Home / Graphic Arts & Inks / Suppliers / Zhejiang Chembest United Industrial Co., Ltd.

Graphic Arts & Inks

Zhejiang Chembest United Industrial Co., Ltd.

Zhejiang Chembest United Industrial Co., Ltd. lists 113 grades in Graphic Arts & Inks. The sheets saved on this site are below.

Listed grades113
Sheets here113
Formulas here0
GRAPHIC ARTS & INKS SUPPLIER Zhejiang Chembest United Industrial Co., Ltd.

Grades from Zhejiang Chembest United Industrial Co., Ltd.

Bronze Red C

ingredients

Bronze Red C, in the form of a yellowish red powder, is a dye in the mono azo chemical family. This product can be used in water based inks, offset inks, and in plastic applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0.

Bronze Red C-P

ingredients

Bronze Red C-P, in the form of a yellowish red powder, is a dye in the mono azo chemical family. This product can be used in offset ink applications and in plastic. Its density is 1.8 and its pH value exists between 7.0 and 8.0.

Bronze Red C-S

ingredients

Bronze Red C-S, in the form of a yellowish red powder, is a dye in the mono azo chemical family. This product can be used in nitrocellulose inks, offset inks, polyamide inks, and in polypropylene ink applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0.

Bronze Red C-W

ingredients

Bronze Red C-W, in the form of a yellowish red powder, is a dye in the mono azo chemical family. This product can be used in water-based inks and in offset ink applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0.

Chrome Titanate Brown

ingredients

Chrome Titanate Brown, in the form of a yellowish brown powder, is an inorganic dye. This product is non-toxic, weather-resistant, and acid-resistant. It can be used in heat-reflective coatings and inks.

Copper Chromite Black

ingredients

Copper Chromite Black, in the form of a bluish-black powder, is an inorganic dye. This product is heat-resistant, alkali-resistant, and acid resistant. It can be used in heat-resistant coatings, coil coatings, and high-temperature glass inks.

Deep Chrome Yellow 805

ingredients

Deep Chrome Yellow 805, in the form of a yellow powder, is an inorganic dye. This product can be used in solvent-based paints, solvent-based inks, and in offset ink applications. Its pH value exists between 4.0 and 8.0.

Fast Blue B

ingredients

Fast Blue B, in the form of a reddish blue powder, is a dye in the copper phthalocyanine chemical family. This product can be used in offset inks, water-based inks, industrial paints, textile printing, and plastic applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0.

Fast Blue BGNCF

ingredients

Fast Blue BGNCF, in the form of a reddish blue powder, is a dye in the copper phthalocyanine chemical family. This product can be used in offset inks, water-based inks, industrial paints, textile printing, and plastic applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0.

Fast Blue BGS

ingredients

Fast Blue BGS, in the form of a reddish blue powder, is a dye in the copper phthalocyanine chemical family. This product can be used in offset inks, water-based inks, industrial paints, textile printing, and in plastic applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0.

Fast Blue BS

ingredients

Fast Blue BS, in the form of a reddish blue powder, is a dye in the copper phthalocyanine chemical family. This product can be used in offset inks, water-based inks, industrial paints, plastics, and in textile printing applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0.

Fast Blue Lake BO

ingredients

Fast Blue Lake BO, in the form of a bluish violet powder, is a dye in the triphenylmethane chemical family. This product can be used in offset inks and in water-based ink applications. Its density is 1.6 and its pH value exists between 7.0 and 8.0.

Fast Blue Toner

ingredients

Fast Blue Toner, in the form of a bluish violet powder, is a dye in the triphenylmethane chemical family. This product can be used in offset inks and in water-based ink applications. Its density is 1.5 and its pH value exists between 7.0 and 8.0.

Fast Green G

ingredients

Fast Green G, in the form of a reddish blue powder, is a dye in the copper phthalocyanine chemical family. This product can be used in offset inks, water-based inks, industrial paints, textile printing applications, and in plastics. Its density is 1.8 and its pH value exists between 7.0 and 8.0.

Fast Orange G

ingredients

Fast Orange G, in the form of a reddish yellow powder, is a dye in the diazo chemical family. This product can be used in water-based inks, textile printing, offset inks, nitrocellulose inks, and in plastics.

