Home / Personal Care & Cosmetics / Suppliers / Innospec Performance Chemicals
Personal Care & Cosmetics
Innospec Performance Chemicals
Innospec Performance Chemicals lists 335 grades in Personal Care & Cosmetics. The sheets saved on this site are below.
Grades from Innospec Performance Chemicals
Aminol® CM Flakes
Aminol® CM Flakes is a superamide for use in personal care products, such as shampoos, bubble baths and liquid hand soaps. Aminol® CM Flakes is used as a foam booster and stabilizer, lime soap dispersant, thickener and viscosity builder and gelling agent. It also has good detergency and enhances wetting properties when used in combination with other surface active agents.
Activemol DOM-R
Activemol DOM-R is a light, water white lipophilic ester that exhibits exceptional performance properties in both Skin Care and Hair Care formulations. This unique diester provides excellent moisturization benefits to skin and hair as well as imparting shine.
Activemol EH-25
Activemol EH-25 is an octanoate ester of C12-15 alcohol. This non-greasy, hydrophobic ester delivers a uniquely dry emolliency to skin. Its unique dry down and satiny after-feel lends its use as a skin conditioner in hand and body as well as facial products. Activemol EH-25 demonstrates low toxicological scores on skin and eyes making it safe to use in all types of skin care formulations.
Activemol® EH-25
Activemol® EH-25 is an octanoate ester of C12-15 alcohol. This non-greasy, hydrophobic ester delivers a uniquely dry emolliency to skin. Its unique dry down and satiny after-feel lends its use as a skin conditioner in hand and body as well as facial products.
ACTIVEMOL™ GC
ACTIVEMOL™ GC can be used as a solvent in cosmetic, personal care applications. Due to its low toxicity, low evaporation rate, low flammability, and moisturizing ability, GC possesses the characteristics required of a wetting agent for cosmetic clays.
Activsoft C-13
Activsoft C-13 is a cationic polymer, naturally derived from the guar bean, that is commonly used as a conditioning agent in shampoos, cream rinse conditioners, shower gels, body wash, and skin cleanser formulas. It appears as a yellow, free flowing powder.
Activsoft C-14
Activsoft C-14 is a cationic polymer, naturally derived from the guar bean, that is completely compatible with most common anionic, cationic and amphoteric surfactants. It is ideally suited for use in two-in-one conditioning shampoos and moisturizing skin cleansing products. When used in personal cleansing formulations, Activsoft C-14 imparts a soft, elegant after-feel to the skin and also enhances wet comb and dry comb properties to shampoos and hair conditioning systems.
Activsoft C-17
Activsoft C-17 is a highly charged cationic polymer, naturally derived from the guar bean. Activsoft C-17 is completely compatible with most common anionic, cationic and amphoteric surfactants and is ideally suited for use in two-in-one conditioning shampoos and moisturizing skin cleansing products. When used in personal cleansing formulations, Activsoft C-17 imparts a soft, elegant after-feel to the skin and also enhances wet comb and dry comb properties to shampoos and hair conditioning systems.
Activsoft CD
Activsoft CD is a low molecular weight guar polymer with a medium cationic charge. Commonly used as a conditioning agent in shampoos and conditioners. It leaves hair with a light manageable feel and a healthy-looking volume. Ideal for use in clear inhand and opaque liquid formulations and bar applications.
Activsoft S
Activsoft S is a naturally derived polymer from the guar bean plant, designed for use in personal care products. It is a non-derivatized polymer developed from the ground endosperm of Cyanopsis tetragonoloba. Activsoft S displays excellent viscosity building properties in aqueous formulations and also functions as a foam booster and stabilizer for most common high-foaming surfactant systems.
EMPICOL® LZV / BEP
EMPICOL® LZV / BEP is dried sodium lauryl sulfate in the form of needles. This product is a versatile surfactant capable of producing a fine, creamy foam. It is also a good emulsifier and an excellent wetting agent, with good electrolyte tolerance, making it ideal for use as the primary surfactant in a range of cosmetic and detergent applications. The form is particularly useful for powder and tablet products, such as laundry detergents and additives and dishwash tablets, although it may also find application in many other diverse markets.
EMPICOL® LZV / N
EMPICOL® LZV / N is dried sodium lauryl sulfate in the form of needles. It is ideally suited for use as a foaming and wetting agent in oral care products and as an excipient in pharmaceuticals.It is manufactured specifically to meet the requirements of the monographs for sodium lauryl sulphate in the U.S. Pharmacopoeia (USP40/NF35) and European Pharmacopoeia 9th edition.
EMPICOL® LZV / N / MB
EMPICOL® LZV / N / MB is dried sodium lauryl sulfate in the form of needles. The fatty alcohol from which it is derived is sourced according to the Mass Balance rules set by the RSPO*. It is ideally suited for use as a foaming and wetting agent in oral care products and as an excipient in pharmaceuticals.It is manufactured specifically to meet the requirements of the monographs for sodium lauryl sulphate in the U.S. Pharmacopoeia (USP40/NF35) and European Pharmacopoeia 9th edition.
EMPICOL® LZV / NEP
EMPICOL® LZV / NEP is dried sodium lauryl sulfate in the form of needles. It is ideally suited for use as a foaming and wetting agent in oral care products and as an excipient in pharmaceuticals.It is manufactured specifically to meet the requirements of the monographs for sodium lauryl sulphate in the U.S. Pharmacopoeia (USP40/NF35) and European Pharmacopoeia 9th edition.
EMPICOL® SDD / O
EMPICOL® SDD / O is an aqueous solution of disodium lauryl ethoxy (3EO) sulfosuccinate. This product is a versatile toiletry raw material primarily for use in Cosmetic applications. It is exceptionally mild to both skin and mucous membranes, especially when compared to many other primary surfactants combining optimum performance with excellent foaming characteristics.
EMPICOL® SDD / Y
EMPICOL ® SDD / Y is an aqueous solution of disodium lauryl ethoxy (3EO) sulfosuccinate. This product is a versatile raw material primarily for use in Cosmetic applications.
EMPICOL® TL 40 / X
EMPICOL® TL 40 / X is an aqueous solution of triethanolamine lauryl sulfate. TEA lauryl sulfate is a versatile surfactant used in a wide variety of applications. It is particularly suited to creating a creamy luxurious foam in Cosmetic formulations, such as shampoos, shower gels and liquid soaps, etc. Since this product is neutralised with TEA it may be seen to offer certain characteristics and advantages over equivalent sodium salts, such as improved cold storage, good emulsification and improved mildness to the skin.
EMPICOL® VBS D30 A
EMPICOL® VBS D30 A is a super-concentrated blend of a nonionic surfactant and a solvent, both of which are vegetable derived, and an anionic surfactant. This concentrated blend has been specifically developed to prepare hard surface degreasers that work well on tenacious greasy stains that may be difficult to remove with traditional degreasing products. This product is a concentrated microemulsion specifically designed to give high wetting and degreasing properties intended to be used as is or diluted and/or modified to the customer's specific needs.
EMPICOL® VBS L30
EMPICOL® VBS L30 is a super-concentrated blend of an anionic primary surfactant and a plant derived nonionic surfactant. This product has been designed to give a good wetting in conjunction with a controlled volume of foam intended to be diluted or modified to the customer's specific needs.
EMPICOL® XCT 10
EMPICOL® XCT 10 is a concentrated blend of comparatively mild surfactants specifically developed to aid the rapid formulation of a broad spectrum of Cosmetic and Detergent products. Compliance Highlights Unavailable
EMPICOL® XHI-89
EMPICOL® XHI-89 is a concentrated blend of primary and secondary surfactants specifically designed for the manufacture of dishwashing liquids by the addition to water. It is an improved version of EMPICOL® XHL 140. It is a Concentrated Detergent Base for Corrosive free and EO free Hand Dishwash liquids or Mild Hand Liquid Soaps.
EMPICOL® XHL 100
EMPICOL® XHL 100 is an anionic surfactant concentrate suitable for manufacture of dishwashing liquids and liquid detergents by the addition to water. It is a concentrated blend of anionic surfactants, specifically designed to give the balanced combination of flash foam, foam stability and wetting. It has a good viscosity response, even at relatively low concentrations, which makes it ideal for the formulation of a variety of economic detergent liquids.
EMPICOL® XHL 140
EMPICOL® XHL 140 is a concentrated blend of primary and secondary surfactants specifically designed for the manufacture of dishwashing liquids by the addition to water. It is a Concentrated Detergent Base for Corrosive free and EO free Hand Dishwash liquids or Mild Hand Liquid Soaps.
EMPIGEN® 5151
EMPIGEN® 5151 is an aqueous solution of disodium cocoamphodiacetate. It is of particular interest for incorporation into low irritancy formulations like baby shampoos and baby baths. Its use can give formulation and performance benefits in terms of quality and quantity of foam even in the presence of soap or hard water, good wetting characteristics and easy to handle due to its low viscosity.
EMPIGEN® 5151 / MB
EMPIGEN® 5151 / MB is an aqueous solution of disodium cocoamphodiacetate. The fatty acid from which it is derived is sourced according to the Mass Balance rules set by the RSPO*. It is an amphoteric surfactant compatible with anionic, nonionic, cationic and other amphoteric surfactants.
EMPIGEN® BB
EMPIGEN ® BB is a 30% aqueous solution of lauryl betaine. The product is an amphoteric surfactant compatible with anionic, nonionic, cationic and other amphoteric surfactants. It is stable over a wide pH range, thus providing the formulator with a flexible ingredient for use in many applications. Its use can give formulation and performance benefits in terms of abundant stable foam, superior foaming and cleansing in the presence of soap and hard water and ease of viscosity adjustment. Lauryl betaine may be advantageous compared to many other amphoteric surfactants when formulating colourless or low colour products.
EMPIGEN® BB / HP
EMPIGEN ® BB / HP is an aqueous solution of lauryl betaine with a reduced salt content. The product is an amphoteric surfactant compatible with anionic, nonionic, cationic and other amphoteric surfactants. It is stable over a wide pH range, thus providing the formulator with a flexible ingredient for use in many applications. Its use can give formulation and performance benefits in terms of abundant stable foam, superior foaming and cleansing in the presence of soap and hard water and ease of viscosity adjustment.
EMPIGEN® BS / FE / MB
EMPIGEN® BS / FE / MB is an aqueous solution of cocamidopropyl betaine. The fatty acid from which it is derived is sourced according to the Mass Balance rules set by the RSPO*. This product is an amphoteric surfactant compatible with anionic, nonionic, cationic and other amphoteric surfactants. It is stable over a wide pH range, thus providing the formulator with a flexible ingredient for use in many applications. Its use can give formulation and performance benefits in terms of abundant stable foam, superior foaming and detergency in the presence of soap and hard water, ease of viscosity adjustment and it may also be used to provide a mild conditioning effect.
EMPIGEN® BS / H 50 / MB
EMPIGEN® BS / H 50 / MB is a concentrated aqueous solution of cocamidopropyl betaine. The fatty acid from which it is derived is sourced according to the Mass Balance rules set by the RSPO*. This product is an amphoteric surfactant compatible with anionic, nonionic, cationic and other amphoteric surfactants. It is stable over a wide pH range, thus providing the formulator with a flexible ingredient for use in many applications. Its use can give formulation and performance benefits in terms of abundant stable foam, superior foaming and detergency in the presence of soap and hard water, ease of viscosity adjustment and it may also be used to provide a mild conditioning effect.
EMPIGEN® BS/FE
EMPIGEN® BS / FE is an aqueous solution of cocamidopropyl betaine. This product is an amphoteric surfactant compatible with anionic, nonionic, cationic and other amphoteric surfactants. It is stable over a wide pH range, thus providing the formulator with a flexible ingredient for use in many applications. Its use can give formulation and performance benefits in terms of abundant stable foam, superior foaming and detergency in the presence of soap and hard water, ease of viscosity adjustment and it may also be used to provide a mild conditioning effect.
EMPIGEN® BS/H50
EMPIGEN® BS / H 50 is a concentrated aqueous solution of cocamidopropyl betaine. This product is an amphoteric surfactant compatible with anionic, nonionic, cationic and other amphoteric surfactants. It is stable over a wide pH range, thus providing the formulator with a flexible ingredient for use in many applications. Its use can give formulation and performance benefits in terms of abundant stable foam, superior foaming and detergency in the presence of soap and hard water, ease of viscosity adjustment and it may also be used to provide a mild conditioning effect.
EMPIGEN® BS/HI
EMPIGEN® BS/HI is an aqueous solution of cocamidopropyl betaine. This product is an amphoteric surfactant compatible with anionic, nonionic, cationic and other amphoteric surfactants. It is stable over a wide pH range, thus providing the formulator with a flexible ingredient for use in many applications. Its use can give formulation and performance benefits in terms of abundant stable foam, superior foaming and detergency in the presence of soap and hard water, ease of viscosity adjustment and it may also be used to provide a mild conditioning effect.
Empigen® BS/O
Empigen® BS/O is a coconut oil derived, mild amphoteric surfactant used for gentle cleansing and foaming. When combined with anionic surfactants, it contributes to excellent viscosity building and foam boosting in a finished formula. Compliance Highlights Available
Empigen® BS/O-AV
Empigen® BS/O-AV is a coconut oil-derived, mild amphoteric surfactant used for gentle cleansing and foaming. When combined with anionic surfactants, it contributes to excellent viscosity building and foam boosting in a finished formula. In addition, it is often used to mitigate the skin irritation that can be caused by harsher ingredients when they are used alone. Empigen® BS/O-AV is compatible with anionic, nonionic, and most cationic cleansing systems.
Empigen® BS/O-N
Empigen® BS/O-N is a coconut oil-derived, mild amphoteric surfactant used for gentle cleansing and foaming. When combined with anionic surfactants, it contributes to excellent viscosity building and foam boosting in a finished formula. In addition, it is often used to mitigate the skin irritation that can be caused by harsher ingredients when they are used alone. Empigen® BS/O-N is compatible with anionic, nonionic, and most cationic cleansing systems.
Empigen® BS/O-X
Empigen® BS/O-X is a coconut oil-derived, mild amphoteric surfactant used for gentle cleansing and foaming. When combined with anionic surfactants, it contributes to excellent viscosity building and foam boosting in a finished formula. In addition, it is often used to mitigate the skin irritation that can be caused by harsher ingredients when they are used alone. Empigen® BS/O-X is compatible with anionic, nonionic, and most cationic cleansing systems.
Empigen® BSP
Empigen® BSP is a unique free flowing cocamidopropyl betaine in powder form. It is naturally derived from vegetable sources and readily biodegradable. It is compatible with anionic, non-ionic, cationic, and other amphoteric surfactants, making it a flexible ingredient for formulating. This specially designed, low dusting powder allows for direct incorporation of Empigen® BSP into concentrated dilutable formulations, compressed tablets, liquid cleansers or syndet bars. Usage level is dependent upon application. RSPO Mass-Balanced version, Empigen® BSP MB, is available upon request.
EMPIGEN® CBET
EMPIGEN® CBET is a 30% aqueous solution of coco-betaine. It is an amphoteric surfactant compatible with anionic, nonionic, cationic and other amphoteric surfactants. It is stable over a wide pH range, thus providing the formulator with a flexible ingredient for use in many applications. Its use can give formulation and performance benefits in terms of abundant stable foam, superior foaming and cleansing in the presence of soap and hard water and ease of viscosity adjustment. Coco-betaine may be advantageous compared to many other amphoteric surfactants when formulating colourless or low colour products.
