Where it is used
Home / Graphic Arts & Inks / ingredients
Graphic Arts & Inks
ADDITOL® XW 6600 XFOAM
ADDITOL® XW 6600 XFOAM additive reduces macro and micro foam in all high gloss clear and pigmented waterborne paint systems for architectural, industrial coatings as well as printing inks and over print varnishes. Styrene-acrylate dispersions PU dispersions Waterborne alkyds Waterborne hybrids Waterborne 2K PUR. The recommended dosage is generally 0.05 - 0.8% on formulation. To ensure good distribution, and to avoid surface defects in the paint system, its recommended to incorporate ADDITOL® XW 6600 XFOAM with high shear forces.
Documents
No document is attached to this grade yet.
Availability
Allnex publishes documents in the marked regions.
Also from Allnex
CRYLCOAT® 1501-6
CRYLCOAT® 1501-6 is a highly reactive carboxylated polyester resin for use in the production of 50/50 hybrid powder coatings. This resin is designed for use with low viscosity epoxy resins and is suitable for the production of coatings at cure temperatures as low as 130° C on MDF substrates. Coatings based on this product combine good flow with high gloss and chemical resistance.
CRYLCOAT® 1506-0
CRYLCOAT® 1506-0 is a highly reactive carboxylated polyester resin for use in the production of 50/50 hybrid powder coatings. Formulations based on CRYLCOAT® 1506-0 exhibit good overbake and solvent resistance, good mechanical properties and very good flow.
CRYLCOAT® 1506-6
CRYLCOAT® 1506-6 is an extreme reactive carboxylated polyester resin for use in the production of 50/50 hybrid powder coatings. The resin is to be used with a low viscosity epoxy resin and is particularly suitable for the production of textured coatings for cure at temperatures between 120° and 140°C on MDF substrates.
CRYLCOAT® 1510-0
CRYLCOAT® 1510-0 is a carboxylated polyester resin for use in the production of 50/50 hybrid powder coatings. Coatings based on CRYLCOAT® 1510-0 exhibit excellent flow, high gloss, and excellent wetting of fillers and pigments.
