaldehyde emission and high film gloss is required.
CYMEL® U-80
CYMEL® U-80 is a highly butylated urea formaldehyde resin with excellent compatibility with most film formers. It is soluble in most solvents and has excellent compatibility with aliphatic hydrocarbons. This product is suitable for a wide range of coating applications including high solids primers for automotive, general industrial, and container coatings providing improved film flexibility and adhesion and to various substrates.
CYMEL® UB-30-B
CYMEL® UB-30-B resin is a n-butylated urea crosslinker supplied in n-butanol. Its fast film hardness development combined with excellent adhesion properties makes it suitable for a wide range of industrial baking applications. Because of the limited UV resistance properties of urea resins, this product is not suitable for exterior applications.
CYMEL® UI-19-I
CYMEL® UI-19-I resin is a partially iso-butylated urea resin supplied in iso-butanol. The fast drying properties provide good block resistance and makes this product suitable for ambient and low bake industrial wood finishes.
CYMEL® UI-21-E
CYMEL® UI-21-E resin is a partially iso-butylated urea resin supplied in ethanol. It has been designed for a wide range of high build, low odor industrial wood finishes. CYMEL UI-21-E resin is not suitable for exterior applications.
CYMEL® UI-27-EI
CYMEL® UI-27-EI resin is a partially iso-butylated urea resin supplied in a mixture of ethanol and iso-butanol. It is suitable for use in both acid curing wood coating applications and general industrial primer and topcoat formulations. This product is not suitable for exterior applications.
CYMEL® UI-38-I Resin
CYMEL® UI-38-I resin is a partially iso-butylated urea crosslinker supplied in iso-butanol and intended for use in industrial stoving applications and especially systems applied by electrostatic spray. Because of the poor weathering resistance of urea resins, CYMEL® UI-38-I is not recommended for exterior applications.
CYMEL® XW 3106
CYMEL® XW 3106 resin is a specially alkylated, high solids melamine crosslinking agent designed for solvent-borne, two-pack ambient and low bake formulations. The low temperature cure potential for this crosslinker provides the opportunity to formulate high performance coatings for heat sensitive substrates. These systems have excellent early hardness, resistance properties, appearance and hot/cold cycle flexibility.
CYREZ® 963 Product Family (100% HMMM)
CYREZ® 963 resins are a portfolio of HMMM liquid resins used as a crosslinker for adhesion promoting and reinforcing systems in rubber applications. This product offers several advantages over the older hexa methylene tetramine (HEXA or HMT) system. CYREZ 963 products are available globally and producted in multiple manufacturing locations. Please contact your allnex representative regarding product availability in specific countries and regions.
CYREZ® 964 Product Family (65% HMMM)
CYREZ® 964 & 965 resins are a portfolio of HMMM-based resins using precipitated silica as a carrier. These resins are 65% active ingredient HMMM and function as adhesion promoter or crosslinker in the "HRH" dry rubber adhesion systems for bonding rubber to organic cord and wire reinforcement materials. This product offers several advantages over the older hexa methylene tetramine system. These products are available globally and producted in multiple manufacturing locations. Please contact your allnex representative regarding product availability in specific countries and regions.
DAOTAN® STW 6434/40WA
DAOTAN® STW 6434/40WA is a waterborne, polyester based aliphatic polyurethane dispersion. It is the NMP/NEP- free alternative for DAOTAN® (V)TW 6434. Due to high toughness and excellent elasticity DAOTAN® STW 6434/40WA is recommended as modifier resin for waterborne OEM primer-surfacers to improve stone chipping resistance.
DAOTAN® TW 1225/40WANEP
Daotan® TW 1225/40WANEP is an aqueous, aliphatic polyurethane dispersion which contains hydroxy groups. It has shear stability and pigment compatibility, giving highly flexible films.
DAOTAN® TW 1250/39WAMPP
DAOTAN® TW 1250/39WAMPP is an aromatic polyurethane-dispersion modified with drying fatty acids. It's used as a sole binder for corrosion protection systems.
DAOTAN® TW 1252/42WA
DAOTAN® TW 1252/42WA is a polyurethane dispersion modified with drying fatty acids, 42% solids in water (42WA), (containing also 3 % n-ethyl-2-pyrrolidone).
DAOTAN® TW 6425/40WA
Daotan® TW 6425/40WA is a hydroxy functional polyurethane dispersion with shear stability and pigment compatibility, giving highly flexible films when cured with isocyanates as well as melamine resins. These properties allow for the formulation of highly flexible coating systems especially for primers for plastics. Such systems have very good adhesion to polyamide, polycarbonate, ABS, as well as pretreated PP/EPDM.
DAOTAN® TW 6431/45WA
DAOTAN® TW 6431/45WA is a physically drying, solvent and surfactant free, aqueous aliphatic polyurethane-urea-dispersion based on polybutadiene. Fast drying and provides clear, crack free and highly flexible films. Main application of Daotan® TW 6431/45WA is coating and sealing of a wide variety of substrates, when flexibility and chemical resistance or even stripability of the coating is necessary.
DAOTAN® TW 6439/30WA
Daotan® TW 6439/30WA is recommended as the NMP/NEP- free alternative for Daotan (V)TW 1237. Alike latter Daotan TW 6439 is a polyester-based, high molecular weight polyurethane dispersion. Dried at ambient temperature, this product provides clear, crack-free films without further addition of organic solvents. These films also exhibit excellent elasticity and mechanical properties.
DAOTAN® TW 6442/42WA
DAOTAN® TW 6442/42WA is a Polyurethane dispersion modified with drying fatty acids.
DAOTAN® TW 6450/30WA
DAOTAN® TW 6450/30WA is a polycarbonate based aqueous aliphatic polyurethane dispersion. It is recommended as the NMP / NEP- free alternative for Daotan® (V)TW 1236. When dried at ambient temperatures, it creates clear, crack- free films without further addition of organic solvents or additives. These films exhibit excellent elasticity and mechanical properties as well as very good adhesion to different plastic substrates, adhesion for lamination applications, excellent block resistance up to 80C. DAOTAN® TW 6450/30WA belongs to the ECOWISE™ CHOICE product range for selected applications. (Contact your allnex representative for more information).
DAOTAN® TW 6451/32WA
DAOTAN® TW 6451/32WA is an aqueous, low-viscous polyurethane dispersion, polyester based with aromatic and aliphatic parts. It is recommended as the NMP / NEP- free alternative for Daotan (V)TW 1235. Alike latter Daotan TW 6451 is a polyesterbased, shear stable, high molecular weight polyurethane dispersion. Dried at ambient temperature Daotan TW 6451 is providing clear, crack- free films without further addition of organic solvents or additives. These films exhibit excellent elasticity and mechanical properties as well as very good adhesion to different plastic substrates.
DAOTAN® TW 6452/30WA
DAOTAN® TW 6452/30WA is an aqueous aliphatic polyurethane dispersion, polycarbonate based adhesion primer for plastic substrates, adhesive for lamination applications, excellent block resistance up to 80C. For waterborne plastic primer and plastic basecoats as well as auto OEM basecoats with highest requirements on optical appearance ("Flop"), water resistance as well as mechanical properties. DAOTAN® TW 6452/30WA belongs to the ECOWISE™ CHOICE product range for selected applications. (Contact your allnex representative for more information).
DAOTAN® TW 6464/36WA
Daotan® TW 6464/36WA is a shear stable, solvent-free, self-crosslinking acrylated polyurethane dispersion providing quick drying and good wetting properties. Cured films are clear - transparent with good chemical- and abrasion resistance.
DAOTAN® TW 6466/36WA
DAOTAN® TW 6466/36WA is an aqueous emulsion of an aliphatic urethane-acryl-hybrid, solvent and emulsifier free. It is a polyester- based, acrylic modified, high molecular weight polyurethane dispersion. The resin provides shear stability and is free of solvents and emulsifiers. Dried at ambient temperature DAOTAN® TW 6466 yields clear and crack-free films without any previous addition of solvents or paint additives.
DAOTAN® TW 6473/37WA
Daotan® TW 6473/37WA is a self-crosslinking, waterborne, acrylated, aliphatic polyurethane dispersion with strong hydrophilic features. It is fast drying and it provides clear and crack-free films. This product shows good wetting properties and it provides good shear stability and pigment compatibility.
DAOTAN® TW 6474/37WA
Daotan® TW 6474/37WA is an aqueous dispersion of an aliphatic polyurethane-acrylic hybrid. It is a hard grade polyurethane dispersion, particularly suitable as a combination partner for alkyd and acrylic emulsions, significantly improving the drying time and early hardness development. It can also be used for improving the flexibility of acrylic dispersion coatings.
DAOTAN® TW 6490/35WA
DAOTAN® TW 6490/35WA is a waterborne, aliphatic polyurethane dispersion, free of solvents and emulsifiers. (Adhesion) primer for plastic substrates, adhesive for lamination applications, highest elongation. It is recommended for waterborne plastic Primers and Basecoats.
DAOTAN® TW 6491/33WA
Daotan® TW 6491/33WA is a waterborne, high molecular weight, polyether- based Polyurethane dispersion, free of solvents and emulsifiers. Coatings based on Daotan TW 6491 provide quick drying and yield transparent, crack free films without further addition of co- solvents. Outstanding features are very high elasticity and elongation.
DAOTAN® TW 6493/35WA
DAOTAN® TW 6493/35WA is a waterborne, aliphatic polyurethane dispersion, free of solvents and emulsifiers. Dried at elevated temperature it provides transparent, crack-free films, where as for drying at ambient temperature additional solvents are needed.
DAOTAN® TW 6495/35WA
DAOTAN® TW 6495/35WA is a waterborne, aliphatic polyurethane dispersion, free of solvents and emulsifiers. Dried at elevated temperature it provides transparent, crack-free films. (Adhesion) primer for plastic substrates, adhesive for lamination applications, highest elongation, TEA-free. It is recommended for waterborne plastic primers and basecoats.
DAOTAN® TW 7000/40WA
Daotan® TW 7000/40WA is a polyurethane dispersion with low viscosity, free of organic solvents and emulsifiers. It is specifically recommended for plastic coatings (primer, basecoats, monocoats) for automotive interior/exterior industry, utility vehicles, for foil-coatings as well as for general industry (e.g. household articles).
DAOTAN® TW 7010/36WA
DAOTAN® TW 7010/36WA is a polyurethane dispersion with low viscosity, free of emulsifiers. It is specifically recommended for printing inks, plastic coatings (primer, basecoats, monocoats) for automotive interior/exterior industry, utility vehicles, for foil-coatings as well as for general industry (e.g. household articles). Highest water and chemical resistance, high Tg.
DAOTAN® TW 7050/34WA
DAOTAN® TW 7050/34WA is an acrylic modified high molecular weight polyurethane dispersion. The resin provides shear stability and is free of emulsifiers. Dried at ambient temperature Daotan TW 7050 yields clear and crack-free films without any previous addition of solvents or paint additives.
DAOTAN® TW 7061/35WA
DAOTAN® TW 7061/35WA is a polyester-based, acrylic modified high molecular weight polyurethane dispersion. The resin provides shear stability and is free of solvents and emulsifiers. Dried at ambient temperature Daotan TW 7061 yields clear and crack-free films without any previous addition of solvents or paint additives.
DAOTAN® TW 7063/36WA
DAOTAN® TW 7063/36WA is a polyester-based, acrylic modified high molecular weight polyurethane dispersion. The resin provides shear stability and is free of solvents and emulsifiers. Dried at ambient temperature Daotan TW 7063 yields clear and crack-free films without any previous additions of solvents or paint additives.
DAOTAN® TW 7064/36WA
DAOTAN® TW 7064/36WA is a shear stable, solvent-free, self-crosslinking acrylated polyurethane dispersion providing quick drying and good wetting properties. Cured films are clear - transparent with good chemical- and abrasion resistance.
DAOTAN® TW 7065/36WA
DAOTAN® TW 7065/36WA is a shear stable, solvent-free, self-crosslinking acrylated polyurethane dispersion providing quick drying and good wetting properties. Cured films are clear - transparent with good chemical and abrasion resistance.
DAOTAN® TW 7066/36WA
DAOTAN® TW 7066/36WA is a polyester-based, acrylic modified, high molecular weight polyurethane dispersion. The resin provides shear stability and is free of solvents and emulsifiers. Dried at ambient temperature Daotan TW 7066 yields clear and crack-free films without any previous addition of solvents or paint additives.
DAOTAN® VTW 1225/40WA
Daotan® VTW 1225/40WA is an aqueous, aliphatic polyurethane dispersion which contains hydroxy groups. It has highly flexible coating systems especially for primers and decorative top coats for plastics.
DAOTAN® VTW 1250/40WA
Daotan® VTW 1250/40WA is an aromatic polyurethane-dispersion modified with drying fatty acids. It's used as a sole binder for corrosion protection systems.
DAOTAN® VTW 1262/35WA
Daotan® VTW 1262/35WA is a polyurethane emulsion that needs no further film formers to give clear flexible films when dried at room temperature.
DAOTAN® VTW 1265/36WA
Daotan® VTW 1265/36WA is an aqueous, solvent-free, self crosslinking polyurethane dispersion. It can be preferably used for plastic coatings.
DAOTAN® VTW 1686/40WA
Daotan® VTW 1686/40WA is a polyester-modified acrylic dispersion containing epoxy groups used as sole binder or in combination with melamine resins and/or polyurethane dispersions for the production of waterdilutable industrial paints, e.g. base coats.
DAOTAN® VTW 2229/40WANMP
Daotan® VTW 2229/40WANMP is a hydroxy functional polyurethane dispersion with shear stability, pigment compatibility giving highly flexible films when cured with isocyanates as well as melamine resins. It is suited for formulating aqueous primer surfacers.
DAOTAN® VTW 6421/42WA
Daotan® VTW 6421/42WA is a waterborn, clear solution of polyurethane resin, and has excellent adhesion and flexibility properties. It can be used as additional binder in 1pack and 2pack coating formulations and adhesives.
DAOTAN® VTW 6460/35WA
Daotan® VTW 6460/35WA is an aqueous polyurethane dispersion, solvent-free. It is suitable for the formulation of aqueous, ambient temperature or force dried industrial coatings - especially aqueous basecoats for the automotive industry.
ACROCRYL™ 63-972
ACROCRYL™ 63-972 is a very hard, APEO free, high molecular weight acrylic copolymer emulsion with excellent gloss and clarity, excellent blanch and water resistance, very good toughness and flexibility and good solvent and alkali resistance. Pendant reactive groups on the polymer confer thermal or ambient-temperature crosslinking.
ACROPOL™ 63-075
ACROPOL™ 63-075 is a vinyl acetate homopolymer emulsion, providing good all-round formulating flexibility, excellent mechanical stability and fast-set characteristics. It is recommended for the formulation of packaging adhesives for most types of paper and board stock, and is also suitable for use as a base in compounded woodworking and building adhesives.
