Home / Graphic Arts & Inks / Suppliers / Evonik Operations GmbH, BL Coating Additives
Graphic Arts & Inks
Evonik Operations GmbH, BL Coating Additives
Evonik Operations GmbH, BL Coating Additives lists 330 grades in Graphic Arts & Inks. The sheets saved on this site are below.
Grades from Evonik Operations GmbH, BL Coating Additives
Carbowet® 106 Surfactant
Carbowet® 106 Surfactant is a multifunctional, low-foaming, solvent-free, and alkylophenol ethoxylate-free additive for pigment and substrate wetting. This cost-effective surfactant provides rapid substrate and pigment wetting and performs in a wide range of applications including architectural and industrial coatings, adhesives, pigment synthesis, pigment dispersion, and inks. Carbowet® 106 Surfactant is a clear, low-odor, low-viscosity liquid that is 100% active and features excellent ease of use. Carbowet® 106 Surfactant has an HLB of 10.7 and is an environmentally preferable alternative to alkylphenol ethoxylates having approximately 6 moles of ethylene oxide.
CARBOWET® 109 Surfactant
CARBOWET® 109 Surfactant is a multifunctional, low-foaming, solvent-free, and alkylophenol ethoxylate-free additive for pigment and substrate wetting. This cost-effective surfactant provides rapid substrate and pigment wetting and performs in a wide range of applications including architectural and industrial coatings, adhesives, pigment synthesis, pigment dispersion and inks. CARBOWET® 109 Surfactant is a clear, low-odor, low-viscosity liquid that is 100% active and features excellent ease of use. CARBOWET® 109 Surfactant has an HLB of 13.1 and is an environmentally preferable alternative to alkylphenol ethoxylates having approximately 9 moles of ethylene oxide.
Carbowet® 138 Surfactant
Carbowet® 138 Surfactant is a multifunctional additive for pigment and substrate wetting. This nonionic surfactant is typically used alone or in combination with an anionic surfactant. This cost-effective surfactant can provide rapid substrate and pigment wetting and perform in a wide range of applications.
Carbowet® GA-100 Surfactant
Carbowet® GA-100 Surfactant is an optimized combination of nonionic additives designed to provide multifunctional wetting, stabilization, and compatibilization benefits in a wide range of aqueous formulations. Carbowet® GA-100 offers superior low-foam pigment wetting and milling efficiency benefits without the water sensitivity, foam, and rheology problems that are associated with APE surfactants. The performance characteristics of Carbowet® GA-100 surfactant extend to a wide range of applications and formulations in which the combination of dynamic wetting and compatibilization and stabilization can provide unique benefits. Furthermore, Carbowet® GA-100 surfactant contains no added APEs or solvents and is an easy-to-incorporate liquid additive. Carbowet® GA-100 surfactant offers the best performance in architectural paint millbases.
Carbowet® GA-210 Surfactant
Carbowet® GA-210 Surfactant is a formulated nonionic additive for use in a wide range of applications. This multifunctional, low- foaming grind aid can provide rapid pigment and substrate wetting and is an environmentally preferable alternative to APE- containing surfactants. It is designed to assist in the formulation of low- to zero-VOC coatings while offering improved color development, freeze-thaw stability, and scrub resistance. The performance advantages provided by Carbowet® GA-210 surfactant extend to a variety of applications where surface tension reduction and wetting combined in a compatible, easy-to-incorporate liquid are desired. Carbowet® GA-210 surfactant offers the most universal and balanced properties suitable for all applications.
Carbowet® GA-211 Surfactant
Carbowet® GA-211 Surfactant is an optimized combination of nonionic additives designed to provide multifunctional wetting and stabilization benefits in a wide range of aqueous formulations. Carbowet® GA-211 surfactant can provide exceptional dry pigment wetting and deaeration and optimal milling efficiency, allowing for faster and stronger color development. The combination of properties provided by Carbowet® GA-211 surfactant can be used in a variety of applications for dynamic wetting, compatibilization, emulsification, and stabilization where an easy-to-incorporate liquid additive is desired. Carbowet® GA-211 surfactant offers low foam and strong dynamic wetting properties.
Carbowet® GA-221 Surfactant
Carbowet® GA-221 Surfactant is an optimized combination of nonionic additives designed to provide multifunctional wetting and stabilization benefits in a wide range of aqueous formulations. Carbowet® GA-221 surfactant can provide exceptional dry pigment wetting and deaeration and optimizes milling efficiency, allowing for faster and stronger color development. The combination of properties provided by Carbowet® GA-221 surfactant can be used in a variety of applications for dynamic wetting, compatibilization, emulsification, and stabilization where an easy-to-incorporate liquid additive is desired. Compared to related products, Carbowet® GA-221 surfactant offers the most stabilization benefits and is a first choice for organic and carbon black pigment dispersions.
COLOROL® F
COLOROL® F is a hazy liquid formulation of high Mw phosphoamino structures. It can be used for solventborne formulations, as well as suitable for pigment concentrates and for direct grinds (with binder). This product ensures proper wetting and stabilization of inorganic and organic pigments. It is recommended for architectural coatings, bentonite pastes, wood coatings, industrial coatings, and anti-corrosion coatings.
ACEMATT® 3300
ACEMATT® 3300 is an advanced polymer-treated thermal silica, characterized by very good matting efficiency combined with high transparency. It has been developed to use in soft-feel coatings with high haptic requirements. It is used for water-based coatings, waterborne UV coatings, coatings for leather and films, and all types of top coats. Coating formulations containing this product has also shown outstanding resistance to household chemicals.
ACEMATT® 3400
ACEMATT® 3400 is a matting agent exhibiting a multitude of exciting benefits. In solvent and waterborne coatings, the surface modification leads to an outstanding suspension behavior. In waterborne systems, there is only a minimum adsorption of associative thickeners resulting in improved rheology stability. Excellent transparency is obtained making it ideal for clear wood coatings, as observed by the depth of color when applied over colored substrates.
ACEMATT® 3600
ACEMATT® 3600 is a high performance, very fine-grained polymer-treated precipitated silica. This product is especially developed for 100% radically curing UV-coatings obtaining films with very high surface smoothness. ACEMATT® 3600 provides a very low thickening effect and high chemical resistance. It is particularly suitable for use in very thin or very thick UV-coating.
ACEMATT® 790
ACEMATT® 790 as untreated, fine particle sized precipitated silica is distinguished by high matting efficiency and particularly suitable for pigmented coatings systems.
ACEMATT® 810
ACEMATT® 810 is an untreated coarse-grained precipitated silica and is distinguished by high matting efficiency and particularly suitable for pigmented coatings systems. This product is suggested to be used in can and coil coatings, sheet coatings, and decorative and industrial coatings as well. ACEMATT® 810 is easily and evenly dispersed in coatings, and does not adversely affect the other application properties of coating systems.
ACEMATT® HK 125
ACEMATT® HK 125 is a high performance, untreated coarse-grained precipitated silica with heterogeneous particle size distribution. This efficient matting agent is particularly suitable for pigmented systems with low sheen, 85° reflectometer value. ACEMATT® HK 125 is often used in wood and decorative coatings.
ACEMATT® HK 390
ACEMATT® HK 390 is an untreated, finer grade matting agent based on precipitated silica. Providing very high compatibility it can be used in a large variety of coatings. The improved orientation in coating systems effectively prevents mottling.
ACEMATT® HK 400
ACEMATT® HK 400 is a high performance, untreated fine-grained precipitated silica developed for a variety of applications in paints and coatings. This matting agent is primarily used in pigmented coatings systems. ACEMATT® HK 400 is widley used in can and coil coatings, decorative, wood, and industrial coatings.
ACEMATT® HK 440
ACEMATT® HK 440 is a high performance, untreated extremely coarse-grained precipitated silica developed for a variety of applications in paint and coatings. This product is particularly suitable for pigmented coatings systems with very low sheen, 85° reflectometer value. This highly efficient matting agent is used in decorative and industrial coatings, base coats and thick-film coatings.
ACEMATT® HK 520
ACEMATT® HK 520 is an untreated, medium particle-sized precipitated silica. Providing very high compatibility it can be used in a large variety of coatings. The improved orientation in coating systems effectively prevents mottling.
ACEMATT® OK 390
ACEMATT® OK 390 is a wax-treated, finer-grade matting agent based on precipitated silica. Providing very high compatibility it can be used in a large variety of coatings.
ACEMATT® OK 412
ACEMATT® OK 412 is a high performance, fine-grained wax after-treated precipitated silica developed for a variety of applications in paints and coatings. This effective matting agent is suitable for pigmented coatings. Due to the remarkable suspension behavior, ACEMATT® OK 412 is particularly suitable for clear coatings and other non-pigmented systems. The physical properties of this product makes it an all-purpose matting agent which obtains films with excellent surface smoothness.
ACEMATT® OK 500
ACEMATT® OK 500 is a high performance, fine-grained wax after-treated precipitated silica developed for a variety of applications in paints and coatings. This product is suitable for pigmented and non-pigmented systems, and due to the excellent suspension behavior, it is particularly applicable in clear coatings. The physical properties of ACEMATT® OK 500 makes it an all-purpose matting agent which obtains superior surface smoothness on films.
ACEMATT® OK 520
ACEMATT® Matting agents are high performance silica developed for a variety of applications in Paints and Coatings. ACEMATT® OK 520 is an easily dispersible, organically treated matting agent suitable for general applications. This matting agent allows exceptional surface characteristics with excellent slip-effect, also in pigmented coatings. As a result of its outstanding suspension behavior, it is especially suitable for use in clear coats.
ACEMATT® OK 607
ACEMATT® OK 607 is a high performance, very fine-grained wax after-treated precipitated silica developed for a variety of applications in paints and coatings. This matting agent is suitable for pigmented, as well as non-pigmented systems. ACEMATT® OK 607 provides a high sheen, 85° reflectometer value, and is very suitable for thin-film coatings. Due to the suspension behavior, it is also particularly applicable in clear coatings which obtains films with the highest surface smoothness.
ACEMATT® OK 607 LC
ACEMATT® OK 607 LC is a very fine-grained wax after-treated precipitated silica. It is mainly used as a high-purity filler for e-coats due to its outstanding suspension behaviour and low electrical conductivity.
ACEMATT® OK 900
ACEMATT® OK 900 is a highly efficient, medium particle-sized, wax-treated precipitated silica. It is especially recommended for coil coatings as well as general industrial coatings.
ACEMATT® TS 100
ACEMATT® TS 100 is a high performance matting agent adding versatility to your nail polish formulations. Only low levels of addition give a matt or crackle finish. The product, which is a fumed silica is listed with the INCI name 'Silica'.
Dynol™ 360 Surfactant
Dynol™ 360 Surfactant is a low-foam super wetting and coalescing surfactant. It is a 100% active solvent-free liquid used in a wide variety of waterborne applications, including wood metal, plastic coatings, and fountain solutions. Dynol™ 360 Surfactant offers superior dynamic surface tension reduction and wetting, outstanding defect-free foam control, and excellent stability in systems ranging in pH from 3-13. It also helps to lower the minimum film formation temperature (MFFT) of a system while aiding in coalescence, allowing formulations to comply with stringent environmental VOC requirements. Suggested applications include wood coatings, plastic coatings, low-VOC coatings, and fountain solutions.
Dynol™ 604 Surfactant
Dynol™ 604 Surfactant is a low-VOC, low foam, nonionic wetting agent ideal for high-performance waterborne applications. This wetting agent has the ability to reduce both equilibrium and dynamic surface tension to a degree not found with other surfactants. A 100% active liquid. Typical applications include, wood coatings, printing inks, concrete sealers, floor polishes, leather coatings, metal/plastic primer and topcoats, architectural paints, pressure-sensitive adhesives and more.
Dynol™ 607 Surfactant
Dynol™ 607 surfactant has been developed to meet the growing need for high performance and cost effective surfactants. It provides a unique balance of properties for a wide range of waterbased industrial applications compared with traditional surfactants such as fluorosurfactants and silicones. Dynol™ 607 applications may include, coatings, graphic arts, adhesives, latex dipping, dye and pigment synthesis, pigment grinding, metalworking fluids, waste water treatment and more.
Dynol™ 800 Surfactant
Dynol™ 800 is a low foam superwetter with exceptional performance in water-based coatings and inks. Dynol™ 800 provides a superior balance of properties compared to traditional fluorosurfactants and silicone surfactants, with exceptional performance in wood and plastic coatings as well as a wide variety of other water based coating applications. Dynol™ 800 surfactant has the ability to reduce both equilibrium and dynamic surface tension to levels not achieved with other surfactants. Dynol™ 800 surfactant is an excellent alternative for difficult-to-wet substrates requiring good flow and leveling under diverse application conditions.
Dynol™ 810 Surfactant
Dynol™ 810 is a low foam superwetter with exceptional performance in water-based inks and coatings. Dynol™ 810 provides a superior balance of properties compared to traditional fluorosurfactants and silicone surfactants, with exceptional performance in wood and plastic coatings as well as a wide variety of other water based coating applications. Dynol™ 810 surfactant has the ability to reduce both equilibrium and dynamic surface tension to levels not achieved with other surfactants. Dynol™ 810 surfactant is an excellent alternative for difficult-to-wet substrates requiring good flow and leveling under diverse application conditions.
