Home / Personal Care & Cosmetics / Suppliers / Zschimmer & Schwarz
Personal Care & Cosmetics
Zschimmer & Schwarz
Zschimmer & Schwarz lists 105 grades in Personal Care & Cosmetics. The sheets saved on this site are below.
Grades from Zschimmer & Schwarz
AMPHOTENSID AB-RSPO-MB
AMPHOTENSID AB-RSPO-MB is a universal amphoteric surfactant used in cosmetic products. If it is used in combination with anionic surfactants, it improves the dermatological properties of the formulation, increasing also foam and viscosity. Compliance Highlights Unavailable
AMPHOTENSID B4/C
AMPHOTENSID B4/C is the standard amphoteric surfactant that helps to decrease the aggressiveness of primary sulfate surfactant. Thank’s to its amphoteric character, it does not have incompatibilities with any surfactants. Possible to be used as a primary surfactant in sulfate-free formulations.
AMPHOTENSID B4/C RSPO-MB
AMPHOTENSID B4/C RSPO-MB is the standard amphoteric surfactant that helps to decrease aggressivity of primary sulfate surfactant. Thanks to its amphoteric character, it does not have incompatibilities with any surfactants. Possible to be used as a primary surfactant in a sulfate-free formulations.
AMPHOTENSID B4/CONC-I
AMPHOTENSID B4/CONC-I is high concentration version of Cocamidopropyl Betaine, a universal amphoteric surfactant used in cosmetic and detergent products. If it is used in combination with anionic surfactants, it improves the dermatological properties of the formulation, increasing also foam and viscosity.
AMPHOTENSID COX-MC
AMPHOTENSID COX-MC is mainly used in cosmetic products such as hair shampoos, liquid soaps, shower, and bubble baths. AMPHOTENSID COX-MC shows good foaming power even in hard water. It has defatting properties. So it can be used in formulations for acneic skin and greasy hair.
AMPHOTENSID GB 2009 CONC
AMPHOTENSID GB 2009 CONC is the co-surfactant able to increase the mildness of the formulation, especially recommended for low irritancy formulations like baby care products. Easy to handle due to its low viscosity, and the amphoteric character makes it compatible with anionic, nonionic, cationic, and other amphoteric surfactants.
BIOTRAN SMART WAX
BIOTRAN SMART WAX is a water-based film former which draws on a patented process that combines wax and acrylate in a single polymer network. This polymer provides wear resistance to make-up formulations and allows to achieve both rub-off resistance and transfer resistance in the final pigmented formulations.
ZETESOL LA
ZETESOL LA is a basic material for the formulation of bath preparations and hair shampoos. Compliance Highlights Unavailable
ZETESOL LA 370
ZETESOL LA 370 is a basic material for the formulation of bath preparations and hair shampoos. Compliance Highlights Unavailable
ZETESOL LES 2
ZETESOL LES 2 is a basic material for the formulation of bath preparations and hair shampoos. Compliance Highlights Unavailable
ZETESOL TP 300
ZETESOL TP 300 is used in high-concentrated to water-free bath preparations with a high content of oil. The combination of ZETESOL TP 300 with castor oil results in clear products, independent of the mixing ratio. Less polar oils, e.g. olive or sunflower oil, as well as paraffin oil, require the addition of a co-emulsifier to become clear.
ZETESOL ZN
ZETESOL ZN is an unpreserved anionic surfactant for the formulation of anti-dandruff shampoos and bath preparations with deodorized properties. ZETESOL ZN can be combined with anionic, nonionic and amphoteric surfactants. Formulations with ZETESOL ZN need a pH value lower than 5.0 - 5.5 otherwise turbidity can occur due to precipition of ZnO. ZETESOL ZN has good lathering power and is resistant to water hardness. Diluted solutions of ZETESOL ZN can be thickened by addition of fatty acid alkylolamides (PURTON), special fatty alcohol ethoxylated (OXETAL VD), or electrolytes (ammonium or sodium salts).
LUMOROL K 52
LUMOROL K 52 is a concentrated compound for the formulation of mild bath preparations, hair shampoos, and liquid body cleaners. Due to its special composition, the product has good skin and eye compatibility and creates a fine bubble and stable lather. Compliance Highlights Unavailable
LUMOROL K 5240
LUMOROL K 5240 is one of those highly concentrated surfactant mixtures of anionic, nonionic, and amphoteric surfactants for the production of well-foaming bath preparations, hair shampoos, and other toilet requisite. LUMOROL K 5240 can also be used as the basis for premixed finished products. Final products based on LUMOROL K 5240 maintain their approx. original viscosity even when the product is stored at higher temperatures for longer periods. LUMOROL K 5240 is based on vegetable raw materials.
