Home / Lubricants & Metalworking Fluids / Suppliers / Dow Performance Lubricants
Lubricants & Metalworking Fluids
Dow Performance Lubricants
Dow Performance Lubricants lists 73 grades in Lubricants & Metalworking Fluids. The sheets saved on this site are below.
Grades from Dow Performance Lubricants
UCON™ Quenchant RLNN
UCON™ Quenchant RLNN is a nonflammable, aqueous solution containing special polymers and corrosion inhibitors for quenching ferrous and nonferrous metals. It can replace water, oil, or brine solutions and is the preferred quenching media for both low- and high-hardenability, plain carbon, and alloy steels.
UCON™ R-4
UCON™ R-4 is a high-performing polyalkylene glycol lubricant which is compatible with all compressor types and approved by vehicle manufacturers worldwide.
UCON™ RSC-155
UCON™ RSC-155 is a high-performing polyalkylene glycol lubricant which is compatible with all compressor types and approved by vehicle manufacturers worldwide.
UCON™ TPEG 500
UCON™ TPEG 500 is a polyalkylene glycol (PAG) that is sold as a base stock for your formulation. UCON fluids and lubricants are synthetic, a key benefit to using our base stocks because they can be controlled and varied to achieve a level of performance not possible with natural oils and lubricants.
UCON™ TPEG 990
UCON™ TPEG 900 is a polyalkylene glycol (PAG) that is sold as a base stock for your formulation. UCON fluids and lubricants are synthetic, a key benefit to using our base stocks because they can be controlled and varied to achieve a level of performance not possible with natural oils and lubricants.
UCON TRIDENT™ 32 AW Hydraulic Fluid
UCON TRIDENT™ 32 AW Hydraulic Fluid provides the lubricity and performance required of industrial hydraulic fluids that must operate over wide temperature ranges. Excellent low-temperature properties permit year-round outdoor use. It is resistant to oxidation and thermal degradation as well as to sludge or varnish formation. UCON anhydrous hydraulic fluids have high viscosity indices that are unaffected by high rates of shear.
UCON TRIDENT™ 46 AW Hydraulic Fluid
UCON TRIDENT™ 46 AW Hydraulic Fluid provides the lubricity and performance required of industrial hydraulic fluids that must operate over wide temperature ranges. Excellent low-temperature properties permit year-round outdoor use. It is resistant to oxidation and thermal degradation as well as to sludge or varnish formation. UCON anhydrous hydraulic fluids have high viscosity indices that are unaffected by high rates of shear.
UCON TRIDENT™ 68 AW Hydraulic Fluid
UCON TRIDENT™ 68 AW Hydraulic Fluid provides the lubricity and performance required of industrial hydraulic fluids that must operate over wide temperature ranges. Excellent low-temperature properties permit year-round outdoor use. It is resistant to oxidation and thermal degradation as well as to sludge or varnish formation. UCON anhydrous hydraulic fluids have high viscosity indices that are unaffected by high rates of shear.
UCON™ WaterGuard
UCON™ WaterGuard (WG) Stabilizers can extend the life of lubricants formulated with esters by improving the hydrolytic stability. UCON™ WG Stabilizers act like a sponge, soaking up the free water to render it less active and kinetically slowing down the rate of hydrolysis.
SYNALOX™ 100-150B
SYNALOX™ 100-150B is a homopolymer of propylene oxide. It is insoluble in water, but is not compatible with mineral oils. Water Insoluble SYNALOX™ Fluids are particularly used as base stocks in industrial gear oils, mill, and calender lubricants. Dow offers an extensive viscosity range of SYNALOX™ Water Insoluble Fluid grades from ISO 32 to 680.
SYNALOX™ 100-40B
SYNALOX™ 100-40B is a homopolymer of propylene oxide. It is insoluble in water, but is not compatible with mineral oils. Water Insoluble SYNALOX™ Fluids are particularly used as base stocks in industrial gear oils, mill, and calender lubricants. Dow offers an extensive viscosity range of SYNALOX™ Water Insoluble Fluid grades from ISO 32 to 680.