ACROPOL™ 63-899E
ACROPOL™ 63-899E is an APEO free high molecular weight vinyl acetate acrylic copolymer emulsion with good tint acceptance, stability to zinc oxide pigments and wide formulating latitude.
ACURE® 500
ACURE® 500 is a catalyst for use in ACURE systems is a catalyst for use in ACURE systems.
ACURE® 510-100
ACURE® 510-100 is a malonate functional polyester resin.
DPGDA
DPGDA (Dipropylene Glycol Diacrylate) is a difunctional reactive diluent that polymerizes when exposed to sources of free radicals. DPGDA is particularly useful in coatings and inks where improved flexibility and adhesion are desired in combination with good moisture resistance.
DPHA
Acrylated dipentaerythritol (DPHA) is a multifunctional reactive diluent that polymerizes when exposed to sources of free radicals. DPHA is particularly useful in ultraviolet light (UV) and electron beam (EB) curable coatings and inks where improved cure response, hardness and scratch/abrasion resistance are desired. DPHA is composed predominately of the penta- and hexa-acrylate esters of dipentaerythritol, with the overall composition represented by the included chemical structure.
DROKYD™ 6195-70
DROKYD™ 6195-70 is a fast drying soya based Short oil alkyd with 70% solids.
DUROFTAL® FC 9511/80BAC
DUROFTAL® FC 9511/80BAC is a fast curing hydroxy-functional polyester, modified with synthetic fatty acids, with approx. 4.5 % OH (on solid resin) that produces, in combination with aliphatic polyisocyanates, high quality ultra-high solids 2-pack polyurethane lacquers.
DUROFTAL® PE 6163/66SNABG
Duroftal® PE 6163/66SNABG is a slightly branched, oil-free, saturated polyester resin. It is preferably used in Coil Coating systems for steel and non-ferrous metals with a balanced ratio between flexibility, crosslinking density and hardness. The product shows very good properties under a multitude of application conditions.
DUROFTAL® PE 6607/60BGMP
DUROFTAL® PE 6607/60BGMP is an oil-free polyester resin. It has been especially developed as a replacement of epoxy resins for interior and exterior coatings for metal packaging goods (can coating). When combined with phenolic resins or amino resins, these lacquers neither contain BADGE, nor Bisphenol A.
DUROFTAL® PE 912/60SNA
Duroftal® PE 912/60SNA is an oil-free polyester for the use in solvent-born base- and topcoats.
DUROFTAL® PI 2801/78BAC
DUROFTAL® PI 2801/78BAC is a hydroxy-functional polyester. In combination with aliphatic polyisocyanates, it produces high quality, ultra high solids, two pack clear and pigmented topcoats for the automotive repair and industrial lacquer sectors. This product provides high hardness, excellent solvent- and chemical resistance, and superior weathering stability.
DUROFTAL® VPE 6104/60MPAC
Duroftal® VPE 6104/60MPAC is an oil-free, saturated polyester. It offers very good levelling at roller application, good deformability, and color stability. This product is especially suited for the production of cold-resistant tube coatings and sterilizable, cupping exterior can coatings and aerosol tin paints as well as sealers.
DUROFTAL® VPE 6117
Duroftal® VPE 6117 is an aliphatic polyester resin and contributes to increased solids content of the paint and to improved build, gloss and flexibility of the paint film.
DUROXYN® EF 2107w/45WA
DUROXYN® EF 2107W/45WA is an aqueous, cationic epoxy-resin ester developed for the production of 1-comp.-primers, with quick drying and high film hardness.
DUROXYN® EF 2410w/40WA
DUROXYN® EF 2410w/40WA is an aqueous, cationic epoxy-resin-ester for use in 1k stainblock primers, with quick drying and high film hardness. DUROXYN® EF 2410w/40WA also features adhesion to various metal substrates, flash rust resistance without the need for inhibitors, and equal to or better stain blocking properties compared to EF 2107.
DUROXYN® EF 900/60X
Duroxyn® EF 900/60X is an air-drying and stoving epoxy resin ester that is used in anticorrosive paint systems and primers, and zinc dust paints.
DUROXYN® EF 935/60X
Duroxyn® EF 935/60X is an air-drying and stoving epoxy resin ester. It has very rapid air-drying, excellent hardness flexibility and adhesion, and excellent resistance to alkali and colour retention. It's used in industrial stoving enamels and air-drying and stoving anticorrosive primers.
DUROXYN® SEF 968w
Duroxyn® SEF 968w is a non-drying epoxy-resin-ester. It is used as binder for glass fibre sizing. It is processed as approx. 33 % emulsion in water. For production of the emulsion Duroxyn SEF 968w is heated up at a temperature of approx. 50 °C.
DUROXYN® VAX 6127w/42WA
Duroxyn® VAX 6127W/42WA is an oxidatively drying epoxy resin ester in aqueous emulsion form. It has excellent corrosion resistance, high water stability, and good recoat-ability. It's a sole binder for air and forced drying anticorrosive primers and industrial coatings.
DUROXYN® VEF 4380w/35WA
Duroxyn® VEF 4380W/35WA is an oxidatively drying epoxy resin ester in aqueous emulsion form. It's a sole binder for air and forced drying anticorrosive primers and industrial coatings.
EBECRYL® 109
EBECRYL® 109 is an acrylate - methacrylate monomer blend, containing 50% of trimethylolpropane triacrylate (TMPTA) and 50% hydroxyethylmethacrylate (HEMA). It polymerizes when exposed to sources of free radicals. EBECRYL® 109 is particularly useful in coatings where a good thermal and/or chemical resistance are important. It is recommended for use in: coatings where chemical and/or thermal resistance is required, and solder and etch resists.
EBECRYL® 11
EBECRYL® 11 is a polyethylene glycol diacrylate derivative. Ebecryl®11, being 100% water soluble, is designed for use in applications needing this type of solubility.
EBECRYL® 110
EBECRYL® 110 is a monofunctional reactive diluent characterized by low viscosity and relatively low odor. It is used in ultraviolet light (UV) or electron beam (EB) cured coatings to control viscosity and increase flexibility. Suggested applications for EBECRYL® 110 include: coatings and screen inks on flexible and semi-rigid plastics including polyolefins, optical fiber coatings, and high refractive index coatings.
EBECRYL® 113
EBECRYL® 113 is a low odour aliphatic monofunctional diluting acrylate. It is recommended for use in ultraviolet light (UV) or electron beam (EB) curable coatings to increase flexibility and improve adhesion to plastics.
EBECRYL® 114
EBECRYL® 114 is a monofunctional reactive diluent characterized by low viscosity and relatively low odor. It is used in ultraviolet light (UV) or electron beam (EB) cured coatings and inks to control viscosity and increase adhesion and flexibility. It is recommended as a reactive diluent for: Coatings and screen inks on flexible and semi-rigid plastics including polyolefins, optical fiber coatings, and high refractive index coatings.
EBECRYL® 117
EBECRYL® 117 is a low odor aliphatic mono-functional diluting acrylate. It is recommended for use in ultraviolet light (UV) or electron beam (EB) curable coatings to increase flexibility and improve adhesion.
EBECRYL® 118
EBECRYL® 118 is an aromatic monofunctional acrylate that can be used as a reactive diluent in ultraviolet light (UV) or electron beam (EB) curing formulations. It is a good diluent for a variety of acrylated oligomers. In formulations, it can lower Tg and increase flexibility of the UV/EB cured polymer while maintaining strength and toughness and improve substrate adhesion.
EBECRYL® 119
EBECRYL® 119 is a trifunctional monomer that polymerizes when exposed to a source of free radicals. EBECRYL® 119 is an effective diluent compatible with a wide range of acrylated resins using in radiation curing applications. This material contains no residual TMPTA, as the base material does not include any TMP based products. EBECRYL® 119 has the ability to enhance reactivity, hardness, and chemical and wear resistance properties. EBECRYL® 119 is also popular in OPVs, inks and other types of coatings.
EBECRYL® 1200
EBECRYL® 1200 is used in UV curable coatings and is supplied as 55% in butyl acetate. It will be crosslinked to paint films with excellent hardness, flexibility and resistance to chemicals.
EBECRYL® 1205
EBECRYL® 1205 is an acrylic acrylate resin containing hydroxyl functionality and is supplied in ~48% by weight of butyl acetate. It is designed for use in dual cure systems combining ultraviolet (UV) or electron beam (EB) radical cure along with isocyanate/hydroxyl reaction. EBECRYL® 1205 is also useful as adhesion promoter in coatings standard UV/EB energy cured systems.
EBECRYL® 1258
EBECRYL® 1258 is a trifunctional aliphatic urethane acrylate diluted 20% by weight with hydroxypropylmethacrylate (HPMA) that does not contain any intentionally added organic tin compounds, heavy metals*, hydroquinone (HQ) or methyl ether of hydroquinone (MEHQ). Films of EBECRYL® 1258 cured by ultraviolet light (UV) or electron beam (EB) combine abrasion resistance, flexibility, and adhesion with resistance to yellowing.
EBECRYL® 1271
EBECRYL® 1271 is a difunctional aliphatic urethane acrylate that does not contain any intentionally added organic tin compounds, heavy metals*, hydroquinone (HQ) or methyl ether of hydroquinone (MEHQ). (Please note that quinones are present in many raw materials, so the overall quinone content is reduced, but not zero in EBECRYL® 1271.) Films of EBECRYL® 1271 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, adhesion, abrasion resistance, exterior durability, and are resistant to yellowing.
EBECRYL® 1290
EBECRYL® 1290 is a hexafunctional aliphatic urethane acrylate oligomer which provides extremely fast cure response when exposed to ultraviolet light (UV) or electron beam (EB). Cured films exhibit high hardness, abrasion and solvent resistance. It is recommended for use in scratch and abrasion resistant coatings (hardcoats), clear and pigmented coatings for paper, paperboard, wood, rigid plastics, and additive to improve cure speed, solvent resistance, and abrasion resistance.
EBECRYL® 1290N
EBECRYL® 1290N is a hexafunctional aliphatic urethane acrylate oligomer which provides extremely fast cure response when exposed to ultraviolet light (UV) or electron beam (EB). Cured films exhibit high hardness, abrasion and solvent resistance and low yellowing property. It is recommended for use in scratch and abrasion resistant coatings (hardcoats), clear and pigmented coatings for paper, paperboard, wood, rigid plastics, and additive to improve cure speed, solvent resistance, and abrasion resistance.
EBECRYL® 1291
EBECRYL® 1291 is a hexafunctional aliphatic urethane acrylate that does not contain any intentionally added organic tin compounds, heavy metals*, hydroquinone (HQ) or methyl ether of hydroquinone (MEHQ). It exhibits very fast cure response when exposed to ultraviolet light (UV) or electron beam (EB). Cured films of EBECRYL® 1291 demonstrate outstanding hardness, scratch and abrasion resistance, chemical resistance, and are resistant to yellowing.
EBECRYL® 130
EBECRYL® 130 is a cyclic aliphatic diacrylate useful as a reactive diluent in UV (ultra violet) or EB (electron beam) curable coatings and inks. It can impart a combination of hardness, toughness, and resiliency coupled with improved adhesion properties on various substrates. It is recommended for use in: scratch and abrasion resistant coatings, coatings requiring increased thermal resistance, and inkjet inks.
EBECRYL® 1300
EBECRYL® 1300 is designed as the letdown oligomer for UV thermoformable ink applications, and should be used in conjunction with the pigment grind oligomer, EBECRYL® 8413. EBECRYL® 1300 exhibits good adhesion promoting properties. Suggested applications for EBECRYL® 1300 include: displays / signage / POP, vending machine panels, packaging, sporting goods, architectural, electronics, appliance nameplates, housing, toys, and novelty items.
EBECRYL® 1360
EBECRYL® 1360 is a silicone hexa-acrylate material which contributes slip, substrate wetting and flow properties when used as an additive in formulations cured by UV or EB. Cured films containing EBECRYL® 1360 will exhibit a smooth, tack free surface, with good blocking resistance. It is recommended for use in: overprint varnishes, clear coatings on paper, plastics and metal, release coatings, and EB cure.
EBECRYL® 1365
EBECRYL® 1365 is a hexa-functional silicone modified urethane acrylate diluted in 50% of EBECRYL® 160. EBECRYL® 1365 can be used to prepare UV/EB curable coatings with low surface energy providing anti-stain and easy-to-clean properties. Additionally EBECRYL® 1365 can be used as a processing agent in matt and excimer curable formulations, facilitating a uniform film creation which in turn significantly increases the process robustness.
EBECRYL® 14
EBECRYL® 14 is a trifunctional-high molecular weight diluting oligomer which polymerizes when exposed to sources of free radicals. EBECRYL® 14 is water dispersable and provides high flexibility, chemical and abrasion resistance. EBECRYL® 14 is used in electronics, coatings and inks. It is free from labeling in skin sensitization or otherwise.
EBECRYL® 140
EBECRYL® 140 is a reactive diluent that is compatible with a wide range of acrylated resins used in UV/EB curing applications. Effective levels of EBECRYL® 140 typically range from 10% to 30%, depending on the application. In lithographic inks and varnishes it is quite effective in adjusting viscosity while maintaining or improving cure response and physical properties.
EBECRYL® 145
EBECRYL® 145 is an Xi-free aliphatic difunctional acrylate of low surface tension. Propoxylated (2) neopentyl glycol diacrylate exhibits good viscosity reducing and solvency characteristics in UV/EB curable formulations, and is an effective monomer for developing low viscosity and low volatility coatings and inks. It is recommended for use in clear & pigmented coatings, over print varnishes, liquid inks, and pressure sensitive adhesives.
EBECRYL® 160
EBECRYL® 160 is a reactive diluent commonly used in ultraviolet light (UV) and electron beam (EB) energy curable coatings and inks. It can be used to impart crosslinking to energy curable coatings and inks while maintaining a degree of flexibility and toughness. Of the common triacrylate diluents used in energy curable formulations, EBECRYL® 160 exhibits the highest reactivity and the greatest viscosity reduction of oligomers. EBECRYL® 160 is a reactive diluent compatible with a wide range of acrylated resins used in UV/EB curing applications. Hardness, abrasion resistance, and high gloss properties make EBECRYL®160 popular for overprint varnishes, inks, coatings and electronic applications such as photoresists.
EBECRYL® 1608
EBECRYL® 1608 is a diacrylate ester of bisphenol A epoxy resin diluted with 15% of oligotriacrylate (OTA 480). This resin is characterized by its low odour, light colour, low irritancy and very fast cure response. Formulated UV/EB curable products containing EBECRYL® 1608 may be applied by lithographic, screen, gravure, direct or reverse roll, and curtain coating methods. EBECRYL® 1608 is recommended for use in: overprint varnishes, lithographic and screen inks and varnishes, coatings on wood, cardboard, chipboard, paper and rigid plastics, paper upgrading, and coatings where low residual odour is required.
EBECRYL® 168
EBECRYL® 168 is an acidic methacrylate adhesion promoter designed as an additive for ultraviolet (UV) and electron beam (EB) curable coatings on metal. It is recommended for use in: general metal coatings and primers, coatings for galvanized pipe and tube, coil coatings, solder resist formulations.
