GENOMER* 5142

GENOMER* 5142 is an acrylated amine synergist for radically curable inks, coatings, and adhesives. When used in combination with Type II photoinitiators, increased cure speeds and improved surface can be realized. This product is recommended for use in the following applications: overprint varnishes, coatings for wood, paper and board; industrial coatings on metal and plastics; UV-adhesives; and screen and flexo inks.

Supplier profile

Documents

No document is attached to this grade yet.

Where it is used

Availability

Rahn AG publishes documents in the marked regions.

Supplier details

Rahn AG lists this grade in the Chemicals DB directory.

More grades from Rahn AG

Also from Rahn AG

Printed Electronics Product Flash

Printed electronics is the broad term for a relatively new technology that defines the printing of electronics on common substrates such as paper, plastic, and textile using standard printing processes. The technology is believed to be one of the fastest growing in the world with an estimated USD 300 billion dollar market potential. Common press equipment used in the graphics arts industry, such as screen printing, flexography, gravure, ink-jet and offset lithography are employed.

ACMO

ACMO is an acryloyl morpholine. It is a resin for radically curable inks, coatings and adhesives. The product can be described as having low odor, good abrasion and solvent resistance, water soluble and good adhesion properties. The product improves the adhesion onto various substrates such as PVC, polyolefines, polyester and polystyrene. ACMO can be applied to the following applications: screen inks and varnishes; plastic coatings; laminating adhesives; printed circuit boards; and industrial coatings.

GENOCURE* BAPO

GENOCURE* BAPO is typically used in concentrations from 0.1 to 1.5%. In white pigmented inks and coatings, it is often used in combination with GENOCURE CPK. This product is a phosphine oxide photoinitiator for UV-curable inks, coatings and adhesives. Due to the strong absorption at 370nm GENOCURE* BAPO shows excellent through cure in pigmented systems.

GENOCURE* BDK

GENOCURE* BDK is a benzildimethylketal. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). This product is typically used in offset inks and varnishes, printed circuit boards, glassfiber coating, wood and industrial coating and photo polymers and printing plates.