SYNALOX™ 100-50B
SYNALOX™ 100-50B is a homopolymer of propylene oxide. It is insoluble in water, but is not compatible with mineral oils. Water Insoluble SYNALOX™ Fluids are particularly used as base stocks in industrial gear oils, mill, and calender lubricants. Dow offers an extensive viscosity range of SYNALOX™ Water Insoluble Fluid grades from ISO 32 to 680.
SYNALOX™ 100-D240
SYNALOX™ 100-D240 is a homopolymer of propylene oxide. It is insoluble in water, but is not compatible with mineral oils. Water Insoluble SYNALOX™ Fluids are particularly used as base stocks in industrial gear oils, mill, and calender lubricants. Dow offers an extensive viscosity range of SYNALOX™ Water Insoluble Fluid grades from ISO 32 to 680.
SYNALOX™ 100-D280
SYNALOX™ 100-D280 is a homopolymer of propylene oxide. It is insoluble in water, but is not compatible with mineral oils. Water Insoluble SYNALOX™ Fluids are particularly used as base stocks in industrial gear oils, mill, and calender lubricants. Dow offers an extensive viscosity range of SYNALOX™ Water Insoluble Fluid grades from ISO 32 to 680.
SYNALOX™ 100-D450
SYNALOX™ 100-D450 is a homopolymer of propylene oxide. It is insoluble in water, but is not compatible with mineral oils. Water Insoluble SYNALOX™ Fluids are particularly used as base stocks in industrial gear oils, mill, and calender lubricants. Dow offers an extensive viscosity range of SYNALOX™ Water Insoluble Fluid grades from ISO 32 to 680.
SYNALOX™ 100-D95
SYNALOX™ 100-D95 is a homopolymer of propylene oxide. It is insoluble in water, but is not compatible with mineral oils. Water Insoluble SYNALOX™ Fluids are particularly used as base stocks in industrial gear oils, mill, and calender lubricants. Dow offers an extensive viscosity range of SYNALOX™ Water Insoluble Fluid grades from ISO 32 to 680.
SYNALOX™ 40-D150
SYNALOX™ 40-D150 is a random copolymer of ethylene oxide and propylene oxide. It is soluble in cold water, but exhibits inverse solubility at high temperatures. Water based solutions provide low surface tension, good wetting and good penetration characteristics, while also exhibiting low foaming properties. Water soluble SYNALOX™ Fluids are extensively used in formulations for chemical fiber spin finishes and industrial lubricants.
SYNALOX™ 40-D220
SYNALOX™ 40-D220 is a random copolymer of ethylene oxide and propylene oxide. It is soluble in cold water, but exhibits inverse solubility at high temperatures. Water based solutions provide low surface tension, good wetting and good penetration characteristics, while also exhibiting low foaming properties. Water soluble SYNALOX™ Fluids are extensively used in formulations for chemical fiber spin finishes and industrial lubricants.
SYNALOX™ 40-D300
SYNALOX™ 40-D300 is a random copolymer of ethylene oxide and propylene oxide. It is soluble in cold water, but exhibits inverse solubility at high temperatures. Water based solutions provide low surface tension, good wetting and good penetration characteristics, while also exhibiting low foaming properties. Water soluble SYNALOX™ Fluids are extensively used in formulations for chemical fiber spin finishes and industrial lubricants.
SYNALOX™ 40-D700
SYNALOX™ 40-D700 is a random copolymer of ethylene oxide and propylene oxide. It is soluble in cold water, but exhibits inverse solubility at high temperatures. Water based solutions provide low surface tension, good wetting and good penetration characteristics, while also exhibiting low foaming properties. Water soluble SYNALOX™ Fluids are extensively used in formulations for chemical fiber spin finishes and industrial lubricants.
SYNALOX™ 50-100B
SYNALOX™ 50-100B is a random copolymer of ethylene oxide and propylene oxide. It is soluble in cold water, but exhibits inverse solubility at high temperatures. Water based solutions provide low surface tension, good wetting and good penetration characteristics, while also exhibiting low foaming properties. Water soluble SYNALOX™ Fluids are extensively used in formulations for chemical fiber spin finishes and industrial lubricants.
SYNALOX™ 50-15B
SYNALOX™ 50-15B is a random copolymer of ethylene oxide and propylene oxide. It is soluble in cold water, but exhibits inverse solubility at high temperatures. Water based solutions provide low surface tension, good wetting and good penetration characteristics, while also exhibiting low foaming properties. Water soluble SYNALOX™ Fluids are extensively used in formulations for chemical fiber spin finishes and industrial lubricants.
