Home / Household & Industrial Cleaners / Suppliers / Ascent Chemicals
Household & Industrial Cleaners
Ascent Chemicals
Ascent Chemicals lists 118 grades in Household & Industrial Cleaners. The sheets saved on this site are below.
Grades from Ascent Chemicals
SierraMide DEA
SierraMide DEA is a Cocamide/DEA 1:1 that is 100% active. Cocamide DEA is derived from the fatty acids from coconut oil and diethanolamine (DEA). In cosmetics and personal care products, SierraMide DEA is used in the formulation of bath soaps and shampoo. SierraMide DEA exhibits powerful foaming action alone or as a foam booster. SierraMide DEA has a wide range of practical uses because of its wetting, detergency, foaming, and low cost.
SierraMide MEA
SierraMide MEA is a surfactant and foam stabilizer derived from Lauric Acid and Monoethanolamine (MEA). It is widely used in personal care, household, and industrial cleaning products due to its foam-boosting, thickening, and emulsifying properties. Additionally, it is compatible with anionic and amphoteric surfactants, further enhancing formulation flexibility in various cleaning and personal care applications.
SierraMine LO
SierraMine LO is a nonionic to mildly cationic surfactant derived from lauryl dimethylamine and hydrogen peroxide. It is known for its foam-boosting, emulsifying, and viscosity-enhancing properties, making it a key ingredient in personal care, household cleaning, and industrial formulations.
SierraPhos 2-EH
SierraPhos 2-EH acid form is a concentrated surfactant made by the reaction of 2 Ethyl hexanol with P205. The material can be used in its acid form or neutralized to make a variety of functional surfactants. The widest use of this material is as a building block for antistats for textiles and plastics, and as a penetrating surfactant that can be used in several cleaners and functional chemicals. The acid form of SierraPhos 2EH is the most economical and versatile form of this chemistry, other neutralized forms are also available.
SierraPhos 2-EH 2 EO
SierraPhos 2-EH 2 EO is a neutralized phosphate ester made from 2 EH ethoxylate. The product is used in a number of industrial applications because of its very high stability to caustic, ability to wet and penetrate substrates, and very low foaming characteristics. SierraPhos 2-EH 2 EO can also be used as a coupling agent in detergent and chemical formulation. SierraPhos 2-EH 2 EO can be used as an antistatic agent in many systems compatible with strong anionic charge. As an antistatic treatment, SierraPhos 2-EH 2 EO is typically sprayed or padded on to the substrate then dried. The durability of the antistatic finish will vary according to amount applied, treatment method, curing, and the substrate that it treated.
SierraPhos DA-4
SierraPhos DA-4 is an acid form phosphate. It can be neutralized to make an antistats or caustic stable wetting agent. SierraPhos DA-4 can also be used as a chemical intermediate in other processes. Compliance Highlights Unavailable
SierraPhos DA-6
SierraPhos DA-6 is an acid form phosphate. It can be neutralized to make an antistats or caustic stable wetting agent. SierraPhos DA-6 can also be used as a chemical intermediate in other processes. Compliance Highlights Unavailable
SierraPhos NP-10
SierraPhos NP-10 is a phosphated nonylphenol ethoxylate (NPE) surfactant created by reacting NPEs with diphosphorous pentoxide. Also referred to as phosphated NPE or nonylphenol ethoxylate phosphate ester, this chemistry combines the strong emulsifying, dispersing, and detergency properties of NPEs with the added benefits of wetting and corrosion inhibition from the phosphate group. It offers good solubility, acid stability, and detergency, making it a versatile choice in industrial cleaners and agricultural formulations where both cleaning power and stability under harsh conditions are required.
SierraPhos NP-9
SierraPhos NP-9 is a surfactant and emulsifier derived from nonylphenol ethoxylates (NPEs) reacted with diphosphorous pentoxide. It combines the emulsifying, dispersing, and detergency properties of NPEs with enhanced wetting and corrosion inhibition from the phosphate group. This results in a versatile surfactant with good solubility, acid stability, and detergency, commonly used in industrial cleaners, agricultural formulations.
SierraPhos TDA-6
SierraPhos TDA-6, Phosphated TDA-6, is a general-purpose phosphate ester that can be used as an emulsifier, dispersant, wetting agent, or surfactant. Compliance Highlights Unavailable
SierraPlas DM
SierraPlas DM is a co-monomer. It can be used in the production of derivatives of succinic acid as well as other organic synthesis and emulsion polymerizations. Compliance Highlights Unavailable
SierraPlas OO
SierraPlas OO or 2-Ethylhexyl Oleate is a fatty acid ester that can be used as an anti-wear additive in metal working fluids and lubricants as well as a processing aid and plasticizer for tire compounding. Compliance Highlights Unavailable
SierraQuat 90
SierraQuat 90 is an imidazoline, Diethyl Sulfate Quat that is 90% active. It is a highly reacted material with a very high closure and a minimum of unreacted material. SierraQuat 90 is a formulation additive for tissue manufacturing offering excellent softness, good release to prevent sticking & tearing of tissue, and very low yellowing. It has a long and successful history of use in the paper industry with consistently good performance in a variety of products. Because SierraQuat 90 has a strong cationic charge, it has also been used successfully as a primary emulsifier in car wash rinse aids where mineral oil is delivered to the auto surface to shed water. Likewise, it is used to offer charge to carnauba waxes. SierraQuat 90 can be used as an emulsifier and cationic surfactant in a variety of formulations for cleaners.
SierraQuat 90 LVOC
SierraQuat 90 LVOC is an imidazoline, diethyl sulfate Quat that is 90% active. It is a highly reacted material with a very high closure and a minimum of unreacted material. SierraQuat 90 LVOC is a formulation additive for tissue manufacturing offering excellent softness, good release to prevent sticking & tearing of tissue, and very low yellowing. It has a long and successful history of use in the paper industry with consistently good performance in a variety of products. The % VOC for SierraQuat 90 LVOC is less than 1%. SierraQuat 90 LVOC can be used as an emulsifier and cationic surfactant in a variety of formulations for cleaners.
SierraQuat TAM 15 DES
SierraQuat Tam 15 DES is a highly active quaternary ammonium derivative made from the reaction of tallow amine 15 and diethyl sulfate. The resulting chemical intermediate is a strongly charged surfactant that can be used in detergent formulation, process auxiliary formulation, and as a cationic emulsifier. SierraQuat TAM 15 DES is very common in the formulation of levelling agents for retarding anionic dyes (acid, direct, reactive, milling, and premetallized acid. As a cationic emulsifier, SierraQuat TAM 15 DES is very effective for most systems. The material is more easily dispersed than some cationic surfactants but still will need adequate mixing and is more readily dispersed into warm water. SierraQuat TAM 15 DES is used in some flocculant systems to provide a higher charge when the target for removal is anionic.
