Home / Personal Care & Cosmetics / Suppliers / Guangzhou B-Ai Chemical Co., Ltd
Personal Care & Cosmetics
Guangzhou B-Ai Chemical Co., Ltd
Guangzhou B-Ai Chemical Co., Ltd lists 184 grades in Personal Care & Cosmetics. The sheets saved on this site are below.
Grades from Guangzhou B-Ai Chemical Co., Ltd
BI AC50
BI AC50 is a 50% aqueous solution of aluminum chlorohydrate, specially designed for clear gels, emulsions, as well as clear roll-on. It provides superior protection against wetness and odor. Compliance Highlights Available
BI Act- Biotin
BI Act- Biotin is an active raw material formulated with biotin, niacinamide and cyclodextrin. It enhances the solubility of the biotin active ingredient and improves transdermal and trans-scalp absorption. It boosts keratin synthesis to strengthen hair strands and repair hair cuticles, minimizing hair breakage. Meanwhile, it nourishes nails and supports skin barrier repair. Featuring excellent formulation compatibility and good thermal stability, it is widely used in hair care, skin care and hand care products.
BI APG PO65
BI APG PO65 is a nature-based lipid, which helps to reduce the skin moisture loss after cleaning, reshapes the skin lipid layer barrier, and imparts a moisturizing, smooth, and soft skin feeling. In addition, when used with surfactants, it can effectively increase the viscosity of the system and stabilize the foam. It can also offer good conditioning properties to hair, help to repair the damaged epidermal layer of hair, and reduce the phenomenon of hair splitting and drying. It is widely used in soap base products, baby care products, shower gel, facial cleanser, and shampoo.
BI CGP
BI CGP is a green preservative for personal care products that eliminates the need for traditional preservative ingredients. It is very suitable for formulas that claim "no preservatives". It is compounded with multifunctional components that exhibit excellent inhibition of microorganisms, providing a broad-spectrum antibacterial effect and effective inhibition of bacteria, molds, and yeasts. It is very mild, has low irritation, and provides no fever feeling after use.
BI CHA
BI CHA, an ideal bacteriostatic organic acid, has excellent antibacterial and bacteriostatic properties at acidic to neutral pH values, especially for mold. It is a safe, mild, non-irritating green antibacterial agent. It is free of any traditional preservatives, which makes it ideal for formulations that claim to be "preservative-free" and "parabens-free". It can be used in emulsion systems, anhydrous formulas, and surfactant washing systems, such as creams, lotions, shower gels, shampoos, and make-up.
BI CHA 10
BI CHA10 is a safe, mild, non-irritating green preservative. It doesn’t contain any chemical preservatives, and is suitable for formulations that claim to be "preservative-free" and "parabens-free". CHA can inhibit the growth of mold by chelating Fe2+ and Fe3+. Propylene glycol can strongly hydrate, thereby reducing the content of free water and making it difficult for microorganisms to survive. Both of them work together to achieve a broad-spectrum antibacterial effect.
BI CHAP
BI CHAP is a green preservative for personal care products that eliminates the need for chemical preservatives. It is very suitable for formulas that claim "no preservatives". It exhibits excellent inhibition of microorganisms, with a broad-spectrum antibacterial effect, and effectively inhibits bacteria, molds, and yeasts. It is very mild, has low irritation, and provides no fever feeling after use.
BI CHE
BI CHE is a green antibacterial agent for personal care products without any traditional preservative ingredients. It is very suitable for formulas that claim “no preservatives". It is compounded with multifunctional components that exhibit excellent inhibition of microorganisms, providing a broad-spectrum antibacterial effect and effective inhibition of bacteria, molds, and yeasts. It is very mild, has low irritation, and provides no fever feeling after use. It has good stability at low temperatures.
BI CHP
BI CHP is a green antibacterial agent for personal care products without any traditional preservative ingredients. It is very suitable for formulas that claim "no preservatives". It is compounded with multifunctional components with excellent inhibition of microorganisms, with a broad-spectrum antibacterial effect and good inhibition of bacteria, molds, and yeasts. It is very mild, has low irritation, and provides no fever feeling after use.
BI DHA
BI DHA is a safe sunless skin-tanning product that is fermented from glycerol. It reacts with free amino groups of keratin in the corneum of the epidermis to achieve a dyeing effect, which is called the Maillard reaction. It can achieve a tanning effect without sun exposure, protecting the delicate skin from UVs.
BI DHB
BI DHB is a natural keto-sugar that is fermented from the aerobic bacterium Glucanobacter. It reacts with free amino groups of keratin in the corneum of the epidermis to achieve a dyeing effect, which is called the Maillard reaction. It can achieve a tanning effect without sun exposure, protecting the delicate skin from UVs. It helps prevent streaking and drying effects associated with other tanning products, and is fully compatible with DHA.
BI DMDMH
BI DMDMH is an economical, highly efficient preservative with broad-spectrum activity, especially against mycetes, yeast, gram-positive bacteria, and gram-negative bacteria. It’s well compatible with anionic, cationic, and nonionic surfactants, keeping biological activity in the presence of protein and surfactant. It’s sold as a form of liquid, easy to use, widely used in all kinds of formulations.
BI EGDS
BI EGDS is a fatty acid-derived compound. It acts as an opacifying and pearlizing agent. It is particularly recommended for use in shampoos, hair rinses, conditioners, and liquid soaps. Compliance Highlights Available
BI EGDS-N40
BI EGDS-N40 is a ready- to- use pearlescent agent, containing glycol distearate, glycerin, laureth-4, cocamidopropyl betaine and citric acid. It makes shampoo shining and presenting beautiful gloss. It is easy to use in shampoo, hand soap and shower gel, added at the end of preparation.
BI EGDS-P30
BI EGDS-P30 is a ready- to- use pearlescent agent, containing glycol distearate, sodium laureth sulfate and cocamide MEA. It makes shampoo shining and presenting beautiful gloss. It is easy to use in shampoo, hand soap and shower gel, added at the end of preparation.
BI EGDS-P40
BI EGDS-P40 is a ready-to-use pearlescent agent, containing glycol distearate, sodium laureth sulfate, and cocamide MEA. It makes shampoo shine and present a beautiful gloss. It is easy to use in shampoo, hand soap, and shower gel, added at the end of preparation.
BI EGDS-PM40
BI EGDS-PM40 is a ready- to- use pearlescent agent, containing glycol distearate, sodium laureth sulfate, cocamide methyl MEA and citric acid. It makes shampoo shining and presenting beautiful gloss. It is easy to use in shampoo, hand soap and shower gel, added at the end of preparation.
BI EGDS-PS30
BI EGDS-PS30 is a ready- to- use pearlescent agent, containing glycol distearate, sodium laureth sulfate and cocamide DEA. It makes shampoo shining and presenting beautiful gloss. It is easy to use in shampoo, hand soap and shower gel, added at the end of preparation.
BI EGDS-PS35
BI EGDS-PS35 is a ready- to- use pearlescent agent, containing glycol distearate, lauramidopropyl betaine and C10-16 alkyl glucoside. It makes shampoo shining and presenting beautiful gloss. It is easy to use in shampoo, hand soap and shower gel, added at the end of preparation.
BI EGDS-PS40N
BI EGDS-PS40N is a ready- to- use pearlescent agent, containing glycol distearate, sodium laureth sulfate and cocamide MEA. It makes shampoo shining and presenting beautiful gloss. It is easy to use in shampoo, hand soap and shower gel, added at the end of preparation.
BI EGDS-PS45N
BI EGDS-PS45 is a ready- to- use pearlescent agent, containing glycol distearate,sodium laureth sulfate, Cocamide MEA and Laureth-10. It makes shampoo shining and presenting beautiful gloss. It is easy to use in shampoo, hand soap and shower gel, added at the end of preparation.
BI HCH
BI HCH is a green antibacterial agent for personal care products, suitable for formulas that claim "no preservatives". It is compounded with multifunctional components that exhibit excellent inhibition of microorganisms, providing a broad-spectrum antibacterial effect and effective inhibition of bacteria, molds, and yeasts. It is very mild, with low irritation, and no fever feeling after use. It shows good compatibility with most raw materials and good stability at low temperatures.
BI HDI powder
BI HDI powder is a water-soluble cationic substance with broad-spectrum antibacterial and bactericidal properties. It exhibits high efficacy against various Gram-positive and Gram-negative bacteria, as well as molds and yeasts, while remaining exceptionally mild. It also shows excellent inhibiting effect on Pityrosporum ovale fungi that cause dandruff. It is widely used in cosmetics and other industries.
