Where it is used
Home / Graphic Arts & Inks / ingredients
Graphic Arts & Inks
EBECRYL® LED 04
EBECRYL® LED 04 is an acrylated polyamine that can be added as a co-resin to UV curable formulations. EBECRYL® LED 04 – when combined with an appropriate photo initiator system – transforms formulations into UV LED, UVA, or low energy curable systems by providing improved surface cure. In addition, this effect is also seen in high energy cure formulations. The improved surface cure is obtained by mitigating oxygen inhibition of the free radical process and/or by being an amine synergist for Norrish type II photo initiators. Coating and inks based on EBECRYL® LED 04 exhibit a low odor after UV or EB curing. Due to its hydrophobic nature EBECRYL® LED 04 can also be used in offset inks applications as a replacement of aminobenzoate synergists.
Documents
No document is attached to this grade yet.
Availability
Allnex publishes documents in the marked regions.
Also from Allnex
CRYLCOAT® 1501-6
CRYLCOAT® 1501-6 is a highly reactive carboxylated polyester resin for use in the production of 50/50 hybrid powder coatings. This resin is designed for use with low viscosity epoxy resins and is suitable for the production of coatings at cure temperatures as low as 130° C on MDF substrates. Coatings based on this product combine good flow with high gloss and chemical resistance.
CRYLCOAT® 1506-0
CRYLCOAT® 1506-0 is a highly reactive carboxylated polyester resin for use in the production of 50/50 hybrid powder coatings. Formulations based on CRYLCOAT® 1506-0 exhibit good overbake and solvent resistance, good mechanical properties and very good flow.
CRYLCOAT® 1506-6
CRYLCOAT® 1506-6 is an extreme reactive carboxylated polyester resin for use in the production of 50/50 hybrid powder coatings. The resin is to be used with a low viscosity epoxy resin and is particularly suitable for the production of textured coatings for cure at temperatures between 120° and 140°C on MDF substrates.
CRYLCOAT® 1510-0
CRYLCOAT® 1510-0 is a carboxylated polyester resin for use in the production of 50/50 hybrid powder coatings. Coatings based on CRYLCOAT® 1510-0 exhibit excellent flow, high gloss, and excellent wetting of fillers and pigments.