SierraQuat TAM 2 DES
SierraQuat TAM 2 DES is a highly active quaternary ammonium derivative made from the reaction of tallow amine 2 and diethyl sulfate. The resulting chemical intermediate is a strongly charged surfactant that can be used in detergent formulation, process auxiliary formulation, and as a cationic emulsifier. SierraQuat TAM 2 DES is very common in the formulation of levelling agents for retarding anionic dyes (acid, direct, reactive, milling, and premetallized acid). As a cationic emulsifier, SierraQuat TAM 2 DES is very effective for most systems. The material is more easily dispersed than some cationic surfactants but still will need adequate mixing and is more readily dispersed into warm water. SierraQuat TAM 2 DES is used in some flocculant systems to provide a higher charge when the target for removal is anionic.
SierraQuat TAM 20 DES
SierraQuat Tam 20 DES is a highly active quaternary ammonium derivative made from the reaction of tallow amine 20 and diethyl sulfate. The resulting chemical intermediate is a strongly charged surfactant that can be used in detergent formulation, process auxiliary formulation, and as a cationic emulsifier. SierraQuat TAM 20 DES is very common in the formulation of levelling agents for retarding anionic dyes (acid, direct, reactive, milling, and premetallized acids as a cationic emulsifier, SierraQuat TAM 20 DES is very effective for most systems. The material is more easily dispersed than some cationic surfactants but still will need adequate mixing and is more readily dispersed into warm water. SierraQuat TAM 20 DES is used in some flocculant systems to provide a higher charge when the target for removal is anionic.
SierraSoap AO
SierraSoap AO is the ammonium salt derived from oleic acid, functioning effectively as a surfactant and emulsifier in industrial and cosmetic formulations. It reduces surface tension and promotes stable oil-in-water dispersions, making it suitable for use in detergents, personal care, textile, coatings, and cleaning applications. Its stability under standard handling conditions, combined with predictable emulsifying performance, positions it as a versatile and reliable ingredient in both industrial and consumer facing products.
SierraSoap AS
SierraSoap AS is the first in a group of Ammonium Stearate products produced by Ascent. Most often used in textile formulations, SierraSoap AS provides the desired color stability and foam properties necessary to achieve the high-quality fabric coating and treatments demanded by the textile industry. SierraSoap AS contains excess ammonia beyond that required in the product reaction. Ascent produces Ammonium Stearate products with much lower levels of excess NH3 for those who need this feature.
SierraSoap KC
SierraSoap KC is rich in medium-chain fatty acids, primarily lauric acid (C12), myristic acid (C14), and capric acid (C10), which contribute to its excellent foaming, cleansing, and emulsifying properties. Coconut Soap is widely used in personal care, household cleaning, and industrial applications, offering biodegradability and mild cleansing.
SierraSoap KL
SierraSoap KL acts as an anionic surfactant and soap, known for excellent foaming, cleansing, emulsifying, and dispersing properties. Due to its mildness and biodegradability, it is widely utilized in personal care products such as liquid soaps, shampoos, and body washes. Additionally, it finds applications in industrial cleaning formulations and as an emulsifier in various aqueous systems.
SierraSoap KO
SierraSoap KO is an anionic soap used as an emulsifying agent and as a lubricant. SierraSoap KO is widely used to emulsify insecticides and herbicides as an earth friendly replacement for synthetic chemistries. SierraSoap KO is used in textiles as a soap to remove excess dye. SierraSoap KO can also be used as an emulsifier in conjunction with wetting agents to prepare fabric for dyeing by removing oils, waxes, and finish. In leather treatment, SierraSoap KO is used to emulsify oils and to condition leather. SierraSoap KO is used as leather cleaners and conditioners to clean and condition leathers simultaneously. SierraSoap KO is used as a lubricant, mold release, and drawing compound. In formulation of lubricants and process chemicals, SierraSoap KO can be used to emulsify oils and eliminating the need for synthetic emulsifiers.
SierraSulf 2-EH NA 40
SierrSulf 2 EH-NA 40 is an anionic surfactant that is an effective low foaming penetrant that aids in wetting of fabrics, or particles in an emulsion or dispersion. It is highly caustic stable and compatible in most nonionic and anionic systems. Generally, it is incompatible in most strongly cationic systems. SierraSulf 2 EH-NA 40 is easily rinsed without leaving residue.
SierraSulf 2-EH NA 60
SierrSulf 2 EH-NA 60 is an anionic surfactant that is an effective low foaming penetrant that aids in wetting of fabrics, or particles in an emulsion or dispersion. It is highly caustic stable and compatible in most nonionic and anionic systems. Generally, it is incompatible in most strongly cationic systems. SierraSulf 2 EH-NA 60 is easily rinsed without leaving residue.
SierraSulf 2-EH NH
Sulfated 2-Ethylhexanol (NH) is an ammonium-neutralized, sulfate-based surfactant derived from 2-ethylhexanol. Its balanced composition provides excellent wetting, emulsifying, and foaming properties, making it a versatile ingredient for industrial cleaners, textile processing aids, and select oilfield applications. With good stability and compatibility across a range of pH levels, this
SierraSulf ALES
SierraSulf ALES is a surfactant commonly used in personal care products such as shampoos and body washes for its effective cleansing and foaming properties. It is an ammonium salt of ethoxylated lauryl sulfate, containing polyethylene glycol (PEG) in its structure. While ALES is generally considered safe for use in rinse-off products, it may cause skin or eye irritation in some individuals, especially at higher concentrations.
SierraSulf ALS 30
SierraSulf ALS 30 is Ammonium Lauryl Sulfate an ammonium salt of ethoxylated laurel alcohol. SierraSulf ALS 30 is suitable for a wide range of applications, such as frothing latex compounds for carpet and textile applications, shampoos, body wash, industrial cleaners and many other applications requiring high foaming properties. SierraSulf ALS 30 contains low levels of salts and of free fatty alcohol and contains no hazardous ingredients. SierraSulf ALS 30is considered by some cosmetic formulators to be a product of choice because it is a very large molecule. It is concluded by some that the larger molecule is more difficult to penetrate the skin. Following that logic, it is further concluded that the material is easily rinsed and therefore less likely to irritate skin.
SierraSulf ALS 70%
SierraSulf ALS 70% is Ammonium Lauryl Sulfate an ammonium salt of ethoxylated laurel alcohol. SierraSulf ALS 70% is suitable for a wide range of applications, such as frothing latex compounds for carpet and textile applications, shampoos, body wash, industrial cleaners and many other applications requiring high foaming properties. SierraSulf ALS 70% contains low levels of salts and of free fatty alcohol and contains no hazardous ingredients. SierraSulf ALS 70% is considered by some cosmetic formulators to be a product of choice because it is a very large molecule. It is concluded by some that the larger molecule is more difficult to penetrate the skin. Following that logic, it is further concluded that the material is easily rinsed and therefore less likely to irritate skin.
SierraSulf CO
SierraSulf CO (Canola Oil) is an extract of rapeseed, a flowering plant grown primarily in Canada and widely used as a cooking oil. SierraSulf CO is a water dispersible surfactant that can be used for several important applications. It is an excellent lubricant, emollient, emulsifier, and can be used in personal care applications as well as a variety of industrial applications. Like other sulfated natural oils, SierraSulf CO is considered green chemistry by most measures and standards. It is renewable and non-VOC.