LUMOROL K 5303
LUMOROL K 5303 is a FAS / FAES and PEG-free compound of very mild cleansing agents that offers excellent foaming properties and viscosity control. Designed to replace FAES in the mild modern cleansing formulation of all types with an especially low skin drying effect.
LUMOROL K 5601
LUMOROL K 5601 is a PEG-free blend of very mild cleansing agents that offers excellent foaming properties. It is a ready-to-use blend, meaning there is no need for other surfactants in rinse-off applications. Formulations with approx. 15 % active matter of LUMOROL K 5601 can be thickened without a thickening agent, only with pH adjustment to a value of about pH 5.5.
MULSIFAN CB
MULSIFAN CB is an oil/water emulsifier for the formulation of creams and lotions. They can easily be produced with simple stirring facilities when using MULSIFAN CB. Emulsion quality can be improved by means of homogenizers. The application quantity between 3 and 6 %, is referred to as the emulsion. Consistency can be adjusted by the addition of e.g. fatty alcohols. MULSIFAN CB is especially suitable for the formulation of low-percentage preparations (12 to 15 % solids).
MULSIFAN CGM 165
MULSIFAN CGM 165 is an O/W emulsifier for creams and lotions. Recommended for the emulsification of mineral and vegetable oils, especially in combination with fatty alcohols and fatty acids. Compliance Highlights Unavailable
MULSIFAN CLA 09 PH
MULSIFAN CLA 09 PH is an oil/water emulsifier/additive for the formulation of skin soothing creams and lotions. It conforms to the European Pharmacopoeia 7.8 Edition 2013. Compliance Highlights Available
MULSIFAN COL 20
MULSIFAN COL 20 is an oil/water emulsifier for the formulation of microemulsions, creams, and lotions and can be used as solubilizer for essential oils. Compliance Highlights Available
MULSIFAN CPA
MULSIFAN CPA is an oil/water emulsifier for the formulation of lotions and oil bathsbathtub. Together with lotions can be produced. MULSIFAN CPA is mainly used in soothing oil baths and oil-containing body cleaners. With MULSIFAN CPA oil baths based on vegetable or liquid synthetic oils and fats can be produced. Eliminate possible cloudiness by adding a small quantity of water. The final dilution in the bathtub gives milky-white emulsions.
OXETAL SE
OXETAL SE is an effective thickening agent for enhancing the viscosity of liquid body cleansing agents. Besides its good thickening properties, OXETAL SE can be used in aqueous formulations and can be added at every step. Its excellent solubility makes it possible for use in continuous production processes. The product is clearly and easily soluble in water
OXETAL VD 20
OXETAL VD 20 is a liquid thickener, free from nitrogen. OXETAL VD 20 offers very good thickening properties in aqueous solutions of fatty alcohol ether sulfates resp. ether sulfate containing surfactant preparations. Further viscosity increase is achieved by the addition of little sodium chloride. Due to its liquid form, OXETAL VD 20 can easily be worked. The use of OXETAL VD 20 in surfactant formulations affects lather stability and a fine-bubble, stable lather.
OXYPON 2145
OXYPON 2145 is used for skin refatting mainly in cosmetic products such as foam baths, shampoos, synthetic toilet soaps (liquid or bars), bath oils (water soluble), etc. Lather quality is not affected. OXYPON 2145 is also applied in hand cleaners. The quantity of application should be 5 to 10 % of the surfactant concentration in the finished product. For creams and lotions, OXYPON 2145 is a suitable emollient. Due to its low odor, OXYPON 2145 is highly recommended for mild formulations at low perfume concentrations.
OXYPON 288
OXYPON 288 can easily be worked into surfactant formulations, without any unfavorable influence on lathering power or thickening properties. It is important to make sure that OXYPON 288 is clear and homogeneous when it is added during the production process. OXYPON 288 is a suitable solubilizer for essential oils and triglycerides in surfactant formulations. The recommended mixing ratio of oil to OXYPON 288 is about 1: 6. Due to its emulsifying properties, OXYPON 288 can also be used as a co-emulsifier in creams and lotions.
