Home / Personal Care & Cosmetics / Suppliers / KCC Beauty
Personal Care & Cosmetics
KCC Beauty
KCC Beauty lists 76 grades in Personal Care & Cosmetics. The sheets saved on this site are below.
Grades from KCC Beauty
Clear Conditioning Shampoo (Formulation #CS-10)
This clear shampoo has been formulated to offer high conditioning. Functional silicone products like SeraShine EM 401C (Silicone Quaternium-17 (and) C11-15 Pareth-5 (and) C11-15 Pareth-9) can encourage deposition at the more damaged areas of the hair shaft where more intense conditioning is required. The ultrafine particle size of SeraShine EM 401C enables effective conditioning without affecting the clarity of the shampoo.
Clear Conditioning Shampoo (Formulation #CS-9)
This clear shampoo has been formulated to offer high conditioning. Amino functional silicone products like SeraShine EM 302C (Amodimethicone (and) C11-15 Pareth-5 (and) C11-15 Pareth-9) can encourage deposition at the more damaged areas of the hair shaft where more intense conditioning is required. The ultrafine particle size of SeraShine EM 302C enables effective conditioning without affecting the clarity of the shampoo.
Clear Moisture Gel - D5 Free (Formulation #FM-1-D5F)
This cold-processable, crystal clear gel leaves skin with a silky soft, non-greasy feel. Perfect as a foundation primer. SeraSilk EL 64 (Dimethicone (and) Dimethicone/Vinyl Dimethicone Crosspolymer) is a highly viscous gel which gives a dry skin feel, leaving no residue. SeraSense GB 12 (Dimethicone (and) Dimethiconol) aids speading and provides softness. SeraSense SF PTM (Phenyl Trimethicone) is an emollient and water repellent.
Clear Moisture Gel (Formulation #FM-1)
This cold-processable, crystal clear gel leaves skin with a silky soft, non-greasy feel. Perfect as a foundation primer. SeraSilk EL 60 (Cyclopentasiloxane (and) Dimethicone/Vinyl Dimethicone Crosspolymer) is a highly viscous gel which gives a dry skin feel, leaving no residue. SeraSense GB 10 (Cyclopentasiloxane (and) Dimethiconol) aids speading and provides softness. SeraSense SF PTM (Phenyl Trimethicone) is an emollient and water repellent.
Clear Moisturising Shampoo (Formulation #CS-8)
This clear high conditioning shampoo contains SeraShine EM 501C (Phenyl Trimethicone (and) Silicone Quaternium-17). The functional silicone and improved deposition properties of SeraShine EM 501C give excellent gloss enhancing properties. The ultrafine particle size of this microemulsion enables effective conditioning without weighing the hair down or affecting the clarity of the shampoo.
Clear Sulfate-Free Shampoo (Formulation #CS-11)
This Clear Sulfate-Free Shampoo produces a thick, creamy foam and is very mild. SeraShine EM 204C (Dimethiconol (and) TEA-Dodecylbenzenesulfonate (and) Laureth-23) is a microemulsion which allows clear shampoos and offers conditioning for all hair types.
Colour Protect Shampoo (Formulation #OS-10)
The amino-functional emulsion SeraShine EM 301 (Amodimethicone (and) Trideceth-12 (and) Cetrimonium Chloride), is highly substantive to hair, therefore protecting hair from colour leaching when washing. It also leaves hair feeling soft, smooth and healthy.
Cream Blush (Formulation #CC-B-1)
This Cream Blush is based on the elastomer SeraSilk EL 60 (Cyclopentasiloxane (and) Dimethicone/Vinyl Dimethicone Crosspolymer), which adds viscosity and a powdery soft feel to the formulation. Upon application, the cream melts into the skin, spreading easily thanks to the addition of SeraSense SF PTM (Phenyl Trimethicone). SeraSense RB 19 (Dimethicone (and) Trimethylsiloxysilicate) is a resin which aids long lasting colour.
Creamy Lipstick (Formulation #CC-L-3)
In this creamy lipstick formulation, SeraSense SF PTM (Phenyl Trimethicone) gives a high gloss effect. SeraSense GB 10 (Cyclopentasiloxane (and) Dimethiconol) adds a silky soft feel and aids adhesion of colour to the lips. SeraSoft SW 70 (Stearyl Dimethicone) aids structure and compatibility of the raw materials as well as adding its own pleasant feel.
Daily Sun Protection Cream [SPF30,PA++] (Formulation #SUJ13F_008)
This light-feeling, waterproof sunscreen can also be used as a make-up base. SeraSense SF CM5 (Cyclopentasiloxane) allows fast absorption and a cool feeling. SeraSense SF 6 (Dimethicone) aids spreading and leaves the skin feeling moisturised. SeraSilk EL 61 (Dimethicone (and) Dimethicone/Vinyl Dimethicone Crosspolymer) gives the skin a silky smooth feel.
Deep Wrinkle Smoother (Formulation #AA-1)
This simple but effective formulation contains SeraSilk EL 60 (Cyclopentasiloxane (and) Dimethicone/Vinyl Dimethicone Crosspolymer) to smooth out deep wrinkles, such as crow’s feet, and give a powdery soft feel. SeraSense SF CM5 (Cyclopentasiloxane) improves the spreading of the formulation.
Detangling Cream for Kids (Formulation #CC-6)
This gentle detangling cream is light enough for use on kids’ hair. SeraSense G B 10 (Cyclopentasiloxane (and) Dimethiconol) ensures the comb slips through easily. The addition of SeraShine EM 301 (Amodimethicone (and) Trideceth-12 (and) Cetrimonium Chloride) provides excellent detangling and conditioning for even the curliest of hair.
Dual Phase Eye Make Up Remover (Formulation #EC-1)
This dual phase formulation blends together to remove all eye make up, including waterproof. SeraSense SF 2 (Dimethicone) cleanses oils away, whilst SeraSense CF CPM (Caprylyl Methicone) smoothes the eye area without tackiness.
Face & Neck Serum Crème (Formulation #AA-2)
This Face & Neck Serum Crème is a light, gel-like formulation. SeraSilk EL 60 (Cyclopentasiloxane (and) Dimethicone/Vinyl Dimethicone Crosspolymer) gives a dry, powdery feel. SeraSense GB 10 (Cyclopentasiloxane (and) Dimethiconol) leaves skin feeling silky soft without tackiness.
Face Cream (Formulation #FC-2)
In this facial cream formulation, SeraSense GB 10 (Cyclopentasiloxane (and) Dimethiconol) aids the spreading of actives and gives a silky soft feel.
Golden Glow Lip Gloss (Formulation #CC-L-9)
This glossy lip gloss gives a soft-feel and long-lasting colour, thanks to the addition of SeraSense GB 10 (Cyclopentasiloxane (and) Dimethiconol) and SeraSense RB 19 (Dimethicone (and) Trimethylsiloxysilicate).
Hair & Body Wash for Men (Formulation #HBW-1)
This simple hair & body wash utilises SeraSol SC 81 (PEG-12 Dimethicone) as a conditioning agent for skin and hair. This material is water-soluble and allows clear formulations. It also acts as a profoamer, helping to produce a dense, creamy foam.
Anti-Age Spot Hand Cream (Formulation #HC-1)
This Anti-Age Spot Hand Cream is a light, non-greasy formulation. SeraSense SF PTM (Phenyl Trimethicone) provides emolliency and water repellency, whereas SeraSense GB 11 (Cyclopentasiloxane (and) Dimethicone) gives a lovely silky soft, non-tacky skin feel.
Heat Defence Serum - D5 Free (Formulation #CC-7-D5F)
This cyclopentasiloxane-free serum is an oil-based leave-in formulation for wet or dry hair. The blend of silicone products smooth hair and give a healthy shine. SeraSense SF PTM (Phenyl Trimethicone) has a high refractive index, leaving hair with a high gloss. SeraSense SA 30 (Amodimethicone) protects from colour fade and heat styling.