SYNALOX™ 50-30B
SYNALOX™ 50-30B is a random copolymer of ethylene oxide and propylene oxide. It is soluble in cold water, but exhibits inverse solubility at high temperatures. Water based solutions provide low surface tension, good wetting and good penetration characteristics, while also exhibiting low foaming properties. Water soluble SYNALOX™ Fluids are extensively used in formulations for chemical fiber spin finishes and industrial lubricants.
SYNALOX™ 50-50B
SYNALOX™ 50-50B is a random copolymer of ethylene oxide and propylene oxide. It is soluble in cold water, but exhibits inverse solubility at high temperatures. Water based solutions provide low surface tension, good wetting and good penetration characteristics, while also exhibiting low foaming properties. Water soluble SYNALOX™ Fluids are extensively used in formulations for chemical fiber spin finishes and industrial lubricants.
SYNALOX™ 55-70B
SYNALOX™ 55-70B is a random copolymer of ethylene oxide and propylene oxide. It is soluble in cold water, but exhibits inverse solubility at high temperatures. Water based solutions provide low surface tension, good wetting and good penetration characteristics, while also exhibiting low foaming properties. Water soluble SYNALOX™ Fluids are extensively used in formulations for chemical fiber spin finishes and industrial lubricants.
UCON™ 50-HB-100
UCON™ 50-HB-100 is a polyalkylene glycol (PAG) that is sold as a base stock for your formulation. UCON fluids and lubricants are synthetic, a key benefit to using our base stocks because they can be controlled and varied to achieve a level of performance not possible with natural oils and lubricants.
UCON™ 50-HB-170
UCON™ 50-HB-170 is a polyalkylene glycol (PAG) that is sold as a base stock for your formulation. UCON fluids and lubricants are synthetic, a key benefit to using our base stocks because they can be controlled and varied to achieve a level of performance not possible with natural oils and lubricants.
UCON™ 50-HB-2000
UCON™ 50-HB-2000 is a polyalkylene glycol (PAG) that is sold as a base stock for your formulation. UCON fluids and lubricants are synthetic, a key benefit to using our base stocks because they can be controlled and varied to achieve a level of performance not possible with natural oils and lubricants.
UCON™ 50-HB-260
UCON™ 50-HB-260 is a polyalkylene glycol (PAG) that is sold as a base stock for your formulation. UCON fluids and lubricants are synthetic, a key benefit to using our base stocks because they can be controlled and varied to achieve a level of performance not possible with natural oils and lubricants.
UCON™ 50-HB-3520
UCON™ 50-HB-3520 is a polyalkylene glycol (PAG) that is sold as a base stock for your formulation. UCON fluids and lubricants are synthetic, a key benefit to using our base stocks because they can be controlled and varied to achieve a level of performance not possible with natural oils and lubricants.
UCON™ 50-HB-400
UCON™ 50-HB-400 is a polyalkylene glycol (PAG) that is sold as a base stock for your formulation. UCON fluids and lubricants are synthetic, a key benefit to using our base stocks because they can be controlled and varied to achieve a level of performance not possible with natural oils and lubricants.
UCON™ 50-HB-5100
UCON™ 50-HB-5100 is a polyalkylene glycol (PAG) that is sold as a base stock for your formulation. UCON fluids and lubricants are synthetic, a key benefit to using our base stocks because they can be controlled and varied to achieve a level of performance not possible with natural oils and lubricants.
UCON™ 50-HB-55
UCON™ 50-HB-55 is a polyalkylene glycol (PAG) that is sold as a base stock for your formulation. UCON fluids and lubricants are synthetic, a key benefit to using our base stocks because they can be controlled and varied to achieve a level of performance not possible with natural oils and lubricants.
UCON™ 50-HB-660
UCON™ 50-HB-660 is a polyalkylene glycol (PAG) that is sold as a base stock for your formulation. UCON fluids and lubricants are synthetic, a key benefit to using our base stocks because they can be controlled and varied to achieve a level of performance not possible with natural oils and lubricants.