EBECRYL® 170
EBECRYL® 170 is an acidic acrylate adhesion promoter designed as an additive for ultraviolet (UV) and electron beam (EB) curable coatings on metal. It is recommended for use in: general metal coatings and primers, coatings for galvanized pipe and tube, coil coatings, and solder resist formulations.
EBECRYL® 171
EBECRYL® 171 is a methacrylate modified acidic adhesion promoting agent designed as a modifier for ultraviolet (UV) and electron beam (EB) curable coatings. It is characterized by low viscosity, acid functionality, and adhesion on various substrates.
EBECRYL® 1859
EBECRYL® 1859 is a high molecular weight polyester acrylate especially developed for high speed UV, HUV, UV LED, and EB cured offset lithographic inks. EBECRYL® 1859 exhibits excellent lithographic behavior, very good pigment wetting and high reactivity.
EBECRYL® 1885
EBECRYL® 1885 is an undiluted polyesteracrylate resin. Films of EBECRYL® 1885 cured by ultraviolet light (UV) or electron beam (EB) exhibits high flexibility and excellent abrasion resistance. EBECRYL® 1885 is recommended for parquet floor and furniture applications.
EBECRYL® 204
EBECRYL® 204 is an aromatic urethane triacrylate oligomer diluted with 1,6 hexanediol diacrylate monomer. Films of EBECRYL® 204 cured by UV or EB exhibit good flexibility, abrasion resistance and adhesion to various substrates in combination with a good solvent resistance. It is recommended for use in: coatings on rigid and flexible plastics, wood coatings, screen inks, low gloss coatings, and conformal coatings.
EBECRYL® 205
EBECRYL® 205 is a tin-free aromatic urethane triacrylate oligomer diluted with 25% of tripropyleneglycol diacrylate (TPGDA)(1) monomer. Films of EBECRYL® cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, acceptable abrasion resistance, good adhesion to various substrates in combination with a good solvent resistance.
EBECRYL® 210
EBECRYL® 210 is an aromatic urethane diacrylate oligomer. Films of EBECRYL® 210 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, light colour and good adhesion to various substrates. It is recommended for use in: coatings on rigid and flexible plastics, wood coatings, screen inks, low gloss coatings, conformal coatings, and flexibilizing other UV/EB curable products.
EBECRYL® 220
Ebecryl® 220 is a hexafunctional aromatic urethane acrylate that provides very fast cure response when exposed to UV or an electron beam. It is recommended for use in: wood coatings and fillers, lithographic inks, scratch resistant coatings on plastic, improving cure speed, solvent resistance and gloss.
EBECRYL® 2221
EBECRYL® 2221 is a hexafunctional aromatic urethane acrylate oligomer which provides very fast cure response when exposed to ultraviolet light (UV) or electron beam (EB). Cured films of EBECRYL® 2221 exhibit high hardness and solvent resistance. Formulated UV/EB curable products containing EBECRYL® 2221 may be applied by lithographic, screen, gravure, direct or reverse roll, and curtain coating methods.
EBECRYL® 225
EBECRYL® 225 is a ten functional aliphatic urethane acrylate. After polymerization, films of EBECRYL® 225 exhibit outstanding surface hardness and low haze development after abrasion. In addition, EBECRYL® 225 does not contain intentionally added organic tin compounds, heavy metals or quinones.
EBECRYL® 230
EBECRYL® 230 is an undiluted high molecular weight aliphatic urethane diacrylate resin, characterized by its light colour. This resin is most often used as an additive to improve the flexibility of finished formulations. It is recommended for use in: lithographic and screen inks, coatings for plastics and metals, laminating adhesives, flexibilizers for other UV/EB curable products, and non-yellowing coatings.
EBECRYL® 244
EBECRYL® 244 is an aliphatic urethane diacrylate oligomer diluted with 10% of 1,6 hexanediol diacrylate (HDDA)(2) monomer. It is characterized by its light colour and good cure response. It s recommended for use in: flexible screen inks and coatings, Light stable coatings, electrical insulation coatings, and coatings where a minimum of water absorption is desired (absorbs less than 1% water/24 hr. immersion).
EBECRYL® 246
EBECRYL® 246 is a difunctional aliphatic urethane acrylate that does not contain any intentionally added organic tin compounds, heavy metals*, hydroquinone (HQ) or methyl ether of hydroquinone (MEHQ). (Please note that quinones are present in many raw materials, so the overall quinone content is reduced, but not zero in EBECRYL 246.) Films of EBECRYL 246 cured by ultraviolet light (UV) or electron beam (EB) exhibit excellent abrasion resistance, toughness and flexibility, and are resistant to yellowing.
EBECRYL® 249
EBECRYL® 249 is an aliphatic urethane methacrylate diluted with 25% trimethylolpropane trimethacrylate (TMPTMA). Films of EBECRYL® 249 cured by electron beam (EB) or ultraviolet light (UV) exhibit good exterior durability, good adhesion and a high order of scuff and abrasion.
EBECRYL® 250
EBECRYL® 250 is an undiluted high molecular weight aliphatic urethane diacrylate resin, characterized by its light colour. Films of EBECRYL® 250 cured by exposure to ultraviolet light (UV), electron beam (EB) or by means of peroxide are soft and flexible, exhibiting the inherent non-yellowing properties typical of an aliphatic urethane. This resin is most often used as an additive to improve the flexibility of finished formulations.
EBECRYL® 264
EBECRYL® 264 is an aliphatic urethane triacrylate diluted 15% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDODA). Films of EBECRYL® 264 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, abrasion resistance, and are resistant to yellowing. It is recommended for use in: coatings for wood flooring, plastic coatings, overprint varnishes, screen inks, and light stable coatings.
EBECRYL® 266
EBECRYL® 266 is a Sn-free, aliphatic urethane triacrylate oligomer diluted with 25% of tripropyleneglycol diacrylate (TPGDA)(1) monomer. EBECRYL® 266 is characterized by light colour and good cure response. Films of EBECRYL® 266 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, toughness, abrasion resistance and light stable properties typical of an aliphatic urethane.
EBECRYL® 267
EBECRYL®267 is a modified aliphatic urethane acrylate oligomer. When cured by ultraviolet light (UV) or electron beam (EB), coatings of EBECRYL®267 exhibit high abrasion resistance, with balanced flexibility and hardness.
EBECRYL® 270
EBECRYL® 270 is an aliphatic urethane diacrylate oligomer. Films of EBECRYL® 270 cured by UV or EB exhibit good flexibility, adhesion, abrasion resistance and exterior durability, as well as the excellent non-yellowing properties typical of an aliphatic urethane. It is recommended for use in: coatings for wood and plastic requiring good exterior durability, coatings for rigid and flexible plastics, metal coatings, and low gloss coatings.
EBECRYL® 284
Ebecryl® 284 is an aliphatic urethane diacrylate oligomer diluted with 12% of 1,6 hexanediol diacrylate monomer. Films of this product cured by UV or EB, exhibit excellent exterior durability, toughness and good flexibility, as well as the non-yellowing properties typical of an aliphatic urethane. It is recommended for use in: coatings for wood and plastics requiring excellent exterior durability, clear coatings for cork and plastics like plasticized PVC, metal coatings, pigmented coatings for wood, paper and plastics, paper upgrading, and finish base for wood and PVC floor covering.
EBECRYL® 2959
EBECRYL® 2959 is an acrylated epoxy resin. Films of EBECRYL® 2959 cured by ultraviolet light (UV) or electron beam (EB) exhibit good hardness, high gloss and the good solvent resistance typical for an epoxy resin. EBECRYL® 2959 finds its use in a wide range of inks and coatings.
EBECRYL® 303
EBECRYL® 303 is a clear liquid polymeric resin in 1,6 hexanediol diacrylate (HDDA). It has been developed to improve the adhesion of inks and varnishes onto plastics. It is recommended for use in: screen printing applications, flexographic applications, letterpress applications, and inks and varnishes onto plastics.
EBECRYL® 3105
EBECRYL® 3105 is a low viscosity, flexible, epoxy acrylate which is easier for the formulator to handle. Films of EBECRYL® 3105 cured using ultraviolet light (UV) or electron beam (EB) has good flexibility, toughness and adhesion to wood. It is recommended for use in: primers for wood, and clear coatings for paper, wood, flexible and rigid plastics.
EBECRYL® 3300
EBECRYL® 3300 is a highly reactive epoxy acrylate, diluted in DPGDA. When formulated and cross-linked with other suitable radiation curable oligomers and reactive diluents, it results in durable, hard-elastic and chemically resistant coating films of high quality. It is recommended for use in clear or pigmented coatings on metal substrates, and coatings for paper, paperboard, wood, chipboard and rigid plastics where a compromise between adhesion, flexibility and hardness is necessary.
EBECRYL® 331
EBECRYL® 331 is a wetting and dispersing agent for solvent-free and solvent containing UV systems. It is a low molecular weight additive, which is able to deflocculate and stabilize pigments very actively through electrical charging at the pigment surface. Due to the high wetting power of Ebecryl® 331, coatings/inks with high gloss and improved colour strength can be achieved. It prevents settling of pigments/extenders and offers good levelling.
EBECRYL® 340
EBECRYL® 340 is a silicone free slip additive master batch.
EBECRYL® 3416
EBECRYL® 3416 is an UV curable highly reactive epoxy acrylate, which may be cross-linked with suitable reactive diluters to especially durable, hard elastic and chemically resistant paint films of high quality. In conjunction with EBECRYL® 8306 and EBECRYL® 171 it is used for metal coatings with excellent adhesion and corrosion resistance. It is used for metal coatings with excellent adhesion and corrosion resistance.
EBECRYL® 3420
EBECRYL® 3420 is a low viscosity, modified epoxy acrylate with good pigment wetting ability. It is specially suited for UV offset lithography and UV flexo inks but can of course be used for other applications such as screen, gravure, OPV.
EBECRYL® 350
EBECRYL® 350 is a silicone diacrylate that improves slip, substrate wetting, and coating flow and leveling when used as an additive in formulations cured by ultraviolet light (UV) or electron beam (EB). Cured films containing EBECRYL® 350 will exhibit a smooth, tack free surface, with good blocking resistance. Because of its acrylate functionality, the silicone cures into the polymeric backbone, thus eliminating the migration that free silicones often display in coatings. EBECRYL® 350 is recommended for use in: overprint varnishes, clear coatings on paper, plastics and metal, and release coatings.
EBECRYL® 3500
EBECRYL® 3500 is a modified epoxy diacrylate that exhibits relatively low viscosity, outstanding performance in many wood coating applications, and adhesion to many plastics. Films of EBECRYL® 3500 cured by ultraviolet light (UV) or electron beam (EB) demonstrate good flexibility, high gloss, toughness, adhesion and superior chemical resistance.
EBECRYL® 3600
EBECRYL® 3600 is an amine modified epoxy acrylate that exhibits exceptionally fast cure via exposure to ultraviolet light (UV). Films of EBECRYL® 3600 cured by UV or electron beam (EB) demonstrate high gloss and hardness combined with excellent chemical resistance. The amine modification can also improve adhesion to plastics. It is recommended for use in: clear coatings for paper and plastic, wood topcoats, wood fillers and sealers, and screen inks and coatings
EBECRYL® 3639
EBECRYL® 3639 is a special epoxy acrylate exhibiting good flexibility and very high reactivity. It is especially recommended to formulate radiation curable coatings and inks with good flexibility, very high reactivity and outstanding scratch and chemical resistances.
EBECRYL® 367
EBECRYL® 367 is a polyester acrylate designed to be used at additive levels in UV/EB inks and coatings to improve adhesion onto plastic substrates. It is characterized by its low viscosity and low acidity.
EBECRYL® 3700
EBECRYL® 3700 is the diacrylate ester of a bisphenol A epoxy resin, and exhibits low odor and exceptional cure response. Films of EBECRYL® 3700 cured by ultraviolet light (UV) or electron beam (EB) demonstrate high surface hardness, high gloss, and excellent chemical resistance. It finds broad use in UV/EB applications, such as coatings, overprint varnishes, inks, adhesives, and electronics.
EBECRYL® 3701
EBECRYL® 3701 is a modified bisphenol A epoxy diacrylate. It imparts flexibility and toughness to ultraviolet light (UV) or electron beam (EB) cured coatings and inks while maintaining such desirable properties as fast cure response and superior chemical resistance that are typical of standard epoxy acrylates. It is recommended for use in: clear coatings for paper, wood, and rigid plastic, adhesives for paper and film lamination, and lithographic, screen and flexographic ink vehicles.
EBECRYL® 3702
EBECRYL® 3702 is a fatty acid modified bisphenol A epoxy diacrylate that exhibits outstanding flow and leveling and pigment wetting properties. Films of EBECRYL® 3702 cured by ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, improved water resistance and good chemical resistance. It is recommended for use in: clear coatings for paper, overprint varnishes, lithographic ink vehicles, vehicles for metal decorating inks and clear coatings, screen ink vehicles, and coatings for rigid and flexible plastics.
EBECRYL® 3748/20
EBECRYL® 3748/20 is a bisphenol A epoxy diacrylate, diluted 20% by weight with the reactive diluent glycerol propoxylate triacrylate (OTA 480)(1) for reduced viscosity and easier handling. EBECRYL® 3748/20 exhibits light color and fast cure response. Films of EBECRYL® 3748/20 cured via exposure to ultraviolet light (UV) or electron beam (EB) demonstrate high surface hardness, gloss and excellent chemical resistance.
EBECRYL® 40
EBECRYL® 40 is a tetrafunctional polyether acrylate characterized by low viscosity, mild odor and light color. When formulated with acrylate oligomers, it provides fast cure response in ultraviolet light (UV) and electron beam (EB) curable coatings and inks. It is recommended for use in: offset inks as a reactive oligomer, overprint varnishes, coatings on paper, plastics, cardboard, and paper upgrading.
EBECRYL® 4100
EBECRYL® 4100 is an undiluted, unsaturated aliphatic urethane acrylate designed for coatings on wood, cork, furniture, paper, parquet and film. It offers good chemical resistant properties, good mechanical resistant properties, and high flexibility.
EBECRYL® 411
EBECRYL® 411 is a modified polyester resin for flexographic narrow web and rotary screen applications. It was developed for low viscosity inks and coatings with excellent adhesion to unprimed OPP films. EBECRYL® 411 is diluted with dipropyleneglycol diacrylate (DPGDA)(1) monomer.
EBECRYL® 4141
EBECRYL® 4141 is an undiluted Isocyanate-bearing urethane acrylate designed for use in two-component systems for coatings on wood, plastic and metal. It can be combined with hydroxyl-bearing resins to formulate coatings which cure by dual-cure process (UV-induced polymerization and NCO/OH reaction). The product is also used in pure UV-curing coatings to improve the adhesion on critical substrates as plastic, metal and exotic woods.
