Where it is used
Home / Household & Industrial Cleaners / ingredients
Household & Industrial Cleaners
EtnaFoam EBSA is a 100% active ethylene bis stearamide available in approximately 15 pound ingots for use as a component in formulating non-silicone defoamers in mineral oil suspension. The product is readily soluble in all forms of mineral oil, including paraffinic, naphthenic and low boiling cuts such as mineral spirits and mineral seal oil. The product forms clear solutions in these oils at temperatures above 110°C, then begins to titer or flake out at lower temperatures. Typical ranges of concentration for EBSA 100 in oil are 1 to 10%, with the lower levels being used in textile applications and the higher levels being used in paper applications.
No document is attached to this grade yet.
Ascent Chemicals publishes documents in the marked regions.
Ascent Chemicals lists this grade in the Chemicals DB directory.
SierraMide DEA is a Cocamide/DEA 1:1 that is 100% active. Cocamide DEA is derived from the fatty acids from coconut oil and diethanolamine (DEA). In cosmetics and personal care products, SierraMide DEA is used in the formulation of bath soaps and shampoo. SierraMide DEA exhibits powerful foaming action alone or as a foam booster. SierraMide DEA has a wide range of practical uses because of its wetting, detergency, foaming, and low cost.
SierraMide MEA is a surfactant and foam stabilizer derived from Lauric Acid and Monoethanolamine (MEA). It is widely used in personal care, household, and industrial cleaning products due to its foam-boosting, thickening, and emulsifying properties. Additionally, it is compatible with anionic and amphoteric surfactants, further enhancing formulation flexibility in various cleaning and personal care applications.
SierraMine LO is a nonionic to mildly cationic surfactant derived from lauryl dimethylamine and hydrogen peroxide. It is known for its foam-boosting, emulsifying, and viscosity-enhancing properties, making it a key ingredient in personal care, household cleaning, and industrial formulations.
SierraPhos 2-EH acid form is a concentrated surfactant made by the reaction of 2 Ethyl hexanol with P205. The material can be used in its acid form or neutralized to make a variety of functional surfactants. The widest use of this material is as a building block for antistats for textiles and plastics, and as a penetrating surfactant that can be used in several cleaners and functional chemicals. The acid form of SierraPhos 2EH is the most economical and versatile form of this chemistry, other neutralized forms are also available.