UCON™ 75-H-1400
UCON™ 75-H-1400 is a polyalkylene glycol (PAG) that is sold as a base stock for your formulation. UCON fluids and lubricants are synthetic, a key benefit to using our base stocks because they can be controlled and varied to achieve a level of performance not possible with natural oils and lubricants.
UCON™ 75-H-450
UCON™ 75-H-450 is a polyalkylene glycol (PAG) that is sold as a base stock for your formulation. UCON fluids and lubricants are synthetic, a key benefit to using our base stocks because they can be controlled and varied to achieve a level of performance not possible with natural oils and lubricants.
UCON™ 75-H-90000
UCON™ 75-H-90000 is a polyalkylene glycol (PAG) that is sold as a base stock for your formulation. UCON fluids and lubricants are synthetic, a key benefit to using our base stocks because they can be controlled and varied to achieve a level of performance not possible with natural oils and lubricants.
UCON™ 75-H-9500
UCON™ 75-H-9500 is a polyalkylene glycol (PAG) that is sold as a base stock for your formulation. UCON fluids and lubricants are synthetic, a key benefit to using our base stocks because they can be controlled and varied to achieve a level of performance not possible with natural oils and lubricants.
UCON™ EPML X
UCON™ EPML X provides extreme pressure lubrication in synthetic metalworking fluid formulations.
UCON™ EPML X 483
UCON™ EPML X 483 provides extreme pressure lubrication in synthetic metalworking fluid formulations.
UCON™ EPML X 577
UCON™ EPML X 577 provides extreme pressure lubrication in synthetic metalworking fluid formulations.
UCON™ EPML-483
UCON™ EPML-483 provides extreme pressure lubrication in synthetic metalworking fluid formulations.
UCON™ EPML-577
UCON™ EPML-577 provides extreme pressure lubrication in synthetic metalworking fluid formulations.
UCON™ Hydraulic Fluid FDC-300
UCON™ Hydraulic Fluid FDC-300 is a fully formulated, extreme-pressure lubricant developed for use in industrial machinery where incidental food contact from lubricants may occur.
UCON™ LB-1145
UCON™ LB-1145 is a polyalkylene glycol (PAG) that is sold as a base stock for your formulation. UCON fluids and lubricants are synthetic, a key benefit to using our base stocks because they can be controlled and varied to achieve a level of performance not possible with natural oils and lubricants.
UCON™ LB-135
UCON™ LB-135 is a polyalkylene glycol (PAG) that is sold as a base stock for your formulation. UCON fluids and lubricants are synthetic, a key benefit to using our base stocks because they can be controlled and varied to achieve a level of performance not possible with natural oils and lubricants.
UCON™ LB-165
UCON™ LB-165 is a polyalkylene glycol (PAG) that is sold as a base stock for your formulation. UCON fluids and lubricants are synthetic, a key benefit to using our base stocks because they can be controlled and varied to achieve a level of performance not possible with natural oils and lubricants.
UCON™ LB-170-X
UCON™ LB-170-X is formulated with an antioxidant for improved high temperature performance. If an application requires enhanced oxidative stability, this fluid is an excellent candidate.
UCON™ LB-1715
UCON™ LB-1715 is a polyalkylene glycol (PAG) that is sold as a base stock for your formulation. UCON fluids and lubricants are synthetic, a key benefit to using our base stocks because they can be controlled and varied to achieve a level of performance not possible with natural oils and lubricants.
UCON™ LB-285
UCON™ LB-285 is a polyalkylene glycol (PAG) that is sold as a base stock for your formulation. UCON fluids and lubricants are synthetic, a key benefit to using our base stocks because they can be controlled and varied to achieve a level of performance not possible with natural oils and lubricants.
UCON™ LB-300-X
UCON™ LB-300-X is formulated with an antioxidant for improved high temperature performance. If an application requires enhanced oxidative stability, this fluid is an excellent candidate.
UCON™ LB-300-XY26
UCON™ LB-300-XY26 is a polyalkylene glycol (PAG) base stock formulated with additives for iron and copper corrosion protection and high temperature use.
UCON™ LB-385
UCON™ LB-385 is a polyalkylene glycol (PAG) that is sold as a base stock for your formulation. UCON fluids and lubricants are synthetic, a key benefit to using our base stocks because they can be controlled and varied to achieve a level of performance not possible with natural oils and lubricants.
