Home / Graphic Arts & Inks / Suppliers / BASF SE, Intermediates Division 巴斯夫中间体
Graphic Arts & Inks
BASF SE, Intermediates Division 巴斯夫中间体
BASF SE, Intermediates Division 巴斯夫中间体 lists 89 grades in Graphic Arts & Inks. The sheets saved on this site are below.
Grades from BASF SE, Intermediates Division 巴斯夫中间体
3-(Cyclohexylamino) propylamine
3-(Cyclohexylamino) propylamine is a cross linker for epoxy resins. 3-Cyclohexylaminopropylamine is suitable for two-component epoxy coatings and for epoxy-based plastic parts. 3-Cyclohexylaminopropylamine is very compatible with co-resins and improves resistance against humidity during film formation.
3-(Dimethylamino) propylamine
3-(Dimethylamino) propylamine is a building block for modification of epoxy resins. 3-(Dimethylamino) propylamine modified epoxy resins are used for cationic electro deposition coatings.
3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan
3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan is a cross linker for epoxy resins, building block for polyamides and polyurethanes. 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine)is suitable for two-component epoxy coatings, for epoxy-based adhesives and epoxy composites. The hydrophobic structure of 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine) improves the hydrolytical resistance, increases reactivity and compatibility in epoxy coatings.
4-Hydroxybutyl vinyl ether (HBVE)
4-Hydroxybutyl vinyl ether (HBVE) is a building block for macro monomers and monomer for vinyl copolymers, reactive diluents for UV coatings. Ethoxylatated HBVE is used as a monomer for concrete additive. Used for water and solvent based hydroxyfunctional vinyl polymers, which are cross-linked with polyisocyanates and melamine resins.
4,4'-Diaminodicyclo-hexylmethane
4,4'-Diaminodicyclo-hexylmethane is a cross linker for epoxy resins, building block for polyamides. Diaminodicyclo-hexylmethane is used for two-component epoxy coatings and for epoxy-based adhesives. Diaminodicyclo-hexylmethane ensures an optimal balance of hardness and flexibility.
4,4'-Methylenedianiline, MDA
4,4'-Methylenedianiline, MDA is a building block for polyimides, polyamideimides, polyesterimides, special cross linker agent for epoxy resins. Polyimides, polyamideinmides, and polyesterimides resins based on 4,4'-Methylenedianiline can be used for electro insulation coatings, 4,4'-Methylenedianiline is also used as epoxy cross linker for special epoxy powder coatings.
4,7,10-Trioxatridecan- 1,13-diamine
4,7,10-Trioxatridecan- 1,13-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,7,10-Trioxatridecan-1,13-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coatings. It also improves the flexibility of coatings.
4,9-Dioxadodecan- 1,12-diamine
4,9-Dioxadodecan- 1,12-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,9-Dioxadodecan-1,12-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coatings. It also improves the flexibility of coatings.
Benzylamine
Benzylamine is a building block for crystalline ureas. Crystalline ureas based on benzylamine act as sag control agents for stoving enamels.
Capromer™ PD1–10
Capromer™ PD1–10 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 1000. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired.
Capromer™ PD1–10 A
Capromer™ PD1–10 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity.
Capromer™ PD1–20
Capromer™ PD1–20 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 2000. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired.
Capromer™ PD1–20 A
Capromer™ PD1–20 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity.
Capromer™ PD4-05 (PolyCLO DEG550)
Capromer™ PD4-05 (PolyCLO DEG550) is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Diethylene glycol with a molecular weight of 550. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired.
Capromer™ PT1–05 (PolyCLO TMP540)
Capromer™ PT1–05 (PolyCLO TMP540) is a polycaprolactone based polyester polyol for polyurethane based coatings and adhesives. The trifunctional product is based on Trimethylolpropane a molecular weight of 540. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired.
Cyclohexyl vinyl ether, CHVE
Cyclohexyl vinyl ether, CHVE monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility.
Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203
Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 catalyst for urethane reactions. Diazabicyclooctane is suitable for production of polyurethanes and as catalyst for two-components paints (automotive OEM and repair paints, plastic paints and paints for general industry).
Diethanolamine, pure
Diethanolamine, pure is a neutralisation agent for water based coatings, building block for the modification of epoxy resins and polyurethanes. Diethanolamine modified epoxy resins are used for cationic electro deposition coatings.
Diethylene triamine
Diethylene triamine is a cross linker for epoxy resins, building block to modify epoxy resins. Diethylene triamine is used for two-component epoxy coatings and for epoxy composites. Modified epoxy resins with diethylene triamine are used for cationic electro deposition coatings (CED-coating).
Diethyleneglycol divinyl ether, DVE-2
Diethyleneglycol divinyl ether is a reactive diluent for unsaturated poly-esters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based sealant compounds.
Diisopropanolamine
Diisopropanolamine is a neutralization agent for anionic stabilized resins, building block for polyurethanes. Diisopropanolamine is suitable for waterborne stoving enamels based on polyesters, alkyds and acrylic resins (secondary dispersions). Diisopropanolamine supports the film forming of stoving enamels.
epsilon-Caprolactone, CLO
Epsilon-Caprolactone, CLO can be used as an intermediate for two-components paints for plastic coatings and automotive repair coatings, for poly-urethane dispersions for waterborne coatings and for UV-coatings. Epsilon-Caprolactone, CLO with a combination of flexibility and hardness (toughness) epsilon-Caprolactone can provide special mechanical properties in segmented polymers.
Ethylene diamine
Ethylene diamine is a cross linker for epoxy resins, building block for polyamides and polyurethanes. Ethylene diamine is frequently used in epoxy coatings and adhesives as well as in epoxy composites. In addition, it can be used as chain extender for waterborne polyurethane dispersions.
Ethylene urea, N,N'-Ethyleneurea, 2-Imidozolidone
Ethylene urea, N,N'-Ethyleneurea, 2-Imidozolidone is effective formaldehyde scavenger in amino-resins like urea-formaldehyde (UF), melamine-formaldehyde (MF) or melamine-urea-formaldehyde (MUF) condensates.
Formic acid
Formic acid is an additive for coatings and a neutralization agent (i.e. cationic electro deposition paints). Formic acid is used in resin production for CED-resins.
Hydroxypivalic acid neopentylglycolester, HPN
Hydroxypivalic acid neopentylglycolester, HPN is a building block for saturated polyesters, unsaturated polyesters and polyurethanes. HPN is suitable for polyesters for solvent-borne paints (stoving enamels for can-& coil-coating, automotive coatings, coatings for industrial applications) and for two-component paints (plastic coatings, repair coatings). HPN polyesters are used preferentially used for waterborne paints, but also suitable for polyesters in powder coatings.
Imidazole
Imidazole is a catalyst for epoxy reactions, blocking agent for polyisocyanates. Imidazole is used as catalyst for the modification of epoxy resins and for two components epoxy systems. It is suitable as a blocking agent for polyisocyanates in powder coatings.
Iso-Butyl vinyl ether, IBVE
Iso-Butyl vinyl ether, IBVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility.
Isophorone diamine
Isophorone diamine is a cross linker for epoxy resins, building block for polyamides. Isophorone diamine is used in epoxy coatings, epoxy adhesives and epoxy composites. Isophorone diamine improves the hydrophobicity of epoxy resins with less sensitivity against humidity while film formation.
Liquid NVC
Liquid NVC is a reactive diluent for radiation curing coating and inks. It is liquid at room temperature, has high cure speed, excellent viscosity reduction, excellent substrate wetting, and improves adhesion.
N-(3-Aminopropyl)-imidazole, Lupragen® API
N-(3-Aminopropyl)-imidazole, Lupragen® API is a selective catalyst for epoxy and urethanes reactions, building block for special segmented polymers (e. g. polyurethanes). N-(3-Aminopropyl)-imidazole is used for two components epoxy systems and for modification of epoxy resins and for preparation of polyurethanes. When forming urethanes or ureas, N-(3-aminopropyl)-imidazole is incorporated into the polymer structure and improves the adhesion properties of the resin.