EMPIGEN® CDL 30/J/35
EMPIGEN® CDL 30/J/35 is an aqueous solution of the amphoteric surfactant sodium lauroamphoacetate. Amphoacetates are of particular interest for incorporation into low irritancy formulations like baby shampoos and baby baths. Their use can give formulation and performance benefits in terms of quality and quantity of foam even in the presence of soap or hard water, good wetting characteristics.
EMPIGEN® CDL 60/P
EMPIGEN® CDL 60/P is an amphoteric surfactant compatible with anionic, nonionic, cationic and other amphoteric surfactants. It is of particular interest for incorporation into low irritancy formulations like baby shampoos and baby baths. Its use can give formulation and performance benefits in terms of quality and quantity of foam even in the presence of soap or hard water, good wetting characteristics and easy to handle due to its low viscosity.
EMPIGEN® CDR 2 M / MB
EMPIGEN® CDR 2M / MB is an aqueous solution of sodium cocoamphoacetate specifically manufactured to contain a high ratio of cocoamphodiacetate. The fatty acid from which it is derived is sourced according to the Mass Balance rules set by the RSPO*. EMPIGEN® CDR 2M / MB is an amphoteric surfactant compatible with anionic, nonionic, cationic and other amphoteric surfactants.
EMPIGEN® CDR 2M
EMPIGEN® CDR 2M is an aqueous solution of sodium cocoamphoacetate specifically manufactured to contain a high ratio of cocoamphodiacetate. It is of particular interest for incorporation into low irritancy formulations like baby shampoos and baby baths. Its use can give formulation and performance benefits in terms of quality and quantity of foam even in the presence of soap or hard water, good wetting characteristics and easy to handle due to its low viscosity.
EMPIGEN® CDR 60
EMPIGEN ® CDR 60 is an aqueous solution of sodium cocoamphoacetate. It is an amphoteric surfactant compatible with anionic, nonionic, cationic and other amphoteric surfactants.
EMPIGEN® HBC 40
EMPIGEN® HBC 40 is an aqueous solution hydroxyethyl laurdimonium chloride at circa 40% active. The particular characteristics of EMPIGEN® HBC 40 can be utilised to offer various potential benefits. When used as a co-surfactant with an excess of anionic surfactant, the resulting complex can improve basic functions such as wetting and detergency. The cationic behaviour might also help to provide a conditioning effect.
EMPIGEN® OB
EMPIGEN® OB is an aqueous solution of lauramine oxide. Amine oxides are extremely versatile co-surfactants. In detergents they help to create and stabilise copious foam, as well as improving emulsification and soil removal and the incorporation of an amine oxide into a shampoo can improve the conditioning characteristics. They are resistant to oxidation and are commonly used as solubilising agents and viscosity modifiers in household bleaches with both hypochlorite and peroxide. Their properties can be modified by adjusting the pH of the formulation.
EMPIGEN® OB / MB
EMPIGEN® OB / MB is an aqueous solution of lauramine oxide. The fatty alcohol from which the lauryl dimethylamine is derived is sourced according to the Mass Balance rules set by the RSPO*. Amine oxides are extremely versatile co-surfactants. In detergents they help to create and stabilise copious foam, as well as improving emulsification and soil removal and the incorporation of an amine oxide into a shampoo can improve the conditioning characteristics. They are resistant to oxidation and are commonly used as solubilising agents and viscosity modifiers in household bleaches with both hypochlorite and peroxide. Their properties can be modified by adjusting the pH of the formulation.
EMPIGEN® OD
EMPIGEN® OD is an aqueous solution of alkyl (C12-C18) dimethylamine oxide. Amine oxides are extremely versatile co-surfactants. In detergents they help to create and stabilise copious foam, as well as improving emulsification and soil removal and the incorporation of an amine oxide into a shampoo can improve the conditioning characteristics. They are resistant to oxidation and are commonly used as solubilising agents and viscosity modifiers in household bleaches with both hypochlorite and peroxide. Their properties can be modified by adjusting the pH of the formulation.
EMPIGEN® OD / MB
EMPIGEN® OD / MB is an aqueous solution of alkyl (C12-C18) dimethylamine oxide. The fatty alcohol from which the alkyl (C12-C18) dimethylamine is derived is sourced according to the Mass Balance rules set by the RSPO*. Amine oxides are extremely versatile co-surfactants. In detergents they help to create and stabilise copious foam, as well as improving emulsification and soil removal and the incorporation of an amine oxide into a shampoo can improve the conditioning characteristics. They are resistant to oxidation and are commonly used as solubilising agents and viscosity modifiers in household bleaches with both hypochlorite and peroxide. Their properties can be modified by adjusting the pH of the formulation.
EMPIGEN® OH 25
EMPIGEN ® OH 25 is an aqueous solution of myristamine oxide. Amine oxides are extremely versatile co-surfactants. In detergents they help to create and stabilise copious foam, as well as improving emulsification and soil removal and the incorporation of an amine oxide into a shampoo can improve the conditioning characteristics. They are resistant to oxidation and are commonly used as solubilising agents and viscosity modifiers in household bleaches with both hypochlorite and peroxide. Their properties can be modified by adjusting the pH of the formulation.
EMPIGEN® OS / A
EMPIGEN ® OS / A is an aqueous solution of cocamidopropyl amine oxide. Amidoamine oxides are extremely versatile surfactants. They provide cleaning, foaming, wetting and emulsification in a wide variety of industrial applications.
EMPILAN® 2502
EMPILAN® 2502 is coconut diethanolamide produced by the direct amidation of vegetable oil and it therefore contains residual glycerol. This product is a very good foam-boosting/stabilising agent when used in conjunction with anionic surfactants, such as lauryl sulphates and lauryl ether sulphates. It also provides an efficient means of increasing the viscosity of liquid formulations and can be used to pre-solubilise oils and perfumes during formulation.
EMPILAN® 2502 / MB
EMPILAN® 2502 / MB is coconut diethanolamide produced by the direct amidation of vegetable oil and it therefore contains residual glycerol. The vegetable oil from which it is derived is sourced according to the Mass Balance rules set by the RSPO*. This product is a very good foam-boosting/stabilising agent when used in conjunction with anionic surfactants, such as lauryl sulphates and lauryl ether sulphates. It also provides an efficient means of increasing the viscosity of liquid formulations and can be used to pre-solubilise oils and perfumes during formulation.
EMPILAN® CIS
EMPILAN ® CIS is a coconut monoisopropanolamide flake based on coconut methyl ester. This product is a very good foam-booster and stabilizer that also improves the texture of the foam. In addition, its use provides an efficient means of increasing the viscosity of liquid formulations. EMPILAN® CIS is mostly used in personal care formulations such as shampoos, bath products, shower gels and hand soaps but it can be present in liquid detergents. It may also act as solubiliser for perfumes and essential oils.
EMPILAN® CME/T
EMPILAN® CME / T is cocamide MEA in flake form. It is an excellent co-surfactant for both cosmetic and detergent applications. It is capable of enhancing the foam, in terms of boosting the volume and stabilising it against the detrimental affects of hard water and soap. It can also be used to aid the dissolution or emulsification of oils and other hydrophobic ingredients in formulations as well as helping to remove greasy soils in cleaning applications.
EMPILAN® EGDS / A
EMPILAN ® EGDS / A is a mixture of mono and diesters of ethylene glycol and stearic acid with a high content of diester. Glycol Distearate is used as pearlising agent, opacifier and viscosity builder in many different types of personal care products like creams and lotions, shampoos, liquid soaps and bath gels. It can also be used as softening agent in laundry liquid formulations and as general-purpose emulsifier and emulsions stabilizer in a wide range of industrial applications.
EMPILAN® EGMS
EMPILAN® EGMS is a glycol cetearate in flake form. It is used as pearlising agent in low viscosity shampoos, cleansing creams, liquid soaps and bath gels. This product is also used as an opacifier and oil-soluble emulsifier in such preparations as hand lotions and hand creams. The viscosity of the finished emulsion varies directly with the concentration of the ester but generally speaking 0.5% to 5.0% of the product may be used in hand lotions and 1.0% to 10.0% in hand creams.
EMPILAN® KA 5
EMPILAN ® KA 5 is an alcohol ethoxylate based on a C10-C12 alcohol. The degree of ethoxylation is circa 5. It is an efficient wetting and foaming agent used to provide cleaning, foaming, wetting and emulsification in a wide variety of industrial applications including Home, Beauty and Personal Care.
EMPILAN® KA 5 / 90
EMPILAN ® KA 5 / 90 is a 90% solution of a C10-C12 alcohol condensed with 5 moles of ethylene oxide. It is an efficient wetting and foaming agent used to provide cleaning, foaming, wetting and emulsification in a wide variety of industrial applications including Home, Beauty and Personal Care.
EMPILAN® KCL 11
EMPILAN ® KCL 11 is an alcohol ethoxylate derived from a C12-15 alcohol. The degree of ethoxylation is circa 11. This product is an efficient wetting and foaming agent and has excellent emulsification properties. It is particularly effective in providing cleaning, wetting and emulsification in a wide variety of industrial applications, including household care applications such as surface cleaning and perfume solubilisation.
EMPILAN® KCL 11 / 90
EMPILAN® KCL 11 / 90 is a 90% solution of an alcohol ethoxylate derived from a predominantly linear C12-15 alcohol. The degree of ethoxylation is circa 11. This product is an efficient wetting and foaming agent and has excellent emulsification properties. It is particularly effective when used to provide cleaning, wetting and emulsification in a wide variety of applications, including household care applications such as surface cleaning and perfume solubilisation as well as industrial emulsification processes.
EMPILAN® KCL 7
EMPILAN® KCL 7 is an alcohol ethoxylate based on a C12-C15 alcohol. The degree of ethoxylation is circa 7. It is an efficient wetting and foaming agent used to provide cleaning, foaming, wetting and emulsification in a wide variety of industrial applications.
EMPILAN® KCL 7 / 90
EMPILAN® KCL 7 / 90 is a 90% solution of a C12-C15 alcohol condensed with 7 moles of ethylene oxide. It is an efficient wetting and foaming agent used to provide cleaning, foaming, wetting and emulsification in a wide variety of industrial applications.
EMPILAN® KCL 9 / 85
EMPILAN® KCL 9 / 85 is a C12-C15 synthetic (oxo) alcohol condensed with 9 moles of ethylene oxide, as a 85% aqueous solution. It is used in the formulation of liquid and powder detergent formulations. Compliance Highlights Unavailable
EMPILAN® KI 6
EMPILAN® KI 6 is an ethoxylated isotridecyl alcohol. This product is an excellent wetting agent and emulsifier suitable for a wide range of applications. It is compatible with anionic, amphoteric, cationic and other non-ionic surfactants and is relatively stable over a wide pH range.
EMPILAN® KI 6.5
EMPILAN® KI 6.5 is an ethoxylated isotridecyl alcohol.
EMPILAN® KI 8
EMPILAN ® KI 8 is an iso-tridecyl alcohol ethoxylate containing approximately 8 moles of ethylene oxide. This product exhibits excellent detergent and emulsification properties and it is suitable for a wide range of applications. It is compatible with anionic, amphoteric, cationic and other non-ionic surfactants and is relatively stable over a wide pH range.
EMPILAN® KR 2.5
EMPILAN ® KR 2.5 is an alcohol ethoxylate based on a C9-C11 alcohol. The degree of ethoxylation is circa 2.5. It is an efficient wetting agent used to provide cleaning, wetting and emulsification in a wide variety of industrial applications. It is dispersible in water and it can be used to modify the foaming characteristics in nonionic systems or to stabilise foam in anionic or mixed systems.
EMPILAN® KR 5
EMPILAN® KR 5 is an alcohol ethoxylate based on a C9-C11 alcohol. The degree of ethoxylation is circa 5. It is an efficient wetting and foaming agent used to provide cleaning, foaming, wetting and emulsification in a wide variety of industrial applications.
EMPILAN® KR 6
EMPILAN ® KR 6 is an alcohol ethoxylate based on a C9-C11 alcohol. The degree of ethoxylation is circa 6. It is an efficient wetting and foaming agent used to provide cleaning, foaming, wetting and emulsification in a wide variety of industrial applications.
EMPILAN® KR 6 / 90
EMPILAN® KR 6 / 90 is a synthetic C9-C11 alcohol condensed with 6 moles of ethylene oxide liquefied by addition of 10% water. It is an excellent wetting agent and emulsifier suitable for a wide range of applications.
EMPILAN® KR 8
EMPILAN ® KR 8 is an alcohol ethoxylate based on a C9-C11 alcohol. The degree of ethoxylation is circa 8. It is an efficient wetting and foaming agent used to provide cleaning, foaming, wetting and emulsification in a wide variety of industrial applications.
EMPILAN® KT 7 / 80
EMPILAN® KT 7 / 80 is a 80% solution of an alcohol ethoxylate derived from a linear C10 alcohol. The degree of ethoxylation is circa 7. It is an efficient wetting and foaming agent. It is a particularly effective detergent for textile washing and laundry but it may be used to provide cleaning, wetting and emulsification in a wide variety of applications.
EMPILAN® ME10-CN
EMPILAN® ME10-CN is a coconut-based 10-mole ethoxylate. It is a water-soluble, nonionic surface active agent which is compatible with other nonionic surfactants and with most anionic and cationic surfactants. It is an excellent emulsifier and detergent used in Personal Care Products,Laundry Prespotters and Hard Surface Cleaners
EMPILAN® PF 7165
EMPILAN® PF 7165 is a low foaming alkoxylated alcohol containing circa 5% water to improve the handling properties. It produces a relatively unstable foam, that will rapidly die-away and might find use as a wetting agent, detergent or emulsifier in applications that require low foaming characteristics, such as surface cleaning, textile finishing, agrochemical formulations, etc.
EMPILAN® PF 7168
EMPILAN® PF 7168 is a low foam nonionic surfactant. It offers the combination of excellent wetting, emulsification and low-foam performance and it is particularly suited for application at ambient or relatively low working temperatures. It is a versatile surfactant that may bring benefits in a wide range of applications, such as surface cleaning, textile treatment and as a low foam wetter or synergistic wetting agent and emulsifier in surface coating formulations and agricultural applications.
EMPILAN® PF 7169
EMPILAN® PF 7169 is a low foam nonionic surfactant. It is a versatile low foam surfactant capable of offering excellent wetting performance. It is particularly suited to applications operating at elevated temperatures or to processes with short cycle times. It is a versatile surfactant that may bring benefits in a wide range of applications, such as surface cleaning, textile treatment and as a low foam wetter or synergistic wetting agent and emulsifier in surface coating formulations and agricultural applications.
EMPIMIN® LSM 30
EMPIMIN® LSM 30 is an aqueous solution of a sodium alkyl ethoxy sulphate for industrial application. It is a low viscosity, easily handleable product with good stability against clouding or precipitation in cold weather conditions. Its characteristics make it a particularly good wetting and foaming agent.
EMPIMIN® OP 70
EMPIMIN ® OP 70 is a sodium di-octyl sulfosuccinate in water and propylene glycol solution. This product can be used in a wide range of markets and applications. It shows excellent wetting, dispersing and emulsifying properties as ingredient in different formulations as detergent, personal care, textile or agrochemical. It is also suitable for the manufacture of polymeric compounds by emulsion polymerisation where the product acts as the emulsifier.
EMPIMIN® OT
EMPIMIN® OT is a solution of sodium dioctyl sulfosuccinate in water/ethanol. It is an excellent wetting agent for aqueous systems even at low concentrations. It provides also an excellent dispersing effect on both aqueous and non aqueous dispersions. The applications of this product include detergent products, personal care products (as foam booster), agrochemical formulations and textile auxiliary products. It is also suitable for the manufacture of polymeric compounds by emulsion polymerisation where the product acts as the emulsifier.