ADDID® 900
ADDID® 900 is a diamino-functional trimethoxy silane adhesion promoter. It promotes adhesion on surfaces of siliceous, oxidic, metallic and ceramic nature. With this product excellent adhesion can be obtained on substrates like aluminum, glass, steel, plastics and paper. Due to ADDID® 900's improved adhesion on pigment and fillers, improvements in pigment wetting, particle aggregation, and a reduction of sedimentation can be obtained. This results in improvements in the optical (e.g. gloss) and mechanical properties (e.g. resistance under wet conditions).
ADDID® 911
ADDID® 911 is an adhesion promoter for solventborne and waterborneprimers and coating formulations. It is based on an epoxy-functional silane.
AERODISP® W 7520
AERODISP® W 7520 is a low viscosity, water-based dispersion of AEROSIL® fumed silica, with a slightly alkaline pH. It is a milky-white liquid with a slight ammonia odor that has a low thickening effect and low viscosity. AERODISP® W 7520 is used for stabilization for emulsions, adhesive promotion, anti-slip, anti-blocking, and surface treatment such as polishing. It also can be used for rheology control and and flocculation aid.
AERODISP® W 7520 N
AERODISP® W 7520 N is a low viscosity, water-based dispersion of AEROSIL® fumed silica, with a slightly alkaline pH. It is a milky-white liquid with a low thickening effect and low viscosity. AERODISP® W 7520 N is used for stabilization for emulsions, adhesive promotion, anti-slip, anti-blocking, and surface treatment such as polishing. It also can be used for rheology control and and flocculation aid.
AERODISP® W 7520 NF
AERODISP® W 7520 NF is an aqueous dispersion of a hydrophilic fumed silica with an alkaline pH-value, which is recommended for food contact applications.
AERODISP® W 7520 P
AERODISP® W 7520 P is a low viscosity, water-based dispersionof AEROSIL® fumed silica, with a slightly alkaline pH.
AERODISP® WF 7620
AERODISP® WF 7620 is an aqueous dispersion containing 20 weight % active material of a functionalized AEROSIL®.
AERODISP® WR 8520
AERODISP® WR 8520 is a special, structured, highly filled dispersion of hydrophobic AEROSIL® fumed silica. It can be used for rheology control, anti-settling, pigment stabilization and improves the mechanical properties.
AEROSIL® 200
AEROSIL® 200 is a hydrophilic fumed silica with a specific surface area of 200 m²/g. With this product, rheology and thixotropy control of liquid systems, binders, and polymers is possible easily. It is also used to improve free flow and anti-caking characteristics of powders as well as an anti-settling, thickening, and anti-sagging agent. As ingredient it can be used in a broad variety of applications, like lipsticks, sulfate-free shampoos, mascara. The product is listed with the INCI-name 'Silica' and holds a COSMOS certification.
AEROSIL® 300
AEROSIL® 300 is a hydrophilic fumed silica with a specific surface area of 300 m²/g. AEROSIL® 300 has shown excellent transparency and rheology and thixotropy control of liquids, binders, and polymers. As ingredient it can be used in a broad variety of applications, like lipsticks, sulfate-free shampoos, mascara. The product is listed with the INCI-name 'Silica'.
AEROSIL® 380
AEROSIL® 380 is a hydrophilic fumed silica with a specific surface area of 380 m²/g. AEROSIL® 380 has excellent transparency and can be used for rheology and thixotropy control of liquids, binders, and polymers. It can also be used for reinforcement and as flow aid. As ingredient it can be used in a broad variety of applications, like lipsticks, sulfate-free shampoos, mascara. The product is listed with the INCI-name 'Silica'.
AEROSIL® 4200
AEROSIL® 4200 is a hydrophilic fumed silica with a specific 200 m²/g surface area. With this product, rheology and thixotropy control of liquid systems, binders, and polymers is easily possible. It is also used to improve the free flow and anti-caking characteristics of powders as well as an anti-settling, thickening, and anti-sagging agent.
AEROSIL® COK 84
AEROSIL® COK 84 is a formulated product with highly dispersed fumed aluminium oxide in the ratio of 5:1.
AEROSIL® E 805
AEROSIL® E 805 is a fumed silica after being treated with organosilane. It provides extraordinary rheological properties by keeping brilliant transparency. In addition, it is very easy to disperse.
AEROSIL® E 812
AEROSIL® E 812 is a fumed silica post-treated with organosilane (HMDS) and a high specific surface area combined with exceptional hydrophobicity. In addition, it is very easy to disperse.
AEROSIL® E 9200
AEROSIL® E 9200 is a structure-modified, hydrophobic fumed silica. Enables high loading levels at low viscosities. In addition, it is very easy to disperse.
AEROSIL® E 972
AEROSIL® E 972 is a fumed silica after being treated with DDS (dimethyldichlorosilane). It is a very efficient Rheology Modifier suitable for a broad range of applications while being very easy to disperse.
AEROSIL® MOX 80
AEROSIL® MOX 80 is a cofumed oxide consisting of silicon dioxide and approximately 1 % aluminium oxide, manufactured using the AEROSIL®-process.
AEROSIL® OX 50
AEROSIL® OX 50 is the fumed oxide of our portfolio with the smallest specific surface area. High chemical purity, distinct low thickening and agglomeration properties are typical characteristics.
AEROSIL® R 106
AEROSIL® R 106 is a hydrophobic fumed silica surface treated with D4 (octamethylcyclotetrasiloxane).
AEROSIL® R 202
AEROSIL® R 202 is a fumed silica after treated with a polydimethylsiloxane. It is used for adhesives and sealants, epoxy-, vinylester resins, cable gels, and gelcoats. AEROSIL® R 202 helps with the thickening and thixotropy of complex polar liquids based on epoxy, polyurethane, or vinylester resins. It also helps the thickening and thixotropy of cable gels for fiber optic cables.
AEROSIL® R 208
AEROSIL® R 208 is a fumed silica after treated with a polydimethylsiloxane. It is used for adhesives and sealants, epoxy-, vinylester resins, cable gels, and gelcoats. AEROSIL® R 208 helps with the thickening and thixotropy of complex polar liquids based on epoxy, polyurethane, or vinylester resins. It also helps the thickening and thixotropy of cable gels for fiber optic cables.
AEROSIL® R 7200
AEROSIL® R 7200 is a structure modified fumed silica after treated with methacrylsilane.
AEROSIL® R 805
AEROSIL® R 805 is a fumed silica aftertreated with an octylsilane based on AEROSIL® 200. AEROSIL® R 805 has effective rheology control in complex liquid sytems. It also can be applied in coatings systems as an anti-settling agent, for the stabilization of pigments, and to enhance the effect of corrosion protection, which makes it interesting for nail polish. In the personal care industry the AEROSIL® R 805 can be used as a rheology controller and stabilization aid in every kind of deodorants like sprays, roll-on and sticks. Its INCI-name is 'Silica caprylyl silylate'
AEROSIL® R 812
AEROSIL® R 812 is a fumed silica after-treated with organosilane (HDMDS) with high specific surface and marked hydrophobia.
AEROSIL® R 812 S
AEROSIL® R 812 S fumed silica after treated with HMDS based on AEROSIL® 300. AEROSIL® R 812 S can be applied in nail polish systems as an anti-settling agent, for the stabilization of pigments. In the personal care industry the AEROSIL® R 812 S can be used as a free flow agent and rheology controller. It is well known in products like styling agents (dry water) and dry shampoos. Using AEROSIL® R 812 S is also recommended for sprays (e.g. antiperspirant) and powder-to-cream applications (e.g. lipsticks). Its INCI-name is 'Silica silylate'
AEROSIL® R 816
AEROSIL® R 816 is hydrophilic and hydrophobic at the same time, and is a PEG-free way to stabilize (oil-in-water) emulsions. It is even bringing some more benefits in sensory modification like reduced gloss, improved spreadability, less tackiness, delayed dry feel. AEROSIL® R 816 is PCPC-listed as 'Silica cetyl silylate'.
AEROSIL® R 8200
AEROSIL® R 8200 is a structure-modified, highly hydrophobic fumed silica. Due to its low thickening efficiency, high loading levels at low viscosities are achievable.
AEROSIL® R 9200
AEROSIL® R 9200 is a structure modified, hydrophobic fumed silica.
AEROSIL® R 972
AEROSIL® R 972 is a fumed silica aftertreated with DDS (Dimethyldichlorosilane). It is used in silicone rubber and silicone sealants, paints and coatings, printing inks and toner, cable compounds and gels, adhesives, and plant protection. AEROSIL® R 972 has rheology control of complex liquid systems and is water resistant, hydrophobising of liquid systems. It is used in coatings as an anti-settling agent, for pigment stabilization and improvement of corrosion protection.
AEROSIL® R 972 V
AEROSIL® R 972 V is a densified hydrophobic fumed silica, after treated with DDS (Dimethyldichlorosilane). Due to the densification it shows a weaker rheological effect than AEROSIL® R 972.
AEROSIL® R 974
AEROSIL® R 974 is a fumed silica powder that offers an alternative technology to stabilize water/oil emulsions. Due to the special surface modification, there are both hydrophilic and hydrophobic groups on the surface of AEROSIL® R 974, which enables AEROSIL® R 974 to enrich at water and oil interfaces and thereby stabilize water droplets in a continuous oil phase by the Pickering effect. AEROSIL® R 974 is PCPC-listed as 'Silica dimethyl silylate'. The product is also very suitable for rheology control as well as an oil thickener.
AEROSIL® TT 600
AEROSIL® TT 600 is a fumed silica characterized by a particularly high degree of agglomeration. The combination of relatively high specific surface area coupled simultaneously with larger primary structures produces a unique profile of properties, which is different from all other silica grades in the portfolio. For instance, the product is recommended as a matting agent or anti-blocking additive with adsorption properties and high transparency.
AEROXIDE® ALU 130
AEROXIDE® ALU 130 is a very fine-particle fumed aluminum oxide with a very high specific surface area. The positive surface charge makes it ideal to control the electrostatic charge in powder coatings.
AEROXIDE® ALU C
AEROXIDE® ALU C is a very fine fumed metal oxide with a high specific surface area. Due to the electropositive chargability, this product leads to specific properties in various applications. It is used in PET-films as an anti-blocking agent and in fluorescent tubes and light bulbs as an additive for a homogenous light emission and better flowability of the the flourescent mix during the electrostatic coating .AEROXIDE® ALU C is also used in powder coatings to improve chargeabiltiy and in coatings of high quality ink-jet-paper to provide high gloss and excellent printing.
AEROXIDE® Alu C 805
AEROXIDE® Alu C 805 is a very fine pyrogenic Aluminium Oxide treated with octylsilane. It is used in powder coatings and toner to improve flowability and in plastic powders, such PVC, to prevent adhesion and agglomeration to protect the powders from moisture.
AIRASE® 5100
AIRASE® 5100 is a highly effective defoamer concentrate based on polyether siloxane technology. Excellent defoaming ability.
Airase® 5355 Defoamer
Airase® 5355 Defoamer is a relatively strong proprietary siloxane based defoamer designed to control and quickly eliminate foam without generating surface defects in waterbased pigment grinds, inks, overprint varnishes, adhesives and coatings. It does not contain added mineral oils, hazardous air pollutants (HAPs) or alkyl phenol ethoxylates (APEs). Airase® 5355 Defoamer is especially suited for waterbased applications requiring broad food contact compliances.
Airase® 8070 Deaerator
Airase® 8070 Deaerator is a proprietary, formulated, modified-siloxane deaerator designed to eliminate foam, pinholing, and solvent-popping problems in water-based coatings applied by airless (or air-assisted) spray technologies without generating surface defects. Airase® 8070 Deaerator can be especially effective against microfoam because it is designed to leave a defect-free surface, even when thick layers are applied or highly vicous coatings are sprayed. Airase® 8070 Deaerator contains no chemicals that are considered VOCs per the European Solvent Directive or the European Decorative Paint Directive; it contributes no VOCs nder EPA Method 24 testing conditions when evaluated at typical used levels (1% by weight) in a zero-VOC coating formulation. Additionally, Airase® 8070 Deaerator contains no added alkylphenol ethoxylates (APEs) or hazardous air pollutants (HAPs).
Lipotin® A
Lipotin® A is a wetting and dispersing additive based on soya lecithin for waterborne formulations. It helps the wetting of the pigments and gives additional stabilization.
Lipotin® DB
Lipotin® DB is a solvent-free, hazy liquid, soya lecithin used as a wetting and dispersing additive for solventborne coatings. It is also suitable for pigment concentrates and for direct grinds with binder. This product ensures proper wetting and stabilization of inorganic and organic pigments. It is recommended addition to architectural coatings, industrial coatings. (litho)offset printing inks, gravure inks, and UPE resin filling compounds and laminating resins. Phase separation may occur during storage of the product, but can be remixed by stirring. The application properties of the product are not affected.