Heat Defence Serum (Formulation #CC-7)
This serum is an oil-based leave-in formulation for wet or dry hair. The blend of silicone products smooth hair and give a healthy shine. SeraSense SF PTM (Phenyl Trimethicone) has a high refractive index, leaving hair with a high gloss. SeraSense SA 30 (Amodimethicone) protects from colour fade and heat styling.
High Gloss Hair Spritz (Formulation #CC-5)
This cuticle coat is an oil based leave-in formulation for application via a pump spray onto dry hair. The blend of silicone products smooth hair and promote a healthy shine.
High Gloss Serum - D5 Free (Formulation #CC-2-D5F)
This cyclopentasiloxane-free serum is an oil-based leave-in formulation for wet or dry hair. The blend of silicone products smooth hair and give a healthy shine. SeraSense SF PTM (Phenyl Trimethicone) has a high refractive index, leaving hair with a high gloss.
High Gloss Serum (Formulation #CC-2)
This serum is an oil-based leave-in formulation for wet or dry hair. The blend of silicone products smooth hair and give a healthy shine. SeraSense SF PTM (Phenyl Trimethicone) has a high refractive index, leaving hair with a high gloss.
Hydra Gel Cream [Water Drop] (Formulation #SJ13F_006)
This super-hydrating cream is lightweight giving a cool, watery feeling. SeraSol EL 92 (Dimethicone (and) Dimethicone/PEG-10/15 Crosspolymer) is brand new to the KCC Beauty range. It is an emulsifying elastomer, making it extremely stable. SeraSense SF 6 (Dimethicone) leaves skin feeling moisturised and soft.
Instant Wrinkle Corrector (Formulation #SJ13F_007)
The wrinkle reduction effect comes from a brand new product to the KCC Beauty range – SeraSense SP 13 (Dimethicone/Vinyl Dimethicone Crosspolymer). This is an easily dispersed powder which creates a soft focus effect and leaves the skin incredibly silky and smooth.
Intensive Hair Masque (Formulation #IT-1)
This rich intensive hair masque contains SeraShine EM 302C (Amodimethicone (and) C11-15 Pareth-5 (and) C11-15 Pareth-9). It is a functional silicone which provides deposition at the more damaged areas of the hair where more intense conditioning is required. SeraSense GB 11 (Cyclopentasiloxane (and) Dimethicone) lightly coats the hair, promoting smoothness and softness for healthy looking, shiny locks.
Lip Balm (Formulation #LB-1)
This lip balm gives a smooth, soft feel to the lips. SeraSense SF PTM (Phenyl Trimethicone) gives emolliency and gloss.
Long Lash Mascara (Formulation #CC-E-6)
This mascara formulation lengthens lashes. SeraSol SC 81 (PEG-12 Dimethicone) and SeraSense SF CM5 (Cyclopentasiloxane) are used for softness and lubricity. SeraSoft SW 70 (Stearyl Dimethicone) adds structure.
Long Lasting Hand Cream (Formulation #BJ13F_002)
BB Cream is foundation for the modern era. This light emulsion not only gives coverage but also moisturises, leaving skin feeling silky smooth and non-greasy, thanks to the addition of SeraSilk EL 60 (Cyclopentasiloxane (and) Dimethicone/Vinyl Dimethicone Crosspolymer).
Anti-Frizz Curl Cream (Formulation #CC-13)
This curl cream is light enough to be used on both wet and dry hair. SeraSense RB 19 (Dimethicone (and) Trimethylsiloxysilicate) is a resin blend which offers excellent anti-frizz properties and resistance to humidity. SeraSense GB 10 (Cyclopentasiloxane (and) Dimethiconol) ensures the cream spreads easily over the hair, whilst smoothing.
Anti-Hair Loss Leave-In Gel Conditioner (Formulation #CC-9A)
This lightweight gel conditioner is easily absorbed so can be used on both wet and dry hair. SeraShine EM 203 (Dimethiconol (and) TEA-Dodecylbenzenesulfonate) provides detangling and softness, whilst SeraShine EM 501C (Silicone Quaternium-17 (and) Phenyl Trimethicone (and) Laureth-4) gives smoothness and shine, leaving hair looking healthy and nourished.
Anti-Pollution Leave-In Gel Conditioner (Formulation #CC-9)
This lightweight gel conditioner is easily absorbed so can be used on both wet and dry hair. SeraShine EM 203 (Dimethiconol (and) TEA-Dodecylbenzenesulfonate) provides detangling and softness, whilst SeraShine EM 501C (Silicone Quaternium-17 (and) Phenyl Trimethicone (and) Laureth-4) gives smoothness and shine, leaving hair looking healthy and nourished with the added benefit of anti-pollution from the Polysaccharide AP.
Miracle Hair Oil - D5 Free (Formulation #IT-2-D5F)
The ultimate in hair conditioning. Cyclopentasiloxane-free Miracle Hair Oil contains an expert blend of silicones and coconut oil to provide the softest, shiniest hair imaginable. SeraSense GB 12 (Dimethicone (and) Dimethiconol) provides smoothess and softness. SeraSense RB 19 (Dimethicone (and) Trimethylsiloxysilicate) tames frizz and soothes dryness. SeraSense SF PTM (Phenyl Trimethicone) has a high refractive index, resulting in glossy tresses. This product has been specially formulated so it can be used three ways - on dry hair as a pre-shampoo treatment, or on both wet and dry hair post wash.
Miracle Hair Oil (Formulation #IT-2)
The ultimate in hair conditioning. Miracle Hair Oil contains an expert blend of silicones and coconut oil to provide the softest, shiniest hair imaginable. SeraSense GB 11 (Cyclopentasiloxane (and) Dimethicone) provides smoothess and softness. SeraSense RB 19 (Dimethicone (and) Trimethylsiloxysilicate) tames frizz and soothes dryness. SeraSense SF PTM (Phenyl Trimethicone) has a high refractive index, resulting in glossy tresses. This product has been specially formulated so it can be used three ways - on dry hair as a pre-shampoo treatment, or on both wet and dry hair post wash.
Moisture Facial Cream (Formulation #SJ13F_003)
This face cream is lightweight yet has a highly moisturising effect. SeraSense CM56 (Cyclopentasiloxane (and) Cyclohexasiloxane) gives a cooling effect and allows fast absorption. The blend of Dimethicone fluids provide a soft and velvety after feel. SeraSoft SW 72 (Bis-PEG-18 Methyl Ether Dimethyl Silane) is a soft wax which melts at body temperature, leaving the skin feeling moisturised.
Moisture Gel for Men (Formulation #SJ13F_004)
This oil and alcohol-free formulation gives a cool feeling to skin. SeraSense EM 61 (Dimethicone (and) Dimethicone/Vinyl Dimethicone Crosspolymer) smoothes the skin, without feeling tacky, also reducing pore size. SeraSense SF CM5 (Cyclopentasiloxane) aids spreading of the gel.
Pearlescent Conditioning Shampoo (Formulation #PS-3)
This pearlised high conditioning shampoo contains SeraShine EM 301 (Amodimethicone (and) Trideceth-12 (and) Cetrimonium Chloride) to provide all-round conditioning benefits such as detangling, softness and smoothness.
Pearlescent Nourishing Shampoo (Formulation #PS-2)
This pearlised high conditioning shampoo contains SeraShine EM 101 (Dimethicone (and) Isolaureth-6) to provide all-round conditioning benefits such as detangling, softness and smoothness. Functional silicone SeraShine EM 401C (Silicone Quaternium-17 (and) C11-15 Pareth-5 (and) C-11-15 Pareth-9) targets damaged areas, making this shampoo perfect for hair in need of repair.
Pore Cover Shining Primer (Formulation #MJ13F_009)
This Pore Cover Primer can be used before or after application of foundation. SeraSilk EL 63 (Cyclopentasiloxane (and) Dimethicone/Vinyl Dimethicone Crosspolymer) gives excellent pore cover and a velvety-soft feel. SeraSense SF 6 (Dimethicone) aids spreading of the product and leaves the skin feeling moisturised. SeraSense SF PTM (Phenyl Trimethicone) brightens the skin, giving a youthful appearance.