EMPIPEARL® XA 200 / X
EMPIPEARL® XA 200 / X is a concentrated blend of ingredients developed to give a pearlescent finish to formulated products. It can be used to provide a luxurious pearlescent finish to formulated products, such as shampoos, foam baths and shower gels. Using this concentrate will help to eliminate expensive heating and time consuming controlled cooling steps normally associated with processing solid pearlising ingredients, as well as ensuring consistent performance. Addition levels of 0.5 - 2% are typically sufficient in most applications.
EMPIPEARL® XA 300 / X
EMPIPEARL ® XA 300 / X is a pearlescent concentrate based on anionic, nonionic and amphoteric surfactants which are manufactured using vegetable derived raw materials. The product can be added to shampoos, foam baths, shower gels and hand cleaning products to provide an opacified or pearlised appearance. The use of this product removes the need for expensive heating equipment which would normally be required for incorporation of a solid pearling agent. It also reduces production time, thereby helping to increase throughput of the manufactured finished product (for use with pearlising concentrates).
EMPIPEARL® XA 400 / X
EMPIPEARL® XA 400 / X is a concentrated blend of ingredients developed to give a pearlescent finish to formulated products. This product can be used to provide a luxurious pearlescent finish to formulated products, such as shampoos, foam baths and shower gels. Using this concentrate will help to eliminate expensive heating and time consuming controlled cooling steps normally associated with processing solid pearlising ingredients, as well as ensuring consistent performance. Addition levels of 0.5 - 2% are typically sufficient in most applications.
EMPIPEARL® XA 500 / X
EMPIPEARL® XA 500 / X is a concentrated blend of ingredients developed to give a pearlescent finish to formulated products. It can be used to provide a luxurious pearlescent finish to formulated products, such as shampoos, foam baths and shower gels. Using this concentrate will help to eliminate expensive heating and time consuming controlled cooling steps normally associated with processing solid pearlising ingredients as well as ensuring consistent performance. Addition levels of 0.5 - 2% are typically sufficient in most applications.
EMPIWAX® CL
EMPIWAX® CL is a non ionic oil-in water emulsifier blend. It is a versatile emulsifying wax used in the formulation of creams, lotions and other cosmetics which contain oil and water.
EMPIWAX® SK / BP
EMPIWAX® SK / BP is a self emulsifying wax based on fatty alcohol and sodium lauryl sulfate. The product is a versatile self-emulsifying wax used in the formulation of creams and lotions, principally in the cosmetic industry.
Emulsil® 710
Emulsil® 710 contains a PEG-free crosspolymer, water-in-silicone emulsifier, and dimethicone as the carrier fluid. Designed for use with co-emulsifier Emulsil® 610. Produces stable Water-in-Silicone emulsions for skin and color cosmetic applications. Emulsions created with this emulsifier have excellent water-holding ability and can be used to prepare emulsions that give a soft, rich feel. In addition, Emulsil® 710 allows the formulator to develop lotions, creams, and gels with unique transforming textures that are achieved by controlling the water-break feature. Typical use level 2 – 5%.
EMULSIL® CC-30
EMULSIL® CC-30 is a 35% active cationic emulsion of in strongly cationic amino functional silicone polymer. Contains non-tallow derived quaternary-amine surfactant and a biodegradable non-ionic surfactant. Suitable for use in rinse-off, leave-in conditioners and detangling products. Typical use levels are up to 5%.
Emulsil® CC-40
Emulsil® CC-40 is a 35% active cationic emulsion of an amino-functional silicone polymer. It contains a non-tallow derived quaternary-amine surfactant and a biodegradable non-ionic surfactant. Emulsil® CC-40 is suitable for use in rinse-off and leave-in conditioners and de-tangling products. The typical use level is 3 to 6% depending on application.
EMULSIL® CC-49
Emulsil® CC-49 is a 35% active cationic emulsion of an amino-functional silicone polymer. It contains a non-tallow derived quaternary-amine surfactant and a biodegradable non-ionic surfactant. Typical use levels are 3 to 6% depending on application. Compliance Highlights Available
Emulsil® CC-69
Emulsil® CC-69 is a cationic emulsion of 30% active amino-functional polymer that provides superior hair conditioning benefits. It is commonly used as a conditioning agent in hair care products. Typical use levels are 3 to 8% depending on application. Compliance Highlights Unavailable
EMULSIL® CT-50
EMULSIL® CT-50 is a 50% active emulsion of high molecular weight polydimethylsiloxane that can be used in hair care applications and shower gels. It improves wet-combing and shine in hair applications, imparts a soft feel on hair, and has no impact on foaming capabilites.
EMULSIL® S-290
EMULSIL® S-290 is an alkyl Dimethicone copolyol silicone emulsifier which is ideally suited to produce elegant W/O creams and lotions but without the greasiness and heaviness of typical water-in-oil systems. It is a non-ionic W/O emulsifier based on silicone.The combination of alkyl and PEG groups on the silicone backbone lead to an HLB value of 3 which provides emulsification and stabilization of W/O emulsions. The optimum range for total oil content is 22-35%.
EMULSIL® S-393
EMULSIL® S-393 is a highly water soluble copolyol that performs extremely well in shampoos and body washes where foam is most desirable. Conditioning of skin and hair can be obtained and gloss is often enhanced. EMULSIL® S-393 is compatible with a wide range of cosmetic ingredients.
EMULSIL® S-395
EMULSIL® S-395 is a silicone polyether soluble in water, alcohol or hydroalcoholic systems. It is used in a wide variety of cosmetic and personal care applications including as a resin plasticizer in hair sprays, emollient in skin care lotions and shaving products. This product is used as a wetting agent, surface tension depressant and emulsifier. EMULSIL® S-395 is typically used between 0.5 – 5% by weight.
EMULSIL® S-397
EMULSIL® S-397 is a 100% active nonionic silicone glycol copolymer dispersible in water, ethanol, and hydroalcoholic systems that reduces surface tension. Excellent co-emulsifier used to reduce the droplet size of the water-in-silicone and water-in-oil emulsions. Used to solubilize many botanical extracts into anhydrous formulations. In addition, it is used as a foam modifier in surfactant cleansers.
EMULSIL® S-399
EMULSIL® S-399 is a silicone polyether modified, branched water-in-silicone and water-in-oil emulsifiers designed to create low to medium viscosity emulsions. Provides oil phase flexibility for the emulsification of both silicone and organic oils in the oil phase. EMULSIL® S-399 is an ideal emulsifier for a wide range of cosmetic and personal care products. Dispersible in water, alcohol and hydro-alcoholic systems. Use level 1 – 5%.
EMULSIL® TSA-60
EMULSIL® TSA-60 is a 60% active nonionic emulsion of a strongly high molecular weight cationic amino functional silicone polymer. Compatible with anionic, cationic, and nonionic surfactant systems. Due to its high amine content and high molecular weight, this material is very substantive to hair and provides excellent conditioning.
EMULSIL® WO-5115
EMULSIL® WO-5115 fluid is excellent in preparing water-in-oil cosmetic and personal care emulsions with a silicone base. It is low odor, produces less greasy water-in-oil products, has improved water repellency, rich application feel, and no heat required for stability without silicone emulsions. This product is suitable for hair care and skin care applications.
EMULSIL® WO-5116
EMULSIL® WO-5116 is cyclic free water-in-silicone emulsifier dispersed in volatile dimethicone. Useful in preparing elegant cosmetic and personal care emulsions including antiperspirants/deodorants, skin care lotions and creams, protective lotions, sunscreens and Liquid and cream foundations. Delivers both polar and non-polar ingredients.
Finsolv® PG-22
Finsolv® PG-22 is an efficient skin conditioning agent functioning as both a humectant and emollient. It is an outstanding solubiliser for sunscreen actives, allowing for the active materials to function at maximum efficiency in formulations. It provides similar moisturisation properties over time as petrolatum but without the greasy after-feel making it an ideal candidate for day creams and lotions containing UV filters. It can also be used in clear, personal care products such as antiperspirants and deodorants.
Finsolv® TN
Finsolv® TN is an unique non-toxic, non-irritating, non-sensitizing, noncomedogenic and practically odorless emollient ester. It is water insoluble, readily emulsifiable. This product is a superior solubiliser of lipophilic cosmetic raw materials, especially sunscreen agents and volatile silicones, has a high positive spreading coefficient, anti-tack agent and anti-whitening, imparts a dry lubricating feel even in the presence of large amounts of mineral oil or petrolatum, and is a wetting agent and auxiliary suspending agent for water insoluble powdered products.
Finsolv® TN-O
Finsolv® TN-O is a further refined version of C12-15 Alkyl Benzoate which has been rendered odor free. It is recommended for those instances where even slight background odor from formulation ingredients conflicts with the desired characteristics of the final fragrance. It confers a dry, talc-like feel, is extremely mild to skin and eyes, spreads easily (high spreading coefficient) and is a valuable solvent for many cosmetic ingredients, including sunscreens.
Finsolv® TPP
Finsolv® TPP is a proprietary blend of three unique benzoate esters, which exhibit performance synergy in numerous personal care product areas: exceptional solvent for sunscreen actives, exhibits exceptional tactile and performance improvements over the individual materials, and is soluble in a wider range of materials than its individual components.
Frizzblend 3999
Frizzblend 3999 is a ready to use serum base composed of a high molecular weight hindered-amine functional silicone polymer and a high molecular weight polydimethylsiloxane delivered by cyclopentasiloxane as the carrier fluid. No dilution is required but flexible enough to add fragrance and your care ingredients of choice. Frizzblend 3999 has the optimum level of Frizzblend MAX to provide superior frizz control, curl definition and curl memory. The cyclopentasiloxane carrier provides spreadability, facilitates film formation on the hair fiber and compatibility with many care ingredients. Cyclic free versions available.
Frizzblend MAX
Frizzblend MAX is a patent pending blend of a hindered amine function silicone polymer delivered in a volatile carrier that provides long lasting high humidity frizz control. Compliance Highlights Unavailable
Frizzblend MAX-CF
Frizzblend MAX-CF (cyclic free version) is a patent pending blend of a hindered amine function silicone polymer delivered in a volatile carrier that provides long lasting high humidity frizz control Compliance Highlights Unavailable
GELAID® 5561
Gelaid® 5561 is a high-solids shine serum that contains a high molecular weight elastomer delivered from Cyclopentasiloxane and a volatile dimethicone, which is used to thicken anhydrous serums and sprays. Gelaid® 5561 can also be used as an additive to hair conditioners and skin care creams and lotions to provide a silky feel. Contains less than 0.1% of cyclo tetra siloxane.
GELAID® 5565
Gelaid® 5565 is a high-solids shine serum that contains a high molecular weight elastomer delivered from Cyclopentasiloxane and a volatile dimethicone, which is used to thicken anhydrous serums and sprays. Gelaid® 5565 can also be used as an additive to hair conditioners and skin care creams and lotions to provide a silky feel.
GELAID® 8205
Gelaid® 8205 is a high solids, a balanced composition comprised of Cyclopentasiloxane and an ultra-high molecular weight dimethicone specially designed to increase the viscosity of silicone-based serums. Compliance Highlights Unavailable
GELAID® CPDP
GELAID® CPDP is a blend specifically designed for making refractive index products. It imparts a rich applications feel, improves water repellency, and gives less greasy water-in-oil results. This product is suitable for hair care, skin care, and cosmetic applications.
Gelaid® CPDP-CF
Gelaid® CPDP-CF is a high-viscosity, balanced composition comprised of a partially volatile dimethicone carrier fluid, phenyl dimethicone, and an ultra-high viscosity dimethicone designed to increase the viscosity and refractive index of silicone-based serums. Gelaid® CPDP-CF provides high gloss and thermal protection.
GELAID® CPE
Gelaid® CPE is a silicone-based cold process-emulsifying agent used to formulate multi-phasic products. Gelaid® CPE delivers both water and micronized silicone crosspolymer gels that provide application lubrication. It is frequently used as a delivery system for both water-soluble and oil soluble actives such as PVP, menthol, Vitamin E, natural oils, and other actives. Gelaid® CPE is also used to create clear silicone-in-water emulsions by using the refractive index matching technique.
GELAID® CPE-CF
Gelaid® CPE-CF is a silicone-based cold process-emulsifying agent used to formulate multi-phasic products. Gelaid® CPE-CF delivers both water and micronized silicone crosspolymer gels that provide application lubrication. It is frequently used as a delivery system for both water-soluble and oil soluble actives such as PVP, menthol, Vitamin E, natural oils, and other actives. Gelaid® CPE-CF is also used to create clear silicone-in-water emulsions by using the refractive index matching technique.
Gemtex SC-85-P
GEMTEX SC-85-P is a concentrated sulfosuccinate-type wetting agent, having outstanding wetting, penetrating, and surface tension-depressing properties. The high active content of GEMTEX SC-85-P provides for the lowest cost of solids and for economy of storage.
InnoSil 046
InnoSil 046 is a cyclic free balanced combination of polydimethylsiloxanes that provides comparable cyclohexasiloxane volatility and is compatible with a wide range of cosmetic ingredients. This product is useful in a variety of applications where extended rub-in application time is desired. InnoSil 046 spreads easily during use and improves the application aesthetics, leaving the skin and hair with
InnoSil 1486-DM
InnoSil 1486-DM is a cyclic free composition of polydimethylsiloxanes, isododecane, and an ultra-high molecular weight dimethicone fluid. InnoSil 1486-DM has comparable volatility and application aesthetics as Cosmetic Fluid 1486-DM. Compliance Highlights Unavailable
InnoSil 1580-OH
InnoSil 1580-OH is cyclic free composition of polydimethylsiloxanes, isododecane, and an ultra-high molecular weight dimethiconol fluid. InnoSil 1580-OH has comparable volatility and application aesthetics as Cosmetic Fluid 1585-OH. Compliance Highlights Unavailable
InnoSil 1581-DM
InnoSil 1581-DM is a cyclic free composition of polydimethylsiloxanes, isododecane, and an ultra-high molecular weight dimethicone fluid. InnoSil 1581-DM has comparable volatility and application aesthetics as Cosmetic Fluid 1486-DM. Compliance Highlights Unavailable
InnoSil 1585-OH
InnoSil 1585-OH is a cyclic free composition of polydimethylsiloxanes, isododecane, and an ultra-high molecular weight dimethiconol fluid. InnoSil 1585-OH has comparable volatility and application esthetics as Cosmetic Fluid 1585-OH. Compliance Highlights Unavailable
InnoSil 1586-DM
InnoSil 1586-DM is a cyclic free composition of polydimethylsiloxanes, isododecane, and an ultra-high molecular weight dimethicone fluid. InnoSil 1586-DM has comparable volatility and application aesthetics as Cosmetic Fluid 1486-DM. Compliance Highlights Unavailable
InnoSil 1589-OH
InnoSil 1589-OH is a cyclic-free blend comprised of polydimethylsiloxanes, isododecane, and an ultra-high molecular weight dimethiconol fluid. It is used to control the viscosity of hair serums. Typical use level is 40 – 60%. Compliance Highlights Unavailable
InnoSil 1883-DM
InnoSil 1883-DM is a cyclic free composition of polydimethylsiloxanes, and an ultra-high molecular weight dimethiconol fluid. Compliance Highlights Unavailable
InnoSil 904
InnoSil 904 is a cyclic free composition containing a balanced combination of polydimethylsiloxanes that provides comparable cyclotetrasiloxane volatility. This product is compatible with a wide range of cosmetic ingredients and is useful in the development of antiperspirants, cosmetic stick products, and other applications where high volatility and faster dry down time is desired.