OXYPON 328
OXYPON 328 does not have an unfavorable influence on the lathering or thickening properties of finished products. Before or during the incorporation of OXYPON 328 it has to be melted. OXYPON 328 is a suitable solubiliser for vegetable oils, particularly for jojoba oil, in surfactant formulations. The recommended mixing ratio of oil to OXYPON 328 is about 1: 6. Due to its emulsifying properties, OXYPON 328 can also be used as a co-emulsifier in creams and lotions.
OXYPON 365
OXYPON 365 can easily be worked into surfactant formulations, without any unfavorable influence on lathering power or thickening properties. It is important to make sure that OXYPON 365 is clear and homogeneous when it is added during the production process. OXYPON 365 enables the incorporation of triglycerides and to some extent mineral and essential oils into surfactant formulations, the application ratio of OXYPON 365 to the oil being about 4: 1.
PEARLAGENT GM 4055
PEARLAGENT GM 4055 is used as opacifier with light gloss giving effect in cosmetics such as hair shampoos, bath preparations, etc. PEARLAGENT GM 4055 is added at normal temperature before the product is diluted with water to its final concentration. The application quantity amounts up to 10 % according to the desired effect. The stability of the gloss depends on a sufficient viscosity of the final product which can be achieved for example by the addition of sodium chloride, OXETAL VD 20, OXETAL VD 92 or fatty acid alkanol amide (PURTON). PEARLAGENT GM 4055 normally does not require a special density of the basic formulation.
PEARLAGENT GM 4175
PEARLAGENT GM 4175 gives a homogeneous, fine, pearlescent shine to cosmetic products such as hair shampoos, bath preparations, etc. PEARLAGENT GM 4175 is added at normal temperature before the product is diluted with water to its final concentration. The application quantity amounts to up to 10 % according to the desired effect. The stability of the pearly shine depends on a sufficient viscosity of the final product which can be achieved for example by the addition of sodium chloride, OXETAL VD 20, OXETAL VD 92, or fatty acid alkanol amide (PURTON). PEARLAGENT GM 4175 normally does not require a special density of the basic formulation.
PROTELAN 1430
PROTELAN 1430 is applied as a mild co-surfactant for the manufacture of hair shampoos and bath preparations in order to improve foam properties. PROTELAN 1430 accelerates the foam creation and improves the foam stability by forming very fine bubbles. Compared to other surfactants PROTELAN 1430 shows very good foaming properties in the presence of high concentrations of emollients or oils.
PROTELAN AGE
PROTELAN AGE is based on vegetable raw materials and free of preservatives. PROTELAN AGE can be combined with anionic, nonionic, and amphoteric surfactants and improves skin compatibility in such formulations. Therefore, PROTELAN AGE is appropriate for the manufacture of mild body cleansing agents, particularly for baby baths.
PROTELAN AGE – C
PROTELAN AGE – C is based on vegetable raw material and free of preservatives. PROTELAN AGE – C can be combined with anionic, nonionic and amphoteric surfactants and improves the skin compatibility in such formulations. Therefore PROTELAN AGE – C is appropriate for the manufacture of mild body cleansing agents, particularly for baby baths.
PROTELAN AGL 95
PROTELAN AGL 95 is based on vegetable raw materials and free of preservatives. PROTELAN AGL 95 can be combined with anionic, nonionic and amphoteric surfactants and improves the skin compatibility in such formulations. Therefore PROTELAN AGL 95 is appropriate for the manufacture of mild body cleansing agents, particularly for baby baths. The addition of PROTELAN AGL 95 to formulations containing ether sulfate improves the foam formation and the creaminess of the foam.
PROTELAN AGL 95 – EC
PROTELAN AGL 95 – EC is based on vegetable raw materials and free of preservatives. PROTELAN AGL 95 – EC can be combined with anionic, nonionic and amphoteric surfactants and improves the skin compatibility in such formulations. Therefore PROTELAN AGL 95 – EC is appropriate for the manufacture of mild body cleansing agents, particularly for baby baths. The addition of PROTELAN AGL 95 – EC to formulations containing ether sulfates improves the foam formation and the creaminess of the foam and can supply a smooth skin feeling. PROTELAN AGL 95 – EC is also a suitable emulsifier for cold and warm processed emulsions, based on various oils and emollients. Cold produced emulsions should include a polymeric thickener, such as Carbomer types, to adjust the viscosity and improve the stability of the formulation. PROTELAN AGL 95 – EC is COSMOS approved.