Fast Orange RL

ingredients

Fast Orange RL, in the form of a reddish yellow powder, is a dye in the azo chemical family. This product can be used in water-based inks, textile printing, and in plastic applications. Its density is 1.6 and its pH value exists between 6.0 and 7.0.

Fast Pink Lake

ingredients

Fast Pink Lake, in the form of a bluish red powder, is a dye in the xanthene chemical family. This product can be used in offset ink applications. Its density is 1.6 and its pH value exists between 6.5 and 7.5.

Fast Pink Toner

ingredients

Fast Pink Toner, in the form of a bluish red powder, is a dye in the xanthene chemical family. This product can be used in offset ink applications. Its density is 1.5 and its pH value exists between 6.5 and 7.5.

Fast Pink Toner NC

ingredients

Fast Pink Toner NC, in the form of a bluish red powder, is a dye in the xanthene chemical family. This product can be used in nitrocellulose inks, polyamide inks, and polypropylene ink applications. Its density is 1.5 and its pH value exists between 6.5 and 7.5.

Fast Pink Toner W

ingredients

Fast Pink Toner W, in the form of a bluish red powder, is a dye in the xanthene chemical family. This product can be used in water-based ink applications. Its density is 1.5 and its pH value exists between 6.5 and 7.5.

Fast Red 2R

ingredients

Fast Red 2R, in the form of a yellowish red powder, is a dye in the mono azo chemical family. This product can be used in water-based inks and in industrial paint applications. Its density is 1.5 and its pH value exists between 6.0 and 7.0.

Fast Red BBC

ingredients

Fast Red BBC, in the form of a bluish red powder, is a dye in the mono azo chemical family. This product can be used in industrial paints and plastic applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0.

Fast Red BBC-S

ingredients

Fast Red BBC-S, in the form of a bluish red powder, is a dye in the mono azo chemical family. This product can be used in nitrocellulose inks, polyamide inks, and polypropylene ink applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0.

Fast Red BBM

ingredients

Fast Red BBM, in the form of a bluish red powder, is a dye in the mono azo chemical family. This product can be used in industrial paint applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0.

Fast Red BBN

ingredients

Fast Red BBN, in the form of a yellowish red powder, is a dye in the mono azo chemical family. This product can be used in offset inks and in plastic applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0.

Fast Red BBN-W

ingredients

Fast Red BBN-W, in the form of a yellowish red powder, is a dye in the mono azo chemical family. This product can be used in water-based inks and in offset ink applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0.

Fast Red BBS-W

ingredients

Fast Red BBS-W, in the form of a red powder, is a dye in the mono azo chemical family. This product can be used in water-based inks and in offset ink applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0.

Fast Red F2R

ingredients

Fast Red F2R, in the appearance of a yellowish red powder, is a dye in the mono azo chemical family. This product can be used in water-based inks and in textile printing applications. Its density is 1.5 and its pH value exists between 6.5 and 7.5.

Fast Red F4R

ingredients

Fast Red F4R, in the form of a bluish red powder, is a dye in the mono azo chemical family. This product can be used in water-based inks and in textile printing applications. Its density is 1.5 and its pH value exists between 6.5 and 7.5.

Fast Red FBB

ingredients

Fast Red FBB, in the form of a bright red powder, is a dye in the mono azo chemical family. This product can be used in offset inks, water-based inks, plastic applications, and in textile printing. Its density is 1.6 and its pH value exists between 6.0 and 7.0.

Fast Red FGR

ingredients

Fast Red FGR, in the form of a bright red powder, is a dye in the mono azo chemical family. This product can be used in water-based inks, textile printing, industrial paints, and air-drying paint applications. Its density is 1.5 and is pH value exists between 6.0 and 7.0.

Fast Red N

ingredients

Fast Red N, in the form of a yellowish red powder, is a dye in the mono azo chemical family. This product can be used in water-based inks and in textile printing applications. Its density is 1.5 and its pH value exists between 6.0 and 7.0.

Fast Red W

ingredients

Fast Red W, in the form of a bluish red powder, is a dye in the xanthene chemical family. This product can be used in water-based inks and in offset ink applications. Its density is 1.6 and its pH value exists between 7.0 and 8.0.