BI Hydro-ANT
BI Hydro-ANT is a non-toxic, odorless, anti-irritating and nonallergenic crystalline powder which can be soluble in hot water, hot alcohol and dilute sodium hydroxide solution, slightly soluble in water and alcohol, and almost insoluble in organic solvents such as ether and chloroform. The saturated solution is of a weak acid.
BI Hydro-BT99
BI Hydro-BT99 is a highly purified anhydrous betaine with a long-term skin moisturizing effect by strengthening the skin barrier and managing water balance. It has good affinity with keratin and provides hair with excellent conditioning ability, including hair strengthening and frizz control. It is widely used in skin care products, oral care products, shampoo, body wash, and other cleaning products.
BI Hydro-GLY
BI Hydro-GLY is a multi- functional ingredient serving as moisturizer, lubricant and sweetener in food, pharmaceutical and personal care products. It also serves as antifreeze and chemical intermediate in industrial applications. Compliance Highlights Available
BI Hydro-SHA (1.7M Da)
BI Hydro-SHA (1.7M Da) is a high-efficiency moisturizing natural polysaccharide, sodium hyaluronate with excellent water solubility. As a high-molecular-weight HA, it stays on the skin surface and forms a breathable protective film to lock in moisture and reduce water loss. It relieves dry and rough skin, softens skin texture, helps repair the skin barrier, smooths fine dry lines, and improves skin gloss and elasticity.
BI Hydro-SPCA
BI Hydro-SPCA is a natural humectant derived from L-glutamic acid. Known to be abundant in human skin as a component of NMF (natural moisturizing factor), it helps keep skin and hair rich in luster, humidity, softness, and elasticity. Combining with hyaluronic acid results in an excellent synergistic effect, leading to a better skin feel. BI Hydro-SPCA can be used in various cosmetic products, including toner, cream, lotion, foundation, shampoo, facial cleanser, soap, and toothpaste.
BI Hydro-VitB5 75
BI Hydro-VitB5 75 is the alcohol analog of pantothenic acid (vitamin B5), and is thus a provitamin of B5. It is used as a moisturizer and anti-inflammatory agent with healing, thickening, and penetrating properties, offering luster, sheen, and hydration. Compliance Highlights Available
BI Hydro-VitB5 98
BI Hydro-VitB5 98 is the alcohol analog of pantothenic acid (vitamin B5), and is thus a provitamin of B5. It is used as a moisturizer and anti-inflammatory agent with healing, thickening, and penetrating properties, offering luster, sheen, and hydration. Compliance Highlights Available
BI Hydro-ZPCA
BI Hydro-ZPCA acts as a sebum regulator. It not only possesses the moisturizing property of PCA but also has the sebum-regulating ability of zinc. It helps regulate skin sebum secretion and prevent acne. It is widely used in toner, cream, lotion, foundation, shampoo, shower gel, hair conditioner, sun care etc.
BI Menthol
BI Menthol is derived from a mint source and is used as a denaturant, flavoring agent, and fragrance ingredient. This product is ideal for a wide range of personal care and cosmetic products, but is typically used in oral hygiene products because of its cool, fresh mint flavor.
BI OCT
BI OCT is an anti-dandruff active ingredient that soothes an inflamed scalp and reduces flaking. It has a specific action against Pityrosporum ovale, which is the agent responsible for the production of dandruff. The anti-dandruff products containing BI OCT can inhibit the formation of new dandruff and keep the scalp clean.
BI OP301
BI OP301 is a water-based styrene/acrylic emulsion to impart a milky and lotion appearance to liquid products, such as laundry liquid, shampoo, bath and shower lotion, and liquid hand soaps. It enhances the brightness and whiteness of the products, resulting in a visually appealing effect.
BI PCG
BI PCG is a liquid preservative blend of phenoxyethanol and caprylyl glycol. Featuring an optimal C8 carbon chain, caprylyl glycol disrupts microbial cell membranes and synergistically enhances the antimicrobial efficacy of phenoxyethanol. It also provides moisturizing properties and reduces irritation associated with phenoxyethanol. It is widely used in skin care, color cosmetics and sunscreen.
BI PCH
BI PCH is a liquid preservative composed of phenoxyethanol, chlorphenesin and 1,2-Hexanediol. Phenoxyethanol has good antiseptic effect on bacteria, but it has poor antiseptic effect on fungi. Chlorphenesin can effectively inhibit fungi. The combination of phenoxyethanol and chlorphenesin can achieve a broad-spectrum antibacterial effect. 1,2-Hexanediol can enhance the anti-bacterial effect and reduce the irritation of phenoxyethanol and chlorphenesin, and has the moisturizing effect.
BI PEG
BI PEG is a liquid preservative composed of phenoxyethanol and ethylhexylglycerin. Ethylhexylglycerin can improve the antiseptic ability of phenoxyethanol by affecting the surface tension of the microbial cell membrane. It has a broad-spectrum inhibitory effect on bacteria, mold, and yeast, and has certain bactericidal ability. It is very stable, not easy to hydrolyze, and has a good tolerance to temperature and pH value. It has good solubility and can also be well dispersed in various systems at low temperatures. It is widely used in cream, lotion, shampoo, shower gel, and wipes.
BI PGL
BI PGL is a non-ionic surfactant with good thickening effect on amino acid surfactant system and AES system. Meanwhile, it can improve the foam texture, making the foam creamy and dense. It also has excellent cleaning ability and make-up removal ability, making it suitable for oil-based make-up removers. As an ester, it can reduce the dryness of the end products and improve the moisturizing effect on the skin and hair. It is widely used in BB cream, lipstick, make-up remover, facial cleanser, cream, lotion, shampoo, and shower gel.
BI Phenoxyethanol
BI Phenoxyethanol is an organic compound, synthesized by the etherification of ethylene glycol and phenol. It is a colorless or slightly yellowish, transparent, oily liquid that is soluble in water and polar organic solvents, such as ethanol, 1-propanol, 1,2-propanediol, 50% glutaraldehyde, and Protectol PP. With this property, it can be used to dissolve various raw materials and active ingredients such as 2,4-dichlorobenzyl alcohol, methylparaben, 1,2–dibromo–2,4–dicyanobutane (DBDCB), and Iodopropynyl butylcarbamate (salt) (IPBC).
BI PVP K30
BI PVP K30 is soluble in water and many organic solvents, and it forms a hard, transparent, glossy film. It is compatible with most inorganic salts and many resins. BI PVP K30 stabilizes emulsions, dispersions, and suspensions. It is used as a film former in hair styling products, an emulsion stabilizer in creams and lotions, and as a dispersant for hair colorants. It is also a foam stabilizer and gelling agent in toothpastes.
BI PVP K30L
BI PVP K30L is soluble in water and many organic solvents, and it forms a hard, transparent, glossy film. It is compatible with most inorganic salts and many resins. It stabilizes emulsions, dispersions, and suspensions. It is used as a film former in hair styling products, an emulsion stabilizer in creams and lotions, and as a dispersant for hair colorants. It is also a foam stabilizer and gelling agent in toothpastes.
BI PVP K90L
BI PVP K90L is soluble in water and many organic solvents, and it forms a hard, transparent, glossy film. It is compatible with most inorganic salts and many resins. It stabilizes emulsions, dispersions, and suspensions. It is used as a film former in hair styling products, an emulsion stabilizer in creams and lotions, and as a dispersant for hair colorants. It is also a foam stabilizer and gelling agent in toothpastes.
BI PVP K90(P)
BI PVP K90(P) is a nonionic polymer that offers excellent dispersibility and film-forming in cosmetics. Safe and non-irritating, it acts as a setting agent in hair sprays, mousses, and conditioners. Enhances moisture and lubrication in sunscreens and depilatories, providing protective colloid stability in emulsions. Recommended usage: 1-3%.
BI PVP/VA 64W
BI PVP/VA 64W is a copolymer of vinyl acetate and vinylpyrrolidone monomers in water. It is designed for styling resins of mousses, gels, and other hair care products. It has good compatibility with many modifiers, plasticizers, spray propellants, and other cosmetic ingredients. It possesses excellent adhesiveness, flexibility, forms a hard film, and has other characteristics. It is widely used in styling sprays/gels/mousses.