PROTELAN AGL 95 – EC – RSPO – MB
PROTELAN AGL 95 – EC – RSPO - MB is based on vegetable raw materials and free of preservatives. PROTELAN AGL 95 – EC – RSPO - MB can be combined with anionic, nonionic and amphoteric surfactants and improves the skin compatibility in such formulations. Therefore PROTELAN AGL 95 – EC – RSPO - MB is appropriate for the manufacture of mild body cleansing agents, particularly for baby baths. The addition of PROTELAN AGL 95 – EC – RSPO - MB to formulations containing ether sulfates improves the foam formation and the creaminess of the foam and can supply a smooth skin feeling. PROTELAN AGL 95 – EC – RSPO - MB is also a suitable emulsifier for cold and warm processed emulsions, based on various oils and emollients. Cold produced emulsions should include a polymeric thickener, such as Carbomer types, to adjust the viscosity and improve the stability of the formulation. PROTELAN AGL 95 – EC – RSPO - MB is COSMOS approved.
PROTELAN AGL 95 PV
PROTELAN AGL 95 PV is based on vegetable raw materials and free of preservatives. PROTELAN AGL 95 PV can be combined with anionic, nonionic and amphoteric surfactants and improves skin compatibility in such formulations. Therefore PROTELAN AGL 95 PV is appropriate for the manufacture of mild body cleansing agents, particularly for baby baths. The addition of PROTELAN AGL 95 PV to formulations containing ether sulfate, improves the foam formation and the creaminess of the foam.
PROTELAN ENS – RSPO – MB
PROTELAN ENS – RSPO – MB is an O/W self-emulsifying base made from vegetable raw materials without ethoxylated compounds. PROTELAN ENS – RSPO – MB can be used in emulsions of high cosmetic elegance. It is able to provide a very nice and silky skin feeling to any type of emulsions and to give in this cosmetic aspect a detectible difference to commonly used emulsifiers.
PROTELAN ESG
PROTELAN ESG is an O/W self-emulsifying base made from vegetable raw materials without ethoxilated compounds. PROTELAN ESG can be used in emulsions of high cosmetic elegance. It is able to provide a very nice and silky skin feeling to any type of emulsions and to give in this cosmetic aspect a detectible difference to commonly used emulsifiers.
PROTELAN GC
PROTELAN GC is a mild anionic co-surfactant for the formulation of hair shampoos and liquid body cleansing agents. PROTELAN GC can be combined with anionic, nonionic and amphoteric surfactants. The addition PROTELAN GC improves the foam formation and the creaminess of the foam, particularly when used in formulations with higher pH values and in presence of soaps. PROTELAN GC is easy to thicken, free of preservatives and based on vegetable raw materials.
PROTELAN MGL – EC
PROTELAN MGL – EC is based on vegetable raw materials and free of preservatives. PROTELAN MGL – EC can be combined with anionic, nonionic and amphoteric surfactants and improves skin compatibility in such formulations. Therefore, the addition of PROTELAN MGL - EC to formulations containing ether sulfates, improves the foam formation and the creaminess of the foam and can supply a smooth skin feeling. It is highly recommended for hair shampoos thanks to its myristoyl carbon chain, that provides a conditioning effect enhancing hair combability and smoothness. PROTELAN MGL - EC is COSMOS approved.
PROTELAN MST 35
PROTELAN AGL MST 35 is based on vegetable raw materials and free of preservatives; particularly indicated for low-pH products, thanks to its low pH stability. PROTELAN AGL MST 35 is also recommended for oral care in natural toothpastes and in hair care shampoos, especially shampoos dedicated to coloured hair.
PROTELAN NMF
PROTELAN NMF is an O/W self-emulsifying base made from vegetable raw materials without ethoxylated compounds. PROTELAN NMF can be used in emulsions of high cosmetic elegance. It is able to provide a very nice and silky skin feeling to any type of emulsion. By variation of the used concentration both creams and loitons can be produced. Furthermore an excellent moisturizing effect is provided.
PROTELAN PCA 40
PROTELAN PCA 40 is a liquid, unpreserved solution of Sodium PCA in glycerine and water. PROTELAN PCA 40 can be used for skin and hair care products, especially creams, lotions, syndicate bars, hair shampoos, and conditioners. The recommended dosage of PROTELAN PCA 40 to be used for rinse-off products is 0.5 - 1 % active ingredient and for leave-on products 1- 2.5 % active ingredient.
PURTON C12 – RSPO – MB
PURTON C12 – RSPO – MB is a high concentrated surfactant, without any incompatibilities, suitable for body rinse off products, such as batch foams and shower gels. It shows excellent solubilizing properties, making easy the incorporation of perfumes and lipo-actives. Made with renewable feedstocks, it helps to decrease harshness of primary surfactants.
