Home / Graphic Arts & Inks / Suppliers / Metapol
Graphic Arts & Inks
Metapol
Metapol lists 137 grades in Graphic Arts & Inks. The sheets saved on this site are below.
Grades from Metapol
CD 008
CD 008, in the form of a particle-sized flake, is a non-leafing aluminum pigment in a dispersion of resin, aliphatic solvents, and aromatic solvents that can be used in industrial coatings, hammerfinish coatings, aerosols, and polychrome finishes. This product's average particle size ranges between 7.8-9.5 um.
CD 010
CD 010, in the form of a particle-sized flake, is a non-leafing aluminum pigment in a dispersion of resin, aliphatic solvents, and aromatic solvents that can be used in industrial coatings, hammerfinish coatings, aerosols, and polychrome finishes. This product's average particle size ranges between 9.8-12 um.
CD 017
CD 017, in the form of a particle-sized flake, is a non-leafing aluminum pigment in a dispersion of resin, aliphatic solvents, and aromatic solvents that can be used in industrial coatings, hammerfinish coatings, aerosols, and polychrome finishes. This product's average particle size ranges between 17-18 um.
CD 025
CD 025, in the form of a particle-sized flake, is a non-leafing aluminum pigment in a dispersion of resin, aliphatic solvents, and aromatic solvents that can be used in industrial coatings, hammerfinish coatings, aerosols, and polychrome finishes. This product's average particle size ranges between 20-24 um.
CD 1525
CD 1525, in the form of a particle-sized flake, is a leafing aluminum pigment in a dispersion of resin, aliphatic solvents, and aromatic solvents that can be used in decorative coatings, industrial coatings, aerosols, roof coatings, and reflective paints. This product's average particle size ranges between 20-24 um.
CD 1525 WH
CD 1525 WH, in the form of a particle-sized flake, is an aluminum pigment in a water based paste that can be used in craft coatings, decorative coatings, and textile printing applications. This product has been stabilized with additives, water-miscible solvents, and an emulsifier and is designed for neutral or slightly basic systems. Its average particle diameter ranges between 20-24 um.
CD 1917
CD 1917, in the form of a particle-sized flake, is a leafing aluminum pigment in a dispersion of resin, aliphatic solvents, and aromatic solvents that can be used in decorative coatings, industrial coatings, aerosols, roof coatings, and reflective coatings. This product's average particle size ranges between 17-18 um.
CD 1917 WH
CD 1917 WH, in the form of a particle-sized flake, is an aluminum pigment in a water-based paint that can be used in craft coatings, school coatings, and textile printing applications. This product has been stabilized with additives, water-miscible solvents, and an emulsifier. Its average particle diameter ranges between 17-18 um. This product is designed for neutral or slightly basic systems.
CD 2410
CD 2410, in the form of a particle-sized flake, is a leafing aluminum pigment in a dispersion of resin, aromatic solvents, and aliphatic solvents that can be used in decorative coatings, reflective coatings, aerosols, roof coatings, and industrial coatings. This product's apparent density ranges between 1.18-1.3 kg/L.
CD 2410 WH
CD 2410 WH, in the form of a particle-sized flake, is an aluminum pigment in a water-based paint that can be used in gravure printing inks, flexographic printing inks, and decorative coatings. This product has been stabilized with additives, water-miscible solvents, and an emulsifier. Its average particle diameter ranges between 9.8-12 um. This product is designed for neutral or slightly basic systems.
CD 3008
CD 3008, in the form of a particle-sized flake, is a leafing aluminum pigment in a dispersion of resin, aliphatic solvents, and aromatic solvents that can be used in decorative coatings, industrial coatings, aerosols, and paper coatings. This product's average particle size ranges between 7.8-9.5 um.
CD 3008 WH
CD 3008 WH, in the form of a particle-sized flake, is an aluminum pigment in a water-based paint that can be used in gravure printing inks and flexographic printing inks. This product has been stabilized with additives, water-miscible solvents, and an emulsifier. Its average particle diameter ranges between 7.8-9.5 um.
Copper B 4555
Copper B 4555, in the form of a particle-sized brilliant flake, is a copper pigment that can be used in decorative coatings, paper coatings, craft coatings, aerosols, and screen printing applications. This product's average particle diameter ranges between 38-40 um and its apparent density is no more than 1.05 kg/L.
Copper B 5565
Copper B 6565, in the form of a particle-sized brilliant flake, is a copper pigment that can be used in decorative coatings, paper coatings, craft coatings, screen printing applications, and in aerosols. This product's average particle diameter ranges between 33-37 um and its apparent density is no more than 1.00 kg/L.
Copper Hydropaste B 4555
Copper Hydropaste B 4555, in the form of a particle-sized brilliant flake, is a copper pigment in a water-based paste that can be used in decorative coatings, craft coatings, paints, textile coatings, and paper coatings. This product is dispersible in water-based systems for in situ applications. Its average particle diameter ranges between 38-40 um, and it contains between 83-87% metals.
Copper Hydropaste R 7080
Copper Hydropaste R 7080, in the form of a particle-sized flake with hiding power, is a copper pigment in a water-based paste that can be used in paper coatings, decorative coatings, craft coatings, and textile coatings. This product is dispersible in water-based systems for in-situ applications. Its average particle diameter ranges between 18-22 um, and it contains between 83-87% metals.