N-Dodecyl vinyl ether, DDVE
N-Dodecyl vinyl ether, DDVE is a monomer for copolymers of n-Dodecyl vinyl ether are used as raw materials for coatings defoamers, waxes, lubricants, pigment additives, vinyl homo- and copolymers (cationic mechanism). It is a reactive diluent for epoxy silanes and silicon acrylate-based release coatings. Copolymers of n-Dodecyl vinyl ether are used as formulation additive in water- and solvent borne coatings formulations. n-Dodecyl vinyl ether improves hydrophobicity of polymers as well as surface active behavior.
N-Ethylpyrrolidone, NEP
N-Ethylpyrrolidone, NEP is a special polar solvent for cleaning of metals, glasses and plastics; for pretreating of plastics, for polyurethane dispersions and for high polar resins and resin production. N-Ethylpyrrolidone is used in plastic coatings, for water-borne coatings, and for electro insulation coatings. In many applications N-Ethylpyrrolidone can replace N-Methylpyrrolidone.
N-Methylethanolamine
N-Methylethanolamine is a building block for the modification of epoxy resins. Methylethanolamine modified epoxy resins are suited for cationic electro deposition coatings.
N-Methylpyrrolidone, NMP
N-Methylpyrrolidone, NMP is a universal polar solvent for cleaning of metals, glasses and plastics, for pretreating of plastics, for polyurethane dispersions and for high polar resins and resin production. N-Methylpyrrolidone is used for plastic coatings, for water-borne coatings and for electro insulation coatings.
N-Octadecyl vinyl ether, ODVE
N-Octadecyl vinyl ether, ODVE is used as raw material for coatings defoamers, waxes, lubricants, pigment additives, vinyl homo- and copolymers (cationic mechanism). Reactive diluent for epoxy silanes and silicon acrylate-based release coatings. Copolymers of n-Octadecyl vinyl ether are used as formulation additive in water- and solvent borne coatings formulations. N-Octadecyl vinyl ether improves hydrophobicity of polymers as well as surface active behavior.
N-Vinyl-Caprolactam, NVC
N-Vinyl-Ccaprolactam, NVC is a reactive diluent for UV adhesives and UV inks, especially screen & digital printing inks / ink jet printing inks. It is a reactive diluent for industrial UV coatings, especially in optical fiber coatings and rapid prototyping. N-Vinylcaprolactame, is a co-monomer for hydrophobic modified PVP (Polyvinylpyrrolidone) especially used in oilfield, cosmetics and adhesives.
N-Vinylpyrrolidone, NVP
N-Vinylpyrrolidone, NVP is a reactive diluent for radiation curing in UV coatings, UV inks and UV adhesives. N-Vinylpyrrolidone, NVP is a monomer for water soluble Polyvinylpyrrolidones (PVP) with uses in oil-field, cosmeticsand adhesives. It is a reactive diluent in UV coatings, UV inks and UV adhesives.
Neopentane diamine
Neopentane Diamine is a cross linker for epoxy resins, building block for polyamides. Neopentane diamine is frequently used in epoxy coatings as well as in epoxy composites and adhesives. Neopentane diamine is highly reactive and readily mixable with epoxy resins. Due to its structure, it is less water-sensitive compared to non-branched aliphatic amines.
N,N'-Bis-(3-aminopropyl)-ethylenediamine, N4-Amine
N,N'-Bis-(3-aminopropyl)-ethylenediamine, N4-Amine is a cross linker for epoxy resins. N,N'-Bis-(3-aminopropyl)-ethylene diamine is used for two-component epoxy coatings, epoxy-based adhesives and plastic parts. Due to its high functionality and low equivalent weight, N,N'-Bis-(3-aminopropyl)-ethylene diamine enables high cross linking density.