NANOCRYL® C 130
NANOCRYL® C 130 is a clear to slightly yellow liquid, 50 wt.-% silica nanoparticles in cyclic trimethylolpropane formal acrylate. It is used for solventborne and solvent-free radiation-curing formulations. It has good flexibility and is applied in overprint varnishes and plastic top coats. This product has an enhanced scratch and abrasion resistance with no decrease of transparency. It has great adhesion on aluminum/glass, reduced cure shrinkage, and barrier effect. It also has adhesion on plastic, an anti-settling effect of filled formulations, and improved dirt shedding.
NANOCRYL® C 140
NANOCRYL® C 140 is a clear to slightly yellow liquid, 50 pbw silica nanoparticles in hexanedioldiacrylate. It has good UV-resistance, high flexibility, and is used for solventborne and solvent-free radiation-curing formulations. It also applied in overprint varnishes and plastic top coats. This product has enhanced scratch and abrasion resistance with no decrease of transparency. It has good adhesion on aluminum/glass, reduced cure shrinkage, and barrier effect. It also has improved dirt shedding.
NANOCRYL® C 150
NANOCRYL® C 150 is a clear to slightly yellow liquid, 50 wt.-% silica nanoparticles in trimethylolpropanetriacrylate (TMPTA) that is used for solventborne and solvent-free radiation-curing formulations. It has high surface hardness and high crosslinking density in overprint varnishes and plastic top coats. It has excellent enhanced scratch and abrasion resistance with no decrease of transparency. It has great adhesion on aluminum/glass, reduced cure shrinkage, and a barrier effect. It also has improved dirt shedding and adhesion on plastic.
NANOPOL® C 750
NANOPOL® C 750 shows very high performance in scratch- and abrasion-resistance without influencing the gloss or transparency of waterborne coatings.
NANOPOL® C 784
NANOPOL® C 784 shows the highest performance in scratch- and abrasion-resistance without influencing the gloss or transparency of the coating.
NANOPOX® C 620
NANOPOX® C 620 shows the highest performance in scratch- and abrasion-resistance without influencing the gloss or transparency of the cured cationic UV-coating.
ALBIDUR® 1223
ALBIDUR® 1223 is a reactive resin modifier. It offers high flexibility, excellent adhesion, chemical and solvent resistance, and good long-term persistence. This product is recommended for formulations with very low VOC-content.
ALBIDUR® EP 2240 A
ALBIDUR® EP 2240 A shows the highest performance in enhancing impact resistance without influencing chemical or corrosion resistance properties of pigmented epoxy coatings.
ALBIDUR® PU 5640
ALBIDUR® PU 5640 is a white liquid used in the primer/filler and top coat for waterborne, solventborne, and solvent-free 2-pack component polyurethane formulations. This product has an excellent increased tear and impact resistance. It also has good preservation of network density and no change in mechanical properties. ALBIDUR® PU 5640 has reduced cure shrinkage, improved dirt shedding, and barrier properties against water and diluted acids.
REWOPAL® M 365
REWOPAL® M 365 is a non-ionic wetting and dispersing additive for waterborne formulations. Helps the wetting of organic pigment. Can be used as co-disprsant in base paints.
SILIKOFTAL® HTF MPA/MBA
SILIKOFTAL® HTF MPA/MBA is a methoxy-functional silicone polyester resin. It shows high flexibility and low thermoplasticity. The product can be used in compliance with FDA 175.300 and BfR XV.
SILIKOFTAL® HTL
SILIKOFTAL® HTL is a methoxy-functional silicone polyester resin.
SILIKOFTAL® HTL 1
SILIKOFTAL® HTL 1 is a methoxy-functional silicone polyester resin. It is a cost-efficient resin with excellent adhesion to aluminum, steel, and stainless steel. The product can be used in compliance with FDA 175.300 and BfR XV.
SILIKOFTAL® HTL 3/MPA
SILIKOFTAL® HTL 3/MPA is a methoxy-functional silicone polyester resin. It shows an extraordinary yellowing resistance up to 250°C and a very good boiling water resistance. The product can be used in compliance with FDA 175.300 and BfR XV.
SILIKOFTAL® HTT
SILIKOFTAL® HTT is a silicone polyester resin for the production of decorative coatings. It is a clear to slightly hazy liquid used for non-stick coatings in combination with Polytetrafluoroethylene (PTFE) and decorative coatings of cookware, household appliances, and electric and gas heaters with a permanent thermal stability of 250°C. Some special features of SILIKOFTAL® HTT include excellent dishwasher detergent resistance, low yellowing, good gloss retention, and without addition of organotin-containing compounds.
SILIKOFTAL® NON-STICK 60
SILIKOFTAL® NON-STICK 60 is an ethoxy-functional silicone polyester resin for release coatings. The product can be used in compliance with FDA 175.300 and BfR XV.
SILIKOPHEN® AC 1000
SILIKOPHEN® AC 1000 is a low viscosity, solvent free methoxy-functional silicone resin. It offers curing at ambient temperature by catalysis and entering of humidity via a hydrolysis/condensation reaction. This product is suitable for anti-corrosion coatings, depending on the formulation. SILIKOPHEN® AC 1000 is recommended for high temperature applications for industrial facilities, power plants, incinerating plants, ventilators, turbines, silencers, ovens, chimneys, oven inserts, barbeques, and electric and gas heaters.
SILIKOPHEN® AC 900
SILIKOPHEN® AC 900 is a low viscosity methoxy-functional methyl phenylsilicone resin. It cures at ambient temperature by catalysis and entering of humidity via a hydrolysis/condensation reaction. It also features low smoke and odor development of the completely cured coating at temperature load. This product is suitable for anti-corrosion coatings for high temperature applications for industrial facilities, power plants, incinerating plants, ventilators, turbines, silencers, ovens, chimneys, oven inserts, barbeques, and electric and gas heaters.
SILIKOPHEN® P 40/W
SILIKOPHEN® P 40/W is a non-ionic dispersion, methylphenyl polysiloxane resin produced for heat-resistant decorative coatings. It has the appearance of a white, turbid liquid and is focused on high-temperature anti-corrosion coatings for mufflers, ovens, chimneys, oven inserts, barbeques, and electric and gas heaters. Some special features of SILIKOPHEN® P 40/W include excellent air-drying properties, water-reducible, and has good compatibility with organic polymer emulsions.
SILIKOPHEN® P 50/X
SILIKOPHEN® P 50/X is a methylphenyl polysiloxane resin produced for anti-corrosion coatings. It has an appearance of a clear to slightly hazy liquid used for anti-corrosion coatings for mufflers, ovens, chimneys, oven inserts, barbeques, and electric and gas heaters. It also can be used with metallic pigments and special formulations to obtain continuous heat-resistance of up to 650°C. Some special features of SILIKOPHEN® P 50/X include good compatibility with organic resins, and it has good air-drying properties.
SILIKOPHEN® P 80/X
SILIKOPHEN® P 80/X is a solvent-borne binder for heat-resistant anti-corrosion paints. It has an appearance of clear to slightly hazy liquid which is used for anti-corrosion coatings for mufflers, ovens, chimneys, oven inserts, barbeques, and electric and gas heaters. Some special features of SILIKOPHEN® P 80/X include excellent air-drying properties and good compatibility with organic resins. It also can be used with metallic pigments and special formulations to obtain continuous heat-resistance of up to 650 °C, but is limited miscibility with aromatic hydrocarbons.
SILIKOPHEN® P80/MPA
SILIKOPHEN® P80/MPA is a non-reactive methyl phenyl silicone resin. It is solvent-borne, good air-drying, and contains non aromatic solvents (BTX) variants. For low VOC formulations.
SILIKOPON® EF
SILIKOPON® EF is a silicone-epoxy resin for high temperature resistant corrosion protection coatings. It is a stoving resin and is distinguished by good adhesion and resistance to solvents. It can be used on concrete walls and floors and for roof tile, pipe lining, and commercial transport coatings. Some special features of SILIKOPON® EF includes extraordinary gloss retention and weather resistance, an anti-graffiti effect, excellent corrosion resistance, and is suitable for ultra high solids coatings.
SILIKOPUR® 8081
SILIKOPUR® 8081 is a silicone modified polyurethane dispersion. It provides a water-beading effect, offers extremely high flexibility, good recoatability, and good air-drying. This product is suitable for waterborne, clear coat, pigmented, direct grind, and 2-pack coatings.
SILIKOTOP® E 900
SILIKOTOP® E 900 is a branched hydroxyfunctional high-solid silicone-polyester. It is recommended for formulations with very low VOC content, < 250 g/L. It has a low processing viscosity at a very low solvent demand. It also has excellent stone-chipping and impact resistance, excellent appearance, and good pigment affinity, chemical resistance, and weather resistance.
SILIKOTOP® E 901
SILIKOTOP® E 901 is a branched hydroxyfunctional high-solid silicone-polyester. It is recommended for formulations with very low VOC content, < 250 g/L. It has a low processing viscosity at a very low solvent demand. It also has excellent stone-chipping and impact resistance, excellent appearance, and good pigment affinity, chemical resistance, and weather resistance.
SIPERNAT® 622 LS
SIPERNAT® 622 LS is an untreated, finely ground silica. This specialty silica provides good matting efficiency with minimal viscosity increase in printing ink applications.
SIPERNAT® 800
SIPERNAT® 800 is a precipitated synthetic sodium aluminosilicate that is manufactured in the USA. It is a versatile, cost-effective titanium dioxide extender for paints and coatings applications.
SIPERNAT® 820 A
SIPERNAT® 820 A is a sodium aluminium silicate. It is produced by a special precipitation and drying process and is employed as a partial replacement for titanium dioxide.
SIPERNAT® 833
SIPERNAT® 833 is a precipitated synthetic sodium aluminosilicate. It is a versatile, cost-effective titanium dioxide extender for paints and coatings applications.
SIPERNAT® 835
SIPERNAT® 835 is a precipitated synthetic sodium magnesium aluminosilicate that can be effective as a titanium dioxide extender for paints and coatings applications. It has proven particularly useful in high PVC formulations based on VAE or vinyl acrylic binders.
SIPERNAT® 898
SIPERNAT® 898 is a precipitated synthetic sodium aluminosilicate. It is a versatile, cost-effective titanium dioxide extender for paints and coatings applications.
SPHERILEX® DP-0110
SPHERILEX® DP-0110 has the smallest particle size within the SPHERILEX® family of products, making it ideal for thin film applications or systems where smaller particle-sized pigments are preferred to promote surface smoothness and higher 85-degree gloss. In particular, SPHERILEX® DP-0110 is ideal for achieving burnish-and scrub-resistant satin and eggshell finishes, and, when used in combination with silica matting agents, can enable deep matte, natural-looking wood coatings that have improved scratch, burnish, and mar resistance. It can also significantly improve the hardness of coil coatings.
SPHERILEX® DP-0111
SPHERILEX® DP-0111 is a precipitated amorphous (crystalline free) silica with unique spherical particle shape and very narrow particle size distribution.
SPHERILEX® DP-0112
SPHERILEX® DP-0112 is a precipitated amorphous (crystalline-free) silica with uniquely spherical particle shape and very narrow particle size distribution.
SPHERILEX® DP-0115
SPHERILEX® DP-0115 is a precipitated amorphous (crystalline-free) silica with uniquely spherical particle shape and very narrow particle size distribution.
SURFYNOL® 104
A nonionic surfactant that has multifunctional benefits, including wetting and foam control, in aqueous systems. 100% active solid.
SURFYNOL® 104 A
SURFYNOL® 104 A is a multifunctional surfactant providing combined dynamic wetting and molecular defoaming in waterborne coatings and inks.
SURFYNOL® 104 BC
SURFYNOL® 104 BC is a multifunctional surfactant providing combined dynamic wetting and molecular defoaming in waterborne coatings and inks.
Surfynol® 104 DPM
Surfynol® 104 DPM is a multifunctional surfactant providing combined dynamic wetting and molecular defoaming in waterborne coatings and inks.
Surfynol® 104 E
Surfynol® 104 E is a multifunctional surfactant providing combined dynamic wetting and molecular defoaming in waterborne coatings and inks.
Surfynol® 104 H
Surfynol® 104 H is a multifunctional surfactant providing combined dynamic wetting and molecular defoaming in waterborne coatings and inks.
Surfynol® 104 PA
Surfynol® 104 PA is a multifunctional surfactant providing combined dynamic wetting and molecular defoaming in waterborne coatings and inks.
Surfynol® 104 PG 50
Surfynol® 104 PG 50 is a multifunctional surfactant providing combined dynamic wetting and molecular defoaming in waterborne coatings and inks.
SURFYNOL® 104 S
SURFYNOL® 104 S is a free-flowing powder surfactant providing non yellowing and degassing for powder coatings.
Surfynol® 104 Z
SURFYNOL® 104 Z is a multifunctional surfactant providing combined dynamic wetting and molecular defoaming in waterborne coatings and inks.
Surfynol® 107 L
Surfynol® 107 L is a low-viscosity surfactant that provides substratre wetting and defoaming properties. It also acts as coalescing aid.
SURFYNOL® 118
SURFYNOL® 118 is a very compatible, formulated molecular defoamer/deaerator based on Gemini surfactant technology. It can be used for a wide variety of applications where pinhole elimination, macro-, and micro-foam control is needed without causing any film defects.