Fast Rose Lake

ingredients

Fast Rose Lake, in the form of a reddish violet powder, is a dye in the rhodamine chemical family. This product can be used in offset inks, water-based inks, and polyamide inks. Its density is 1.8 and its pH value exists between 7.0 and 8.0.

Fast Rose Toner

ingredients

Fast Rose Toner, in the form of a reddish violet powder, is a dye in the rhodamine chemical family. This product can be used in offset ink applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0.

Fast Violet Lake

ingredients

Fast Violet Lake, in the form of a bluish violet powder, is a dye in the triphenylmethane chemical family. This product can be used in offset ink applications. Its density is 1.6 and its pH value exists between 7.0 and 8.0.

Fast Violet RL

ingredients

Fast Violet RL, in the form of a bluish violet powder, is a dye in the dioxazine chemical family. This product can be used in water-based inks, industrial paints, water-based coatings, automotive paints, textile printing applications, and in plastics. Its density is 1.6 and its pH value exists between 5.0 and 6.0.

Fast Violet Toner

ingredients

Fast Violet Toner, in the form of a bluish violet powder, is a dye in the triphenylmethane chemical family. This product can be used in offset inks and in water-based ink applications. Its density is 1.6 and its pH value exists between 7.0 and 8.0.

Fast Violet Toner NC

ingredients

Fast Violet Toner NC, in the form of a bluish violet powder, is a dye in the triphenylmethane chemical family. This product can be used in nitrocellulose inks, polyamide inks, and in polypropylene ink applications. Its density is 1.6 and its pH value exists between 7.0 and 8.0.

Fast Violet Toner W

ingredients

Fast Violet Toner W, in the form of a bluish violet powder, is a dye in the triphenylmethane chemical family. This product can be used in water-based inks and in offset ink applications. Its density is 1.6 and its pH value exists between 7.0 and 8.0.

Fast Violet W

ingredients

Fast Violet W, in the form of a bluish violet powder, is a dye in the triphenylmethane chemical family. This product can be used in water-based inks and in offset ink applications. Its density is 1.6 and its pH value exists between 7.0 and 8.0.

Fast Yellow 10G

ingredients

Fast Yellow 10G, in the form of a greenish yellow powder, is a dye in the mono azo chemical family. This product can be used in air drying paints, offset inks, industrial paints, and water-based coating applications. Its density is 1.6 and its pH value exists between 6.0 and 7.0.

Fast Yellow G

ingredients

Fast Yellow G, in the form of a bright yellow powder, is a dye in the mono azo chemical family. This product can be used in air drying paints, offset inks, industrial paints, and in water-based coating applications. Its density is 1.6 and its pH value exists between 6.0 and 7.0.

Hydroxypropyl Cellulose (HPC)

ingredients

Hydroxypropyl Cellulose, in the form of a viscous fluid, is an organic additive. This product can be used in tablet coatings, inks, and varnishes. Its pH exists between 5.0 and 7.5.

KH180

ingredients

KH180, in the form of a powder, is a hydroxyethyl cellulose non-ionic surfactant. This product is soluble in both hot and cold water. It can be used in water-based latex paints and ink chemicals.

KH250

ingredients

KH250, in the form of a powder, is a hydroxyethyl cellulose non-ionic surfactant. This product is soluble in both hot and cold water. It can be used in water-based latex paints and ink chemicals.

KH300

ingredients

KH300, in the form of a powder, is a hydroxyethyl cellulose non-ionic surfactant. This product is soluble in both hot and cold water. It can be used in water-based latex paints and ink chemicals.

Lemon Chrome Yellow 501

ingredients

Lemon Chrome Yellow 501, in the form of a yellow powder, is an inorganic dye. This product can be used in solvent-based paints, solvent-based inks, and in offset ink applications. Its pH value exists between 4.0 and 7.0.

Lithol Carmine H300

ingredients

Lithol Carmine H300, in the form of a bluish red powder, is a dye in the mono azo chemical family. This product can be used in polyamide inks, toluene-based inks, polypropylene inks, and in industrial paint applications. Its density is 1.7 and its pH value exists between 7.0 and 8.0.