Protecting Hair Conditioner (Formulation #RC-10)
This creamy hair conditioner contains SeraShine EM 203 (Dimethiconol (and) TEA-Dodecylbenzenesulfonate), which provides all-round benefits for hair, including softness, shine and manageability.
Protecting Hair Conditioner (Formulation #RC-10A)
This creamy hair conditioner contains SeraShine EM 203 (Dimethiconol (and) TEA-Dodecylbenzenesulfonate), which provides all-round benefits for hair, including softness, shine and manageability. This formulation differs from RC-10 in that it uses Varisoft EQ65 instead of Incroquat Behenyl TMC-85.
Replenishing Hair Mask (Formulation #IT-3)
This thick, creamy mask is ideal for coarse and/or frizzy hair. SeraSense RB 19 (Dimethicone (and) Trimethylsiloxysilicate) is an excellent de-frizzer and wards against humidity. SeraSense SA 31 (Glucamidopropyl Amino Propyl Dimethicone) is new to the KCC Beauty range. It is highly substantive to the hair, making it ideal for deep conditioning formulations.
Shining Moisture Coating Serum (Formulation #HJ13F_001)
The combination of gum blends in this lightweight serum allows easy absorption into the hair. SeraSense SF PTM (Phenyl Trimethicone) adds shine, and SeraSense SA 30 (Amodimethicone) is highly substantive, protecting the hair from heat damage.
Shining Water (Formulation #CC-11)
This leave-in spray conditioner will leave the hair easy to comb and glossy, due to the addition of SeraShine EM 501C (Silicone Quaternium-17 (and) Phenyl Trimethicone (and) Laureth-4). SeraSol SC 81 (PEG-12 Dimethicone) also aids detangling. This formulation can also be used on dry hair as a light finishing product.
Silicone Slip Shave Oil (Formulation #SH-1)
This Shave Oil is formulated to provide excellent razor glide and lubricity. It spreads easily over the skin, leaving it feeling soft, supple and moisturised. This crystal clear product allows you to see where you are shaving, unlike traditional foam-based products.
Silk Touch CC Cream (Formulation #MJ13F_010)
CC (Complete Correction) Creams are the new BB Creams! This formulation is a blend of skincare and make up, with a light, natural feel and radiance effect. SeraSilk EL 63 (Cyclopentasiloxane (and) Dimethicone/Vinyl Dimethicone Crosspolymer) gives skin a powdery soft feel and soft-focus effect. SeraSol SC 86 (PEG-10 Dimethicone) and SeraSol EL 92 (Dimethicone (and) Dimethicone/PEG-10/15 Crosspolymer) have a strong synergistic W/O emulsifying effect.
Silky Body Wash (Formulation #BW-1)
This luxurious mild body wash contains SeraSoft SW 74 (Bis-PEG-18 Disiloxane) to boost foam creaminess. Both SeraSoft SW 74 and SeraSoft SW 70 (Stearyl Dimethicone) melt at body temperature and so give a smooth, soft feel to skin. The elastomer emulsion SeraSilk EM 601 (Dimethicone/Vinyl Dimethicone Crosspolymer (and) C12-14 Pareth-7) allows easy processing and leaves skin feeling powdery soft.
Silky Body Whipping Cream (Formulation #BL-1)
This luxurious cream is light however leaves the skin feeling moisturised and smooth. SeraSoft SW 70 (Stearyl Dimethicone) is a silicone was which melts at body temperature, giving a smooth feel. SeraSilk EL 60 (Cyclopentasiloxane (and) Dimethicone/Vinyl Dimethicone Crosspolymer) is an elastomer which leaves the skin feeling velvety soft.
Simpl Shine Spray (Formulation #CC-8)
This shine spray is a simple but effective formulation for spritzing over the hair post styling, giving a high shine finish. SeraSense SF DDM (Diphenyl Dimethicone) has a higher refractive index than Phenyl Trimethicone.
SLES-Free Shampoo (Formulation #PS-1)
This SLES-Free Shampoo offers a milder option to traditional sodium laureth sulphate cleansers. This ‘everyday’ shampoo meets market demand with Basildon silicone SeraSol SC 83 (Cetyl PEG/PPG-10/1 Dimethicone) playing a vital role in conditioning with suitable foam performance.
Soft Touch Foundation (Formulation #CC-F-10)
This cold-processable Soft Touch Foundation utilises SeraSilk EM 601 (Dimethicone/Vinyl Dimethicone Crosspolymer (and) C12-14 Pareth-7), a silicone elastomer which imparts a soft, powdery feel to the skin, giving a matte finish. SeraSense SF PTM (Phenyl Trimethicone) acts as an emollient and water repellent.
Sparkling Serum (Formulation #CC-10)
This serum gives an eye-catching effect, thanks to the addition of suspended glitter. SeraSense GB 11 (Cyclopentasiloxane (and) Dimethicone) coats the hair and conditions, leaving hair frizz-free. SeraSense SF PTM (Phenyl Trimethicone) adds a high shine.
Sulfate-Free Shampoo (Formulation #PS-4)
This Sulfate-Free Shampoo produces a thick, creamy foam and is very mild. SeraShine EM 101 (Dimethicone (and) Isolaureth-6) offers conditioning for all hair types.
Basic Hair Serum - D5 Free (Formulation #CC-3-D5F)
This cyclopentasiloxane-free serum is an oil-based leave-in formulation for wet or dry hair. The blend of silicone products smooth hair and give a healthy shine.
Basic Hair Serum (Formulation #CC-3)
This serum is an oil-based leave-in formulation for wet or dry hair. The blend of silicone products smooth hair and give a healthy shine.
BB Cream (Formulation #BB-1)
BB Cream is foundation for the modern era. This light emulsion not only gives coverage but also moisturises, leaving skin feeling silky smooth and non-greasy, thanks to the addition of SeraSilk EL 60 (Cyclopentasiloxane (and) Dimethicone/Vinyl Dimethicone Crosspolymer).
Super Shine Hair Serum (Formulation #CC-12)
SeraSense SF DDM (Diphenyl Dimethicone) has a higher refractive index (1.505) than Phenyl Trimethicone (1.460), leaving hair even shinier. SeraSense RB 19 (Dimethicone (and) Trimethylsiloxysilicate) is an excellent anti-frizz agent for coarse hair, with long lasting effects. SeraSense GB 11 (Cyclopentasiloxane (and) Dimethicone) is a gum blend which gives the product viscosity whilst smoothing the hair. SeraSense SF 2 (Dimethicone) can be used as an alternative solvent to Cyclopentasiloxane.
Tightening Serum Crème (Formulation #AA-3)
The elastomer in this serum crème, SeraSilk EL 64 (Dimethicone (and) Dimethicone/Vinyl Dimethicone Crosspolymer) gives the skin a luxurious feel, leaving it powdery soft. SeraSense GB 12 (Dimethicone (and) Dimethiconol) aids skin smoothness and SeraSense SF PTM (Phenyl Trimethicone) helps the lotion to spread easily.
36.5°C Melting Rich Cream (Formulation #SJ13F_005)
This cream has a unique texture – it melts on contact with skin. SeraSoft SW 70 (Stearyl Dimethicone) also has this feature, leaving the skin soft and smooth, with a nourished feeling. SeraSilk EL 60 (Cyclopentasiloxane (and) Dimethicone/Vinyl Dimethicone Crosspolymer) creates a luxurious silky after feel.
SeraSense GB 10
SeraSense GB 10 is a widely used blend of volatile cyclopentasiloxane and very high viscosity dimethiconol gum polymer. It is designed for use in Cosmetic and Personal Care applications. It is a clear, colourless viscous fluid. It imparts a pleasant feel to skin by facilitating spreading of the formulation actives and by improving skin elasticity. It forms a water resistant, breathable protective barrier without a negative tacky feel. When used in haircare formulations, SeraSense GB 10 acts as a long-lasting conditioner which provides improved dry combing and imparts a superb soft feel.