SURFYNOL® 2502
100% active, light yellow liquid that provides specific performance benefits in a broad range of water-based systems.
SURFYNOL® 355
SURFYNOL® 355 surfactant is a proprietary wetting agent designed to provide dynamic wetting without generating excess foam in waterbased pigment dispersions, inks, overprint varnishes, adhesives and coatings. It does not contain added mineral oils, hazardous air pollutants (HAPs), alkyl phenol ethoxylates (APEs) or acetylenic diols. This product is especially suited for waterbased applications requiring global food contact compliances.
SURFYNOL® 420
Nonionic surfactant that offers a unique combination of formulating benefits, including wetting, defoaming, and dispersion.
SURFYNOL® 440
Nonionic surfactant that offers a unique combination of formulating benefits, including wetting, defoaming, and dispersion.
SURFYNOL® 465
A nonionic, low-foaming surfactant that is utilized for its wetting and slight emulsification properties. It has a high cloud point for utilization in high-temperature systems. 100% active liquid with an HLB of 13.
Surfynol® 485 W
Surfynol® 485 W is a low-viscosity substrate wetting agent for waterborne coatings and inks with high solubility in aqueous systems. It can also be used for its stabilization and emulsification properties.
Surfynol® AD-01
Surfynol® AD 01 is multi-functional gemini surfactant combining dynamic wetting and molecular defoaming. Surfynol® AD 01 also acts as a coalescing aid.
Surfynol® DF-110 D
Surfynol® DF 110 D is a very compatible molecular defoamer basedon Gemini surfactant technology. Free of silicone and silica. Offers additional dynamic wetting properties.
Surfynol® DF-110BC Defoamer
Surfynol® DF-110BC defoamer is a highly effective, nonionic, molecular defoamer and deaerator. This defoaming/deairentraining agent can be used for a wide variety of applications where foam prevention or foam elimination is necessary without causing surface defects.
Surfynol® MD 20
Surfynol® MD 20 is a multifunctional defoamer it provides a combination of foam control and dynamic wetting, with the potential to reduce overall additive levels, while minimizing surface defects. Surfynol® MD 20 is exceptionally effective at eliminating microfoam and other foam related defects in waterborne systems when used as a foam control agent. It is 100% active, solvent-free, clear liquid. It is free of silicone and hydrophobic silica. It is temperature and pH stable (pH 1-13). Applications include, coatings, graphic arts, adhesives, dye and pigment synthesis, pigment grinding, oil and gas processing, cleaning products, metalworking fluids, cements, mortars and grouts and personal care.
Surfynol® PSA-336
Surfynol® PSA-336 is a powerful solvent-free wetting agent with moderate foaming tendencies. Surfynol® PSA-336 surfactant is for use in pressure-sensitive and laminating adhesives.
SURFYNOL® SE-F
SURFYNOL® SE-F is a self-emulsified surfactant that combines excellent wetting properties with good foam control and ease of incorporation in waterborne coatings and inks.
TEGO® AddBond 2220 ND
TEGO® AddBond 2220 improves flexibility and adhesion of solventborne coatings. This soft polyester shows very good compatibility in non-polar formulations.
TEGO® AddBond 2325
TEGO® AddBond 2325 is a liquid solution of a modified special polyester in n-butyl acetate for solventborne formulations. This product has good adhesion improvement on metal and plastic. It also has good flexibility, viscosity reduction, increase of solids content, and a fixation of aluminum pigments. It also improves the corrosion protection, and is widely compatible, particularly with polyacrylates.
TEGO® AddBond DS 1300
TEGO® AddBond DS 1300 improves adhesion of waterborne coatingson steel, galvanized steel, aluminum, and plastics.
TEGO® AddBond HS
TEGO® AddBond HS improves adhesion and flexibility of solventborne coatings on steel, galvanized steel, aluminum, and plastics. It is highly suitable for high-solid coatings.
TEGO® AddBond HS MPA
TEGO® AddBond HS improves adhesion and flexibility of solventborne coatings on steel, galvanized steel, aluminum, and plastics. It is highly suitable for high-solid coatings.
TEGO® AddBond LP 1600
TEGO® AddBond LP 1600 is a solvent-free adhesion resin. It improves intercoat adhesion, increases the solids content, improves gloss, and offers wide solubility and compatibility. This product is recommended for can and coil coatings and industrial coatings.
TEGO® AddBond LP 1611
TEGO® AddBond LP 1611 is a solvent-free adhesion resin. It improves the intercoat adhesion, corrosion protection, and gloss. This product offers excellent adhesion improvement on aluminium, steel and galvanized steel, as well as plastics, PVC, and ABS. It is recommended for can and coil coatings, industrial coatings, and 2-pack coatings.
TEGO® AddBond LTH
TEGO® AddBond LTH improves adhesion of coatings on metal and plastic substrates. It does not soften the coating film and can be used for solventborne, solvent-free, and radiation-curing coating systems
TEGO® AddBond LTW
TEGO® AddBond LTW improves adhesion and flexibility of solventborne coatings on steel, galvanized steel, aluminum, and plastics.
TEGO® AddBond LTW-B
TEGO® AddBond LTW-B improves adhesion and flexibility of solventborne coatings on steel, galvanized steel, aluminum, and plastics.
TEGO® Airex 900
TEGO® Airex 900 is an organo-modified polysiloxane, containing fumed silica. This product is an excellent defoamer and deaerator for solvent-based, solvent-free and radiation curing coating systems. It is a liquid and has outstanding performance particularly in higher viscosity formulations. TEGO® Airex 900 is recommended to use for self-leveling floor coatings and to be applied by brush, roller, or airless spraying.
TEGO® Airex 901 W
TEGO® Airex 901 W is a polyether siloxane copolymer, containing fumed silica. This product is an excellent defoamer and deaerator concentrate. It has excellent effectiveness against micro- and macro-foam in airless and airmix applications. TEGO® Airex 901 W is used particularly for waterborne and high viscosity formulations. It is also recommended for flexo and gravure printing, and to be applied by brush, roller, or airless spraying.
TEGO® Airex 901 W N
TEGO® Airex 901 W N is a highly effective deaerator concentrate based on polyether siloxane technology. Outstandingly effective against micro-foam in a variety of applications.
TEGO® Airex 902 W
TEGO® Airex 902 W is a highly compatible deaerator emulsion of a polyether siloxane copolymer, containing fumed silica. This product is effective against micro- and macro-foam. TEGO® Airex 902 W is highly suitable for airless spraying and compressed air spraying applications as well as for brush and roller applications. It is also recommended for use in self-leveling floor coatings.
TEGO® Airex 902 W N
TEGO® Airex 902 W N is a highly effective and compatible deaerator emulsion based on polyether siloxane technology. Outstandingly effective against micro- and macro-foam.
TEGO® Airex 904 W
TEGO® Airex 904 W is a polyether siloxane copolymer, containing fumed silica. This product is an effective deaerator concentrate to eliminate micro-foam. TEGO® Airex 904 W has a good balance of compatibility and effectiveness. It is highly suitable for airless spraying applications. It is also suitable for compressed air spraying and brush/roller applications. Haziness, caused by low temperatures, is reversible and does not affect the performance properties of TEGO® Airex 904 W.
TEGO® Airex 904 W N
TEGO® Airex 904 W N is a very effective deaerator concentrate based on polyether siloxane technology. Very effective against micro-foam. Offers good compatibility.
TEGO® Airex 910
TEGO® Airex 910 is a highly compatible defoamer and deaerator for both solvent-free and solvent-based coating systems. It can be post added and is ideally suited for use in clearcoats. TEGO® Airex 910 is suitable for airless spraying as well as dip coating, flow coating, and curtain coating. It is also suitable for self-leveling floor coating and brush and roller applications.
TEGO® Airex 920
TEGO® Airex 920 is a highly compatible deaerator concentrate for radiation-curing coating systems. It is a liquid organic polymer and silicone-free. This product has universal use in clear and pigmented formulations. TEGO® Airex 920 is highly suitable for flexo and gravure printing. It is also suitable for compressed air spraying, as well as for dip coating, flow coating, and curtain coating
TEGO® Airex 921
TEGO® Airex 921 is a liquid, silicone-free, organic polymer for universal use in clear, pigmented, and especially for radiation-curing formulations. It is also highly suitable for compressed air spraying and flexo/gravure printing. The addition of this product, may be either in the grind or during the let-down procedure. It may be used at temperatures above 15°C.
TEGO® Airex 922
TEGO® Airex 922 is a highly compatible defoamer and deaerator concentrate for solventborne coatings. Supplied as a liquid, it's formulation is based on deaerating polymers and is very strong with solvent-free epoxy high-build coatings. TEGO® Airex 922 is highly suitable for self-leveling floor coatings. It is also suitable for brush/roller applications, as well as airless and compressed air spraying.
TEGO® Airex 923
TEGO® Airex 923 is a silicone-free deaerator concentrate that provides outstanding compatibility. Fast and efficient foam breakdown.
TEGO® Airex 931
TEGO® Airex 931 is a 4-Heptanone, 2,6-dimethyl-solution of a fluoro-silicone. It is universally used in solventborne formulations. It is also highly effective against macro-foam but still compatible. TEGO® Airex 931 is highly suitable for self-leveling floor coating and compressed air spraying. It is also suitable for flexo/gravure printing, airless spraying, and brush and roller applications.
TEGO® Airex 940
TEGO® Airex 940 shows good compatability combined with effectiveness against both micro- and macro-foam. Ideally suited for high-solid and 2K solvent-free formulations.
TEGO® Airex 944
TEGO® Airex 944 is a deaerator for solvent-free and solvent-borne coating formulations based on deaerating organic polymers. It used particularly for pigmented formulations. It is highly effective at preventing micro- and macro-foam. TEGO® Airex 944 can be applied for wood and furniture coatings and floor coatings based on 2-pack polyurethane formulations and based on amine/amide-curing epoxides.
TEGO® Airex 960
TEGO® Airex 960 is a deaerator for solvent-free and solvent-borne coating formulations based on deaerating organic polymers. It is used particularly for pigmented formulations. It is highly effective at preventing micro- and macro-foam. TEGO® Airex 960 can be applied for wood and furniture coatings and floor coatings based on 2-pack polyurethane formulations and based on amine/amide-curing epoxides.
TEGO® Airex 971
TEGO® Airex 971 was designed for radiation-curing formulations.Provides good compatibility and very fast foam breadown.
TEGO® Airex 978
TEGO® Airex 978 is a very strong deaerator concentrate that provides excellent effectiveness against micro- and macro-foam in solvent-borne, radiation-curing, and high-solids coatings and inks. Very suitable for high build and high viscosity applications.
TEGO® Airex 990
TEGO® Airex 990 is a deaerator for solventborne coating formulations. It is used for industrial coatings, wood and furniture coatings, coatings for plastics, and leather top coats. TEGO® Airex 990 is highly suitable for high solids coatings formulations as well as for solventborne and solvent-free formulations. It helps prevent pinholes and popping, is highly compatible, has good recoatability, and is highly suitable for clears. It is also suitable for alkyd and UV systems.
TEGO® Airex 991
TEGO® Airex 991 deaerator for solvent-free and solventborne coating formulation based on deaerating organic polymers, with tip of silicone. It is recommended for industrial coatings and 2-pack coatings based on epoxies and polyurethanes. TEGO® Airex 991 has good recoatability, is highly effective, prevents micro- and macro-foam, and is used particularly for pigmented formulations.
TEGO® Color Aid 7060
TEGO® Color Aid 7060 is a compatibilizer for improvement of the color acceptance of waterborne universal colorants in solventborne paints based on alkyd resins. It is suitable for many organic and inorganic pigments and shows only little influence on the drying time of the paint.
TEGO® Color Aid 7062
TEGO® Color Aid 7062 is a compatibilizer for solventborne base paints. It can be post added to low polar base paints and helps the color acceptance of universal colorants.
TEGO® Color Aid 7066
TEGO® Color Aid 7066 is a wetting and dispersing additive for waterborne formulations. It can be post added to the paint and helps the color strength development and color acceptance, so it works like a compatibilizer. When used as main dispersant, TEGO® Color Aid 7066 stabilizes inorganic pigments, especially iron oxide black.
TEGO® Cure 100
TEGO® Cure 100 is a reactive ambient curing polysiloxane resin, pre-catalysed with amines, for the use as hardener.
TEGO® Dispers 1010
TEGO® Dispers 1010 is a wetting and dispersing additive for solventborne coatings. It has outstanding pigment wetting and viscosity reduction properties for ceramic inkjet inks. This product is especially suitable for inorganic pigments in unpolar solvents. It leads to a newtonian flow behavior.
TEGO® Dispers 628
TEGO® Dispers 628 is a wetting and dispersing additive for solventborne coatings. It is a clear to slightly hazy liquid solution of a high molecular weight polymer. TEGO® Dispers 628 is used for automotive and industrial coatings wood and furniture coatings solventborne pigment preparations inkjet inks. It is suitable for pigment concentrates and for direct grinds (with binder). It is used particularly for inorganic pigments improving the flow and gloss due to pigment deflocculation. It has outstanding viscosity reduction and excellent colorant acceptance.