N,N-BIS(3-Aminopropyl)-methylamine
N,N-BIS(3-Aminopropyl) methylamine is a potential building block for polyurethanes, cross linker for epoxy resins. N,N-Bisaminopropyl-methylamine is suitable for epoxy coatings and epoxy-based plastic parts. It may be used to prepare cationic stabilized polyurethane dispersions.
N,N-DI-(2-hydroxyethyl) aniline
N,N-DI-(2-hydroxyethyl) aniline is an accelerator for radical initiated polymerization of unsaturated polyesters. Catalyst for epoxy reactions.
N,N-Diethylethanol-amine
N,N-Diethylethanol-amine is a catalyst for urethane reaction, neutralization agent for anionic stabilized waterborne resins. N,N-Diethylethanolamine is well suitable for the production of polyurethanes and as catalyst for two-component paints. N,N-Diethylamine is also used as neutralization agent in paints based on waterborne polyesters, alkyds, acrylic resins and polyurethanes.
N,N-Diisopropanol-P-toluidine
N,N-Diisopropanol-P-toluidine is an accelerator for radical initiated polymerization of unsaturated polyesters, Catalyst for epoxy reactions. Coatings technology for composite production.
N,N-Dimethylbenzyl-amine Lupragen® N 103
N,N-Dimethylbenzyl-amine Lupragen® N 103 is a catalyst for urethane reactions, for epoxy reactions and co-catalysts for radical initiated polymerization of unsaturated polyester resins. N,N-Dimethylbenzyl-amine is used to modify epoxy resins. The modified epoxy resins are used for cationic electro deposition coatings. N,N-Dimethylbenzyl-amine is used as catalyst for the production of polyurethanes (e.g. for plastic parts).
N,N-Dimethylcyclohexyl-amine Lupragen® N 100
N,N-Dimethylcyclohexyl-amine Lupragen® N 100 is a catalyst for isocyanate reactions. Coatings technology for polyurethane resin production.
N,N-Dimethylethanol-amine Lupragen® N 101
N,N-Dimethylethanol-amine Lupragen® N 101 is a catalyst for urethane reaction, neutralization agent for anionic stabilized waterborne resins. N,N-Dimethylethanolamine can be used for the synthesis of polyurethanes and as catalyst for two-component paints. N,N-Dimethylethanolamine is also used as neutralization agent in paints based on water-borne polyesters, alkyds, acrylic resins and polyurethanes.
NPG, Neol® Neopentylglycol
NPG, Neol® Neopentylglycol is a versatile building block for polyesters for solvent-borne paints. It is used in stoving enamels for automotive coatings, can and coil-coatings and for general industry applications. It is used for two-component paints for plastic coatings and for repair coatings. Neopentyl-glycol is used for water borne polyesters for automotive coatings, repair coatings and coatings for general industry. It is also used for polyesters for powder coatings.
Polyetheramine D 2000
Polyetheramine D 2000 is a flexible cross linker for epoxy resins and a building block for polyisocyanates. Polyetheramine D 2000 is used for two component (2K) epoxy coatings and as component for polyurea coatings. It is used for floor coatings, pipes and industrial constructions. Polyetheramine D 2000 improves flexibility and chemical resistance.
Polyetheramine D 230
Polyetheramine D 230 is a flexible cross linker for epoxy resins and a building block for polyisocyanates. Polyetheramine D 230 is used for two component (2K) epoxy coatings and as component for polyurea coatings, floor coatings, pipes and industrial constructions. Polyetheramine D 230 improves flexibility and chemical resistance.
Polyetheramine D 400
Polyetheramine D 400 is a flexible cross linker for epoxy resins, building block for polyisocyanates. Polyetheramine D 400 is used for two component (2K) epoxy coatings and as component for polyurea coatings. It is used for floor coatings, pipes and industrial constructions. Polyetheramine D 400 improves flexibility and chemical resistance.