SeraSense GB 11
SeraSense GB 11 is a blend of volatile cyclopentasiloxane (D5) and a very high viscosity Dimethicone gum for use in the Cosmetics and Personal Care industry. Dimethicone gum in combination with the cosmetic solvent D5 offers the ability to create a semi-permeable breathable film on the skin which gives emolliency benefits and an excellent skin feel. SeraSense GB 11 is also excellent for offering non-greasy conditioning to the hair strand by incorporating it into 100% active hair treatment and serum products.
SeraSense GB 12
SeraSense GB 12 is a blend of volatile, low molecular weight straight chained dimethicones and a very high viscosity dimethiconol gum polymer, for use in a variety of personal care applications. The blend of volatile dimethicones (1.5cS and 2cS) is specially designed to match the evaporation profile of D5 closely. SeraSense GB 12 imparts a pleasant feel to skin by facilitating the spreading of actives and improving skin elasticity. For haircare, it provides long-lasting conditioning, improving dry combing and leaving hair with a superb soft feel. This cosmetic blend of fluids offers good solvating properties whilst presenting low flammability; and is not considered as VOCs.
SeraSense GB 13
SeraSense GB 13 is a blend of volatile cyclopentasiloxane (D5) and a very high viscosity Dimethicone gum for use in the Cosmetics and Personal Care industry. Dimethicone gum in combination with the cosmetic solvent D5 offers the ability to create a semi-permeable breathable film on the skin which gives emolliency benefits and an excellent skin feel with no negative tackiness. In hair care, the high viscosity gum in the volatile silicone enables SeraSense GB 13 to act as a long-lasting conditioner providing improved dry combing and a superb soft feel.
SeraSense GB 14
SeraSense GB 14 is a blend of volatile cyclopentasiloxane (D5) and a high percentage of very high viscosity Dimethicone gum for use in the Cosmetics and Personal Care industry. Dimethicone gum in combination with the cosmetic solvent D5 offers the ability to create a semi-permeable breathable film on the skin which gives emolliency benefits and an excellent skin feel with no negative tackiness. In hair care, the high viscosity gum in the volatile silicone enables SeraSense GB 14 to act as a long-lasting conditioner providing improved dry combing and a superb soft feel.
SeraSense GB 16
SeraSense GB16 is a blend of low viscosity dimethicone (5cS) and a moderately high viscosity dimethiconol gum polymer. It is designed for use in Cosmetic and Personal Care applications. It is a clear, colourless viscous fluid. It imparts a soft, silky feel to skin by facilitating spreading of the formulation actives and by improving skin elasticity. It forms a water resistant, breathable protective barrier without a negative tacky feel. When used in haircare formulations, SeraSense GB 16 acts as a long-lasting conditioner which provides improved dry combing and imparts a superb soft feel.
SeraSense RB 19
SeraSense RB 19 is a blend of a medium viscosity dimethicone fluid (350cS) and a cross-linked trimethylsiloxysilicate resin. Whilst the main application is as a pigment adhesion promoter in colour and decorative cosmetics, its inherent anti-frizz properties also lend it to use in a variety of hairstyling applications as well such as serums, shampoos and leave-on conditioners. As it is very hydrophobic, it improves the durability and substantivity of personal care formulations. SeraSense RB 19 can be easily diluted in standard dimethicone fluids.
SeraSense SA 30
SeraSense SA 30 is an amino modified silicone fluid which has been designed for use in a wide variety of leave on and rinse conditioners. It can also be used in serums for coloured or dry damaged hair. In hair care products amino silicones provide greater substantivity than standard polydimethylsiloxanes and can maintain their substantivity through several shampooings. The benefits include ease of combing, soft feel and improved shine. SeraSense SA 30 has excellent stability and is compatible with other polydimethylsiloxane products.
SeraSense SA 31
SeraSense SA 31 is a diamino-functional silicone polymer designed for extra substantivity and conditioning ability for use in a wide variety of leave on and rinse conditioners. It can also be used in serums for coloured or dry damaged hair. It is suitable for use in the personal care industry where is can add a range of advanced high conditioning benefits to hair care products.
SeraSense SA 32
SeraSense SA 32 is a low viscosity amino-functional silicone polymer designed for ease of handling and improved combability for use in a wide variety of leave on and rinse conditioners. It can also be used in serums for coloured or dry damaged hair. It is suitable for use in the personal care industry where is can add a range of advanced high conditioning benefits to hair care products.
SeraSense SF 0.65
SeraSense SF 0.65 is a straight chained low molecular weight polydimethylsiloxane. SeraSense SF 0.65 has a close evaporation profile to that of Cyclopentasiloxane, with all the versatility and benefits D5 offers but from a different silicone technology. This fluid offers non-skin cooling vaporisation, which is a negative feature of water or alcohols and can be avoided by using such a volatile silicone. The spread quality of this material is excellent, leaving skin with a soft and silky feel.
SeraSense SF 10
SeraSense SF 10 is used in cosmetics applications. The low viscosity of this fluid makes the ingredient an extremely good spreading agent, which creates non-tacky semipermeable moisture barriers in skin creams and lotions. Low viscosity dimethicone can also eliminate the whitening or ‘soaping’ effect seen in W/O emulsions. In hair care, this material can be used in serums or conditioners to give hair a smooth feel. Soluble in alcohols and volatile silicones.
SeraSense SF 100
SeraSense SF 100 is used in cosmetics applications. The low viscosity of this fluid makes the ingredient an extremely good spreading agent, which creates non-tacky semipermeable moisture barriers in skin creams and lotions. Low viscosity dimethicone can also eliminate the whitening or ‘soaping’ effect seen in W/O emulsions. In hair care, this material can be used in serums or conditioners to give hair a smooth feel. Soluble in alcohols and volatile silicones.
SeraSense SF 12.5K
SeraSense SF 12.5K is used in cosmetics applications. The high viscosity of this fluid makes it highly substantive, with low spreading qualities which can be good for pigment adhesion as well as a non-greasy skin feel. High viscosity dimethicone can also eliminate the whitening or ‘soaping’ effect seen in W/O emulsions, although this is to a lesser extent than lower viscosity silicones. In hair care, this material can be used in serums or conditioners with volatile fluids to give hair a smooth feel and excellent wet and dry combing.
SeraSense SF 1.5
SeraSense SF 1.5 is a straight chained low molecular weight polydimethylsiloxane. SeraSense SF 1.5 has a close evaporation profile to that of Cyclopentasiloxane, with all the versatility and benefits D5 offers but from a different silicone technology. This fluid offers non-skin cooling vaporisation, which is a negative feature of water or alcohols and can be avoided by using such a volatile silicone. The spread quality of this material is excellent, leaving skin with a soft and silky feel.
SeraSense SF 1K
SeraSense SF 1K is used in cosmetics applications. The low-medium viscosity of this fluid makes the ingredient a good spreading agents, whilst offering higher substantivity than those of a lower viscosity. Low-medium viscosity dimethicone can also eliminate the whitening or ‘soaping’ effect seen in W/O emulsions. In hair care, this material can be used in serums or conditioners to give hair a smooth feel and good dry combing.
SeraSense SF 2
SeraSense SF 2 is a straight chained low molecular weight polydimethylsiloxane. SeraSense SF 2 has a close evaporation profile to that of Cyclopentasiloxane, with all the versatility and benefits D5 offers but from a different silicone technology. This fluid offers non-skin cooling vaporisation, which is a negative feature of water or alcohols and can be avoided by using such a volatile silicone. The spread quality of this material is excellent, leaving skin with a soft and silky feel.
SeraSense SF 20
SeraSense SF 20 is used in cosmetics applications. The low viscosity of this fluid makes the ingredient an extremely good spreading agent, which creates non-tacky semipermeable moisture barriers in skin creams and lotions. Low viscosity dimethicone can also eliminate the whitening or ‘soaping’ effect seen in W/O emulsions. In hair care, this material can be used in serums or conditioners to give hair a smooth feel. Soluble in alcohols and volatile silicones.
SeraSense SF 200
SeraSense SF 200 is used in cosmetics applications. The low-medium viscosity of this fluid makes the ingredient a good spreading agents, whilst offering higher substantivity than those of a lower viscosity. Low-medium viscosity dimethicone can also eliminate the whitening or ‘soaping’ effect seen in W/O emulsions. In hair care, this material can be used in serums or conditioners to give hair a smooth feel and good dry combing.
SeraSense SF 30K
SeraSense SF 30K is used in cosmetics applications. The high viscosity of this fluid makes it highly substantive, with low spreading qualities which can be good for pigment adhesion as well as a non-greasy skin feel. High viscosity dimethicone can also eliminate the whitening or ‘soaping’ effect seen in W/O emulsions, although this is to a lesser extent than lower viscosity silicones. In hair care, this material can be used in serums or conditioners with volatile fluids to give hair a smooth feel and excellent wet and dry combing.
SeraSense SF 350
SeraSense SF 350 is used in cosmetics applications. The low-medium viscosity of this fluid makes the ingredient a good spreading agents, whilst offering higher substantivity than those of a lower viscosity. Low-medium viscosity dimethicone can also eliminate the whitening or ‘soaping’ effect seen in W/O emulsions. In hair care, this material can be used in serums or conditioners to give hair a smooth feel and good dry combing.
SeraSense SF 5
SeraSense SF 5 is used in cosmetics applications. The low viscosity of this fluid makes the ingredient an extremely good spreading agent, which creates non-tacky semipermeable moisture barriers in skin creams and lotions. Low viscosity dimethicone can also eliminate the whitening or ‘soaping’ effect seen in W/O emulsions. In hair care, this material can be used in serums or conditioners to give hair a smooth feel. Soluble in alcohols and volatile silicones.
SeraSense SF 50
SeraSense SF 50 is used in cosmetics applications. The low viscosity of this fluid makes the ingredient an extremely good spreading agent, which creates non-tacky semipermeable moisture barriers in skin creams and lotions. Low viscosity dimethicone can also eliminate the whitening or ‘soaping’ effect seen in W/O emulsions. In hair care, this material can be used in serums or conditioners to give hair a smooth feel. Soluble in alcohols and volatile silicones.
SeraSense SF 500
SeraSense SF 500 is used in cosmetics applications. The low-medium viscosity of this fluid makes the ingredient a good spreading agents, whilst offering higher substantivity than those of a lower viscosity. Low-medium viscosity dimethicone can also eliminate the whitening or ‘soaping’ effect seen in W/O emulsions. In hair care, this material can be used in serums or conditioners to give hair a smooth feel and good dry combing.
SeraSense SF 6
SeraSense SF 6 is used in cosmetics applications. The low viscosity of this fluid makes the ingredient an extremely good spreading agent, which creates non-tacky semipermeable moisture barriers in skin creams and lotions. Low viscosity dimethicone can also eliminate the whitening or ‘soaping’ effect seen in W/O emulsions. In hair care, this material can be used in serums or conditioners to give hair a smooth feel. Soluble in alcohols and volatile silicones.
SeraSense SF 60K
SeraSense SF 60K is used in cosmetics applications. The high viscosity of this fluid makes it highly substantive, with low spreading qualities which can be good for pigment adhesion as well as a non-greasy skin feel. High viscosity dimethicone can also eliminate the whitening or ‘soaping’ effect seen in W/O emulsions, although this is to a lesser extent than lower viscosity silicones. In hair care, this material can be used in serums or conditioners with volatile fluids to give hair a smooth feel and excellent wet and dry combing.
SeraSense SF CM5
SeraSense SF CM5 is a cyclic volatile silicone fluid which can be used in a wide variety of skin, hair and colour personal care applications. It has excellent skin feel with a transient emolliency. It is one of the most widely used and important cosmetic solvents currently used. It is recommended for use in antiperspirants and deodorants, skin lotions, hair sprays, nail polishes, shaving lotions, perfumes and colognes, and make-up. It can also be used in air care evaporative applications such as diffusers.
SeraSense SF CM56
SeraSense SF CM56 is a blend of cyclic volatile silicone fluids which can be used in a wide variety of skin, hair and colour personal care applications. It has excellent skin feel with a transient emolliency. It is one of the most widely used and important cosmetic solvents currently used. The ratio of this product is 65:35 cyclopentasiloxane to cyclohexasiloxane and is designed to create a more varied evaporation profile than the standard SeraSense CM5 product which leads to a unique elegant feel. It is recommended for use in antiperspirants and deodorants, skin lotions, hair sprays, nail polishes, shaving lotions, perfumes and colognes, and make-up. It can also be used in air care evaporative applications such as diffusers.
SeraSense SF CPM
SeraSense SF CPM is an alkyl modified siloxane which can be used in a wide variety of skin, hair and colour cosmetic applications. It delivers excellent smoothness, detackification and emollience whilst offering a skin feel that differs from other volatile silicones. Caprylyl Methicone gives a light, dry feel, which reduces the rub-in time of creams and lotions. This polymer is also very compatible with organic ingredients meaning that formulations containing natural materials can be created that still feel light and silky. It is recommended for use in antiperspirants and deodorants, skin lotions, make-up, make-up removers and hair conditioners. It can also be used in air care evaporative applications, such as diffusers.
SeraSense SF DDM
SeraSense SF DDM is a high shine di-phenyl modified silicone for use in skin care, sun care, antiperspirants and hair care formulations. Due to the high refractive index of this ingredient, SeraSense SF DDM creates a high degree of shine, making it perfect for inclusion into hair care products. At 100% active this material is perfect for serums. Diphenyl Dimethicone is also an incredibly soft, low tack ingredient for including into skin creams, antiperspirants and in particular sun care formulations. For these application areas, the unique skin feel properties are highly desirable, as are the low adhesion benefits. Addition levels vary dependant on desired gloss.
SeraSense SF PTM
SeraSense SF PTM is a high shine phenyl modified silicone for use in skin care, sun care, antiperspirants and hair care formulations. Due to the high refractive index of this ingredient, SeraSense SF PTM creates a high degree of shine, making it perfect for inclusion into hair care products. At 100% active this material is perfect for serums. For waterbased products such as shampoos and conditioners, why not try our 20% O/W co-emulsion of this, SeraShine EM 501C. Phenyl Trimethicone is also an incredibly soft, low tack ingredient for inclusion into skin creams and in particular sun care products. For these application areas, the unique skin feel properties are highly desirable, as are the low adhesion benefits.
SeraSense SQ 40
SeraSense SQ 40 is a medium viscosity quaternary ammonium silicone polymer. The permanent ammonium ion on this polymer enables it to provide targeted conditioning on damaged hair as well as coloured protection on dyed hair through electrostatic attraction to the hair cuticle. It is also designed for use in heat protective hair serums and other leave on products. It may also enhance hair strength. When used in conjunction with other silicone ingredients in skin and lip care formulations SeraSense SQ 40 imparts a pleasant, non-oily skin feel that is unique from other silicones. It is especially recommended for colour cosmetic products where long-lasting durable effects are required. The recommended usage levels vary according to application but 0.5 – 3% is a recommended starting point.
SeraShine EM 101
SeraShine EM 101 dimethicone emulsion is a non-ionic emulsion of high viscosity polydimethylsiloxane for use in both shampoo and conditioner formulations. Leaving the hair feeling soft and smooth, it also delivers excellent dry combing and gloss. Wet combing is improved, and hair is left feeling soft and smooth. An added benefit of this emulsion is that foam and viscosity is not adversely affected. It is designed for use in formulations for shampoos, 2 in 1 shampoos, and conditioners. The recommended usage level is 1-5% depending on the conditioning effect which is required and the hair type.