Lithol Carmine H4B01

ingredients

Lithol Carmine H4B01, in the form of a bluish red powder, is a dye in the mono azo chemical family. This product can be used in toluene-based inks, offset inks, and in nitrocellulose ink applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0.

Lithol Carmine H4BL

ingredients

Lithol Carmine H4BL, in the form of a bluish red powder, is a dye in the mono azo chemical family. This product can be used in toluene-based inks, offset inks, and nitrocellulose ink applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0.

Lithol Carmine H4GL

ingredients

Lithol Carmine H4GL, in the form of a bluish red powder, is a dye in the mono azo chemical family. This product can be used in nitrocellulose inks, polyamide inks, and in polypropylene ink applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0.

Lithol Carmine HA

ingredients

Lithol Carmine HA, in the form of a bluish red powder, is a dye in the mono azo chemical family. This product can be used in offset inks and in toluene-based ink applications. Its density is 1.7 and its pH value exists between 7.0 and 8.0.

Lithol Carmine HB

ingredients

Lithol Carmine HB, in the form of a bluish red powder, is a dye in the mono azo chemical family. This product can be used in offset inks and in toluene-based ink applications. Its density is 1.7 and its pH value exists between 7.0 and 8.0.

Lithol Dark Red W

ingredients

Lithol Dark Red W, in the form of a bluish red powder, is a dye in the mono azo chemical family. This product can be used in water-based ink and in industrial paint applications. Its density is 1.8 and its pH exists between 6.5 and 7.5.

Lithol Red R

ingredients

Lithol Red R, in the form of a red powder, is a dye in the mono azo chemical family. This product can be used in offset inks, water-based inks, and in industrial paint applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0.

Lithol Red R-W

ingredients

Lithol Red R-W, in the form of a red powder, is a dye in the mono azo chemical family. This product can be used in water-based ink applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0.

Medium Chrome Yellow 103

ingredients

Medium Chrome Yellow 103, in the form of a yellow powder, is an inorganic pigment. This product can be used in solvent-based paints, solvent-based inks, offset inks, and in plastics. Its pH value exists between 5.0 and 8.0.

Medium Chrome Yellow 105

ingredients

Medium Chrome Yellow 105, in the form of a yellow powder, is an inorganic dye. This product can be used in solvent-based paints, solvent-based inks, and in offset ink applications. Its pH value exists between 5.0 and 8.0.

Methyl Hydroxyethyl Cellulose (MHEC)

ingredients

Methyl Hydroxyethyl Cellulose (MHEC), in the form of a powder, is a thickening agent. This product can be used in water-based latex paints and printing inks. Its pH value exists between 5.0 and 8.0.

Milori Blue

ingredients

Milori Blue, in the form of a bright greenish blue powder, is an inorganic pigment. This product can be used in offset inks, water-based inks, and in plastic applications. Its bulk density is .5 g/ml and its pH value exists between 4.5 and 7.0.

Molybdate Chrome Red 107

ingredients

Molybdate Chrome Red 107, in the form of a red powder, is an inorganic dye. This product can be used in solvent-based paints, solvent-based inks, and in offset inks. Is pH value exists between 4.0 and 8.0.

Molybdate Chrome Red 210

ingredients

Molybdate Chrome Red 210, in the form of a red powder, is an inorganic dye. This product can be used in solvent-based paints, solvent-based inks, and in offset ink applications. Its pH value exists between 5.0 and 8.0.

N110

ingredients

N110 is a carbon black powder, which is derived from incompletely heating a petroleum source until it turns into powder. This product has high reinforcing performance, abrasion resistance, and high stress at definite elongation. It can be used in inks, coatings, dyeing and printing applications, and in rubber products.

N115

ingredients

N115 is a carbon black powder, which is derived from incompletely heating a petroleum source until it turns into powder. This product has high reinforcing performance, abrasion resistance, and high stress at definite elongation. It can be used in inks, coatings, dyeing and printing applications, and in rubber products.

N120

ingredients

N120 is a carbon black powder, which is derived from incompletely heating a petroleum source until it turns into powder. This product has high reinforcing performance, abrasion resistance, and high stress at definite elongation. It can be used in inks, coatings, dyeing and printing applications, and in rubber products.