BI PVP/VA 73W
BI PVP/VA 73W is a copolymer of vinyl acetate and vinylpyrrolidone monomers in water. It is designed for styling resins of mousses, gels, and other hair care products. It has good compatibility with many modifiers, plasticizers, spray propellants, and other cosmetic ingredients. It possesses excellent adhesiveness, flexibility, forms a hard film, and has other characteristics. It is widely used in styling sprays/gels/mousses.
BI TD256-ST
BI TD256-ST is a titanium dioxide coated with aluminum hydroxide and triethoxycaprylsilane, providing good whiteness, excellent hydrophobicity, good oil dispersibility, and excellent affinity to the skin. It is widely used in color cosmetics, sun care, and skin care products.
BI THK AVP
BI THK AVP is a water-soluble anionic copolymer with excellent thickening ability. It is pre-neutralized, easy to use, and provides formulations with excellent yield value, corresponding to superior stability even in the absence of additional emulsifier. Meanwhile, it can impart a fresh, smooth, non-greasy feeling to skin. It is widely used in skin care products, sunscreen, and color cosmetics.
BI THK DCP
BI THK DCP, a blend of hydrogenated castor oil and surfactants, boasts excellent thickening, suspending and stabilizing properties. It can suspend silicones, grease, mica, scrub particles, pearlescent agents and anti-dandruff agents, without reducing the foam volume of the final product. It’s easy-to-use and can be added at low temperatures and requires no neutralization. When applied in shampoos, it does not compromise hair smoothness during rinsing. It is widely used in shampoo, shower gel and facial cleanser.
BI THK DCP-Pro
BI THK DCP-Pro, a blend of hydrogenated castor oil and surfactants, boasts excellent thickening, suspending and stabilizing properties. It can suspend silicones, grease, mica, scrub particles, pearlescent agents and anti-dandruff agents, without reducing the foam volume of the final product. It’s easy-to-use and can be added at low temperatures and requires no neutralization. When applied in shampoos, it does not compromise hair smoothness during rinsing. It is widely used in shampoo, shower gel and facial cleanser.
BI THK T120
BI THK T120 is a natural non-ionic rheology modifier derivative from corn. It can be used in various surfactant systems because of its excellent thickening ability. It is very mild and non-irritating to the eyes, making it ideal for baby shampoos. It is widely used in shampoo, shower gel, facial cleanser, hand wash, and baby care products.
BI THK TBN
BI THK TBN is an excellent oil-phase thickener that can effectively stabilize the system. It has good compatibility and a high molecular weight. It is widely used in lip gloss, lipstick, eye shadow, cream, sunscreen, antiperspirant, and hair styling cream.
BI THK THS
BI THK THS is a modified hydrogenated castor oil with excellent thickening ability. It shows good thickening ability in mineral oil, vegetable oil, and silicone oil, as well as low-polarity solvents, which helps improve product stability. It can also be used as a binder in pressed powder formulations and a stiffening agent in stick and ointment formulations. It is widely used in various cosmetics, including lipstick, eyeliner, liquid foundation, mascara, cream, lotion, and sunscreen.
BI THK TS120
BI THK TS120 is an extremely efficient thickener with a moisturizing effect, particularly notable for its significant thickening effect in amino acid surfactant product systems. It is a product with high safety and low irritants. Compliance Highlights Unavailable
BI THK120
BI THK120 is a natural non-ionic rheology modifier derivative from corn. It can be used in various surfactant systems because of its excellent thickening ability. It is very mild and non-irritating to the eyes, making it ideal for baby shampoos. It is widely used in shampoo, shower gel, facial cleanser, hand wash, and baby care products.
BI THK120FL
BI THK120FL is a non-ionic rheology modifier, naturally-derived from corn-based glucose. It is a liquid form, making it easy to use. It can be used in various surfactant system because of its excellent thickening ability. It is very mild and non-irritating to the eyes, making it ideal for baby shampoos. It is widely used in shampoo, shower gel, facial cleanser, hand wash and baby care products.
BI THK120L
BI THK120L is a natural non-ionic rheology modifier derivative from corn. It is a liquid form, making it easy to use. It can be used in various surfactant system because of its excellent thickening ability. It is very mild and non-irritating to the eyes, making it ideal for baby shampoos. It is widely used in shampoo, shower gel, facial cleanser, hand wash and baby care products.
BI THK150
BI THK150 is a highly efficient thickener and rheology modifier in surfactant systems, including non-sulfate and sulfate systems. It can replace amides, thereby increasing foam stability and viscosity. It is widely used in shampoo, shower gel, and facial cleanser.
BI THK150PTS
BI THK150PTS is a highly efficient, cost-effective thickener for surfactant-based systems. It can effectively replace CDEA and CMEA, thereby increasing foam stability and viscosity. It is widely used in liquid soap, shampoo, shower gel, and other soap-based products.
BI THK150PTSL
BI THK150PTSL is a highly efficient, cost-effective thickener for surfactant-based systems. It can effectively replace CDEA and CMEA, thereby increasing foam stability and viscosity. It is in liquid form and easy to use. It is widely used in liquid soap, shampoo, shower gel, and other soap-based products.
BI UV-AVB
BI UV-AVB is the most widely used oil-soluble UVA filter. It can effectively block UVA and increase the SPF value of sunscreen products. It can combine with UVB filters to improve the effectiveness of sunscreen products. It can protect skin from UV damage. It can be used in sunscreen and baby sunscreen products.
BI UV-BEMT
BI UV-BEMT is an oil-soluble UVA and UVB absorber. It offers protection against UVA rays in the the 290-350 nm range is part of the UVB spectrum. It has high photostability and is not easily absorbed by the skin. It can effectively stabilize avobenzone, unaffected by OMC and titanium dioxide. It is widely used in sunscreen, day care products, and skin lightening products.
BI UV-BOE
BI UV-BOE provides ultra-wide spectrum UVA and UVB protection with its unique packaging technology, preventing chemical components from being absorbed by the skin. It’s very mild and refreshing. It can also form a protective film on the skin, providing long-lasting UV protection. It is widely used in sunscreen and baby sunscreen products.
BI UV-BP3
BI UV-BP3 is an oil-soluble broad-spectrum UV absorber with high absorption efficiency. It can promote the SPF value and protect skin from sunburn and suntan. It is widely used in sunscreen, lipstick, nail polish, and hair care products. Compliance Highlights Available
BI UV-BP4
BI UV-BP4 is an effective water-soluble ultraviolet absorbent, which is widely used to protect products from ultraviolet radiation damage and used in sunscreen products to protect our skin from ultraviolet radiation. It can enhance the absorption of other chemicals in sunscreen products, but it will not be absorbed by the skin itself. It can stabilize the sunscreen gel when it is exposed to UV radiation. It also helps to stabilize UV-sensitive formulations, such as hair dye, hair spray, and facial conditioning emulsions. It is also widely used in nail polish, cream, and lipstick.
BI UV-DBT
BI UV-DBT provides ultra-wide spectrum UVA and UVB protection with its unique packaging technology, preventing chemical components from being absorbed by the skin. It’s very mild and refreshing. It can also form a protective film on the skin, providing a long-lasting UV protection. It is widely used in sunscreen and baby sunscreen products.
BI UV-DEB
BI UV-DEB provides ultra-wide spectrum UVA and UVB protection with its unique packaging technology, preventing chemical components from being absorbed by the skin. It’s very mild and refreshing. It can also form a protective film on the skin, providing a long-lasting UV protection. It is widely used in sunscreen and baby sunscreen products.
BI UV-DEE
BI UV-DEE provides ultra-wide spectrum UVA and UVB protection. It’s very mild and refreshing. It can also form a protective film on the skin, providing a long-lasting UV protection. It is widely used in sunscreen and baby sunscreen products. Compliance Highlights Available
BI UV-DHHB
BI UV-DHHB is an oil-soluble UVA absorber with excellent photostability and compatibility with other UV absorbers. It provides outstanding protection from free radicals and skin damage. It is widely used in sunscreen and color cosmetics. Compliance Highlights Available
BI UV-EBB
BI UV-EBB provides ultra-wide spectrum UVA and UVB protection with its unique encapsulation technology, reducing the absorbtion of UV filters by the skin. It's very mild and refreshing. It can also form a protective film on the skin, providing a long-lasting UV protection. It is widely used in sunscreen.
BI UV-EHS
BI UV-EHS is an oil-soluble UVB absorber with high safety. It can stabilize avobenzone, resulting in longer-lasting sun protection. It can be used in combination with other sunscreen agents to achieve a high SPF value at a low dosage. It is widely used in sunscreen and color cosmetics.