SeraShine EM 201
SeraShine EM 201 dimethiconol emulsion is an anionic emulsion of a high viscosity polydimethylsiloxane. Designed for frequent use and all hair types. Wet combing is improved, and hair is left feeling soft and smooth. An added benefit of this emulsion is that foam is not adversely affected. It is designed for use in formulations for shampoos, 2 in 1 shampoos, and conditioners. KCC Beauty’s expertise in the manufacture of emulsions enables us to offer a low external viscosity emulsion which is easy to blend and pour. The recommended usage level is 0.5-5% depending on the conditioning effect which is required and the hair type.
SeraShine EM 202
SeraShine EM 202 Dimethiconol Emulsion is an anionic emulsion of very high viscosity polydimethylsiloxane for use in rich conditioning shampoos and with careful formulation, can be incorporated into excellent cationic conditioner products. Designed for frequent use. Wet combing is improved and hair is left feeling soft and smooth. Ideal for any hair type. It is designed for use in formulations for shampoos, 2 in 1 shampoos, and conditioners. KCC Beauty’s expertise in the manufacture of emulsions enables us to offer a low external viscosity emulsion which is easy to blend and pour. The recommended usage level is 0.5-5% depending on the conditioning effect which is required and the hair type.
SeraShine EM 203-E
SeraShine EM 203-E Dimethiconol Emulsion is an anionic emulsion of very high viscosity polydimethylsiloxane for use in rich conditioning shampoos and with careful formulation, can be incorporated into excellent cationic conditioner products. Designed for frequent use. This emulsion is versatile enough to be formulated into products for all hair types. It improves wet combing whilst leaving the hair soft and smooth. It is designed for use in formulations for shampoos, 2 in 1 shampoos, and conditioners. KCC Beauty’s expertise in the manufacture of emulsions enables us to offer a low external viscosity emulsion which is easy to blend and pour. The recommended usage level is 0.5-5% depending on the conditioning effect which is required and the hair type.
SeraShine EM 204C-E
SeraShine EM 204C-E is an anionic microemulsion of high viscosity dimethiconol developed specifically for use in the Cosmetics and Personal Care industry. It is primarily incorporated into rinse off shampoo formulations where the formulator can use the microemulsion properties of SeraShine EM 204C-E to create clear conditioning products. Due to the small particle size, this emulsion gives light conditioning for fine hair or volumising applications. This emulsion offers improved dry combing, with a soft but light conditioned feel.
SeraShine EM 205-E
SeraShine EM 205-E is an anionic emulsion of very high viscosity polydimethylsiloxane and large particle size for increased conditioning effect. These attributes make it the perfect emulsion to incorporate into shampoos and conditioners for coarser hair types or simply formulations where intense conditioning is required. Wet combing is improved and hair is left shiny and manageable. Foam is not adversely affected. Specifically designed for coarse African and Asian hair types.
SeraShine EM 206
SeraShine EM 206 Dimethiconol Emulsion is an anionic emulsion of very high viscosity polydimethylsiloxane for use in rich conditioning shampoos and with careful formulation, can be incorporated into excellent cationic conditioner products. Designed for frequent use. This emulsion is versatile enough to be formulated into products for all hair types. It improves wet combing whilst leaving the hair soft and smooth. It is designed for use in formulations for shampoos, 2 in 1 shampoos, and conditioners. KCC Beauty’s expertise in the manufacture of emulsions enables us to offer a low external viscosity emulsion which is easy to blend and pour. The recommended usage level is 0.5-5% depending on the conditioning effect which is required and the hair type.
SeraShine EM 207
SeraShine EM 207 Dimethiconol Emulsion is an anionic emulsion of very high viscosity polydimethylsiloxane for use in rich conditioning shampoos and with careful formulation, can be incorporated into excellent cationic conditioner products. Designed for frequent use. Wet combing is improved and hair is left feeling soft and smooth. Ideal for any hair type. It is designed for use in formulations for shampoos, 2 in 1 shampoos, and conditioners. KCC Beauty’s expertise in the manufacture of emulsions enables us to offer a low external viscosity emulsion which is easy to blend and pour. The recommended usage level is 0.5-5% depending on the conditioning effect which is required and the hair type.
SeraShine EM 208
SeraShine EM 208 Dimethiconol Emulsion is an anionic emulsion of very high viscosity polydimethylsiloxane for use in rich conditioning shampoos and with careful formulation, can be incorporated into excellent cationic conditioner products. Combination of high internal viscosity and fine particle size means this emulsion is ideal for fine hair types. Designed for frequent use. This emulsion is versatile enough to be formulated into products for all hair types. It improves wet combing whilst leaving the hair soft and smooth. It is designed for use in formulations for shampoos, 2 in 1 shampoos, and conditioners. KCC Beauty’s expertise in the manufacture of emulsions enables us to offer a low external viscosity emulsion which is easy to blend and pour.
SeraShine EM 301-E
SeraShine EM 301-E is a cationic macro emulsion of an amino functional silicone polymer. It is designed for use in a wide range of hair care formulations including shampoos, conditioners, styling aids and hair colourants. In hair care products amodimethicones give improved substantivity and deposition compared to standard dimethicone products. The benefits of using SeraShine EM 301-E include ease of combing, a silky sheen and a soft feel. It is compatible with cationic surfactants and can be easily diluted by the simple addition of water. The recommended usage level is 1-5% depending on the application.
SeraShine EM 302C
SeraShine EM 302C is a high clarity, low odour, non-ionic micro-emulsion of amodimethicone developed specifically for use in clear aqueous haircare products. This emulsion is highly substanive to hair, therefore improving wet and dry combing, and protecting hair from colour leaching. It is designed for use in a wide range of hair care formulations including shampoos, conditioners, styling aids and hair colourants. In hair care products amodimethicones give improved substantivity and deposition compared to standard dimethicone products. The benefits of using SeraShine EM 302C include ease of combing, a silky sheen and a soft feel. It is compatible with anionic and cationic surfactants and can be easily diluted by the simple addition of water.
SeraShine EM 303C
SeraShine EM 303C is a high clarity, low odour, non-ionic micro-emulsion of amodimethicone developed specifically for use in clear aqueous haircare products. This emulsion is highly substanive to hair, therefore improving wet and dry combing, and protecting hair from colour leaching. It is designed for use in a wide range of hair care formulations including shampoos, conditioners, styling aids and hair colourants. In hair care products amodimethicones give improved substantivity and deposition compared to standard dimethicone products. The benefits of using SeraShine EM 303C include ease of combing, a silky sheen and a soft feel. It is compatible with anionic and cationic surfactants and can be easily diluted by the simple addition of water.
SeraShine EM 401C
SeraShine EM 401C is a non-ionic clear micro emulsion of a medium viscosity alkyl quaternary ammonium polydimethylsiloxane. It was developed for use in the manufacture of conditioning shampoos and other hair care products. The fine particle size and charged quaternary ammonium silicone of SeraShine EM 401C make it ideal in this type of formulation where it provides a high quality conditioning effect on a variety of hair types. It is excellent for conditioning and protecting coloured or damaged hair and may improve hair strength These effects can be seen at addition levels of between 1.5 – 4.0%. KCC Beauty has a long history of excellence in the manufacture of silicone emulsions, and this product is a prime example of our expertise in this area.
SeraShine EM 501C
SeraShine EM 501C is a clear micro co-emulsion of shine boosting Phenyl Trimethicone and the cationic polymer, Silicone Quaternium-17. The combination of these two silicones offers excellent deposition of the Phenyl Trimethicone to the hair, enhancing gloss and adding softness to the abraded hair cuticle, whilst the Silicone Quaternium offers excellent conditioning of damaged dry and coloured hair. These effects can be seen at addition levels of between 1.5 – 4.0% to clear shampoo and intense conditioner formulations. KCC Beauty have a long history of excellence in the manufacture of silicone emulsions, and this product is a prime example of this pedigree coming to the fore.
