Where it is used
Home / Paint & Coatings / ingredients
Paint & Coatings
EBECRYL® 160
EBECRYL® 160 is a reactive diluent commonly used in ultraviolet light (UV) and electron beam (EB) energy curable coatings and inks. It can be used to impart crosslinking to energy curable coatings and inks while maintaining a degree of flexibility and toughness. Of the common triacrylate diluents used in energy curable formulations, EBECRYL® 160 exhibits the highest reactivity and the greatest viscosity reduction of oligomers. EBECRYL® 160 is a reactive diluent compatible with a wide range of acrylated resins used in UV/EB curing applications. Hardness, abrasion resistance, and high gloss properties make EBECRYL®160 popular for overprint varnishes, inks, coatings and electronic applications such as photoresists.
Documents
No document is attached to this grade yet.
Availability
Allnex publishes documents in the marked regions.
Also from Allnex
AEROTEX® NMA-LF Monomer
AEROTEX® NMA-LF is specifically designed to provide effective selfcrosslinking performance together with a significant reduction in both the formaldehyde present in the resulting emulsion polymer and the formaldehyde released to the environment upon curing. AEROTEX® NMALF combines the cost effectiveness of AEROTEX® NMA with a dramatic reduction in total formaldehyde. The active self-crosslinking species of AEROTEX® NMA-LF is N-methylolacrylamide (NMA). NMA contains both a vinyl group and an N-methylol group. The vinyl group is reactive and enables the NMA to be readily incorporated into a variety of polymer backbones. Once incorporated into the polymer, the methylol group can be triggered to undergo crosslinking with itself, other functional groups in the polymer (such as hydroxyls or amines), or with cellulosic substrates. The bifunctional feature of AEROTEX® NMA-LF ultimately results in latex binders which provide important performance properties to the final product, such as wet strength, tear strength, and solvent resistance.
ALNOVOL® PN 160
Alnovol® PN 160/PAST is a non-self-curing phenolic resin of the novolak type. This product is suitable for reinforcing natual rubber, styrene-butadiene rubber, EPDM rubber and nitrile rubber. Alnovol® PN 160/PAST is readily absorbed by the rubber mix and they have a strong plasticizing effect.
ALNOVOL® PN 320/PAST
ALNOVOL® PN 320/PAST is a non-self-curing phenolic resins of the novolak type. It's usable to petrol-resistant coatings, sealers and electro insulating varnishes.
ALNOVOL® PN 430/GGMA
ALNOVOL® PN 430/GGMA is a non self-curing novolac.