EBECRYL® 4150
EBECRYL® 4150 is an undiluted Isocyanate-bearing urethane acrylate designed for use in two-component systems for coatings on wood, plastic and metal. EBECRYL® 4150 is combined with hydroxyl-bearing resins to formulate coatings which cure by dual-cure process (UV-induced polymerization and NCO/OH reaction). The product is also used in pure UV-curing coatings to improve the adhesion on critical substrates as plastic, metal and exotic woods.
EBECRYL® 4175
EBECRYL® 4175 is a hard unsaturated wax-free polyester resin recommended for use in cost-effective UV-curing primers and coatings for wood that is diluted with 25% dipropyleneglycol diacrylate (DPGDA). It is used in formulation of radiation-curing (UV and EB) coating for application by roller coating, spraying and curtain coating on wood, cork and furniture. EBECRYL® 4175 can be used to formulate clear high-gloss to matt UV- curing systems.
EBECRYL® 418
EBECRYL® 418 is a chlorinated polyester resin, free from intentionally added Bisphenol A, diluted in OTA 480. Films of EBECRYL® 418 cured by ultraviolet (UV) or electron beam (EB) display good adhesion to metals, plastics and paper.
EBECRYL® 4201
EBECRYL® 4201 is an undiluted, unsaturated aliphatic urethane acrylate designed for wood coatings (cork and parquet) with a high grit feeder abrasion resistance. Coatings based on EBECRYL® 4201 are characterized by high elasticity, good chemical and mechanical resistance properties, and outstanding abrasion resistance, in particular according to the grit feeder method.
EBECRYL® 4220
EBECRYL® 4220 is an aliphatic urethane acrylate diluted 25% in tripropyleneglycol diacrylate (TPGDA)(1). It produces tough coatings that resist yellowing. This product is designed for use in the formulation of UV/EB energy curable coatings for application by roller coating, spraying and curtain coating on wood, cork, furniture, paper, parquet, plastics and film.
EBECRYL® 4250
EBECRYL® 4250 is an undiluted isocyanate functional urethane acrylate designed for use as adhesion promoter in UV and EB coatings. It may be combined with hydroxyl-bearing resins to formulate coatings which cure by dual-cure process (UV-induced polymerization and NCO/OH reaction). EBECRYL® 4250 is also used in pure UV-curing coatings to improve the adhesion on critical substrates as plastic, metal, and exotic woods. EBECRYL® 4250 is suitable for the formulation of moisture-curing one-component polyurethane coatings, especially for one-component adhesion primers.
EBECRYL® 4265
EBECRYL® 4265 is an aliphatic urethane acrylate without reactive diluent. It is characterized by its low viscosity and yields coatings with good chemical and mechanical properties. This product is designed for use in the formulation of UV/EB energy curable coatings for application by roller coating, spraying and curtain coating on wood, cork, furniture, paper, parquet, plastics and film.
EBECRYL® 4266
EBECRYL® 4266 is a modified aromatic epoxy acrylate without reactive diluent that is used in the formulation of UV/EB energy curable coatings. Coatings based on this product are characterized by their good sandability and high abrasion resistance. UV/EB cured polymers of EBECRYL® 4266 exhibit a balance of hardness and flexibility. It is designed for use in the formulation of UV/EB energy curable coatings for application by roller coating, spraying and curtain coating on wood, cork, furniture, paper, parquet and film.
EBECRYL® 438
EBECRYL® 438 is a reactive chlorinated polyester resin diluted 40% with the reactive diluent OTA-480. It exhibits good lithographic behavior and pigment wetting properties, and fast cure response in ultraviolet light (UV) curable coatings and inks. Films of EBECRYL® 438 cured by ultraviolet light (UV) display good adhesion to metals, plastics and paper.
EBECRYL® 4381
EBECRYL® 4381 is a unsaturated polyester resin diluted in 30% dipropyleneglycol diacrylate (DPGDA). It is recommended to use in highly reactive radiation curing primers and coatings (UV and electron beam). Primers and coatings can be applied on wood by roller-coating and curtain coating.
EBECRYL® 4396
EBECRYL® 4396 is an undiluted isocyanate aliphatic functional urethane acrylate designed for use in UV/EB coatings and in two component dual cure systems for coatings on wood, plastic and metal. It can be combined with hydroxyl functional resins to formulate coatings which cure by dual processes; UV/EB induced polymerization and NCO/OH reaction. The product is also used in straight UV/EB curing coatings to improve the adhesion on substrates such as plastic, metal and exotic woods.
EBECRYL® 4397
EBECRYL® 4397 is an undiluted Isocyanate-bearing urethane acrylate designed for use in two-component systems for coatings on wood, plastic and metal.
EBECRYL® 441
EBECRYL® 441 is a modified chlorinated polyester, free from intentionally added Bisphenol A. Films of EBECRYL® 441 cured by ultraviolet (UV) or electron beam (EB) display good adhesion to metals, plastics and paper.
EBECRYL® 445
Ebecryl®445 is a chlorinated polyester resin diluted with 40% of trimethylolpropane triacrylate (TMPTA) monomer. Ebecryl®445 exhibits good wet lithographic behaviour and pigment wetting properties. UV (ultraviolet light) cured films based on Ebecryl 445, display good adhesion to metals, plastics and paper.
EBECRYL® 4491
EBECRYL® 4491 is an aliphatic urethane acrylate supplied in 20% isobornyl methacrylate (IBOMA). It is designed for use in formulations of ultraviolet (UV) and electron beam (EB) energy curable coatings. Coatings based on EBECRYL 4491 are characterized by very high flexibility and elongation at break. Cured films display rubber-elastic properties.
EBECRYL® 45
Ebecryl® 45 is a low viscosity diluting oligomer. This tetra-functional acrylated oligomer is characterized by its low odour and light colour. Ebecryl® 45 provides a fast cure response when cured via ultraviolet light (UV) or electron beam (EB). Besides its high reactivity, Ebecryl® 45 improves the hardness and solvent resistance of cured inks and coatings.
EBECRYL® 450
EBECRYL® 450 is a fatty acid modified polyester hexaacrylate. Because of the special structure of the backbone and the high acrylic functionality, EBECRYL® 450 provides the proper hydrophilic-lipophilic balance necessary for lithography, combined with high reactivity when cured by ultraviolet light (UV) or an electron beam (EB). EBECRYL® 450 is recommended for: fast curing lithographic inks and clear varnishes, and improving lithographic behavior as an additive.
EBECRYL® 4501
EBECRYL® 4501 is an undiluted aromatic urethane acrylate designed for wood coatings (cork and parquet) with a high grit feeder abrasion resistance. UV/EB coatings based on EBECRYL® 4501 are characterized by high flexibility, good coin scratch resistance, and high abrasion resistance, in particular according to the grit feeder method.
EBECRYL® 4510
EBECRYL® 4510 is an isocyanate functional aliphatic urethane acrylate supplied at 90% solids in butyl acetate. It is useful as an adhesion promoter ultraviolet (UV) and electron beam (EB) energy curable coatings and in two-component dual cure coatings. It can be combined with hydroxyl functional resins to formulate coatings which cure by dual processes; UV/EB induced polymerization and NCO/OH reaction. The product is also used in straight UV curing coatings to improve the adhesion on substrates as plastic, metal and exotic woods.
EBECRYL® 4513
EBECRYL® 4513 is an aliphatic urethane acrylate supplied for use in formulations of ultraviolet (UV) and electron beam (EB) energy curable coatings. EBECRYL® 4513 exhibits elastic properties making it suitable for use flexible substrates. Coatings formulated with EBECRYL® 4513 also demonstrate high chemical and wear resistance and are highly resistant to yellowing.
EBECRYL® 452
EBECRYL® 452 is a low viscosity polyester acrylate oligomer. Because of the chemical structure of the backbone of this molecule it gives exceptional pigment wetting properties. This combined with the low viscosity of this material (typically 600 mPa.s at 25°C) makes it ideal as a pigment grinding resin. EBECRYL® 452 also gives a fast cure response when formulated with other oligomers and cured via ultraviolet light (UV) or electron beam (EB). EBECRYL® 452 is used for the preparation of high pigment loading pigment pastes produced using a triple roll mill or bead mill. EBECRYL® 452 can be used for grinding all process colours and spot colours.
EBECRYL® 4587
EBECRYL® 4587 is a solvent-free, water emulsifiable aliphatic urethane acrylate for use in ultraviolet (UV) and electron beam (EB) energy curable coatings. Coatings based on EBECRYL® 4587 are characterized by high gloss, scratch resistance, and resistance to water, alcohol, solvents, and household chemicals. EBECRYL® 4587 allows the formulation of UV/EB energy curable waterborne coatings free of reactive diluents, solvents and amines, as clear or pigments systems in glossy or matt finishes.
EBECRYL® 4655
EBECRYL® 4655 is an aliphatic urethane acrylate supplied at 60% solids in n-butyl acetate. Films of EBECRYL® 4655 are nearly physically dry after evaporation of the solvent. EBECRYL® 4655 exhibits high reactivity in ultraviolet (UV) and electron beam (EB) energy curable coatings and yields hard, non-brittle coatings. Coatings based on EBECRYL® 4655 demonstrate good exterior durability, resistance to yellowing and different chemicals and have good mechanical resistance properties.
EBECRYL® 4666
EBECRYL® 4666 is a weather-stable aliphatic urethane acrylate having a relatively low viscosity due to the allophanate structure. Formulations based on EBECRYL® 4666 exhibit high reactivity and result in hard coatings. EBECRYL® 4666 is used in the formulation of UV/EB energy curable coatings for wood and plastic substrates via the roller coating, spray or curtain coating processes.
EBECRYL® 4680
EBECRYL® 4680 is an aliphatic urethane acrylate diluted 20% by weight with 1,6-hexanediol diacrylate (HDDA). It exhibits good reactivity and produces hard, tough coatings. EBECRYL® 4680 is designed for use in the formulation of UV/EB energy curable coatings for application by roller coating, spraying and curtain coating on wood, cork, furniture, paper, parquet plastics and film.
EBECRYL® 4683
EBECRYL® 4683 is an aliphatic urethane acrylate diluted 35% by weight with isobornyl acrylate (IBOA)(1) used in the formulation of ultraviolet light (UV) and electron beam (EB) energy curable coatings. EBECRYL® 4683 exhibits good reactivity and produces hard, tough coatings particularly suited for protective coating on metal.
EBECRYL® 4690
EBECRYL® 4690 is an energy-curable, Tin-free, urethane acrylate with ~27% bio-carbon offering and an excellent outdoor durability for clear and pigmented coats. This solvent-free product presents a high reactivity for an effective productivity and brings high hardness after cure with excellent substrate protection.
EBECRYL® 4738
EBECRYL® 4738 is a weather-stable aliphatic urethane acrylate having a relatively low viscosity due to the allophanate structure. Formulations based on EBECRYL® 4738 exhibit high reactivity and result in hard coatings.
EBECRYL® 4740
EBECRYL® 4740 is a weather-stable aliphatic urethane acrylate having a low viscosity due to the allophanate structure. Formulations based on EBECRYL® 4740 exhibit high reactivity and yield tough and elastic polymers. Coatings formulated with EBECRYL® 4740 are characterized by very good chemical and mechanical resistances, scratch resistance, abrasion resistance and high resistance to yellowing.
EBECRYL® 4744
EBECRYL® 4744 is a polyester acrylate for use in the formulation of ultraviolet light (UV) or electron beam (EB) energy curable coatings. It exhibits a very balanced property profile and is suitable for use as the sole binder or used in combination with other binders to set specific properties. EBECRYL® 4744 is used in the formulation of UV/EB coatings for wood, furniture, paper, parquet and films applied by roll, spray and curtain coating processes.
EBECRYL® 4765
EBECRYL® 4765 is an isocyanate functional aliphatic urethane acrylate supplied in ethyl acetate and designed for use in UV/EB coatings and in two component dual cure systems for coatings on wood, plastic and metal. It can be combined with hydroxyl-bearing resins to formulate coatings which cure by dual-cure process; UV/EB induced polymerization and NCO/OH reaction.
EBECRYL® 4820
EBECRYL® 4820 is a urethane acrylate featuring good hardness, excellent chemical resistance, poor yellowing, and excellent weather resistance. It is used for coatings on various substrates.
EBECRYL® 4857
EBECRYL® 4857 is a low viscosity, monomer free aliphatic urethane diacrylate which exhibits good flexibility when cured by ultraviolet light (UV) or electron beam (EB). EBECRYL® 4857 is designed to show low yellowing and good outdoor resistance. Due to its low Tg EBECRYL® 4857 is also suitable for applications requiring haptic properties (e.g. “soft touch”). EBECRYL® 4857 is compatible with variety of fillers, pigments, waxes, and polymeric beads allowing formulator maximum formulating latitude to create a number of haptic properties ranging from a smooth, silky to peachy feel.
EBECRYL® 4858
EBECRYL® 4858 is a low viscosity aliphatic urethane diacrylate. Due to a low intrinsic viscosity, it offers ease of formulating in energy curable systems that are low in viscosity with high oligomer content. Films of EBECRYL® 4858 cured by ultraviolet light (UV) or electron beam (EB) exhibit good hardness, optically clarity, low color and good impact resistance. It is recommended for use in: in-mold decoration (IMD), films and flexible sheets coatings, diluent for higher viscosity resins, silk screen inks, and overprint varnishes on paper and plastic films.
EBECRYL® 4859
EBECRYL® 4859 is a difunctional aliphatic urethane methacrylate that does not contain any intentionally added organic tin compounds, heavy metals, hydroquinone (HQ) or methyl ether of hydroquinone (MEHQ). Due to a low intrinsic viscosity, EBECRYL® 4859 offers ease of formulating in energy curable systems that are low in viscosity with high oligomer content. Films of EBECRYL® 4859 cured by ultraviolet light (UV) or electron beam (EB) exhibit good hardness, optically clarity, low color and good impact resistance.
EBECRYL® 4883
EBECRYL® 4883 is an aliphatic urethane diacrylate diluted 15% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA). Films of EBECRYL® 4883 cured by ultraviolet light (UV) or electron beam (EB) combine abrasion resistance, flexibility, and adhesion with good exterior durability and resistance to yellowing. It is recommended for use in: post-formable coatings for metal tube and conduit, non-yellowing topcoats for wood, silkscreen inks for plastics, and exterior durable coatings.
EBECRYL® 4900
EBECRYL® 4900 is a Sn-free aliphatic hydroxy-functional urethane acrylate oligomer diluted in 40% butyl acetate. It combined with NCO functional compounds such as EBECRYL® 4950 are particularly suitable for deep draw thermoformable coatings with high elongation properties after thermal curing and after subsequent UV curing. Excellent performances are also reflected in chemical and stain resistance, hardness and abrasion resistance.