TEGO® Dispers 650
TEGO® Dispers 650 is a wetting and dispersing additive. It is a yellowish to brownish liquid modified polyether with groups of high pigment affinity. TEGO® Dispers 650 is used for the manufacture of universal colorants and for organic pigments and carbon blacks. It has a very good development of color strength and is solvent- and APE-free. This product can also be used for even lower viscosity but slightly weaker color strength.
TEGO® Dispers 651
TEGO® Dispers 651 is a pigment-wetting and dispersing additive. It is a yellowish to brownish liquid modified polyether with groups of high pigment affinity. TEGO® Dispers 651 has very good reduction of viscosity and is solvent- and APE-free. It is used for the manufacture of universal colorants, for inorganic and organic pigments and also for architectural paints.
TEGO® Dispers 652
TEGO® Dispers 652 is a solvent- and APE-free pigment-wetting and dispersing additive. It is a clear to slightly hazy liquid concentrate of a fatty acid derivative. This product is for waterborne, solventborne, and radiation-curing formulations. Based on sustainable raw materials, TEGO® Dispers 652 reduces millbase viscosity and has good color intensity and gloss with inorganic pigments and fillers. This product can also be used for resin-based and resin-free pigment concentrates.
TEGO® Dispers 653
TEGO® Dispers 653 is a clear liquid, modified polyether with groups of high pigment affinity used as a wetting and dispersing additive for waterborne formulations. It is also used for the manufacture of universal colorants, architectural paints, as well as inorganic and organic pigments. It offers very good reduction of viscosity and is both solvent- and APE-free.
TEGO® Dispers 655
TEGO® Dispers 655 is pigment-wetting and dispersing additive. It is a clear to a slighlty hazy brownish liquid modified polyether with groups of high pigment affinity. This product is used for universal colorants, waterborne, solventborne, radiation-curing formulations. TEGO® Dispers 655 stabilizes aluminum pigments and improves colorant acceptance of solventborne paints. It has the highest viscosity reduction with inorganic pigments and fillers and good reduction with organic and carbon blacks. It also has good color intensity/gloss with inorganic pigments and fillers.
TEGO® Dispers 656
TEGO® Dispers 656 is a clear to hazy liquid, modified polyether with groups of high pigment affinity used as a pigment-wetting and dispersing additive. This product is primarily used for universal colorants and solventborne formulations. It is solvent- and APE-free and has the highest efficiency with inorganic pigments. It also stabilizes aluminum pigments and improves colorant acceptance of solventborne paints.
TEGO® Dispers 658
TEGO® Dispers 658 is a non-ionic wetting and dispersing additive that can be used in waterborne formulations and in universal colorants. It provides excellent pigment wetting and color strength development, especially for organic pigments.
TEGO® Dispers 670
TEGO® Dispers 670 is a wetting and dispersing additive or solventborne coatings. It is a yellowish to brownish liquid solution of a high molecular weight polymer. This product is used for inkjet inks, solventborne pigment preparations, automotive and industrial coatings, and wood and furniture coatings. Suitable for pigment concentrates and for co-grinds, TEGO® Dispers 670 has excellent pigment wetting of organic and inorganic pigments as well as carbon black. It has outstanding viscosity reduction and improves flow and gloss due to pigment deflocculation.
TEGO® Dispers 671
TEGO® Dispers 671 is a polymeric wetting and dispersing additive for solventborne formulations. Provides high color strength, especially with organic pigments. Dispersions of carbon black pigments show a low viscosity and a blueish undertone.
TEGO® Dispers 672
TEGO® Dispers 672 is a polymeric wetting and dispersing additive for solvent-borne formulations. Provides high color strength, especially with organic pigments. Dispersions of carbon black pigments with show a low viscosity and a blueish undertone. Free of aromatic solvents.
TEGO® Dispers 673
TEGO® Dispers 673 is a wetting and dispersing additive for solventborne coatings. It is a high performance additives for high jetness in combination with good color strength development. This product is suitable for xylene containing formulations.
TEGO® Dispers 675
TEGO® Dispers 675 is a wetting and dispersing additive for solventborne coatings. It is a polymeric additive especially for coil coating formulations. It combines outstanding image of clarity (doi) and gloss with good color stregnth, flocculation stability and good effectivity against flooding and floating.
TEGO® Dispers 679
TEGO® Dispers 679 is a wetting and dispersing additive for solventborne formulations. It shows very high color strength, especially with organic pigments and carbon blacks. It is suitable also for inorganic pigments.
TEGO® Dispers 685
TEGO® Dispers 685 is a clear to hazy liquid high molecular weight polymer. It is a widely applicable wetting and dispersing additive suitable for radiation-curing and solventborne high-solids formulations. It is especially suitable for organic pigments and mixed pigmentations with outstanding viscosity reduction and color intensity/gloss. It also provides viscosity reduction and color intensity/gloss for inorganic pigments/fillers.
TEGO® Dispers 686
TEGO® Dispers 686 is a pigment-wetting and dispersing additive. It is especially suitable to prepare solventborne concentrates of matting agents. The dried concentrate of matting agent can be re-dispersed at low shear force.
TEGO® Dispers 688
TEGO® Dispers 688 is a clear to slightly hazy liquid, high molecular weight polymer. It is a wetting and dispersing additive for radiation-curing formulations and for matte UV coatings. It stabilizes matting agents and has outstanding viscosity reduction. TEGO® Dispers 688 gives positive impact on the rheological profile of the UV coatings even at high matting agent levels. During production and application of matte UV coatings, improved processing of this product is achieved.
TEGO® Dispers 689
TEGO® Dispers 689 promotes the incorporation of matting agents in radiation-curing formulations. It enables strong matting effect and is solvent-free.
TEGO® Dispers 690
TEGO® Dispers 690 is a high molecular weight polymer used as a pigment wetting and dispersing additive. It is designed specifically for solventborne printing inks used in food packaging. By using this product in solventborne, PU-containing or binder-free pigment dispersions, high pigment loadings can be achieved due to strong viscosity reduction. TEGO® Dispers 690 is highly compatible with various PU and NC binder types and works well with organic pigments, carbon blacks and titanium dioxide. It is also especially effective in gravure and flexo inks for lamination applications.
TEGO® Dispers 691
TEGO® Dispers 691 is a highly efficient polymeric wetting and dispersing additive for solventborne formulations. It gives outstanding wetting and stabilization to both organic and inorganic pigments in solventborne printing inks.
TEGO® Dispers 705
TEGO® Dispers 705 is a wetting and dispersing additive for solventborne formulations. Stabilitzes inorganic pigments, fillers and bentonites. Can be used to produce very stable and easy to handle pastes of bentonites.
TEGO® Dispers 710
TEGO® Dispers 710 is a polymeric high performance wetting and dispersing additive for organic and inorganic pigments. It is clear to slightly hazy liquid solution of a basic urethane copolymer. TEGO® Dispers 710 is broadly compatible. It has very high color intensity/gloss and good viscosity reduction with inorganic pigments and fillers as well as organic pigments and carbon blacks.
TEGO® Dispers 711 W
TEGO® Dispers 711 W is an anionic wetting and dispersing additive for waterborne formulations. It is especially suitable for inorganic pigments and fillers and combines very good viscosity reduction with enhanced colorant acceptance.
TEGO® Dispers 712 W
TEGO® Dispers 712 W is an anionic wetting and dispersing additive for waterborne formulations. It is especially suitable for inorganic pigments and fillers and combines very good viscosity reduction with enhanced colorant acceptance.
TEGO® Dispers 715 W
TEGO® Dispers 715 W is a yellowish clear liquid solution of a sodium polyacrylate for direct grind and waterborne formulations. It has particularly strong reduction of viscosity with inorganic pigments and fillers. It is excellently suitable for use in the millbase of emulsion paints and architectural paints. This product is clearly soluble in water.
TEGO® Dispers 717 W
TEGO® Dispers 717 W is an anionic wetting and dispersing additive for waterborne formulations. It combines very good viscosity reduction when used with inorganic pigments and enhanced compatibility of tinted paints.
TEGO® Dispers 740 W
TEGO® Dispers 740 W is a pigment-wetting and dispersing additive. It is a non-ionic, modified fatty acid derivative; aromatic-, amine- and alkylphenolethoxylate-free, yellowish, clear to slightly hazy liquid. Based on sustainable raw materials, TEGO® Dispers 740 W wets and stabilizes organic and carbon black pigments in pigment concentrates. It also improves colorant acceptance when used in the millbase of emulsion paints. For inorganic pigment concentrates, the addition of rheology modifiers such as fumed silica has proven to be beneficial when formulating this product.
TEGO® Dispers 741 W
TEGO® Dispers 741 W is an anionic wetting and dispersing additive for waterborne dispersions. Stabilizes inorganic and organic pigments for interior applications. Shows good color strength with organic pigments.
TEGO® Dispers 747 W
TEGO® Dispers 747 W is a novel dispersing additive for inorganic pigments. It offers outstanding viscosity reduction in pigment concentrates which enables the manufacturer to achieve higher pigment loading. TEGO® Dispers 747 W improves efficiency by its ability to increase pigment loading at lower workable viscosities. It also reduces complexity due to its ability to bind and stabilize nearly all inorganic pigments with one dispersant. TEGO® Dispers 747 W can be used for the preparation of waterborne pigment concentrates, as well as for the direct grind of inorganic pigments for architectural coatings.
TEGO® Dispers 750 W
TEGO® Dispers 750 W is a polymeric high performance wetting and dispersing additive with outstanding pigment stabilization. It is a yellowish clear liquid aqueous solution of a copolymer with groups of high pigment affinity. TEGO® Dispers 750 W wets and stabilizes all types of pigment with good compatibility and hardly affects stability. It is suitable for waterborne, direct grind, resin-free, and resin based pigment concentrates.
TEGO® Dispers 752 W
TEGO® Dispers 752 W is a polymeric wetting and dispersing additive, especially for transparent iron oxides and transparent titanium dioxide. It is a solvent-free, yellowish clear liquid aqueous solution of a copolymer with groups of high pigment affinity. TEGO® Dispers 752 W has very good reduction in viscosity and high brilliance with inorganic pigments. It also has good color intensity/gloss and low foam.
TEGO® Dispers 755 W
TEGO® Dispers 755 W is a polymeric wetting and dispersing additive with outstanding viscosity reduction. It is a solvent-free. clear liquid aqueous solution of a copolymer with groups of high pigment affinity. TEGO® Dispers 755 W wets and stabilizes all types of pigment. It generates pigment concentrates with very low viscosity, good compatibility and high storage stability. It also has very good weathering resistance.
TEGO® Dispers 757 W
TEGO® Dispers 757 W is a polymeric high performance wetting and dispersing additive with outstanding water resistance. It is a clear to slightly hazy liquid aqueous solution of a copolymer with groups of high pigment affinity. TEGO® Dispers 757 W is used for waterborne, direct grind, resin-free, and resin-based pigment concentrates with high color strength and low influence on coatings properties. It also has high viscosity reduction with both inorganic and organic pigments.
TEGO® Dispers 760 W
TEGO® Dispers 760 W is a wetting and dispersing additive with outstanding pigment wetting properties and viscosity reduction of the grind. It is solvent-free, clear to slightly hazy liquid waterborne solution of surface active substances and polymers with groups of high pigment affinity. TEGO® Dispers 760 W offers optimum wetting of organic and carbon black pigments in binder-containing dispersions. It reduces viscosity and increases color strength.
TEGO® Dispers 761 W
TEGO® Dispers 761 W is a pigment-wetting and dispersing additive that offers optimum wetting of organic and carbon black pigments in binder-containing dispersions. It also reduces viscosity and increases color strength.
TEGO® Dispers 765 W
TEGO® Dispers 765 W is a wetting and dispersing additive for waterborne printing inks. In binder-free millbases, it shows good wetting and stabilization properties with organic pigments.
TEGO® Dispers 780 W
TEGO® Dispers 780 W is a polymeric, slightly anionic wetting and dispersing additive for high-quality waterborne ink formulations. It is an excellent choice for resin-containing, resin-reduced as well as resin-free grinds. TEGO® Dispers 780 W provides excellent pigment stabilization for organic and inorganic pigments.
TEGO® Effect 9305
TEGO® Effect 9305 is a cationic/non-ionic emulsion of an organo-siloxane in combination with a silicone quat.
TEGO® Flow 300
TEGO® Flow 300 compatible flow and leveling additive. It is a clear liquid solution of a polyacrylate. It has good flow promotion in clear coat, pigmented, and solventborne systems. TEGO® Flow 300's flow promotion does not affect surface energy nor surface slip. It is used as the primer/basecoat and topcoat for lacquer coats. It has clear solubility in ethanol, white spirit, butyl acetate, and tripropylene glycol diacrylate (TPGDA).
TEGO® Flow 370
TEGO® Flow 370 is a silicone-free acrylic leveling agent and shows excellent compability and flow promotion with additional defoaming properties. It is highly recommended for solventborne coatings especially for clear coatings.
