Home / Personal Care & Cosmetics / Suppliers / Samyang KCI Corporation

Personal Care & Cosmetics

Samyang KCI Corporation

Samyang KCI Corporation lists 112 grades in Personal Care & Cosmetics. The sheets saved on this site are below.

Listed grades112
Sheets here148
Formulas here36
PERSONAL CARE & COSMETICS SUPPLIER Samyang KCI Corporation

Grades from Samyang KCI Corporation

Clear Shampoo [ACEcare F30KC] (Formulation #CHSH_012)

formulations

A clear shampoo base designed to suspend beads or flower petals, providing A visually appealing effect.

Conditioner Bar (Formulation #CHCO_003)

formulations

Waterless formula that not only helps protect the environment but also offers more effective conditioning and hydration through concentrated active ingredients. Delivers rich nutrition and moisture, leaving hair healthy and smooth.

Conditioner Bar (Formulation #CHCO_004)

formulations

Waterless formula that not only helps protect the environment but also offers more effective conditioning and hydration through concentrated active ingredients. Delivers rich nutrition and moisture, leaving hair healthy and smooth.

Derma All-in-One Lotion (Formulation #CSCR_016)

formulations

Silicone-free, PEG-free, and EO-free formula. Crafted exclusively with EWG Green Grade ingredients, this hypoallergenic lotion is gentle enough for even the most sensitive skin. A versatile, all-in-one moisturizer suitable for use from face to toe. Enriched with a sugar-derived humectant for enhanced moisturizing benefits.

Derma Essence (Formulation #CSES_003)

formulations

Formulated exclusively with EWG Green Grade ingredients, ensuring safety and gentleness for all skin types. Provides deep moisturization to the skin, enhancing hydration and suppleness. Enriched with Niacinamide and Adenosine to promote skin brightening and improve the appearance of wrinkles, delivering a dual-functional benefit. Offers a lightweight yet nourishing texture, making it suitable for sensitive or delicate skin.

Derma Water Serum (Formulation #CSES_008)

formulations

A water-based serum formulated with just 6 ingredients, offering a soft application and deep moisturizing effect upon absorption. Free from PEG, parabens, artificial fragrances, silicones, and alcohol, ensuring a clean and gentle formula. Comparable in performance to a renowned transparent energy serum, providing similar revitalizing benefits.

AHA/BHA Cream (Formulation #CSCR_014)

formulations

A peeling and moisturizing cream formulated with AHA and BHA, which efficiently dissolve dead skin cells while simultaneously providing moisture to the skin. Demonstrates excellent compatibility with AHA, making it ideal for incorporation into low pH formulations.

All-in-One Lotion (Formulation #CSCR_016_2)

formulations

A versatile, all-in-one moisturizer suitable for use from face to toe. Enriched with a sugar-derived humectant for enhanced moisturizing benefits.

EWG Green Toner (Formulation #CSTO_001)

formulations

A toner made entirely with EWG Green Grade ingredients. Provides a moisturizing sensation. Enriched with Panthenol and plant-derived collagen to enhance moisture retention and improve skin elasticity.

Hair Essence (Formulation #CHES_004)

formulations

Provides both moisture and oil to the hair, offering superior benefits compared to Carbomer based formula. Nourishes the hair without resulting in a stiff or rigid texture. Has a slightly thicker consistency, delivering a smooth and glossy finish with long-lasting shine.

Anti-Acne Spot Cream (Formulation #CSCR_022)

formulations

Containing Glycolic Acid and Salicylic Acid, gently exfoliates dead skin while providing moisture. Ideal for targeted spot care. The formula soothes and protects irritated skin with AHA, BHA, Ceramide, and Polyquaternium-51. Free from silicones formula.

Anti-Acne Toner (Formulation #CSTO_005)

formulations

Formulated with Glycolic Acid, this product gently exfoliates dead skin cells.

Anti-Acne Toner (Formulation #CSTO_006)

formulations

Enriched with Salicylic Acid, this product effectively removes sebum and dead skin associated with acne and blackheads, making it ideal for individuals with oily or acne-prone skin.

Anti-Dandruff Clear Shampoo (Formulation #CHSH_008)

formulations

Anti-dandruff shampoo contains Piroctone Olamine as a safer alternative to Zinc Pyrithione, which has been classified as a carcinogenic substance in Europe. Delivers smoothness through the inclusion of a cationic polymer. This clear appearacne shampoo is highly effective in scalp care, offering a rich lather and excellent conditioning properties.

Anti-Dandruff Clear Shampoo (Formulation #CHSH_009)

formulations

Anti-dandruff shampoo contains Piroctone Olamine as a safer alternative to Zinc Pyrithione, which has been classified as a carcinogenic substance in Europe. Delivers smoothness through the inclusion of a cationic polymer. This clear appearacne shampoo is highly effective in scalp care, offering a rich lather and excellent conditioning properties.

Anti-Dandruff Clear Shampoo (Formulation #CHSH_010)

formulations

Anti-dandruff shampoo contains Piroctone Olamine as a safer alternative to Zinc Pyrithione, which has been classified as a carcinogenic substance in Europe. Delivers smoothness through the inclusion of a cationic polymer. This clear appearacne shampoo is highly effective in scalp care, offering a rich lather and excellent conditioning properties.

Anti-Dandruff Conditioner (Formulation #CHCO_007)

formulations

Conditioner containing Piroctone Olamine as a safer alternative to Zinc Pyrithione, which has been classified as a carcinogenic substance in Europe. Enhances the delivery of anti-dandruff and hair loss prevention ingredients to the scalp effectively.

Anti-Dandruff Pearl Shampoo (Formulation #CHSH_011)

formulations

A mildly acidic, viscous shampoo with a pearlescent texture. Starts with small bubbles that become richer, allowing for deep cleansing while leaving the hair feeling moisturized after rinsing. Formulated with Piroctone olamine as a safer alternative to Zinc Pyrithione, which has been classified as a carcinogenic substance in Europe and menthol to prevent dandruff and provide a cooling sensation to the scalp.