PURTON C810-RSPO-MB
PURTON C810-RSPO-MB is a basic material for the formulation of bath preparations and hair shampoos. Compliance Highlights Unavailable
PURTON C816-RSPO-MB
PURTON C816 is a high concentrated surfactant, without any incompatibilities, suitable for body rinse off products, such as batch foams and shower gels. It shows excellent solubilizing properties, making easy the incorporation of perfumes and lipo-actives. Made with renewable feedstocks, it helps to decrease harshness of primary surfactants.
PURTON C818 – RSPO – MB
PURTON C818 – RSPO – MB is a high concentrated surfactant, without any incompatibilities, suitable for body rinse off products, such as batch foams and shower gels. It shows excellent solubilizing properties, making easy the incorporation of perfumes and lipo-actives. Made with renewable feedstocks, it helps to decrease harshness of primary surfactants.
SEBUMOL B 1000
SEBUMOL B 1000 is a liquid and PEG-free oil/water emulsifier for the formulation of oil bath preparations. Due to its appearance SEBUMOL B 1000 is easy to blend with the oil phase. Depending on the oil phase you choose further addition of Turkey Red Oil to guarantee that, when applied in the bath, the oil bath will disperse well while showing a magnificent blooming effect.
SEBUMOL PGPR
SEBUMOL PGPR is a natural nonionic emulsifier, suitable to obtain smart and silky lotions. Widely used also in colour cosmetics, especially lipstick, due to its high lubricity and as wetting agent for pigments. Compliance Highlights Unavailable
SEBUMOL WO 300
SEBUMOL WO 300 is a liquid, clear, and PEG-free water/oil emulsifier for the formulation of creams and lotions for sensitive skin or baby care. Due to its appearance SEBUMOL WO 300 is easy to mix with the oil phase. SEBUMOL WO 300 is specially designed for the emulsification of vegetable-based respectively natural oils of higher polarity.
SETACIN F SPEZIAL PASTE
SETACIN F SPEZIAL PASTE can be combined with anionic, nonionic and amphoteric surfactants. Because of its mildness and lathering power it is used in the formulation of creamy and pasty body cleaners, e.g. face cleansing creams, cream shampoos and hand cleaning pastes.
SULFETAL C 90 POWDER
SULFETAL C 90 POWDER is a basic material for the formulation of bath preparations and hair shampoos. Compliance Highlights Unavailable
SULFETAL C 90/C
SULFETAL C 90/C is an unpreserved surfactant, recommended as primary surfactant for solid rinse off products, in combination with bulking agents like starches, kaolin or talc. Widely used in oral care in toothpastes as cleaning agent. Compliance Highlights Unavailable
SULFETAL CA
SULFETAL CA is a basic material for the formulation of bath preparations and hair shampoos. Compliance Highlights Unavailable
SULFETAL LA
SULFETAL LA is a basic material for the formulation of bath preparations and hair shampoos. Compliance Highlights Unavailable
SULFETAL LM
SULFETAL LM is a basic material for the formulation of bath preparations and hair shampoos. Compliance Highlights Unavailable
SYNTRAN® 5009CG
SYNTRAN® 5009CG is a film-forming material providing benefits in many applications. Through a proprietary polymerization process with a selection of functional groups, INTERPOLYMER’s technology improves the properties of adhesion, cohesion, gloss, flexibility, dispersion, and water resistance. The film formers offered by INTERPOLYMER are used in a wide range of cosmetics and skin care products by many international companies. Depending on the application and the objective, SYNTRAN® 5009CG can be used in a formulation at a level of 5 to 70 percent.
SYNTRAN® 5100CG
SYNTRAN® 5100CG is based on a patented bimodal technology with film forming properties. This unique interpenetrating network with two different ionic structures increases the adhesion and shortens the setting time. SYNTRAN® 5100CG, when appropriately formulated, firms and tightens the skin without flaking and powdering. SYNTRAN® 5100CG can be used in a formulation at a level of 8 to 20 percent.
SYNTRAN® 5190CG
SYNTRAN® 5190CG is a film-forming material providing benefits in many applications. Through a proprietary polymerization process with a selection of functional groups, INTERPOLYMER’s technology improves the properties of adhesion, cohesion, gloss, flexibility, dispersion, and water resistance. The film formers offered by INTERPOLYMER are used in a wide range of cosmetics and skin care products by many international companies. Depending on the application and the objective, SYNTRAN® 5190CG can be used in a formulation at a level of 5 to 70 percent.