UCON™ LB-525
UCON™ LB-525 is a polyalkylene glycol (PAG) that is sold as a base stock for your formulation. UCON fluids and lubricants are synthetic, a key benefit to using our base stocks because they can be controlled and varied to achieve a level of performance not possible with natural oils and lubricants.
UCON™ LB-625
UCON™ LB-625 is a polyalkylene glycol (PAG) that is sold as a base stock for your formulation. UCON fluids and lubricants are synthetic, a key benefit to using our base stocks because they can be controlled and varied to achieve a level of performance not possible with natural oils and lubricants.
UCON™ LB-65
UCON™ LB-65 is a polyalkylene glycol (PAG) that is sold as a base stock for your formulation. UCON fluids and lubricants are synthetic, a key benefit to using our base stocks because they can be controlled and varied to achieve a level of performance not possible with natural oils and lubricants.
UCON™ LB-650-X
UCON™ LB-650-X is formulated with an antioxidant for improved high temperature performance. If an application requires enhanced oxidative stability, this fluid is an excellent candidate.
UCON™ OSP-150
UCON™ OSP-150 is an oil-soluble polyalkylene glycol (PAG).
UCON™ OSP-18
UCON™ OSP-18 is an oil-soluble polyalkylene glycol (PAG).
UCON™ OSP-220
UCON™ OSP-220 is an oil-soluble polyalkylene glycol (PAG).
UCON™ OSP-32
UCON™ OSP-32 is an oil-soluble polyalkylene glycol (PAG).
UCON™ OSP-320
UCON™ OSP-320 is an oil-soluble polyalkylene glycol (PAG).
UCON™ OSP-46
UCON™ OSP-46 is an oil-soluble polyalkylene glycol (PAG).
UCON™ OSP-460
UCON™ OSP-460 is an oil-soluble polyalkylene glycol (PAG).
UCON™ OSP-68
UCON™ OSP-68 is an oil-soluble polyalkylene glycol (PAG).
UCON™ OSP-680
UCON™ OSP-680 is an oil-soluble polyalkylene glycol (PAG).
UCON™ PE-320
UCON™ PE-320 is a high-performing polyalkylene glycol lubricant which is compatible with all compressor types and approved by vehicle manufacturers worldwide.
UCON™ Quenchant A
UCON™ Quenchant A is a nonflammable, aqueous solution containing special polymers and corrosion inhibitors for quenching ferrous and nonferrous metals. It can replace water, oil, or brine solutions and is the preferred quenching media for both low- and high-hardenability, plain carbon, and alloy steels.
UCON™ Quenchant A-NN
UCON™ Quenchant A-NN is a nonflammable, aqueous solution containing special polymers and corrosion inhibitors for quenching ferrous and nonferrous metals. It can replace water, oil, or brine solutions and is the preferred quenching media for both low- and high-hardenability, plain carbon, and alloy steels.
UCON™ Quenchant E
UCON™ Quenchant E is a nonflammable, aqueous solution containing special polymers and corrosion inhibitors for quenching ferrous and nonferrous metals. It can replace water, oil, or brine solutions and is the preferred quenching media for both low- and high-hardenability, plain carbon, and alloy steels.
UCON™ Quenchant E-NN
UCON™ Quenchant E-NN is a nonflammable, aqueous solution containing special polymers and corrosion inhibitors for quenching ferrous and nonferrous metals. It can replace water, oil, or brine solutions and is the preferred quenching media for both low- and high-hardenability, plain carbon, and alloy steels.
UCON™ Quenchant HT
UCON™ Quenchant HT is a nonflammable, aqueous solution containing special polymers and corrosion inhibitors for quenching ferrous and nonferrous metals. It can replace water, oil, or brine solutions and is the preferred quenching media for both low- and high-hardenability, plain carbon, and alloy steels.
UCON™ Quenchant RL
UCON™ Quenchant RL is a nonflammable, aqueous solution containing special polymers and corrosion inhibitors for quenching ferrous and nonferrous metals. It can replace water, oil, or brine solutions and is the preferred quenching media for both low- and high-hardenability, plain carbon, and alloy steels.