BI UV-EHT
BI UV-EHT is an oil-soluble UVB absorber with high stability. It can achieve a high SPF with a low dosage. It shows good affinity to the keratin in the skin and is insoluble in water, so that suitable for water-resistant formulations. It is widely used in sun care products and color cosmetics.
BI UV-HMS
BI UV-HMS is an oil-soluble UVB absorber suitable for water-resistant formulas. It protects the skin from UVB damage and reduces the long-term harmful effects of exposure to sunlight. It is an excellent solubilizer for crystalline UV absorbers such as avobenzone. It is widely used in sunscreen, skin whitening products, and skin care products.
BI UV-HS
BI UV-HS is a water-soluble UVB absorber. It can be used in combination with other ingredients, such as avobenzone, titanium dioxide, and zinc oxide, and increases the SPF value of sunscreen products at low dosages. It provides excellent photostability and high safety, and leaves the skin feeling dry. It is widely used in sunscreen products.
BI UV-ITZ
BI UV-ITZ is an oil-soluble UV absorber with strong UVB protection. It can achieve high SPF value at low dosage and prevent skin from light damage. In addition, it exhibits high specific extinction and excellent solubility, making it highly effective. It is widely used in color cosmetics, sunscreen and lipstick.
BI UV-MBC
BI UV-MBC is an oil-soluble UVB absorber. It can increase SPF at low dosage when used with other UV filters. It also helps to improve the light stability of avobenzone. It is widely used in sun care products and color cosmetics. Compliance Highlights Available
BI UV-OCR
BI UV-OCR is an effective Oil-soluble UVB absorber. It can provide excellent protection for the skin against photo damage and premature ageing at low doses. It shows good photostability and improves the light stability of avobenzone. It is widely used in sun care products and color cosmetics.
BI UV-OMC
BI UV-OMC is an oil-soluble UVB absorber ideal for water-resistant sunscreen products. It can effectively protect the skin from damage. It is an excellent solubilizer for crystalline UV absorbers and can achieve a high SPF value when used with other UV filters. It is widely used in cream, lotion, foundation, sunscreen, and color cosmetics.
BI UV-SLX15
BI UV-SLX15 is an oil-soluble UVB absorber. It can produce a synergistic effect when used with other UV filters, increase SPF value, and leave a smooth and silky skin feel. In addition, it can also stabilize avobenzone effectively. When added to hair care products, it can strongly stay on the hair, preventing hair fading and improving hair glossiness. It is widely used in sunscreen and hair care products.
BI UV-TSM
BI UV-TSM is a broad-spectrum UV absorber providing strong UVA and UVB protection. It can not only absorb but also scatter and refract UV light, achieving a triple sunscreen effect. As a ready-to-use dispersion, it can be simply added to the water phase or at the end of the emulsion process, and can be processed cold. It is widely used in sunscreen and color cosmetics.
BI Whit- Kojic Acid
BI Whit- Kojic Acid is a melanogenesis inhibitor. It chelates copper ions at the active site of tyrosinase, deactivating the enzyme to suppress tyrosinase activity and block melanin synthesis, making it a functional raw material for skin brightening and hyperpigmentation improvement. It is widely used in skincare products and helps improve freckles, age spots, hyperpigmentation and acne concerns. It also scavenges free radicals and delivers antioxidant benefits.
Bifilm 50
Bifilm 50 is developed as an excellent water-resistance film former for cosmetic product such as mask, sun care, eyeliner and mascara. It is easy to use, especially suitable for cold processes. When used in mascara, it has effect of extending and voluming-up eyelashes. It has good compatibility with a broad range of cosmetic ingredients.
Bifilm ACG
Bifilm ACG is a styling polymer and film former with long-lasting hold, strong hold, low flaking, and good conditioning properties. It imparts long-lasting hold and improved stiffness even in high-humidity conditions. Meanwhile, it shows excellent self-thickening ability, which makes it ideal for producing highly viscous styling products with less carbomer. It is widely used in styling gel, styling cream, styling wax, non-aerosol mousse, and spray.
Bifilm ACW
Bifilm ACW is a styling polymer and film former with long-lasting hold, strong hold, low flaking, and good conditioning properties. It imparts long-lasting hold and improved stiffness even in high-humidity conditions. Meanwhile, it is stable at high temperatures. It is widely used in styling water, styling spray, and non-aerosol mousse.
Bisil 010
Bisil 010 is a polydimethylsiloxane polymer with a wide range of viscosities. Its distinctive properties make it a useful ingredient in many skin and hair care products. For hair care, it improves the combing of tangled hair and gives hair a brighter shine. It forms a slick, lubricating coat around each strand of hair, allowing a comb to move through with less resistance. For skin care, it acts as a skin protectant and emollient, appearing as an ingredient in many over-the-counter moisturizing lotions and skin creams, as well as in some makeup products. Even diaper rash creams for babies often add this chemical to soothe the irritated skin.
Bisil 034
Bisil 034 is an organosilicon. It is compatible with cosmetic oils with excellent spreadability. It reduces the rub-on time of creams and lotions, providing a silky after-feel. It can make the products have good spreading and smearing properties, while also significantly improving their lightweight, lasting, moisturizing, and silky touch. It is widely used in a wide range of personal care applications, including skin care, cosmetics, antiperspirant, deodorant, and sun care.
Bisil 050
Bisil 050 is a polydimethylsiloxane polymer with a wide range of viscosities. Its distinctive properties make it a useful ingredient in many skin and hair care products. For hair care, it improves the combing of tangled hair and gives hair a brighter shine. It forms a slick, lubricating coat around each strand of hair, allowing a comb to move through with less resistance. For skin care, it acts as a skin protectant and emollient, appearing as an ingredient in many over-the-counter moisturizing lotions and skin creams, as well as in some makeup products. Even diaper rash creams for babies often add this chemical to soothe the irritated skin.
Bisil 100
Bisil 100 is a polydimethylsiloxane polymer with a wide range of viscosities. Its distinctive properties make it a useful ingredient in many skin and hair care products. For hair care, it improves the combing of tangled hair and gives hair a brighter shine. It forms a slick, lubricating coat around each strand of hair, allowing a comb to move through with less resistance. For skin care, it acts as a skin protectant and emollient, appearing as an ingredient in many over-the-counter moisturizing lotions and skin creams, as well as in some makeup products. Even diaper rash creams for babies often add this chemical to soothe the irritated skin.
Bisil 1000
Bisil 1000 is a polydimethylsiloxane polymer with a wide range of viscosities. Its distinctive properties make it a useful ingredient in many skin and hair care products. For hair care, it improves the combing of tangled hair and gives hair a brighter shine. It forms a slick, lubricating coat around each strand of hair, allowing a comb to move through with less resistance. For skin care, it acts as a skin protectant and emollient, appearing as an ingredient in many over-the-counter moisturizing lotions and skin creams, as well as in some makeup products. Even diaper rash creams for babies often add this chemical to soothe the irritated skin.
Bisil 1214
Bisil 1214 is a compound of high molecular weight dimethicone and cyclopentasiloxane. cyclopentasiloxane, as a solvent and carrier, spreads the high molecular weight dimethicone evenly and well on skin and hair. When cyclopentaxiloxane volatilizes, a film of organic silicone is left on skin and hair. It is widely used in hair care and skin care products, providing lubricous and clear velvet feeling. It forms a silky film of water resisting on skin and hair, repairing the damaged hair and providing skin with a smooth and dry feel similar to talcum powder. It also helps increase the substantivity of organic ingredients such as ultraviolet absorbers, emollients and moisturizers.
Bisil 1.25M-6M
Bisil 1.25M-6M is a polydimethylsiloxane polymer with a wide range of viscosities. Its distinctive properties make it a useful ingredient in many hair care products. For hair care, it improves the combing of tangled hair and gives hair a brighter shine. It forms a slick, lubricating coat around each strand of hair, allowing a comb to move through with less resistance.
Bisil 1401
Bisil 1401 is a silicone oil that provides a lubricious, clear skin feeling like velvet. It has filming. water-resistant, damaged hair repairing effects. Provides a smooth and dry feel similar to talc powder. Enhances the substantivity of organic ingredients, including ultraviolet absorbers, emollients, and moisturizers.
