GENOCURE* LRT

GENOCURE* LRT is a liquid Type I photoinitiator blend. It is a photoinitiator for UV/LED-curable inks, coatings and adhesives. GENOCURE* LRT is liquid, easy mixable and can replace TPO. The product properties can be described as follows: liquid and easy to add, can replace TPO, low yellowing for clear and white pigmented systems, good surface and through cure, good for high film thickness, low odor. GENOCURE* LRT has good absorption between 350 and 400 nm. Therefore, it is highly efficient in e.g. highly pigmented white systems and for high film weights. It has application in printing inks and varnishes, overprint varnishes, 3D/AM formulations, and adhesives. Typically used in concentrations from 3% to 7.5% in coatings and inks and from 2% to 4% in 3D photoresins. GENOCURE* LRT can replace TPO. The appropriate ratio is determined by comparative tests.

Supplier profile

Documents

No document is attached to this grade yet.

Where it is used

Availability

Rahn AG publishes documents in the marked regions.

Supplier details

Rahn AG lists this grade in the Chemicals DB directory.

More grades from Rahn AG

Also from Rahn AG

Printed Electronics Product Flash

Printed electronics is the broad term for a relatively new technology that defines the printing of electronics on common substrates such as paper, plastic, and textile using standard printing processes. The technology is believed to be one of the fastest growing in the world with an estimated USD 300 billion dollar market potential. Common press equipment used in the graphics arts industry, such as screen printing, flexography, gravure, ink-jet and offset lithography are employed.

ACMO

ACMO is an acryloyl morpholine. It is a resin for radically curable inks, coatings and adhesives. The product can be described as having low odor, good abrasion and solvent resistance, water soluble and good adhesion properties. The product improves the adhesion onto various substrates such as PVC, polyolefines, polyester and polystyrene. ACMO can be applied to the following applications: screen inks and varnishes; plastic coatings; laminating adhesives; printed circuit boards; and industrial coatings.

GENOCURE* BAPO

GENOCURE* BAPO is typically used in concentrations from 0.1 to 1.5%. In white pigmented inks and coatings, it is often used in combination with GENOCURE CPK. This product is a phosphine oxide photoinitiator for UV-curable inks, coatings and adhesives. Due to the strong absorption at 370nm GENOCURE* BAPO shows excellent through cure in pigmented systems.

GENOCURE* BDK

GENOCURE* BDK is a benzildimethylketal. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). This product is typically used in offset inks and varnishes, printed circuit boards, glassfiber coating, wood and industrial coating and photo polymers and printing plates.