SYNTRAN® 5288
SYNTRAN® 5288 is based on a patented olefin grafted technology. An amorphous functional acrylic polymer section is grafted onto a crystalline polyethylene backbone. The crystalline portion provides barrier, moisture retention, elasticity, and tactile attributes such as lubricity and "feel". The amorphous portion provides film formation, adhesion, substantivity, and formulation flexibility. The grafting technology results in a uniform film with the benefits of both chemistries. Its recommended use level is 5 to 55 percent as supplied.
SYNTRAN® 5402
SYNTRAN® 5402 is a clear solution polymer in water with dispersing and film-forming properties. The polymer is a good companion product to improve pigment dispersion, avoid aggregates, and solve wetting issues. It enhances certain characteristics of the film such as leveling, gloss, hardness, and removability.
SYNTRAN® 5620CG
SYNTRAN® 5620CG has been developed for advanced water-based nail polishes. Through a proprietary technology designated SAFE – a “State-of-the-art” Acrylate Film-forming Emulsion – INTERPOLYMER offers an alternative to solvent-based nail polishes. Polishes based on SYNTRAN® 5620CG exhibit superior gloss, quick drying time, good water resistance, adequate hardness, excellent adhesion, and long-lasting wear properties.
SYNTRAN® 5712
SYNTRAN® 5712 is a film-forming material providing benefits in several applications. Mainly dedicated to decorative cosmetics, this reference forms a clear, flexible film at the surface of the support and will give properties such as wear resistance, transfer resistance to the final products.
SYNTRAN® 5760CG
SYNTRAN® 5760CG is a film-forming material providing benefits in many applications. Through a proprietary polymerization process with a selection of functional groups, INTERPOLYMER’s technology improves the properties of adhesion, cohesion, gloss, flexibility, dispersion, and water resistance. The film formers offered by INTERPOLYMER are used in a wide range of cosmetics and skin care products by many international companies. Depending on the application and the objective, SYNTRAN® 5760CG can be used in a formulation at a level of 5 to 70 percent.
SYNTRAN® 5762
SYNTRAN® 5762 is a film-forming material providing benefits in many applications. Through a proprietary polymerization process with a selection of functional groups, ZSCHIMMER & SCHWARZ INTERPOLYMER’s technology improves the properties of adhesion, cohesion, gloss, flexibility, dispersion, and water resistance. The film formers offered by ZSCHIMMER & SCHWARZ INTERPOLYMER are used in a wide range of cosmetics and skincare products by many international companies. Depending on the application and the objective, SYNTRAN® 5762 can be used in a formulation at a level of 5 to 70 percent.
SYNTRAN® 5778
SYNTRAN® 5778 is based on patented bimodal technology with film-forming properties. This unique interpenetrating network with two different ionic structures increases the adhesion, decreases the setting time, and still allows a controlled removability without compromising the good water resistance. According to the application and the objective the SYNTRAN® 5778 can be used between 5 and 70 percent.
SYNTRAN® 5900
SYNTRAN® 5900 is a water-based emulsion that modifies the visual appearance of personal care products from clear to opaque without affecting the other desired properties of the formula. SYNTRAN® opacifiers give whiteness and density at significantly low levels (from 0.1 to 1.0 percent as supplied) with excellent formulation stability. SYNTRAN® 5900 is slowly added to the base product under agitation at the end of the manufacturing cycle (i.e., after final adjustment). Stability control is recommended.
SYNTRAN® 5905
SYNTRAN® 5905 is a water-based emulsion that modifies the visual appearance of personal care products from clear to opaque without affecting the other desired properties of the formula. SYNTRAN® opacifiers give whiteness and density at significantly low levels (from 0.1 to 1.0 percent as supplied) with excellent formulation stability. SYNTRAN® 5905 is slowly added to the base product under agitation at the end of the manufacturing cycle (i.e., after final adjustment). Stability control is recommended.
SYNTRAN® 5907
SYNTRAN® 5907 is a water-based emulsion that modifies the visual appearance of personal care products from clear to opaque without affecting the other desired properties of the formula. SYNTRAN® opacifiers give whiteness and density at significantly low levels (from 0.1 to 1.0 percent as supplied) with excellent formulation stability. SYNTRAN® 5907 is slowly added to the base product under agitation at the end of the manufacturing cycle (i.e., after final adjustment). Stability control is recommended.
