Where it is used
Home / Graphic Arts & Inks / ingredients
Graphic Arts & Inks
DUROXYN® SEF 968w
Duroxyn® SEF 968w is a non-drying epoxy-resin-ester. It is used as binder for glass fibre sizing. It is processed as approx. 33 % emulsion in water. For production of the emulsion Duroxyn SEF 968w is heated up at a temperature of approx. 50 °C.
Documents
No document is attached to this grade yet.
Availability
Allnex publishes documents in the marked regions.
Also from Allnex
CRYLCOAT® 1501-6
CRYLCOAT® 1501-6 is a highly reactive carboxylated polyester resin for use in the production of 50/50 hybrid powder coatings. This resin is designed for use with low viscosity epoxy resins and is suitable for the production of coatings at cure temperatures as low as 130° C on MDF substrates. Coatings based on this product combine good flow with high gloss and chemical resistance.
CRYLCOAT® 1506-0
CRYLCOAT® 1506-0 is a highly reactive carboxylated polyester resin for use in the production of 50/50 hybrid powder coatings. Formulations based on CRYLCOAT® 1506-0 exhibit good overbake and solvent resistance, good mechanical properties and very good flow.
CRYLCOAT® 1506-6
CRYLCOAT® 1506-6 is an extreme reactive carboxylated polyester resin for use in the production of 50/50 hybrid powder coatings. The resin is to be used with a low viscosity epoxy resin and is particularly suitable for the production of textured coatings for cure at temperatures between 120° and 140°C on MDF substrates.
CRYLCOAT® 1510-0
CRYLCOAT® 1510-0 is a carboxylated polyester resin for use in the production of 50/50 hybrid powder coatings. Coatings based on CRYLCOAT® 1510-0 exhibit excellent flow, high gloss, and excellent wetting of fillers and pigments.