SeraShine EM 502C
SeraShine EM 502C is a clear non-ionic micro co-emulsion of the cationic polymer, Silicone Quaternium-17 and a cross-linked Trimethylsiloxysilicate resin which functions as a highly effective anti-frizz agent. The combination of these two silicones offers excellent deposition of the silicone resin to the hair, eliminating fizzy ‘fly-away’ hair and adding softness to the abraded hair cuticle, whilst the Silicone Quaternium offers excellent conditioning of damaged dry and coloured hair. These effects can be seen at addition levels of between 1.5 – 5.0% to clear shampoo and intense conditioner formulations. KCC Beauty has a long history of excellence in the manufacture of silicone emulsions, and this product is a prime example of this pedigree coming to the fore.
SeraShine EM 503
SeraShine EM 503 is a milky white co-emulsion of excellent conditioning high viscosity Dimethicone and the soft foam boosting polymer, Cocamidopropyl Betaine with Guar gum for enhanced deposition. The combination of these ingredients offers excellent qualities to the hair, enhancing gloss and adding softness to the abraded hair cuticle, whilst the large particle size and guar enhances deposition to condition even the most coarse hair types. These effects can be seen at addition levels of between 2.0 – 5.0% to opaque shampoo and intense conditioner formulations. This product has been specifically designed for the Asian and African hair care market
SeraShine EM 505
SeraShine EM 505 is a milky white co-emulsion of excellent conditioning high viscosity Dimethicone and an amino modified dimethicone polymer for enhanced deposition, colour protection and shine. The combination of these silicones offers excellent protection qualities to the hair, enhancing gloss and adding softness to the dry abraded hair cuticle, whilst the relatively large particle size and electrostatic attraction from the amodimethicone enhances deposition to condition even the most coarse hair types. These effects can be seen at addition levels of between 1.0 – 4.0% to opaque shampoo and intense conditioner formulations. This product has been specifically designed for the Asian and African hair care market.
SeraSilk EL 60
SeraSilk EL 60 is a mixture of a high molecular weight crosslinked silicone elastomer in cyclopentasiloxane. SeraSilk EL 60 can be included in many products to enhance the skin feel, spreadability, absorption and "soft-focus" effect of the finished product. It is a strong mattifying agent and is ideal for use in colour cosmetics applications where their sebum absorbing properties offer a matte, smooth and non-greasy appearance.
SeraSilk EL 61
SeraSilk EL 61 is a mixture of a high molecular weight crosslinked silicone elastomer in non-volatile 6cS dimethicone fluid. SeraSilk EL 61 can be included in many products to enhance the skin feel, spreadability, absorption and "soft-focus" effect of the finished product. It is a strong mattifying agent and is ideal for use in colour cosmetics applications where their sebum absorbing properties offer a matte, smooth and non-greasy appearance.
SeraSilk EL 63
SeraSilk EL 63 is a mixture of a high molecular weight crosslinked silicone elastomer in cyclopentasiloxane. SeraSilk EL 63 can be included in many products to enhance the skin feel, spreadability, absorption and "soft-focus" effect of the finished product. It is a strong mattifying agent and is ideal for use in colour cosmetics applications where their sebum absorbing properties offer a matte, smooth and non-greasy appearance.
SeraSilk EL 64
SeraSilk EL 64 is a mixture of a high molecular weight crosslinked silicone elastomer in volatile straight chained 2cS dimethicone fluid. SeraSilk EL 64 can be included in many products to enhance the skin feel, spreadability, absorption and "soft-focus" effect of the finished product. It is a strong mattifying agent and is ideal for use in colour cosmetics applications where their sebum absorbing properties offer a matte, smooth and non-greasy appearance.
SeraSilk EL 65
SeraSilk EL 65 is a mixture of a high molecular weight crosslinked silicone elastomer in volatile straight chained 2cS dimethicone fluid. SeraSilk EL 65 can be included in many products to enhance the skin feel, spreadability, absorption and "soft-focus" effect of the finished product. It is a strong mattifying agent and is ideal for use in colour cosmetics applications where their sebum absorbing properties offer a matte, smooth and non-greasy appearance.
SeraSilk EL 66
SeraSilk EL 66 is a mixture of a high molecular weight crosslinked silicone elastomer in a blend of 1.5cS and 2cS volatile straight chained dimethicone fluids designed to mimic the qualities of cyclopentasiloxane. SeraSilk EL 66 can be included in many products to enhance the skin feel, spreadability, absorption and "soft-focus" effect of the finished product. It is a strong mattifying agent and is ideal for use in colour cosmetics applications where their sebum absorbing properties offer a matte, smooth and non-greasy appearance.
SeraSilk EL 69
SeraSilk EL 69 is a mixture of a high molecular weight spherical particulate crosslinked silicone elastomer in Cyclopentasiloxane and Cyclohexasiloxane. SeraSilk EL 69 can be included in many products to enhance the skin feel, spreadability, absorption and "soft-focus" effect of the finished product. It is a strong mattifying agent and is ideal for use in colour cosmetics applications where their sebum absorbing properties offer a matte, smooth and non-greasy appearance.
SeraSilk EM 601
SeraSilk EM 601 is a non-ionic emulsion of a spherical particulate vinyl dimethicone elastomer powder. As an emulsion, this is an incredibly easy way to incorporate an elastomer powder into water based formulations. Large particle size ~5µm. SeraSilk EM 601 can be included in many products to enhance the skin feel, spreadability, absorption and "soft-focus" effect of the finished product. It is a strong mattifying agent and is ideal for use in colour cosmetics applications where their sebum absorbing properties offer a matte, smooth and non-greasy appearance.
SeraSnow SP 12
SeraSnow SP 12 is a fine powder silicone resin for use in a range of decorative cosmetics. It improves water resistance in colour cosmetic, skin care and sun care applications, and can be used in leave-in hair care dry shampoos and styling products to offer matt volumising effects and a soft typically silicone feel.
SeraSnow SP 13
SeraSnow SP 13 is a 100% active high molecular weight, crosslinked silicone elastomer powder. SeraSnow SP 13 can be included in many products to enhance the skin feel, spreadability, absorption and ‘soft-focus- effect of the finished product. This material is excellent for wrinkle-smoothing formulations. It can also be used in dry shampoo formulations to absorb natural oils whilst offering a soft feel. KCC Beauty silicone elastomers are strong mattifying agents and are ideal for colour cosmetics applications, where their sebum absorbing properties offer a matte, smooth and non-greasy appearance. They have the ability to increase formulation oil phase viscosity and product a dry, silky smooth skin feel.
SeraSoft EM 701
SeraSoft EM 701 is an O/W emulsion of stearyl dimethicone which has good compatibility with organic ingredients, enhances softness, and generates high gloss in various formulations. The product was developed to enable the incorporation of a silicone wax into aqueous skin care and cosmetic products (see SeraSoft SW 70 for the 100% active version). This product can be incorporated into aqueous formulations with low shear mixing, and as no heating is required, can be used with cold processes.
SeraSoft SW 70
SeraSoft SW 70 is a soft wax alkylated silicone. The alkyl modification makes this type of silicone more compatible with organic ingredients. It enhances softness and generates high gloss in various formulations. Due to its composition, this material is favourably used in sun care, where it melts onto the skin for an excellent feel whilst improving the spread of actives thus potentially improving the SPF. In addition to this, SeraSoft SW 70’s compatibility with other organic materials gives it many uses in other skin care products as well as colour cosmetics, where it offers the additional benefit of excellent shine from its high refractive index. For water-based products, this material is available as a 35% emulsion, SeraSoft EM 701, for where cold processing is essential.
SeraSoft SW 71
SeraSoft SW 71 is a liquid alkylated silicone. The alkyl modification makes this type of silicone more compatible with organic ingredients. It offers water-repellency film forming properties to formulations, such as sun protection products. In addition, SeraSoft SW 71 enhances softness and generates high gloss in various formulations. Due to its composition, this material is favourably used in sun care, where it improves the spread of actives thus potentially boosting the SPF. In addition to this, SeraSoft SW 71’s compatibility with other organic materials gives it many uses in other skin care products as well as colour cosmetics, where it offers the additional benefit of excellent shine from its high refractive index.