Hair Loss Relief Shampoo (Formulation #CHSH_013)

formulations

Enhanced foaming power and increased viscosity. Provides softness and smoothness to the hair. Helps relieve symptoms of hair loss and soothes scalp itching.

Leave-In Conditioner [Spray Type] (Formulation #CHCO_006)

formulations

Specifically formulated as a spray for hair application only. Softens the hair while helping to maintain straightness. Enriched with coconut oil to nourish the hair, providing a refreshing, non-greasy finish without leaving a sticky residue on the hands.

Leave-In Treatment (Formulation #CHTR_003)

formulations

Delivers exceptional softness and hydration to the hair. Nourishes and strengthens damaged hair, promoting healthier and more resilient hair condition.

Mild Cleansing Foam (Formulation #CSFA_004)

formulations

A mild, low-irritation acidic cleansing foam formulated with gentle surfactants. Adheres well to skin oils and effectively removes them. Replenishes moisture after cleansing. Leaves the skin feeling soft and smooth even after rinsing.

Mild Face Peeling Gel (Formulation #CSFA_003)

formulations

Soft peeling gel in a gommage type. Low-irritation peeling suitable for all skin types, including sensitive skin. Gently exfoliates while providing moisture to damaged skin. Smooth and refreshing application.

Pearl Shampoo (Formulation #CHSH_005)

formulations

A mildly acidic, viscous shampoo with a pearlescent appearance. Starts with small bubbles that become richer, allowing for deep cleansing while leaving the hair feeling moisturized after rinsing.

Pearl Shampoo (Formulation #CHSH_007)

formulations

A mildly acidic, viscous shampoo with a pearlescent appearance. Starts with small bubbles that become richer, allowing for deep cleansing while leaving the hair feeling moisturized after rinsing.

Baby Shiny Shampoo (Formulation #CHSH_001)

formulations

Mildly acidic, low-irritation baby shampoo designed for gentle care. Rich, foaming pearl shampoo that offers excellent conditioning benefits.

Baby Shiny Shampoo (Formulation #CHSH_006)

formulations

Mildly acidic, low-irritation baby shampoo designed for gentle care. Rich, foaming pearl shampoo that offers excellent conditioning benefits.

Scalp Serum (Formulation #CHTO_002)

formulations

A slightly acidic, transparent liquid that enhances the solubility of caffeine by incorporating DMI, improving formulation stability and aiding in scalp absorption. Free from parabens, artificial colorants, silicones, and alcohol.

Scalp Serum (Formulation #CHTO_003)

formulations

A slightly acidic, transparent liquid that enhances the solubility of caffeine by incorporating DMI, improving formulation stability and aiding in scalp absorption. Free from parabens, artificial colorants, silicones, and alcohol.

Sulfate-Free Body Wash (Formulation #CBBC_006)

formulations

Sulfate-free body wash formulation using amphoteric and amino acid-based anionic surfactants. Has a soft application feel. Low irritation and mild on the skin.

Sulfate-Free Body Wash (Formulation #CBBC_007)

formulations

Sulfate-free body wash formulation using amphoteric and amino acid-based anionic surfactants. Has a soft application feel. Low irritation and mild on the skin.

Transparent Body Wash (Formulation #CBBC_005)

formulations

Rich and dense foam. Non-stiff finish. High cleansing power.

Whitening Essence (Formulation #CSES_012)

formulations

Exclusively with EWG Green Grade raw materials used. Provides deep hydration for the skin. Contains niacinamide, offering brightening and skin tone-evening benefits. Free from PEG, silicone, and phenoxyethanol.

Body Care Mist (Formulation #CBMI_001)

formulations

Mildly acidic body mist. Contains Salicylic Acid for gentle exfoliation. Infused with Menthol for a refreshing cooling effect. Offers a fresh and lightweight application experience.

Body Care Spot Gel (Formulation #CBCR_002)

formulations

Provides exfoliation through AHA. Infused with Menthol for a refreshing cooling sensation. Delivers a fresh and lightweight application experience.

2-Phase Oil Serum (Formulation #CSES_005)

formulations

An oil serum featuring a lightweight, essence-like texture that delivers a firm and supple finish. Offers deep hydration, nourishment, and improved skin elasticity. Formulated with PGL emulsifiers, which are free from EO and PEG, ensuring effective blending of the oil and serum layers. This 2-phase serum simultaneously provides both moisture and oil for balanced skin care.

ACEcare F30KC

ingredients

ACEcare F30KC is a milky liquid, acrylic rheology modifier which contains 30% active polymer to thicken, suspend and stabilize the surfactant & soap based personal cleansing products. Compliance Highlights Available

Amidox SO 30KC

ingredients

Amidox SO 30KC is an exceptional foam booster for the formulations such as shampoo, body cleanser, body wash and so on since it has low irritation. It can partially replace anionic surfactant for shampoo, body wash formulations although it’s commonly known to replace nonionic surfactant. It enables development of mild & low irritant products by reducing SLES dosage.

BTAC 220KC

ingredients

BTAC 220KC is a quaternary ammonium salt, dissolved in alcohol(Propylene glycol) and warm water. It used as a strong conditioning agent, antistatic agent, detergent and softening agent. It has good compatibility with other cationic and nonionic surfactants. It reacts with anionic surfactants by forming electroneutral salts.

BTAC 228KC (Ethanol)

ingredients

BTAC 228KC is a quaternary ammonium salt, dissolved in alcohol(Ethanol) and warm water. It used as a strong conditioning agent, antistatic agent, detergent and softening agent. It has good compatibility with other cationic and nonionic surfactants. It reacts with anionic surfactants by forming electroneutral salts.

BTAC D7570KC

ingredients

BTAC D7570KC is a quaternary ammonium salt, dissolved in alcohol(Dipropylene glycol) and warm water. It used as a strong conditioning agent, antistatic agent, detergent and softening agent. It has good compatibility with other cationic and nonionic surfactants. It reacts with anionic surfactants by forming electroneutral salts.

BTAC P7580KC

ingredients

BTAC P7580KC is a quaternary ammonium salt, dissolved in alcohol(Isopropyl alcohol) and warm water. It used as a strong conditioning agent, antistatic agent, detergent and softening agent. It has good compatibility with other cationic and nonionic surfactants. It reacts with anionic surfactants by forming electroneutral salts.