Bisil 1403
Bisil 1403 is a polyorganosiloxane blend with high skin affinity that forms a uniform silicone protective film. It provides a smooth and silky skin feeling and makes the finished products more shine. Compliance Highlights Available
Bisil 339
Bisil 339 is a milky neutral emulsion including 30% amodimethicone, quaternized cationic surfactant and degradable nonionic surfactant. With excellent conditioning ability, it’s widely used in shampoo, conditioner, hair dressing treatment and styling products to provide favorable wet & dry combability and puffy feel. With strong affinity to hair, it can repair dyed and cold waved hair, damaged, rough, dry hair caused by chemical process, make hair smooth, easy to manage.
Bisil 350
Bisil 350 is a polydimethylsiloxane polymer with a wide range of viscosities. Its distinctive properties make it a useful ingredient in many skin and hair care products. For hair care, it improves the combing of tangled hair and gives hair a brighter shine. It forms a slick, lubricating coat around each strand of hair, allowing a comb to move through with less resistance. For skin care, it acts as a skin protectant and emollient, appearing as an ingredient in many over-the-counter moisturizing lotions and skin creams, as well as in some makeup products. Even diaper rash creams for babies often add this chemical to soothe the irritated skin.
Bisil A339
Bisil A339 is a reactive cationic emulsion containing 36% amodimethicone polymers. With excellent conditioning ability, it’s widely used in shampoo, conditioner, hair dressing treatment, and styling products to provide favorable wet and dry combability and puffy feel. With a strong affinity for hair, it can repair dyed and cold-waved hair, as well as damaged, rough, and dry hair caused by chemical processes, making hair smooth and easy to manage.
Bisil AMD
Bisil AMD is a compound of amino groups connected on both ends of the long-chain polydimethylsiloxane. It can form a protective film on the hair, repairing damaged areas and improving both dry and wet combing performance. Meanwhile, it imparts a silky, smooth, and elegant feeling to the hair. It is widely used in 2-in-1 shampoo, rinse-off conditioner, leave-on conditioner, hair dye products, and hair styling products.
Bisil D5
Bisil D5 is colorless and transparent liquid without odor and irritation, widely used in personal care products such as make-up, skin care, hair care, sunscreen, antiperspirant and deodorant products. It’s easy to use and spread, imparting soft and lubricious feel to skin and hair. It is highly compatible with many cosmetic ingredients, without residues after evaporation. It can reduce surface tension and help to disperse pigments.
Bisil E193
Bisil E193 is a safe water-soluble silicone with good moisturizing, foam-stabilizing, and conditioning properties. It can be used as a hair conditioner, providing a silky feeling for hair, as well as a skin emollient. It is also widely applied in 2-in-1 shampoo, styling products, soap, shaving products, skin lotions, make-up foundations, and anti-perspirant products.
Bisil E6038
Bisil E6038 is a lipophilic silicone polyether modified, which has excellent W/Si and W/O emulsification. It exhibits good emulsification for both silicone and non-silicone oils, as well as excellent dispersing ability for powder materials. Compliance Highlights Unavailable
Bisil EM0280
Bisil EM0280 is a reactive cationic emulsion. With excellent conditioning ability, it’s widely used in shampoo, conditioner to provide favorable wet and dry combability and a puffy feel. With a strong affinity for hair, it can repair dyed and cold-waved hair, as well as damaged, rough, and dry hair caused by chemical processes, making hair smooth and easy to manage.
Bisil EM1785
Bisil EM1785 is a small-particle-size silicone emulsion, with 60% high-molecular-weight dimethiconol emulsified by anionic surfactant. It is recommended for use in 2-in-1 shampoo and hair conditioner, enhancing both dry and wet combability, and imparting hair lubricity and luster. Additionally, it is used in body wash as an emollient for the skin, providing a moisturizing and lubricating feel.
Bisil EM90
Bisil EM90 is a non-ionic W/O silicone emulsifier. It has good compatibility with silicone oil and various oils, able to emulsify high-content vegetable oils, active ingredients, organic sunscreen and physical sunscreen. As an organosilicon, it also has the ability to lubricate the skin, lock water, leaving skin silky feeling. In addition, it improves the dispersion, durability and adhesion of powder in formulation and prolongs the duration of pearl luster. With these properties, it is widely used in color cosmetic, cream and lotion.
Bisil ES94
Bisil ES94 is a large molecular weight silicone cross-linking copolymer dispersing in volatile silicone oil. It provides a soft, moist, silky smooth, and dry refreshing feel, covers tiny wrinkles, and makes wrinkles instantly visually disappear with its elasticity. When used in make-up primer and foundation, it can greatly improve the spreadability of make-up products and make it look more skin-fitting and natural. With sebum-controlling and matte properties, it reduces the formulation's stickiness and can enhance softness and smoothness.
Bisil ES940
Bisil ES940 is a mixture of high molecular weight silicone elastomer and cyclopentasiloxane. It is clear to translucent gel, well dispersible in oil phase. When formulated into W/O emulsions, water-in-silicone oil, and O/W emulsions and anhydrous products, it provides dry smoothness and a light silky skin, non-greasy feel. skin, non-greasy feel. It can present a matte texture, relatively moist, silky and smooth after application, leaving the skin feeling fresh and refreshing after application.
Bisil ES941
Bisil ES941 is a silicone gel made from dimethicone/vinylsiloxane crosspolymer and low-viscosity dimethicone. It provides a smooth skin feel, long-lasting moisturizing effect, and soft-focus effect of the final product. It can also be used as a thickener to improve the stability of the product.
Bisil ES942
Bisil ES942 is a mixture of a high molecular weight crosslinked silicone elastomer and 5 cst polydimethylsiloxane. It is a high-content, high-consistency, matte silicone elastomer. It can enhance the velvety skin feel, improve oil absorption, and achieve a soft-focus and matte effect in the final product. It can be used as a thickener to improve the stability of the product. It has a matte texture, but will have a slight reflection. The skin feels slightly thick and heavy.
Bisil ES943
Bisil ES943 is a mixture of a high molecular weight crosslinked silicone elastomer and 5 cst polydimethylsiloxane. It is a high-content, high-consistency, matte silicone elastomer. It can enhance the velvety skin feel, improve oil absorption, and achieve a soft-focus and matte effect in the final product. It can be used as a thickener to improve the stability of the product. Its skin feels thicker and heavier. It can present a completely matte effect, with excellent pore coverage.
Bisil ES944
Bisil ES944 is a mixture of high molecular weight silicone elastomer in cyclopentasiloxane. Since a clear to slightly translucent gel, it could be dispersed in oil phase excellently. The product may be formulated into W/O emulsions, water-in-silicone oil, and O/W emulsions, and anhydrous products to provide dry smoothness and a light, silky skin, non-greasy feel. Glossy when applied, but the surface becomes misty after retention. The skin feels smooth and moisturized, which can adjust the skin's feeling.
Bisil ES95
Bisil ES95 is a large molecular weight silicone cross-linking copolymer dispersing in volatile silicone oil. It provides a soft, moist, silky smooth, and dry refreshing feel, covers tiny wrinkles, and makes wrinkles instantly visually disappear with its elasticity. When used in make-up primer and foundation, it can greatly improve the spreadability of make-up products and make it look more skin-fitting and natural. With sebum-controlling and matte properties, it lowers the stickiness of the formulation and can improve softness and smoothness.
Bisil ES960
Bisil ES960 is a matte silicone elastomer mixed with high molecular weight crosslinked silicone elastomer and 1.5 cst dimethicone. It provides a velvety skin feel, oil absorption, soft-focus, and a matte effect in the final product. It can also be used as a thickener to improve the stability of the product. It presents a matte texture that is relatively light, silky, and smooth after application, with good film-forming properties.
Bisil ES98
Bisil ES98 is a mixture of high molecular weight silicone elastomer and cyclopentasiloxane. It is clear to translucent gel, well dispersible in oil phase. When formulated into W/O emulsions, water-in-silicone oil, and O/W emulsions and anhydrous products, it provides dry smoothness and a light silky skin, non-greasy feel. skin, non-greasy feel. It can present a matte texture, relatively moist, silky and smooth after application, leaving the skin feeling fresh and refreshing after application.
Bisil FM-803
Bisil FM-803 is a 100% silicone MQ resin with good film-forming ability. It is soluble in low viscosity silicone oils and organic solvents. It provides excellent transfer and wash-off resistance. It is widely used in sunscreen, color cosmetics, cream, and lotion.