Polyetheramine T 403
Polyetheramine T 403 is a flexible cross linker for epoxy resins, building block for polyisocyanates. Polyetheramine T 403 is used for two component (2K) epoxy coatings and as component for polyurea coatings. It is used for floor coatings, pipes and industrial constructions. Polyetheramine T 403 improves flexibility and chemical resistance.
Polyetheramine T 5000
Polyetheramine T 5000 is a flexible cross linker for epoxy resins, building block for polyisocyanates. Polyetheramine T 5000 is used for two component (2K) epoxy coatings and as component for polyurea coatings, both used for floor coatings, pipes and industrial constructions. Polyetheramine T 5000 improves flexibility and chemical resistance.
Polythf® 1000, 1000 S (Polytetrahydrofurane) polytetramethylene ether glycol
PolyTHF® 1000 and 1000 S are building blocks for plasticizer, and soft segment of polyurethane dispersions. Polymers with PolyTHF® 1000 and 1000 S are suitable for plastic-, foil- and leather coatings. PolyTHF® 1000 and 1000 S introduce flexibility into polymer molecules.
Polythf® 1400 (Polytetrahydrofurane) polytetramethylene ether glycol
PolyTHF® 1400 is building block for plasticizer, and soft segment of poly-urethane dispersions. Polymers with PolyTHF® 1400 are suitable for plastic-, foil- and leather coatings. PolyTHF® 1400 introduces high flexibility into polymer molecules.
Polythf® 1800 (Polytetrahydrofurane) polytetramethylene ether glycol
PolyTHF® 1800 is building block for plasticizer, and soft segment of polyurethane dispersions. Polymers with PolyTHF® 1800 are suitable for plastic-, foil- and leather coatings. PolyTHF® 1800 introduces high flexibility into polymer molecules.
PolyTHF® 2000, 2000 S (Polytetrahydrofurane) Polytetramethylene ether glycol
PolyTHF® 2000, 2000 S (Polytetrahydrofurane) Polytetramethylene ether glycol are building blocks for plasticizer, and soft segment of polyurethane dispersions. Polymers with PolyTHF® 2000 and 2000 S are suitable for plastic-, foil- and leather coatings. PolyTHF® 1000 and 1000 S introduce high flexibility into polymer molecules.
PolyTHF® 250 techn. (Polytetrahydrofurane) Polytetramethylene ether glycol
PolyTHF® 250 techn. (Polytetrahydrofurane) Polytetramethylene ether glycol is building block for plasticizer, and soft segment for polyurethane dispersions. Polymers with PolyTHF® 250 techn. are suitable for plastic-, foil- and leather coatings. PolyTHF® 250 techn. introduces flexibility into polymer molecules.
PolyTHF® 650 S (Polytetrahydrofurane) Polytetramethylene ether glycol
PolyTHF® 650 S (Polytetrahydrofurane) Polytetramethylene ether glycol is building block for plasticizer, and soft segment of polyurethane dispersions. Polymers with PolyTHF® 650 S are suitable for plastic-, foil- and leather coatings. PolyTHF® 650 S introduces flexibility into polymer molecules.
Propylene carbonate
Propylene carbonate solvent for polar resins ( i.e. polyesters, polyurethanes, polyester imides and plasticizers). Propylene carbonate is suitable for wire enamels based on polyesters, polyurethanes, polyesterimides, epoxy and phenol resins. Propylene carbonate is a highly polar solvent. A modified version, Solvarnol® PCA may replace phenol, cresols and xylenols in electro insulation formulations.
Baxxodur™ EC 110
Baxxodur™ EC 110 is an aliphatic amine based fast curing agent with low viscosity. Applications include, epoxy grout in construction, epoxy coating in marine and maintenance, casting and encapsulation, composite lamination, intermediate for polyamide.
Baxxodur™ EC 130
Baxxodur™ EC 130 is a polyether amine based curing agent with low viscosity and high reactivity. Applications include, structural adhesive and composite lamination.
