Paint & Coatings

ALNOVOL® PN 160

Alnovol® PN 160/PAST is a non-self-curing phenolic resin of the novolak type. This product is suitable for reinforcing natual rubber, styrene-butadiene rubber, EPDM rubber and nitrile rubber. Alnovol® PN 160/PAST is readily absorbed by the rubber mix and they have a strong plasticizing effect.

Supplier profile

Documents

No document is attached to this grade yet.

Where it is used

Availability

Allnex publishes documents in the marked regions.

Supplier details

Allnex lists this grade in the Chemicals DB directory.

More grades from Allnex

Also from Allnex

AEROTEX® NMA-LF Monomer

AEROTEX® NMA-LF is specifically designed to provide effective selfcrosslinking performance together with a significant reduction in both the formaldehyde present in the resulting emulsion polymer and the formaldehyde released to the environment upon curing. AEROTEX® NMALF combines the cost effectiveness of AEROTEX® NMA with a dramatic reduction in total formaldehyde. The active self-crosslinking species of AEROTEX® NMA-LF is N-methylolacrylamide (NMA). NMA contains both a vinyl group and an N-methylol group. The vinyl group is reactive and enables the NMA to be readily incorporated into a variety of polymer backbones. Once incorporated into the polymer, the methylol group can be triggered to undergo crosslinking with itself, other functional groups in the polymer (such as hydroxyls or amines), or with cellulosic substrates. The bifunctional feature of AEROTEX® NMA-LF ultimately results in latex binders which provide important performance properties to the final product, such as wet strength, tear strength, and solvent resistance.

ALNOVOL® PN 320/PAST

ALNOVOL® PN 320/PAST is a non-self-curing phenolic resins of the novolak type. It's usable to petrol-resistant coatings, sealers and electro insulating varnishes.

ALNOVOL® PN 430/GGMA

ALNOVOL® PN 430/GGMA is a non self-curing novolac.

ALNOVOL® PN 650/60B

ALNOVOL® PN 650/60B is designed to act as a modifier of heat curable phenolic/polyester resin combinations (BADGE-free & BPA-NI systems) and phenolic/epoxy resin formulas. An addition of 20 - 40% of ALNOVOL® PN 650/60B as solid on total dry film solid improves the flexibility of the coating by maintaining the chemical resistance. Positive effects in regards to leveling and substrate adhesion could be observed as well. Application areas are the interior and exterior layer of metal packaging goods like collapsibletubes,cans and drums for water,oils and food.