SierraSulf DDBSA 40
SierraSulf DDBSA 40 is an aqueous solution of the sodium salt of linear DDBSA (Sodium-Dodecylbenzene sulfonate). SierraSulf DDBSA 40 is an anionic surfactant with a wide variety of uses. It is a high foaming detergent that can be used in formulating car wash chemicals, HI&I cleaners and various other cleaning and foaming applications.
SierraSulf Neodol 25-3
SierraSulf Neodol 25-3 is a high-performance anionic surfactant based on sulfated ethoxylated lauryl alcohol, neutralized with ammonium and supplied as a water-extended solution. Its balanced molecular structure offers excellent foaming, detergency, and emulsification, making it ideal for use in personal care, textile auxiliaries, and industrial cleaners. The aqueous form ensures ease of formulation, good solubility, and cost-effective processing.
SierraSulf Nonoxynol 4 NH
SierraSulf Nonoxynol 4 NH is a sulfate-based anionic surfactant derived from Nonoxynol-4. It is commonly used in industrial and household cleaning products, textile processing, and agricultural formulations due to its excellent wetting, foaming, and emulsifying properties.
SierraSulf OA 55
SierraSulf OA 55 is a unique surfactant made from natural ingredients. SierraSulf OA 55 is a powerful dispersant, wetting surfactant, low foaming emulsifier, and a surface-active cleaner. SierraSulf OA 55 can be used as a stand-alone chemistry or can be used as functional ingredient in a variety of specialty chemicals used in textiles, water treatment, cleaning compounds, latex systems, and in lubricants. SierraSulf OA 55 is readily biodegradable, contains no hazardous ingredients, and does not present any environmental concerns.
SierraSulf OA 80
SierraSulf OA 80 is an aqueous solution of sulfated oleic acid. It is an anionic surface-active agent which provides effective dispersing and emulsifying performance for oils, waxes, fats, dyes and pigments. It is commonly used in textile operations as a leveler and to emulsify fatty lubricants. It is often used as a component of general-purpose hard surface cleaners.
SierraSulf SBO 65
SierraSulf SBO 65 is an aqueous solution of sulfated butyl oleate. This unique surfactant is especially useful in textiles as a dispersing and emulsifying agent for oils, waxes, fats, and pigments. It is an excellent re-wetter and lubricant effective in sanforization (pre shrinking) of cotton fabrics. The lubricating action allows improved stretching and shrinkage of woven fabrics. The excellent re-wetting properties & detergency pre-dispose the fabric to simple and fast preparation or finishing. SierraSulf SBO 65 is an effective levelling agent and lubricant in dye processes with direct, reactive, disperse and acid dyes. In non-textile applications SierraSulf SBO 65 can be used in paints as a wetting agent and dispersant. SierraSulf SBO 65 is a formulary ingredient used in surface cleaners as a bio-based surfactant & detergent.
SierraSulf SCO 50
SierraSulf SCO 50 is manufactured using Ascent Chemical’s exclusive sulfation process. Castor oil is a consistent and all-natural chemical feedstock and the Ascent technique of sulfation across the double bonds is a time proven process. The resulting surfactant is a highly versatile, green chemistry, surfactant with numerous industrial uses and formulation possibilities.
SierraSulf SCO 70
SierraSulf SCO 70 is manufactured using Ascent Chemical’s exclusive sulfation process. Castor oil is a consistent and all-natural chemical feedstock and the Ascent technique of sulfation across the double bonds is a time proven process. The resulting surfactant is a highly versatile, green chemistry, surfactant with numerous industrial uses and formulation possibilities.
SierraSulf SCO 75
SierraSulf SCO 75 is manufactured using Ascent Chemical’s exclusive sulfation process. Castor oil is a consistent and all-natural chemical feedstock and the Ascent technique of sulfation across the double bonds is a time proven process. The resulting surfactant is a highly versatile, green chemistry, surfactant with numerous industrial uses and formulation possibilities.
SierraSulf SCO 80
SierraSulf SCO 80 is manufactured using Ascent Chemical’s exclusive sulfation process. Castor oil is a consistent and all-natural chemical feedstock and the Ascent technique of sulfation across the double bonds is a time proven process. The resulting surfactant is a highly versatile, green chemistry, surfactant with numerous industrial uses and formulation possibilities.
SierraSulf SCO R-75
SierraSulf SCO R-75 is manufactured using Ascent Chemical’s exclusive sulfation process. Castor oil is a consistent and all-natural chemical feedstock and the Ascent technique of sulfation across the double bonds is a time proven process. The resulting surfactant is a highly versatile, green chemistry, surfactant with numerous industrial uses and formulation possibilities.
SierraSulf SMO
SierraSulf SMO is a unique surfactant that is especially useful in latex coating and film applications. In glove manufacturing, SierraSulf SMO improves the manufacturing process in several ways: first of all, SierraSulf SMO is an excellent dispersant and stabilizer for latex. Then, SierraSulf SMO makes the latex application more uniform by maximizing film thickness uniformity when gloves are dipped. And, SierraSulf SMO aids in giving the latex compound a slight wetting effect that penetrates the surface of glove fabric. The wetting effect eliminates blisters and gives a stronger bond onto the glove. When optimized, the system will usually allow a lower add on of latex that translates into cost savings.
SierraSulf T 35
SierraSulf T 35 is a lubricant and process aid made from tallow. Once diluted, SierraSulf T 35 can be used as a lubricant, process aid, bead wire lubricant, and metal forming process aid. SierraSulf T 35 is semi solid at room temperature but can be easily let down into warm water with mild agitation.
SierraSulf T 70
SierraSulf T 70 is a lubricant and process aid made from tallow. Once diluted, SierraSulf T 70 can be used as a lubricant, process aid, bead wire lubricant, and metal forming process aid. SierraSulf T 70 is semi solid at room temperature but can be easily let down into warm water with mild agitation.
SierraSulf T 80
SierraSulf T 80 is a lubricant and process aid made from tallow. Once diluted, SierraSulf T 80 can be used as a lubricant, process aid, bead wire lubricant, and metal forming process aid. SierraSulf T 80 is semi solid at room temperature but can be easily let down into warm water with mild agitation.
SierraSulf TO
SierraSulf TO (Sulfated Tall Oil) is a versatile, bio-based anionic surfactant with applications across multiple industrial sectors. SierraSulf TO is made from Ascent’s unique sulfation process using sulfuric acid to react across the double bonds. Tall oil fatty acid (TOFA) is not soluble in water but after sulfation becomes water soluble / dispersible. Its unique combination of emulsification and dispersing properties makes it a valuable ingredient.
SierraSurf 200 DL
SierraSurf 200 DL is a polyether compound that is used in a wide variety of applications as an active ingredient or formulation additive. Because of its low toxicity it can be used in areas where many other products cannot be used. SierraSurf 200 DL can be used in lubricants, metal working fluids, as an emulsifier in chemical formulation, and as a cleaning additive.
SierraSurf 200 ML
SierraSurf 200 ML is a widely used raw material for formulation of lubricants for fiber processing, textile processing, and metalworking. It is useful as an emulsifier (HLB approximately 8), and as an emollient. It is useful in chemical specialty formulation because of its broad compatibility, low cost, and various properties. SierraSurf 200 ML is biodegradable.