BTAC PF4050KC

ingredients

BTAC PF4050KC is a quaternary ammonium salt, dissolved in alcohol(Cetearyl alcohol) and warm water. It used as a strong hair conditioning agent without IPA(IPA free), antistatic agent, detergent and softening agent. It can be used in hair conditioners, hair mist and hair essence as well as other hair related products. It has good compatibility with other cationic and nonionic surfactants. It reacts with anionic surfactants by forming electroneutral salts. Natural, eco-friendly. Natural Origin Index (ISO 16128) - 0.905.

BTMS 225KC

ingredients

BTMS 225KC is a pelletized 25% active Behenyl(derived from the rape seed oil) quaternary ammonium conditioning agent, Cetyl alcohol and Stearyl alcohol. BTMS 225KC is dissolved in alcohol and dispersed in warm water. BTMS 225KC is an exceptionally effective cationic self-emulsifying wax. It is used as strong hair conditioning agent, antistatic agent and softening agent. It can be used in hair conditioners, hair mist and hair essence as well as other hair related products. It has good compatibility with other cationic and nonionic surfactants. It reacts with anionic surfactants by forming electro-neutral salts. It's soluble in water but stable solutions can be obtained by using an excess of an anionic compound. Natural, eco-friendly. Natural Origin Index (ISO 16128) - 0.911.

BTMS 7550KC

ingredients

BTMS 7550KC is a pelletized 50% active Behenyl(derived from the rape seed oil) quaternary ammonium conditioning agent, Cetyl alcohol and Butylene glycol. BTMS 7550KC is dissolved in alcohol and dispersed in warm water. BTMS 7550KC is an exceptionally effective cationic self-emulsifying wax. It is used as strong conditioning agent, antistatic agent and softening agent. It has good compatibility with other cationic and nonionic surfactants. It reacts with anionic surfactants by forming electro-neutral salts. It's soluble in water but stable solutions can be obtained by using an excess of an anionic compound.

BTMS C7550KC

ingredients

BTMS C7550KC is a pelletized 50% active Behenyl(derived from the rape seed oil) quaternary ammonium conditioning agent, Cetyl alcohol. BTMS C7550KC is dissolved in alcohol and dispersed in warm water. BTMS C7550KC is an exceptionally effective cationic self-emulsifying wax. It is used as strong hair conditioning agent, antistatic agent and softening agent. It can be used in hair conditioners, hair mist and hair essence as well as other hair related products. Also, it has good compatibility with other cationic and nonionic surfactants. It reacts with anionic surfactants by forming electro-neutral salts. It's soluble in water but stable solutions can be obtained by using an excess of an anionic compound. Natural, eco-friendly. Natural Origin Index (ISO 16128) - 0.821.

BTMS D7570KC

ingredients

BTMS D7570KC is a cationic surfactant with a conditioning effect. It is ideal for use in hair care applications including conditioners, detanglers, hair relaxers, and hair removal products. Compliance Highlights Available

BTMS E7550KC

ingredients

BTMS E7550KC is a pelletized 50% active Behenyl(derived from the rape seed oil) quaternary ammonium conditioning agent, Cetyl alcohol & Stearyl alcohol. It is used in both leave-on and rinse-off hair conditioners having oustanding antistatic & softening effects. It can be used in hair conditioners, hair mist and hair essence as well as other hair related products. This product is exceptionally mild and non-irritant, used in various formulations including leave-on skin care products.

BTMS P8580KC

ingredients

BTMS P8580KC is a pelletized 80% active Behenyl(derived from the rape seed oil) quaternary ammonium conditioning agent, Isopropyl alcohol. BTMS P8580KC is dissolved in alcohol and dispersed in warm water. BTMS P8580KC is an exceptionally effective cationic self-emulsifying wax. It is used as strong conditioning agent, antistatic agent and softening agent. It has good compatibility with other cationic and nonionic surfactants. It reacts with anionic surfactants by forming electro-neutral salts. It's soluble in water but stable solutions can be obtained by using an excess of an anionic compound.

Canola 100KC

ingredients

Canola 100KC is excellent emollient and odorless vegetable oil. It has moisturizing properties, excellent skin conditioning effect and cost effective oil. It contains the rich omega-3, omega-6 and omega-9 fatty acids as good source for tocopherols and phytosterols, components offering both antioxidant activity and bioactivity for skin care applications.

Polyquta 125KC

ingredients

Polyquta 125KC (PQ-10) is derived from natural cellulose, and gives excellent conditioning effect to hair. It can be formulated for clear shampoos. It has viscosity range between 75 and 175 cps in a 2% aqueous solution. Compliance Highlights Available

Polyquta 3000KC

ingredients

Polyquta 3000KC (PQ-10) is derived from natural cellulose, and gives excellent conditioning effect to hair. It can be formulated for clear shampoos. It has viscosity range between 1,000 and 2,500cps in a 1% aqueous solution. Compliance Highlights Available

Polyquta 400KC

ingredients

Polyquta 400KC (PQ-10) is derived from natural cellulose, and gives excellent conditioning effect to hair. It can be formulated for clear shampoos. It has viscosity range between 300 and 500cps in a 2% aqueous solution. Compliance Highlights Available

Polyquta HR3000KC

ingredients

Polyquta HR3000KC is a functional material cationic polymerized with hydroxyethyl cellulose. It enhanced the appearance and feel of hair, by increasing hair body by improving the texture of hair that has been damaged physically or by chemical treatment because it provides strong conditioning effect by being absorbed on the hair. Viscosity range is 1,000-2,000cPs in a 1% aqueous solution.