EBECRYL® 4950
EBECRYL® 4950 is an isocyanate-bearing aliphatic urethane acrylate diluted in 20 % butyl acetate. EBECRYL® 4950 can be combined with traditional hydroxyl (OH) functional binders or OH-acrylate functional binders, such EBECRYL® 4900, to form dual cure coatings (thermal NCO/OH and UV cure). EBECRYL® 4950 improves crosslink density, reactivity, and imparts scratch-, stain-, and abrasion resistance after UV cure.
EBECRYL® 50
EBECRYL® 50 is the tetraacrylate ester of 5 mole ethoxylated pentaerythritol. It is a low viscosity diluting oligomer characterized by low odor and light color. EBECRYL® 50 provides fast cure response in ultraviolet light (UV) or electron beam (EB) cured coatings and inks. Besides its high reactivity, EBECRYL® 50 improves the hardness and solvent resistance of cured coatings and inks. This product is particularly useful in offset inks, flexo inks and overprint varnishes.
EBECRYL® 5129
EBECRYL® 5129 is a hexafunctional aliphatic urethane acrylate oligomer which provides fast cure response when exposed to ultraviolet light (UV) or electron beam (EB). Cured films of EBECRYL 5129 exhibit high hardness, abrasion and solvent resistance combined with a good flexibility.
EBECRYL® 5130
EBECRYL® 5130 is a low viscous hexafunctional aliphatic urethane acrylate that provides extremely fast cure response when exposed to ultraviolet light (UV) or electron beam (EB). Cured films of EBECRYL® 5130 exhibit high hardness and low - yellowing on top of outstanding mechanical and chemical resistances. It is particularly suitable for spray applications.
EBECRYL® 524
EBECRYL® 524 is an acid-modified polyester diluted 30% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDODA)(1). It is used as the primary or modifying oligomer in UV or EB curable formulations to increase adhesion to a variety of substrates including paper, plastics and metal. It is recommended for: laminating adhesives, particularly between paper/aluminum, paper/LDPE, paper/polypropylene and aluminum/LDPE, primer coatings on metal, metallization receptive coatings on plastics, and improving intercoat adhesion.
EBECRYL® 525
Ebecryl® 525 is a modified polyester resin diluted with 40% of tripropyleneglycol diacrylate. Films of Ebecryl® 525 cured by UV or EB are soft and flexible, with good adhesion to paper, plastics and metals, making this product especially suited for use in laminating adhesives. It is recommended for use in: screen ink vehicles with good intercoat adhesion, adherable primer coating on metals, and laminating adhesives, particularly between paper/aluminium, paper/LDPE, paper/polypropylene, aluminium/LDPE.
EBECRYL® 570
EBECRYL® 570 is a chlorine free polyester resin diluted with of EBECRYL® 40. This resin provides good adhesion to plastic substrates. Films of EBECRYL® 570 cured by ultraviolet light (UV) or electron beam (EB) have low odour. It is recommended for use in: sensitive applications such as food packaging, and over print varnishes for plastic and metallic substrates.
EBECRYL® 571
EBECRYL® 571 was specifically developed for use in flexographic printed shrink sleeve applications. It is a modified polyester resin diluted with 40% of dipropyleneglycol diacrylate (DPGDA) and exhibits good pigment wetting properties. EBECRYL® 571 is recommended for: flexographic inks and coatings for shrink sleeve applications.
EBECRYL® 575
EBECRYL® 575 is a chlorine free polyester resin diluted with EBECRYL® 892. It has been specifically designed to provide good adhesion to plastic substrates. Films of EBECRYL®575 cured by ultraviolet light (UV) or electron beam (EB) result in good hardness.
EBECRYL® 5781
EBECRYL® 5781 is a low viscosity bio-based diacrylate. When properly formulated, coatings and inks based on EBECRYL® 5781 cured by ultraviolet light (UV) or electron beam (EB) energy display high reactivity with good hardness and scratch resistance.
EBECRYL® 5848
EBECRYL® 5848 is an epoxidized soya oil acrylate based in part on renewable resources. EBECRYL® 5848 provides improved flow, levelling and pigment wetting in ultraviolet light (UV) or electron beam (EB) energy curable inks and coatings. Adhesion and flexibility are often enhanced when EBECRYL® 5848 is used as a modifier in inks and clear or pigmented coatings on paper and metal.
EBECRYL® 5849
EBECRYL® 5849 is a high performing medium viscosity biobased aliphatic diacrylate. EBECRYL® 5849 has very high reactivity and provides good hardness/scratch resistance to UV/EB cured films.
EBECRYL® 600
Ebecryl® 600 is the diacrylate ester of bisphenol A epoxy resin. This product is characterized by its light colour and fast cure response. Ebecryl® 600 finds broad use in UV/EB applications, such as inks, coatings and overprint varnishes.
EBECRYL® 600/50 TM
EBECRYL® 600-50 TM is a bisphenol A epoxy diacrylate diluted with 50% of trimethylolpropane triacrylate (TMPTA) monomer. EBECRYL® 600/50 TM is characterized by its light colour, low odour and fast cure response. Films of EBECRYL® 600/50 TM cured by ultraviolet light (UV) or electron beam (EB) exhibit high gloss, high surface hardness and the good solvent resistance typical of an epoxyresin.
EBECRYL® 600/50OT
EBECRYL® 600/50OT is the diacrylate ester of bisphenol A epoxy resin diluted with 50% of oligotriacrylate (OTA 480). This resin is characterized by its low odour, light colour, low irritancy and fast cure response. Films of EBECRYL® 600/50OT cured by exposure to ultraviolet light (UV) and electron beam (EB) exhibit high surface hardness and gloss, low residual odour and the excellent solvent resistance typical of epoxy resins.
EBECRYL® 6008/30 CBO
EBECRYL® 6008/30 CBO is a biobased modified diacrylate ester of bisphenol A epoxy resin. Product has been reviewed against IKEA “Renewable and recycled raw material guide for coatings, coverings and furniture glues for wood, wood based and wood like natural materials” (no. 1 Version 4, date: 2023-08-21) with confirmed biobased content to be ~20%. For this biobased content feedstocks and its origins are known and meets the requirements of above-mentioned guideline. This product is characterized by light color, fast cure and improved pigment wetting. Films of EBECRYL® 6008/30 CBO cured by ultraviolet light (UV) or electron beam (EB) exhibit high gloss and surface hardness with the excellent solvent resistance typical of an epoxy resin. EBECRYL® 6008/30 CBO finds broad usage in UV/EB applications, such as coatings, inks and overprint varnishes.
EBECRYL® 6008/30 CBO BC
EBECRYL® 6008/30 is a biobased modified diacrylate ester of bisphenol A epoxy resin containing ~25.9% of biocarbon. This product is characterized by light color, fast cure and improved pigment wetting. Films of EBECRYL® 6008/30 cured by ultraviolet light (UV) or electron beam (EB) exhibit high gloss and surface hardness with the excellent solvent resistance typical of an epoxy resin. EBECRYL® 6008/30 finds broad usage in UV/EB applications, such as coatings, inks and overprint varnishes.
EBECRYL® 6008/48 CBO
EBECRYL® 6008/48 is a biobased modified diacrylate ester of bisphenol A epoxy resin containing ~18% of biocarbon. This product is characterized by light color, fast cure and improved pigment wetting. Films of EBECRYL® 6008/48 cured by ultraviolet light (UV) or electron beam (EB) exhibit high gloss and surface hardness with the excellent solvent resistance typical of an epoxy resin. EBECRYL® 6008/48 finds broad usage in UV/EB applications, such as coatings, inks and overprint varnishes.
EBECRYL® 6008/48 CBO BC
EBECRYL® 6008/48 is a biobased modified diacrylate ester of bisphenol A epoxy resin containing ~18% of biocarbon. This product is characterized by light color, fast cure and improved pigment wetting. Films of EBECRYL® 6008/48 cured by ultraviolet light (UV) or electron beam (EB) exhibit high gloss and surface hardness with the excellent solvent resistance typical of an epoxy resin. EBECRYL® 6008/48 finds broad usage in UV/EB applications, such as coatings, inks and overprint varnishes.
EBECRYL® 6040
EBECRYL® 6040 is a modified diacrylate ester of bisphenol A epoxy resin. It is characterized by its low odour, light colour, low irritancy and fast cure response. Films of EBECRYL® 6040 cured by ultraviolet light (UV) or electron beam (EB) exhibit high surface hardness, high gloss, low residual odour and the excellent solvent resistance typical of epoxyresins. It is particularly useful in overprint varnishes.
EBECRYL® 605
EBECRYL® 605 is a bisphenol A epoxy diacrylate oligomer diluted with 25% of tripropyleneglycol diacrylate monomer. Films of Ebecryl® 605 cured by UV or EB exhibit high gloss, high surface hardness and the good solvent resistance typical of an epoxy resin.
EBECRYL® 605/20
EBECRYL® 605/20 is the bisphenol A epoxy diacrylate, EBECRYL® 600, diluted 20% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA)(1) to provide a lower viscosity, easier handling product. EBECRYL® 605/20 exhibits light color and fast cure response. Films of EBECRYL® 605/20 cured via ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, surface hardness, and the superior chemical resistance typical of an epoxy resin.
EBECRYL® 6061
EBECRYL® 6061 is biobased bisphenol A epoxy acrylate resin diluted in 45 % TMPEOTA. This product is characterized by its light colour, fast cure response and improved pigment wetting. Films of EBECRYL® 6061 cured by ultraviolet light (UV) or electron beam (EB) exhibit high surface hardness and gloss and the excellent solvent resistance typical of an epoxy resin. EBECRYL® 6061 finds broad use in UV/EB applications, such as inks, coatings and overprint varnishes.
EBECRYL® 641
EBECRYL® 641 is an amino modified epoxy acrylate with high flexibility and high reactivity. EBECRYL® 641 is especially recommended to produce UV flexo and screen inks with good flow, high gloss and high reactivity. When used in overprint varnishes, the flexibility and the adhesion to difficult substrates including oxidative off-set prints will be improved.
EBECRYL® 645
EBECRYL® 645 is a modified diacrylate ester of bisphenol A expoxy resin diluted with 25% of tripropyleneglycol diacrylate (TPGDA) monomer. It is recommended for use in: overprint varnishes, coatings for paper, paperboard, wood, chipboard and rigid plastics, paper upgrading, fast cure response, laminating adhesives, and wood sealers and top coats.
EBECRYL® 648
EBECRYL® 648 is a clear liquid modified diacrylate ester of bisphenol A epoxy resin diluted with 25% of trimethylolpropane triacrylate. Films of it cured by UV or EB exhibit high surface hardness, gloss and the excellent solvent resistance typical of an epoxy resin. It finds broad use in UV/EB applications, such as inks, coatings and overprint varnishes.
EBECRYL® 657
EBECRYL® 657 is a polyester tetraacrylate developed specifically for ultraviolet light (UV) and electron beam (EB) cured lithographic ink formulations. It provides the proper hydrophilic-lipophilic balance necessary for lithography, good pigment wetting, and low misting. It can be blended with epoxy acrylates or EBECRYL® 436 or EBECRYL® 438 to increase cure speed. EBECRYL® 657 is recommended for: lithographic inks and varnishes, coatings on paper, metal, and plastic, and pigment grinding vehicles.
EBECRYL® 7100
EBECRYL® 7100 is an acrylate functional oligomeric amine resin generally used as an additive or diluent for more viscous oligomers. When used in formulations with a photoabstraction type photoinitiator (e.g. benzophenone), EBECRYL® 7100 has an accelerating effect on the UV cure speed. It is recommended for: coatings for paper and plastics, overprint varnishes, screen inks, and wood topcoats.
EBECRYL® 7201
EBECRYL® 7201 is an acrylated amine primarily used as a hydrogen donor or photoactivator in ultraviolet (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. benzophenone), EBECRYL® 7201 has an accelerating effect on the UV cure speed.
EBECRYL® 740/40 TP
EBECRYL® 740/40 TP is an acrylic oligomer diluted with 40% tripropyleneglycol diacrylate (TPGDA). This resin is designed to provide improved adhesion to difficult substrates. It is recommended for use in: silk screen inks and coatings on plastics, adhesives and inks for difficult substrates, such as untreated polyester, polypropylene, polystyrene, and adhesion promoting adhesives.
EBECRYL® 741
EBECRYL® 741 is an adhesion promoting resin with excellent pigment dispersion properties for radiation curable screen inks.
EBECRYL® 745
EBECRYL® 745 is an acrylic polymer diluted 46% by weight with a 1/1 ratio of the reactive diluents 1,6-hexanediol diacrylate (HDODA) and tripropylene glycol diacrylate (TRPGDA). It is used as the primary or modifying oligomer in ultraviolet light (UV) or electron beam (EB) curable formulations to increase adhesion on difficult substrates. EBECRYL® 745 is recommended for: silk screen inks, coatings on plastics, and adhesives and inks for difficult substrates, such as untreated polyester, polypropylene, polystyrene, etc.
EBECRYL® 767
EBECRYL® 767 is an acid functionalized acrylic resin diluted with 38% of isobornyl acrylate (IBOA)(1) monomer. This light coloured, moderate viscosity resin is designed as an adhesion promoting additive and it can also be used as a primer or top coat.
EBECRYL® 780
EBECRYL® 780 is a highly functional, carboxylic acid containing methacrylate oligomer diluted in 2-methoxy-1-propanol solvent. EBECRYL® 780 exhibits good cure speed, good gloss characteristics, low shrinkage and good adhesion to metal. It is especially suitable for use in the topcoat of vacuum metallized cosmetic and filmic applications.
EBECRYL® 80
EBECRYL® 80 is a low viscous amine modified multifunctional acrylated polyether oligomer generally used as main oligomer in a clear overprint varnish. It has been developed specially for applications where high gloss and fast cure by radiation are desired together with a good solvent resistance and low residual odour. It is recommended for use in: clear coatings on paper, wood, plastics, top coats for wood, screen inks and coatings, wood fillers, and high gloss coatings.
EBECRYL® 800
EBECRYL® 800 is a polyester acrylate. When cured by ultraviolet light (UV) or electron beam (EB), films of EBECRYL® 800 exhibit good abrasion resistance, solvent resistance and hardness. This resin was developed for coatings on wood and paper.
EBECRYL® 81
EBECRYL® 81 is an amine modified polyester acrylate that exhibits very low viscosity and fast cure via exposure to ultraviolet light (UV). Films of EBECRYL® 81 cured by UV or electron beam (EB) demonstrate high gloss and low residual odor. It is especially suited to applications requiring low viscosity and fast UV cure, including overprint varnishes and flexographic inks.
EBECRYL® 810
EBECRYL® 810 is a polyester tetraacrylate that exhibits low viscosity and good cure response. Films cured by UV or EB demonstrate surface hardness, chemical resistance and generally good adhesion. It is particularly suited to application methods requiring low viscosity such as solventless spray and vacuum coating. It is recommended for: coatings for paper, wood and plastics, paper upgrading, vacuum applied coatings, flexographic inks, EB cure paper-foil laminating adhesives, and solventless spray and flow coater applications.