Copper Meta R 8090
Copper Meta R 8090, in the form of a particle-sized brilliant flake, is a copper pigment in a paste solvent base that can be used in paper coatings, decorative coatings, aerosols, and craft coatings. This product is a mixture of aliphatic and aromatic solvents in a resin that protects the flakes' metallic brightness. Its average particle diameter ranges between 13-19 um, and it contains between 83-87% metals.
Copper Meta U 2530
Copper Meta U 2530, in the form of a particle-sized brilliant flake, is a copper-zinc alloy of a copper pigment in a paste solvent base that can be used in paper coatings, craft coatings, decorative coatings, and aerosols. This product is a mixture of aliphatic and aromatic solvents in a resin that protects the flakes' metallic brightness. Its average particle diameter ranges between 50-53 um, and it contains between 83-87% metals.
Copper R 7080
Copper R 7080, in the form of a particle-sized brilliant flake, is a copper pigment that can be used in decorative coatings, paper coatings, screen printing applications, industrial coatings, and aerosols. This product's average particle diameter ranges between 20-24 um and its apparent density is no more than 0.95 kg/L.
Copper R 8090
Copper R 8090, in the form of a particle-sized brilliant flake, is a copper pigment that can be used in decorative coatings, paper coatings, screen printing applications, industrial coatings, and aerosols. This product's average particle diameter ranges between 13-19 um and its apparent density is no more than 0.75 kg/L.
Copper U 2530
Copper U 2530, in the form of a particle-sized brilliant flake, is a copper pigment that can be used in decorative coatings, paper coatings, textile coatings, craft coatings, and screen printing applications. Its average particle diameter ranges between 50-53 um and its apparent density is no more than 1.15 kg/L.
Deep Gold 7600
Deep Gold 7600, in the form of a particle-sized brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in decorative lakes, craft coatings, aerosols, and screen printing applications. This product's average particle diameter ranges between 18-20 um, and its apparent density is no more than 0.90 kg/L.
Ducat R 7080
Ducat R 7080, in the form of a particle-sized brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in decorative coatings, paper coatings, screen printing applications, and in aerosols. This product's average particle diameter ranges between 20-25 um, and its apparent density is no more than 1.0 kg/L.
Ducat U 2530
Ducat U 2530, in the form of a particle-sized brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in decorative coatings, craft coatings, textile coatings, screen printing applications, and aerosols. This product's average particle diameter ranges between 50-53 um, and its apparent density is no more than 1.15 kg/L.
English Green U 2530
English Green U 2530, in the form of a particle-sized brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in decorative coatings, textile coatings, screen printing applications, aerosols, and craft coatings. This product's average particle diameter ranges between 48-52 um, and its apparent density is no more than 1.15 kg/L.
Fire Red U 2530
Fire Red U 2530, in the form of a particle-sized brilliant flake, is a copper pigment that can be used in decorative coatings, textile coatings, screen printing applications, and craft coatings. This product's average particle diameter ranges between 50-53 um, and its apparent density is no more than 1.15 kg/L.
Gap 2 EB
Gap 2 EB, in the form of a particle-sized bright flake, is a leafing aluminum pigment in an aliphatic solvent paste that can be used in reflective coatings and for chrome effects. This product's average particle diameter ranges between 20-24 um.
Gap 2 NL
Gap 2 NL, in the form of a particle-sized flake, is a non-leafing aluminum pigment in an aliphatic solvent paste that can be used in industrial coatings, hammerfinish coatings, decorative coatings, aerosols, and polychrome finishes. This product's average particle diameter ranges between 20-24 um.
Gap 3 NL
Gap 3 NL, in the form of a particle-sized flake, is a non-leafing aluminum pigment in an aliphatic solvent paste that can be used in industrial coatings, hammerfinish coatings, decorative coatings, aerosols, and polychrome finishes. This product's average particle diameter ranges between 17-18 um.
Gap 4 EB
Gap 4 EB, in the form of a particle-sized bright flake, is a leafing aluminum pigment in an aliphatic solvent paste that can be used in reflective coatings and for chrome effects. This product's average particle diameter ranges between 9.8-12 um.
Gap 4 NL
Gap 4 NL, in the form of a particle-sized aluminum flake, is a non-leafing aluminum pigment in an aliphatic solvent paste that can be used in industrial coatings, hammerfinish coatings, decorative coatings, aerosols, and polychrome finishes. This product's average particle size ranges between 9.8-12 um.
Gap 495
Gap 495, in the form of a particle-sized flake, is a leafing aluminum pigment in an aliphatic solvent powder that can be used in flexographic printing inks and in powder coatings. This product's average particle diameter ranges between 9.8-12 um.
Gap 8 EB
Gap 8 EB, in the form of a particle-sized bright flake, is a leafing aluminum pigment in an aliphatic solvent paste that can be used in reflective coatings and for chrome effects. This product's average particle diameter ranges between 7.8-9.5 um.
Gap 8 NL
Gap 8 NL, in the form of a particle-sized aluminum flake, is a non-leafing aluminum pigment in an aliphatic solvent paste that can be used in industrial coatings, hammerfinish coatings, flexographic printing inks, aerosols, and polychrome finishes. This product's average particle diameter ranges between 7.8-9.5 um.
Gap 880
Gap 880, in the form of a particle-sized flake, is a non-leafing aluminum pigment in an aliphatic solvent paste that can be used in industrial coatings, hammerfinish coatings, aerosols, and powder coatings. This product's average particle diameter ranges between 7.8-9.5 um.