TEGO® Flow 375
TEGO® Flow 375 is a highly compatible aromatic-free flow additive based on polyacrylate. It has excellent compatibility and flow promotion in clear coat, pigmented, solventborne, and high solids formulations. This of course does not affect the product's surface energy or slip. It is used as the primer/basecoat and as the topcoat for lacquer coats, and is soluble in ethanol, white spirit, butyl acetate, and tripropylene glycol diacrylate (TPGDA).
TEGO® Flow 380
TEGO® Flow 380 is a silicone-free acrylic leveling agent and shows good compatibility and flow promotion with additional anti-popping properties. It is highly recommended for solvent-borne coatings, especially clear coatings.
TEGO® Flow 425
TEGO® Flow 425 is a highly compatible flow and leveling additive with weak glide effect. It is a clear liquid which becomes hazy and thickens at temperatures below 18 °C. It returns to clear and becomes pourable after warming. This does not affect the performance properties of the product. TEGO® Flow 425 is universally applicable and recoatable for flow promotion of clear coat, pigmented, radiation-curing, solventborne systems..
TEGO® Flow ATF 2
TEGO® Flow ATF 2 shows highly effective anti-crater properties for solventborne coatings. It ensures wetting even on insufficiently cleaned or contaminated substrates.
TEGO® Foamex 10
TEGO® Foamex 10 is a defoamer emulsion for waterborne formulations. It is suitable for ecolabel compliant formulations. This product offers very strong defoaming, especially for pigmented high-viscosity formulations. It is an alternative to mineral oil defoamers, and can be used for paints of medium to high PVC and for stuccos.
TEGO® Foamex 11
TEGO® Foamex 11 is a highly efficient, especially low-VOC defoamer emulsion based on polyether siloxane technology. Developed for architectural paints.
TEGO® Foamex 1488
TEGO® Foamex 1488 is a highly effective defoamer emulsion. It is a white, thixotropic liquid emulsion of a polyether siloxane copolymer containing fumed silica. TEGO® Foamex 1488 has very strong defoaming, with foam-inhibiting, characteristics. It is universally applicable for clear coat, pigmented, and waterborne systems. This product is highly suitable for dip coating, flow coating, curtain coating and flexo and gravure printing. It is also suitable for compressed air spraying and for brush and roller applications.
TEGO® Foamex 18
TEGO® Foamex 18 is a compatible defoamer concentrate based on organic polymer technology. Free of silicone, solvent, and mineral oil.
TEGO® Foamex 2
TEGO® Foamex 2 is a cost-effective emulsion defoamer based on hydrocarbon compounds combining good defoaming and compatibility for water-based paints. TEGO® Foamex 2 is silicone-free and silica-free.
TEGO® Foamex 20
TEGO® Foamex 20 is a defoamer emulsion. It is suitable for ecolabel compliant formulations. This product offers very strong defoaming with foam-inhibiting characteristics, universal applicability. It is recommended for clear and pigmented waterborne formulations.
TEGO® Foamex 24
TEGO® Foamex 24 is a defoamer emulsion. It is suitable for ecolabel compliant formulations. This product offers very strong defoaming with foam-inhibiting characteristics, universal applicability. It can be used in clear and pigmented waterborne coatings.
TEGO® Foamex 26
TEGO® Foamex 26 is a defoamer concentrate. It is suitable for ecolabel compliant formulations. This product is a universal defoamer for the mill base, and it prevents micro- and macro-foam.
TEGO® Foamex 27
TEGO® Foamex 27 is an effective defoamer concentrate based on polyether siloxane technology. Universal grinding stage defoamer. Can be used in the let-down with sufficient shear. Prevents macro-and micro-foam.
TEGO® Foamex 3062
TEGO® Foamex 3062 is highly effective defoamer concentrate for waterborne systems. It is a slightly hazy liquid polyether siloxane copolymer containing fumed silica. TEGO® Foamex 3062 has a very strong defoaming and foam-destruction effect in millbases and high-viscosity formulations. It is highly suitable for flexo and gravure printing as well as brush and roller applications. It can also be applied with airless spraying.
TEGO® Foamex 32
TEGO® Foamex 32 is a defoamer concentrate. It is suitable for ecolabel compliant formulations. This product offers strong defoaming in millbases and high viscosity formulations, particularly for pigmented formulations with a high filler content.
TEGO® Foamex 6
TEGO® Foamex 6 is an efficient concentrate defoamer for water-based paints with good long-term stability. TEGO® Foamex 6 is silicone- and silica-free.
TEGO® Foamex 800
TEGO® FOAMEX 800 is a defoamer emulsion with good compatibility and easy incorporation. It is a white, thixotropic liquid emulsion of a polyether siloxane copolymer, containing fumed silica. A universal let-down defoamer for low pigment content formulations and clear coats, TEGO® Foamex 800, is easily incorporated, especially for polyurethane formulations. It is highly suitable for dip coating, flow coating, and curtain coating as well as brush and roller applications.
TEGO® Foamex 8030
TEGO® Foamex 8030 is a highly effective defoamer emulsion for waterborne systems, especially for a PVC range of 20 to 60%. It is a white, thixotropic liquid emulsion of a polyether siloxane copolymer, containing fumed silica. TEGO® Foamex 8030 has very strong defoaming, especially for pigmented high-viscosity formulations. It is suitable for brush and roller applications as well as compressed air spraying and flexo/gravure printing.
TEGO® Foamex 805 N
TEGO® Foamex 805 N defoamer emulsion with a broad application range, outstanding compatibility and easy incorporation. It is a white, thixotropic liquid emulsion of a polyether siloxane copolymer. As a universal let-down defoamer for low pigment content formulations and clear coats, TEGO® Foamex 805 N is easily incorporated especially for polyurethane formulations. It is well suited for post-addition, and for flexo/gravure printing and dip coating, flow coating, and curtain coating.
TEGO® Foamex 8050
TEGO® Foamex 8050 is a highly effective defoamer concentrate based on polyether siloxane technology. Highly suitable as grinding defoamer.
TEGO® Foamex 810
TEGO® Foamex 810 is a compatible and highly effective defoamer concentrate for the grinding and let-down stage. It is a slightly hazy liquid polyether siloxane copolymer, and contains fumed silica. TEGO® Foamex 810 is universally applicable as a millbase defoamer. It has a good effectiveness against micro-foam when used in the let-down stage. It is highly suitable for compressed air spraying and for flexo/gravure printing. It also for airless spraying and brush/roller applications.
TEGO® Foamex 811
TEGO® Foamex 811 is an effective defoamer concentrate based on polyether siloxane technology. Universal grinding stage defoamer. Can be used in the let-down with sufficient shear. Prevents macro-and micro-foam.
TEGO® Foamex 812
TEGO® Foamex 812 is an effective defoamer concentrate based on polyether siloxane technology. Universal grinding stage defoamer. Can be used in the let-down with sufficient shear. Prevents macro-and micro-foam.
TEGO® Foamex 815 N
TEGO® Foamex 815 N is a defoamer emulsion with a broad application range and excellent effectiveness. It is a white, thixotropic liquid emulsion of a polyether siloxane copolymer which contains fumed silica. TEGO® Foamex 815 N has strong defoaming characteristics with very good compatibility. It is widely applicable, particularly in formulations based on acrylate, styrene-acrylate or 2- pack epoxy binders. It is highly suitable for flooring applications and is also suitable for brush/roller applications.
TEGO® Foamex 822
TEGO® Foamex 822 is a defoamer emulsion with a broad application range, easy incorporation, and good long-term effectiveness. It is a white, thixotropic liquid emulsion of a polyether siloxane copolymer which contains fumed silica. TEGO® Foamex 822 has strong long-term defoaming. It is well suited for clearcoats, waterborne, and sensitive systems. It is highly suitable for brush/roller applications, compressed air spraying, and dip, flow, and curtain coating. It is also suitable for airless spraying and flexo/gravure printing.
TEGO® Foamex 823
TEGO® Foamex 823 is a white, thixotropic liquid defoamer emulsion. It is used for waterborne architectural coatings, decorative coatings, industrial coatings, and pigmented coatings based on elastic polymer emulsions, e.g. roof tile coatings. Some special features of TEGO® Foamex 823 are that it can be used universally in clear and pigmented formulations, and it is highly effective, particularly for waterborne formulations. The long-term effectiveness of this product is dependent on the formulation and should be tested in the individual formulation.
TEGO® Foamex 825
TEGO® Foamex 825 is an effective defoamer emulsion with high compatibility. It is a white, thixotropic liquid emulsion of a polyether siloxane copolymer which contains fumed silica. TEGO® Foamex 825 has strong defoaming characteristics for clear coat, pigmented, and waterborne systems as well as for polyurethane-acrylate binders. It is highly suited for compressed air spraying and dip coating, flow coating, and curtain coating. It is also suitable for airless spraying, flooring, and brush.roller applications.
TEGO® Foamex 830
TEGO® Foamex 830 is a silicone-free defoamer concentrate, highly compatible, ideally suitable for the grinding stage and pigment concentrates. It is a slightly hazy liquid organic polymer which contains fumed silica. TEGO® Foamex 830 is suitable for compressed air spraying and dip coating, flow coating, and curtain coating. Addition of this product may be either in the grind or during the let-down procedure. The long-term effectiveness of the defoamer is dependent on the formulation and should be tested in the individual formulation.
TEGO® Foamex 832
TEGO® Foamex 832 it is silicone-free and mineral oil-free defoamer concentrate, effective and compatible, ideally suitable for the let-down stage. It is a hazy liquid formulation based on hydrophobic organic active matters and dispersed solid particles. TEGO® Foamex 832 is based on sustainable raw materials, for use in the millbase of pigmented printing inks, and is suitable for contact with foodstuffs. Addition of this product may be either in the grind or during the let-down procedure. The long-term effectiveness of the defoamer is dependent on the formulation and should be tested in the individual formulation.
TEGO® Foamex 835
TEGO® Foamex 835 is a defoamer emulsion with utmost effectiveness. It is a white, thixotropic liquid emulsion of a dimethyl polysiloxane which contains fumed silica. TEGO® Foamex 835 shows very strong defoaming, especially for pigmented high-viscosity formulations. It is suitable for brush/roller applications, flexo/gravure printing, and compressed air and airless spraying. It is also suitable for pigmented and waterborne systems.
TEGO® Foamex 840
TEGO® Foamex 840 is a highly effective defoamer concentrate with excellent long-term persistance. It is a silica-free, clear liquid polyether siloxane copolymer. TEGO® Foamex 840 has strong defoaming characteristics for use in millbase and at the let-down stage. It has good long-term effectiveness for flooring and brush/roller applications. It is also suitable for flexo/gravure printing and compressed air spraying applications.
TEGO® Foamex 842
TEGO® Foamex 842 is a highly effective defoamer solution with good long-term effectiveness and very strong defoaming for use in millbase. It is a silica-free clear liquid solution of a polyether siloxane copolymer. Addition of this product may be either in the grind or during the let-down procedure. The long-term effectiveness of the defoamer is dependent on the formulation and should be tested in the individual formulation. TEGO® Foamex 842 is highly suitable for flexo/gravure printing. It is also suitable for both airless and compressed air spraying.
TEGO® Foamex 843
TEGO® Foamex 843 is a defoamer compound with fast foam knock-down. It is a clear to slightly hazy liquid formulation of polyethersiloxanes and organic polymers which contains fumed silica. It has strong defoaming characteristics with good foam collapse in pigmented low-viscosity systems. It is also suitable for pigmented and waterborne systems. TEGO® Foamex 843 is highly suitable for flexo/gravure printing. It is also suitable for airless spraying and for dip, flow, and curtain coating.
TEGO® Foamex 844
TEGO® Foamex 844 is an effective defoamer concentrate based on polyether siloxane technology. Contains no fumed silica. Suitable for pigmented and clear formulations.
TEGO® Foamex 845
TEGO® Foamex 845 is a defoamer emulsion for utmost requirements with regards to foam prevention and destruction. It is a white, thixotropic liquid emulsion of an organo-modified polysiloxane which contains fumed silica. TEGO® Foamex 845 has very strong defoaming with fast foam knock down, especially for surfactant rich formulations. It is highly suitable for flexo/gravure printing. It is also suitable for flooring and brush/roller applications.
TEGO® Foamex 852
TEGO® Foamex 852 is an effective defoamer concentrate based on polyether siloxane technology. Suitable for pigmented and clear formulations.
TEGO® Foamex 8820
TEGO® Foamex 8820 is an effective bio-based defoamer concentrate based on organic polymer technology. It has broad food contact compliances with green and renewable contents. Free of silicone, solvent, and mineral oil.
TEGO® Foamex 883
TEGO® Foamex 883 is a highly effective deaerator concentrate based on polyether siloxane technology. Good long-term effectiveness against foam. It is suitable for medium- to high-PVC formulations and is recommended for addition to the grinding and let-down stage. This product also offers good long-term efficiency during low-temperature storage of the coating.
TEGO® Foamex 8850
TEGO® Foamex 8850 is a compatible bio-based defoamer concentrate based on organic polymer technology. It has broad food contact compliances with green and renewable contents. Suitable for grind, let-down, as well as post-addition.
TEGO® Foamex 8880
TEGO® Foamex 8880 is an effective defoamer emulsion based on hybrid technology with high biobased content. It can be easily incorporated, shows good defoaming, and has excellent foam knock down properties. Free of solvents and mineral oil.