SierraSurf 200 MO
SierraSurf 200 MO is a nonionic surfactant made from the reaction of PEG 200 with Oleic Acid. The resulting ester is a versatile surfactant that can be used as an emulsifier, lubricant, and emollient. SierraSurf 200 MO is anhydrous, soluble in most oils, and is less hazardous for human contact and environmentally than other types of nonionic surfactants.
SierraSurf 300 MO
SierraSurf 300 MO is a nonionic surfactant made from the reaction of PEG 300 with Oleic Acid. The resulting ester is a versatile surfactant that can be used as an emulsifier, lubricant, and emollient. SierraSurf 300 MO has an HLB of approximately 8, is anhydrous, soluble in most oils, and is less hazardous for human contact and environmentally than other types of nonionic surfactants.
SierraSurf 300 PEL
SierraSurf 300 PEL is a concentrated nonionic fiber processing aid for use on synthetic fiber blends requiring high fiber to metal lubricity and high fiber to fiber cohesion to assure good processing on the woolen or modified worsted system. The product is all fatty in nature and forms clear solutions when mixed with water. These solutions are easy to spray and offer good anti-static protection.
SierraSurf 400 DL
SierraSurf 400 DL is a polyether compound that is used in a wide variety of applications as an active ingredient or formulation additive. Because of its low toxicity it can be used in areas where many other products cannot be used. SierraSurf 400 DL can be used in lubricants, metal working fluids, as an emulsifier in chemical formulation, and as a cleaning additive.
SierraSurf 400 DO
SierraSurf 400 DO is a nonionic surfactant that is produced by reacting oleic acid with polyethylene glycol. It is considered to be readily biodegradable and safer than most other nonionic surfactants for the environment and for human contact. SierraSurf 400 DO also has a high renewable content. SierraSurf 400 DO has a few attributes sought after by formulators, such as low foaming, good emulsification properties, high lubricity, and good surface filming. These coupled with the environmental profile, renewable content, and economy make it a useful additive in a few types of formulations. SierraSurf 400 DO has a HLB of approximately 9.
SierraSurf 400 DT
SierraSurf 400 DT is a nonionic surfactant and emulsifier that is compatible with nonionic, anionic, amphoteric, and cationic surfactants. It is especially useful as an emulsifier for oils and particularly mineral oil. Because of its efficiency it is a product of choice to use as a spreading agent and emulsifier for defoamers. It can also be effective in lubricant formulations where non-water-soluble oils are added and need emulsification. The lubricating properties of SierraSurf 400 DT allow it to serve a dual function in lubricant formulation. In fiber lubricant formulation, SierraSurf 400 DT is compatible with cationic cohesion aids and antistats.
SierraSurf 400 ML
SierraSurf 400 ML is a widely used raw material for formulation of lubricants for fiber processing, textile processing, and metalworking. It is useful as an emulsifier (HLB 13), and as an emollient. It is useful in chemical specialty formulation because of its broad compatibility, low cost, and various properties. SierraSurf 400 ML is biodegradable.
SierraSurf 400 MO
SierraSurf 400 MO is a nonionic surfactant made from the reaction of PEG 400 with Vegetable based Oleic Acid. The resulting ester is a versatile surfactant that can be used as an emulsifier, lubricant, and emollient. SierraSurf 400 MO has an HLB of 12, is anhydrous, soluble in most oils, and is less hazardous for human contact and environmentally than other types of nonionic surfactants.
SierraSurf 400 MT
SierraSurf 400 MT is made from the reaction of polyethylene glycol with tall oil fatty acid. The resulting ester offers excellent emulsifying properties that are well known to be effective in emulsifying mineral oil and others in the mineral oil family. SierraSurf 400 MT is an extremely effective spreading agent and emulsifier for high performance defoamers and antifoams. SierraSurf 400 MT can be used to emulsify many water insoluble chemicals and therefore is found in a number of different types of chemical formulations.
SierraSurf 400 PEL
SierraSurf 400 PEL is a concentrated nonionic fiber processing aid for use on synthetic fiber blends requiring high fiber to metal lubricity and high fiber to fiber cohesion to assure good processing on the woolen or modified worsted system. The product is all fatty in nature and forms clear solutions when mixed with water. These solutions are easy to spray and offer good anti-static protection.
SierraSurf 600 DO
SierraSurf 600 DO is a nonionic surfactant that is produced by reacting oleic acid with polyethylene glycol. It is readily biodegradable and safer than most other nonionic surfactants for the environment and for human contact. SierraSurf 600 DO also has a high renewable content. SierraSurf 600 DO has a few attributes sought after by formulators, such as low foaming, good emulsification properties, high lubricity, and good surface filming. These coupled with the environmental profile, renewable content, and economy make it a useful additive in a few types of formulations.
SierraSurf 600 DT
SierraSurf 600 DT is a nonionic surfactant and emulsifier that is compatible with nonionic, anionic, amphoteric, and cationic surfactants. It is especially useful as an emulsifier for oils and particularly mineral oil. Because of its efficiency it is a product of choice to use as a spreading agent and emulsifier for defoamers. It can also be effective in lubricant formulations where non-water-soluble oils are added and need emulsification. The lubricating properties of SierraSurf 600 DT allow it to serve a dual function in lubricant formulation. In fiber lubricant formulation, SierraSurf 600 DT is compatible with cationic cohesion aids and antistats.
SierraSurf 600 ML
SierraSurf 600 ML is a widely used raw material for formulation of lubricants for fiber processing, textile processing, and metalworking. It is useful as an emulsifier , and as an emollient. It is useful in chemical specialty formulation because of its broad compatibility, low cost, and various properties. SierraSurf 600 ML is biodegradable.
SierraSurf 600 MO
SierraSurf 600 MO is a nonionic surfactant made from the reaction of PEG 600 with Oleic Acid. The resulting ester is a versatile surfactant that can be used as an emulsifier, lubricant, and emollient. SierraSurf 600 MO has an HLB of 14.6, is anhydrous, soluble in most oils, and is less hazardous for human contact and environmentally than other types of nonionic surfactants.
SierraSurf CAPB 30
SierraSurf CAPB 30 is a surfactant derived from fatty acid materials derived from coconut oil reacted with dimethylaminopropylamine. SierraSurf CAPB 30 has many uses in shampoos and body wash as a foaming soap, in industrial applications as a primary foaming agent or as a foam booster and flash foamer for other surfactants. SierraSurf CAPB 30 is used in oil and gas as a foamer, and in carwash soaps as a detergent and foaming agent. In cosmetics and personal care, SierraSurf CAPB 30 is considered mild to the skin, highly effective for cleansing, and economical to use. SierraSurf CAPB 30 exhibits moderately high resistance to water hardness and brine making it a chemistry of choice in adverse water conditions. SierraSurf CAPB 30 is rewetting in textile applications and so should be used in applications where rewetting is desirable or can be tolerated.