Gap 895
Gap 895, in the form of a particle-sized flake, is a leafing aluminum pigment in an aliphatic solvent powder that can be used in powder coatings and inks. This product's average particle diameter ranges between 7.8-9.5 um.
Karat Gold U 3045
Karat Gold U 3045, in the form of a particle-sized brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in decorative coatings, textile coatings, screen printing applications, aerosols, and craft coatings. This product's average particle diameter ranges between 48-52 um, and its apparent density is no more than 0.95 kg/L.
Lavender U 2530
Lavender U 2530, in the form of a particle-sized brilliant flake, is a copper pigment that can be used in decorative coatings, craft coatings, textile coatings, and screen printing applications. This product's average particle diameter ranges between 50-53 um, and its apparent density is no more than 1.15 kg/L.
Mandarin U 2530
Mandarin U 2530, in the form of a particle-sized brilliant flake, is a copper pigment that can be used in decorative coatings, textile coatings, screen printing applications, and craft coatings. This product's average particle diameter ranges between 50-53 um, and its apparent density is no more than 1.15 kg/L.
Old Gold R 7585
Old Gold R 7585, in the form of a particle-sized brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in decorative coatings, paper coatings, screen printing applications, and in aerosols. This product's average particle diameter ranges between 18-23 um, and its apparent density is no more than 0.96 kg/L.
Old Gold U 2530
Old Gold U 2530, in the form of a particle-sized brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in decorative coatings, craft coatings, textile coatings, screen printing applications, and in aerosols. This product's average particle diameter ranges between 52-56 um, and its apparent density is no more than 1.15 kg/L.
Pale Gold B 4555
Pale Gold B 4555, in the form of a particle-sized brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in decorative coatings, paper coatings, aerosols, and screen printing applications. This product's average particle diameter ranges between 38-40 um and its apparent density is no more than 1.05 kg/L.
Pale Gold Hydropaste R 8090
Pale Gold Hydropaste R 8090, in the form of a particle-sized flake with hiding power, is a copper-zinc alloy of a bronze pigment in a water-based paste that can be used in decorative coatings, paper coatings, and craft coatings. This product is dispersible in water-based systems for in situ applications. Its average particle diameter ranges between 13-18 um, and it contains between 83-87% metals.
Pale Gold I 41020
Pale Gold I 41020, in the form of a particle-sized flake with hiding power, is a copper-zinc alloy that can be used as a bronze pigment in rotogravure, flexography, screen printing applications, and in aerosols. This product's average particle diameter ranges between 9.5-10.5 and its apparent density is no more than 0.72 kg/L.
Pale Gold I 4918
Pale Gold I 4918, in the form of a particle-sized flake with hiding power, is a copper-zinc alloy that can be used as a bronze pigment in rotogravure, flexography, screen printing applications, and in aerosols. This product's average particle diameter ranges between 8-9 um, and its apparent density is no more than 0.65 kg/L.
Pale Gold Meta B 4555
Pale Gold Meta B 4555, in the form of a particle-sized brilliant flake, is a copper-zinc alloy of a bronze pigment in a paste solvent base that can be used in paper coatings, decorative coatings, craft coatings, and in aerosols. This product is a mixture of aliphatic and aromatic solvents in a resin that protects the flakes' metallic brightness. Its average particle diameter ranges between 38-40 um, and it contains between 83-87% metals.
Pale Gold Meta O 158
Pale Gold Meta O 158, in the form of a particle-sized flake with hiding power, is a copper-zinc alloy of a bronze pigment in a paste oil base that can be used in offset printing inks. This product has been humidified in mineral oil. Its average particle diameter ranges between 3.5-5.0 um, and it contains between 80-84% metals.
Pale Gold Meta R 8090
Pale Gold Meta R 8090, in the form of a particle-sized brilliant flake, is a copper-zinc alloy of a bronze pigment in a paste solvent base that can be used in paper coatings, decorative coatings, aerosols, and craft coatings. This product is a mixture of aliphatic and aromatic solvents in a resin that protects the flakes' metallic brightness. Its average particle diameter ranges between 13-18 um, and it contains between 83-87% metals.
Pale Gold Meta R 90100
Pale Gold Meta R 90100, in the form of a particle-sized brilliant flake, is a copper-zinc alloy of a bronze pigment in a paste solvent base that can be used in paper coatings, decorative coatings, aerosols, and craft coatings. This product is a mixture of aliphatic and aromatic solvents in a resin that protects the flakes' metallic brightness. Its average particle diameter ranges between 11-12.5 um, and it contains between 83-87% metals.
Pale Gold Meta U 2530
Pale Gold Meta U 2530, in the form of a particle-sized brilliant flake, is a copper-zinc alloy of a bronze pigment in a paste solvent base that can be used in paper coatings, screen printing applications, decorative coatings, and craft coatings. This product is a mixture of aliphatic and aromatic solvents along with a resin that protects the flakes' metallic brightness. Its average particle diameter ranges between 50-53 um, and it contains between 83-87% metals.
Pale Gold R 7080
Pale Gold R 7080, in the form of a particle-sized brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in decorative coatings, coil coatings, screen printing applications, and in aerosols. This product's average particle diameter ranges between 20-24 um and its apparent density is no more than 0.90 kg/L.