TEGO® Foamex 9
TEGO® Foamex 9 is an effective defoamer concentrate based on mineral oil technology. Silicone-free. Contains fumed silica.
TEGO® Foamex N
TEGO® Foamex N is a defoamer concentrate. It is a hazy liquid dimethyl polysiloxane which contains fumed silica. It has very strong defoaming in solventborne, pigmented, and radiation-curing formulations. Addition of this product may be used at the grinding stage of the procedure. TEGO® Foamex N is suitable for use for flooring, flexo/gravure printing, and brush and roller applications. It has clear solubility in both white spirit and butyl acetate.
TEGO® Glide 100
TEGO® Glide 100 is highly compatible flow and glide additive with good recoatability. It is a clear liquid polyether siloxane copolymer. It is suitable for clear coats, radiation-curing, pigmented, solventborne systems. TEGO® Glide 100 is highly suitable for flow promotion and also has an snit-crater and slip effect. This product can be added to the coating as supplied or as a predilution. Predilution in a suitable solvent simplifies dosage and incorporation. In alkaline or acidic media the long-term effectiveness of the product should be checked.
TEGO® Glide 110
TEGO® Glide 110 is a highly effective slip additive with flow promotion. It is a polyether siloxane copolymer supplied as a clear liquid that becomes hazy and thickens at temperatures below 15°C. It returns to clear and pourable after warming. TEGO® Glide 110 is universally applicable with good anti-crater effect. It also has good slip effect and is suitable for flow promotion. This product can be added to the coating as supplied or as a predilution. Predilution in a suitable solvent simplifies dosage and incorporation.
TEGO® Glide 130
TEGO® Glide 130 is a highly compatible slip and flow additive. It is a clear liquid polyether siloxane copolymer. TEGO® Glide 130 is universally applicable with good compatibility. It has good flow promotion and anti-crater effect. this product may be added to the coating as supplied or as a predilution. Predilution in a suitable solvent simplifies dosage and incorporation of TEGO® Glide 130.
TEGO® Glide 410
TEGO® Glide 410 highly effective glide and anti-crater additive with outstanding scratch resistance. It is a clear liquid polyether siloxane copolymer. TEGO® Glide 410 has excellent slip and anti-crater effect. It is suitable for 2-pack 100%, clear coat, pigmented, and solventborne systems. TEGO® Glide 410 is used in the topcoat of lacquer coats. Addition of this product to the coating can be used as supplied or as a predilution. Predilution in a suitable solvent simplifies dosage and incorporation.
TEGO® Glide 432
TEGO® Glide 432 is a highly effective flow and glide additive with superior substrate wetting properties in UV systems. It is a polyether siloxane copolymer clear liquid which becomes hazy and thickens at temperatures below 15 °C, but returns to clear and pourable after warming. TEGO® Glide 432 is suitable for clear coat, pigmented, solventborne, and radiation-curing formulations. Addition of this product to the coating can be as supplied or as a predilution. Predilution in a suitable solvent simplifies dosage and incorporation.
TEGO® Glide 435
TEGO® Glide 435 is a highly effective wetting, flow and glide additive with very low foaming. It is a polyether siloxane copolymer, clear liquid which becomes hazy and thickens at temperatures below 15 °C, but returns to clear and pourable after warming. This does not affect the performance properties of the product. TEGO® Glide 435 has good slip effect and substrate wetting without stablilizing foam in clear coat, pigmented, or radiation-curing formulations.
TEGO® Glide 440
TEGO® Glide 440 is a highly effective glide and flow additive with excellent compatibility. It is a clear liquid polyether siloxane copolymer. TEGO® Glide 440 is universally applicable with good anti-crater and slip effect. It is suitable for clear coat, pigmented, and solventborne systems. It is clear soluble in ethanol, butyl acetate, and tripropylene glycol diacrylate (TPGDA). It is cloudy in water, but is still stable. This product's addition to the coating can b as supplied or as a predilution. Predilution in a suitable solvent simplifies dosage and incorporation.
TEGO® Glide 450
TEGO® Glide 450 is a highly effective glide and flow additive with excellent compatibility. It is a clear liquid polyether siloxane copolymer. It is suitable for clear coat, pigmented, and solventborne systems. TEGO® Glide 450 is recoatable and universally applicable with good anti-crater and slip effect. It also has good flow promotion and is soluble in ethanol, butyl acetate, and tripropylene glycol diacrylate (TPGDA). Addition of the product to the coating, can be as supplied or as a predilution. Predilution in a suitable solvent simplifies dosage and incorporation.
TEGO® Glide 466
TEGO® Glide 466 shows an excellent anti-crater effect on contaminated substrates. It is very effective and can be used in a broad range of different coatings
TEGO® Glide 490
TEGO® Glide 490 is a highly efficient emulsion providing slip and anti-blocking properties in aqueous formulations. It is free of aromatic solvents and tin.
TEGO® Glide 492
TEGO® Glide 492 is a highly efficient emulsion providing slip and anti-blocking properties in aqueous formulations. It is free of aromatic solvents and tin, and is suitable for Ecolabel compliant formulations.
TEGO® Glide 494
TEGO® Glide 494 is a highly efficient emulsion providing good abrasion resistance in aqueous formulations. It offers very good slip and anti-blocking properties as well as good rub resistance in waterborne formulations. This product creates a soft and slippery touch and is free of aromatic solvents and tin.
TEGO® Glide 496
TEGO® Glide 496 provides outstanding slip and touch properties without compromising recoatability and compatibility. It is highly effective and can be used in a broad range of different coating and ink systems.
TEGO® Glide A 116
TEGO® Glide A 116 is a highly effective glide additive with superior scratch resistance. It is a clear liquid organo-modified polysiloxane that is excellent in combination with waxes and/or matting agents. TEGO® Glide A 116 has excellent slip properties in pigmented, solventborne, and NC systems. It is used in the topcoat of lacquer coats. Addition of this product to the coating can be as supplied or as a predilution. Predilution in a suitable solvent simplifies dosage and incorporation.
TEGO® Glide B 1484
TEGO® Glide B 1484 is a glide and flow additive with deaeration properties. It is a clear liquid polyether siloxane copolymer that is both recoatable and thermostable. TEGO® Glide B 1484 has good flow promotion in solvent-free and solventborne systems with deaerating properties. It also has good orientation of matting agents. This product can be added to the coating as supplied or as a predilution. Predilution in a suitable solvent simplifies the dosage and incorporation of TEGO® Glide B 1484.
TEGO® Glide ZG 400
TEGO® Glide ZG 400 is a versatile glide and flow additive with broad compatibility. It is a clear to slightly hazy liquid polyether siloxane copolymer. TEGO® Glide ZG 400 is universally and highly compatible for clear coat, pigmented, and solventborne systems. It is suitable for the topcoat of lacquer coats. Addition to the coating can be as supplied or as a predilution. Predilution in a suitable solvent simplifies the dosage and incorporation of TEGO® Glide ZG 400.
TEGO® Guard 9000
TEGO® Guard 9000 is an organically modified branched polysiloxane emulsion providing excellent quick-set properties. It is suitable for various decorative exterior paints.
TEGO® Humectant 7000
TEGO® Humectant 7000 is a highly effective humectant for colorants with minimized influence on hydrophobicity of coatings properties. It is a clear to hazy liquid high molecular weight polymer. It is highly suitable for pigment concentrates where it prevents caking. TEGO® Humectant 7000 has good compatibility for architectural coatings, and it is universal for pigment concentrates. This product replaces a part of water in the colorant formulation and is recommended to be added as supplied at the grind stage.
TEGO® Humectant 7005
TEGO® Humectant 7005 is a humectant for resin-free pigment concentrates. It does not contribute to VOCs and its influence on coating properties is very low.
TEGO® Phobe 1401 N
TEGO® Phobe 1401 N is an emulsion of an amino-functional polysiloxane for the hydro-phobization of coating formulations. It reduces water uptake and generates a water-beading effect.
TEGO® Phobe 1409
TEGO® Phobe 1409 is a siloxane hydrophobing agent. It is suitable for ecolabel compliant formulations. This product offers excellent hydrophobing and beading effects, and is easy to incorporate into the formulation.
TEGO® Phobe 1500 N
TEGO® Phobe 1500 N is a siloxane hydrophobing agent for waterborne, pigmented, and solventborne formulations. It is a clear liquid solution of an amino functional polysiloxane. TEGO® Phobe 1500 N has a very pronounced beading effect as well as good hydrophobing and early water resistance. It is suitable for silicate paints and plasters, emulsion paints and plasters, and wood coating applications. It is recommended to add this product to the grind stage before the let-down stage.
TEGO® Phobe 1650
TEGO® Phobe 1650 is a silicone resin emulsion for the hydrophobation of facade coatings. It is a white liquid emulsion of a modified polysiloxane resin. It has excellent early water resistance, low dirt pick-up, and strong reduction of capillary water absorption using economical amounts. TEGO® Phobe 1650 is highly suitable for hydrophobing of pigmented and waterborne systems. Addition of the product is recommended at the grind stage before the let-down stage. It may be added as supplied or as a predilution.
TEGO® Phobe 1659
TEGO® Phobe 1659 is a silicone resin hydrophobing agent. It offers strong reduction of capillary water absorption using economical amounts. This product also imparts low dirt pick-up and good tinting performance.
TEGO® Phobe 6510
TEGO® Phobe 6510 is a formulation of a polysiloxane resin / silane-blend for waterborne impregnations and primers.
TEGO® Phobe 6600
TEGO® Phobe 6600 is a white liquid emulsion of a polysiloxane resin/silane-blend for waterborne impregnations and primers for neutral and slightly alkaline substrates. This product has an excellent hydrophobing effect. It also has a water beading effect, early water resistance, and a low tendency to pick up dirt.
TEGO® Powder Aid D01
TEGO® Powder Aid D01 is a solid multifunctional polymeric additive for powder coatings. It provides pigment wetting, reduced melt viscosity, improved gloss, and leveling.
TEGO® Protect 5000 N
TEGO® Protect 5000 N is a liquid, anti-graffiti additive with utmost effectiveness. It is a solvent-free, hydroxy-functional polydimethyl siloxane with good marker resistance and an anti-graffiti effect. TEGO® Protect 5000 N also has an outstanding hydro- and oleophobic properties for 2-pack coatings based on acrylic/isocyanate and polyester/isocyanate applications. TEGO® Protect 5000 N is dilutable by esters, ketones and glycol ethers and is recommended to be added at the grind stage in pigmented formulations.
TEGO® Protect 5001
TEGO® Protect 5001 is a hydroxy-functional silicone polyacrylate.
TEGO® Protect 5100 N
TEGO® Protect 5100 N is an emulsion of a hydroxyfunctional polydimethylsiloxane.
TEGO® Rad 2100
TEGO® Rad 2100 is a clear liquid silicone acrylate, radiation-curing substrate wetting and flow additive. It is a radically crosslinkable flow and wetting additive, highly compatible, recoatable and glueable. It is highly suitable for flow promotion and is overprintable. TEGO® Rad 2100 can be used in both the primer/basecoat and the topcoat for paints and lacquers. Addition of this product to the coating can be as supplied or as a predilution. Predilution in a suitable solvent simplifies dosage and incorporation of TEGO® Rad 2100.
TEGO® Rad 2200 N
TEGO® Rad 2200 N is a clear to slightly hazy liquid radiation-curing substrate wetting, flow, glide, and slip additive. It is a silicone polyether acrylate that is radically crosslinkable and highly compatible. It is ideal for radiation-curing, pigmented, and clear coat as well as aqueous UV systems. TEGO® Rad 2200 N can be used in the topcoat of lacquer coats. Addition of this product to the coating can be as supplied or as a predilution. Predilution in a suitable solvent simplifies dosage and incorporation of TEGO® Rad 2200 N.
TEGO® Rad 2250
TEGO® Rad 2250 is a radiation-curing substrate wetting, flow and slip additive. It is a clear liquid silicone polyether acrylate. TEGO® Rad 2250 is a universal product for improving the most important surface properties of radiation-curing coatings. It is radically crosslinkable and is suitable for flow promotion, slip effect, and substrate wetting. It is used in the topcoat of lacquer coats. Addition of this product to the coating can be as supplied or as a predilution. Predilution in a suitable solvent simplifies dosage and incorporation of TEGO® Rad 2250.
TEGO® Rad 2300
TEGO® Rad 2300 is a radiation-curing substrate wetting, flow, and slip additive. It is a silicone polyether acrylate clear liquid which becomes hazy and thickens at temperatures below 15°C, but returns to clear and pourable after warming. TEGO® Rad 2300 is low foaming, universal, and radically crosslinkable. It improves mechanical resistance and substrate wetting. It can be used in the topcoat of lacquer coats. Addition of this product to the coating can be as supplied or as a predilution. Predilution in a suitable solvent simplifies dosage and incorporation of TEGO® Rad 2300.
TEGO® Rad 2330
TEGO® Rad 2330 is an efficient low-foaming radically cross-linkable substrate wetting and slip additive, providing wetting and flow properties. Recommended for broad areas of application.