InnoSil 905
InnoSil 905 is a cyclic-free product consisting of polydimethylsiloxanes that provides comparable volatility to cyclopentasiloxane. It is useful in developing hair treatment sprays and serums in countries where VOC limits are regulated. InnoSil 905 can also be used as an additive for skin care and sun care products to enhance application aesthetics.
InnoSil 926
InnoSil 926 is a cyclic free balanced composition of polydimethylsiloxanes and isoparaffins that provides comparable cyclohexasiloxane volatility. This product is useful in thermal protectants sprays and serums and skin care applications where extended rub-in application time is desired.
InnoSil 981
InnoSil 981 is a cyclic free balanced combination of polydimethylsiloxanes and isoalkane that is volatile at styling iron temperatures. Provides excellent thermal protection. Can be used alone or with your choice of additives to formulate pump spray thermal protectants. Dependent upon application, typical usage level is 1-40%.
Iselux®
Iselux® is a mild surfactant that is used in formulations as a primary or secondary surfactant. Iselux® produces a dense, luxurious foam and an elegant after-feel. When used in combination with amphoteric surfactants, Iselux® will build viscosity in formulations. It provides gentle yet thorough cleansing with outstanding rinseability. Its excellent water solubility properties allow the formulator to produce cleansing systems that are hydrolytically stable over a broad pH range. Iselux® is preservative-free and works well with Trisodium Ethylenediamine Disuccinate (Natrlquest® E30), Innospec’s biodegradable chelant, to produce crystal-clear products. Iselux® MB is available to purchase as an RSPO Mass Balance certified material upon request.
Iselux® CO
Iselux® CO is a mild, 100% coconut based surfactant that is used in formulations as a primary or secondary surfactant. Iselux® CO produces a dense, luxurious foam and an elegant after-feel. When used in combination with amphoteric surfactants, Iselux® CO will build viscosity in formulations. It provides gentle, yet thorough cleansing with outstanding rinseability. Its excellent water solubility properties allow the formulator to produce cleansing systems that are hydrolytically stable over a broad pH range. Iselux® CO is preservative-free and works well with Trisodium Ethylenediamine Disuccinate (Natrlquest® E30), Innospec’s biodegradable chelant, to produce crystal-clear products. Typical usage levels of chelating agent are 0.3% active chelant per 10% active Iselux® CO.
Iselux® LQ-CLR
Iselux® LQ-CLR is an extremely mild surfactant that can be used in formulations as a primary or secondary surfactant and is ideally used where a dense, luxurious foam and elegant after-feel is desired. It provides gentle yet thorough cleansing with outstanding rinseability. The excellent water solubility properties allow the formulator to produce crystal clear liquid cleansing systems.
Iselux® LQ-CLR-PE
Iselux® LQ-CLR-PE is an extremely mild surfactant that is ideal for use in shower gels, facial cleansers, shampoos, liquid cleansing systems, and luxury foam baths. It that can be used in formulations as a primary or secondary surfactant and is ideally used where a dense, luxurious foam and elegant after-feel is desired. It provides gentle yet thorough cleansing with outstanding rinseability. The excellent water solubility properties allow the formulator to produce crystal clear liquid cleansing systems.
Iselux® LQ-CLR-SB
Iselux® LQ-CLR-SB is an extremely mild surfactant that is ideal for use in shower gels, facial cleansers, shampoos, liquid cleansing systems, and luxury foam baths. It that can be used in formulations as a primary or secondary surfactant and is ideally used where a dense, luxurious foam and elegant after-feel is desired. It provides gentle yet thorough cleansing with outstanding rinseability. The excellent water solubility properties allow the formulator to produce crystal clear liquid cleansing systems.
Iselux® SCMI
Iselux® SCMI is a mild anionic surfactant that is used in formulations as a primary or secondary surfactant. Iselux® SCMI produces a dense, luxurious foam and elegant after-feel. When used in combination with amphoteric surfactants, co-surfactants, and sodium chloride, this product will build viscosity in formulations. The excellent water solubility properties allow the formulator to produce cleansing systems that are hydrolytically stable over a broad pH range. Iselux® SCMI is preservative free and works well with Trisodium Ethylenediamine Disuccinate (Natrlquest® E30) Innospec’s biodegradable chelant, to produce clear products.
Iselux® SCMI MB
Iselux® SCMI MB is the RSPO Mass Balance certified version of Iselux® SCMI.
Iselux® SFS
Iselux® SFS is a concentrated surfactant blend developed for use in sulfate-free personal care products such as shampoos and bodywashes. It is an optimized blend designed for ease of use in cleanser formulas. This concentrate only requires the addition of water for dilution and salt to thicken in order to develop a stable finished formulation.
Iselux® SFS-SB
Iselux® SFS-SB is a concentrated surfactant blend developed for use in sulfate-free personal care products such as shampoos and bodywashes. It is an optimized blend designed for ease of use in cleanser formulas. This concentrate only requires the addition of water for dilution and salt to thicken in order to develop a stable finished formulation. This blend is free from sulfates, EO, amides, and is readily biodegradable. All of its components are derived from natural, readily renewable resources (plant derived)
Iselux® SLC
Iselux® SLC is a concentrated surfactant blend developed for use in formulating structured sulfate-free personal care products. It is an optimized blend designed for use in cleanser formulas where the addition of a high level of oils or otherwise incompatible materials is desired. This concentrate allows a formulator to quickly and easily develop stable finished formulations. It is ideal for use in body washes, shampoos and hand washes.
Iselux® Ultra Mild
Iselux® Ultra Mild is a concentrated surfactant blend developed for use in cleanser applications where an ultra-mild formulation is desired. It is an optimized blend designed for ease of use and cold processing in cleanser formulas. This concentrate only requires the addition of water for dilution, desired actives, fragrance and conditioning polymers and electrolyte and/or pH adjustment for desired viscosity in order to develop a stable finished formulation.
Iselux® Ultra Mild MB
Iselux® Ultra Mild MB is a concentrated surfactant blend developed for use in cleanser applications where a gentle formulation is desired. It is an RSPO mass balanced version of Iselux® Ultra Mild. Iselux® Ultra Mild MB is ideal for use in face wash, baby wash, baby shampoo, feminine wash, etc.
LAUREX® CS
LAUREX® CS is a straight chain cetyl-stearyl alcohol, provided in flakes for ease of handling. It is a versatile wax that can be used to modify the consistency and feel of cosmetic creams and lotions for skin and hair care.
Luxuriact
Luxuriact is an approximately 28% active anionic surfactant that provides exceptional foam and easy rinsibility. The unique characteristic of Luxuriact is the clarity and pourability of this raw material at room temperature. This contributes to the easy handling and incorporation of this ingredient into a formulation. It can be used as a primary surfactant at use levels up to 30% w/w where it provides extraordinary foam in a variety of cleansing formulas. It is compatible with non-ionic, anionic and amphoteric surfactants. Luxuriact is stable across a broad pH range from 3.0 – 11.0.
Maritech® Bright
Maritech® Bright is a clinically proven skin brightening ingredient which significantly increases radiance and reduces the pigmentation of age spots. Maritech® Bright is extracted from the polyphenol-rich macroalgae Fucus vesiculosus and delivers benefits not found in any other natural skin care ingredient. Maritech® Bright combines fucoidan with algal polyphenols, renowned for their powerful antioxidant activity, making it an effective and versatile ingredient for brightening and anti-ageing applications.
Maritech® Reverse
Maritech® Reverse is a high-purity fucoidan extract developed specifically for anti-aging formulations. Derived from the Undaria pinnatifida species of seaweed, this unique natural ingredient has been shown to inhibit many of the key enzymes responsible for skin damage. This unique extract is COSMOS organic certified and delivers a powerful combination of protective, soothing and anti-aging properties in one natural ingredient.
MICROSIL® FINISH
MICROSIL® FINISH is a clear 30% aqueous cationic micro emulsion. It is a balanced combination of patented cationic hindered amine functional silicone polymers in combination with premium cationic organic quaternium salts. This versatile cationic complex was developed as a premium conditioning additive with ease in formulating crème conditioners, hair treatment products, leave-on hair treatments, and styling aids.
MICROSIL® HAF-HV
MICROSIL® HAF-HV is a cationic microemulsion containing a high molecular weight hindered amine functional silicone in water. It improves softness and shine in hair care formulations and brings out highlights in color treated hair. This product has low toxicity and clear compatibility with anionic shampoo systems.
MICROSIL® HAF-MV PF
Microsil® HAF-MV PF is a microemulsion containing a medium molecular weight hindered amine functional silicone in water. This technology is formulated to provide conditioning benefits to hair care products without compromising the viscosity and clarity. The usage level is 5 – 15% w/w depending upon application.
MICROSIL® HAF-MV-30
MICROSIL® HAF-MV-30 is a clear cationic microemulsion. It contains a medium molecular weight. This product is a hindered amine functional silicone in an aqueous base. MICROSIL® HAF-MV-30 improves softness and shine in hair care formulations and is excellent for bringing out highlights in color treated hair. This product has low toxicity and clear compatibility with anionic shampoo systems.
Microsil® Volume PF
Microsil® Volume PF is a microemulsion comprised of a hindered amine functional silicone polymer in combination with an organic quaternium salt. Microsil® Volume PF is used at 5 – 10% w/w in a finished formulation to provide increased hair volume. Compliance Highlights Unavailable
NANSA® HS 80 / NPF
NANSA® HS 80 / NPF is sodium alkylbenzene sulphonate powder based on a predominately straight chain C10-13 alkylbenzene (dodecylbenzene). It is a high active anionic surfactant particularly suited to provide wetting, detergency and emulsification in a wide range of applications, including laundry detergents, surface cleaners and hygienic blocks. The physical form allows direct incorporation into powders, compressed tablets and blocks.
NANSA® HS 80/S
NANSA® HS 80/S is dried sodium C10-13 alkylbenzene sulfonate. It is a high active anionic surfactant particularly suited to provide wetting, detergency and emulsification in a wide range of applications, including laundry detergents, surface cleaners and hygienic blocks. The physical form allows direct incorporation into powders, compressed tablets and blocks.
NANSA® HS 85 / NPF
NANSA® HS 85 / NPF is sodium alkylbenzene sulphonate powder based on a predominately straight chain C10-13 alkylbenzene (dodecylbenzene). It is a high active anionic surfactant particularly suited to provide wetting, detergency and emulsification in a wide range of applications, including laundry detergents, surface cleaners and hygienic blocks. The physical form allows direct incorporation into powders, compressed tablets and blocks.
NANSA® HS 85 / S
NANSA® HS 85 / S is dried sodium C10-13 alkylbenzene sulfonate. This product is a high active anionic surfactant particularly suited to provide wetting, detergency and emulsification in a wide range of applications, including laundry detergents, surface cleaners and hygienic blocks. The physical form allows direct incorporation into powders, compressed tablets and blocks.
NANSA® HS 90 / S
NANSA ® HS 90 / S is a high active sodium alkyl benzene sulphonate based on a predominately straight chain alkylate. It is a high active anionic surfactant particularly suited to provide wetting, detergency and emulsification in a wide range of applications, including laundry detergents, surface cleaners and hygienic blocks. The physical form allows direct incorporation into powders, compressed tablets and blocks.
NANSA® HS 90 /NPF
NANSA® HS 90 / NPF is a sodium alkyl benzene sulfonate powder based on a predominately straight chain alkylate. This product does not contain phosphate or magnesium. This product is a high active anionic surfactant particularly suited to provide wetting, detergency and emulsification in a wide range of applications, including laundry detergents, surface cleaners and hygienic blocks. The physical form allows direct incorporation into powders, compressed tablets and blocks.
NANSA® LSS 38 / AS
NANSA ® LSS 38 / AS is an aqueous solution of sodium C14-16 alpha-olefin sulphonate. Alpha olefin sulfonates provide excellent foaming and detergency properties to a broad spectrum of formulations. They produce a high volume of stable and luxurious foam combining the benefits of alkyl ether sulfates and alkyl sulfates in a single product. In addition, alpha olefin sulfonates have excellent hard water and electrolyte tolerance and are stable in acidic conditions, making them ideal for use in all cleaning applications.
NANSA® LSS 38/U
NANSA® LSS 38/U is an aqueous solution of sodium C14-16 alpha-olefin sulfonate. Alpha olefin sulfonates provide excellent foaming and detergency properties to a broad spectrum of formulations. They produce a high volume of stable foam combining the benefits of alkyl ether sulfates and alkyl sulfates in a single product. In addition, alpha olefin sulfonates have excellent hard water and electrolyte tolerance and are stable in acidic conditions, making them ideal for use in all cleaning applications.
NANSA® LSS 480 / H
NANSA® LSS 480 / H is sodium C14 - 16 alpha-olefin sulfonate provided as the dried powder. Alpha olefin sulfonates provide excellent foaming and detergency properties to a broad spectrum of formulations. They produce a high volume of stable and luxurious foam combining the benefits of alkyl ether sulfates and alkyl sulfates in a single product. In addition, alpha olefin sulfonates have excellent hard water and electrolyte tolerance and are stable in acidic conditions, making them ideal for use in all cleaning applications. The powder form is particularly suitable for use in solid and highly concentrated formulations.
NANSA® LSS 495 / V
NANSA® LSS 495 / V is adried Sodium C14 - 16 alpha-olefin sulfonate in needles form. Alpha olefin sulfonates provide excellent foaming and detergency properties to a broad spectrum of formulations. They produce a high volume of stable and luxurious foam combining the benefits of alkyl ether sulfates and alkyl sulfates in a single product. In addition, alpha olefin sulfonates have excellent hard water and electrolyte tolerance and are stable in acidic conditions, making them ideal for use in all cleaning applications. The dried form is suitable for use in solid and highly concentrated formulations.
NANSA® LSS 495/H
NANSA® LSS 495 / H is sodium C14 - 16 alpha-olefin sulfonate provided as the dried powder. It provide excellent foaming and detergency properties to a broad spectrum of formulations. They produce a high volume of stable and luxurious foam combining the benefits of alkyl ether sulfates and alkyl sulfates in a single product. In addition, alpha olefin sulfonates have excellent hard water and electrolyte tolerance and are stable in acidic conditions, making them ideal for use in all cleaning applications. The powder form is particularly suitable for use in solid and highly concentrated formulations.
NANSA® PC 38 / F
NANSA® PC 38/F is an aqueous solution of a potassium fatty acid soap. Fatty acid soaps are commonly used surfactants for their cleaning and degreasing properties, but they can also help to control foam, for example in laundry liquids for automatic machine wash and other detergents, reducing the requirement to add additional de-foaming agents. They are also frequently used in personal care products and this product is ideal for use in liquid formulations, such as hand soaps for dispensers, shower and bath products, etc.
NANSA® SS 55/I
NANSA® SS 55/I is an aqueous solution of sodium C10-13 alkylbenzene sulfonate. It is a high active anionic surfactant particularly suited to provide wetting, detergency and emulsification in a wide range of applications. Compliance Highlights Unavailable
Natrlquest E30
Natrlquest E30 is a biodegradable chelating agent that is special in the fact that it is very selective towards problematic transition metals such as Cu and Fe compared to Ca and Mg. This makes it ideal in personal care formulations as it is tackling these problematic transition metals first while in the formulation, but still giving hard water control when released into water. This gives Natrlquest the benefit of excellent anti-oxidant properties and foam preservation in shampoos and conditioners.
Pureact 138
Pureact 138 is a natural, mild surfactant combination comprised of Decyl Glucoside and Sodium Lauroyl Lactylate. It is an optimized blend that requires no heat, is easy to use, and provides exceptional foaming. Compliance Highlights Available
Pureact BB
Pureact BB is a concentrated surfactant blend developed for economical sulfate-free personal care products. It is a high foaming, optimized blend producing crystal clear finished formulas. This concentrate only requires the addition of water for dilution and sodium chloride for viscosity adjustments.