Pale Gold R 8090
Pale Gold R 8090, in the form of a particle-sized brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in decorative coatings, paper coatings, screen printing applications, and in aerosols. This product's average particle diameter ranges between 13-18 um and its apparent density is no more than 0.80 kg/L.
Pale Gold R 90100
Pale Gold R 90100, in the form of a particle-sized brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in screen printing applications, paper coatings, and in inks. This product's average particle diameter ranges between 11-12.5 um, and its apparent density is no more than 0.75 kg/L.
Pale Gold U 2530
Pale Gold U 2530, in the form of a particle-size brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in decorative coatings, paper coatings, textile coatings, screen printing applications, and craft coatings. This product's average particle diameter ranges between 50-53 um and its apparent density is no more than 1.15 kg/L.
Pale Gold U 3045
Pale Gold U 3045, in the form of a particle-sized brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in decorative coatings, paper coatings, textile coatings, craft coatings, and screen printing applications. This product's average particle diameter ranges between 42-47 um, and its apparent density is no more than 1.10 kg/L.
Alu D1050 WHS
Alu D1050 WHS, in the form of a coarse particle-sized lenticular flake, is a non-leafing aluminum pigment paste for water-based systems that can be used in decorative coatings, craft coatings, paints, architectural coatings, and textile coatings. This product has been encapsulated with silicon dioxide, water-miscible solvents, and an emulsifier. Its average particle size ranges between 46-54 um.
Alu D1054
Alu D1054, in the form of a coarse particle-sized lenticular flake, is a non-leafing aluminum pigment in a solvent paste that can be used in screen printing applications. This product's average particle size ranges between 52-58 um.
Alu D1054 P
Alu D1054 P, in the form of a coarse particle-sized lenticular flake, is a non-leafing aluminum pigment in a mixture of aliphatic and aromatic solvent powders that can be used in decorative coatings and screen printing applications. This product's average particle size ranges between 50-58 um.
Alu D1054 WH
Alu D1054 WH, in the form of a coarse particle-sized lenticular flake, is a non-leafing aluminum pigment paste for water-based systems that can be used in craft coatings, decorative coatings, textile coatings, and paints. This product has been stabilized with additives, water-miscible solvents, and an emulsifier. Its average particle size ranges between 50-58 um.
Alu D1070
Alu D1070, in the form of a coarse particle-sized lenticular flake, is a non-leafing aluminum pigment in a solvent paste that can be used in decorative coatings or industrial coatings. This product's average particle size ranges between 65-75 um.
Alu D1070 P
Alu D1070 P, in the form of a coarse particle-sized lenticular flake, is a non-leafing aluminum pigment in a mixture of aliphatic and aromatic solvent powders that can be used in decorative coatings and screen printing applications. This product's average particle size ranges between 65-75 um.
Alu D2034
Alu D2034, in the form of a particle-sized lenticular flake, is a non-leafing aluminum pigment in a solvent paste that can be used in automotive refinishes and screen printing applications. This product's average particle size ranges between 31-37 um.
Alu D2034 P
Alu D2034 P, in the form of a particle-sized lenticular flake, is a non-leafing aluminum pigment in a mixture of aliphatic and aromatic solvent powders that can be used in decorative coatings and screen printing applications. This product's average particle size ranges between 31-37 um.
Alu D2034 WH
Alu D2034 WH, in the form of a particle-sized flake, is a non-leafing aluminum pigment paste for water-based systems that can be used in decorative and architectural coatings, school paints, craft coatings, and reflective coatings. This product's boiling point ranges between 246.5-250 degrees Celsius.
Alu D3023
Alu D3023, in the form of a coarse particle-sized lenticular flake, is a non-leafing aluminum pigment in a solvent paste that can be used in automotive refinishes. This product's average particle size ranges between 21-25 um.
Alu D3027 P
Alu D3027 P, in the form of a particle-sized lenticular flake, is a non-leafing aluminum pigment in a mixture of aliphatic and aromatic solvent powder that can be used in decorative coatings and screen printing applications. This product's average particle size ranges between 25-29 um.
Alu D4016
Alu D4016, in the form of a particle-sized lenticular flake, is a non-leafing aluminum pigment in a solvent paste that can be used in automotive refinishes. This product's average particle size ranges between 14-18 um.
Alu F2033
Alu F2033, in the form of a particle-sized irregular flake, is a non-leafing aluminum pigment in a solvent paste that can be used in automotive refinishes. This product's average particle size ranges between 31-35 um.
Alu F2033 P
Alu F2033 P, in the form of a particle-sized irregular flake, is a non-leafing aluminum pigment in a powder mixture of aliphatic and aromatic solvents that can be used in decorative coatings and screen printing applications. This product's average particle size ranges between 30-36 um.
Alu F3022
Alu F3022, in the form of a particle-sized irregular flake, is a non-leafing aluminum pigment in a solvent paste that can be used in automotive refinishes and decorative paints. This product's average particle size ranges between 20-24 um.
Alu F3022 L
Alu F3022 L, in the form of a particle-sized irregular flake with high brilliance, is a leafing aluminum pigment in a solvent paste that can be used in decorative paints, aerosols, reflective paints and to establish chrome effects. This product's average particle diameter ranges between 20-24 um.
Alu F3022 WHS
Alu F3022 WHS, in the form of a particle-sized irregular flake, is a non-leafing aluminum pigment for water-based systems that can be used in decorative coatings, craft coatings, architectural coatings, textile coatings, and paints. This product has been encapsulated with silicon dioxide, water-miscible solvents, and an emulsifier. Its average particle size ranges between 20-24 um.