Polyquta LR3000KC

ingredients

Polyquta LR3000KC(PQ-10) is derived from natural cellulose, and gives excellent conditioning effect to hair. It can be formulated for clear shampoos. It has viscosity range between 1,000 and 2,500cps in a 1% aqueous solution. Compliance Highlights Available

Polyquta LR400KC

ingredients

Polyquta LR400KC(PQ-10) is derived from natural cellulose, and gives excellent conditioning effect to hair. It can be formulated for clear shampoos. It has viscosity range between 300 and 500cps in a 2% aqueous solution. Compliance Highlights Available

Preser 150KC

ingredients

Preser 150KC is highly effective antimicrobial agent recommended to use as a preservative in almost cosmetics and toiletry products. Compliance Highlights Available

PreserGreen

ingredients

PreserGreen is an eco - friendly antimicrobial agent designed for preservative -free personal care and cosmetic formulations . Derived entirely from natural fatty acids and validated with a Natural Origin Index of 1.0, it offers a sustainable alternative to conventional synthetic preservatives . Its mild, non -toxic formula has demonstrated very low irritation levels in skin patch tests, making it suitable for sensitive skin applications . Ideal for products such as shampoos, shower gels, and other rinse - off formulations.

Resin KHP

ingredients

Resin KHP is a polymer derived from toluene-sulfonamide and formaldehyde. It works as a film former, plasticizer, suspending agent. Compliance Highlights Available

STAC 808KC

ingredients

STAC 808KC is the quaternary ammonium salt. It works as antistatic agent, hair conditioning agent. Compliance Highlights Available

STAC 80KC

ingredients

STAC 80KC is a quaternary ammonium salt. It works as antistatic agent and hair conditioning agent. Compliance Highlights Available

Sunflower 100KC

ingredients

Sunflower 100KC is excellent emollient and odorless vegetable oil. It has moisturizing properties, excellent skin feel. Especially recommended in sun care products due to its goods oxidation stability. Compliance Highlights Available

CEH 100KC

ingredients

CEH 100KC is an ester of cetyl alcohol and 2-ethylhexanoic acid. It works as a skin conditioning agent. Compliance Highlights Available

Coconut 100KC

ingredients

Coconut 100KC is excellent emollient and odorless vegetable oil. It has moisturizing properties and excellent skin/hair conditioning effect. It helps to improve skin elasticity and collagen production. Compliance Highlights Available

CTAC 25KC

ingredients

CTAC 25KC is a quaternary ammonium salt. It works as an antistatic agent, cosmetic biocide, surfactant-emulsifying agent. Compliance Highlights Available

CTAC 30KC

ingredients

CTAC 30KC is a quaternary ammonium salt. It works as an antistatic agent, cosmetic biocide, surfactant-emulsifying agent. Compliance Highlights Available

CTAC 60KC

ingredients

CTAC 60KC is a quaternary ammonium salt. It works as an antistatic agent, cosmetic biocide, surfactant-emulsifying agent. Compliance Highlights Available

Encapguard™ Cera FS

ingredients

Encapguard™ Cera-FS utilizes an Elastic Liposome delivery system to stabilize Ceramide NP, a critical component of the skin barrier. Ceramide is essential for maintaining skin health but is challenging to incorporate into formulations due to its low water solubility and tendency to recrystallize. To address this issue, we have encapsulated ceramide within Elastic Liposome-lipid based nanovesicles that enhance its stability. This advanced formulation improves ceramide's water dispersibility and boosts skin permeability, making it especially suitable for oil-in-water (O/W) skincare formulations.

Encapguard™ Cera P 50 Complex

ingredients

Encapguard™ Cera-P 50 Complex utilizes a Nano vehicles delivery system to stabilize Ceramides, a critical component of the skin barrier. Ceramide is essential for maintaining skin health but is challenging to incorporate into formulations due to its low water solubility and tendency to recrystallize. To address this issue, we have encapsulated ceramide within nano vesicles that enhance its stability. This advanced formulation improves ceramide's water dispersibility and boosts skin permeability, making it especially suitable for oil-in-water (O/W) skincare formulations.

Encapguard™ Cera-C 5

ingredients

Encapguard™ Cera-C 5 utilizes a Cubosome delivery system to stabilize Ceramide NP, a critical component of the skin barrier. Ceramide is essential for maintaining skin health but is challenging to incorporate into formulations due to its low water solubility and tendency to recrystallize. To address this issue, we have encapsulated ceramide within Cubosome—nanovesicles that enhance its stability. This advanced formulation improves ceramide's water dispersibility and boosts skin permeability, making it especially suitable for oil-in-water (O/W) skincare formulations.

Encapguard™ Cera-E 10

ingredients

Encapguard™ Cera-E 10 utilizes a Emulsion delivery system to stabilize Ceramide NP, a critical component of the skin barrier. Ceramide is essential for maintaining skin health but is challenging to incorporate into formulations due to its low water solubility and tendency to recrystallize. To address this issue, we have encapsulated ceramide within Emulsion—nanovesicles that enhance its stability. This advanced formulation improves ceramide's water dispersibility and boosts skin permeability, making it especially suitable for oil-in-water (O/W) skincare formulations.

Encapguard™ Cera-FS 5

ingredients

Encapguard™ Cera-F 5 utilizes an Elastic Liposome delivery system to stabilize Ceramide NP, a critical component of the skin barrier. Ceramide is essential for maintaining skin health but is challenging to incorporate into formulations due to its low water solubility and tendency to recrystallize. To address this issue, we have encapsulated ceramide within Elastic Liposome — lipid based nanovesicles that enhance its stability. This advanced formulation improves ceramide's water dispersibility and boosts skin permeability, making it especially suitable for oil-in-water (O/W) skincare formulations.

Encapguard™ Cera-LNP 5

ingredients

Encapguard™ Cera-LNP 5 utilizes a LNP (Lipid Nano Particle) delivery system to stabilize Ceramide NP, a critical component of the skin barrier. Ceramide is essential for maintaining skin health but is challenging to incorporate into formulations due to its low water solubility and tendency to recrystallize. To address this issue, we have encapsulated ceramide within Liposomes—lipid-based nanovesicles that enhance its stability. This advanced formulation improves ceramide's water dispersibility and boosts skin permeability, making it especially suitable for oil-in-water (O/W) skincare formulations.