TEGO® Rad 2500
TEGO® Rad 2500 is a radically crosslinkable glide, slip, and anti-blocking additive with good deaerating effects. It is a clear liquid silicone acrylate, radiation-curing defoaming additive which improves mechanical resistance and reduces friction. It is especially suitable for pigmented formulations. TEGO® Rad 2500 can be added to the coating as supplied or as a predilution either in the grind stage or during the let-down stage. Predilution in a suitable solvent simplifies dosage and incorporation of this product.
TEGO® Rad 2550
TEGO® Rad 2550 is a highly efficient cross-linkable slip additive and defoamer for radiation-curing inks and matte varnishes. Creates very low COF and hydrophobic surfaces with release effect.
TEGO® Rad 2650
TEGO® Rad 2650 is a highly effective release additive for radiation-curing formulations. It is a radically cross-linkable, clear to slightly hazy liquid silicone acrylate. TEGO® Rad 2650 can be used for radiation-curing printing inks and overprint varnishes, silk screen inks, and (litho) offset printing inks. It improves scratch and marker resistance with additional slip and deaerating activity. Addition of this product to the coating can be as supplied or as a predilution. Predilution in a suitable solvent simplifies dosage and incorporation of TEGO® Rad 2650.
TEGO® Rad 2700
TEGO® Rad 2700 is a radically crosslinkable release and glide additive with utmost effectiveness. It is hazy liquid silicone acrylate with a very high slip and release effect. Phase separation may occur during storage of the product, but can be remixed by stirring. The application properties of the product are not affected by the seperation. Addition of the product to the coating can be as supplied or as a predilution. Predilution in a suitable solvent simplifies dosage and incorporation of TEGO® Rad 2700.
TEGO® Rad 2800
TEGO® Rad 2800 is a new release additive for printing inks and varnishes. It has the highest release effect in the Rad portfolio, and therefore takes a further step in completing the range of radiation-curing glide and release additives. This product has a pronounced silicone character, combining strong hydrophobing properties with optimum system compatibility.
TEGO® Therm HPG 4000
TEGO® Therm HPG 4000 is a purely mineral product based on silicone dioxide. TEGO® Therm HPG 4000 can be combined with other materials to produce thermal insulation coatings.
TEGO® Therm HPG 6806
TEGO® Therm HPG 6806 is a purely mineral product based on silicone dioxide. TEGO® Therm HPG 6806 can be combined with other materials to produce thermal insulation coatings.
TEGO® Therm L 300
TEGO® Therm L 300 is a hybrid polysiloxane dispersion.
TEGO® Twin 4000
TEGO® Twin 4000 is a clear to slightly hazy liquid siloxane-based gemini surfactant. This product's properties are not affected by its haziness. It combines substrate wetting with good defoaming. It has very effective low foam and substrate wetting effects. It also has an anti-crater and flow promotion effect.
TEGO® Twin 4100
TEGO® Twin 4100 is a highly effective siloxane-based gemini surfactant. It is a clear to hazy liquid. The haziness of the liquid has no affect on the product's properties. TEGO® Twin 4100 has excellent substrate wetting and anti-crater effects for wood and furniture coatings, industrial coatings, printing inks, overprint varnishes, and polymer emulsions. It has good long-term persistance and no foam stabilization.
TEGO® Twin 4200
TEGO® Twin 4200 is a universal substrate wetting additive for waterborne wood coatings, industrial coatings and printing inks, which can also be used in solventborne and UV coatings. It provides outstanding wetting and anti-cratering properties. This product also offers enhanced reduction of surface tension and high compatibility.
TEGO® VariPlus 1201 TF
TEGO® VariPlus 1201 TF is a solution of a polyurethane polyol resin for solventborne coatings and printing inks delivered in liquid form. Particularly for solventborne formulations, this product can be applied for flexo and gravure inks as well as wood and furniture coatings. TEGO® VariPlus 1201 TF improves hardness, gloss, and blocking resistance as well as the color strength of organic pigments and the adhesion on many plastics and aluminum.
TEGO® VariPlus AP
TEGO® VariPlus AP is a formaldehyde-free, solvent-free, ketone-aldehyde condensation resin delivered inthe form of pellets. This product improves gloss, hardness, and the adhesion on aluminum and steel. It also has great viscosity reduction and increase of solids content for industrial coatings, wood and furniture coatings, architectural coatings, and leather coatings. Delivered in the form of pellets, use of TEGO® VariPlus AP increases drying speed and builds resistance to mineral oil.
TEGO® VariPlus CA
TEGO® VariPlus CA is a hard, ketone-aldehyde condensation resin for solventborne coatings and printing inks that is delivered in the form of pellets. This product is used for flexo and gravure inks, ball-point pen inks, industrial coatings, and wood and furniture coatings. Particularly for solventborne formulations, TEGO® VariPlus CA improves hardness, gloss, and blocking resistance as well as improving the adhesion on aluminum, steel, and glass.
TEGO® VariPlus CA N
TEGO® VariPlus CA N shows excellent viscosity reduction and helps accelerate the drying speed. It provides very good adhesion on metal combined with high gloss and good weather resistance.
TEGO® VariPlus DS 50
TEGO® VariPlus DS 50 is a anionic dispersion of a polyurethane polyol resin for waterborne coatings and pigment concentrates delivered in liquid form. Particularly for waterborne formulations, this product can be applied for pigment concentrates, industrial coatings, wood and furniture coatings, architectural coatings, and leather coatings. TEGO® VariPlus DS 50 improves pigment wetting and stabilization as well as the hardness, gloss, and blocking resistance. It also improves the adhesion on many plastics such as PC, ABS, PS, PA, PMMA, PVC, Noryl.
TEGO® VariPlus SK
TEGO® VariPlus SK is a hard polyol resin for solventborne coatings and printing inks. Particularly for solventborne formulations, this product can be applied for flexo and gravure inks, ball-point pen inks, industrial coatings, and wood and furniture coatings. TEGO® VariPlus SK has high light and heat resistance and improves the hardness, gloss, and blocking resistance. It also improves the color strength of organic pigments and the adhesion on many plastics and metals. It increases drying speed and may increase the solids content.
TEGO® ViscoPlus 3000
TEGO® ViscoPlus 3000 is a clear to hazy liquid associative thickener. It creates a nearly newtonian flow behavior, which means a constant thickening over a broad shear range. This product is universally applicable in a huge variety of waterborne paints and coatings. It is solvent-, alkylphenolethoxylate- (APE), and tin- (Sn) free. It has an excellent drag resistance and spattering prevention effect.
TEGO® ViscoPlus 3010
TEGO® ViscoPlus 3010 is a clear to hazy liquid, non-ionic, polyurethane-based thickener. It creates a nearly newtonian flow behavior, which means a constant thickening over a broad shear range. This product has a very strong "high-shear" thickening effect, especially ICI-viscosity. It is universally applicable in a huge variety of waterborne paints and coatings. It is also solvent, alkylphenolethoxylate- (APE), and tin- (Sn) free.
TEGO® ViscoPlus 3030
TEGO® ViscoPlus 3030 is a clear to hazy liquid, non-ionic, polyurethane-based thickener. It creates a pseudoplastic (shear thinning) flow behavior, which means the viscosity decreases with increasing shear loading. This product is universally applicable in a huge variety of waterborne paints and coatings. It is also solvent-, alkylphenolethoxylate- (APE), and tin- (Sn) free.
TEGO® ViscoPlus 3060
TEGO® ViscoPlus 3060 is a clear to hazy liquid non-ionic, polyurethane-based thickener. It creates a strong pseudoplastic (shear thinning) behavior, which means the viscosity decreases with increasing shear loading. This product is universally applicable in a huge variety of waterborne paints and coatings. It is also solvent-, alkylphenolethoxylate- (APE), and tin- (Sn) free.
TEGO® Wet 236
TEGO® Wet 236 is a siloxane-based superwetter providing exceptional substrate wetting and good flow and leveling in waterborne coatings and inks.
TEGO® Wet 238
TEGO® Wet 238 is a siloxane-based superwetter providing exceptional substrate wetting and good flow and leveling in waterborne coatings and inks.
TEGO® Wet 240
TEGO® Wet 240 is a clear liquid polyether siloxane copolymer used as a substrate wetting and anti-crater additive. It is highly effective with the highest compatibility, especially for fine atomization in spray application. This product has excellent substrate wetting and an anti-crater effect. It is suitable for waterborne, clear coat, and pigmented formulations. It is completely soluble in water, ethanol, TPGDA, butyl acetate, and white spirit.
TEGO® Wet 250
TEGO® Wet 250 is a clear liquid polyether siloxane copolymer used as a substrate wetting and anti-crater additive. It is universally compatible and has good recoatability This product has excellent substrate wetting and an anti-crater effect. It is suitable for waterborne, clear coat, and pigmented formulations. It is completely soluble in water, ethanol, TPGDA, butyl acetate, and white spirit.
TEGO® Wet 251
TEGO® Wet 251 is a universal substrate wetting additive. It is a liquid polyether siloxane copolymer. This product is suitable for clear coat, pigmented, and waterborne systems. TEGO® Wet 251 can be used in the primer/basecoat and the topcoat for lacquer coats. Addition of this product to the coating can be as supplied or as a predilution.
TEGO® Wet 260
TEGO® Wet 260 is a clear liquid polyether siloxane copolymer used as a substrate wetting and anti-crater additive. It is very compatible and widely effective in different applications and on different substrates. This product has excellent substrate wetting and an anti-crater effect. It is suitable for waterborne, clear coat, and pigmented formulations. It is completely soluble in water, ethanol, TPGDA, butyl acetate, and white spirit.
TEGO® Wet 265
TEGO® Wet 265 is a siloxane-based substrate wetting additive. It shows good flow promotion with low foam tendency in waterborne coatings. It provides good pore wetting in wood coatings.
TEGO® Wet 270
TEGO® Wet 270 is a highly effective substrate wetting additive. It is a clear liquid polyether siloxane copolymer with excellent anti-crater effect with flow promotion in waterborne, solventborne, and radiation-curing formulations. TEGO® Wet 270 is suitable for clear coat, radiation-curing, pigmented, and waterborne systems. It can be used in both the primer/basecoat and the topcoat for lacquer coats. It is recommended that the addition of this product to the coating be at the let-down stage and as supplied.
TEGO® Wet 280
TEGO® Wet 280 is a highly effective substrate wetting additive with good flow promotion. It is a clear liquid polyether siloxane copolymer with good compatibility and good atomization with spray applications in co-solvent containing formulations. TEGO® Wet 280 is suitable for clear coat, pigmented, and waterborne systems and can be used in the primer/basecoat and the topcoat for lacquer coats. It is recommended that at the let-down stage, TEGO® Wet 280 be added to the coating as supplied.
TEGO® Wet 290
TEGO® Wet 290 shows excellent wetting and anti-crater properties with flow promotion in waterborne coatings.
TEGO® Wet 296
TEGO® Wet 296 shows excellent wetting and anti-crater properties with flow promotion in waterborne coatings.
TEGO® Wet 500
TEGO® Wet 500 is a highly effective substrate wetting additive with good flow promotion. It is a clear liquid non-ionic organic surfactant ideal for spray application. It is universally applicable, silicone-free, and has low foam. It is suitable for clear coat, pigmented, radiation-curing, and waterborne systems. TEGO® Wet 500's addition to the coating can be as supplied or as a predilution. It is suitable for for addition during the let-down stage, but is recommended during the grind stage for pigmented formulations.
TEGO® Wet 505
TEGO® Wet 505 is a substrate wetting additive with defoaming properties. It is a highly dynamic, silicone-free, non-ionic, clear liquid organic surfactant. It is universally applicable, has low foam, and has good reduction of dynamic surface tension. TEGO® Wet 505 is suitable for clear coat, pigmented, and waterborne systems. Addition of this product to the coating can be as supplied or as a predilution during the let-down stage. However, it is recommended the addition of TEGO® Wet 505 in pigmented formulations, be during the grind stage.
TEGO® Wet 510
TEGO® Wet 510 is a substrate wetting additive with excellent flow promotion. It is a highly dynamic, clear liquid non-ionic organic surfactant with low foam and and is silicone-free. TEGO® Wet 510 is universally applicable and has good reduction of dynamic surface tension. It is suitable for waterborne, clear coat, and pigmented systems. It is used in both the primer/basecoat and the topcoat of lacquer coats. Addition of this product is recommended as supplied and is suitable for addition during the let-down stage.
TEGO® Wet KL 245
TEGO® Wet KL 245 is a highly active siloxane-based substrate-wetting additive. It shows very good substrate-wetting properties on difficult substrates like wood and plastic. It is highly compatible and recommended for waterborne and solvent-borne coatings.
TEGOMER® D 3403
TEGOMER® D 3403 is a non-ionic, waxy, organic polymer. It is silicone- and solvent-free. It is also free of alkylphenolethoxylates (APEs) and free of aromatic components. This product is dilutable by esters, ketones and glycol ethers as well as dilutable with water and suitable solvents in nearly any ratio. It is used for co-binder applications.
TEGOMER® H-C 5002
TEGOMER® H-C 5002 is a low molecular hydroxy-functional polyacrylate.