Pureact GLT
Pureact GLT is a 20% active, naturally derived anionic surfactant produced from L-glutamic acid and lauric acid. It is a mild surfactant that is non-irritating and readily biodegradable. Pureact GLT produces moderate to good foam, offers a silky, soft after-feel and is effective at improving the skin mildness in surfactant formulas. The optimum formulating pH range for Pureact GLT is 4.0 – 10.
Pureact GLT-MB
Pureact GLT-MB is a naturally derived anionic surfactant produced from L-glutamic acid, a naturally occurring amino acid, and lauric acid. It is a mild surfactant that is non-irritating and readily biodegradable. Pureact GLT-MB produces moderate to good foam, offers a silky, soft after-feel and is effective at improving the skin mildness in surfactant formulas. Pureact GLT-MB is available to purchase as an RSPO Mass Balance certified material.
Pureact Gluco C
Pureact Gluco C is a light yellow turpid liquid produced made from natural and renewable raw materials, and it part of Pureact Gluco Range. They are readily biodegradable, very mild to skin and mucus membranes, and offers synergistic effects with other surfactants that reduces irritation and improves foam quality. This product can be used is cosmetic applications such as shampoos, body washes, facial cleansers, and bath oils.
Pureact Gluco D
Pureact Gluco D is a light yellow turpid liquid produced made from natural and renewable raw materials, and it part of Pureact Gluco Range. They are readily biodegradable, very mild to skin and mucus membranes, and offers synergistic effects with other surfactants that reduces irritation and improves foam quality. This product can be used is cosmetic applications such as shampoos, body washes, facial cleansers, and bath oils.
Pureact Gluco L
Pureact Gluco L is a light yellow turpid liquid/paste produced made from natural and renewable raw materials, and it part of Pureact Gluco Range. They are readily biodegradable, very mild to skin and mucus membranes, and offers synergistic effects with other surfactants that reduces irritation and improves foam quality. This product can be used is cosmetic applications such as shampoos, body washes, facial cleansers, and bath oils.
Pureact I-78 FLAKES
Pureact I-78 FLAKES is a practically salt-free surfactant especially designed for use in personal cleansing products. It combines mildness and resistance to hard and salt water with high foaming properties similar to soap. It is compatible with soap and gives excellent lime-soap dispersibility.
Pureact I-78C
Pureact I-78C is a mild surfactant specifically designed for use in personal cleansing products. This product is high foaming, nearly salt-free and is resistant to hard and salt water. It is compatible with soap and gives excellent lime-soap dispersibility in order to retard the formation of scum in bar soaps. It consists of short, variable length cylinders (“noodles”) of approximately 1 mm in diameter and is used in “combo bar” applications, shampoos, and bubble baths. Pureact I-78C is available to purchase as RSPO Mass balance certified material, Pureact I-78C MB, on request.
Pureact I-78C-A
Pureact I-78C-A is a mild, anionic surfactant designed for use in personal care cleansing products. Pureact I-78C-A is high foaming in both hard and soft water. Usage levels range from 2 to 60%, depending on the application. Pureact I-78C-A is naturally derived from coconut and is readily biodegradable. Pureact I-78C-A MB is available to purchase as an RSPO Mass Balanced certified material upon request.
Pureact I-78E Flakes
Pureact I-78E Flakes is an anionic surfactant specifically designed for use in personal cleansing products. Pureact I-78E Flakes is high foaming in both hard and soft water. It is compatible with soap and gives excellent lime-soap dispersibility to retard the formation of soap scum. Typical usage levels are 2 to 60% depending upon the application. Pureact I-78E Flakes MB is available to purchase as an RSPO mass balance certified material upon request.
Pureact I-78P
Pureact I-78P is a mild, sulfate free surfactant used in personal care cleansing products. This unique, powdered surfactant is derived from coconut and considered readily biodegradable. It produces dense lather that contributes to overall foam stability of finished formulations. Optimum pH range is 6.0 to 8.0 with the exception of soap bars where the pH can be slightly lower in some formulas. Usage levels range from 1-5% in liquid formulations to 2-60% in syndet bars.
Pureact I-80 Flake
Pureact I-80 Flake is an anionic surfactant specifically designed for use in personal cleansing products. Pureact I-80 Flake is a high foaming, nearly salt-free and works in both hard and soft water. It is compatible with soap and gives excellent lime-soap dispersibility to retard the formation of soap scum. Typical usage levels are 2 to 60% depending on the application. Pureact I-80 MB Flake is available to purchase as an RSPO mass balance certified material upon request.
Pureact I-80P
Pureact I-80P is a mild surfactant specifically designed for use in personal cleansing products. Pureact I-80P is high foaming, nearly salt-free and is resistant to hard and salt water. It is compatible with soap and gives excellent lime-soap dispersibility in order to retard the formation of scum in bar soaps.
Pureact I-85C
Pureact I-85C is a mild surfactant that is specifically designed for use in personal cleansing products. Pureact I-85C provides a dense, creamy lather as well as high foaming properties similar to soap. It is almost completely salt-free, compatible with soap, and provides resistance to hard and salt water. It also affords excellent lime-soap dispersability.
Pureact I-85E Flake
Pureact I-85E Flake is a mild surfactant that is specifically designed for use in personal cleansing products. Pureact I-85E Flake provides a dense, creamy lather as well as high foaming properties similar to soap. It is almost completely salt-free, compatible with soap, and provides resistance to hard and salt water. It also affords excellent lime-soap dispersability. Pureact I-85E Flake is available to purchase as RSPO Mass balance certified material, Pureact I-85E Flake MB, on request.
Pureact I-85EC
Pureact I-85EC is a mild surfactant that is specifically designed for use in personal cleansing products. Pureact I-85EC provides a dense, creamy lather as well as high foaming properties similar to soap. It is almost completely salt-free, compatible with soap, and provides resistance to hard and salt water. It also affords excellent lime-soap dispersability. Pureact I-85EC Flake is available to purchase as RSPO Mass balance certified material, Pureact I-85EC Flake MB, on request.
Pureact I-85F
Pureact I-85F is a high active, high purity grade of Sodium Cocoyl Isethionate especially designed for use in personal cleaning products. This product is a mild surfactant specifically designed for use in personal cleansing products. Pureact I-85F is high foaming, nearly salt-free and is resistant to hard and salt water. It is compatible with soap and gives excellent lime-soap dispersibility in order to retard the formation of scum in bar soaps.
Pureact I-85P
Pureact I-85P is a high active, high purity grade of Sodium Cocoyl Isethionate especially designed for use in personal cleaning products. This product is a mild surfactant specifically designed for use in personal cleansing products. Pureact I-85F is high foaming, nearly salt-free and is resistant to hard and salt water. It is compatible with soap and gives excellent lime-soap dispersibility in order to retard the formation of scum in bar soaps.
Pureact LAA
Pureact LAA is an amphoteric surfactant used in personal care products as well as in household and industrial applications. It is a mild surfactant with high foaming properties and the unique ability to reduce irritation from other co-surfactants. This makes it ideal for use in shampoo and cleanser formulations.
Pureact LSR
Pureact LSR is an anionic surfactant used in personal care products as well as in household and industrial applications. It is naturally derived, sulfate-free and biodegradable. Pureact LSR is often used as a co-surfactant in cleanser formulations such as shampoos and bodywashes. It can also be used in oral care applications such as toothpastes and incorporated into syndet and combo bars.
Pureact MD-318
Pureact MD-318 is the disodium salt of a substituted isopropanolamide half ester sulfosuccinate. This high active, non-irritating, high foaming surfactant exhibits excellent water solubility and good tolerance to polyelectrolytes. Pureact MD-318 functions as a gentle effective cleansing agent in shampoos, bath products and facial cleansers. Its compatibility with cationic conditioners makes it useful in the formulation of clear and mild systems, while providing the foaming characteristics desirable in contemporary personal care cleansers.
Pureact MS-CG
Pureact MS-CG is a low odor and color oleoyl taurate. It is a sulfate-free, mild surfactant that is often used in personal care cleansing applications such as shampoos and bodywashes. It produces moderate foam and is stable over a broad pH range, making it ideal for anti-acne applications. It is along-chain surfactant so it can also help build viscosity in surfactant formulations.
Pureact MS-CG MB
Pureact MS-CG is a low odor and color oleoyl taurate. It is a sulfate-free, mild surfactant that is often used in personal care cleansing applications such as shampoos and bodywashes. It produces moderate foam and is stable over a broad pH range, making it ideal for anti-acne applications. It is along-chain surfactant so it can also help build viscosity in surfactant formulations.
Pureact OCT
Pureact OCT is a high active version of sodium methyl cocoyl taurate in a powder form. This mild anionic surfactant provides exceptional wetting and foaming properties. It is a low-irritating product designed for use in oral care applications such as toothpaste and tooth cleansing tablets. It is compatible with non-ionic, anionic and amphoteric surfactants. Pureact OCT chemically stable in acid and basic conditions as well as in the presence of metal ions. Pureact OCT is suitable for use in gum sensitive toothpastes at recommended use levels of 1-10%.
Pureact SCG
Pureact SCG is a mild anionic surfactant that is 86% naturally derived from vegetable feedstock. This surfactant is sulfate-free and readily biodegradable. Pureact SCG not only enhances foam height but also provides a rich, creamy lather to formulations. It exemplifies good synergy with fatty acids and soap. Typical usage levels range from 20 to 40% w/w as a primary surfactant and 1 to 10% w/w as a co-surfactant. Pureact SCG MB, a RSPO mass balanced version, is available upon request.
Pureact SCG MB
Pureact SCG MB is a RSPO mass balanced version of Pureact SCG, a mild anionic surfactant that is 86% naturally derived from vegetable feedstock. This surfactant is sulfate-free and readily biodegradable. Pureact SCG not only enhances foam height but also provides a rich, creamy lather to formulations. It exemplifies good synergy with fatty acids and soap. Typical usage levels range from 20 to 40% w/w as a primary surfactant and 1 to 10% w/w as a co-surfactant.
Pureact SFB
Pureact SFB is a specially optimized, concentrated surfactant blend for use in personal care products. This cold process blend is free from sulfates and sodium chloride. Usage level is 25-40% depending upon the application. Typical applications include shampoo, body wash, and liquid cleanser.
Pureact SFB MB
Pureact SFB is a specially optimized, concentrated surfactant blend for use in personal care products. This cold process blend is free from sulfates and sodium chloride. Usage level is 25-40% depending upon the application. Typical applications include shampoo, body wash, and liquid cleanser. Pureact SFB MB is a Mass Balanced option to ensure responsible
Pureact SI
Pureact SI is a water soluble anionic material used in personal care products as well as in household and industrial applications. It is naturally derived and sulfate-free. This product is often used as an alternative to electrolytes such as sodium chloride in order to thicken surfactant systems. Its applications include detergent bars, bubble baths, dispersants, shampoos and emulsifiers.
Pureact SLG
Pureact SLG is a mild anionic surfactant used in personal care cleansing products. It is sourced from naturally derived vegetable feedstocks and is based on the amino acid, glycine, which is utilized by the human body for the synthesis of collagen. It is preservative-free, EO-free, sulfate-free and readily biodegradable. Pureact SLG provides a rich creamy lather to formulations. It is often used in personal cleansing products such as shampoos, bodywashes, and facial cleansers.
Pureact SLI
Pureact SLI is a mild surfactant specifically designed for use in personal cleansing products. It is a high foaming product that provides a dense, creamy lather to formulations. Pureact SLI is nearly salt-free and resistant to hard and salt water with high foaming properties. It is compatible with soap and gives excellent lime-soap dispersibility in order to retard the formation of scum in bar soaps.
Pureact SNDT-65
Pureact SNDT-65 is a blend of Sodium Cocoyl Isethionate (SCI) and Stearic Acid which is manufactured in the molten state as a liquid - liquid solution. Sold as easily handled flakes, Pureact SNDT-65 is specifically designed for those occasions, particularly in solid formulations, where a smooth mixture of SCI and Stearic Acid is required. Of particular note is the use of Pureact SNDT-65 in the preparation of syndet bars on conventional soap-making machinery.
Pureact SNDT-65 CO
Pureact SNDT-65 CO is an optimized blend of Sodium Cocoyl Isethionate and Myristic Acid that is produced from 100% coconut-based fatty acid. Sold as easily handled flakes, Pureact SNDT-65 CO is specifically designed for making solid cleansing products with a smooth texture and luxurious lather.
Pureact SNDT-LO
Pureact SNDT-LO is a unique, ready-to-use, flaked base which can be used as is or blended with soap to produce exceptionally mild high quality syndet or combo bars for the personal care market. It is designed to process easily in conventional soap processing equipment. Simply add the base to the amalgamator, incorporate fragrance and color and refine as normal. In addition, the base can be blended with soap, in all proportions, to produce exceptional combo bars.
Pureact T-A
Pureact T-A is an ethylene oxide condensate. When converted to a salt by neutralization, a crypto-anionic salt of the base is formed. Pureact T-A is compatible with nonionics, anionics and cationics with detersive, wetting and emulsifying properties. It can be used as a buffer in acid detergents, as a detergent, wetting agent and dispersant in metal cleaning and processing, as a compatibilising agent in cationic-anionic formulations, and in conditioning shampoos containing anionic detergents and cationic polymers.
Pureact TR-L90
Pureact TR-L90 is a unique, sodium chloride-free version of Sodium Methyl Lauroyl Taurate. It is naturally derived from vegetable sources and is readily biodegradable. Unlike most cocoyl taurates, the Pureact TR-L90 is available in flake or chip form. Compliance Highlights Available
Pureact WLL
Pureact WLL is the sodium salt of the methyl carboxy derivative of ethoxylated lauryl alcohol. It is a moderate to high flash foamer with good rinsability. It has outstanding stability to alkali, acid and electrolytes along with excellent thermal stability. It is compatible with nonionics, anionics and most cationics.
Pureact WNT Gel
Pureact WNT Gel is a unique concentrated surfactant combining the desired properties of nonionics and soaps. It is an excellent wetting and emulsifying agent possessing good detergency over a wide pH range. Pureact WNT Gel is stable in alkaline (pH 10) and acid solutions at the boil and efficient in hard water. Pureact WNT Gel is compatible with all nonionic and anionic surfactants as well as with most cationics.
Pureact WS
Pureact WS is a taurate surfactant that is naturally derived from coconuts and can be used in many cosmetic preparations and shampoos due to its excellent foaming properties, lubricity, detergency and mildness. Pureact WS is compatible with all nonionic and anionic surfactants, is stable over the entire pH range and is effective even under hard water.
Pureact WS Conc.
Pureact WS Conc. is a 30% active material that is manufactured in paste form and has a higher activity than other commercially available cocoyl taurate surfactants. It is compatible with all nonionic and anionic surfactants, is stable at extreme pH conditions, and is effective under hard water conditions. Pureact WS Conc. provides exceptional foaming and a flash foam that provides large, lacey bubbles. It is considered sulfate-free and can be used in many cosmetic preparations, and shampoos due to its excellent foaming properties, lubricity, detergency, and mildness.
Pureact WS-28
Pureact WS-28 is an approximately 28% active anionic surfactant paste that provides exceptional foam and easy rinsibility. It can be used as a primary surfactant at use levels up to 30% active where it provides extraordinary foam in a variety of cleansing formulas. It is compatible with non-ionic, anionic and amphoteric surfactants. Pureact WS-28 is stable across a broad pH range from 3.0 – 11.0.