Encapguard™ Cera-S

ingredients

Encapguard™ Cera-S utilizes a Liposome delivery system to stabilize Ceramide NP, a critical component of the skin barrier. Ceramide is essential for maintaining skin health but is challenging to incorporate into formulations due to its low water solubility and tendency to recrystallize. To address this issue, we have encapsulated ceramide within Liposomes—lipid-based nanovesicles that enhance its stability. This advanced formulation improves ceramide's water dispersibility and boosts skin permeability, making it especially suitable for oil-in-water (O/W) skincare formulations.

Encapguard™ ON-Retinol

ingredients

Encapguard™ ON-Retinol utilizes an anionic delivery system to stabilize Retinol, a key active for anti-wrinkle skincare. We chemically stabilized the terminal groups of Retinol via ionic interactions, thereby enhancing resistance to light, heat, and oxidative stress. By encapsulating Retinol within nano vesicles, this advanced formulation enhances stability, improves water dispersibility, increases skin penetration, and reduces irritation. In addition, it is free from BHT, BHA, and PEG, making it suitable for clean beauty formulations. It provides an efficient ingredients system suitable for oil-in-water (O/W) skincare formulations.

FOS 75KC

ingredients

FOS 75KC is a sugar found in various fruits and vegetables in nature and it is produced through enzyme reactions made from sugar. This material has excellent moisturizing power, which is the basic effect of sugars, and can be applied to sun care products without discomfort, so it is highly applicable to overall cosmetic ingredients.

GEH 300KC

ingredients

GEH 300KC is an ester of glycerin and 2-ethylhexanoic acid. It works as a skin/hair conditioning agent, solubilizer, film former, emollient, lubricant, masking, refatting, solvent, anti-static,antiaging, fragrance. Compliance Highlights Available

Glyco 171KC

ingredients

Glyco 171KC is effective liquid thickening agent for shampoo and bath preparations. It works as thickener for surfactant system. Compliance Highlights Available

Guarquat BF130KC

ingredients

Guarquat BF130KC is a quaternary ammonium derivative of Hydroxypropyl Guar and boron free product. It works as an antistatic agent, hair conditioning agent, skin-conditioning agent, viscosity increasing agent. Compliance Highlights Available

Guarquat C130KC

ingredients

Guarquat C130KC is a quaternary ammonium derivative of Hydroxypropyl Guar. It works as an antistatic agent, hair conditioning agent, skin-conditioning agent, viscosity increasing agent. Compliance Highlights Available

Guarquat C140KC

ingredients

Guarquat C140KC is a quaternary ammonium derivative of Hydroxypropyl Guar. It works as an antistatic agent, hair conditioning agent, skin-conditioning agent, viscosity increasing agent. Compliance Highlights Available

Guarquat C170KC

ingredients

Guarquat C170KC is natural guar based conditioning polymer and recommended for use in a full range of conditioning features. Guarquat C170KC is a highly charged cationic plant-derived polymer. It provides not only excellent wet/dry combing, thickening and soft feel to hair but also excellent thickening and conditioning properties for hair and skin care products and improves active deposition onto hair.

Guarquat C500KC

ingredients

Guarquat C500KC is natural guar based conditioning polymer and recommended for use in a full range of conditioning features. Guarquat C500KC is the obvious choice for formulators who want to create weightless volume shampoos that give fine hair unmatched body and silkiness.

Guarquat CP500KC

ingredients

Guarquat CP500KC is a cationic derivative of Hydroxypropyl Guar with good substantivity to skin and hair. It can be applied for transparent formulations. It benefits moderate conditioning to hair, excellent foam density, and improves wet and dry combability and provides a pleasant soft dry hair feel. This product imparts an excellent skin feel and enhances foam sensorial attributes, ideally being suitable for skin cleansing formulation. It's used for bath and shower gels, liquid and syndet or combo bars, and provides protection and a soft feel to the skin.

Guarquat DF140KC (Boron Free)

ingredients

Guarquat DF140KC (Boron Free) is natural guar based conditioning polymer and recommended for use in a full range of conditioning features. Guarquat DF140KC provides excellent wet/dry combing, thickening and soft feel to hair and is suitable for daily shampoos and is dispersant free product.

Guarquat H140KC

ingredients

Guarquat H140KC is a quaternary ammonium derivative of Hydroxypropyl Guar. It works as an antistatic agent, hair conditioning agent, skin-conditioning agent, viscosity increasing agent. Compliance Highlights Available

Guarquat HP105KC

ingredients

Guarquat HP105KC is a non-ionic, natural guar-based polymer that performs effectively at low concentrations. It can also be used in transparent formulations, offering excellent compatibility with cationic surfactants and stability across a broad pH range. Additionally, Guarquat HP105KC enhances formula thickening while providing a distinctive smooth feel in wet applications.

Guarquat L80KC

ingredients

Guarquat L80KC is a quaternary ammonium derivative of Hydroxypropyl Guar. It works as an antistatic agent, hair conditioning agent, skin-conditioning agent, viscosity increasing agent. Compliance Highlights Available

Guarquat NT500KC

ingredients

Guarquat NT500KC is a cationic derivative of Hydroxypropyl Guar with good substantivity to skin and hair. It can be applied for transparent formulations. It benefits moderate conditioning to hair, excellent foam density, and improves wet and dry combability and provides a pleasant soft dry hair feel. This product imparts an excellent skin feel and enhances foam sensorial attributes, ideally being suitable for skin cleansing formulation. It's used for bath and shower gels, liquid and syndet or combo bars, and provides protection and a soft feel to the skin.

HL 100KC

ingredients

HL 100KC is an ester of hexyl alcohol and lauric acid. It works as a skin-conditioning agent. Compliance Highlights Available

Hydantol 55KC

ingredients

Hydantol 55KC is a preservative used for cosmetics and soluable in water, alcohols and acetone. Compliance Highlights Available

Hydrojel CGKC

ingredients

Hydrojel CGKC has been marketed to the cosmetic industry as a moisturizing base. This moisturizer also gives rheological properties as well as aesthetics to cosmetic creams, lotions and other personal care products as a unique moisturizer. Compliance Highlights Available

Hydrojel DPFKC

ingredients

Hydrojel DPFKC has been marketed to the cosmetic industry as a moisturizing base. This moisturizer lends rheological qualities as well as aesthetics to cosmetic creams, lotions and other personal care products as a unique moisturizer. It is used in various skin care applications such as mask pack, skin moisturizer, suncare products, skin toner, body lotion, body cream, skin lotion, skin cream, cleansing gel, eye cream, eye lotion, eye gel, soothing gel, and other leave-on products. Natural, eco-friendly. Natural Origin Index (ISO 16128) - 0.97.

