Where it is used
Home / Graphic Arts & Inks / ingredients
Graphic Arts & Inks
EBECRYL® 524
EBECRYL® 524 is an acid-modified polyester diluted 30% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDODA)(1). It is used as the primary or modifying oligomer in UV or EB curable formulations to increase adhesion to a variety of substrates including paper, plastics and metal. It is recommended for: laminating adhesives, particularly between paper/aluminum, paper/LDPE, paper/polypropylene and aluminum/LDPE, primer coatings on metal, metallization receptive coatings on plastics, and improving intercoat adhesion.
Documents
No document is attached to this grade yet.
Availability
Allnex publishes documents in the marked regions.
Also from Allnex
CRYLCOAT® 1501-6
CRYLCOAT® 1501-6 is a highly reactive carboxylated polyester resin for use in the production of 50/50 hybrid powder coatings. This resin is designed for use with low viscosity epoxy resins and is suitable for the production of coatings at cure temperatures as low as 130° C on MDF substrates. Coatings based on this product combine good flow with high gloss and chemical resistance.
CRYLCOAT® 1506-0
CRYLCOAT® 1506-0 is a highly reactive carboxylated polyester resin for use in the production of 50/50 hybrid powder coatings. Formulations based on CRYLCOAT® 1506-0 exhibit good overbake and solvent resistance, good mechanical properties and very good flow.
CRYLCOAT® 1506-6
CRYLCOAT® 1506-6 is an extreme reactive carboxylated polyester resin for use in the production of 50/50 hybrid powder coatings. The resin is to be used with a low viscosity epoxy resin and is particularly suitable for the production of textured coatings for cure at temperatures between 120° and 140°C on MDF substrates.
CRYLCOAT® 1510-0
CRYLCOAT® 1510-0 is a carboxylated polyester resin for use in the production of 50/50 hybrid powder coatings. Coatings based on CRYLCOAT® 1510-0 exhibit excellent flow, high gloss, and excellent wetting of fillers and pigments.