Pureact WS-70
Pureact WS-70 is an approximately 20% active material that is manufactured in a liquid form and is designed specifically for ease of handling. It is compatible with all nonionic and anionic surfactants, is stable at extreme pH conditions, and is effective under hard water conditions. Pureact WS-70 provides exceptional foaming and a flash foam that provides large lacey bubbles. It is considered sulfate-free and can be used as a primary surfactant at use levels of up to 40%. It can also be used in clear systems.
Shineblend® 8020G
Shineblend® 8020G is a product comprising C13-14 Isoalkane and Dimethiconol for a light soft feeling on the hair that leaves the hair looking healthier. A premium serum shine enhancer that reduces fly-away. It can be used as a stand-alone formulation base.
Shineblend® 8032MG
Shineblend® 8032MG is a product comprising C13-14 Isoalkane, C10-11 Isoalkane, and Dimethiconol for a light, soft feel on the hair that leaves the hair looking healthier. A premium serum shine enhancer that reduces fly-away. Ready to use as a formulation base.
Shineblend® 9503
Shineblend® 9503 is a multiple functional specially formulated hair-enhancing additive that dramatically reduces blow-drying time with the additional benefits of thermal protection humidity resistance. Shineblend® 9503 can be diluted for spray applications or thicken with a cosmetic fluid for a serum application.
Shineblend® 9615
Shineblend® 9615 is a product comprising Cyclotetrasiloxane, Cyclopentasiloxane, Phenyltrimethicone, and Dimethicone for a light, soft feeling on the hair that leaves hair looking healthier. A premium shine enhancer for pump or spray applications that will reduce frizz and fly-away but without an oily feeling.
Shineblend® 9710
Shineblend® 9710 contains a balanced combination of cyclomethicone and dimethicone for a light soft feeling on the hair that leaves the hair looking healthier. A shine enhancer for pump or spray applications that will add shine but not an oily feeling. Compliance Highlights Unavailable
Shineblend® Max
Shineblend® Max is a specially formulated shine enhancing additive for hair care and skin care applications. The patent pending, specialty formulation has been shown to provide a 100% increase in shine levels on hair as compared to other common raw materials like phenyl trimethicone or combinations of common silicones and esters. Typical use level range is 0.25% - 5%.
Specsil K-10
Specsil K-10 is a spherical silicone polymer powder comprised of a silicone rubber core bonded to a silicone resin surface. This amorphous 5-micron powder imparts an elegant soft, silky feel. Specsil K-10 offers good dispersibility and swells in the presence of Cyclopentasiloxane or dimethicone fluids to increase the viscosity. Typical use levels are 1.0 – 5.0% w/w depending upon the application.
Specsil K-11
Specsil K-11 is a spherical silicone polymer powder comprised of a silicone rubber core bonded to a silicone resin surface. This amorphous powder provides excellent lubricity and imparts an elegant soft, silky feel. Dispersible in silicones and many cosmetic ingredients. With an average particle size of 2-micron, Specsil K-11 is ideal for anti-aging applications. Typical use level is 0.5 – 5%.
Specsil K-12
Specsil K-12 is a water-in-silicone polyether modified emulsifying crosspolymer combined with dimethicone used to formulate stable water-in- silicone creams and gels containing as much as 90% water. Recommended to be combine with the co-emulsifier, Emulsil S-397, to obtain optimum stability and the ability to control desired water break level during application rub-in. Specsil K-12 is shear thinning to facilitate the dispersion of pigments or other cosmetic ingredients and enables the formulation of unique textures.
Specsil K-13
Specsil K-13 is a high-solids cross polymer gel delivered in Cyclopentasiloxane that provides a luxurious dry feel. Imparts a matte finish. Specsil K-13 provides excellent spreadability to formulations and disperses many common personal care additives such as esters and other silicones. Typical use level 15% - 40%.
Specsil K-17
Specsil K-17 is a silicone crosspolymer gel dispersed in dimethicone designed as a thickening agent for silicone and various oil formulations. Specsil K-17 maintains its viscosity upon dilution in cyclopentasiloxane and can suspend inorganic pigments particles such as glitter. It leaves skin with a powdery or talc like after-feel.
Specsil K-20
Specsil K-20 is a high molecular weight silicone elastomer in a non-volatile dimethicone. Acts as a thickening agent in anhydrous silicone fluids, water-in-oil, and water-in-silicone formulations. Aesthetic benefits include detackification, emolliency, lubricity and light silky after-feel. Typical use level 15 – 40%.
Specsil K-27
Specsil K-27 is a crosspolymer blend delivered from cyclopentasiloxane that is used to thicken anhydrous serums and sprays. Specsil K-27 provides excellent hair conditioning and thermal protection. When used in formulations can aid in the prevention and repair of split ends.
Specsil K-45
Specsil K-45 combines the benefits of an acrylate resin with a silicone polymer. When incorporated into a cosmetic formulation, Specsil K-45 delivers a long-lasting, soft, flexible film that provides excellent water, wash-off, transfer and sebum resistance. Specsil K-45 is also used to disperse powders into silicone fluids and improve stability. Typical use level 10 – 30%.
Specsil K-50
Specsil K-50 combines the adhesive properties of an acrylic polymer backbone with the flexibility of silicone sidechains for a soft flexible film formation that exhibits long lasting wear properties, water and oil repellency. Specsil K-50 has a 40% solid content and contains isododecane, which provides a quicker dry feeling when used in long lasting color cosmetic formulations. Specsil K-50 is cyclic free and is compatible with silicone and many cosmetic ingredients.
Specsil K-51
Specsil K-51 is a silicone crosspolymer gel with a luxurious dry feel. Leaves a matte finish on the skin with a powdery or talc like after-feel. Provides excellent spreadability to formulations and capable of dispersing many common personal care additives such as alcohols, esters, and silicones. Specsil K-51 is suitable for a variety of personal care applications. Typical use level 20 – 40%.
Specsil K-54
Specsil K-54 is a high refractive index, low-viscosity phenyl-modified silicone fluid commonly used to add gloss and sheen, thereby improving hair shine. Provides reduced tack, emolliency and water repellency to skin care products and used in lip care products to add shine. Compatible with a wide range of cosmetic oils and ethanol. Typical use level 1 – 10%.
Specsil K-56
Specsil K-56 is a high refractive index, low viscosity phenyl modified silicone polymer commonly used to add shine to hair care to improve hair shine. Specsil K-56 is used in in lip care products to add shine. Compliance Highlights Unavailable
Specsil K-57
Specsil K-57 is a high refractive index, low viscosity phenyl modified silicone polymer commonly used to add shine to hair care to improve hair shine. Specsil K-57 is used in lip care products to add shine. Compliance Highlights Unavailable
Specsil K-61
Specsil K-61 is a paste-like gel composed of silicone elastomer dispersed in low viscosity dimethicone. Designed as a thickening agent for silicone formulations, Specsil K-61 maintains its viscosity upon dilution in Cyclopentasiloxane and can suspend inorganic pigments particles such as glitter.
Specsil K-71
Specsil K-71 is a 100% silicone MQ resin. It is soluble in a number of different silicone fluids (low viscosity Dimethicone or Cyclopentasiloxane) and organic fluids up to concentrations of 50% or more. This silicone resin provides superior wash off resistance in a variety of cosmetic applications. It is easy to solubilize due to its larger particle size.
Specsil K-72
Specsil K-72 is 100% silicone MQ resin. It is soluble in a number of different silicone fluids (Dimethicone and Cyclopentasiloxane) and a number of organic materials up to concentrations of 50% or more. The silicone resin provides water and wash-off resistance in a variety of cosmetic applications. A pre-mix of Specsil K-72 with your solvent of choice should be made by slowly sprinkling the Specsil K-72 into the carrier fluid with moderate agitation to avoid lumping. Once completely added to the batch, mix until dissolved. Pre-mix should then be added to the oil phase of the formulation.
Specsil K-73
Specsil K-73 combines a very high molecular weight silicone MQ resin and cyclic volatile silicone fluid. Specsil K-73 forms a long-lasting, water-resistant film on the skin surface. An excellent choice to obtain water-resistant foundations, mascaras, and sunscreen formulations when long lasting wear is desired. Typical use level 4 -18%.
Specsil K-74
Specsil K-74 is a cyclic free blend of high molecular weight Trimethylsiloxysilicate film-former delivered from a non- volatile Dimethicone carrier. Compliance Highlights Unavailable
Specsil K-75
Specsil K-75 is a cyclic free blend of high molecular weight Trimethylsiloxysilicate film-former delivered from an Isododecane carrier. Compliance Highlights Unavailable
Specsil K-76
Specsil K-76 Is a high active level of a high molecular weight silicone trimethylsiloxysilicate resin delivered in fast drying volatile silicone carrier fluid for use in skin care, sun care, and color cosmetics. Compliance Highlights Unavailable
Specsil K-78
Specsil K-78 combines a high molecular weight silicone resin and cyclic volatile silicone fluid with a low D4 level. Used in skin care, sun care, color cosmetics and hair care applications. Specsil K-73 forma a long lasting, water resistant film on the skin and hair surface. An excellent choice to obtain water foundations, mascaras, and sunscreen formulations when long lasting wear is desired. Specsil K-78 provides hair volume, body and humidity resistance in hair care formulations.
Specsil K-79
Specsil K-79 is a blend of high molecular weight Trimethylsiloxysilicate film-former delivered from a polydimethylsiloxane carrier. Compliance Highlights Unavailable
Specsil K-79 LV
Specsil K-79 LV is a blend of high molecular weight Trimethylsiloxysilicate film-former delivered from a polydimethylsiloxane carrier. Compliance Highlights Unavailable
Specsil SPD
Specsil SPD is a non-ionic aqueous dispersion of 2 micron, amorphous silicone crosspolymer powder. This dispersion offers ease and flexibility when formulating an elastomeric powder into water based cosmetic products. Specsil SPD provides unique properties in final formulations. Specsil SPD provides “soft focus” effect via its micronized particles. When used alone or in combination with other materials it works to minimize the appearance of facial lines and wrinkles without agglomeration.
Sunsolv™ BOS
Sunsolv™ BOS is an ester of salicylic acid and a branched C-12 alcohol. Its utility can be broadly summarized into 3 categories: solubilizer, photostabilizer and carrier/dispersant. This product offers low viscosity and relatively high polarity. It can be used as a solubilizer for crystalline UV filters, as a photostabilizer for photo-unstable UV filters, and as a carrier and dispersant for TiO2 and ZnO.
Volasil® 7525
Volasil® 7525 is a volatile carrier, compatible with a wide range of cosmetic ingredients. The mixture of cyclic volatile silicones produces a very low surface tension level, providing excellent spreading, easy rub-out, and functional lubrication. Excellent compatibility with most waxes, hydrocarbons, esters, oils, and other silicone products.
VOLASIL® 8515
VOLASIL® 8515 is a mixture of volatile and cyclic silicones. It adds silky softness and shine to hair formulations, improves spreadability, and provides lubricity to hair formulations. This product is suitable for hair care, skin care, and cosmetic applications.
Volasil® 990
Volasil® 990 is an ultra-pure volatile cyclic silicone composed of decamethylcyclopentasiloxane. Volasil® 990 has a low viscosity, is non-polar and insoluble in water yet miscible in lower alcohols and other solvents typically used in Personal Care formulations. Volasil® 990 has a low heat of vaporization and provides lubricity as well as detackification.
Volasil® 995
Volasil® 995 is a volatile cyclic silicone composed of decamethylcyclopentasiloxane. Volasil® 995 has a low viscosity, is non-polar and insoluble in water yet miscible in lower alcohols and other solvents typically used in Personal Care formulations. Volasil® 995 has a low heat of vaporization and provides lubricity as well as detackification.
VOLASIL® 996
VOLASIL® 996 is a volatile, low viscosity silicone fluid comprised mainly of cyclohexasiloxane. It is clear, odorless and non greasy. This product can be used as a base fluid in a number of personal care products, while providing excellent spreading and lubrication properties.
Volasil® DM-0.65
Volasil® DM-0.65 is a low viscosity, linear silicone fluid with high volatility. Volasil® DM-0.65 is used in many personal care and cosmetic applications to increase the spreadability and volatility of a formulation. Compliance Highlights Unavailable
VOLASIL® DM-1
VOLASIL® DM-1 silicone fluid is a low viscosity, highly volatile, linear fluid that can be used in many personal care and cosmetic applications including: hair care, skin care, body care, intimate care,and color cosmetics. It has a viscosity of 1.0 cs. VOLASIL® DM fluid provides excellent spreading and volatility characteristics to personal care formulations.
VOLASIL® DM-1.5
VOLASIL® DM-1/.5 silicone fluid is a low viscosity, highly volatile, linear fluid that can be used in many personal care and cosmetic applications including: hair care, skin care, body care, intimate care,and color cosmetics. It has a viscosity of 1.5 cs. VOLASIL® DM fluid provides excellent spreading and volatility characteristics to personal care formulations.
VOLASIL® DM-2
VOLASIL® DM-2 silicone fluid is a low viscosity, highly volatile, linear fluid that can be used in many personal care and cosmetic applications including: hair care, skin care, body care, intimate care,and color cosmetics. It has a viscosity of 2.0 cs. VOLASIL® DM fluid provides excellent spreading and volatility characteristics to personal care formulations.
XO-THERM®-SP
XO-THERM®-SP is a medium viscosity, self-warming liquid lubricant that instantly warms upon contact with moisture. XO-THERM®-SP was specially formulated for use in shaving applications where a warming sensation and emolliency are desired. Compliance Highlights Unavailable
Condicare CT
Condicare CT is a cationic quaternary ammonium ethosulfate, compatible with most commonly used anionics. Originally designed as a no build-up, low irritation cationic hair conditioner, Condicare CT has emerged as a truly unique product for the rapidly changing hair and skin care markets. Applications and toxicological studies have shown Condicare CT to offer a combination of conditioning and low irritation properties desirable in modern formulation development.
Condicare PQ-7
Condicare PQ-7 is a highly charged cationic co-polymer that provides clarity and compatibility to anionic systems. This co-polymer is highly water soluble and is ideal for use in hair and skin care applications. Compliance Highlights Available
Condicare PQ-7 PF
Condicare PQ-7 PF, in this version, is paraben-free. It is a highly charged cationic co-polymer that provides clarity and compatibility to anionic systems. This co-polymer is highly water soluble and is ideal for use in hair and skin care applications. Compliance Highlights Available
Condicare PQ10-4
Condicare PQ10-4 is a cationic conditioning agent used in personal care applications. It is mild and compatible with anionic, nonionic, cationic and amphoteric systems. Condicare PQ10-4 also is completely soluble in water, which allows it to be used in clear systems.
Cosmetic Fluid 0515-OH
Cosmetic Fluid 0515-OH is a blend of an ultra-high viscosity Dimethiconol in a low viscosity dimethicone fluid that provides a smooth, non-tacky skin feel. Suitable for use in skincare and sun protection applications. Compliance Highlights Unavailable
COSMETIC FLUID 1406-DM
COSMETIC FLUID 1406-DM contains a high molecular weight dimethicone elastomer with a low viscosity dimethicone fluid. It is an excellent emollient with skin protecting properties and offers water resistance to skin lotions and creams. This product is a cyclic free compound.
Cosmetic Fluid 1406-OH
Cosmetic Fluid 1406-OH is a product comprising of a dimethicone fluid and a high molecular weight silicone polymer. Cosmetic Fluid 1406-OH provides a lubricious skin feel. It can be combined with commonly used esters, natural oils, hydrocarbons, or other silicones for a variety of personal care applications. Typical use level 35 – 65%.
