Where it is used
Home / Graphic Arts & Inks / ingredients
Graphic Arts & Inks
PC-3144® Defoamer
PC-3144® Defoamer is a 40 % solution of a modified acrylic polymer in a hydrocarbon solvent. It was developed to improve the defoamer stability performance for formulated synthetic and mineral based lubricants. It is especially recommended for PAO and PIB based synthetic lubricants, as well as the formulations containing these components, where conventional polyacrylate based defoamers do not work or do not work well.
Documents
No document is attached to this grade yet.
Availability
Allnex publishes documents in the marked regions.
Also from Allnex
CRYLCOAT® 1501-6
CRYLCOAT® 1501-6 is a highly reactive carboxylated polyester resin for use in the production of 50/50 hybrid powder coatings. This resin is designed for use with low viscosity epoxy resins and is suitable for the production of coatings at cure temperatures as low as 130° C on MDF substrates. Coatings based on this product combine good flow with high gloss and chemical resistance.
CRYLCOAT® 1506-0
CRYLCOAT® 1506-0 is a highly reactive carboxylated polyester resin for use in the production of 50/50 hybrid powder coatings. Formulations based on CRYLCOAT® 1506-0 exhibit good overbake and solvent resistance, good mechanical properties and very good flow.
CRYLCOAT® 1506-6
CRYLCOAT® 1506-6 is an extreme reactive carboxylated polyester resin for use in the production of 50/50 hybrid powder coatings. The resin is to be used with a low viscosity epoxy resin and is particularly suitable for the production of textured coatings for cure at temperatures between 120° and 140°C on MDF substrates.
CRYLCOAT® 1510-0
CRYLCOAT® 1510-0 is a carboxylated polyester resin for use in the production of 50/50 hybrid powder coatings. Coatings based on CRYLCOAT® 1510-0 exhibit excellent flow, high gloss, and excellent wetting of fillers and pigments.
