ADDITOL® VXW 6211 XFOAM

ADDITOL® VXW 6211 XFOAM additive - anti foam/air release - is a defoamer for emulsion paints, especially for adhesives, which meets the requirements of the Federal Health Administration.

Supplier profile

Documents

No document is attached to this grade yet.

Where it is used

Availability

Allnex publishes documents in the marked regions.

Supplier details

Allnex lists this grade in the Chemicals DB directory.

More grades from Allnex

Also from Allnex

CRYLCOAT® 1501-6

CRYLCOAT® 1501-6 is a highly reactive carboxylated polyester resin for use in the production of 50/50 hybrid powder coatings. This resin is designed for use with low viscosity epoxy resins and is suitable for the production of coatings at cure temperatures as low as 130° C on MDF substrates. Coatings based on this product combine good flow with high gloss and chemical resistance.

CRYLCOAT® 1506-0

CRYLCOAT® 1506-0 is a highly reactive carboxylated polyester resin for use in the production of 50/50 hybrid powder coatings. Formulations based on CRYLCOAT® 1506-0 exhibit good overbake and solvent resistance, good mechanical properties and very good flow.

CRYLCOAT® 1506-6

CRYLCOAT® 1506-6 is an extreme reactive carboxylated polyester resin for use in the production of 50/50 hybrid powder coatings. The resin is to be used with a low viscosity epoxy resin and is particularly suitable for the production of textured coatings for cure at temperatures between 120° and 140°C on MDF substrates.

CRYLCOAT® 1510-0

CRYLCOAT® 1510-0 is a carboxylated polyester resin for use in the production of 50/50 hybrid powder coatings. Coatings based on CRYLCOAT® 1510-0 exhibit excellent flow, high gloss, and excellent wetting of fillers and pigments.