EBECRYL® 811
EBECRYL® 811 is a UV or EB curable polyester acrylate for either wet or dry offset printing on plastic substrates. Inks made using Ebecryl® 811 obtain excellent adhesion to calendered vinyl, polystyrene, polyolefins, and PVC.
EBECRYL® 812
EBECRYL® 812 is an ultraviolet light (UV) or electron beam (EB) curable polyester acrylate. Its low viscosity and outstanding color development properties make this product ideal for high pigment content, low viscosity flexo inks. Inks made using this vehicle have excellent adhesion to a variety of substrates common to flexo printing.
EBECRYL® 820
EBECRYL® 820 is a low viscosity polyester acrylate oligomer, with exceptional pigment wetting properties. This combined with the low viscosity of this material makes it ideal as a pigment grinding resin. EBECRYL® 820 also gives a fast cure response when formulated with other oligomers and cured via ultraviolet light (UV) or electron beam (EB).
EBECRYL® 8209
EBECRYL® 8209 is a Sn-free aliphatic urethane acrylate oligomer which provides extremely fast cure response when exposed to ultraviolet (UV) light or electron beam (EB). Cured films of EBECRYL® 8209 exhibit high hardness, abrasion and solvent resistance.
EBECRYL® 8210
EBECRYL® 8210 is an aliphatic urethane acrylate that exhibits low viscosity and high reactivity in ultraviolet (UV) light or electron beam (EB) curable coatings. Cured films of EBECRYL® 8210 demonstrate high hardness with good scratch, abrasion and chemical resistance. EBECRYL® 8210 is recommended for: coatings requiring high scratch/abrasion resistance and improved adhesion, a modifying oligomer to increase cure speed, solvent resistance and abrasion resistance, and dual cure coating systems.
EBECRYL® 8213
EBECRYL® 8213 is an aliphatic urethane acrylate with 70% solid content diluted in butyl acetate. EBECRYL® 8213 exhibits good yellowing resistance and very good outdoor resistance. Furthermore this resin provides very good adhesion onto aluminium-based vacuum metallization layer and most metallic basecoats for plastic coating.
EBECRYL® 8232
EBECRYL® 8232 is a difunctional aromatic urethane acrylate. Films of EBECRYL® 8232 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, excellent grit feeder abrasion resistance, good adhesion to various substrates in combination with a good solvent resistance. This EBECRYL® 8232 is recommended as sealer for parquet floor applications.
EBECRYL® 824
EBECRYL® 824 is a acrylate functional resin designed for UV/EB laminating adhesives that require low migration and low residual odor. It is suitable to both film/film and film/paper lamination. It is characterized by its low viscosity and good adhesion properties to many common plastic film substrates.
EBECRYL® 8296
EBECRYL® 8296 is an undiluted aliphatic urethane acrylate oligomer developed for energy curable systems. It can contribute to unique performance in formulations for haptic coatings. It is recommended for use in: flexible coatings, haptic coating on plastics and films, and in mold decoration.
ACURE® 510-170
ACURE® 510-170 is a malonate functional polyester resin with succinimide.
ACURE™ 510-174
ACURE™ 510-174 is a malonate functional polyester resin with a CH equivalent weight of 119 g/eq (calculated on as-supplied product), for use as a donor resin in ACURE systems. Contains 1.5 +/- 0.05 % succinimide, calculated on solid binder.
ACURE™ 510-176
ACURE™ 510-176 is a malonate functional polyester resin with a CH equivalent weight of xxx g/eq (calculated on as-supplied product), for use as a donor resin in ACURE systems. Contains 1.5 +/- 0.05 % succinimide, calculated on solid binder.\r\n
ACURE® 510-200
ACURE® 510-200 is a malonate functional polyester resin with a CH equivalent weight of 170 g/Eq (calculated on as-supplied product) for use as a donor resin in ACURE systems.
ACURE® 510-270
ACURE® 510-270 is a malonate functional polyester resin with a CH equivalent weight of 170 g/eq (calculated on as-supplied product), for use as a donor resin in ACURE systems. Contains 1.5 +/- 0.05 % succinimide.
ACURE™ 510-375
ACURE™ 510-375 is a modified malonate-functional high flow polyester resin, which functions as a donor resin in ACURE™, non-isocyanate, coatings systems. ACURE™ topcoats based on ACURE™ 510-375 feature excellent hardness development coupled with excellent outdoor durability, high crosslink densities and outstanding chemical resistance. ACURE™ 510-375 contains 1.5% succinimide, a kinetic additive, which increases pot-life and open time.
ACURE® 550-105
ACURE® 550-105 is an ACURE certified ditrimethylolpropane tetraacrylate.
EBECRYL® 830
Ebecryl® 830 is a 100% solids hexafunctional polyester acrylate oligomer. When cured by ultraviolet light or electron beam, films of Ebecryl® 830 exhibit high abrasion resistance, solvent resistance and hardness. This resin was developed for coatings and inks on wood, paper and plastics.
EBECRYL® 8301-R
EBECRYL® 8301-R is a hexafunctional aliphatic urethane acrylate that provides extremely fast cure response when exposed to ultraviolet light (UV) or electron beam (EB). Cured films of EBECRYL® 8301-R exhibit high hardness, scratch and chemical resistance, and are resistant to yellowing. It is recommended for: scratch resistant coatings on plastic, wood coatings and fillers, and a modifying oligomer to improve cure speed, solvent resistance, and gloss of a wide variety of coatings and inks.
EBECRYL® 8311
EBECRYL® 8311 is an aliphatic urethane acrylate nanocomposite that exhibits low viscosity and high reactivity in ultraviolet (UV) light or electron beam (EB) curable coatings. Films of EBECRYL® 8311 exhibit good weatherability, outstanding hardness, chemical, and scratch and abrasion resistance coupled with very low haze development after abrasion.
EBECRYL® 8314
EBECRYL® 8314 an aliphatic urethane tetraacrylate diluted in IBOA & HPMA. After ultraviolet light (UV) or electronic beam (EB) curing, it exhibits an outstanding toughness & resiliency, and abrasion resistance coupled with outstanding exterior durability properties. It is particularly suitable for paint protection & automotive interior films, and small to medium draws thermoforming after cure.
EBECRYL® 8315
EBECRYL® 8315 an aliphatic urethane tetraacrylate diluted in HPMA. After ultraviolet light (UV) or electronic beam (EB) curing, it exhibits an outstanding toughness & resiliency, and abrasion resistance coupled with outstanding exterior durability properties. It has self-healing properties of minor scratches. It is particularly suitable for paint protection & automotive interior films, and medium draws thermoforming after cure.
EBECRYL® 837
EBECRYL® 837 is a 100% solids multifunctional polyester acrylate oligomer. It is particularly useful in UV (ultraviolet) and EB (electron beam) curable inks and coatings where improved cure response, hardness and scratch/abrasion resistance are required.
EBECRYL® 8402
EBECRYL® 8402 is a low viscosity aliphatic urethane diacrylate. Films cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, toughness and excellent exterior durability. Low viscosity coatings or enhanced performance via increased oligomer content are possible. It is recommended for use in: coatings for wood, coatings for plastics, flexographic inks, screen inks, inkjet inks and exterior durable coatings.
EBECRYL® 8405
EBECRYL® 8405 is an aliphatic urethane tetraacrylate diluted 20% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDODA). Films of EBECRYL® 8405 cured by ultraviolet light (UV) or electron beam (EB) combine abrasion resistance, flexibility, and adhesion with excellent exterior durability and resistance to yellowing.
EBECRYL® 8411
EBECRYL® 8411 is an aliphatic urethane diacrylate diluted 20% by weight with the reactive diluent isobornyl acrylate (IBOA). Films of EBECRYL® 8411 cured by ultraviolet light (UV) or electron beam (EB) exhibit exceptional extensibility and flexibility, in addition to excellent abrasion resistance, good adhesion, exterior durability and resistance to yellowing. It is recommended for use in: screen inks for plastics, screen inks for lamination, thermoformable screen inks, coatings for metal, wood, paper and plastics, and coatings requiring exterior durability.
EBECRYL® 8413
EBECRYL® 8413 is designed as the pigment grind oligomer, for UV thermoformable ink applications, and should be used in conjunction with the letdown oligomer, EBECRYL® 1300. When used together with EBECRYL® 1300, non-blocking thermoformable inks can be developed. These thermoformable inks demonstrate scratch and temperature resistance, as well as excellent adhesion to a variety of plastic substrates without the necessity of corona discharge or flame pretreatment.\n\nFormulated products containing EBECRYL 8413 may be applied via flat bed screen methods and are recommended for use in: displays / signage / POP, vending machine panels, packaging, sporting goods, architectural, electronics, appliance nameplates, housing, toys, and novelty items. EBECRYL® 8413 is also suitable for elastomers application by 3D printing offering great shape recovery.
EBECRYL® 8465
EBECRYL® 8465 is a clear liquid undiluted aliphatic urethane triacrylate oligomer. Films of EBECRYL 8465 cured by UV or EB exhibit excellent exterior durability, toughness and good flexibility, as well as the non-yellowing properties typical of an aliphatic urethane. It is recommended for use in coatings for wood and plastics requiring excellent exterior durability.
EBECRYL® 85
EBECRYL® 85 is a low viscosity amine modified polyether acrylate that provides high reactivity in low extractable, low odor energy curable coatings and inks. Coatings and inks based on EBECRYL® 85 exhibit a low odor after UV or EB curing.
EBECRYL® 853
Ebecryl® 853 is a trifunctional low viscous diluting acrylate giving low odour after UV or EB curing and low extractables It is compatible with a wide range of acrylated resins Ebecryl® 853 was designed to produce low irritant formulations and contains less than 0.1 % TMPTA.
EBECRYL® 854
EBECRYL® 854 is an undiluted polyester acrylate resin. Films of EBECRYL® 854 cured by ultraviolet light (UV) or electron beam (EB) exhibits excellent adhesion, high toughness and good abrasion resistance. This product is recommended for parquet floor and furniture applications.
EBECRYL® 857
EBECRYL® 857 is a versatile medium viscosity, hybrid polyester acrylate developed for flooring and furniture applications. It can be applied by direct or reverse roller coater, and exhibits good performances for furniture and flooring applications.
EBECRYL® 8602
EBECRYL® 8602 is a nine functional aliphatic urethane acrylate. After polymerization, films of EBECRYL® 8602 exhibit significant improvement in weatherability compared to hexafunctional aliphatic urethane acrylate without compromising scratch and abrasion resistance. In addition, EBECRYL® 8602 does not contain intentionally added organic tin compounds, heavy metals* or quinones.
EBECRYL® 8606
EBECRYL® 8606 is an aliphatic urethane tetraacrylate. After ultraviolet light (UV) or electronic beam (EB) curing, it exhibits a unique combination of hardness, toughness, flexibility and abrasion resistance coupled with outstanding exterior durability properties. It maintain excellent gloss retention after chemical tests. It is particularly suitable for paint protection & automotive interior films, and small draws thermoforming after cure.
EBECRYL® 870
EBECRYL® 870 is a fatty acid modified polyester hexaacrylate. Because of the special structure of the backbone and the high acrylic functionality, EBECRYL® 870 provides the proper hydrophilic-lipophilic balance necessary for lithography, and high reactivity when cured by ultraviolet light (UV) or an electron beam (EB). It is recommended for: fast curing lithographic inks and clear varnishes, and improving lithographic behavior as an additive.
EBECRYL® 8701
EBECRYL® 8701 is an aliphatic urethane triacrylate designed to bridge the gap between high surface hardness and excellent outdoor durability. EBECRYL 8701 can be used in applications requiring a combination of hardness, increased Tg, chemical resistance, and outdoor durability. Films of EBECRYL 8701 cured by ultraviolet light (UV) or electron beam (EB) exhibit a unique combination of surface hardness and outdoor durability typically not found in one molecule.
EBECRYL® 8702
EBECRYL® 8702 is an aliphatic urethane hexaacrylate that offers a multitude of performance properties allowing the formulator the flexibilty to meet requirements. Films using EBECRYL® 8702 cured by ultraviolet light (UV) or electron beam (EB) exhibit a combination of hardness, abrasion and impact resistance coupled with good exterior durability. It is recommended for use in: automotive OEM or refinish, coatings for wood, plastic coatings, screen inks, light stable coatings, and metal coatings.
EBECRYL® 872
EBECRYL® 872 is polyester acrylate resin. Films of EBECRYL® 872 cured by ultraviolet light (UV) or electron beam (EB) exhibits excellent adhesion, high toughness and flexibility. EBECRYL® 872 is recommended for sealers for parquet floor and furniture applications.
EBECRYL® 88
EBECRYL® 88 is an amine modified polyether acrylate that exhibits low viscosity and fast cure via exposure to ultraviolet light (UV). Films of EBECRYL® 88 cured by UV or electron beam (EB) demonstrate high gloss, solvent resistance and low residual odor. EBECRYL® 88 is especially suited to applications requiring low viscosity and fast UV cure, including overprint varnishes and flexographic inks.
EBECRYL® 880
EBECRYL® 880 is a clear liquid low viscous amine modified multifunctional acrylated polyether oligomer generally used as main oligomer in low viscous clear formulations. It has been developed specially for applications where high gloss, fast cure response and a low viscosity (spray) by radiation are desired. It is recommended for use in: clear coatings on paper, wood, plastics, top coats for wood, high gloss coatings, and flexo inks and varnishes.
EBECRYL® 8804/10 EA
EBECRYL 8804-10EA is the aliphatic urethane diacrylate EBECRYL 8804 blended with 10% by weight ethyl acetate for reduced viscosity. Films of EBECRYL 8804 cured by ultraviolet light (UV) or electron beam (EB) exhibit excellent abrasion resistance, toughness and flexibility, and are resistant to yellowing.
EBECRYL® 8808
EBECRYL® 8808 is an undiluted aliphatic urethane diacrylate. Since the oligomer is undiluted, more formulating latitude is possible. Films of EBECRYL® 8808 cured by ultraviolet light (UV) or electron beam (EB) exhibit excellent exterior durability, toughness, and resistance to yellowing. It is recommended for use in: screen inks and coatings on various substrates, non-yellowing, exterior durable coatings, and coatings for wood and plastics.
EBECRYL® 8809
EBECRYL® 8809 is a difunctional aliphatic urethane acrylate that does not contain any intentionally added organic tin compounds, heavy metals*, hydroquinone (HQ) or methyl ether of hydroquinone (MEHQ). Films of EBECRYL® 8809 cured by ultraviolet light (UV) or electron beam (EB) exhibit excellent exterior durability, toughness, and resistance to yellowing.
EBECRYL® 8810
EBECRYL® 8810 is a difunctional aliphatic urethane acrylate that does not contain any intentionally added organic tin compounds, heavy metals*, hydroquinone (HQ) or methyl ether of hydroquinone (MEHQ). (Please note that quinones are present in many raw materials, so the overall quinone content is reduced, but not zero in EBECRYL® 8810.) EBECRYL® 8810 is a high viscosity liquid at room temperature and is light in color. Films of EBECRYL® 8810 cured by ultraviolet light (UV) or electron beam (EB) exhibit excellent abrasion resistance, toughness and flexibility, and are resistant to yellowing.