SYNTRAN® KL219CG
SYNTRAN® KL219CG is a clear solution polymer in water with dispersing and film forming properties. The polymer is a good companion product to improve pigment dispersion, avoid aggregates, and solve the wetting issues. It enhances certain characteristics of the film such as leveling, gloss, hardness, and removability.
TURKEY RED OIL
TURKEY RED OIL is a solubilizing agent for essential oils. It is mainly used in low foaming bath preparations. Due to its oily components TURKEY RED OIL is applied as emollient in shower baths, liquid soaps and hand cleansing pastes. Compliance Highlights Available
ZETEMOL 2IS
ZETEMOL 2IS is a non-greasy long chain ester with low freeze point. It helps to enhance hydration acting as a barrier effect decreasing Trans Epidermal Water Loss over time and increasing Corneometry. ZETEMOL 2IS is appropriate for use in lipsticks and as a binding agent for make-up powders, moreover as a pigment.
ZETEMOL 518
ZETEMOL 518 is an emollient with medium absorption, ideally suited for sun care products, color cosmetics, and antiperspirants. Compliance Highlights Unavailable
ZETEMOL 5418
ZETEMOL 5418 is a liquid emollient derived from isostearic acid that provides high levels of gloss, water resistance, and substantivity. Compliance Highlights Unavailable
ZETEMOL 99
ZETEMOL 99 is a lightweight emollient ester with fast absorption. It imparts a dry, non-oily smooth after-feel to the skin. Compliance Highlights Unavailable
ZETEMOL AB
ZETEMOL AB is a cost effective medium-light emollient, suitable for any kind of skin care preparations, with good solubilizing properties for the most common used chemical crystalline UV-filters. Compliance Highlights Unavailable
ZETEMOL AL RSPO-MB
ZETEMOL AL RSPO-MB shows high solubility in water-based solutions. It is highly recommended in surfactant preparation both for viscosity booster and conditioner. Compliance Highlights Unavailable
ZETEMOL CSO
ZETEMOL CSO is a medium viscosity emollient, with low occlusivity and oxidation stable. It is suitable for O/W creams and lotions as well as W/O creams and lotions. Compliance Highlights Unavailable
ZETEMOL DO
ZETEMOL DO is an ester by natural feedstocks, oleic acid and decyl alcohol. It shows medium spreading and lubricity. Compliance Highlights Unavailable
ZETEMOL GTCC
ZETEMOL GTCC is a high lubricity ester with medium-low absorption, made by glycerol from vegetable oil sources and medium-chain fatty acids from coconut or palm kernel oil. Compliance Highlights Unavailable
ZETEMOL HE
ZETEMOL HE is a water-soluble polyol fatty acid ester, suitable as refatting agent for toiletries applications. Compliance Highlights Unavailable
ZETEMOL MM-RSPO-MB
ZETEMOL MM – RSPO – MB is a 100% COSMOS approved natural vegetable derived ester from C-14 chains fatty acids. It is ideal for use in creams to impart body and structure di O/W emulsions and colour cosmetics applications like lipsticks. Compliance Highlights Unavailable
ZETEMOL OC
ZETEMOL OC is an emollient made by a reaction from fatty acids coming from palm kernel oil and ethylhexyl alcohol. Compliance Highlights Unavailable
ZETEMOL OE
ZETEMOL OE is a COSMOS approved ether that shows very high skin absorption and low lubricity. It is particularly suitable for all the preparations that require extreme pH (high and low), such as AP/deo and depilatory formulations and permanent color hair creams.
ZETEMOL OL
ZETEMOL OL is an emollient made by a reaction from lauric acid and Ethylhexyl alcohol. Compliance Highlights Unavailable
ZETEMOL OLO
ZETEMOL OLO is a COSMOS approved non-oily emollient, with medium absorption and spreadability, suitable for all cosmetic preparations. Compliance Highlights Unavailable
ZETEMOL OP-RSPO-MB
ZETEMOL OP-RSPO-MB is probably the most used product worldwide, it is made by reaction from palmitic acid and ethyhexyl alcohol. It is a cost effective ester suitable for all cosmetic preparations like skin and sun care, hair care and color cosmetic applications.