Hydrojel DVKC

ingredients

Hydrojel DVKC has the highest viscosity among all grades of Hydrojel series. It is used for various kinds of personal care products to acquire rheology, moisturization and sensory feel. The high yield value of Hydrojel DVKC contributes to stabilize emulsion and suspend compatible material.

Hydrojel MPFKC

ingredients

Hydrojel MPFKC is paraben free version of Hydrojel MSKC containing 1,2-Hexanediol. It is safe, clear, multi-fuctional, skin-activated moisturizing gel that delivers a multitude of benefits. Compliance Highlights Available

Hydrojel OILPFKC

ingredients

Hydrojel OILPFKC is paraben free version of Hydrojel OILKC, containing 1,2-Hexanediol instead of paraben. Hydrojel OILPFKC is an excellent moisture-balancing agent, its most noted property is its remarkably similar feel to silicone oils. This unique property is due to the complex between the two copolymers. Hydrojel OILPFKC is an excellent lubricant and lends such characteristics as spreadability, moisturization and silky after-feel to creams, lotions and sun care products.

Hydrojel PFKC

ingredients

Hydrojel PFKC has been marketed to the cosmetic industry as a moisturizing base. Hydrojel PFKC is a preservative free version of Hydrojel CGKC and therefore has physical and cosmetic properties similar to Hydrojel CGKC. This moisturizer also lends rheological qualities as well as aesthetics to cosmetic creams, lotions and other personal care products as a unique moisturizer.

Hydroquat 510BHKC

ingredients

Hydroquat 510BHKC (PQ-51), which has a phosphoryl choline structure mimicking the cell membrane of corneocyte, is an innovative cosmetic ingredient that upgrades the quality of cosmetics by improving skin barrier function, moisturizing, sensory effect and skin adhesion. Hydroquat 510BHKC is a colorless transparent liquid product contained 5% of Polyquaternium-51 as active key ingredient.

Hydroquat 510HDKC

ingredients

Hydroquat 510HDKC (PQ-51) is a biocompatible phospholipid copolymer which is polymerized from Butylmeth-acrylate with 2-methacryloyloxyethyl phosphoryl choline (MPC) which has a same structure to human cell membrane called phospholipid. Compliance Highlights Available

Hydroquat 510KC

ingredients

Hydroquat 510KC (PQ-51) is a biocompatible phospholipid copolymer which is polymerized from Butylmeth-acrylate with 2-methacryloyloxyethyl phosphoryl choline (MPC) which has a same structure to human cell membrane called phospholipid. Compliance Highlights Available

Hydroquat 510NPKC

ingredients

Hydroquat 510NPKC (PQ-51), which has a phosphory choline structure mimicking the cell membrane of corneocyte, is an innovative cosmetic ingredient that upgrades the quality of cosmetics by improving skin barrier function, moisturizing, sensory effect and skin adhesion. Hydroquat 510NPKC is a sterile, colorless transparent liquid product without additive contained 5% of Polyquaternium-51 as active key ingredient.

Icare B50KC

ingredients

Icare B50KC (PQ-51) is a sterilized colorless transparent aqueous solution without preservatives used as an additive to contact lens storage solutions and cleaning solutions. Icare B50KC contains a safe bio-mimetic polymer with a similar chemical structure to the human cell membrane, and it coated on contact lens to improves the moisturizing effect and inhibits the adsorption of proteins, giving comfort to eyes even when wear for a long time.

Icare M100KC

ingredients

Icare M100KC (MPC (2-Methacryloyloxyethyl Phosphorylcholine)) is an acrylate monomer that has a structure similar to that of Phosphorylcholine, which is a bilayer structure of human cells. The polymer containing MPC can be obtained by a simple radical polymerization reaction. The polymer containing MPC has characteristics of biocompatibility, hemo-compatibility, super moisturization, anti-protein-adsorption, and good skin affinity. It is applied to various fields such as medical devices, cosmetics, contact lens, cell-culture tools. Benefits for Contact Lens : Increases water contents, Increases surface wettability, Decreases frictional force, Suppression of protein adsorption, Good fitting sense.

ININ 100KC

ingredients

ININ 100KC is an ester of a branched chain nonyl alcohol with a branched chain nonanoic acid. It works as a skin-conditioning agent. Compliance Highlights Available

KAMPHO BT30

ingredients

KAMPHO BT30 is a high-foaming and mild surfactant. Excellent foam and viscosity building with anionic systems. Thickener with antistatic property for hair shampoos, hand soaps, shower gels and pet shampoos. Compliance Highlights Available

KAMPHO ST40

ingredients

KAMPHO ST40 is the zwitterion (inner salt) that conforms to the formula. KAMPHO ST40 is applied to shampoo and cleansing products. Compliance Highlights Available

KANION AOS35

ingredients

KANION AOS35 is an aqueous Sodium C14-C16 Olefin sulfonate. KANION AOS35 is used in shampoos, bath products, and skin-cleansing products. It provides emulsifying, foaming, and surfactant properties. Compliance Highlights Available

Kleensolve™ DMI

ingredients

Kleensolve™ DMI is an eco-friendly ingredient from plant(corn) origin. It is a colorless clear liquid product which boosts the performance active ingredients within formulations for various personal care applications. Compliance Highlights Available

LTAC 20KC

ingredients

LTAC 20KC is a quaternary ammonium salt. It works as an antistatic agent, conditining agent for hair care and detergent. Compliance Highlights Available

Maltitol 70KC

ingredients

Maltitol 70KC is a sugar-alcohol moisturizing agent that makes the skin feel stable and moisturized and smooth. It is a raw material with high human stability enough to be used as a food ingredient, and has high moisture persistence, so it can hold moisture from the skin.