SierraSurf CAPB 35
SierraSurf CAPB 35 is a surfactant derived from fatty acid materials derived from coconut oil reacted with dimethylaminopropylamine. SierraSurf CAPB 35 has many uses in shampoos and body wash as a foaming soap, in industrial applications as a primary foaming agent or as a foam booster and flash foamer for other surfactants. SierraSurf CAPB 35 is used in oil and gas as a foamer, and in carwash soaps as a detergent and foaming agent. In cosmetics and personal care, SierraSurf CAPB 35 is considered mild to the skin, highly effective for cleansing, and economical to use. SierraSurf CAPB 35 exhibits moderately high resistance to water hardness and brine making it a chemistry of choice in adverse water conditions. SierraSurf CAPB 35 is rewetting in textile applications and so should be used in applications where rewetting is desirable or can be tolerated.
SierraSurf DLSS 30+
SierraSurf™ DLSS 30+ is a very mild, low-color anionic surfactant derived from an ethoxylated lauryl alcohol sulfosuccinate with a narrower (UVCB) ethoxylation distribution, offering effective wetting, emulsification, and stabilization across a range of aqueous systems. It is well suited for use in latex emulsion polymerization for paints, coatings, adhesives, and related formulations, while also delivering excellent foaming performance in personal care and HI&I applications. When blended with Sodium Laureth Sulfate (SLES), SierraSurf DLSS 30+ enhances foam volume, foam stability, and viscosity response, supporting formulations that balance strong performance with mildness to skin and eye.
SierraSurf DLSS 30
SierraSurf™ DLSS 30 is a very mild, low-color anionic surfactant derived from an ethoxylated lauryl alcohol sulfosuccinate with a broader (UVCB) ethoxylation distribution, offering effective wetting, emulsification, and stabilization across a range of aqueous systems. It is well suited for use in latex emulsion polymerization for paints, coatings, adhesives, and related formulations, while also delivering excellent foaming performance in personal care and HI&I applications. When blended with Sodium Laureth Sulfate (SLES), SierraSurf DLSS 30 enhances foam volume, foam stability, and viscosity response, supporting formulations that balance strong performance with mildness to skin and eye.
SierraSurf DOSI A 18
SierraSurf DOSI A 18 is high quality surfactant, properly called n-octadecyl disodium sulfosuccinate. The product finds use in numerous applications, particularly those requiring excellent stability of foams, in both mechanical and heat extremes. The product is the original “backbone” surfactant for non-gel latex foams due to its excellent bubble stability. Numerous foam formulations are improved with the addition of SierraSurf DOSI A 18. The addition of SierraSurf DOSI A 18 helps stabilize latex compounds which are to be foamed.
SierraSurf DOSS 70 DEG
Sierra Surf DOSS 70 DEG Special is a powerful, versatile, and economical wetting and foaming surfactant used in a wide variety of industrial applications. It is considered to be one of the fastest wetting agents and is an effective penetrant when used in household and industrial cleaners. The 70 DEG version uses DEG as the diluent to raise the flash point and eliminate flammability concerns. DEG diluent also makes the product easy to disperse into cold water. In Textile application, SierraSurf DOSS 70 DEG is a powerful wetter & re-wetting agent for cotton and blends.
SierraSurf DOSS 70 E+
SierraSurf DOSS 70 E+ is an anionic surfactant based on dioctyl sodium sulfosuccinate. The product is an extremely effective wetting and re-wetting agent and is designed for use in low concentrations. SierraSurf DOSS 70 E+ is most effective when used in a nearly neutral or acid bath. The presence of alkalinity in the range of 1% caustic renders the product ineffective.
SierraSurf DOSS 70 E
SierraSurf DOSS 70 E is an anionic surfactant based on dioctyl sodium sulfosuccinate. The product is an extremely effective wetting and re-wetting agent and is designed for use in low concentrations. SierraSurf DOSS 70 E is most effective when used in a nearly neutral or acid bath. The presence of alkalinity in the range of 1% caustic renders the product ineffective.
SierraSurf DOSS 70 E+ NRYN
SierraSurf DOSS 70 E+ NRYN is an anionic surfactant based on dioctyl sodium sulfosuccinate. The product is an extremely effective wetting and re-wetting agent and is designed for use in low concentrations. SierraSurf DOSS 70 E+ NRYN is most effective when used in a nearly neutral or acid bath. The presence of alkalinity in the range of 1% caustic renders the product ineffective.
SierraSurf DOSS 70 IPA
SierraSurf DOSS 70 IPA is an anionic surfactant based on dioctyl sodium sulfosuccinate with diethylene glycol and IPA as the solvent & diluent. SierraSurf DOSS 70 IPA is a highly effective wetting and re-wetting agent in all types of textile process. It is effective in very low concentrations and therefore extremely economical to use. SierraSurf DOSS 70 IPA is effective over a broad pH range - 1.8 to 9.5 (rendered ineffective in the presence of 1% caustic). The properties of SierraSurf DOSS 70 IPA make it an economical choice for cleaning formulations for metal and glass. SierraSurf DOSS 70 IPA has been used effectively as an agriculture adjuvant to penetrate foliage when treating crops.
SierraSurf DOSS 70 MS
SierraSurf DOSS 70 MS is an anionic surfactant supplied as a 70 % active solution of dioctyl sodium sulfosuccinate in mineral Spirits. It offers rapid wetting, spreading, and detergency, and is widely used as a high-efficiency emulsifier, wetting agent, and dispersant. The product provides excellent surface tension reduction and compatibility across aqueous and solvent-borne systems.
SierraSurf DOSS 70 N
SierraSurf DOSS 70 N is a powerful, versatile, and economical wetting and foaming surfactant used in a wide variety of industrial applications. It is considered to be one of the fastest wetting agents and is an effective penetrant when used in household and industrial cleaners. The 70 N version uses PEG 600 as the diluent to raise the flash point and eliminate flammability concerns. PEG 600 diluent also makes the product easy to disperse into cold water. In Textile application, DOSS 70 N is a powerful wetter & re-wetting agent for cotton and blends.
SierraSurf DOSS 70 PG
SierraSurf Doss 70 PG is an anionic surfactant based on dioctyl sodium sulfosuccinate with propylene glycol as a solvent & diluent. It is a highly effective wetting and re-wetting agent in all types of textile processes. SierraSurf Doss 70 PG is effective in very low concentrations and therefore extremely economical to use. It is effective over a broad pH range - 1.8 to 9.5 (rendered ineffective in the presence of 1% caustic). The properties make it an economical choice for cleaning formulations for metal and glass. SierraSurf Doss 70 PG has been used effectively as an agriculture adjuvant to penetrate foliage when treating crops.
SierraSurf DOSS 70 PG+
SierraSurf Doss 70 PG+ is an anionic surfactant based on dioctyl sodium sulfosuccinate with propylene glycol as a solvent & diluent. It is a highly effective wetting and re-wetting agent in all types of textile processes. SierraSurf Doss 70 PG+ is effective in very low concentrations and therefore extremely economical to use. It is effective over a broad pH range - 1.8 to 9.5 (rendered ineffective in the presence of 1% caustic). The properties make it an economical choice for cleaning formulations for metal and glass. SierraSurf Doss 70 PG+ has been used effectively as an agriculture adjuvant to penetrate foliage when treating crops.