Bisil FM-D50
Bisil FM-D50 is a combination of cyclopentasiloxane and high molecular weight silicone resin. It forms a water-resistant and anti-migration film layer on the skin, making the makeup long-lasting. It is widely used in color cosmetics and skin care products.
Bisil FM-KPD30
Bisil FM-KPD30 is a mixture of high molecular weight acrylates/tris(trimethylsiloxy)silylpropyl methacrylate copolymer and cyclopentasiloxane, forming a shine hydrophobic, anti-migration film with good washing durability and affinity to skin. Compliance Highlights Available
Bisil FM-KPI30
Bisil FM-KPI30 is a mixture of high molecular weight acrylates/tris(trimethylsiloxy)silylpropyl methacrylate copolymer and isododecane, forming a shine, hydrophobic, anti-migration film with good washing durability and affinity to skin. Compliance Highlights Available
Bisil FM-M40
Bisil FM-M40 is a combination of polydimethylsiloxane and high molecular weight silicone resin. It can form a water-resistant and anti-migration film layer on the skin, which can make the makeup long-lasting. It is widely used in color cosmetics and skin care products.
Bisil FM-TC75
Bisil FM-TC75 is mixed with modified MQ silicone resin and isododecane. It can form a wash-off and anti-migration film. It has better water repellence than dimethicone and provides good adhesiveness for powder cosmetics. It is widely used in skin care products, color cosmetics.
Bisil P150D
Bisil P150D is a natural silica microsphere with high resistance to high temperature and chemical corrosion. It is non-toxic and stable, with an average particle size of 8 microns to 15 microns. Its high sphericity achieves the ball-bearing effect, generating silky texture and smooth slip. Furthermore, these microspheres have strong oil-absorbing capacity, which can efficiently relieve greasiness and bring a silky, refreshing feel.
Bisil P305C
Bisil P305C is a natural silica microsphere coated with methicone, resistant to high temperatures and chemical corrosion. It is non-toxic and stable, with an average particle size of 4 microns to 9 microns. The high spheroidization rate produces the "rolling ball" effect, resulting in a silky texture and smooth feel. It has good flowability and dispersibility, is pressure-resistant, and enhances product durability and natural makeup effects. Additionally, these microspheres have a certain oil absorption capacity, reducing greasiness and offering a silky, refreshing feel. Treated with methicone, it has stronger hydrophobic properties, which extend the longevity of makeup.
Bisil P305L
Bisil P305L is a natural silica microsphere, resistant to high temperatures and chemical corrosion. It is non-toxic and stable, with an average particle size of 4 microns to 9 microns. The high spheroidization rate produces the "rolling ball" effect, resulting in a silky texture and smooth feel. It has good flowability and dispersibility, is pressure-resistant, and enhances product durability and natural makeup effects. Additionally, these microspheres have a certain oil absorption capacity, reducing greasiness and offering a silky, refreshing feel.
Bisil P556
Bisil P556 is an excellent emollient with a non-oily feeling and good compatibility with cosmetic ingredients, widely used in skin and hair care products such as body creams and lotions, sunscreen products, make-up products, deodorants, antiperspirants, and hair conditioners.
Emol 14S
Emol 14S is a quaternized water-soluble derivative of natural guar gum. It can be easily dispersed in water due to the extra surface treatment. It forms a “free breathing” film on hair and skin, providing good protection, moisturization, conditioning, and lubricity.
Emol 22
Emol 22 is a highly charged cationic co-polymer, demonstrating both anionic and cationic characteristics. It has excellent pH stability and is a good conditioning polymer used in hair and skin care products. Compliance Highlights Available
Emol 28
Emol 28 forms clear, glossy films that are flexible and tack-free. It is water soluble, stable to hydrolysis at low or high pH (3-12), and compatible with anionic surfactants, as well as nonionic and amphoteric. Its cationic nature gives substantivity to hair and skin, providing conditioning and manageabiliy with minimum build-up. Emol 28 enhances the wet combability of hair and demonstrates good curl retention performance in styling products.
Emol 39
Emol 39 is a polyquaternium polymer. With good affinity to the keratin of hair and skin, it imparts good combing ability in shampoo and conditioner, good moisturizing and silky-feeling in body wash,skin cream, conditioning and style-fixing effect in styling product. It is also applicable in hair cold wave and hair dye.
Emol 400
Emol 400 is a widely used water-soluble cationic conditioner in hair care products, with anti-static and moisturizing properties. It forms a transparent film on hair and is easily absorbed by proteins, providing a visible sheen, repairing damaged hair, and imparting good moisture and manageability for hair. When used in skin care products, it reduces irritation caused by surfactants, restores the self-protection ability of skin, leaving skin with moisture, lubricity, and an elegant after feel.
Emol 47
Emol 47 is a quaternized terpolymer made from acrylic acid, methyl acrylate and methyl acrylamide, compatible with anionic surfactant. It imparts outstanding detangling and dry &wet combability when used in hair care products and skin care products. Compliance Highlights Available
Emol 6
Emol 6 is a polymer of dimethyl diallyl ammonium chloride. It is easy to dissolve in water and not easy to combust, with strong coagulated dint and good water solution stability. It is stable in wide pH range. It has good anti-chlorine ability and high charge density. This characteristic makes it become an ideal product in hair care products and skin care products. It acts as anti-static agent, film former and hair fixative.
Emol 7
Emol 7 is a water-soluble quaternized polymer that is compatible with anionic, cationic, nonionic, and amphoteric surfactants. It is widely used in shampoo and hair conditioner to improve dry & wet combing, emollience, and gloss of hair. Compliance Highlights Available
Emol 80
Emol 80 is a cation polymer offering excellent affinity to the hair keratin. It shows outstanding anti-static ability and effectively improve hair dry and wet combing properties, without leaving a greasy after feel and makes hair manageable. In addition, it imparts a silky and smooth skin feeling like silicone oil. It is widely used in shower gel, hair conditioner, shampoo and liquid soap.
Emu 165
Emu 165 is a nonionic self-emulsifying glyceryl monostearate, used as a primary emulsifier for all types of O/W cream or lotion systems. It has excellent electrolyte tolerance, so the emulsion formed with Emu165 is stable in the presence of high levels of electrolyte. It can also be combined with other emulsifiers as a co-emulsifier.
Emu 35
Emu 35 is a high-efficacy rheology modifier, stabilizer, thickener and emulsifier used in lotion and cream. When using this product, neutralization or heat is not needed and it swells immediately to create fine-texture gels and creams. It can be added in any step to achieve an ideal viscosity. Emu 35 is capable of emulsifying all kinds of oils and dispersing pigments and physical sunscreen products. Application covers over a wide range of pH (3.5-11.5).
Emu 45
Emu 45 is a liquid, ready-to-use rheology modifier, stabilizer, thickener, and emulsifier. It swells quickly, allowing you to create gel or cream immediately without neutralization or heat. It can emulsify various oils and disperse both pigments and physical sunscreens. It is recommended for use in skin creams, creamy gels, and as a single or combined emulsifier. It can be used over a wide range of pH and makes it possible to obtain soft, supple, and shining textures.
Emu 95
Emu 95 is high-performance cold-processable emulsifier which does not require neutralization. As made from cationic acrylic copolymer, it has good cationic conditioning property, able to thicken and stabilize emulsion with cationic materials and suspend solid particle. It has special structure to form pseudo-plastic gel which is easy to break by shearing. But after the shearing force is gone, the structure will recover quickly to original state.
Emu A25
Emu A25 is a traditional, popular O/W emulsifier synthesized by natural saturated fatty alcohol and ethylene oxide. It can resist inorganic salt, high or low pH, and stabilizing creams. It is widely used in creams, lotions, as well as AHA and strong alkali formulas like hair dye and depilatory cream.
Emu C100
Emu C100 is a green O/W non-ionic emulsifier, made from the condensation reaction of natural glucose and natural fatty alcohol. It forms a stable and layered crystal structure system, with a very silky and moisturizing skin feel. It emulsifies all kinds of oils, like silicone oils and plant oils.
Emu CO40
Emu CO40 is a polyethylene glycol derivative of hydrogenated castor oil with an average of 40 moles of ethylene oxide. It is classified as both an alkoxylated alcohol and a glyceryl ester and derivative. It is used in cosmetics and fragrances, acting as a nonionic solubilizer and emulsifier.