Medicare M100KC

ingredients

Medicare M100KC (MPC monomer) is an acryl monomer containing the same phosphoryl choline functional group as in the human cell membrane in its structure. It can be synthesized into MPC polymers having a structure similar to that of a human cell membrane having a phosphoryl choline functional group by using a free radical reaction. The MPC polymers containing a phosphoryl choline structure have properties such as biocompatibility, moisturizing properties, non-adsorption property to proteins and bacteria.

Methyl Gluceth DOE 120KC

ingredients

Methyl Gluceth DOE 120KC is a natural sourced non ionic and mild viscosity builder, derived from natural sugars. It can be used in various surfactant formulations because of its excellent thickening characteristic. It has a stable thickening effect in a wide range of pH and can remain transparent. With its mild and soft feeling features, it is widely used in various applications such as skin lotion, skin cream, skin conditioner, clear shampoo, pearlescent shampoo, anti-dandruff shampoo, bath gel, cleansers and even baby care products.

Methyl Gluceth E10KCH

ingredients

Methyl Gluceth E10KCH is a poly-ethylene glycol ether of methyl glucose. It works as a skin-conditioning agent. Compliance Highlights Available

Methyl Gluceth E20KC

ingredients

Methyl Gluceth E20KC is a poly-ethylene glycol ether of methyl glucose. It works as a skin-conditioning agent. Compliance Highlights Available

Multicare AM50KCS

ingredients

Multicare AM50KCS is a pre-neutralized polymer in ready to use liquid form (water in oil emulsion). It is a rheology modifier working as a thickener, and as an emulsifier (stabilizer). It make gels, cream-gels and emulsions easily under very moderate shear at cold temperature. This product is recommended for skin creams, moisture preparations, bath preparations, skin, hair, sun care and make-up; baby care, lubrication products, cleansing lotion, and gels.

Multicare HA100LKC

ingredients

Multicare HA100LKC is the pre-neutralized multifunctional and powdery polymer in cosmetics produced by inverse emulsion polymerization. It is not only a thickening agent, but also an excellent stabilizer and sensory benefits agent effective over a wide pH range. It is used to develop formulas of any consistency, with a fresh and satin skin feel.

Multicare HA40KC

ingredients

Multicare HA40KC is a copolymer of sodium hydroxyethyl acrylate and acryloyldimethyl taurate monomers. It is a rheology modifier working as a emulsion stabilizer, opacifying agent, suspending agent-nonsurfactant, viscosity increasing agent-aqueous. Compliance Highlights Available

Multicare IAM50KC

ingredients

Multicare IAM50KC is the pre-neutralized multifunctional and liquid polymer in cosmetics produced by inverse emulsion polymerization. It is not only a thickening agent, but also an excellent stabilizer and sensory benefits agent effective over a wide pH range. It is used to develop formulas of any consistency, with a rich and soft skin feel.

Multicare IHA40KC

ingredients

Multicare IHA40KC is very easy to use, just add to your formulation after mixing oil and water phases to enhance stability and modify rheology. Multicare IHA40KC is convenient emulsifier, rheology modifier, thickener, and acting as a stabilizer. It make gel and cream easily and don’t need to neutralize. It acts as a very good pigment dispersant and emulsifies various kinds of oil and pigment. Multicare IHA40KC can be used to cold process as liquid form.

Multicare MP100KC

ingredients

Multicare MP100KC is a patented W/O emulsion thickener in powder form. It is composed of a unique sodium acryloyl dimethyl taurate based polymer and a natural sustainable EO free surfactant. Compliance Highlights Available

Multicare MP40KC

ingredients

Multicare MP40KC is an innovative emulsifying-thickening polymeric water in oil emulsion for skin/sun/hair/make-up products. It is safe substance using non-toxic natural ingredients which is free of acrylamide, acrylamide derivatives and ethylene oxide. It is ready to use, pre-neutralized polymer working at a wide range of pH. This product is recommended for skin creams, moisture preparations, bath preparations, skin, hair, sun care and make-up; baby care, lubrication products, cleansing lotion, and gels.

Multicare ST45KC

ingredients

Multicare ST45KC is a copolymer of sodium acrylate and sodium acryloyldimethyltaurate monomers. It is a rheology modifier working as a antistatic agent, emulsion stabilizer, film former, opacifying agent, suspending agent, viscosity controlling agent, viscosity increasing agent.

Neoquta 3000KC

ingredients

Neoquta 3000KC(PQ-10) is derived from natural cellulose, and gives excellent conditioning effect to hair and granule type of Polyquta3000KC. It can be formulated for clear shampoos. Compliance Highlights Available

Neoquta 400KC

ingredients

Neoquta 400KC(PQ-10) is derived from natural cellulose, and gives excellent conditioning effect to hair and granule type of Polyquta 400KC. It can be formulated for clear shampoos. Compliance Highlights Available

NPDC 200KC

ingredients

NPDC 200KC is a Ester Oil, Emollient & Moisturizer. It is ideal for use in a wide range of applications, including skin serums and creams, cleansing lotions, sun care, lipsticks, and make-up bases. Compliance Highlights Available

ODM 100KC

ingredients

ODM 100KC is an ester of octyldodecanol(q.v.) and myristic acid. It works as a skin-conditioning agent. Compliance Highlights Available

PETEH 400KC

ingredients

PETEH 400KC is an ester of pentaerythritol and 2-ethylhexanoic acid. It works as a skin-conditioning agent. Compliance Highlights Available

PGL 103KC

ingredients

PGL 103KC is a glycerin polymer containing 3 glycerin units. It works as a skin-conditioning agent. Compliance Highlights Available

PGL 110KC

ingredients

PGL 110KC is a glycerin polymer containing 10 glycerin units. It works as a skin-conditioning agent. Compliance Highlights Available

PGL 202KC

ingredients

PGL 202KC is a fully natural humectant with outstanding water retention capabilities. Compared to glycerin, PGL 202KC exhibits superior moisture-absorbing characteristics, allowing water to stay in the stratum corneum for an extended period, leading to a more consistent moisturizing effect. It works as a skin-conditioning agent, applied to various formulations such as skin care gels, creams, face mask, hand sanitizer, and even hair conditioners. Natural, eco-friendly. Natural Origin Index (ISO 16128) - 1.00.