EBECRYL® 8811
EBECRYL® 8811 is a difunctional aliphatic urethane acrylate that does not contain any intentionally added organic tin compounds, heavy metals*, hydroquinone (HQ) or methyl ether of hydroquinone (MEHQ). (Please note that quinones are present in many raw materials, so the overall quinone content is reduced, but not zero in EBECRYL® 8811.) EBECRYL® 8811 exhibits rapid surface cure response in both low and high energy cure systems. It is especially recommended for use in UV LED and UVA curing in order to obtain good surface cure. Films of EBECRYL® 8811 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, toughness, abrasion resistance, and are resistant to yellowing.
EBECRYL® 884
EBECRYL® 884 is an undiluted polyesteracrylate resin. Films of EBECRYL® 884 cured by ultraviolet light (UV) or electron beam (EB) exhibits high flexibility and excellent abrasion resistance. It is recommended for use in: parquet floor applications, furniture coatings, plastic coatings, and resilient flooring.
EBECRYL® 888
EBECRYL® 888 is a low viscosity polyester acrylate designed for use in UV/EB primer coatings to provide ink receptivity and prevent plasticizer migration. Films containing EBECRYL 888 which are cured by ultraviolet light (UV) or electron beam (EB) exhibit good adhesion, good abrasion and high flexibility. EBECRYL 888 is recommended for use in flexographic or gravure primer coatings printed on polyester, plasticized PVC and uncoated films.
EBECRYL® 8894
EBECRYL® 8894 is an aliphatic urethane acrylate, diluted in butyl acetate, designed for applications requiring high humidity and abrasion resistance. Films of EBECRYL®8894 cured via exposure to ultraviolet light (UV) or electron beam (EB) exhibit excellent exterior durability, good toughness and flexibility, as well as the non-yellowing properties typical of an aliphatic urethane.
EBECRYL® 8896
EBECRYL® 8896 is a revolutionary aliphatic urethane acrylate designed for application(s) requiring haptic properties (e.g. “soft touch/feel”). Films of EBECRYL®8896 cured via exposure to ultraviolet light (UV) or electron beam (EB) are tough, flexible, and resistant to yellowing. EBECRYL®8896 is compatible with variety of fillers, pigments, waxes, and polymeric beads allowing formulator maximum formulating latitude to create a number of haptic properties ranging from a velvety/silky feel to EBECRYL®8896’s intrinsic rubbery feel.
EBECRYL® 89
EBECRYL® 89 is an acrylated amine primarily used as a hydrogen donor, or photo activator, in ultraviolet light (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. benzophenone), EBECRYL® 89 provides rapid UV cure response in air by mitigating the effects of oxygen inhibition at the coating or ink surface. Unlike conventional tertiary amines such as N-methyldiethanolamine, EBECRYL® 89 reacts to become part of the UV cured polymer, resulting in lower residual odor.
EBECRYL® 892
EBECRYL® 892 is a light colour, low viscosity tetra-functional acrylated oligomer. It also improves the hardness and solvent resistance of cured inks and coatings. EBECRYL® 892 is particularly useful for lithographic offset inks, flexo inks and overprint varnishes.
EBECRYL® 893
EBECRYL® 893 is a modified polyester acrylate specifically developed for UV curable field applied concrete and vinyl composition tile (VCT) floor coatings. The low viscosity of EBECRYL® 893 also provides latitude to achieve low viscosity formulations, which are required for field applied applications. It is recommended for use in UV curable field applied concrete and VCT coatings.
EBECRYL® 895
Ebecryl® 895 is a multifunctional monomer which polymerizes when exposed to sources of free radicals. It is composed primarily of the pentaacrylate and hexaacrylate esters of dipentaerythritol. Ebecryl® 895 is particularly useful in UV (ultraviolet) and EB (electron beam) curable inks and coatings where improved cure response, hardness and scratch/abrasion resistance are required.
EBECRYL® 896
EBECRYL® 896 is a multifunctional monomer which polymerizes when exposed to sources of free radicals. It is a low viscosity DPHA composed primarily of pentaacrylate and hexaacrylate esters of dipentaerythritol. It is particularly useful in UV/EB inks and coatings where improved cure response, hardness and scratch/abrasion resistance are required.
EBECRYL® 898
EBECRYL® 898 is a special purpose, 100% solids tetra functional polyester acrylate that extends the matting effect of a silica containing formulation. It is characterized by extended matting effect, low viscosity, low odour, and fast cure. This product is recommended for wood and plastic coatings, paper upgrading, flexographic inks, and EB cured paper-foil coatings.
EBECRYL® IBOA
EBECRYL® IBOA, Isobornyl acrylate, is a high purity, low colour monofunctional diluent monomer which polymerizes when exposed to sources of free radicals. It is a diluent compatible with a wide range of acrylated oligomers used in UV/EB curing applications. Good viscosity reduction and low shrinkage properties make this product useful in a variety of overprint varnishes, inks, and coatings.
EBECRYL® IBOMA
EBECRYL® IBOMA (isobornyl methacrylate) is a mono-functional monomer which polymerizes when exposed to sources of free radicals. EBECRYL® IBOMA forms homopolymers and copolymers. EBECRYL® IBOMA is compatible with a wide range of acrylated- and methacrylated resins.
EBECRYL® LED 02
EBECRYL® LED 02, a mercapto modified polyester acrylate resin, can be added as a co-resin to UV curable formulations. EBECRYL® LED 02 transforms formulations into UV LED, UVA, or low energy curable systems by providing better surface cure. In addition, this co-resin can also be used to obtain better surface cure in high energy cure formulations. EBECRYL® LED 02 provides better surface cure by mitigating oxygen inhibition of the free radical process.
EBECRYL® LED 03
EBECRYL® LED 03 is a low viscosity amine modified polyether acrylate oligomer that can be added as a co-resin to UV curable formulations. EBECRYL® LED 03 – when combined with an appropriate photoinitiator system – transforms formulations into UV LED, UVA, or low energy curable systems by providing improved surface cure. In addition, this effect is also seen in high energy cure formulations. The improved surface cure is obtained by mitigating oxygen inhibition of the free radical process and/or by being an amine synergist for Norrish type II photoinitiators.
EBECRYL® LED 04
EBECRYL® LED 04 is an acrylated polyamine that can be added as a co-resin to UV curable formulations. EBECRYL® LED 04 – when combined with an appropriate photo initiator system – transforms formulations into UV LED, UVA, or low energy curable systems by providing improved surface cure. In addition, this effect is also seen in high energy cure formulations. The improved surface cure is obtained by mitigating oxygen inhibition of the free radical process and/or by being an amine synergist for Norrish type II photo initiators. Coating and inks based on EBECRYL® LED 04 exhibit a low odor after UV or EB curing. Due to its hydrophobic nature EBECRYL® LED 04 can also be used in offset inks applications as a replacement of aminobenzoate synergists.
EBECRYL® LED 05
EBECRYL® LED 05 is an acrylated polyamine that can be added as a co-resin to UV curable formulations.
EBECRYL® LEO 10101
EBECRYL® LEO 10101 is a self-curing multifunctional acrylate enabling the UV curing of printing inks and coatings, not requiring additional. It is specifically developed for making high reactive nicely flowing Flexo inks. This product can be used for different colours, also for white. It is recommended to use 20-30% EBECRYL® LEO 10101 in an ink or coating to reach a correct surface and through cure.
EBECRYL® LEO 10103
EBECRYL® LEO 10103 is a multifunctional acrylate that in the presence of an amine synergist can enable the UV curing of printing inks and coatings without, or with only a minimal amount, of photoinitiator. The elimination or reduction of photoinitiator decreases the potential for migration in indirect food contact applications. EBECRYL® LEO 10103 can be used for low migration over print varnishes along with flexographic and offset inks in the entire colour range, including white. EBECRYL® LEO 10103 at 10-20% by weight in a coating or ink can provide a good balance of surface and through cure.
EBECRYL® LEO 10501
EBECRYL® LEO 10501 is a trifunctional diluting oligomer that provides low extractables, low odor and low migration after UV or EB curing. It is compatible with a wide range of acrylated resins. It can be used to produce low odor and low migrating UV overprint varnishes (OPV’s) and inks for indirect food contact applications. EBECRYL® LEO 10501 is specially recommended to formulate low extractable and low odor UV/EB curable OPV’s and inks for flexography, lithography and screen applications.
EBECRYL® LEO 10502
EBECRYL® LEO 10502 is a low viscosity polymeric tetrafunctional polyether acrylate that provides low extractables, low odor and low migration after UV or EB curing. It is recommended for use in low odor and low migrating UV/EB curable overprint varnishes (OPV’s) and inks.
EBECRYL® LEO 10551
EBECRYL® LEO 10551 is a low viscosity amine modified polyether acrylate oligomer that provides low extractables, low odor and low migration after UV or EB curing. It is recommended for use in low odor and low migrating UV overprint varnishes (OPV’s) and inks for indirect food packaging applications.
EBECRYL® LEO 10552
EBECRYL® LEO 10552 is a low viscosity amine modified polyether acrylate oligomer that provides low extractables, low odor and low migration after UV or EB curing. It is recommended for use in low odor and low migrating UV overprint varnishes (OPV’s) and inks for indirect food packaging applications.
EBECRYL® LEO 10553
EBECRYL® LEO 10553 is a low viscosity polymeric amine modified polyether acrylate that provides low extractables, low odor and low migration and after UV or EB curing. It is recommended for use in low odor and low migrating UV overprint varnishes (OPV’s) and inks for indirect food packaging applications.
EBECRYL® LEO 10601
EBECRYL® LEO 10601 is a modified epoxy acrylate that provides low extractables and low odor after UV or EB curing. It exhibits good pigment wetting properties and produces UV offset inks exhibiting enhanced ink- water balance and low misting. It may also be used to produce UV flexo inks with good flow, high gloss and high reactivity. It is also suitable for screen and gravure
EBECRYL® LEO 10801
EBECRYL® LEO 10801 is a hexafunctional polyester acrylate oligomer that provides high reactivity and the proper ink-water balance necessary for good lithographic printing. Lithographic inks based on EBECRYL® LEO 10801 display excellent rheological properties ensuring good ink transfer from the printing plate to the blanket and then to the substrate, combined with good dot definition. It is recommended for use in: lithographic and flexographic inks, offset OPV, and inks and coatings for indirect food packaging and related applications.
EBECRYL® MPDDA
EBECRYL® MPDDA is a difunctional monomer which polymerizes when exposed to sources of free radicals. This difunctional acrylated monomer is particularly useful in inks and coatings where improved elasticity, weathering and adhesion are desired in combination with an excellent water resistance.
EBECRYL® P115
EBECRYL® P115 is a copolymerizable amine used as a hydrogen donor, or photoactivator, in ultraviolet light (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. ADDITOL® BP), EBECRYL® P115 provides rapid UV cure response in air by mitigating the effects of oxygen inhibition at the coating or ink surface. It has recommended levels are from 5 to 15% based on the total formulation, usually combined with 3-5% photosensitizer.
EBECRYL® P116
EBECRYL® P 116 is a reactive amine additive used in place of more volatile amine synergists to increase the cure speed of ultraviolet (UV) cured coatings. When EBECRYL® P 116 is used in combination with other photoinitiators an increase in cure speed, especially at the surface, can be realized. It is recommended for use in: overprint varnishes, wood fillers and top coats, and clear coatings on paper and plastics.
EBECRYL® TMPTMA
EBECRYL® TMPTMA, CAS No. 3290-92-4, is a trifunctional monomer which polymerizes when exposed to sources of free radicals. EBECRYL® TMPTMA forms homopolymers and copolymers. EBECRYL® TMPTMA is compatible with a wide range of acrylated- and methacrylated resins.
ADDITOL® CPK
ADDITOL® CPK is a radical photoinitiator that can be used alone or in combination with other photoinitiators. It is used in formulations containing unsaturated materials such as acrylates, methacrylates, vinyls and unsaturated polyesters. With exposure to UV light, ADDITOL® CPK undergoes a photochemical reaction that generates radicals. These radicals will initiate polymerization through the unsaturated groups present in the system.
ADDITOL® E 04707 SPEC
ADDITOL® E 04707 SPEC additive is a semi-crystalline poly-ester resin to be used as additive acting as polymeric flexibilizer for formulations based on superdurable polyurethanes. ADDITOL® E 04707 SPEC provides a higher degree of flexibility and mechanical resistance of coatings.
ADDITOL® P 791
ADDITOL® P 791 XLINK additive is a solid aliphatic polyanhydride hardener for use with solid acrylic resins containing glycidyl groups to manufacture powder coatings. The binder ratio is dependent on the equivalent weight of the glycidyl functional resin employed.
ADDITOL® P 824 FLOW
ADDITOL® P 824 FLOW additive is a 15% active flow promoter masterbatch on an outdoor resistant hydroxylated polyester matrix that can be used in the manufacture of powder coatings. An addition of 3-5%, by weight to a powder coating formulation increases gloss and is compatible with nearly all powder coating systems.
ADDITOL® P 891 FLOW
ADDITOL® P 891 FLOW additive is a flow promoter masterbatch suitable for use in clear powder coatings. ADDITOL® P 891 contains approximately 5% active substance in an outdoor resistant carboxylated polyester matrix.The addition of 7-10% on binder is suggested for the manufacture of haze-free clear coatings with very good flow.
ADDITOL® P 896 FLOW
ADDITOL® P 896 FLOW additiveis a flow promoter master batch suitable for use in pigmented powder coatings. It contains approximately 15% active substance in an outdoor resistant hydroxylated polyester carrier. The addition of 3-5% by weight to a powder coating formulation is recommended to improve flow while maintaining good compatibility with nearly all powder coating systems.
ADDITOL® P 920 CAT
ADDITOL® P 920 CAT is a catalyst masterbatch designed for create wrinkle finishes. It contains 5% active substance in a hydroxylated polyester matrix. Coatings made using this masterbatch in conjunction with CRYLCOAT® 2920-0 and a glycoluril crosslinker produce a consistent wrinkle finish with good mechanical properties.
ADDITOL® P 932 XLINK
ADDITOL® P 932 XLINK is an aliphatic urethane pre-polymer crosslinking agent for use with hydroxyl terminated polyester resins for the manufacture of polyurethane powder coatings.
ADDITOL® P 950
ADDITOL® P 950 SPEC additive is a tribo active masterbatch for use in hybrid, TGIC, polyurethane and TGIC alternative systems. ADDITOL® P 950 SPEC contains 5% active substance that greatly enhances the charging ability of powder coatings sprayed with a tribo powder spray gun. It is easily handled, greatly improves the dispersion of the additive in powder coatings and is designed for indoor or outdoor use.