SierraSurf DOSS 75 E
SierraSurf DOSS 75 E is an anionic surfactant based on dioctyl sodium sulfosuccinate. The product is an extremely effective wetting and re-wetting agent and is designed for use in low concentrations. SierraSurf DOSS 75 E is most effective when used in a nearly neutral or acid bath. The presence of alkalinity in the range of 1% caustic renders the product ineffective.
SierraSurf DOSS 75 E+
SierraSurf DOSS 75 E+ is an anionic surfactant based on dioctyl sodium sulfosuccinate. The product is an extremely effective wetting and re-wetting agent and is designed for use in low concentrations. SierraSurf DOSS 75 E+ is most effective when used in a nearly neutral or acid bath. The presence of alkalinity in the range of 1% caustic renders the product ineffective.
SierraSurf DOSS 75 PG
SierraSurf Doss 75 PG is an anionic surfactant based on dioctyl sodium sulfosuccinate with propylene glycol as a solvent & diluent. It is a highly effective wetting and re-wetting agent in all types of textile processes. SierraSurf Doss 75 PG is effective in very low concentrations and therefore extremely economical to use. It is effective over a broad pH range - 1.8 to 9.5 (rendered ineffective in the presence of 1% caustic). The properties make it an economical choice for cleaning formulations for metal and glass. SierraSurf Doss 75 PG has been used effectively as an agriculture adjuvant to penetrate foliage when treating crops.
SierraSurf DOSS 75 PG+ LA
SierraSurf Doss 75 PG+ LA is an anionic surfactant based on dioctyl sodium sulfosuccinate with propylene glycol as a solvent & diluent. It is a highly effective wetting and re-wetting agent in all types of textile processes. SierraSurf Doss 75 PG+ LA is effective in very low concentrations and therefore extremely economical to use. It is effective over a broad pH range - 1.8 to 9.5 (rendered ineffective in the presence of 1% caustic). The properties make it an economical choice for cleaning formulations for metal and glass. SierraSurf Doss 75 PG has been used effectively as an agriculture adjuvant to penetrate foliage when treating crops.
SierraSurf EGDS
SierraSurf EGDS is a mild, sulfate-free opacifier that imparts a refined pearlescent appearance to finished formulations. It enhances the aesthetic quality of shampoos, body washes, and liquid soaps while maintaining excellent skin compatibility. The material is ideal for creating rich, visually appealing personal-care products with a smooth, luxurious look and feel.
EtnaFoam 41B
EtnaFoam 41B is a filled silicone defoamer compound based on a mid-range viscosity Dimethyl silicone Fluid. The Silica is hydrophobized in a catalyzed reaction. EtnaFoam 41B is an effective defoamer when emulsified and introduced into aqueous systems. EtnaFoam 41B can be used as a base material to make more dilute products for general use. When formulating with 41B it is important to blend it properly into a pre-thickened solution with low shear with proper re-adjustment to the proper level of biocide to prevent bacteria.
EtnaFoam 41M-EM
EtnaFoam 41M-EM is 100% active silicone compound with a built-in emulsifier package. This 100% active silicone defoamer leverages silicone's superior foam control properties, providing long-lasting performance in industrial applications. The built-in emulsifier package ensures efficient dispersion and stability, allowing the silicone to spread effectively in both aqueous and non-aqueous systems for optimal defoaming action.
EtnaFoam 700 N
EtnaFoam 700 N is a 100% active, non-silicone antifoaming agent composed of EBSA in naphthenic oil. Versatile and economical, it serves as a base for custom defoamers or as a direct solution for brown stock defoaming in paper manufacturing. Ideal for systems where silicone antifoams fall short or unsuitable, its low surface activity and lack of emulsifiers minimize process interference while ensuring reliable foam control. EntaFoam 700 N is compliant with FDA regulations for indirect food contact, providing reliable performance for regulated industries.
EtnaFoam 700 S
EtnaFaom 700 S is a 100% active, non-silicone antifoaming agent composed of EBSA in paraffinic oil. Versatile and economical, it serves as a base for custom defoamers or as a direct solution for brown stock defoaming in paper manufacturing. Ideal for systems where silicone antifoams fall short or unsuitable, its low surface activity and lack of emulsifiers minimize process interference while ensuring reliable foam control. EtnaFoam 700 S is compliant with FDA regulations for indirect food contact, providing reliable performance for regulated industries.
EtnaFoam EBSA
EtnaFoam EBSA is a 100% active ethylene bis stearamide available in approximately 15 pound ingots for use as a component in formulating non-silicone defoamers in mineral oil suspension. The product is readily soluble in all forms of mineral oil, including paraffinic, naphthenic and low boiling cuts such as mineral spirits and mineral seal oil. The product forms clear solutions in these oils at temperatures above 110°C, then begins to titer or flake out at lower temperatures. Typical ranges of concentration for EBSA 100 in oil are 1 to 10%, with the lower levels being used in textile applications and the higher levels being used in paper applications.
EtnaFoam FA 2056
EtnaFoam FA 2056 is an effective 100% active defoamer and antifoam based on fatty alcohols, fatty acids, surfactants, paraffinic oil, and hydrophobized silica. The material can be used in a variety of applications where silicone is not acceptable. Etna Foam FA 2056 can be added directly to most liquid mediums to defoam with a persistent effect that prevents foam from recurring. EtnaFoam FA 2056 does not contain any reportable hazardous ingredients.
EtnaFoam FA 4580
EtnaFoam FA 4580 is an economical antifoam that is 100% non-silicone. EtnaFoam FA 4580 can be used in a broad range of applications such as paper manufacturing, textiles, waste treatment, and chemical manufacturing. EtnaFoam FA 4580 is effective against foam caused by typical process surfactants and foams from process water. In textile application EtnaFoam FA 4580 is effective in several types of equipment and is resistant to shear. EtnaFoam FA 4580 can be easily rinsed from textile fabrics.
EtnaFoam FA 6271
EtnaFoam FA 6271 is blend of mineral oil, fatty ester, and specialized defoaming agents designed to control and eliminate foam in a wide range of aqueous and non-aqueous systems. The balanced formulation provides rapid foam knockdown and sustained suppression without destabilizing the base formulation.
EtnaFoam HS N
EtnaFoam HS N is a 100% active non-silicone defoamer base made of naphthenic oil with a high concentration of hydrophobized silica. It can be used as supplied in many cases, but it is formulated without emulsifiers or surfactants to help spreading and has a low surface activity. EtnaFoam HS N is used by formulators as a defoamer base and typically will have other components added such as spreading agents and emulsifiers to increase the performance.
EtnaFoam HS P
EtnaFoam HS P is a 100% active non-silicone defoamer base made of Paraffinic oil with a high concentration of hydrophobized silica. It can be used as supplied in many cases, or it can be modified by adding spreading agents and emulsifiers to tailor to special applications.
