Home / Paint & Coatings / Suppliers / Shamrock Technologies, Inc. 三叶科技
Paint & Coatings
Shamrock Technologies, Inc. 三叶科技
Shamrock Technologies, Inc. 三叶科技 lists 96 grades in Paint & Coatings. The sheets saved on this site are below.
Grades from Shamrock Technologies, Inc. 三叶科技
AquaFLON® 178G (PTFE / Synthetic Wax Aqueous Dispersion)
AquaFLON® 178G is PTFE (polytetrafluoroethylene) and synthetic wax and in an aqueous dispersion. AquaFLON® 178G is recommended for water-based industrial coatings.
AquaFLON® 50 (PTFE Aqueous Dispersion)
AquaFLON® 50 is submicron PTFE in an aqueous dispersion. AquaFLON® 50 is recommended for a wide variety of specialty applications in coatings such as water based overprint varnishes for can coatings. Due to its extremely small particle size, AquaFLON® 50 is most suitable for thin film applications.
AquaFLON® 52 (PTFE Dispersion)
AquaFLON® 52 is PTFE (polytetrafluoroethylene) in a non-ionic aqueous dispersion. AquaFLON® 52 is recommended for water-based specialty coatings.
AquaFLON® 605 (PTFE / Synthetic Wax Aqueous Dispersion)
AquaFLON® 605 is PTFE (polytetrafluoroethylene) and spherical synthetic wax in an aqueous dispersion. AquaFLON® 605 is recommended for a wide variety of specality applications in coatings.
AquaFLON® 797 (PTFE and Synthetic Wax Aqueous Dispersion)
AquaFLON® 797 is PTFE (polytetrafluoroethylene) and synthetic wax in a non-ionic aqueous dispersion. AquaFLON® 797 is recommended for a wide variety of water based industrial coatings, wood finishes, and composite treatments.
AquaFLON® MG (PTFE / Carnauba Wax Aqueous Dispersion)
AquaFLON® MG is PTFE (polytetrafluoroethylene) and carnauba wax in an aqueous dispersion.
CeraSPERSE 171 (Wax Dispersion)
CeraSPERSE 171 is polyethylene wax compounded in refined linseed oil (VOC-free). CeraSPERSE 171 is recommended for use in UV topcoats.
CeraSPERSE 174 (Wax Dispersion)
CeraSPERSE 174 is PTFE (polytetrafluoroethylene) and polyethylene wax compounded in refined linseed oil. CeraSPERSE 171 is recommended for UV topcoats.
CeraSPERSE 31 (Carnauba Wax Compound)
CeraSPERSE 31 is a carnauba wax compounded in Butyl Carbitol™ (Diethylene glycol monobutyl ether). This slow-evaporating, hydrophilic glycol ether provides compatibility with both polar and non-polar systems. CeraSPERSE 31 is recommended for solvent-based and water-based coatings.
CeraSPERSE 321BG (PTFE / Wax Compound)
CeraSPERSE 321BG is a PTFE (polytetrafluoroethylene) and wax compound in Butyl CARBITOL™ (Diethylene glycol monobutyl ether). This slow-evaporating, hydrophilic glycol ether provides compatibility with both polar and non-polar systems.
CeraSPERSE UV 636 (Carnauba Wax in UV Monomer)
CeraSPERSE UV 636 is carnauba wax dispersed in the UV monomer TRPGDA.
CeraSPERSE UV 691 (Carnauba Wax in UV Monomer)
CeraSPERSE UV 691 is carnauba wax dispersed in the UV monomer TRPGDA.
Fluoro P-77 (FEP Powder)
Fluoro P-77 is a FEP powder used in applications where release properties are required. Fluoro P77 offers high gloss and smoothness when fused.
FluoroSLIP® 225 (PTFE / Synthetic Wax Blend)
FluoroSLIP® 225 is a PTFE and low molecular weight synthetic wax blend.
FluoroSLIP® 421 (PTFE / Synthetic Wax Blend)
FluoroSLIP® 421 is a PTFE (polytetrafluoroethylene) and synthetic wax blend.
FluoroSLIP® 511 (PTFE / Synthetic Wax Blend)
FluoroSLIP® 511 is a PTFE (polytetrafluoroethylene) and synthetic wax blend. FluoroSLIP® 511 is recommended for powder coatings in water-based, solvent-based and UV systems.
FluoroSLIP® 515 (PTFE / Synthetic Wax Blend)
FluoroSLIP® 515 is a PTFE (polytetrafluoroethylene) and synthetic wax blend.
FluoroSLIP® 533 (PTFE / Synthetic Wax Blend)
FluoroSLIP® 533 is a PTFE and hydrophilic synthetic wax blend where the synthetic wax shows a uniform melting range peaking at 97°C.
FluoroSLIP® 605 (PTFE / Synthetic Wax Blend)
FluoroSLIP® 605 is a spherical synthetic wax and PTFE blend.
FluoroSLIP® 731MG (PTFE / Synthetic Wax Blend)
FluoroSLIP® 731MG is a PTFE (polytetrafluoroethylene), high melting synthetic wax, and carnauba wax blend. This wax blend shows a melting peaks ranging from 84 – 110°C.
FluoroTEX 130 (PTFE Powder)
FluoroTEX 130 is an unirradiated polytetrafluoroethylene (PTFE) texturing agent with a mean particle size of 130 microns. The FluoroTEX Series are stable, compatible, and easily dispersed in all solvent, water-based radiation curable, powder, air dry, and high temperature baked coatings. This product is ideal for systems that need high heat resistance, like coil coatings.
FluoroTEX 50 (PTFE Powder)
FluoroTEX 50 is an unirradiated polytetrafluoroethylene (PTFE) texturing agent with a mean particle size of 50 microns. The FluoroTEX Series are stable, compatible, and easily dispersed in all solvent, water-based radiation curable, powder, air dry, and high temperature baked coatings. This product is ideal for systems that need high heat resistance, like coil coatings.
FluoroTEX 90 (PTFE Powder)
FluoroTEX 90 is an unirradiated polytetrafluoroethylene (PTFE) texturing agent with a mean particle size of 90 microns. The FluoroTEX Series are stable, compatible, and easily dispersed in all solvent, water-based radiation curable, powder, air dry, and high temperature baked coatings. This product is ideal for systems that need high heat resistance, like coil coatings.