N121

ingredients

N121 is a carbon black powder, which is derived from incompletely heating a petroleum source until it turns into powder. This product has high reinforcing performance, abrasion resistance, and high stress at definite elongation. It can be used in inks, coatings, dyeing and printing applications, and in rubber products.

N125

ingredients

N125 is a carbon black powder, which is derived from incompletely heating a petroleum source until it turns into powder. This product has high reinforcing performance, abrasion resistance, and high stress at definite elongation. It can be used in inks, coatings, dyeing and printing applications, and in rubber products.

N134

ingredients

N134 is a carbon black powder, which is derived from incompletely heating a petroleum source until it turns into powder. This product has high reinforcing performance, abrasion resistance, and high stress at definite elongation. It can be used in inks, coatings, dyeing and printing applications, and in rubber products.

N135

ingredients

N135 is a carbon black powder, which is derived from incompletely heating a petroleum source until it turns into powder. This product has high reinforcing performance, abrasion resistance, and high stress at definite elongation. It can be used in inks, coatings, dyeing and printing applications, and in rubber products.

N219

ingredients

N219 is a carbon black powder, which is derived from incompletely heating a petroleum source until it turns into powder. This product has high reinforcing performance, abrasion resistance, and high stress at definite elongation. It can be used in inks, coatings, dyeing and printing applications, and in rubber products.

N220

ingredients

N220 is a carbon black powder, which is derived from incompletely heating a petroleum source until it turns into powder. This product has high reinforcing performance, abrasion resistance, and high stress at definite elongation. It can be used in inks, coatings, dyeing and printing applications, and in rubber products.

N231

ingredients

N231 is a carbon black powder, which is derived from incompletely heating a petroleum source until it turns into powder. This product has high reinforcing performance, abrasion resistance, and high stress at definite elongation. It can be used in inks, coatings, dyeing and printing applications, and in rubber products.

N234

ingredients

N234 is a carbon black powder, which is derived from incompletely heating a petroleum source until it turns into powder. This product has high reinforcing performance, abrasion resistance, and high stress at definite elongation. It can be used in inks, coatings, dyeing and printing applications, and in rubber products.

N293

ingredients

N293 is a carbon black powder, which is derived from incompletely heating a petroleum source until it turns into powder. This product has high reinforcing performance, abrasion resistance, and high stress at definite elongation. It can be used in inks, coatings, dyeing and printing applications, and in rubber products.

N299

ingredients

N299 is a carbon black powder, which is derived from incompletely heating a petroleum source until it turns into powder. This product has high reinforcing performance, abrasion resistance, and high stress at definite elongation. It can be used in inks, coatings, dyeing and printing applications, and in rubber products.

N326

ingredients

N326 is a carbon black powder, which is derived from incompletely heating a petroleum source until it turns into powder. This product has high reinforcing performance, abrasion resistance, and high stress at definite elongation. It can be used in inks, coatings, dyeing and printing applications, and in rubber products.

N330

ingredients

N330 is a carbon black powder, which is derived from incompletely heating a petroleum source until it turns into powder. This product has high reinforcing performance, abrasion resistance, and high stress at definite elongation. It can be used in inks, coatings, dyeing and printing applications, and in rubber products.

N335

ingredients

N335 is a carbon black powder, which is derived from incompletely heating a petroleum source until it turns into powder. This product has high reinforcing performance, abrasion resistance, and high stress at definite elongation. It can be used in inks, coatings, dyeing and printing applications, and in rubber products.

N339

ingredients

N339 is a carbon black powder, which is derived from incompletely heating a petroleum source until it turns into powder. This product has high reinforcing performance, abrasion resistance, and high stress at definite elongation. It can be used in inks, coatings, dyeing and printing applications, and in rubber products.

N343

ingredients

N343 is a carbon black powder, which is derived from incompletely heating a petroleum source until it turns into powder. This product has high reinforcing performance, abrasion resistance, and high stress at definite elongation. It can be used in inks, coatings, dyeing and printing applications, and in rubber products.