EtnaFoam KI
EtnaFoam KI is a 100% active silicone filled with hydrophobized silica. It is used primarily as a base material for formulators but can be used as supplied in certain applications. The hydrophobized silica is often used in combination with silicone to enhance performance in emulsions. Similarly, where straight silicones are used for defoaming the addition of silica typically offers an improved performance that will vary accordingly. In formulation, EtnaFoam KI is sometimes used to manufacture emulsions.
EtnaFoam OB +
EtnaFoam OB + is a high efficiency defoamer formulated with three-dimensional siloxane. EtnaFoam OB + is ideal for metalworking lubricants and fluids. Because EtnaFoam OB+ is formulated into a polyalkylene carrier it offers added versatility applicable to semi-synthetic metalworking fluids, antifreeze coolants, glycol hydraulics, and commercial cleaners.
EtnaFoam OB-ECO+
EtnaFoam OB-ECO+ is a non-silicone defoamer that uses vegetable oil to replace traditional hydrocarbons. The resulting defoamer has several environmental benefits versus mineral oil-based products which include higher degradability, lower VOC, reduced health and safety concerns, and a much higher renewable content. In addition, the flash point of Defoamer OB-ECO+ is higher than most hydrocarbon-based products. The vegetable oil base is made from feedstocks derived from annually renewable materials and these have historically been very stable in pricing compared to oil derivatives. EtnaFoam OB-ECO+ works well in most applications where traditional non-silicone defoamers are used without modification to usage levels or procedures.
EtnaFoam OB-ECO
EtnaFoam OB-ECO is a new type of antifoam that is formulated by replacing synthetic chemicals and oils with 100% natural and renewable ingredients. The product is non-silicone containing and is effective in a broad range of foam control applications. EtnaFoam OB-ECO is especially effective in application where there is high shear or extremes in pH. EtnaFoam OB-ECO has similar performance properties to mineral seal oil naphthenic oil products with hydrophobized silica. The oil portion of the formulation uses blended vegetable oil and contains silica (sand) which is also a natural ingredient. EntaFoam OB-ECO has demonstrated excellent performance in textile applications when compared to other non-silicone materials in withstanding high shear. In other applications where non-silicone antifoams are used EntaFoam OB-ECO has been found to be highly compatible and effective. Compared to silicone it generally requires more EtnaFoam OB-ECO.
EtnaFoam OB-N 100
EtnaFoam OB-N 100 is a 100% active, non-silicone antifoaming agent that is applicable to textile and associated processing. EtnaFoam OB-N 100 was designed as an economical replacement where the use of silicone antifoaming agents is objectionable. The product contains twice the active EBSA and can typically be used at half the level to reduce oil content in the bath. The selection and proper balance of emulsifiers provides stability of this product over the entire temperature range normally employed in the dyeing of both natural and synthetic fibers. The addition of 1/8 - 1/4% based upon the weight of goods, is generally sufficient to eliminate troublesome foam. As in all antifoaming agents, care should be taken to avoid excessive levels to eliminate possible dyeing problems.
EtnaFoam OB-N 200
EtnaFoam OB-N 200 is a 100% active, non-silicone anti-foaming agent that is applicable to textile and associated processing. EtnaFoam OB-N 200 was designed as an economical replacement where the use of silicone anti-foaming agents is objectionable. The product contains twice the active amount of EBSA and can typically be used at half the level to reduce oil content in the bath.The selection and proper balance of emulsifiers provides stability of this product over the entire temperature range normally employed in the dyeing of both natural and synthetic fibers. The addition of 1/8 - 1/4% based upon the weight of goods, is generally sufficient to eliminate troublesome foam. As in all anti-foaming agents, care should be taken to avoid excessive levels to eliminate possible dyeing problems.
EtnaFoam OB-N 300
EtnaFoam OB-N 300 is a 100% active, non-silicone anti-foaming agent that is applicable to textile and associated processing. EtnaFoam OB-N 300 was designed as an economical replacement where the use of silicone anti-foaming agents is objectionable. The product contains twice the active amount of EBSA and can typically be used at half the level to reduce oil content in the bath.The selection and proper balance of emulsifiers provides stability of this product over the entire temperature range normally employed in the dyeing of both natural and synthetic fibers. The addition of 1/8 - 1/4% based upon the weight of goods, is generally sufficient to eliminate troublesome foam. As in all anti-foaming agents, care should be taken to avoid excessive levels to eliminate possible dyeing problems.
EtnaFoam OB-N WE
EtnaFoam OB-N WE is a non-silicone oil based defoamer extended to an economical user strength. Its performance is bolstered by the addition of both hydrophobized silica and EBSA. The product is used in a broad range of applications and is especially indicated where dosing and addition rates are not highly controlled. EtnaFoam OB-N WE is broadly compatible and because it does not contain silicone it has no issue with buildup or breakout even in high shear applications.
EtnaFoam OB-P 100
EtnaFoam OB-P 100 is a powerful foam control agent that contains hydrophobized silica, EBSA wax, and emulsifying & spreading agents to aid quick introduction of the material throughout the liquid being treated. EtnaFoam OB-P 100 is suitable for a wide range of applications where oil-based antifoams are an acceptable solution to foaming problems. EtnaFoam OB-P 100 can also be used as a formulary intermediate to make water extended oil-based antifoams where concentration, cost, and application techniques call for a more dilute antifoam.
EtnaFoam OB-P FG
EtnaFoam OB-P FG is a non-silicone-containing antifoaming agent that can be used in a variety of foam control applications. EtnaFoam OB-P FG contains a combination of EBSA and hydrophobic silica in a paraffinic oil & surfactant blend. EtnaFoam OB-P FG is engineered to quickly disperse and spread into liquid to increase the effectiveness of the initial foam kill. This is especially helpful in water treatment and other applications with heavy solids or in materials that are slightly viscous.
EtnaFoam PPG 2025
EtnaFoam PPG 2025 is a high-performance defoamer base formulated with hydrophobized silica in a PPG carrier. Designed for versatility, it is suitable for a broad range of industrial applications requiring effective foam suppression. While it can be utilized directly in certain applications, its primary design is to serve as a foundational component in foam control formulations. Incorporating additional agents, such as emulsifiers and surfactants, can enhance its performance across various systems.
EtnaFoam PPG 2025 DT
EtnaFoam PPG 2025 DT is a ditallate ester of polypropylene glycol 2025, offering superior versatility as a non-silicone defoamer base with excellent nonionic water and oil-emulsifying properties in hard and soft water. Its low foaming tendency, coupled with its functionality as a coupling and wetting agent, makes it ideal for metalworking fluids, water-based hydraulic fluids, and industrial cleaners. Additionally, EtnaFoam PPG 2025 DT serves as a highly effective surfactant and dispersant for applications in degreasers. Designed for demanding environments, it ensures stable performance under high shear and extreme conditions, empowering formulators to develop efficient and adaptable solutions for diverse industrial needs.