ADDITOL® P 963 CAT
ADDITOL® P 963 CAT is a catalyst masterbatch to be used in hybrid, TGIC or ARALDITE® PT-910 systems. ADDITOL® P 963 CAT contains 5 % active substance and has been designed for indoor and outdoor use. ADDITOL® P 963 CAT is easily handled and greatly improves dispersion of the catalyst in powder coating formulations.
ADDITOL® P 964 CAT
ADDITOL® P 964 CAT is a catalyst master batch designed for use in hybrid, TGIC or ARALDITE PT-910 systems. It contains 5% active substance and is designed for indoor or outdoor use. ADDITOL® P 964 is easily handled and greatly improves the dispersion of catalyst in powder coatings.
ADDITOL® P 965 XLINK
ADDITOL® P 965 XLINK additive is an aromatic urethane adduct crosslinking agent for hydroxylated polyester resins for the manufacture of polyurethane powder coatings.
ADDITOL® P 966 CAT
ADDITOL® P 966 CAT is a catalyst masterbatch for use in TGIC or ARALDITE® PT-910 systems. This resin contains 5% active ingredient in a superdurable polyester resin matrix. ADDITOL® P 966 CAT is easily handled and greatly improves dispersion of the catalyst in powder coating formulations when mixed with superdurable resins. This material can also be used with CRYLCOAT® 4420-0 and CRYLCOAT® 4430-0 at varying levels in dry-blend systems to achieve adjustable low gloss values.
ADDITOL® SXK 407 N CAT
ADDITOL® SXK 407 N CAT additive is a phosphoric acid derivate. It accelerates and promotes the curing of heat hardening coatings, e. g. those based on phenolic/epoxide resin combinations. The addition of ADDITOL® SXK 407 N CAT also results in improved adhesion\r\nand resistance against sulphur staining.
ADDITOL® VXK 6365 CAT
ADDITOL® VXK 6365 CAT catalyst increases the reactivity of polyisocyanates (blocked or not) with aqueous hydrofunctional binders. An enhanced reactivity of 2-pack isocyanate crosslinkable systems can negatively affect their storage stability. It is recommended to check compatibility and potlife.
ADDITOL® VXL 5918 SPEC
ADDITOL® VXL 5918 SPEC is a stabilizier for unsaturated polyester systems. Pot-Life extender.
ADDITOL® VXW 4926 XFOAM
ADDITOL® VXW 4926 XFOAM additive - anti foam/air release - is a defoamer/deaerater for water dilutable paints, without silicone addition. It has rapid defoaming or air release, and allows high film thickness of stoving paints, without cissing. It is also suited for combinations of dispersions with water dilutable synthetic resins.
ADDITOL® VXW 6200 DISP
ADDITOL® VXW 6200 DISP dispersant is a polymer anionic dispersing additive for gloss, silky-gloss and emulsion paints.
ADDITOL® VXW 6211 XFOAM
ADDITOL® VXW 6211 XFOAM additive - anti foam/air release - is a defoamer for emulsion paints, especially for adhesives, which meets the requirements of the Federal Health Administration.
ADDITOL® VXW 6235 XFOAM
ADDITOL® VXW 6235 XFOAM- anti foam/air release - is a foam retardant that is mainly recommended for powder coating materials to be used in aqueous systems such as: emulsion paints, 2-component epoxy systems, plasterwork, filling compounds and scalants, flooring compounds, and adhesives.
ADDITOL® VXW 6252
ADDITOL® VXW 6252 is a curing component for cathodic precipitable acrylate binders.
ADDITOL® VXW 6385
ADDITOL® VXW 6385 is a curing component for cathodic precipitable acrylate binders. It serves as a cross-linking component for acrylate binders for the production of dark colored as well as white or bright colored electro dipping paints by means of a tin catalysis.
ADDITOL® VXW 6396
ADDITOL® VXW 6396 is a flow and leveling agent for waterborne paint systems, without silicone addition. It's a fluorene modified acrylic resin copolymer, neutralized with amine, and improves leveling and substrate wetting.
ADDITOL® WT 101 DF-S
ADDITOL® WT 101 DF-S is a water and waste water treatment defoamer. Modified silicone defoamer emulsion (20% active). Emulsifier free technology.
ADDITOL® WT 102 DF-M
ADDITOL® WT 102 DF-M is a water and waste water treatment defoamer. Highly refined mineral oil / wax defoamer (100% active). Improved foam lamella penetration for highly effective macro foam destruction. For all WW treatment process stages.
ADDITOL® WT 103 DF-S
ADDITOL® WT 103 DF-S is a water and waste water treatment defoamer. Modified silicone / silica defoamer emulsion (25% active). Emulsifier free technology. For sophisticated & special treatments (zero liquid discharge plants, distillation & evaporation units, membrane reactors). Highly effective at low dosages.
ADDITOL® XL 109/50LG XSKIN
ADDITOL® XL 109/50LG XSKIN additive is a specific antioxidizing agent for oxidizing paint systems and inhibits or retards the crosslinking reactions initiated by air oxygen in the surface of paint films.
ADDITOL® XL 121 N FLOW
ADDITOL® XL 121 N FLOW additive is a paint additive to enhance mar resistance and levelling of air drying and stoving paints, particularly for silicone modified air drying and stoving alkyd resins.
ADDITOL® XL 122 FLOW
ADDITOL® XL 122 FLOW -flow/leveling/levelling- is a paint additive to enhance mar resistance and slip and to improve flow and levelling in air drying and stoving paints.
ADDITOL® XL 203 DISP
ADDITOL® XL 203 DISP additive -dispersants- is a silicone-containing cationic antifloating agent, wetting agent and dispersing agent.
ADDITOL® XL 204 DISP
ADDITOL® XL 204 DISP -dispersants- is a silicone containing anionic active antifloating, wetting and dispersing agent.
ADDITOL® XL 297 XSKIN
ADDITOL® XL 297 XSKIN additive is a special oxime combining maximum antiskin effect with minimum drying retardation.
ADDITOL® XL 481 FLOW
ADDITOL® XL 481 FLOW aditive is a cost effective flow modifier developed for use in a wide range of solvent-borne applications including coil coatings, industrial coatings and wood finishes. It is compatible with a variety of resin chemistries including, but not limited to, high solids alkyds, polyesters, and acrylics. ADDITOL® XL 481 contains no silicone ingredients.
ADDITOL® XL 482 FLOW
ADDITOL® XL 482 FLOW additive is a cost effective flow modifier developed for use in a wide range of solvent-borne applications including coil coatings, OEM & vehicle refinish, industrial coatings and wood finishes. At 100% solids, it is a perfect companion for low VOC coatings as well as sensitive compositions that require specific solvents. It is effective with most resin chemistries including, but not limited to, high solids alkyds, polyesters, and acrylics. ADDITOL XL 482 contains no silicone ingredients.
ADDITOL® XL 490 FLOW
ADDITOL® XL 490 FLOW additive is a levelling and anticrater agent for enhancing the surface quality of paint film, without silicon addition.
ADDITOL® XL 6531 XFOAM
ADDITOL® XL 6531 XFOAM additive - anti foam/air release - is a solution of defoaming polymers without silicone. Suggested applications are industrial coatings, 2 comp. acrylic/isocyanate systems, unsaturated technical polyester resins and gel coats.
ADDITOL® XL 6557 DISP
ADDITOL® XL 6557 DISP is a crosslinkable polymeric grinding medium. It provides pigment wetting, low paste viscosity, and good pigment stabilization in pigment pastes. Finished coatings tinted with this product have high hardness, yellowing resistance, high gloss, good drying properties, and good water/weather resistance. It is recommended for solvent-borne industrial applications, such as coil coatings, marine and heavy duty anti-corrosive paints, agriculture, industrial wood, and other metal coatings.
ADDITOL® XL 6583 DISP
ADDITOL® XL 6583 DISP dispersant is a high molecular dispersing additive for paints with sensitive cure mechanism.
ADDITOL® XL 6592 DISP
ADDITOL® XL 6592 DISP additive -dispersants- is a high molecular dispersing additive for paints with sensitive cure mechanism, 100% active, solvent free, VOC free.
ADDITOL® XL 6593 DISP
ADDITOL® XL 6593 DISP is a dispersing additive, dispersant, pigment wetting and dispersing additive with cationic pigment anchoring groups. Recommended for the dispersion of diffucult dispersable inorganic and organic pigments. Shortens dispersing process, reducing viscosity and improving gloss. For industrial and automotive as well as architectural paints and colorants.
ADDITOL® XL 6597 XFOAM
ADDITOL® XL 6597 XFOAM additive is a solution of defoaming polymers without silicone. It is a strong defoamer for solvent-based and solvent-free coatings. It is very efficient in polar solvent-borne paints, while its slightly lower efficient in non-polar systems. It is higher in efficiency and less compatible than ADDITOL® XL 6531 XFOAM additive. Suggested applications are TPA - Alkyd - Nitrocellulose paint - Acid-cured wood finishes - Two-component polyurethane paints -Epoxy resin systems, - Unsaturated polyester systems and gel coats - Melamine cured APO / PE systems.
ADDITOL® XW 330 DISP
ADDITOL® XW 330 DISP additive is a wetting agent and dispersing agent suitable for both inorganic pigments and extenders in aqueous systems where it can be used to stabilize emulsion paints.
ADDITOL® XW 372 N XFOAM
ADDITOL® XW 372 N XFOAM additive - anti foam/air release - is a high-efficiency defoamer for waterborne dispersions, interior and exterior emulsion paints.
ADDITOL® XW 390
Additol® XW 390 is a flow and wetting agent without silicone addition for waterborne coating systems. It prevents flow defects in all waterborne coating systems and promotes substrate wetting.
ADDITOL® XW 393 XFOAM
ADDITOL® XW 393 XFOAM additive is a antifoam for waterborne paint systems, without silicone addition.
ADDITOL® XW 440 DISP
ADDITOL® XW 440 DISP additive is a wetting agent and dispersing agent suitable for both inorganic pigments and extenders in aqueous systems where it can be used to stabilize emulsion paints.
ADDITOL® XW 6528 DISP
ADDITOL® XW 6528 DISP is a water dilutable grinding medium which can be used for colour- and shading pigment pastes. It is compatible in waterborne air-drying and stoving alkyds, waterborne acrylic resins, UV curing systems, anodic deposition dipping lacquers, PU- dispersions and plastic dispersions. Additol® XW 6528 is co-crosslinking in melamine and isocyanate curing systems.
ADDITOL® XW 6532 DISP
ADDITOL® XW 6532 DISP -colorants/pigment pastes/concentrates/dispersants- is a water based highly efficient dispersing additive for organic - and carbon black pigments. It is recommended to be used as dispersant for the production of waterborne colorants.
ADDITOL® XW 6533 DRY
ADDITOL® XW 6533 DRY additive - drier/dryer/siccative - is a cobalt-free combination drier, water-emulsifiable. It contains a balanced metal combination which is necessary for an optimum oxidative drying. It may be added as siccative to all waterborne oxidatively drying alkyd resin paints.
ADDITOL® XW 6535 DISP
ADDITOL® XW 6535 DISP is a grinding medium, especially designed for low VOC decorative systems. The special composition allows high pigment loading and very good compatibility to common decorative water borne and solvent borne binder systems.
ADDITOL® XW 6565 DISP
ADDITOL® XW 6565 DISP -colorants/pigment pastes/concentrates/dispersants- is a unique multifunctional universal grinding medium, designed for performance optimized solventbased, waterbased and all low VOC decorative paints. The special composition yields benefits such as excellent color development, viscosity control and stabilization with all architectural pigments, and improved humidity and water resistance performance.
ADDITOL® XW 6569 XFOAM
ADDITOL® XW 6569 XFOAM additive - anti foam/air release - is a modified silicone based defoamer. It is emulsifier-free with no influence on rheology modifiers and resin stability. This highly effective defoamer is easy to incorporate into all waterborne paint systems.
ADDITOL® XW 6581 DISP
ADDITOL® XW 6581 DISP additive -dispersants/colorants/pigment pastes/concentrates/wetting- is an ionic and nonionic surfactant with pigment affinity groups for organic and\r\ninorganic pigments in waterborne coating systems
ADDITOL® XW 6582 DISP
ADDITOL® XW 6582 DISP is a wetting and dispersing agent for aqueous pigment concentrates.
ADDITOL® XW 6600 XFOAM
ADDITOL® XW 6600 XFOAM additive reduces macro and micro foam in all high gloss clear and pigmented waterborne paint systems for architectural, industrial coatings as well as printing inks and over print varnishes. Styrene-acrylate dispersions PU dispersions Waterborne alkyds Waterborne hybrids Waterborne 2K PUR. The recommended dosage is generally 0.05 - 0.8% on formulation. To ensure good distribution, and to avoid surface defects in the paint system, its recommended to incorporate ADDITOL® XW 6600 XFOAM with high shear forces.
ADDITOL® XW 6601 XFOAM
ADDITOL® XW 6601 XFOAM additive is an advanced defoamer for waterborne systems, designed to reduce macro and micro foam in high-gloss pigmented coatings and inks. Effective in architectural and industrial coatings, suitable for printing inks and overprint varnishes. ADDITOL® XW 6601 XFOAM has along-lasting defoaming performance, especially in high PVC paints and pigment pastes which requiring high shear forces and extended milling times\r\nCompatible Binder Systems: - Styrene-acrylate dispersions- Polyurethane (PU) dispersions- Waterborne alkyds - Waterborne hybrids - Waterborne 2K PUR systems It is stronger in defoaming and less comptible compared to ADDITOL XW 6600 XFOAM.
ADDITOL® XW 6602 XFOAM
ADDITOL® XW 6602 XFOAM additive is strong defoamer with high silicone modification. It\r\nreduces macro and micro foam in all high gloss clear and pigmented\r\nwaterborne paint systems for architectural, protective, industrial\r\ncoatings as well as printing inks and over print varnishes. Compatible Binder Systems: Styrene-acrylate dispersions- Polyurethane (PU) dispersions- Waterborne alkyds- Waterborne hybrids- Waterborne 2K PUR systems Waterborne 1K and 2K epoxy systems. Compared to ADDITOL® XW 6600 XFOAM and XW 6601 XFOAM it has a 4 times higher silicone modification.
Fibretech Athol Blue Fillcoat
Fibretech Vinyl Ester Fillcoat is one of the products in Allnex Composites Fibretech Pool Resurfacing System.
Fibretech Dove Grey Fillcoat
Fibretech Vinyl Ester Fillcoat is one of the products in Allnex Composites Fibretech Pool Resurfacing System.
FIBRETECH LAGOON BLUE FILLCOAT
Fibretech Vinyl Ester Fillcoat is one of the products in Allnex Composites Fibretech Pool Resurfacing System.
Fibretech Sand Fillcoat
Fibretech Vinyl Ester Fillcoat is one of the products in Allnex Composites Fibretech Pool Resurfacing System.
FIBRETECH SAPPHIRE FILLCOAT
Fibretech Vinyl Ester Fillcoat is one of the products in Allnex Composites Fibretech Pool Resurfacing System.