Cosmetic Fluid 1481-DM
Cosmetic Fluid 1481-DM is a cyclic free silicone elastomer blend version of Cosmetic Fluid 1486- DM. Suitable for the development of D4 and/or D5 free treatment serums, shine products and hair styling aids. Compliance Highlights Unavailable
COSMETIC FLUID 1486-DM
COSMETIC FLUID 1486-DM is a blend of high molecular Dimethicone Gum with Cyclomethicone. It is a high solid, high viscosity version which is excellent for hair care. This product adds silky softness to hair, improves water repellency, improves spreadability, provides lubricity, and adds shine to hair products.
Cosmetic Fluid 1486-DM CF
Cosmetic Fluid 1486-DM CF is a cyclic free silicone elastomer blend version of Cosmetic Fluid 1585- OH. Suitable for the development of D4 and/or D5 free treatment serums, shine products and hair styling aids. Compliance Highlights Unavailable
COSMETIC FLUID 1486-NH
COSMETIC FLUID 1486-NH contains a high molecular weight cationic elastomer with Cyclopentasiloxane, D5. It adds silky softness to hair, improves water repellency, improves spreadability, provides lubricity, and adds shine to hair products. This product is suitable for hair care, skin care, and cosmetic applictions.
Cosmetic Fluid 1486-OH
Cosmetic Fluid 1486-OH is a product consisting of cyclopentasiloxane, cyclotetrasiloxane and a high molecular weight dimethicone elastomer. This was blended for optimum volatility and shine. Excellent choice and widely used for hair serums. Typical use level 15 – 35%.
Cosmetic Fluid 1580-OH
Cosmetic Fluid 1580-OH is a cyclic free silicone elastomer blend version of Cosmetic Fluid 1585-OH. Suitable for the development of D4 and/or D5 free treatment serums, hair styling aids and shine products. Compliance Highlights Unavailable
COSMETIC FLUID 1585-ID
COSMETIC FLUID 1585-ID is a compound of a high molecular Dimethicone Elastomer with an Isododecane carrier. It adds silky softness to hair, improves water repellency and spreadability, provides lubricity, and adds shine to hair products. This product has excellent compatibility with organic solvents and has a high refractive index.
COSMETIC FLUID 1585-OH
COSMETIC FLUID 1585-OH contains a high molecular weight dimethicone elastomer with Cyclopentasiloxane. It adds silky softness to hair, improves water repellency, improves spreadability and provides lubricity, and adds shine to hair products. This product is recommended for use in hair care, skin care, and cosmetic products.
Cosmetic Fluid 1585-OH-ND
Cosmetic Fluid 1585-OH-ND is a product comprising of a cyclopentasiloxane carrier fluid, a high molecular weight dimethiconol polymer and dimethicone. Widely used in the development of hair serums, hair shine products, and hair conditioner formulations. Typical use level 45-65% w/w for hair care and 1-15% w/w for skin care and cosmetic applications.
COSMETIC FLUID 2006-OH
COSMETIC FLUID 2006-OH is a clear solution containing an ultra-high viscosity hydroxy-terminated silicone elastomer (dimethiconol) dispersed in a low viscosity, non-volatile dimethicone silicone fluid. It is formulation to improve the substantivity and the aesthetic of emollients, gels, ointments and stinks.
COSMETIC FLUID 3569-DM
COSMETIC FLUID 3569-DM contains a high molecular weight dimethicone elastomer with a low viscosity dimethicone fluid in a cyclopentasiloxane base. It has a high solids level, adds silky softness to formulations, and provides excellent lubricity without tackiness. This product is recommended for hair care and skin care applications.
COSMETIC FLUID 4306-DM
COSMETIC FLUID 4306-DM is a combination of volatile cyclic silicone, high molecular weight dimethicone elastomer and a very pure grade of linear dimethicone. This is a medium viscosity silicone formula that adds softness and spreadability to hair care and skin care products.
COSMETIC FLUID 6570-DM
COSMETIC FLUID 6570-DM contains a high molecular weight elastomer in a blend of volatile and cyclic siloxanes. It has high volatility, provides water-resistant film, is compatible with other silicones, and is an excellent base fluid for active raw materials. This product is suitable for cosmetics, skin care, and skin treatment products.
COSMETIC FLUID 6590-DM
COSMETIC FLUID 6590-DM contains a high molecular weight dimethicone elastomer in a combination of volatile linear siloxanes. It can serve as an excellent delivery system for various skin care applications that incorporate active ingredients and cosmeceuticals. COSMETIC FLUID 6590-DM leaves the skin feeling silky smooth and non-oily. This product will leave a matte finish and maintains excellent playtime.
COSMETIC FLUID 7007-DM
COSMETIC FLUID 7007-DM is a specially compounded silicone elastomer gel which provides luxurious long-lasting skin feel and a matte finish from a D5 free delivery system. It contains a volatile low viscosity dimethicone that provides excellent spreadability with rapid volatility to leave behind a nice dry finish. The unique loosely crosslinked dimethicone cross polymer provides excellent playtime, cushion, and feel. COSMETIC FLUID 7007-DM can be used for a wide range of skin care applications.
COSMETIC FLUID 8100-OH
COSMETIC FLUID 8100-OH contains a high molecular weight dimethiconol elastomer in a combination of highly volatile linear siloxanes. Cosmetic Fluid 8100-OH can serve as an excellent delivery system for carious skin care applications that incorporate active ingredients and cosmeceuticals. Cosmetic Fluid 8100-OH leaves the skin feeling silky smooth and not oily. This product will leave a matte finish and maintains excellent playtime.
COSMETIC FLUID 8108-OH
COSMETIC FLUID 8108-OH contains a high molecular weight dimethiconol elastomer in a combination of highly volatile linear siloxanes. It can serve as an excellent delivery system for various skin care applications that incorporate active ingredients and cosmeceuticals. COSMETIC FLUID 8108-OH leaves the skin feeling silky smooth and not oily. This product will leave a matte finish and maintains excellent playtime.
COSMETIC FLUID 8503-HALS
COSMETIC FLUID 8503-HALS is a unique cationic moisture-activated silicone hair rejuvenator and shine treatment. This dual action compound is specially formulated utilizing hindered amine light stabilizing silicone technology with high viscosity silicone elastomers in a volatile base. The HALS silicone when reacted with water deposits a substantive protective coating providing conditioning, anti-frizz and softness to the hair shaft which provide protection and shine from exposure to daily environmental stress, humidity, heat and UV damage.
COSMETIC FLUID 9502-DM
COSMETIC FLUID 9502-DM is a specially compounded silicone elastomer gel which provides luxurious long lasting skin feel and a matte finish from a volatile delivery system. It contains a volatile silicone fluid to provide excellent spreadability with rapid volatility to leave behind a non-tacky, dry-finish. A unique loosely crosslinked dimethicone cross polymer provides excellent, long-lasting lubricity, cushion, and feel, COSMETIC FLUID 9502-DM can be used for a wide range of skin care applications.
DIMETHISIL® 12,500
DIMETHISIL® 12,500 silicone from is a medium-to-high viscosity dimethicone or polydimethiylsiloxane polymer that is a common ingredient in many personal care and cosmetic applications. It offers skin protection, impart soft velvety skin feel, and improves spreadability. This product has a viscosity of 12,000 cs.
DIMETHISIL® 30,000
DIMETHISIL® 30,000 silicone from is a medium-to-high viscosity dimethicone or polydimethiylsiloxane polymer that is a common ingredient in many personal care and cosmetic applications. It offers skin protection, impart soft velvety skin feel, and improves spreadability. This product has a viscosity of 30,000 cs.
DIMETHISIL® DM-10
DIMETHISIL® DM-10 silicone fluid is a low-viscosity dimethicone that can be used in many personal care and cosmetic applications, including hair care, skin care, body care, intimate care, and color cosmetics. It provides excellent spreading and volatility to personal care formulations. This product has a viscosity of 10cs.
DIMETHISIL® DM-100
DIMETHISIL® DM-100 fluid is a medium viscosity Dimethyl Polysiloxane used used in a variety of Personal Care and Industrial applications. It adds silky softness to hair formulations, improves spreadability and provides lubricity in lotions, is non-sticky, long-lasting, and improves water repellency. This product is recommended for hair care, skin care, and cosmetic products. DIMETHISIL® DM-100 has a viscosity of 100 at 25ºC.
DIMETHISIL® DM-1000
DIMETHISIL® DM-1000 fluid is a medium viscosity Dimethyl Polysiloxane used used in a variety of Personal Care and Industrial applications. It adds silky softness to hair formulations, improves spreadability and provides lubricity in lotions, is non-sticky, long-lasting, and improves water repellency. This product is recommended for hair care, skin care, and cosmetic products. DIMETHISIL® DM-1000 has a viscosity of 1000 at 25ºC.
DIMETHISIL® DM-10,000
DIMETHISIL® DM-10,000 fluid is a medium viscosity Dimethyl Polysiloxane used used in a variety of Personal Care and Industrial applications. It adds silky softness to hair formulations, improves spreadability and provides lubricity in lotions, is non-sticky, long-lasting, and improves water repellency. This product is recommended for hair care, skin care, and cosmetic products. DIMETHISIL® DM-10,000 has a viscosity of 10,000 at 25ºC.
Dimethisil® DM-12,500
Dimethisil® DM-12,500 silicone fluid is a medium viscosity dimethicone that is used in many personal care and cosmetic applications including: hair care, skin care, body care, and color cosmetics. Dimethisil® DM-12,500 provides excellent spreading and lubricity to personal care formulations.
DIMETHISIL® DM-20
DIMETHISIL® DM-20 silicone fluid is a low-viscosity dimethicone that can be used in many personal care and cosmetic applications, including hair care, skin care, body care, intimate care, and color cosmetics. It provides excellent spreading and volatility to personal care formulations. This product has a viscosity of 20cs.
DIMETHISIL® DM-200
DIMETHISIL® DM-200 fluid is a medium viscosity Dimethyl Polysiloxane used used in a variety of Personal Care and Industrial applications. It adds silky softness to hair formulations, improves spreadability and provides lubricity in lotions, is non-sticky, long-lasting, and improves water repellency. This product is recommended for hair care, skin care, and cosmetic products. DIMETHISIL® DM-200 has a viscosity of 200 at 25ºC.
DIMETHISIL® DM-3000
DIMETHISIL® DM-3000 fluid is a medium viscosity Dimethyl Polysiloxane used used in a variety of Personal Care and Industrial applications. It adds silky softness to hair formulations, improves spreadability and provides lubricity in lotions, is non-sticky, long-lasting, and improves water repellency. This product is recommended for hair care, skin care, and cosmetic products. DIMETHISIL® DM-3000 has a viscosity of 3000 at 25ºC.
DIMETHISIL® DM-350
DIMETHISIL® DM-350 fluid is a medium viscosity Dimethyl Polysiloxane used used in a variety of Personal Care and Industrial applications. It adds silky softness to hair formulations, improves spreadability and provides lubricity in lotions, is non-sticky, long-lasting, and improves water repellency. This product is recommended for hair care, skin care, and cosmetic products. DIMETHISIL® DM-350 has a viscosity of 350 at 25ºC.
DIMETHISIL® DM-5
DIMETHISIL® DM-5 silicone fluid is a low-viscosity dimethicone that can be used in many personal care and cosmetic applications, including hair care, skin care, body care, intimate care, and color cosmetics. It provides excellent spreading and volatility to personal care formulations. This product has a viscosity of 5cs.
DIMETHISIL® DM-50
DIMETHISIL® DM-50 fluid is a medium viscosity Dimethyl Polysiloxane used used in a variety of Personal Care and Industrial applications. It adds silky softness to hair formulations, improves spreadability and provides lubricity in lotions, is non-sticky, long-lasting, and improves water repellency. This product is recommended for hair care, skin care, and cosmetic products. DIMETHISIL® DM-50 has a viscosity of 50 at 25ºC.
DIMETHISIL® DM-500
DIMETHISIL® DM-500 fluid is a medium viscosity Dimethyl Polysiloxane used used in a variety of Personal Care and Industrial applications. It adds silky softness to hair formulations, improves spreadability and provides lubricity in lotions, is non-sticky, long-lasting, and improves water repellency. This product is recommended for hair care, skin care, and cosmetic products. DIMETHISIL® DM-500 has a viscosity of 500 at 25ºC.
DIMETHISIL® DM-5000
DIMETHISIL® DM-5000 fluid is a medium viscosity Dimethyl Polysiloxane used used in a variety of Personal Care and Industrial applications. It adds silky softness to hair formulations, improves spreadability and provides lubricity in lotions, is non-sticky, long-lasting, and improves water repellency. This product is recommended for hair care, skin care, and cosmetic products. DIMETHISIL® DM-5000 has a viscosity of 5000 at 25ºC.
Dimethisil® DM-6
Dimethisil® DM-6 silicone fluid is a low viscosity dimethicone that is used in many personal care and cosmetic applications including: hair care, skin care, body care, intimate care, and color cosmetics. Dimethisil® DM-5 provides excellent spreading and volatility to personal care formulations.
DIMETHISIL® DM-6000
DIMETHISIL® DM-6000 fluid is a medium viscosity Dimethyl Polysiloxane used used in a variety of Personal Care and Industrial applications. It adds silky softness to hair formulations, improves spreadability and provides lubricity in lotions, is non-sticky, long-lasting, and improves water repellency. This product is recommended for hair care, skin care, and cosmetic products. DIMETHISIL® DM-6000 has a viscosity of 6000 at 25ºC.
Dimethisil® DM-60,000
Dimethisil® DM-60,000 silicone fluid is a high viscosity dimethicone that is used in many personal care and cosmetic applications including: hair care, skin care, body care, and color cosmetics. Compliance Highlights Unavailable
Dimethisil® HNH-HV
Dimethisil® HNH-HV is a high viscosity functionalized dimethyl fluid containing a high, hindered amine content. The introduction of amine functionality into a dimethyl silicone creates a cationic, substantive raw material. This modification enhances the molecules’ ability to form ionic bonds with keratinaceous substrates. Provides excellent hair wet and dry combability at low use levels and provides excellent frizz control at high use levels. The hindered amine moiety has free radical scavenging properties which prevents yellowing. his unique raw material has an excellent toxicity profile.
Dimethisil® HNH-LV
Dimethisil® HNH-LV is a low viscosity functionalized dimethyl fluid made using hindered amine and contains the highest amine content of the HNH product family. The introduction of amine functionality into a dimethyl silicone creates a cationic, substantive raw material. This modification enhances the molecules’ ability to form ionic bonds with keratinaceous substrates. Readily incorporated into clear surfactant cleansing systems without the need for elaborate emulsification or stabilization systems. This unique raw material has an excellent toxicity profile.
Dimethisil® HNH-MV
Dimethisil® HNH-MV is a high viscosity functionalized dimethyl fluid containing a high hindered amine content. The introduction of amine functionality into a dimethyl silicone creates a cationic, substantive raw material. This modification enhances the molecules’ ability to form ionic bonds with keratinaceous substrates. Provides excellent hair wet and dry combability at low use levels and provides excellent frizz control at high use levels. This unique raw material has an excellent toxicity profile.
Dispersun DSP-OL100
Dispersun DSP-OL100 is a highly effective natural dispersant for ultrafine titanium dioxide and zinc oxide. It can significantly increase the UV absorption of sunscreens containing pigments, in addition to reducing whitening when applied to the skin. It dramatically decreases the viscosity of dispersions at dose rates of just a few percent, allowing higher concentrations of pigment to be used, and significantly improves optical transparency and UV absorption, which enables cost savings to be made due to using lower pigment levels.