PGLCP 102KC

ingredients

PGLCP 102KC is a synthetic compound derived from polyglycerin and a fatty acid. The compound is vegetable in origin, making it biodegradable & toxicologically safe. It is commonly used as an emulsifier in cosmetic formula having excellent skin feeling properties bucause of its high substantiality and skin smoothening effect. This product creates fine, creamy bubbles, especially when combined with anionic surfactants. It is an excellent thickener with good thermostable viscosity. PGLCP 102KC can be used as deoactive ingredient bucause of its reaction to gram-positive bacteria.

PGLIS 102KC

ingredients

PGLIS 102KC is a natural sourced emulsifier. It is ideal for use in lip sticks, lip tints, lip gloss, and other make-up applications. Compliance Highlights Available

PGLIS 203KC

ingredients

PGLIS 203KC is a natural sourced emulsifier. It is ideal for use in skin care and make up applications. Compliance Highlights Available

PGLIS 302KC

ingredients

PGLIS 302KC is an ester of diglycerin and isostearic acid. It works as a skin-conditioning agent, excellent dispersing agent for pigment. Compliance Highlights Available

PGLLA 110KC

ingredients

PGLLA 110KC is a natural sourced emulsifier. It is ideal for use in skin care, cleansing oils/waters, and facial mask applications. Compliance Highlights Available

PGLLA 110KC-Plus

ingredients

PGLLA 110KC-Plus is a plant-derived, PEG-free nonionic surfactant designed for excellent skin compatibility. It functions primarily as a superior natural solubilizer, making it ideal for transparent formulations such as toners, mists, and facial masks. With an HLB value of approximately 16-18, it effectively stabilizes essential oils and active ingredients in water-based systems across a broad pH range. A key advantage is its cold processability, which enhances manufacturing efficiency by saving time and money. It is widely used in various skin-care products for its mild and gentle properties.

PGLLA 210KC

ingredients

PGLLA 210KC is a plant-derived, PEG-free natural sourced emulsifer. It is stable under a broad pH range with good forming ability as a natural solubilizer (HLB 12-14). It is used in various skin care formulations, such as cleansing foams and face masks. Compliance Highlights Unavailable

PGLOL 102KC

ingredients

PGLOL 102KC is a natural sourced emulsifier. It is ideal for use in skin care, make-up, and cleansing applications. Compliance Highlights Available

PGLOL 110KC

ingredients

PGLOL 110KC is a natural sourced emulsifier. It is ideal for use in skin care, make-up, and mask applications. Compliance Highlights Available

Phosphomer® CelloPC401CNKC

ingredients

Phosphomer® CelloPC401CNKC is a low viscosity, highly conditioner/moisturizer in a broad range of skin care products. This water soluble modified cellulosic is substantive to skin, and provides such aesthetic benefits as excellent conditioning, moisturize and a smooth feel.

Phosphomer® CelloPC40CNKC

ingredients

Phosphomer® CelloPC40CNKC is a low viscosity, highly conditioner/moisturizer in a broad range of skin care products. This water soluble modified cellulosic is substantive to skin, and provides such aesthetic benefits as excellent conditioning, moisturize and a smooth feel.

Phosphomer® CEM510CNKC

ingredients

Phosphomer® is a registered trade name of KCI’s brand new cosmetic raw materials based on biomimetic technology. Phosphomer® CEM510CNKC is a mixture of Carbomer and Polyphosphorylcholine glycol acrylate which has lots of unique characteristics due to their molecular net structure and biomimetic nature. It is an excellent rheology modifier and effective skin barrier function enhancer.

Phosphomer® ST610CNKC

ingredients

Phosphomer® is a registered trade name of KCI’s brand new cosmetic raw materials based on biomimetic technology. Phosphomer® ST610CNKC is an effective suspending and stabilizing agent for use in specialty shampoos includes antidandruff shampoo, conditioning shampoo. It is also an excellent thickener and light gellant for systems containing electrolytes. It has lots of unique characteristics due to their molecular net structure and biomimetic nature. It is an excellent rheology modifier and effective skin barrier function enhancer.

Piroctol KC

ingredients

Piroctol KC is a anti-dandruff & scalp care agent. It is very effective in treating dandruff and preventing hair loss. It has antifungal properties and limits the growth of Malassezia furfur fungus, which is the cause of dandruff. It is highly soluble in surfactant systems and contributes to the viscosity of the formulation. Until recently, the most commonly used ingredient to treat dandruff and seborrheic dermatitis was zinc pyrithione. However, as zinc pytithione has been designated as a CMR subbstance of category 1B (toxic for reproduction), Piroctol KC has become the best alternative. It is used mainly in anti-dandruff shampoo and also in other hair care formulations as well as anti-acne formulations.

Polyester Resin 70KC

ingredients

Polyester Resin 70KC is a copolymer of adipic acid, neopentyl glycol and trimellitic anhydride monomers. It works as a film former. Compliance Highlights Available

Polyquat 640KC

ingredients

Polyquat 640KC(PQ-6) is an aqueous solution of the highly charged cationic homopolymer of diallyldimethyl ammonium chloride. It has a good water solution stability, it doesn’t become gel and keeps stable in the wide PH range. It can be applied for hair and skin care products.

Polyquat L420KC

ingredients

Polyquat L420KC(PQ-4) is cationic cellulosic polymer with Dially dimethyl ammonium chloride. It's excellent for skin and hair care products. It acts as a good effective thickener for hair mousses and setting lotions. It has good combability, gloss and antistatic property.

Polyquta 1000KC

ingredients

Polyquta 1000KC(PQ-10) is derived from natural cellulose, and gives excellent conditioning effect to hair. It can be formulated for clear shampoos. It has viscosity range between 1,000 and 1,400cps in a 1% aqueous solution. Compliance Highlights Available

FOR MATERIAL SUPPLIERS

Put your materials in front of formulators.

Give product developers the specs, certifications, and sample path they need to shortlist your grades.

Talk to our team
Formulation scientist ready to help suppliers reach product developers