Alu F3024
Alu F3024, in the form of a particle-sized irregular flake, is a non-leafing aluminum pigment in a solvent paste that can be used in automotive refinishes and decorative paints. This product's average particle size ranges between 22-26 um.
Alu F3028
Alu F3028, in the form of a particle-sized irregular flake, is a non-leafing aluminum pigment in a solvent paste that can be used in automotive refinishes. This product's average particle diameter ranges between 26-30 um.
Alu F4007 P
Alu F4007 P, in the form of a particle-sized irregular flake, is a leafing aluminum pigment powder that can be used in powder coatings, flexographic or gravure printing inks, decorative coatings, reflective paints, and aerosols, among other uses. This product's average particle size ranges between 6-9 um.
Alu F4009
Alu F4009, in the form of a particle-sized irregular flake, is a non-leafing aluminum pigment in a solvent paste that can be used in automotive refinishes and can coatings. This product's average particle diameter ranges between 9-11 um.
Alu F4009 P
Alu F4009 P, in the form of a particle-sized irregular flake, is a non-leafing aluminum pigment in a mixture of aliphatic and aromatic solvent powder that can be used in decorative coatings and screen printing applications. This product's average particle size ranges between 10-12 um.
Alu F4009IPA
Alu F4009IPA, in the form of a mixture, is a non-leafing aluminum pigment in a paste alcohol base that can be used in offset printing applications. This product is partially soluble in water and its apparent density ranges between 0.80-1.0 kg/L.
Alu F4010 L
Alu F4010 L, in the form of a particle-sized irregular flake with high brilliance, is a leafing aluminum pigment in a solvent paste that can be used in aerosols, reflective paints, decorative paints, and to establish chrome effects. This product's average particle diameter ranges between 8.5-11.5 um.
Alu F4011
Alu F4011, in the form of a particle-sized irregular flake, is a non-leafing aluminum pigment in a solvent paste that can be used in automotive refinishes. This product's average particle diameter ranges between 9.5-12.5 um.
Alu F4015
Alu F4015, in the form of a particle-sized irregular flake, is a non-leafing aluminum pigment in a solvent paste that can be used in automotive refinishes. This product's average particle size ranges between 14-18 um.
Alu M1060
Alu M1060, in the form of a coarse particle-sized irregular flake, is a non-leafing aluminum pigment in a solvent paste that can be used in decorative paints. This product's average particle size ranges between 50-60 um.
Alu M2033
Alu M2033, in the form of a particle-sized irregular flake, is a non-leafing aluminum pigment in a solvent paste that can be used in automotive refinishes. This product's average particle diameter ranges between 30-36 um.
Alu M3029
Alu M3029, in the form of a particle-sized irregular flake, is a non-leafing aluminum pigment in a solvent paste that can be used in automotive refinishes. This product's average particle diameter ranges between 27-31 um.
Alu M3029 P
Alu M3029 P, in the form of a particle-sized irregular flake, is a non-leafing aluminum pigment in a mixture of aliphatic and aromatic solvent powder. This product's average particle size ranges between 27-31 um.
Rich Gold 990 NL
Rich Gold 990 NL, in the form of a particle-sized flake with hiding power, is a copper-zinc alloy that can be used as a non-leafing bronze pigment in gravure printing inks, flexographic printing inks, and screen printing applications. This product's average particle diameter ranges between 9.2-10.2 microns and its apparent density is no more than 0.80 kg/L.
Rich Gold B 4555
Rich Gold B 4555, in the form of a particle-sized brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in decorative coatings, paper coatings, screen printing applications, and aerosols. This product's average particle diameter ranges between 37-40 um, and its apparent density is no more than 1.05 kg/L.
Rich Gold Hydropaste B 4555
Rich Gold Hydropaste B 4555, in the form of a particle-sized brilliant flake, is a copper-zinc alloy of a bronze pigment in a water-based paste that can be used in decorative coatings, craft coatings, paints, textile coatings, and paper coatings. This product is dispersible in water-based systems for in-situ applications. Its average particle diameter ranges between 37-40 um, and it contains between 83-87% metals.
Rich Gold Hydropaste B 5565
Rich Gold Hydropaste B 5565, in the form of a particle-sized brilliant flake, is a copper-zinc alloy of a bronze pigment in a water-based paste that can be used in decorative coatings, craft coatings, paints, and textile coatings. This product is dispersible in water-based systems for in situ applications. Its average particle diameter ranges between 30-35 um, and it contains between 83-87% metals.
Rich Gold Hydropaste O 137
Rich Gold Hydropaste O 137, in the form of a particle-sized flake with hiding power, is a copper-zinc alloy of a bronze pigment in a water-based paint that can be used in decorative coatings and paper coatings. This product is dispersible in water-based systems for in-situ applications. Its average particle diameter ranges between 2.5-3.5 um, and it contains between 83-87% metals.
Rich Gold Hydropaste O 158
Rich Gold Hydropaste O 158, in the form of a particle-sized flake with hiding power, is a copper-zinc alloy of a bronze pigment in a water-based paste that can be used in decorative coatings and paper coatings. This product is dispersible in water-based systems for in situ applications. Its average particle diameter ranges between 3.5-5.0 um and it contains between 83-87% metals.