ZETEMOL OSB
ZETEMOL OSB is made by a reaction of a dicarboxylic acid and ethylhexyl alcohol. It shows fast absorption and good pigment dispersing properties expecially for color cosmetics. Compliance Highlights Unavailable
ZETEMOL OSB-RSPO-MB
ZETEMOL OS-RSPO-MB is an emollient made by a reaction from stearic acid and Ethylhexyl alcohol. It is a cost-effective ester suitable for all cosmetic preparations like skin and sun care, hair care, and color cosmetic applications. Compliance Highlights Unavailable
ZETEMULS B 20
ZETEMULS B 20 is an O/W emulsifier. Compliance Highlights Unavailable
ZETEMULS COH 40
ZETEMULS COH 40 shows excellent performance as a solubilizer in a variety of personal care products, such as toiletries, tonics, aqueous solutions and mouthwashes. Compliance Highlights Unavailable
ZETEMULS HC PLUS
ZETEMULS HC PLUS shows the highest efficacy at acidic pH, from 4.0 to 5.5. The presence of consistency factors, help to achieve the desired viscosity; this feature allows the formulator to manufacture several hair care products, from hair mask at different viscosity that match the final packaging, to extremely light leave in conditioner in spray form. Recommended not only for domestic, but also for professional products.
ZETEMULS RT 141
ZETEMULS RT 141 shows good performance as a solubilizer in a variety of personal care products, such as toiletries, tonics, aqueous solutions and mouthwashes. Compliance Highlights Unavailable
ZETEMULS SLL
ZETEMULS SLL is a natural multitalented O/W emulsifier; it helps to maintain skin hydration. Compliance Highlights Unavailable
ZETESAP 813 P RSPO-MB
ZETESAP 813 P RSPO-MB is used to produce syndet bars. It is possible to use a broad range of additives in ZETESAP 813 P RSPO-MB because of the possibility to adjust the pH value. ZETESAP 813 P RSPO-MB is easy to be perfumed and color. Compliance Highlights Available
ZETESAP 900
ZETESAP 915 CS RSPO-MB is a cosmetic base formula, certified as 63,28 % CPAI (non-organic) by IONC GmbH according to COSMOS-Standard, available under http://ionc.info/en-gb/cosmos-standard. ZETESAP 915 CS RSPO-MB is NATRUE approved. It creates rich and creamy foam and is completely based on renewable raw materials. It is soap-free and therefore also suitable in hard water. The syndet base can be adjusted to acidic pH values, e.g., natural skin pH conditions.
ZETESAP 915 CS RSPO-MB
ZETESAP 915 CS RSPO-MB is a cosmetic base formula, certified as 63,28 % CPAI (non-organic) by IONC GmbH according to COSMOS-Standard, available under http://ionc.info/en-gb/cosmos-standard. ZETESAP 915 CS RSPO-MB is NATRUE approved. It creates rich and creamy foam and is completely based on renewable raw materials. It is soap-free and therefore also suitable in hard water. The syndet base can be adjusted to acidic pH values, e.g., natural skin pH conditions.
ZETESAP C 11
ZETESAP C 11 is a hot melt compound for the manufacture of high-quality transparent bars for a personal wash. It combines effective cleansing and pleasant skin feel with the visual impact offered by its superior clear appearance and excellent foam. Compliance Highlights Available
ZETESAP NATURAL WAX
ZETESAP NATURAL WAX is a natural-based solid compound for syndet bars. Rich and creamy foaming solid emulsion formulated by combinding natural-based surfactants and vegetable wax. Soap free and therefore well rinsing even in hard water without leaving residues on the skin. Can be adjusted to acidic pH values, i.e. natural skin-pH conditions. Compatible with all cosmetic ingredients. Very good lathering properties and easy processability.
ZETESOL 250
ZETESOL 250 is a basic material for the formulation of bath preparations and hair shampoos. Compliance Highlights Unavailable
ZETESOL 250/C
ZETESOL 250/C is the basic material for the formulation of high foaming hair shampoos and bath preparations. ZETESOL 250/C can be combined with anionic, nonionic and amphoteric surfactants; easy to thicken with sodium chloride. It shows high foamability, and high solubilizing properties.
ZETESOL 270/N
ZETESOL 270/N is a basic material for the formulation of bath preparations and hair shampoos. Compliance Highlights Unavailable
ZETESOL 370/N
ZETESOL 370/N is the basic material for the formulation of a variety of products, such as bath foam, shower gel, high foaming hair shampoos. It does not have incompatibilities with other surfactants, anionics, nonionics and amphoterics. Compliance Highlights Unavailable
ZETESOL AN 27
ZETESOL AN 27 is a basic material for the formulation of bath preparations and hair shampoos. Compliance Highlights Unavailable
ZETESOL AN/70
ZETESOL AN/70 is a basic material for the formulation of bath preparations and hair shampoos. Compliance Highlights Unavailable