Emu DPHS
Emu DPHS is a W/O emulsifier which can emulsify all kinds of oils and resist to high electrolyte and ethanol. It can be made into W/O products containing 90% aqueous phase and with high percentage of solid powder. It can also effectively solve the problem of bad appearance and thermal stability of cream.
Emu E75-SBG
Emu E75-SBG is a water-soluble non-ionic emulsifier derived from shea butter. It is very mild and can help reduce the irritation caused by surfactants. It can improve the appearance of foam and provide a soft, lubricious skin feel. It is widely used in skin care products, sunscreen, hair care products, and facial cleansers.
Emu EMT10
Emu EMT10 is a solid anionic acrylic polymer. It dissolves quickly in water and can be made into a paste at room temperature. It is used for thickening aqueous solutions and stabilizing O/W lotions. It exhibits excellent emulsifying, thickening, and stabilizing properties, even at low dosages, particularly in the presence of a high percentage of the oil phase. Under a wide range of pH, its thickening ability can be maintained. It also has a certain ability to withstand electrolytes.
Emu HAT
Emu HAT is a pre-neutralized powdery polymer. It boasts excellent emulsifying, thickening and stabilizing performance and dissolves rapidly in water with no heating or neutralization required. It retains thickening performance across a wide pH range of 4 to 9 and features moderate electrolyte resistance.
Emu L4
Emu L4 acts as an emulsifier and wetting agent, improving product spreadability and stability. It can effectively reduce surface tension and play roles such as emulsification, solubilization, and dispersion. It is mild to the skin and eyes. It can reduce irritation and improve the foam quality of the formulation.
Emu PG12-DIS
Emu PG12- DIS is a high-performance emulsifier with excellent compatibility with both polar and non-polar oils. It provides strong cleansing ability while enhancing slip during application, reducing friction and helping minimize skin irritation in cleansing formulations. It’s widely used in cleansing oil, cleansing cream, facial cleanser, shampoo, body wash and other products.
Emu PG2-DPHS
Emu PG2-DPHS is an EO-free W/O emulsifier derived from a vegetable source and suitable for cold-processed products. It exhibits excellent emulsifying performance, regardless of the molecular weight and polarity of the oils.It is widely used in liquid foundation, sunscreen, cream, and lotion.
Emu PG2-TS
Emu PG2-TS is a W/O co-emulsifier. It has an excellent pigment dispersing ability, and excellent ability for preventing sweating of lipsticks and oil-based foundations. It can improve the glossiness and stability of the product. It is wildly used in waterproof sunscreen, foundation, lipstick and skin creams and lotions for dry skin.
Emu PG20-TIS
Emu PG20-TIS is a mild emulsifier with excellent self-emulsifying ability. It is easy to rinse with no oily residue. The HLB value is about 8. It exhibits good compatibility with most oils and has a high molecular weight, which makes it less likely to penetrate the skin and causes less irritation. It is widely used in cleansing oil, cleansing cream, cleansing balm, and other similar products.
Emu PG3-DS
Emu PG3-DS is a natural, PEG-free W/O emulsifier that can be used in a cold process. It can bring a soft, light, and powdery skin feel. It is very mild and suitable for sensitive skin, making it ideal for baby care products. It is widely used in cream, lotion, sunscreen, and color cosmetics.
Emu PG3-PC
Emu PG3- PC is a versatile natural polyglycerol ester emulsifier, acting as W/O emulsifier and co- emulsifier, suitable for cold processing. It delivers a soft, light, and velvety skin feel and exhibits excellent pigment-dispersing capacity. It is applicable to skin care, sunscreens, and color cosmetics.
Emu PG6-GTCC
Emu PG6-GTCC can be used as a non-ionic surfactant with good emulsifying ability and water-solubility. It can quickly emulsify and dissolve various oils and pigments, making the makeup easy to remove. When applied in cleaning products, it can lock in water, thereby improving the softness of the skin after cleaning. It is widely used in transparent make-up removers and cleansing products.
Emu SAT
Emu SAT is a ready-to-use liquid polymer delivering excellent thickening, stabilizing and texturizing performance. It swells rapidly, allowing instant preparation of gels and creams without heating or pH neutralization. It boasts favorable stability across a broad pH range of 5.0 to 11.0 and is compatible with all fatty phases, physical UV filters and pigments. It delivers a soft, fresh, non-tacky skin feel and is widely applied in creams, lotions, sunscreens and liquid foundations
Emu SB30-TOE
Emu SB30-TOE is a very mild emulsifier and solubilizer, offering good compatibility with most oils. It is easy to rinse with no oily residues, making it suitable for cleansing oils. Compliance Highlights Available
Emu SG
Emu SG is a 100% natural origin anionic O/W emulsifier with excellent emulsifying ability in low dosage. It can form lamellar liquid crystal emulsions. It is a good choice in pure amino acid facial cleanser and is popular to combine with sodium lauroyl glutamate or other mild surfactants to create a mild paste facial cleanser. It is easy to disperse and has good compatibility with electrolytes and water-soluble UV filters.
Emu SS
Emu SS is a natural glucose derivative. It is an excellent nonionic W/O emulsifier, typically used in conjunction with Emu SSE20, a natural glucose-based product. This combined use provides high safety, excellent emulsifying capacity, and long-lasting viscosity stability, causing no irritation to the eye and skin.
Emu SSE20
Emu SSE20 is a natural glucose derivative. It is an excellent nonionic O/W emulsifier, typically used in conjunction with Emu SS, a natural glucose-based product. This combined use provides high safety, excellent emulsifying capacity, and long-lasting viscosity stability, causing no irritation to the eye and skin.
Emu WO
Emu WO acts as an W/O emulsifier used for preparing formulas containing silicone oils or polar oils. It shows remarkable spreadability by forming a thixotropic gel structure, imparting the cream with a smooth texture and bright appearance. It can also enhance the dispersion of powder and pigment.
Grease 810C
Grease 810C is a moisturizing emollient with a light feel, which can be a natural silicone alternative. It has good spreadability and leaves a soft, powdery after-feel on the skin. It can also form an invisible and ultra-silky film that provides a long-term moisturizing effect.
Grease AB
Grease AB is a medium spreading emollient with good solubilizing properties for crystalline UV-filters, with exceptionally light, non-greasy properties, widely used in skin care products, sunscreens, antiperspirants/deodorants, color cosmetics, hair styling products, conditioners, and conditioning shampoos.
Grease DES
Grease DES is a diester produced by the reaction of succinic acid and ethoxyethanol. Its solubility in water is 3% and in 10% ethanol is 5%. It can be prepared into a transparent solution. It is suitable for water-based products or products with an aqueous alcohol system. In addition, it provides the skin with a refreshing and smooth feeling, making it suitable for various personal care products. It is widely used in toner, make-up remover, essence, cream, lotion, and foundation.
Grease DIS
Grease DIS is a light solubilizer, emollient, and emulsifier with low viscosity and good spreadability. It helps to reduce the greasiness associated with mineral oil or petrolatum. It demonstrates excellent compatibility in hydro-alcoholic cosmetic formulations. It is especially suitable for sunscreen formulations. In combination with other esters, it enables very high SPF levels with reduced concentrations of UV filters, and gives the products a unique sensory quality. It is applicable to anti-erspirants, deodorants, lipsticks, creams, lotions, and sunscreen.
Grease G7C
Grease G7C is a water-soluble emollient for transparent preparations of shampoos and pearly liquid soaps. It can be incorporated as an oily component in mixed transparent gels (aqueous and oily) without high content of emulsifiers; in alcoholic lotions, such as tonics and lotions before and after shaving, which promotes a nice lubricant effect reducing the stress state of the skin. Grease G7C improves significantly the addition of active ingredients and essences in shampoo and bubble baths.
Grease GP-3
Grease GP-3 is an emollient with excellent conditioning property. It is an ideal total or partial replacement for silicone oil, suitable for “silicone-free” concept products. It can form a smooth film on the surface of hair, improving the luster and smoothness of hair. It is widely used in shampoo, shower gel, facial cleanser and hair conditioner.
Grease GTCC
Grease GTCC is a vegetable-based ingredient that acts as emollient and solvent. It has excellent spreadability without greasy feel. It is an effective skin-softening ingredient that helps to replenish the skin and prevent moisture loss. It is used for a wide variety of personal care products.
Grease IOP
Grease IOP is the fatty acid ester derived from 2-ethyhexyl alcohol and palmitic acid. It offers skin good moisturizing feeling without sticky, and provides good spreading capacity, no irritation to skin. It is a non-occlusive emollient and can be used as a replacement for mineral oil.It is widely used in cream, lotion, sunscreen and color cosmetics.