Rich Gold Hydropaste R 8090
Rich Gold Hydropaste R 8090, in the form of a particle-sized flake with hiding power, is a copper-zinc alloy of a bronze pigment in a water-based paste that can be used in decorative coatings, craft coatings, and paper coatings. This product is dispersible in water-based systems for in situ applications. Its average particle diameter ranges between 13-15 um, and it contains between 83-87% metals.
Rich Gold Hydropaste R 90100
Rich Gold Hydropaste R 90100, in the form of particle-sized flakes with hiding power, is a copper-zinc alloy of a bronze pigment in a water-based paste that can be used in decorative coatings, paper coatings, and in inks. This product is dispersible in water-based systems for in situ applications. Its average particle diameter ranges between 11-12.5 um and it contains between 83-87% metals.
Rich Gold Hydropaste U 3045
Rich Gold Hydropaste U 3045, in the form of a particle-sized brilliant flake, is a copper-zinc alloy of a bronze pigment in a water-based paste that can be used in decorative coatings, craft coatings, paints, and textile coatings. This product is dispersible in water-based systems for in-situ applications. Its average particle diameter ranges between 42-47 um, and it contains between 83-87% metals.
Rich Gold I 2713
Rich Gold I 2713, in the form of a particle-sized flake with hiding power, is a copper-zinc alloy that can be used as a bronze pigment in rotogravure, flexography, screen printing applications, and in aerosols. This product's average particle diameter ranges between 6-7 um, and its apparent density is no more than 0.60 kg/L.
Rich Gold I 3815
Rich Gold I 3815, in the form of a particle-sized flake with hiding power, is a copper-zinc alloy that can be used as a bronze pigment in rotogravure, flexography, screen printing applications, and in aerosols. This product's average particle diameter ranges between 7-8 um, and its apparent density is no more than 0.65 kg/L.
Rich Gold I 41018
Rich Gold I 41018, in the form of a particle-sized flake with hiding power, is a copper-zinc alloy that can be used in rotogravure, flexography, screen printing applications, and in aerosols. This product's average particle diameter ranges between 9-11 um, and its apparent density is no more than 0.67 kg/L.
Rich Gold I 41020
Rich Gold I 41020, in the form of a particle-sized flake with hiding power, is a copper-zinc alloy that can be used as a bronze pigment in rotogravure, flexography, screen printing applications, and aerosols. This product's average particle diameter ranges between 9.5-10.5 um, and its apparent density is no more than 0.72 kg/L.
Rich Gold I 4918
Rich Gold I 4918, in the form of a particle-sized flake with hiding power, is a copper-zinc alloy that can be used as a bronze pigment in rotogravure, flexography, screen printing applications, and in aerosols. This product's average particle diameter ranges between 8-9 um, and its apparent density is no more than 0.65 kg/L.
Rich Gold I 5918
Rich Gold I 5918, in the form of a particle-sized flake with hiding power, is a copper-zinc alloy that can be used as a bronze pigment in rotogravure, flexography, screen printing applications, and aerosols. This product's average particle diameter ranges between 8-9 um, and its apparent density is no more than 0.65 kg/L.
Rich Gold Meta B 4555
Rich Gold Meta B 4555, in the form of a particle-sized brilliant flake, is a copper-zinc alloy of a bronze pigment in a paste solvent base that can be used in paper coatings, decorative coatings, craft coatings, and aerosols. This product is a mixture of aliphatic and aromatic solvents in a resin that protects the flakes' metallic brightness. Its average particle diameter ranges from 37-40 um, and it contains between 83-87% metals.
Rich Gold Meta B 5565
Rich Gold Meta B 5565, in the form of a particle-sized brilliant flake, is a copper-zinc alloy of a bronze pigment in a paste solvent base that can be used in decorative coatings, aerosols, paper coatings, and craft coatings. This product is a mixture of aliphatic and aromatic solvents in a resin that protects the flakes' metallic brightness. Its average particle diameter ranges between 30-35 um, and it contains between 83-87% metals.
Rich Gold Meta I 2713
Rich Gold Meta I 2713, in the form of a particle-sized brilliant flake, is a copper-zinc alloy of a bronze pigment in a paste solvent base that can be used in decorative coatings, aerosols, paper coatings, and craft coatings. This product is a mixture of aliphatic and aromatic solvents in a resin that protects the flakes' metallic brightness. Its average particle diameter ranges between 6-7 um, and it contains between 83-87% metals.
Rich Gold Meta I 3815
Rich Gold Meta I 3815, in the form of a particle-sized brilliant flake, is a copper-zinc alloy of a bronze pigment in a paste solvent base that can be used in decorative coatings, aerosols, paper coatings, and craft coatings. This product is a mixture of aliphatic and aromatic solvents in a resin that protects the flakes' metallic brightness. Its average particle diameter ranges between 7-8 um, and it contains between 83-87% metals.
Rich Gold Meta I 41020
Rich Gold Meta I 41020, in the form of a particle-sized brilliant flake, is a copper-zinc alloy of a bronze pigment in a paste solvent base that can be used in decorative coatings, aerosols, paper coatings, and craft coatings. This product is a mixture of aliphatic and aromatic solvents in a resin that protects the flakes' metallic brightness. Its average particle diameter ranges between 9.5-10.5 um, and it contains between 83-87% metals.
