Where it is used
Home / Paint & Coatings / ingredients
Paint & Coatings
Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品
Genamin® 18 R 302 D is a raw material for the manufacture of quaternary ammonium compounds, betaines and amine oxides. Dimethyl fatty alkylamines are liquid or pasty,water insoluble bases. They are readily soluble in organic solvents such as mineral oil, isopropanol and chloroform. The basicity of the dimethyl fatty amines is slightly less marked than that of primary and secondary fatty amines.
No document is attached to this grade yet.
Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 publishes documents in the marked regions.
Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 lists this grade in the Chemicals DB directory.
More grades from Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品
Antimussol® 4752 is a defoaming agent for aqueous formulations. It is an aqueous solution of fatty derivatives with a small polysiloxane component. This white dispersion is used in a wide range of foaming media including: emulsion paints; polymer dispersions; emulsions and pigment dispersions; pigment preparations with organic and inorganic pigments, e.g. tinting pastes; concrete; works and waste water.
Antimussol® 4846N is a defoaming agent for aqueous formulations. It is a mixture of hydrocarbons and fatty acid ethoxylates. Antimussol® 4846N is a combined defoamer/de-aerator with wetting properties. It develops its full efficacy in the acid and alkaline region. As a product which is free from phosphoric acid esters there is no danger to attack on plastics/rubbers. This product can be pre-diluted with water to a white emulsion. It can also be added in a water spray which is sprayed onto the foaming medium (e.g. to defoam wastewater). When mixing into concentrates Antimussol® 4846N should be added undiluted and stirred until homogeneous.
Antimussol® TIP is a general-purpose waste water defoamer. It is a mixture of phosphoric acid esters and isobutanol. The defoamer is supplied in ready-to-use form, and no further dilution is necessary. It can also be used as a defoamer for textile detergents. Antimussol® TIP destroys foam produced by the various classes of surfactant. The most effictive method of defoaming is to spray the product onto the foam.
Antimussol® TW Liquid is a defoaming agent for aqueous formulations. It is a mineral oil-free defoamer based on fatty derivatives. This white, aqueous dispersion is sprayed onto the surface of the foaming medium preferably at points with high liquor turbulence, either undiluted or diluted up to 1:5 with water. It is suggested for the following applications: emulsion paints; polymer dispersions; emulsions and pigment dispersions; pigment preparations with organic and inorganic pigments, e.g. tinting pastes; preferably acid detergent formulations; concrete; works and waste water; and metal processing agents.