Baxxodur™ EC 201
Baxxodur™ EC 201 is a cycloaliphatic amine based curing agent with low viscosity and moderate reactivity. Applications include, structural adhesive, flooring, grout, coating in construction, composite lamination, casting and encapsulation, and heavy duty protective coating.
Baxxodur™ EC 252
Baxxodur™ EC 252 is a cycloaliphatic amine based curing agent with very low viscosity and moderate reactivity. Applications include structural adhesive, heavy duty epoxy coating, composite lamination, casting and encapsulation, epoxy prepreg.
Baxxodur™ EC 301
Baxxodur™ 301 is a polyether amine based curing agent with low viscosity and long pot life. Applications include, structural adhesive, construction, composite lamination casting and encapsulation, decorative and protective coating.
Baxxodur™ EC 302
Baxxodur™ 302 is a polyether amine based curing agent with low viscosity and long pot life. Applications include, composite, structural adhesive and epoxy toughener.
tert.-Amyl alcohol
Tert.-Amyl alcohol special solvent for coatings. Tert.-Amyl alcohol is suitable for two-components (2K) polyurethane coatings (automotive repair coatings, plastic coatings). It increases the pot-life of two-component (2K) coatings.
tert.-Butylvinylether, t-BVE
Tert.-Butylvinylether, t-BVE monomer for copolymers with vinyl chlorides. T-Butyl vinyl groups in polymers can be easily transferred in hydroxyl function (protective group). Copolymers with t-Butyl vinyl ether are used for solvent based anti-corrosion coating.
TMP (Hydro)® Trimethylol-propane
TMP (Hydro)® Trimethylol-propane building block for alkyd resins, saturated & unsaturated polyesters, poly-urethanes, additive for waterborne paints and as backbone molecule for alkoxylation. Trimethylolpropane is the most common polyol for different types of alkyds and branched polyesters, it is easily esterified or transest.
Triethylamine anhydrous
Triethylamine anhydrous is a chemical compound which can be used as a catalyst for isocyanate reactions and as a neutralization agent for anionic stabilized waterborne resins. Triethylamine is used as a catalyst for the synthesis of polyurethanes and for two-component paints. Triethylamine is suitable as neutralization agent in waterborne paints based on polyesters, alkyds, acrylic resins and polyurethanes containing carboxyl or other acidic groups. Due to excellent water solubility and lack of active hydrogen atoms, triethylamine is often used for the production of water-borne polyurethane dispersions.
Triethyleneglycol di vinyl ether, DVE-3
Triethylenglycol divinyl ether is a reactive diluent for unsaturated polyesters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based sealant compounds. Triethylenglycol divinyl ether performs low viscosity in UV-coatings, especially in cationic polymerization. No labeling, no risk phrase.
Triphenylphosphine
Triphenylphosphine is a catalyst for epoxy reactions. Triphenylphosphine is used in resin production, e.g. for epoxy modification used in CED-coatings.
1-Vinylimidazole, VIM
1-Vinylimidazole, VIM is reactive diluent for UV coatings (inks, adhesives, general coatings). A monomer for water soluble specialty polymers (oilfield and cosmetics). It has high reactivity for radical polymerization and improves wetting and adhesion on plastic.
1,2-Dimethylimidazole, Lupragen DMI
1,2-Dimethylimidazole, Lupragen DMI is a selective catalyst for epoxy and urethanes reactions. 1,2-Dimethylimidazole is used for two components epoxy systems and for modification of epoxy resins and for preparation of polyurethanes.
1,3-Diaminopropane
1,3-Diaminopropane is a cross linker for epoxy resins, building block for polyamides. 1,3-Diaminopropane is frequently used in epoxy coatings, epoxy composites and epoxy adhesives.
1,4-Butanediol, BDO
1,4-Butanediol, BDO is a building block for unsaturated polyesters, saturated polyesters and polyurethanes. It's suitable for flexible furniture coatings and repair putties and is used for flexible solvent borne paints, plasticizers and soft segments for polyurethanes.