SeraSoft SW 72
SeraSoft SW 72 is a water-dispersible silicone glycol copolymer wax for use in various skin care and foaming applications. SeraSoft SW 72 melts on contact with skin, giving an elegant smooth and silky feel. Skin is left moisturised due to the humectancy properties. In surfactant systems, SeraSoft SW 72 improves foam density and volume, giving luxurious creamy lather. In skincare applications, this material provides detackification where required, particularly in antiperspirant deodorant formulations.
SeraSoft SW 73
SeraSoft SW 73 is a soft wax alkylated silicone. The alkyl modification makes this type of silicone more compatible with organic ingredients. It enhances softness and generates high gloss in various formulations. Due to its composition, this material is favourably used in sun care, where it melts onto the skin for an excellent feel whilst improving the spread of actives thus potentially improving the SPF. In addition to this, SeraSoft SW 73’s compatibility with other organic materials gives it many uses in other skin care products as well as colour cosmetics, where it offers the additional benefit of excellent shine from its high refractive index.
SeraSoft SW 74
SeraSoft SW 74 is a soft wax alkylated silicone. The alkyl modification makes this type of silicone more compatible with organic ingredients. SeraSoft SW 74 melts on contact with skin, giving an elegant smooth and silky feel. Skin is left moisturised due to the humectancy properties. In surfactant systems, SeraSoft SW 74 improves foam density and volume, giving luxurious creamy lather. In skincare applications, this material provides detackification where required, particularly in antiperspirant deodorant formulations.
SeraSol EL 92
SeraSol EL 92 is a PEG modified self-emulsifying crosslinked silicone elastomer surfactant which has been swollen in 6cS dimethicone fluid for the creation of truly unique W/Si emulsions. This silicone emulsifier is capable of making highly stable micelle structures with no additional emulsifiers needing to be added to the formulation. SeraSol EL 92 has been designed especially for fast breaking “water drop” like cream and serum formulations thanks to the elastomeric sponge like structure that makes up the wall of the micelle. SeraSol EL 92 can be included in many products to enhance the skin feel, spreadability, absorption and "soft-focus" effect of the finished product and can create highly stable W/Si emulsions.
SeraSol SC 80
SeraSol SC 80 is a 100% active dimethicone copolyol suitable for a variety of personal care applications. SeraSol SC 80 exhibits multi-functionality typical of organo modified siloxanes, providing characteristics typically associated with both silicone and organic based additives. It can be used with other dimethicone copolyols or organic based emulsifiers to create a variety of emulsions and enhance emulsion characteristics such as particle size and overall stability. SeraSol SC 80 exhibits pro-foaming qualities helping to stabilise foam levels and also helps provide a soft and silky skin feel. It also can exhibit plasticizing properties useful for modifying the properties of hair styling polymers.
SeraSol SC 81
SeraSol SC 81 is a 100% active dimethicone copolyol suitable for a variety of personal care applications. SeraSol SC 81 exhibits pro-foaming qualities helping to stabilise foam levels and also helps provide a soft and silky skin feel. Can be used in a wide variety of skin and clear hair care formulations. Also useful as a wet conditioning additive for shaving, bathing and shower products. Can exhibit plasticizing properties useful for modifying the properties of hair styling polymers.
SeraSol SC 82
SeraSol SC 82 is a liquid polysiloxane polyalkyl polyether block copolymer designed to have a low HLB for use as a silicone emulsifier for W/O emulsions. The chemical structure of SeraSol SC 82 allows the incorporation of potentially difficult ingredients that would normally have a destabilising effect on the emulsion. This key emulsifier is ideal for various skin and sun cream applications. Night creams need not feel heavy with the use of this elegant silicone emulsifier.
SeraSol SC 83-E
SeraSol SC 83-E is a liquid polysiloxane polyalkyl polyether block copolymer designed for use as a personal care grade silicone emulsifier for W/O and W/Si emulsions. This is a unique silicone emulsifier for skin creams, lotions and foundations. The copolyols act as the hydrophile whilst the alkyl modification offers the hydrophobic tail, with the silicone acting as the sandwiching layer that offers a pleasant light and silky feel to the W/O or W/Si emulsion. Compatible with high levels of organic ingredients. Generates excellent freeze / thaw stability.
SeraSol SC 84
SeraSol SC 84 is a carefully formulated mixture of silicone polyethers, Cyclopentasiloxane and water, designed specifically to assist in the production of water-in-oil (W/O) formulations, especially water in-silicone (W/Si) emulsions where volatile silicones are used. It is, in itself a product with two phases. An external silicone and an internal aqueous one. It is therefore also a useful delivery vehicle for polar and non-polar ingredients especially emollients, antiperspirant actives and pigments for inclusion in W/O formulations. This formulation aid is a versatile personal care ingredient with uses in colour cosmetic, antiperspirant, sun care, skin care and male grooming formulations.
SeraSol SC 85
SeraSol SC 85 is a copolymer of polydimethylsiloxane and polyoxyalkaylene ether. Primarily used in hair care, this silky soft PEG modified silicone offers excellent wet conditioning whilst creating gloss, reducing static in hair and a significant amount of rich luxurious foam. SeraSol SC 85’s good pro-foaming qualities help to stabilise foam levels and also helps provide a soft and silky skin feel. Can be used in a wide variety of skin and clear hair care formulations. Also useful as a wet conditioning additive for shaving, bathing and shower products. Can exhibit plasticizing properties useful for modifying the properties of hair styling polymers.
SeraSol SC 86
SeraSol SC 86 is a copolymer of polydimethylsiloxane and polyoxyalkaylene ether. A light and silky PEG modified silicone for use as a surface tension depressant, or emulsifier in a wide range of colour cosmetic, skin care and clear hair care applications. Good wet conditioner for shaving and hair care products. SeraSol SC 86 exhibits multifunctionality typical of organo modified siloxanes, providing characteristics typically associated with both silicone and organic based additives. It can be used with other dimethicone copolyols or organic based emulsifiers to create a variety of emulsions and enhance emulsion characteristics such as particle size and overall stability. SeraSol SC 86 exhibits pro-foaming qualities helping to stabilise foam levels and also helps provide a soft and silky skin feel. It also can exhibit plasticizing properties useful for modifying the properties of hair styling polymers.
SeraSol SC 89
SeraSol SC 89 is a copolymer of polydimethylsiloxane and polyoxyalkaylene ethers. A light and silky silicone based emulsifier that can be used to help create a wide range of O/W creams and lotions with a soft rub-out. This silicone is highly versatile and offers formulation flexibility as well as a wide range of sensory benefits. Also useful as a wet conditioning additive for shaving, bathing and shower products. Can exhibit plasticizing properties useful for modifying the properties of hair styling polymers.
SeraSol SC 90
SeraSol SC 90 is a copolymer of polydimethylsiloxane and polyoxyalkaylene ethers. A light and silky silicone based emulsifier that can be used to help create a wide range of O/W creams and lotions with a soft rub-out. This silicone is highly versatile and offers formulation flexibility as well as a wide range of sensory benefits. Also useful as a wet conditioning additive for shaving, bathing and shower products. Can exhibit plasticizing properties useful for modifying the properties of hair styling polymers.
SeraSol SC 91
SeraSol SC 91 is a copolymer of polydimethylsiloxane and polyoxyalkaylene ethers. A light and silky silicone based emulsifier that can be used to help create a wide range of O/W creams and lotions with a soft rub-out. This silicone is highly versatile and offers formulation flexibility as well as a wide range of sensory benefits. Also useful as a wet conditioning additive for shaving, bathing and shower products. Can exhibit plasticizing properties useful for modifying the properties of hair styling polymers.