Grease IPM
Grease IPM acts as an emollient, providing a soft, smooth feel to the skin and enhancing skin barrier function. It is an excellent dispersing medium that is suitable for all cosmetic applications. Compliance Highlights Available
Grease LL
Grease LL has excellent moisturizing effect with low viscosity and it makes skin feel fresh. It can reduce the viscosity of greasy heavy oil ester. It can be easily emulsified. The finished products can release small molecules of AHA over skin through the action of enzymes to make skin delicate. It can promote the skin regeneration and maintaining the skin tender and exquisite. It also shows excellent thickening properties in surfactant system. It is applied in bath gel, shampoo, lipstick, cream, lotion and make-up base.
Grease MOD
Grease MOD is an emollient ester with excellent pigment dispersibility and low odor. It is an ideal choice for lipstick. It can increase the smoothness and elasticity of lipstick and other rod products. It has a moisturizing but non-greasy feel, making it especially suitable for tanning lotion. It can be used as a pigment dispersant, a moisturizing and softening agent in an emulsion. It is widely used in cosmetics, lipsticks, creams, and lotions.
Grease PG-3BM
Grease PG-3BM is an emollient ester with excellent dispersion and lubrication properties. It provides skin with a good lubricating feeling without being greasy. And it can replace part of the silicone oil used in hair care products, making hair soft, smooth, and shiny. It is widely used in skin care and hair care products.
Grease PTIS
Grease PTIS is a 100% active and clear liquid that is compatible with a variety of personal care raw materials. It is a very moisturizing emollient with low skin ductility and is suitable for eye products. This emollient has a medium viscosity and has a non-greasy feel. It is widely used in creams, milk lotions, shampoo, sunscreen, color cosmetic and lip glosses
Grease SSCI
Grease SSCI acts as an emollient and pigment dispersant. It shows excellent dispersion effect on pigments. In color cosmetic products, it can make the pigments disperse evenly and give the finished products smooth appearance and rich texture. It also helps to improve the ductility and gives the skin a soft and long-lasting feeling.
Grease TGB
Grease TGB is a light weak-polar emollient with delicate touch, excellent spreadability and air permeability. It can reduce the greasiness of emulsified system. It has low cloud point and excellent frost resistance which can provide excellent frost resistance to the finished products, and it is stable at low temperature. It has excellent hydrolytic stability, compatibility especial with silicone oil. It is widely used in creams, lotions, make-up remover and lipstick. In addition, it can also be applied in toner to avoid the degreasing of alcohol.
Grease TMTD
Grease TMTD is an excellent emollient with thick skin feeling but not sticky and provides a soft feeling. It is an excellent pigment dispersant and can be used as a whole or part of the substitute for castor oil and lanolin in lipstick. It can prevent the color of the lipstick from being layered and brighten the color of the lipstick. And it can increase the viscosity of the emulsion but not increase the drag feeling. It has good waterproof property and can make the skin shiny. It is widely used in night cream, eye products, color cosmetics, lipstick and lip gloss.
Polyaqua-1
Polyaqua-1 is a lightly crosslinked alkali-swellable anionic acrylic polymer emulsion. It works as an excellent rheology modifier, especially delivering unique benefits to surfactant-based cleansing products. In formulations containing high level of surfactant, it has efficient suspending and stabilizing, as well as thickening properties, able to make the formulation very clear. It works synergistically with surfactant and salt resulting in efficient suspending, stabilizing, and thickening property for insoluble ingredients like silicone and other particles. It also has the remarkable ability to enhance the pearlescent appearance of surfactant formulations, widely used in personal cleansing products.
Polyaqua-E60
Polyaqua-E60 is an easy-to-use anionic hydrophobic modified alkali-soluble acrylic polymer emulsion (HASE). It has excellent thickening properties and is suitable for systems that are hard to thicken. It has good salt tolerance and shear resistance. It is highly compatible with anionic and non-ionic surfactants and pigments. It can not only show good transparency in transparent formulations, but also enhance the pearl effect in pearlescent products.
Polyaqua-EH3
Polyaqua-EH3 is an excellent rheology modifier and suspension stabilizer suitable for neutral to alkaline formulations. It exhibits outstanding suspending capacity and thickening effect in transparent formulations with high surfactant content. Meanwhile, it has a synergistic thickening effect with salts.
Polyaqua-EH3L
Polyaqua-EH3L is a high-performance rheology modifier and suspension stabilizer. It provides excellent suspension stability and thickening in high-surfactant transparent formulations. It features synergistic thickening with salts and retains performance under alkaline conditions, suitable for neutral to alkaline systems.
Protein HC
Protein HC is a hydrolyzed protein composed of 17 amino acids. About 85% of them are glycine, alanine, serine, and tyrosine. It has a uniform molecular weight, good solubility, and high moisturizing properties. Due to its relatively small molecular weight, it can supplement nutrients through the skin and hair. It is widely used in shampoo, hair conditioner, hair dye and perm products.
Protein HCG
Protein HCG is a silylated derivative of hydrolyzed collagen. It not only provides excellent affinity, adsorption and moisturizing properties like hydrolyzed collagen protein, but also has the ability of siloxane compounds to enhance luster and film-forming properties for hair and skin. It can form a protective film on the surface of hair after heating treatment, preventing hair from heat damage. It is widely used in shampoo, hair conditioner, hair dye and perm products.
Protein HK
Protein HK is a fibrous protein composed of small molecule peptides and free amino acids with excellent conditioning effect. Its amino acid composition is similar to that of hair, so it can penetrate and repair damaged keratin. Small molecule peptides can repair hair scales by adsorbing on the surface of hair, form a protective film, enhance moisturizing effects, and make hair soft and smooth. In addition, it has a unique sulfur-containing amino acid (cysteine), which is covalently cross-linked into disulfide bonds, enhancing the toughness and strength of hair. It can form a smooth film on the hair, reducing hair split ends and improving the glossiness and combability of hair. It is widely used in shampoo, hair care products, hair styling products, body wash and skin care products.
Protein HPTW
Protein HPTW is a quaternized hydrolyzed protein which can be used as an anti-static agent and hair conditioner in hair care. It forms a film on hair to protect the hair, adsorbs on the damaged part and has a good repair effect on hair. It has excellent moisturizing effect, making hair smooth, enhancing hair gloss, obviously improving wet and dry combing ability hair. It can be used in shampoo and conditioner, and suitable for transparent shampoo.
Protein HS
Protein HS is mainly composed of eighteen amino acids, of which about 80% are glycine, alanine, serine and tyrosine. It has high moisture retention, frost resistance, nutrition and conditioning ability. It can promote and improve the vitality of scalp cells and hair, enhance the elasticity and softness of hair, and make hair shiny and easy to comb. It can also form a transparent protective film on the surface of the hair to prevent excessive evaporation of hair moisture and reduce hair frizz. It is widely used in shampoo and hair conditioner.
Protein HW
Protein HW is a kind of natural macromolecule with rich nutrition and rich in small molecular wheat protein. The molecular weight distribution is uniform and the molecular weight is small, which can supplement the nutrition and protein lost by hair and skin through skin and hair follicle. It can form a glossy protective film on the surface of hair, nourish dry and fragile hair, help solve the problem of hair tip bifurcation, and make hair fluffy and elastic. It can also increase the skin firmness, improve the softness of skin, reduce the number and depth of wrinkles. It is widely used in cream, lotion, shampoo, conditioner and other products.
Protein LHC
Protein LHC features high moisturization, film-forming ability and strong cationic property. It can adsorb onto hair surface to form a protective film, leaving hair smooth and shiny. It also boosts hair vitality and significantly improves wet and dry combability. It is widely used in shampoo, hair conditioner, dyeing and perming repair products.
Protein LHK
Protein LHK has strong cationic properties and can form disulfide bonds with the hair during the perming process, playing a role in repairing and lubricating the hair. The isoelectric point of Protein LHK is very high, and its cationic properties are still preserved at high pH values. It is widely used in shampoo, hair conditioner, dyeing, and perming repair products.
Protein VEG
Protein VEG is a multi-functional protein complex used as film former, moisturizer and hair strengthening agent. It can penetrate hair shaft to impart hair with moisture, improving hair plasticity and strength. It is widely used in shampoo, hair styling products, hair conditioner and hair dye products.