Rich Gold Meta I 4918
Rich Gold Meta I 4918, in the form of a particle-sized brilliant flake, is a copper-zinc alloy of a bronze pigment in a paste solvent base that can be used in decorative coatings, aerosols, paper coatings, and craft coatings. This product is a mixture of aliphatic and aromatic solvents in a resin that protects the flakes' metallic brightness. Its average particle diameter ranges between 8-9 um, and it contains between 83-87% metals.
Rich Gold Meta O 137
Rich Gold Meta O 137, in the form of a particle-sized brilliant flake, is a copper-zinc alloy of a bronze pigment in a paste solvent base that can be used in decorative coatings, aerosols, paper coatings, and craft coatings. This product is a mixture of aliphatic and aromatic solvents in a resin that protects the flakes' metallic brightness. Its average particle diameter ranges between 2.5-3.5 um, and it contains between 83-87% metals.
Rich Gold Meta R 7080
Rich Gold Meta R 7080, in the form of a particle-sized brilliant flake, is a copper-zinc alloy of a bronze pigment in a paste solvent base that can be used in decorative coatings, aerosols, paper coatings, and craft coatings. This product is a mixture of aliphatic and aromatic solvents in a resin that protects the flakes' metallic brightness. Its average particle diameter ranges between 20-24 um, and it contains between 83-87% metals.
Rich Gold Meta R 8090
Rich Gold Meta R 8090, in the form of a particle-sized brilliant flake, is a copper-zinc alloy of a bronze pigment in a paste solvent base that can be used in paper coatings, decorative coatings, aerosols, and craft coatings. This product is a mixture of aliphatic and aromatic solvents in a resin that protects the flakes' metallic brightness. Its average particle diameter ranges between 13-15 um, and it contains between 83-87% metals.
Rich Gold Meta R 90100
Rich Gold Meta R 90100, in the form of a particle-sized brilliant flake, is a copper-zinc alloy of a bronze pigment in a paste solvent base that can be used in paper coatings, decorative coatings, aerosols, and craft coatings. This product is a mixture of aliphatic and aromatic solvents in a resin that protects the flakes' metallic brightness. Its average particle diameter ranges between 11-12.5 um, and it contains between 83-87% metals.
Rich Gold Meta U 2530
Rich Gold Meta U 2530, in the form of a particle-sized brilliant flake, is a copper-zinc alloy of a bronze pigment in a paste solvent base that can be used in paper coatings, aerosols, decorative coatings, and craft coatings. This product is a mixture of aliphatic and aromatic solvents along with a resin that protects the flakes' metallic brightness. Its average particle diameter ranges between 48-52 um, and it contains between 83-87% metals.
Rich Gold Meta U 3045
Rich Gold Meta U 3045, in the form of a particle-sized brilliant flake, is a copper-zinc alloy of a bronze pigment in a paste solvent base that can be used in decorative coatings, aerosols, paper coatings, and craft coatings. This product is a mixture of aliphatic and aromatic solvents in a resin that protects the flakes' metallic brightness. Its average particle diameter ranges between 42-47 um, and it contains between 83-87% metals.
Rich Gold O 137
Rich Gold O 137, in the form of a particle-sized flake with hiding power, is a copper-zinc alloy that can be used as a bronze pigment in offset printing inks. This product's average particle diameter ranges between 2.5-3.5 um, and its apparent density is no more than 0.60 kg/L.
Rich Gold O 158
Rich Gold O 158, in the form of a particle sized flake with hiding power, is a copper-zinc alloy that can be used as a bronze pigment in offset printing inks. This product's average particle diameter ranges between 3.5-5.0 um, and its apparent density is no more than 0.60 kg/L.
Rich Gold R 7080
Rich Gold R 7080, in the form of a particle-sized brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in decorative coatings, paper coatings, screen printing applications, and in aerosols. This product's average particle diameter ranges between 20-24 um and its apparent density is no more than 0.90 kg/L.
Rich Gold R 8090
Rich Gold R 8090, in the form of a particle-sized brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in decorative coatings, paper coatings, screen printing applications, and aerosols. This product's average particle diameter ranges from 13-15 um and its apparent density is no more than 0.80 kg/L.
Rich Gold R 8090 NL
Rich Gold R 8090 NL, in the form of a particle-sized brilliant flake, is a copper-zinc alloy of a non-leafing bronze pigment powder that can be used in decorative coatings, paper coatings, screen printing applications, and in aerosols. This product's average particle diameter ranges between 13-15 um and its apparent density is no more than 0.80 kg/L.
Rich Gold R 90100
Rich Gold R 90100, in the form of a particle-sized brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in decorative coatings, aerosols, screen printing applications, and in paper coatings. This product's average particle diameter ranges between 11-12.5 um, and its apparent density is no more than 0.75 kg/L.
Rich Gold U 2530
Rich Gold U 2530, in the form of a particle-sized brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in decorative coatings, paper coatings, textile coatings, screen printing applications, and craft coatings. This product's average particle diameter ranges between 48-52 um and its apparent density is no more than 1.15 kg/L.
Rich Gold U 3045
Rich Gold U 3045, in the form of a particle-sized brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in decorative coatings, paper coatings, textile coatings, craft coatings, and screen printing applications. This product's average particle diameter ranges between 42-47 um and its apparent density is no more than 1.10 kg/L.
Rich Pale Gold B 4555
Rich Pale Gold B 4555, in the form of a particle-sized brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in decorative coatings, paper coatings, aerosols, and screen printing applications. This product's average particle diameter ranges between 40-44 um and its apparent density is no more than 1.05 kg/L.