1,4-Cyclohexane dimethanol divinyl ether, CHDM di
1,4-Cyclohexane dimethanol divinyl ether, CHDM di is a reactive diluent for unsaturated polyesters, UV coatings, UV inks, UV adhesives, release coatings and artificial marble.
1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono
1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono is a building block for macro monomers and monomer for vinyl copolymers. It is a reactive diluent in UV-coatings and in adhesives. It is used for water and solvent based hydroxyl-functional vinyl polymers, which are cross-linked with polyisocyanates and melamine resins.
1,5-Pentanediol, PDO
1,5-Pentanediol, PDO is a building block for saturated polyesters, unsaturated polyesters and polyurethanes, solvent for inkjet ink formulations. It's suitable for polyesters for solvent-borne paints (stoving enamels, two-components paints, can & coil coatings), polyester plasticizers and for soft segments for polyurethanes.
1,6-Hexanediol HDO®
1,6-Hexanediol HDO® is a building block for saturated polyesters and polyurethanes acrylic esters of 1,6-Hexanediol are used as reactive diluent for UV-coatings. 1,6-Hexanediol is used in polyesters for solvent-borne paints, in stoving enamels for automotive coatings, for can-& coil-coating and for general applications. It is preferentially used in two-component paints for plastic coatings and repair coatings. It is suitable for polyester plasticizers and in soft segments for polyurethanes.
1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700
1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 is a catalyst for urethane reactions. 1,8-Diazabicyclo-5,4,0-undecene-7 is suitable for production of polyurethanes and as catalyst for two-components paints for automotive OEM, repair paints, plastic paints and paints for general application. 1,8-Diazabicyclo-5,4,0-undecene-7 is highly effective. As a liquid, it is easy to handle and shows high compatibility with resins.
2-(2-Aminoethoxy) ethanol
2-(2-Aminoethoxy) ethanol is a building block for the modification of epoxy resins. 2-(2-Aminoethoxy) ethanol modified epoxy resins are suited for cationic electro deposition coatings.
2-Ethyl-4-Methylimidazole
2-Ethyl-4-Methylimidazole is a selective catalyst for epoxy and urethane reactions. 2-Ethyl-4-methylimidazole is used for two components epoxy systems, for the modification of epoxy resins and for preparation of polyurethanes.
2-Ethylhexanoic Acid, 2-EHA
2-Ethylhexanoic Acid, 2-EHA is a building block for alkyd resins and for production of organic metal salts. Alkyd resins modified with 2-ethylhexanoic acid are used in stoving enamels and two-component paints (primers and topcoats). Metal salts of 2-ethylhexanoic acid are used for siccatives in oxidative drying paints and printing inks.
2-Ethylhexylvinylether, EHVE
2-Ethylhexylvinylether, EHVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Copolymers with 2-Ethylhexyl vinyl ether are used for solvent based anti-corrosion coatings. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility.
2-Ethylimidazole
2-Ethylimidazole is a selective catalyst for epoxy and urethanes reactions. 2-Ethylimidazole is used for two components epoxy systems; for modification of epoxy resins and for preparation of polyurethanes.
2-Mercaptoethanol
2-Mercaptoethanol application fields include, tin type of stabilizer, chain transfer agent in polymerization processes, and anti-corrosion systems for oilfields. Mercaptoethanol is used in acrylic resin production of water-borne coatings.
2-Methylimidazole
2-Methylimidazole is a selective catalyst for epoxy and urethane reactions. 2-Methylimidazole is used for two components epoxy systems; for the modification of epoxy resins and for the preparation of polyurethanes.
2,4,7,9-Tetramethyl-decyne-5-diol-4,7, TMDD
2,4,7,9-Tetramethyl-Decyne-5-Diol-4,7, TMDD is an antifoaming and wetting agent for water-borne coatings and inks. TMDD is suitable for all water-borne coatings (ED-coatings, water-borne stoving enamels, water-borne house and wall paints) and inks.
