Where it is used
Home / Paint & Coatings / ingredients
Paint & Coatings
Barium Octoate 12.5%
Barium Octoate 12.5% is a clear liquid for use as a paint drier that is insoluble in water. It is an auxiliary drier that is good at maintaining drying under humid conditions.
Documents
No document is attached to this grade yet.
Availability
Patcham LTD publishes documents in the marked regions.
Supplier details
Patcham LTD lists this grade in the Chemicals DB directory.
Also from Patcham LTD
Interior/Exterior Gloss Paint (Formulation #21-10005)
Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing for 10 minutes at 2 ms-1. Grind at 4 ms-1 until desired Hegman gauge is achieved- 7+ NS/ <10 µm.
Interior/Exterior Matt Paint (Formulation #21-10005)
Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing for 10 minutes at 2 ms-1. Grind at 4 ms-1 until desired Hegman gauge is achieved. 5+ NS/ min. of 20 µm.
Interior/Exterior Semi Glossy Paint Waterborne Coatings (Formulation #21-10005)
Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing for 10 minutes at 2 ms-1. Grind at 4 ms-1 until desired Hegman gauge is achieved. -7 NS/ min. of 15 µm.
SB 2K PU Black Topcoat (Formulation #21-20242)
This formulation contains Pat-Add DA 3054, AF 174, LE 1023, and Patcat 3001.