Rich Pale Gold C 2025
Rich Pale Gold C 2025, in the form of a particle sized brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in paper coatings and bronzing machines. This product's particle diameter ranges between 58-62 um and its apparent density is no more than 0.95 kg/L.
Rich Pale Gold Hydropaste R 7080
Rich Pale Gold Hydropaste R 7080, in the form of a particle-sized brilliant flake, is a copper-zinc alloy of a copper pigment in a water-based paste that can be used in paper coatings, decorative coatings, and craft coatings. This product is dispersible in water-based systems for in situ applications. Its average particle diameter ranges between 22-25 um, and it contains between 83-87% metals.
Rich Pale Gold Hydropaste R 8090
Rich Pale Gold Hydropaste R 8090, in the form of a particle-sized flake with hiding power, is a copper-zinc alloy of a bronze pigment in a water-based paste that can be used in paper coatings, craft coatings, and decorative coatings. This product is dispersible in water-based systems for in situ applications. Its average particle diameter ranges between 12-18 um, and it contains between 83-87% metals.
Rich Pale Gold Hydropaste U 2530
Rich Pale Gold Hydropaste U 2530, in the form of a particle-sized brilliant flake, is a copper-zinc alloy of a bronze pigment in a water-based paste that can be used in decorative coatings, craft coatings, paints, and textile coatings. This product is dispersible in water-based systems for in-situ applications. Its average particle diameter ranges between 52-56 um, and it contains between 83-87% metals.
Rich Pale Gold I 4918
Rich Pale Gold I 4918, in the form of a particle-sized flake with hiding power, is a copper-zinc alloy that can be used as a bronze pigment in rotogravure, flexography, screen printing applications, and aerosols. This product's average particle diameter ranges between 8-9 um and its apparent density is no more than 0.65 kg/L.
Rich Pale Gold Meta B 4555
Rich Pale Gold Meta B 4555, in the form of a particle-sized brilliant flake, is a copper-zinc alloy of a bronze pigment in a paste solvent base that can be used in paper coatings, craft coatings, decorative coatings, and aerosols. This product is a mixture of aliphatic and aromatic solvents in a resin that protects the flakes' metallic brightness. Its average particle diameter ranges between 40-44 um, and it contains between 83-87% metals.
Rich Pale Gold Meta O158
Rich Pale Gold Meta O158, in the form of a particle-sized flake with hiding power, is a copper-zinc alloy of a bronze pigment in a paste oil base that can be used in offset printing inks. This product has been humidified in mineral oil. Its average particle diameter ranges between 3.5-5.0 um, and it contains between 78-82% metals.
Rich Pale Gold Meta R 8090
Rich Pale Gold Meta R 8090, in the form of a particle-sized brilliant flake, is a copper-zinc alloy of a bronze pigment in a paste solvent base that can be used in paper coatings, decorative coatings, aerosols, and craft coatings. This product is a mixture of aliphatic and aromatic solvents in a resin that protects the flakes' metallic brightness. Its average particle diameter ranges between 12-18 um, and it contains between 83-87% metals.
Rich Pale Gold O 158
Rich Pale Gold O 158, in the form of a particle-sized flake with hiding power, is a copper-zinc alloy that can be used as a bronze pigment in offset printing inks. This product's average particle diameter ranges between 3.5-5.0 um and its apparent density is no more than 0.60 kg/L.
Rich Pale Gold R 7080
Rich Pale Gold R 7080, in the form of a particle-sized brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in decorative coatings, paper coatings, screen printing applications, and aerosols. This product's average particle diameter ranges between 22-25 um and its apparent density is no more than 1.0 kg/L.
Rich Pale Gold R 8090
Rich Pale Gold R 8090, in the form of a particle-sized brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in decorative coatings, paper coatings, screen printing applications, and in aerosols. This product's average particle diameter ranges between 12-18 um and its apparent density is no more than 0.90 kg/L.
Rich Pale Gold U 2530
Rich Pale Gold U 2530, in the form of a particle-sized brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in paper coatings, textile coatings, decorative coatings, screen printing applications, and craft coatings. Its average particle diameter ranges between 52-56 um and its apparent density is no more than 1.15 kg/L.
Royal Lemon R 7080
Royal Lemon R 7080, in the form of a particle-sized brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in decorative coatings, paper coatings, screen printing applications, and in aerosols. This product's average particle diameter ranges between 20-25 um, and its apparent density is no more than 1.0 kg/L.
Royal Lemon U 2530
Royal Lemon U 2530, in the form of a particle-sized brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in decorative coatings, screen printing, craft coatings, textile coatings, and aerosols. This product's average particle diameter ranges between 48-52 um, and its apparent density is no more than 1.15 kg/L.
RPG 760X/55
RPG 760X/55, in the form of a particle-sized brilliant flake, is a copper-zinc alloy that can be used as a bronze pigment in decorative lakes, craft coatings, aerosols, and screen printing applications. This product's average particle diameter ranges between 16-19 um, and its apparent density is no more than 0.85 kg/L.
Wine U 2530
Wine U 2530, in the form of a particle-sized brilliant flake, is a copper pigment that can be used in decorative coatings, textile coatings, screen printing applications, and craft coatings. This product's average particle diameter ranges between 50-53 um, and its apparent density is no more than 1.15 kg/L.
