Home / Paint & Coatings / Suppliers / Sino-American Pigment Systems, Inc.
Paint & Coatings
Sino-American Pigment Systems, Inc.
Sino-American Pigment Systems, Inc. lists 33 grades in Paint & Coatings. The sheets saved on this site are below.
Grades from Sino-American Pigment Systems, Inc.
Barium Metaborate
Barium Metaborate, in the form of a white crystalline powder, is a non-toxic anti-corrosive pigment. This product can be used in solvent-borne or water-based coatings. In addition, it is resistant to powdering, mildew, stain, and fire. This product contains at most 1% moisture.
Blanc Fixe, Ultra Fine Grade, 180-P, 0.4 µm
Blanc Fixe, Ultra Fine Grade, 180-P, 0.4 µm, in the form of a white powder, is a precipitated barium sulfate. This product can be used as an extender in coating applications where the primary requirements are fineness and a high filling capacity. It offers UV light resistance, acid resistance, and alkali resistance, with increased whiteness and a high degree of brightness.
Blanc Fixe, Ultra Fine Grade, 180-P, 0.7 µm
Blanc Fixe, Ultra Fine Grade, 180-P, 0.7 µm, in the form of a white powder, is a precipitated barium sulfate. This product can be used as an extender in coating applications where the primary requirements are fineness and a high filling capacity. It offers UV light resistance, acid resistance, and alkali resistance, with increased whiteness and a high degree of brightness.
Blanc Fixe, Ultra Fine Grade, 198-BT, 0.4 µm
Blanc Fixe, Ultra Fine Grade, 198-BT, 0.7 µm, in the form of a white powder, is a precipitated barium sulfate. This product can be used as an extender in coating applications where the primary requirements are fineness and a high filling capacity. It offers UV light resistance, acid resistance, and alkali resistance, with increased whiteness and a high degree of brightness.
BLANC FIXE, Ultra Fine Grade, 198-BT, 0.7 µm
BLANC FIXE, Ultra Fine Grade, 198-BT, 0.7 µm, in the form of a white powder, is a precipitated barium sulfate. This product can be used as an extender in coating applications where the primary requirements are fineness and a high filling capacity. It offers UV light resistance, acid resistance, and alkali resistance, with increased whiteness and a high degree of brightness.
A121
A121, in the form of a white powder, is an anatase titanium dioxide pigment. This product can be used in printing inks, interior paints, paper coatings, and ceramics. It offers whiteness, dispersibility, and good hiding power.
EME1900
EME1900, in the form of a clear liquid, is a monoglycidyl ether of C12-C14 aliphatic alcohol. This product can be used in adhesives, flooring, potting and encapsulation applications. It is commonly used as a reactive diluent for high-viscosity epoxy resins. This product has a very low viscosity and is compatible at all concentrations with epoxy resins. Resulting blends can be cured using any epoxy curing agents.
FR50
FR50, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 50 and 52 degrees Celsius.
FR52
FR52, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 52 and 54 degrees Celsius.
FR54
FR54, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 54 and 56 degrees Celsius.
FR56
FR56, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 56 and 58 degrees Celsius.
FR58
FR58, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 58 and 60 degrees Celsius.
FR60
FR60, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 60 and 62 degrees Celsius.
FR62
FR62, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 62 and 64 degrees Celsius.
FR64
FR64, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 64 and 66 degrees Celsius.