N347

ingredients

N347 is a carbon black powder, which is derived from incompletely heating a petroleum source until it turns into powder. This product has high reinforcing performance, abrasion resistance, and high stress at definite elongation. It can be used in inks, coatings, dyeing and printing applications, and in rubber products.

N351

ingredients

N351 is a carbon black powder, which is derived from incompletely heating a petroleum source until it turns into powder. This product has high reinforcing performance, abrasion resistance, and high stress at definite elongation. It can be used in inks, coatings, dyeing and printing applications, and in rubber products.

N356

ingredients

N356 is a carbon black powder, which is derived from incompletely heating a petroleum source until it turns into powder. This product has high reinforcing performance, abrasion resistance, and high stress at definite elongation. It can be used in inks, coatings, dyeing and printing applications, and in rubber products.

N358

ingredients

N358 is a carbon black powder, which is derived from incompletely heating a petroleum source until it turns into powder. This product has high reinforcing performance, abrasion resistance, and high stress at definite elongation. It can be used in inks, coatings, dyeing and printing applications, and in rubber products.

N375

ingredients

N375 is a carbon black powder, which is derived from incompletely heating a petroleum source until it turns into powder. This product has high reinforcing performance, abrasion resistance, and high stress at definite elongation. It can be used in inks, coatings, dyeing and printing applications, and in rubber products.

Nickel Titanate Yellow

ingredients

Nickel Titanate Yellow, in the form of a greenish yellow powder, is an inorganic dye. This product is weather- and acid-resistant. It can be used in heat-reflective coatings and in inks.

Permanent Yellow 1301

ingredients

Permanent Yellow 1301, in the form of a transparent, reddish yellow, low viscosity fluid, is a dye in the diazo chemical family. This product can be used in polyamide inks, nitrocellulose inks, offset inks, and in polypropylene ink applications. Its density is 1.6 and its pH value exists between 6.0 and 7.0.

Permanent Yellow 1401

ingredients

Permanent Yellow 1401, in the form of a bright yellow powder, is a dye in the diazo chemical family. This product can be used in polyamide inks, nitrocellulose inks, and in polypropylene ink applications. Its density is 1.6 and its pH value exists between 6.0 and 7.0.

Permanent Yellow 2G

ingredients

Permanent Yellow 2G, in the form of a transparent, greenish yellow powder, is a dye in the diazo chemical family. This product can be used in offset inks and in plastic applications. Its density is 1.6 and its pH value exists between 6.0 and 7.0.

Permanent Yellow 2GS

ingredients

Permanent Yellow 2GS, in the form of a greenish yellow powder, is a dye in the diazo chemical family. This product can be used in offset inks, water-based inks, textile printing, and in plastic applications. Its density is 1.6 and its pH value exists between 6.0 and 7.0.

Permanent Yellow 5GX

ingredients

Permanent Yellow 5GX, in the form of a bright yellow powder, is a dye in the mono azo chemical family. This product can be used in industrial paints, water-based paints, and in water-based inks. Its density is 1.6 and its pH value exists between 6.0 and 7.0.

Permanent Yellow 5GX-S

ingredients

Permanent Yellow 5GX-S, in the form of a bright yellow powder, is a dye in the mono azo chemical family. This product can be used in solvent-based inks and in water-based paint applications. Its density is 1.6 and its pH value exists between 6.0 and 7.0.

Permanent Yellow 8301

ingredients

Permanent Yellow 8301, in the form of a transparent, reddish yellow powder, is a dye in the diazo chemical family. This product can be used in polyamide inks, polypropylene inks, nitrocellulose inks, and in plastic applications. Its density is 1.7 and its pH value exists between 6.0 and 7.0.

Permanent Yellow G-W

ingredients

Permanent Yellow G-W, in the form of a bright yellow powder, is a dye in the diazo chemical family. This product can be used in water-based inks and in textile printing applications. Its density is 1.6 and its pH value exists between 6.0 and 7.0.

Permanent Yellow GR

ingredients

Permanent Yellow GR, in the form of a semi-transparent, reddish yellow powder, is a dye in the diazo chemical family. This product can be used in offset inks, water-based inks, textile printing, and in plastic applications. Its density is 1.5 and its pH value exists between 6.0 and 7.0.