EtnaFoam PPG 2043
EtnaFoam PPG 2043 is a non-silicone containing antifoaming agent used in specialty applications where typical oil defoamers are not suitable. EtnaFoam PPG 2043 is a unique formulation of silica filled PPG with special emulsifiers and spreading agents. This unique design is especially useful in critical applications such as hydraulic fluid defoaming, inks and colorant defoaming for jet application, and others. In paints and coatings, EtnaFoam PPG 2043 is an excellent choice and especially in materials that will be applied by spray. EtnaFoam PPG 2043 can be added directly to liquid to be treated and blends with only mild stirring. It is free rinsing and will not build up in most applications.
EtnaFoam PPG 820
EtnaFoam PPG 820 is a unique non-silicone antifoam that was formulated as a brown stock defoamer for paper manufacturing. Because of its unique features it has also become a specialty defoamer for a wide range of applications. EtnaFoam PPG 820 has a high renewable content to help companies meet sustainability and renewable content coals. EtnaFoam PPG 820 has an efficient foam knock down upon addition, then has a persistent foam controlling effect in most applications.
EtnaFoam PPG WE
EtnaFoam PPG WE is a versatile, water-extended defoamer formulated with silica in EtnaFoam PPG WE designed for efficient foam control across general-purpose applications. Its advanced composition ensures compatibility with a wide range of systems, offering reliable performance in both aqueous and mixed-phase environments. Approved for general-purpose use, EtnaFoam PPG WE delivers excellent stability and foam suppression, making it an adaptable and cost-effective solution for industrial processes requiring consistent defoaming efficiency.
EtnaFoam SE 10
EtnaFoam SE 10 is an economical industrial silicone emulsion antifoam. 10 refers to the active silicone content in the product with the total active ingredients being somewhat higher. EtnaFoam SE 10 is one of a series of silicone emulsions that are available in different strengths for user preferences and applications (EtnaFoam SE 3, 5, 10, 20 & 30 are standard products). EtnaFoam SE 10 contains a unique blend of silicone emulsion and hydrophobized silica to give a rapid knock down of foam coupled with long-lasting foam control.
EtnaFoam SE 20
EtnaFoam SE 20 is an economical, highly efficient 20% active silicone emulsion effective in low to high pH systems. EtnaFoam SE 20 provides fast knockdown and works in hot or cold aqueous systems. Compliance Highlights Unavailable
EtnaFoam SE 3
EtnaFoam SE 3 is a cost-effective silicone emulsion antifoam with 3% active silicone, providing reliable foam suppression at a lower concentration for reduced dosing. Part of a series available in various strengths (3, 5, 10, 20, and 30), it combines silicone and hydrophobized silica for rapid foam knockdown and moderate long-term control. An economical solution, EtnaFoam SE 3 is ideal for processes requiring effective foam management with minimal silicone content.
EtnaFoam SE 30
EtnaFoam SE 30 is a concentrated silicone emulsion used in systems where the metering and dispensing of concentrated material is tolerated. EtnaFoam SE 30 is made from Ascent’s silicone emulsion base that contains hydrophobized silica and nonionic emulsifiers. It is effective in a broad range of applications and uses. Because it is nonionic it is compatible with most chemical systems. EtnaFoam SE 30 is also used as a base material to formulate weaker user-friendly products.
EtnaFoam SE 5
EtnaFoam SE 5 is a cost-effective silicone emulsion antifoam with 5% active silicone, providing reliable foam suppression at a lower concentration for reduced dosing. Part of a series available in various strengths (3, 5, 10, 20, and 30), it combines silicone and hydrophobized silica for rapid foam knockdown and moderate long-term control. An economical solution, EtnaFoam SE 5 is ideal for processes requiring effective foam management with limited silicone content.
EtnaFoam SE 50
EtnaFoam SE 50 is a concentrated silicone emulsion used in systems where the metering and dispensing of concentrated material is tolerated. EtnaFoam SE 50 is made from Ascent’s silicone emulsion base that contains hydrophobized silica and nonionic emulsifiers. It is effective in a broad range of applications and uses. Because it is nonionic it is compatible with most chemical systems. EtnaFoam SE 50 is also used as a base material to formulate weaker user-friendly products.
EtnaFoam SE-FG 10
EtnaFoam SE-FG 10 is a silicone emulsion that is made with food grade ingredients. It is used for certain applications where nonfood grade materials are of concern. EtnaFoam SE-FG 10 is not suitable for addition to food or in direct contact with food. EntaFoam SE-FG 10 has a powerful defoaming effect for foams from soaps and surfactants. It is moderately effective for long term foam control. EntaFoam SE-FG 10 is easy to rinse completely, has some tolerance for shear and can be pumped through most dispensing systems.
EtnaFoam SE-FG 20
EtnaFoam SE-FG 20 is a concentrated silicone emulsion with food-grade ingredients, approved for indirect food contact applications. It provides powerful defoaming for foams from soaps and surfactants and offers enhanced performance at lower doses compared to EtnaFoam SE-FG 20. Effective for long-term foam control, it is easy to rinse, shear-tolerant, and compatible with most dispensing systems, making it ideal for demanding uses.
EtnaFoam SE-FG 5
EtnaFoam SE-FG 5 is a silicone emulsion that is made with food grade ingredients. It is used for certain applications where nonfood grade materials are of concern. EtnaFoam SE-FG 5 is not suitable for addition to food or in direct contact with food. EntaFoam SE-FG 5 has a powerful defoaming effect for foams from soaps and surfactants. It is moderately effective for long term foam control. EntaFoam SE-FG 5 is easy to rinse completely, has some tolerance for shear and can be pumped through most dispensing systems.
EtnaFoam SE-FR 20
EtnaFoam SE-FR 20 is a free-rinsing, nonionic silicone emulsion designed for textile applications. It excels in beck dyeing, yarn dyeing, space dyeing, and warp printing, delivering efficient foam control while resisting scum formation. A typical starting dosage is ¾ of an ounce per 100 gallons in beck applications, though mills should determine optimal levels for their systems. Highly versatile, EtnaFoam SE-FR 20 is easily dilutable with water, even under shear conditions, ensuring smooth application and consistent performance.
EtnaFoam SE-FR 3
EtnaFoam SE-FR 3 is a free rinsing silicone emulsion that can be used in textiles, metal working, agriculture, and other applications. Free rinsing is an important attribute in textiles where silicone can cause spotting and in metal applications where silicone residue can contribute to finishing problems in certain applications. EtnaFoam SE-FR 3 is economical, stable, and provides consistent results.
EtnaFoam SE-FR 3.5
EtnaFoam SE-FR 3.5 is a highly efficient free-rinsing silicone defoamer designed to be used in Jet-dyeing machines. Its use minimizes spots usually encountered with conventional silicone defoamers. Compliance Highlights Unavailable
EtnaFoam SE-FR 8
EtnaFoam SE-FR 8 is a free-rinsing, nonionic silicone emulsion specially formulated for textile applications where increased sensitivity is a concern. It is ideal for processes such as beck dyeing, yarn dyeing, space dyeing, and warp printing. Providing efficient defoaming and resisting scum formation, EtnaFoam SE-FR 8 ensures consistent performance in demanding environments. A typical starting dosage is 2 ounces per 100 gallons in beck applications, though mills should determine the optimal level for their specific systems. Highly versatile, it is easily dilutable with water, even under shear conditions, for seamless application across various processes.