Dispersun DSP-OL300
Dispersun DSP-OL300 is a natural dispersant for non-aqueous, oil-based systems. It is highly effective for inorganic pigments and titanium dioxide in color cosmetics. It dramatically decreases the viscosity of dispersions at dose rates of just a few percent, allowing higher concentrations of pigment to be used. This product is suitable for use in oil-based systems such as isododecane, castor oil, and alkyl benzoate.
Dispersun DSP-W90 Aqueous
Dispersun DSP-W90 Aqueous is a dispersant agent for inorganic sunscreens in water. It is specifically designed for dispersing and stabilizing inorganic particle dispersions in water and are particularly suited to this application. It dramatically reduces viscosity, allowing an increase in pigment concentration. Dispersun DSP-W90 could also provide other advantages of improved dispersions such as increased UV absorption and better transparency.
Dispersun DSP-W90 Color Cosmetic
Dispersun DSP-W90 Color Cosmetic is a dispersing agent that is specially designed for dispersing pigments into water-based systems, such as water-based mascaras and foundations. This product dramatically decreases viscosity of dispersions at dose rates of just a few percent, allowing higher concentrations of pigment to be used.
ELTESOL® PSC 40
ELTESOL® PSC 40 is an aqueous solution of a sodium and potassium cumene sulphonate. It is formulated to give a lower crystallisation temperature Compliance Highlights Unavailable
ELTESOL® SC 40
ELTESOL® SC 40 is an aqueous solution of a sodium cumene sulphonate. This product acts as a hydrotrope and may be used to increase the solubility of other compounds. In conjunction with non-ionic surfactants it will raise the cloud point of the solution allowing clear liquids to be obtained at higher temperatures, enabling additional control of the foaming characteristics and performance. It may also be used to reduce the viscosity of concentrated surfactants and formulations.
ELTESOL® SC 93
ELTESOL ® SC 93 is a sodium cumene sulphonate powder. This product acts as a hydrotrope and may be used to increase the solubility of other compounds. In conjunction with non-ionic surfactants it will raise the cloud point of the solution allowing clear liquids to be obtained at higher temperatures, enabling additional control of the foaming characteristics and performance. It may also be used to reduce the viscosity of concentrated surfactants and formulations.
ELTESOL® SC Pellets
ELTESOL® SC Pellets is sodium cumene sulphonate. This product acts as a hydrotrope and may be used to increase the solubility of other compounds. In conjunction with non-ionic surfactants it will raise the cloud point of the solution allowing clear liquids to be obtained at higher temperatures, enabling additional control of the foaming characteristics and performance. It may also be used to reduce the viscosity of concentrated surfactants and formulations.
ELTESOL® ST 90
ELTESOL® ST 90 is a sodium toluene sulphonate in powder. This product acts as a hydrotrope and may be used to increase the solubility of other compounds. In conjunction with non-ionic surfactants it will raise the cloud point of the solution allowing clear liquids to be obtained at higher temperatures, enabling additional control of the foaming characteristics and performance. It may also be used to reduce the viscosity of concentrated surfactants and formulations.
ELTESOL® ST 93 Pellets
ELTESOL® ST 93 Pellets is sodium toluene sulphonate. This product acts as a hydrotrope and may be used to increase the solubility of other compounds. In conjunction with non-ionic surfactants it will raise the cloud point of the solution allowing clear liquids to be obtained at higher temperatures, enabling additional control of the foaming characteristics and performance. It may also be used to reduce the viscosity of concentrated surfactants and formulations.
ELTESOL® SX 30
ELTESOL® SX 30 is an aqueous solution of sodium xylene sulphonate. It is ideal for use in dishwash liquids and general purpose household cleaners. This product is an example of an hydrotrope, which when dissolved in water will assimilate molecules of other normally insoluble compounds. They, therefore, act as solubilisers, coupling agents and viscosity modifiers in liquid formulations
ELTESOL® SX 33
ELTESOL® SX 33 is an aqueous solution of sodium xylene sulphonate. This product is an example of an hydrotrope, which when dissolved in water will assimilate molecules of other normally insoluble compounds. They, therefore, act as solubilisers, coupling agents and viscosity modifiers in liquid formulations. It is ideal for use in dishwashing liquids, general purpose cleaners, and liquid and powder detergetns.
ELTESOL® SX 40
ELTESOL® ST 40 is an aqueous solution of sodium toluene sulphonate. This product is an example of an hydrotrope, which when dissolved in water will assimilate molecules of other normally insoluble compounds. They, therefore, act as solubilisers, coupling agents and viscosity modifiers in liquid formulations.
ELTESOL® SX 93
ELTESOL ® SX 93 is a sodium xylene sulphonate powder. This product acts as a hydrotrope and may be used to increase the solubility of other compounds. In conjunction with non-ionic surfactants it will raise the cloud point of the solution allowing clear liquids to be obtained at higher temperatures, enabling additional control of the foaming characteristics and performance. It may also be used to reduce the viscosity of concentrated surfactants and formulations.
ELTESOL® SX Pellets
ELTESOL® SX Pellets is sodium xylene sulphonate. This product acts as a hydrotrope and may be used to increase the solubility of other compounds. In conjunction with non-ionic surfactants it will raise the cloud point of the solution allowing clear liquids to be obtained at higher temperatures, enabling additional control of the foaming characteristics and performance. It may also be used to reduce the viscosity of concentrated surfactants and formulations.
EMPICOL® 0045 / B
EMPICOL® 0045 / B is a dried powder of sodium lauryl sulfate. It is a versatile surfactant capable of producing a fine, creamy foam. It is also a good emulsifier and an excellent wetting agent, with good electrolyte tolerance, making it ideal for use as the primary surfactant in a range of cosmetic and detergent applications, such as shaving creams, laundry detergents and additives and toilet blocks.
EMPICOL® 0335 / X
EMPICOL® 0335 / X is a sodium C10-C12 linear alkyl sulphate in aqueous solution. It can be used in Vegetable oil refinement, emulsion polymerisation and all applications where the use of short shain alkyl sulphate is required. Compliance Highlights Unavailable
EMPICOL® 0585 / A
EMPICOL® 0585 / A is an aqueous solution of sodium 2-ethylhexyl sulfate. This product is mainly used as a wetting agent. Compliance Highlights Available
EMPICOL® 0585 / U
EMPICOL ® 0585 / U is an aqueous solution of sodium 2-ethylhexyl sulfate. This product is mainly used as a wetting agent. Compliance Highlights Available
EMPICOL® 0775 / 55
EMPICOL ® 0775 / 55 is a sodium alkyl sulphate based on C12-C18 alcohol. It is recommended for use as a primary surfactant in the manufacture of hand- cleaning pastes at a pH close to that of the skin. It is based on a carefully selected blend of coconut and tallow alcohols.
EMPICOL® AL 25 / EX
EMPICOL® AL 25 / EX is an aqueous solution of ammonium lauryl sulfate. It has excellent foaming characteristics and it can be used to promote the formation of a creamy and luxurious lather in a wide variety of cosmetic products, such as shampoos, bath and shower gels and liquid soaps.
EMPICOL® AL 70
EMPICOL® AL 70 is an aqueous solution of ammonium lauryl sulfate. It has excellent foaming characteristics and it can be used to promote the formation of a creamy and luxurious lather in a wide variety of cosmetic products, such as shampoos, bath and shower gels and liquid soaps.
EMPICOL® CBJ
EMPICOL® CBJ is a concentrated aqueous solution of Laureth-11 Carboxylic Acid with a degree of carboxymethylation of ca. 90%. It is ideal for use in mild personal care products such as shampoos, shower gels, liquid soaps, foam baths and other low irritation formulations.
EMPICOL® CED 5
EMPICOL® CED 5 is a concentrated aqueous solution of Laureth-5 Carboxylic Acid. As well as providing good foam, which is tolerant to water hardness, and emulsification, ether carboxylates exhibit superior mildness to many other surfactants, which makes them ideal in cosmetic formulations, such as shower gels, shampoos and liquid soaps.
EMPICOL® CED 5 / S
EMPICOL® CED 5 / S is an aqueous solution of sodium laureth-5 carboxylate. As well as providing good foam, which is tolerant to water hardness, and emulsification, ether carboxylates exhibit superior mildness to many other surfactants, which makes them ideal in cosmetic formulations, such as shower gels, shampoos and liquid soaps.
EMPICOL® CVE
EMPICOL® CVE is a concentrated aqueous solution of Capryleth-6 Carboxylic Acid. The specific properties of ether carboxylates make them versatile surfactants with applications in many industries. This product is particularly recommended for emulsification and solubilisation and especially where low or controlled foam is an advantage. This makes it ideal for surface cleaning applications in industrial, institutional and home environments. This product is compatible with nonionic and amphoteric surfactants, but may cause hydrolysis of some anionic surfactants, such as alkyl and alkyl ether sulfates, unless neutralised first.
EMPICOL® CZ / N
EMPICOL® CZ / N is a dried powder of sodium coco sulfate. It is ideally suited for use as a foaming and wetting agent in oral care products and as an excipient in pharmaceuticals. It is manufactured specifically to meet the requirements of the monographs for sodium lauryl sulphate in the U.S. Pharmacopoeia (USP40/NF35) and European Pharmacopoeia 9th edition.
EMPICOL® CZV / N
EMPICOL® CZV / N is dried sodium coco sulfate in the form of needles. It is ideally suited for use as a foaming and wetting agent in oral care products and as an excipient in pharmaceuticals. It is manufactured specifically to meet the requirements of the monographs for sodium lauryl sulphate in the U.S. Pharmacopoeia (USP40/NF35) and European Pharmacopoeia 9th edition.
EMPICOL® EAC 70
EMPICOL ® EAC 70 is an aqueous solution of a toiletry grade of ammonium lauryl ethoxy ( 3EO ) sulphate based on a narrow cut primary natural alcohol. This product is a versatile toiletry raw material which combines optimum performance with excellent foaming characteristics. It is used in the formulation of high quality shampoos, foam baths, shower products, liquid soaps, creams and lotions.
EMPICOL® EGC 70
EMPICOL® EGC 70 is an aqueous solution of magnesium laureth sulfate at circa 70% based on a linear C12-14 alcohol. Magnesium laureth sulfates typically provide greater viscosity build and improved foaming characteristics over their sodium and ammonium equivalents. Therefore this product gives an excellent balance of performance with the improved mildness typically associated with higher degrees of ethoxylation.
EMPICOL® IDS X10
EMPICOL® iDS X10 is a blend of low foam surfactants. This product is a concentrated blend of low foam surfactants, specifically designed to give excellent wetting and detergency in conjunction with a low volume of controlled foam. These properties make it ideal for the formulation of a variety of detergents, where excess foam is undesirable, such as hard surface cleaners, floor cleaners and fine fabrics detergents.
EMPICOL® LQ 33 / TX
EMPICOL® LQ 33 / TX is an aqueous solution of toiletry grade of monoethanolamine lauryl sulphate solution based on a narrow cut primary natural alcohol. This product is a versatile toiletry raw material which combines optimum performance with excellent foaming characteristics. It is used in the formulation of high quality shampoos, foam baths, shower products, liquid soaps, creams and lotions, and childrens shampoo and bath products.
EMPICOL® LX / B
EMPICOL® LX / B is a dried powder of sodium lauryl sulfate. It is a versatile surfactant capable of producing a fine, creamy foam. It is also a good emulsifier and an excellent wetting agent, with good electrolyte tolerance, making it ideal for use as the primary surfactant in a range of cosmetic and detergent applications, such as shaving creams, laundry detergents and additives and toilet blocks.
EMPICOL® LX / B / MB
EMPICOL® LX / B / MB is a dried powder of sodium lauryl sulfate. The fatty alcohol from which it is derived is sourced according to the Mass Balance rules set by the RSPO*. It is a versatile surfactant capable of producing a fine, creamy foam. It is also a good emulsifier and an excellent wetting agent, with good electrolyte tolerance, making it ideal for use as the primary surfactant in a range of cosmetic and detergent applications, such as shaving creams, laundry detergents and additives and toilet blocks.
EMPICOL® LX / N
EMPICOL® LX / N is a dried powder of sodium lauryl sulfate. It is ideally suited for use as a foaming and wetting agent in oral care products and as an excipient in pharmaceuticals. It is manufactured specifically to meet the requirements of the monographs for sodium lauryl sulphate in the U.S. Pharmacopoeia (USP40/NF35) and European Pharmacopoeia 9th edition.
EMPICOL® LXV / B
EMPICOL® LXV / B is dried sodium lauryl sulfate in the form of needles. It is a versatile surfactant capable of producing a fine, creamy foam. It is also a good emulsifier and an excellent wetting agent, with good electrolyte tolerance, making it ideal for use as the primary surfactant in a range of cosmetic and detergent applications, such as shaving creams.
EMPICOL® LXV / N
EMPICOL® LXV / N is dried sodium lauryl sulfate in the form of needles. It is ideally suited for use as a foaming and wetting agent in oral care products and as an excipient in pharmaceuticals. It is manufactured specifically to meet the requirements of the monographs for sodium lauryl sulphate in the U.S. Pharmacopoeia (USP40/NF35) and European Pharmacopoeia 9th edition.
EMPICOL® LZ / B
EMPICOL ® LZ / B is a dried powder of sodium lauryl sulfate. It is a versatile surfactant capable of producing a fine, creamy foam. It is also a good emulsifier and an excellent wetting agent, with good electrolyte tolerance, making it ideal for use as the primary surfactant in a range of cosmetic and detergent applications, such as shaving creams, laundry detergents and additives and toilet blocks.
EMPICOL® LZ / N
EMPICOL® LZ / N is a dried powder of sodium lauryl sulfate. It is ideally suited for use as a foaming and wetting agent in oral care products and as an excipient in pharmaceuticals. It is manufactured specifically to meet the requirements of the monographs for sodium lauryl sulphate in the U.S. Pharmacopoeia (USP40/NF35) and European Pharmacopoeia 9th edition.
EMPICOL® LZ / N / MB
EMPICOL® LZ / N / MB is a dried powder of sodium lauryl sulfate. The fatty alcohol from which it is derived is sourced according to the Mass Balance rules set by the RSPO*. It is ideally suited for use as a foaming and wetting agent in oral care products and as an excipient in pharmaceuticals. It is manufactured specifically to meet the requirements of the monographs for sodium lauryl sulphate in the U.S. Pharmacopoeia (USP40/NF35) and European Pharmacopoeia 9th edition.
EMPICOL® LZV / B
EMPICOL ® LZV / B is dried sodium lauryl sulfate in the form of needles. It is a versatile surfactant capable of producing a fine, creamy foam. It is also a good emulsifier and an excellent wetting agent, with good electrolyte tolerance, making it ideal for use as the primary surfactant in a range of cosmetic and detergent applications, such as shaving creams, laundry detergents and additives and toilet blocks.
EMPICOL® LZV / B / MB
EMPICOL® LZV / B / MB is dried sodium lauryl sulfate in the form of needles. The fatty alcohol from which it is derived is sourced according to the Mass Balance rules set by the RSPO*. It is a versatile surfactant capable of producing a fine, creamy foam. It is also a good emulsifier and an excellent wetting agent, with good electrolyte tolerance, making it ideal for use as the primary surfactant in a range of cosmetic and detergent applications, such as shaving creams, laundry detergents and additives and toilet blocks.
EMPICOL® LZV / BE
EMPICOL® LZV / BE is dried sodium lauryl sulfate in the form of needles. This product is a versatile surfactant capable of producing a fine, creamy foam. It is also a good emulsifier and an excellent wetting agent, with good electrolyte tolerance, making it ideal for use as the primary surfactant in a range of cosmetic and detergent applications. The form is particularly useful for powder and tablet products, such as laundry detergents and additives and dishwash tablets, although it may also find application in many other diverse markets.
