Home / Paint & Coatings / Suppliers / The International Group, Inc. (IGI Wax)

Paint & Coatings

The International Group, Inc. (IGI Wax)

The International Group, Inc. (IGI Wax) lists 57 grades in Paint & Coatings. The sheets saved on this site are below.

Listed grades57
Sheets here21
Formulas here0
PAINT & COATINGS SUPPLIER The International Group, Inc. (IGI Wax)

Grades from The International Group, Inc. (IGI Wax)

Aquaban® 9001A

ingredients

Aquaban® 9001A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. This product should be diluted with water before use, depending upon protection required. Typical dilution is 1:1 with water.

Aquaban® 9009A

ingredients

Aquaban® 9009A is a water-based treatment for paper and corrugated board. It imparts a high level of water repellence.

Aquaban® 9010A

ingredients

Aquaban® 9010A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. For corrugated application, the product should be diluted with water before use, depending upon protection required. Typical dilution is 1:1 with water. For general purpose application other than corrugated, the product can be used without dilution.

ASTORLITE® J50 (4636A)

ingredients

ASTORLITE® J50 is a soft, white, opaque wax specially designed for jar / container candles. Its cohesive strength and low shrinkage allow it to adhere to the container. Jar / container candles can be made with a single filling with no top-off necessary.

Bake-Guard 9156A

ingredients

Bake-Guard 9156A is a high performance water-based coating for corrugated board and paper substrates where exceptional grease and water resistance are required. Other unique features of this product are its high angle of slide and ease of printability.

Barrier-Grip 9471A

ingredients

Barrier-Grip 9471A is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle.

Barrier-Grip 9471B

ingredients

Barrier-Grip 9471B is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle.

Barrier-Grip 9472B

ingredients

Barrier-Grip 9472B is a water-based coating designed as an economical pre-coat for application onto kraft liners or other paper substrates. It seals the substrate and provides a uniform surface onto which functional coatings may be applied, optimising the performance of the functional coatings.

Barrier-Grip R5701H

ingredients

Barrier-Grip R5701H is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle.

Barrier-Grip R6709A

ingredients

Barrier-Grip R6709A is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle.

Barrier-Seal R6728A

ingredients

Barrier-Seal R6728A is a water-based coating designed for SBS cup stock and other paper based substrates. It can be used for any packaging application that requires excellent water resistance, oil resistance and heat seal.

ACCULIN® 1000 (2071A)

ingredients

ACCULIN® 1000 is a hard, high melting point polyethylene.

ACCULIN® 1500 (2057A)

ingredients

ACCULIN® 1500 is an extremely pure, inert, narrow melt point product that exhibits very specific expansion behavior.

ACCULIN® 1500 (2073A)

ingredients

ACCULIN® 1500 is a hard, low melting point polyethylene.

ACCULIN® 2000 (2074A)

ingredients

ACCULIN® 2000 is a hard, high melting point polyethylene.

ACCULIN® 500 (2056A)

ingredients

ACCULIN® 500 is a hard, low melting point polyethylene.

ACCULIN® 600 (2059A)

ingredients

ACCULIN® 600 is a hard, low melting point polyethylene.

ACCULIN® 655 (2061A)

ingredients

ACCULIN® 655 is a hard, low melting point polyethylene.

ACCULIN® 725 (2063A)

ingredients

ACCULIN® 725 is a hard, low melting point polyethylene.

EVACOTE® 7089A

ingredients

EVACOTE® 7089A is a specialty formulation of petroleum waxes and polymers suitable in consistency to be utilized as a sealant and coating for fertilizer applications.

EVACOTE® 7292C

ingredients

EVACOTE® 7292C is a premium multi-component formulation having good barrier properties against both water and moisture vapor. Its low viscosity might assist in achieving better machinability for application.

FOR MATERIAL SUPPLIERS

Put your materials in front of formulators.

Give product developers the specs, certifications, and sample path they need to shortlist your grades.

Talk to our team
Formulation scientist ready to help suppliers reach product developers