Permanent Yellow HR-A

ingredients

Permanent Yellow HR-A, in the form of a transparent, reddish yellow powder, is a dye in the diazo chemical family. This product can be used in offset inks, industrial paints, water-based inks, and in plastic applications. Its density is 1.7 and its pH value exists between 6.0 and 7.0.

Rubine 4B

ingredients

Rubine 4B, in the form of a bluish red powder, is a dye in the mono azo chemical family. This product can be used in offset inks and in plastic applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0.

Rubine 4B341

ingredients

Rubine 4B341, in the form of a bluish red powder, is a dye in the mono azo chemical family. This product can be used in offset ink applications. Its density is 1.7 and its pH value exists between 7.0 and 8.0.

Rubine 8B

ingredients

Rubine 8B, in the form of a bluish red powder, is a dye in the mono azo chemical family. This product can be used in offset inks and in plastic applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0.

Rubine 9B

ingredients

Rubine 9B, in the form of a bluish red powder, is a dye in the mono azo chemical family. This product can be used in offset inks and in plastic applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0.

Rubine A6B

ingredients

Rubine A6B, in the form of a bluish red powder, is a dye in the mono azo chemical family. This product can be used in offset inks and in plastic applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0.

Rubine BK

ingredients

Rubine BK, in the form of a bluish red powder, is a dye in the mono azo chemical family. This product can be used in offset inks and in plastic applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0.

Rubine BK-S

ingredients

Rubine BK-S, in the form of a bluish red powder, is a dye in the mono azo chemical family. This product can be used in nitrocellulose inks, polyamide inks, and in polypropylene ink applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0.

Rubine BK-W

ingredients

Rubine BK-W, in the form of a bluish red powder, is a dye in the mono azo chemical family. This product can be used in water-based inks and in offset ink applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0.

ATR-312

ingredients

ATR-312 is a rutile titanium dioxide pigment. This product appears as a white powder that has been treated with aluminum and silicon compounds. It can be used in paints, coatings, printing inks, decorative materials, plastics, and in rubber applications.

Benzidine Yellow 121H

ingredients

Benzidine Yellow 121H, in the form of a bright yellow powder, is a dye that can be used in polyamide inks, nitrocellulose inks, polypropylene inks, and in toluene-based inks. Its density is 1.5 and its pH value exists between 6.0 and 7.0.

Benzidine Yellow DHG

ingredients

Benzidine Yellow DHG, in the form of a bright yellow powder, is a dye in the diazo chemical family. This product can be used in offset inks and in textile printing applications. Its density is 1.5 and its pH value exists between 6.0 and 7.0.

Benzidine Yellow G

ingredients

Benzidine Yellow G, in the form of a transparent, reddish yellow powder, is a dye in the diazo chemical family. This product can be used in offset inks, water-based inks, textile printing, and in plastic applications. Its density is 1.5 and its pH value exists between 6.0 and 7.0.

Benzidine Yellow G-A

ingredients

Benzidine Yellow G-A, in the form of a reddish yellow powder, is a dye in the diazo chemical family. This product can be used in offset inks, water-based inks, textile printing and in plastic applications. Its density is 1.5 and its pH value exists between 6.0 and 7.0.

Benzidine Yellow G-B

ingredients

Benzidine Yellow G-B, in the form of a semi-transparent greenish yellow powder, is a dye in the diazo chemical family. This product can be sued in offset inks, water-based inks, textile printing, and in plastic applications. Its density is 1.5 and its pH value exists between 6.0 and 7.0.

Toluidine Red RN

ingredients

Toluidine Red RN, in the form of a yellowish-red powder, is a dye in the mono azo chemical family. This product can be used in industrial or water based paint applications. Its density is 1.5 and its pH value exists between 6.5 and 7.5.

Violet 2

ingredients

Violet 2, in the form of a reddish violet powder, is a dye in the rhodamine chemical family. This product can be used in water-based inks. Its density is 1.6 and its pH value exists between 7.0 and 8.0.

FOR MATERIAL SUPPLIERS

Put your materials in front of formulators.

Give product developers the specs, certifications, and sample path they need to shortlist your grades.

Talk to our team
Formulation scientist ready to help suppliers reach product developers