BT-IN603 DTSA

BT-IN603 DTSA is an off-white to light yellow powder that has a melting point of 280-290°C and a moisture content of =0.10%. This product is most commonly used as a chemical intermediate in dyes and biocides.

Melting point280-290°C and a moisture content of =0

Moisture=0

Supplier profile

Documents

No document is attached to this grade yet.

Where it is used

Availability

BioTio Group publishes documents in the marked regions.

Supplier details

BioTio Group lists this grade in the Chemicals DB directory.

More grades from BioTio Group

Also from BioTio Group

BT-B101 BRONOPOL

BT-B101 BRONOPOL is a white crystalline powder that has a melting point of 126-131°C and a pH value of 5.0-7.0. This product is most commonly used as a broad-spectrum antimicrobial agent in coatings, paints, inks, and adhesive applications.

BT-IN604 DCPI

BT-IN604 DCPI is a white crystalline powder that has a content/assay of =98% and other isocyanate content of =1.0%. This product is most commonly used as an intermediate for the production of dyes.

Leafing Aluminum Paste BT-AP400

Leafing Aluminum Paste BT-AP400 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of =65%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings.

Leafing Aluminum Paste BT-AP401

Leafing Aluminum Paste BT-AP401 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of =75%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings.