Home / Paint & Coatings / Suppliers / DKSH
Paint & Coatings
DKSH
DKSH lists 1,009 grades in Paint & Coatings. The sheets saved on this site are below.
Grades from DKSH
AEROSIL® 300
AEROSIL® 300 is hydrophilic fumed silica with a specific surface area of 300m2/g. It acts as rheology and thixotropy control of liquids, binders, polymers, etc. It has excellent tranparency in unsaturated polyester resin.
AEROSIL® 380
AEROSIL® 380 is a hydrophilic fumed silica, with a surface area of 380m2/g.
AEROSIL® E 9200
AEROSIL®E 9200 is a structure modified, hydrophobicfumed silica. It enables high loading levels at low viscosities. It improves scratch resistance, provides low viscosity at high loading levels with low rheological effect.
AEROSIL® R 202
AEROSIL® R 202 hydrophobic fumed silica surface-treated with polydimethylsiloxane.
AEROSIL® R 972
AEROSIL® R 972 is a hydrophobic fumed silica after being treated with DDS (dimethyldichlorosilane). It is easy to disperse and suitable for a broad range of applications.
AEROXIDE® ALU C
AEROXIDE® ALU C is a fine-particle fumed aluminum oxide with a high surface area in powder coating. It has a marked aggregate and agglomerate structure. The positive surface charge makes it ideal to control the electrostatic charge in Powder Coating.
AEROXIDE® ALU C 805
AEROXIDE® ALU C 805 is a highly dispersed hydrophobic fumed aluminum oxide. AEROXIDE® ALU C 805 is a fine-particle fumed aluminum oxide, highly hydrophobized with an organo-silane. In addition to its free-flow properties, it protects against moisture.
ALBESTER™ 6181
ALBESTER™ 6181 resin has been specifically designed to give a superior exterior durability in a 95:5 ratio with ß-HAA and improved mechanical properties compared to standard superdurable systems.
ALU D10011
ALU D10011 are non leafing aluminum pigment in paste. They have lenticular flakes of small particle size and sparkling effects.They have high metallic effect. Its solent are aliphatic and aromatic. ALU Line are aluminum pigments for outstanding finishes, create special metallic effects through a selection between different particle shapes. Its main application are non-leafing aluminium high end for solvent-borne.
ALU D10017
ALU D10017 is a non leafing aluminum pigment in paste. It has lenticular flakes of small particle size and sparkling effects. It has high metallic effect. The solvent are aliphatic and aromatic. ALU Line are aluminum pigments for outstanding finishes, create special metallic effects through a selection between different particle shapes. Its main application are non-leafing aluminium high end for solvent-borne.
ALU D10028
ALU D10028 are non leafing aluminum pigment in paste. They are lenticular flakes of medium particle size and sparkling effects. They have high metallic effect. The solvent are aliphatic and aromatic. ALU Line are aluminum pigments for outstanding finishes, create special metallic effects through a selection between different particle shapes. Its main application are non-leafing aluminium high end for solvent-borne.
ALU D2034
ALU D2034 is a non leafing aluminum pigment in paste. They are lenticular flakes of coarse particle size and sparkling effects. Its solvents are aliphatic and aromatic. ALU Line are aluminum pigments for outstanding finishes, create special metallic effects through a selection between different particle shapes. Its main application are non-leafing aluminium high end for solvent-borne.
ALU F4016
ALU F4016 is a non leafing aluminum pigment in paste. It has irregular flakes of medium particle size. Its solvent is a white spirit and aromatic. ALU Line are aluminum pigments for outstanding finishes, create special metallic effects through a selection between different particle shapes. Its main application are non-leafing aluminium high end for solvent-borne.
ALUMINIUM PASTE 020G
ALUMINIUM PASTE 020G is leafing grade, D50 value is 20 µm and solvent: Mineral spirit.
ALUMINIUM PASTE XY-3307
ALUMINIUM PASTE XY-3307 is non leafing silver dollar series. D50 value is 7µm and the solvent is mineral spirit.
ALUMINIUM PASTE XY-618
ALUMINIUM PASTE XY-618 is non leafing metallic sparkle grade, D50 value is 100 µm and solvent : Mineral spirit.
ALUMINIUM PASTE XY-701
ALUMINIUM PASTE XY-701 is water based aluminium paste, D50 value is 60 µm and solvent : Isopropyl alcohol.
AMPARMOR 1043
AMPARMOR 1043 is a uniquely engineered two-part system of microcapsules containing a patented blend of healing agent based on silicone-based resins, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating applications where coating self-healing is needed for extended coating durability. AMPARMOR 1043 is recommended for use in liquid solvent-based, and powder coatings, and is compatible with most coating resin types including epoxy, polyester, polyurethane and acrylic systems. This product is available in Europe, Asia Pacific and North America.
AMPARMOR 2000
The AMPARMOR 2000 series is a uniquely engineered microcapsule containing a patented blend of healing agent based on epoxy functionalized alkyd polymers, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating applications where coating self-healing is needed for extended coating durability. The AMPAMOR 2000 series is recommended for use in solvent-based, water-based and powder coatings, and is compatible with most coating resin types including epoxy, polyester, polyurethane and acrylic systems. This product is available in Europe, Asia Pacific and North America.
AMPARMOR 3000
The AMPARMOR 3000 series is a uniquely engineered microcapsule containing a patented healing agent blend based on epoxy functionalized alkyd polymers, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating applications where coating self-healing is needed for extended coating durability. The AMPAMOR 3000 series is recommended for use in solvent-based, water-based and powder coatings, and is compatible with most coating resin types including epoxy, polyester, alkyd, urethane and acrylic systems. This product is available in Europe, Asia Pacific and North America.
AMPARMOR 4010
The AMPARMOR 4010 series is a uniquely engineered microparticle containing a patented blend of corrosion inhibitors. These microparticles are designed to extend coating durability by releasing inhibitors in response to the onset of corrosion. The AMPARMOR 4010 series is recommended for use in solvent-based, water-based and powder coatings, and is compatible with most coating resin types including epoxy, polyester, polyurethane and acrylic systems. This product is available in Europe, Asia Pacific and North America.
ANTKOTE® 2025
ANTKOTE® 2025 is a hydroxyfunctional polyacrylic dispersion designed for anticorrosion coating. It can be used for tow-component coating with polyisocyanates or other crosslinkers. It also can be used for one-component baking coating with amino resins or blocked polyisocyanates. Approx. 43% in water/1-butoxy-2- propanol/Diethylene glycol monobutyl ether, approx. 48:3.5:3.5. Neutralizing agent, N,N-dimethyl ethanolamine(<2wt%), bound as a salt.
ANTKOTE® 2033
ANTKOTE® 2033 is a hydroxy-functional polyacrylic dispersion designed for machinery, vehicle, and anti-corrosion coating. In combination with polyisocyanates or other crosslinkers, it can be used for two-component coating. It also can be used for one-component baking coating with amino resins or blocked polyisocyanates. Approx. 46% in water/solvent naphtha 100/2-butoxy ethanol, approx. 44:4:4. Neutralizing agent, N,N-dimethyl ethanolamine(<2wt%), bound as a salt.
ANTKOTE® 2035
ANTKOTE® 2035 is a hydroxy-functional polyacrylic dispersion designed for vehicle, machinery and anti-corrosion coating. It can be used for tow-component coating in combination with polyisocyanates or other crosslinkers. It also can be used for one-component baking coating with amino resins or blocked polyisocyanates. Approx. 43% in water/1-butoxy-2-propanol, approx. 47.5:7.5. Neutralizing agent, N,N-dimethyl ethanolamine(<2wt%), bound as a salt.
ANTKOTE® 2042
ANTKOTE® 2042 is a hydroxy-functional polyacrylic dispersion designed for vehicles, machinery, and anti-corrosion coating. It can be used for tow-component coating in combination with polyisocyanates or other crosslinkers. It also can be used for one-component baking coating with amino resins or blocked polyisocyanates. Approx. 46% in water/solvent naphtha 100/1-butoxy-2-propanol, approx. 44:4:4. Neutralizing agent, N,N-dimethyl ethanolamine(<2wt%), bound as a salt.
ANTKOTE® 2365
ANTKOTE® 2365 is a water-soluble hydroxyl acrylic copolymer designed for glass baking coatings. Combined with amino resins, it can be used for high-performance applications, like wine bottles and other glass works. Approx. 50% in water/ alcohol/ diethylene glycol butyl ether, neutralized with 2-dimethylethanolamine, ratio approx. 19:13:13:5.
ANTKOTE® 2367
ANTKOTE® 2365 is a water-soluble hydroxyl acrylic copolymer designed for glass baking coatings. Combined with amino resins, it can be used for high-performance applications, like wine bottles and other glass works. Approx. 50% in water/ alcohol/ diethylene glycol butyl ether, neutralized with 2-dimethylethanolamine, ratio approx. 19:13:13:5.
AOX52
AOX52 is a highly concentrated, free flowing powder with strong antimicrobial activities and has proved antivirus activity against Covid19. It can be added to different kinds of paints and lacquers (water based, solvent based, solvent free) as well as to thermoplastic materials (PP, PE, TPU, PU, ABS, PA etc.). This product is available in China, Taiwan, Japan, South Korea, Australia, New Zealand, India, USA.
AQUOLIN® 163
AQUOLIN® 163 is a water-dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). In combination with waterborne polymer dispersions (such as polyurethane, polyacrylate, and polyvinyl acetate) and waterborne polyol, it can be used for water-borne coatings and adhesives.
AQUOLIN® 268
AQUOLIN® 268 is water dispersible HDI isocyanate, used as curing agents for areas such as textiles, adhesives and industrial coatings, and can also be used as additives to improve the performance of waterborne coatings.
AQUOLIN® 269
AQUOLIN® 269 is a water-dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). In combination with waterborne polyurethane, polyacrylate, etc., it can be used for water-borne coatings and adhesives. After the addition of AQUOLIN® 269, the ready-to-use mixture must be used within the pot life.
AQUOLIN® 270
AQUOLIN® 270 is a water-dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). In combination with waterborne polyurethane, polyacrylate, etc., it can be used for water-borne coatings and adhesives.
AQUOLIN® 278
AQUOLIN® 278 can be used in combination with various hydroxyl-functionalized dispersions to formulate aqueous 2k coatings as a crosslinker. It has excellent water dispersion and mat effect.
ARCHSOL® 8039
ARCHSOL® 8039 is an anionic styrene acrylic copolymer emulsion designed for interior and exterior flat paint. It offers excellent scrub resistance, water resistance, and alkali resistance. Neutralizer: ammonia water. ARCHSOL® 8039 also offers the following properties: 1. APEO-free, no formaldehyde added. 2. Excellent water resistance and alkali resistance. 3. Good thickening response. 4. Low coalescent demand.
ARCHSOL 8061
ARCHSOL 8061 is an anionic pure acrylic emulsion designed for exterior wall paint. It exhibits outstanding dirt pick-up resistance, excellent early water resistance, and good colorant compatibility. It has good gloss stability, excellent durability, a good early water resistance, and good adhesion after being immersed in water.
ARCHSOL® 8573
ARCHSOL® 8573 is a low odor hydroxylated acrylic copolymer emulsion. It exhibits excellent chemical resistance, wear resistance, and anti-graffiti property when used with water-dispersible polyisocyanate hardeners.
AXILAT™ DF 770 DD
AXILAT™ DF 770 DD is a powder defoamer. AXILAT™ DF 770 DD is a foam control agent based on a mixture of mineral oil and nonionic surfactants on an inert carrier. It is APEO-free.
AXILAT HP 8029
AXILAT HP 8029 is a highly versatile in water re-dispersible polymer powder, AXILAT HP 8029 is used for the modification of dry mortars to improve the adhesion to conventional substrates, including EPS.
AXILAT HP8530
AXILAT HP 8530 is a redispersible powder for dry mix applications. AXILAT HP 8530 is a hydrophobic vinyl acetate/vinyl versatate copolymer resin in redispersible powder form. It is a highly versatile resin with high redispersibility in water and is used in dry mortars.
AXILAT PSB 150
AXILAT PSB 150 is a re-dispersible powder for dry mix. AXILAT PSB 150 is a styrene-butadiene copolymer powder resin that is redispersible in water. AXILAT PSB 150 redisperses to a particle size that is one-tenth of conventional latex powders, resulting in a very high binder power and enhanced adhesion for end-use formulations. It is highly recommended for gypsum-based applications.
AXILAT™ RH 100 XP
AXILAT™ RH 100 XP is a thickener. AXILAT™ RH 100 XP is a rheological agent for cement and gypsum-based mortars (thixotropy and anti-Segregation).
AXILAT™ SA 502
AXILAT™ SA 502 is an anti shrinkage admixture. AXILAT™ SA 502 is a 100% amorphous "flash" alumina with a very high surface area. It is a set accelerator and can be used as an anti-shrinkage admixture for portland cement.
AXILAT UP600B
AXILAT UP 600 B is used to improve the workability of fresh mortar and its hydrophobic properties. AXILAT UP 600 B is a vinyl acetate, vinyl versatate, and maleic ester copolymer resin in redispersible powder form. It is redispersible in water and used in dry mortars to improve the workability of fresh mortar, hydrophobic properties, adhesion to conventional substrates, especially after severe ageing conditions, and mechanical properties (flexibility, abrasion resistance, and cohesive strength). It is a plasticiser-free powder, particularly suitable for ecologically demanding systems.
AXIMUL DSA17H
AXIMUL DSA17H is a 90% monoisopropylamine salt of linear alkylbenzene sulphonic acid.
AXIMUL DSA17PB
AXIMUL DSA17PB is a 90% monoisopropylamine salt of linear alkylbenzene sulphonic acid.
AXISOL A102
AXISOL A102 is a ready-to-use liquid additive to improve the handling and performance of mortars and concrete mixtures.
Benaqua 4000
Benaqua 4000 is a rheological additive designed for lower-gloss and matte latex paints, textured and high-build coatings, and water-borne adhesives. It is especially useful in systems that are diluted with water prior to use.
BENATHIX®
BENATHIX® is an organically modified smectite clay developed to impart thixotropy and drainage control to unsaturated polyester laminating resins and gel coats.
BENGEL® 434
BENGEL® 434 is a rheological additive designed for low to intermediate-polarity organic systems.
BENGEL® 818
BENGEL® 818 is an easily dispersible rheological additive for Non-Polar to Medium-Polarity aliphatic and other solvent systems.
BENGEL® 828
BENGEL® 828 is an easy to incorporate rheological additive based on organic derivative of a bentonite clay. It is designed for use in moderate to high polarity systems containing solvents such a ketones, esters, glycol ethers and alcohols, including polar systems with some aromatic solvents.
BENGEL® 908
BENGEL® 908 is a rheological additive designed for low to intermediate-polarity organic systems.
BENTONE® 1000
BENTONE® 1000 is an organic derivative of bentonite clay. This highly efficient and cost-effective rheological additive is designed for low- to intermediate polarity organic systems.
Bentone 27
Bentone 27 is a conventional hectorite-based organoclay for high polarity systems, polyol, epoxy, etc.
BENTONE® 27
BENTONE® 27 is a conventional hectorite-based organoclay for high polarity systems, polyol, epoxy, etc.
BENTONE® 34
BENTONE® 34 is a rheological additive is designed for low to intermediate polarity organic systems.
BENTONE® 38
BENTONE® 38 is a rheological additive designed for low to intermediate-polarity organic systems.
Bentone 54
Bentone 54 is a conventional organoclay for low to intermediate polarity organic systems.
BENTONE® 54
BENTONE® 54 is a conventional organoclay for low to intermediate-polarity organic systems.
BENTONE® 54K
BENTONE® 54K is a rheological Additive for Low to Intermediate Polarity Organic Systems.
BENTONE® DE
BENTONE® DE is a rheological Additive for Waterborne Systems.
BENTONE® DY CE
BENTONE® DY CE functions as a rheological additive and is made from organically modified powdered clay. BENTONE® DY CE displays the benefits of being easy to use, highly compatible for a wide range of applications, improved storage stability, excellent suspension, and efficient in low-shear thickener. BENTONE® DY CE is suitable for use in adhesive, cementitious systems, decorative emulsion paints, plaster-type compounds, silicate paints, and waterborne epoxy coatings. For more details, please find the Technical Data Sheet below for download and request a sample today for your new product development.
Bentone® EW
Bentone® EW is a rheological additive for water-borne systems. Bentone® EW additive is a highly beneficiated, easily dispersible powdered smectite clay. Its applications are adhesives, ceramic compounds, ceramic glazes, corrosion-inhibitive primers, cosmetics, crop protection agents, electrodeposition coatings, latex paints, foundry paints/foundry resins (washes), oil-in-water emulsions, other water-borne paint systems, paper coatings, polishes, and cleaners, Welding electrode.
BENTONE® EW NA
BENTONE® EW NA is a rheological additive for water-borne systems.
Bentone HC
Bentone HC is a refined hectorite suitable for the thickening and flow control of aqueous systems.
BENTONE® LT
BENTONE® LT additive is an organically modified powdered clay additive designed for water borne systems, primarily latex paints.
BENTONE SD®-1
BENTONE SD®-1 is a rheological Additive for Non-Polar to Medium-Polarity Aliphatic and other Solvent Systems -Very Easily Dispersible.
BENTONE SD®-2
BENTONE SD®-2 is an easy-to-incorporate rheological. additive based on an organic derivative of bentonite clay. It is designed for use in moderate to high polarity.
BENTONE® WBS
BENTONE® WBS rheological additive is a beneficiated, high purity smectite clay for waterborne coatings and related systems.
Benzyl Alcohol
Benzyl Alcohol is mainly used in the epoxy industry: epoxy coatings and paints, curing argent, and hardeners. organic solvents: cleaning agent, traffic paints (road marking ink).
BIOSUCCINIUM®
BIOSUCCINIUM® is high quality thermosetting resin, it can be used as an alternative to phthalic anhydride and in combination with other bio-based monomers, can enable 100% renewable resins.
BR 100000 H
BR 100 000 H is nonionic thickener. It is widely used in latex paints, building materials, oilfield chemicals, home care and personal care products and most of the water born systems.
BR 150 H
BR 150 H is nonionic thickener. It is widely used in latex paints, building materials, oilfield chemicals, home care and personal care products and most of the water born systems.
BR 15000 H
BR 15000 H is nonionic thickener. It is widely used in latex paints, building materials, oilfield chemicals, home care and personal care products and most of the water born systems.
BR 200000 H
BR 200000 H is newly-launched hydroxyethyl cellulose with high viscosity. This nonionic polymer has good bio-stability so it can keep relatively high viscosity in a long time.
BR 30000 H
BR 30000 H is nonionic thickener. It is widely used in latex paints, building materials, oilfield chemicals, home care and personal care products and most of the water born systems.
BR 30000 L
BR 30000 L is nonionic thickener. It is widely used in latex paints, building materials, oilfield chemicals, home care and personal care products and most of the water born systems.
BR 52 000 H
BR 52 000 H is nonionic thickener. It is widely us ed in latex paints, building materials, oilfield chemicals, home care and personal care products and most of the water born systems.
BR100000PC
BR100000PC is nonionic thickener. This white powder is made from ethylene oxide reacted with alkaline cellulose under certain conditions. The purity of purified HEC should be more than 96.0% (on dry basis) when the HEC is used for personal care and cosmetics.
BR300H
BR300H is nonionic thickener. It is widely used in latex paints, building materials, oilfield chemicals, home care and personal care products and most of the water born systems.
BR4400H
BR4400H is a nonionic water soluble thickener of hydroxyl ethyl cellulose (HEC). It is widely used in latex paints, building materials, oilfield chemicals, home care personal care products and most of the water born systems with.
A-C 316A
A-C 316A is a hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer, in finer powder form than A C 316, for use in waterborne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, this can help improve sewability and fabric cutting, helping to extend cutting machine lifetime. Its acid number of 16 allows it to be emulsified into water. Can also provide heat resistance to hot melt adhesives (HMAs). In addition, may be used as a metal release agent for PVC processing and is a fusion control for PVC formulations. It will not affect clarity in transparent PVC applications. Very effective for use in processing PVC regrind. This product is available in China, Philippines, Australia and New Zealand.
A-C 325
A-C 325 is a Hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, this can help improve sewability and fabric cutting, extending cutting machine lifetime. Its acid number of 25 allows it to be emulsified into water. Can also provide heat resistance to hot melt adhesives (HMAs). This product is available in China, Philippines, Australia and New Zealand.
A-C 330
A-C 330 is a hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. In textiles, it can help improve sewability and fabric cutting, extending cutting machine lifetime. Its acid number is 30, which allows it to be emulsified into water. It can also provide heat resistance to hot melt adhesives (HMAs).
A-C 400
A-C 400 is a Ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 13%, used extensively in hot melt adhesives (HMAs) to control rheology and boost adhesion. It can be added as a diluent but provides the dual function of reducing application viscosity at melt, while providing an adhesion boost versus homopolymer, non functional diluents (FT, byproduct, thermally degraded (TD) and PE homopolymer waxes). It is completely miscible in EVA adhesive resins, as would be expected by the similar chemistry. It is also used in candles to provide paraffin crystal nucleation, which increases thermal and breakage resistance, adhesion to glass, and fragrance retention. This product is available in China, Philippines, Australia and New Zealand.
A-C 400A
A-C 400A is a Ethylene vinyl acetate (EVA) copolymer in powder form, with a VA content of 13%, used extensively in hot melt adhesives (HMAs) to control rheology and boost adhesion. It can be added as a diluent but provides the dual function of reducing application viscosity at melt, while providing an adhesion boost versus homopolymer, non functional diluents (FT, byproduct, thermally degraded (TD) and PE homopolymer waxes). It is completely miscible in EVA adhesive resins, as would be expected by the similar chemistry. It is also used in candles to provide paraffin crystal nucleation, which raises thermal and breakage resistance, adhesion to glass, and fragrance retention. Is also a dispersing agent for color masterbatch in stryenic resins. Excellent dispersing agent and process aid for EVA-based wire and cable compounds. This product is available in China, Philippines, Australia and New Zealand.
A-C 405M
A-C 405M is an ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 8%, for use in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. This product is available in China, Philippines, Australia and New Zealand.
A-C 405T
A-C 405T is an ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 6%, for use in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. This product is available in China, Philippines, Australia and New Zealand.
A-C 540
A-C 540 is an ethylene acrylic acid (EAA) copolymer in a prill form, with an acrylic acid (AA) content of 5%, for use in adhesives to promote adhesion to various substrates. It is also used in aqueous floor polishes to provide drag (raising the coefficient of friction) thereby controlling the final coefficient of friction. Its acid number of 40 aids emulsification. Also used in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. This product is available in China, Philippines, Australia and New Zealand.
A-C 540A
A-C 540A is a Ethylene acrylic acid (EAA) copolymer in a powdered form, with an acrylic acid (AA) content of 5%, for use in adhesives to promote adhesion to various substrates. It is also used in aqueous floor polishes to provide drag (raising the coefficient of friction) thereby controlling the final coefficient of friction. Its acid number of 40 aids emulsification. Also used in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. Is a dispersing agent for color masterbatch in engineering resins. Excellent external lubricant for polyamide compounds.This product is available in China, Philippines, Australia and New Zealand.
A-C 6
A-C 6 is a low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Used in cable flooding compounds, along with polybutene. This product is available in China, Philippines, Australia and New Zealand.
A-C 617
A-C 617 is a Low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Is used as a dispersing agent in color masterbatch applications. In PVC applications it finds use as an external lubricant. This product is available in China, Philippines, Australia and New Zealand.
A-C 617A
A-C 617A is a low density polyethylene (LDPE) homopolymer in a powdered form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. In PVC applications it finds use as an external lubricant. This product is available in China, Philippines, Australia and New Zealand.
A-C 629
A-C 629 is a low density Oxidized Polyethylene (LDOxPE) homopolymer in prill form for use in solvent borne coatings as a rheological aid. It also finds use as a metal release agent in PVC. It can also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar & abrasion resistance and increased slip. This product is available in China, Philippines, Australia and New Zealand.
A-C 629A
A-C 629A is a low density Oxidized Polyethylene (LDOxPE) homopolymer in prill form for use in solvent borne coatings as a rheological aid. It also finds use as a metal release agent in PVC. It is a pigment dispersing agent for color masterbatch. It can also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar & abrasion resistance and increased slip. This product is available in China, Philippines, Australia and New Zealand.
A-C 680
A-C 680 is Low Density Oxidized Polyethylene (LDOxPE) homopolymer in prill form for use in solvent borne coatings as a rheological aid. It can also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar & abrasion resistance and increased slip. It can also be used as an anti transpirant coating to delay fruit spoilage allowing longer storage and transport times. It also finds use as a metal release agent in PVC.
A-C 6A
A-C 6A is a homopolymer in a powdered form; for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. A-C 6A can be also partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Used in cable flooding compounds, along with polybutene. Is used as a dispersing agent in color masterbatch applications.
A-C X 1946
A-C X 1946 is an ethene, homopolymer, used in painting and powder painting. It has good transparancy and works as a flatting agent with good abrasion performance and hand feeling to improve demolding.
AAEM
AAEM is a methacrylic monomer used to formulate highsolids solution acrylic resins and acrylic emulsions for lower VOC emission industrial and architectural coatings. The ability of AAEM to react with amines and hydrazides makes it an ideal monomer for self-crosslinkable, room temperature cure acrylic emulsions. It also finds use in acetoacetylated polymers crosslinked through chelation with metal ions and for acetoacetylated polymers for producing colorfast fibers (azo-dye). AAEM readily polymerizes with other acrylic and methacrylic monomers. Chemical name: Acetoacetoxyethyl Methacrylate. This product is available in Europe, Asia and North America.
CARBOWET GA-100
CARBOWET GA-100 is a nonionic wetting agent and grind aid, improved milling efficiency. CARBOWET GA-100 is a non-ionic grind aid for waterborne formulations. Focus on pigment wetting. Additionally helps deaeration of the millbase.
CARBOWET GA-211
CARBOWET GA-211 is a nonionic Wetting Agent and Grind Aid, high deaeration activity CARBOWET GA-211 is a non-ionic grind aid for waterborne formulations. Focus on pigment wetting. Additionally helps deaeration of the millbase.
CD 1525 WH-4
CD 1525 WH-4 is an aluminum pigment in paste water-based. It is an aluminum flakes medium particle size. The product is stabilized with additives, water miscible solvents and emulsifier. It is used preferably for neutral or slightly basic system. CD Line is composed of aluminum pigments in paste, specially treated to protect the pigment in the aqueous systems.Its main applications are leafing for coatings and inks water-borne.
CD 3008 WH-4
CD 3008 WH-4 is an aluminum pigment in paste water-based. It has aluminum flakes small particle size. The product stabilized with additives, water miscible solvents and emulsifier.
CERIDUST 2020 TP
CERIDUST 2020 TP enhances rub and scratch resistance, improves slip properties, and reduces gloss for all kinds of printing inks and coatings. It is also a processing agent for powder coatings to increase the output and flowability of powder and matting agents.
CERIDUST 2740 TP
CERIDUST 2740 TP is a micronized modified amide wax. Used in solvent or water-based liquid coatings, e.g. in wood coatings, it shows good matting, clarity, scratch resistance, and slip properties. CERIDUST 2740 TP is an effective degassing agent and can also increase the output during the extrusion process and improve flow ability in powder coating applications. It also provides improved slip properties and enhances the scratch resistance of the cured powder coating.
CERIDUST 3610
CERIDUST 3610 is a micronized high-density polyethylene wax.
CERIDUST 3620
CERIDUST 3620 is a micronized polyethylene wax.
CERIDUST 3715
CERIDUST 3715 is a micronized, polar-modified polyethylene wax recommended for solvent and water-based coatings and inks.
CERIDUST 3910
CERIDUST 3910 is a micronized amide wax.
CERIDUST 3920 F
CERIDUST 3920 F is a micronized, polytetrafluoroethylene modified polyethylene wax. CERIDUST 3920 F is a PTFE modified polyethylene wax and improve scratch resistance and slip in coatings like can and coil coatings Powder Coating and solvent containing coatings.
CERIDUST 9615A
CERIDUST 9615A is a slip and rub resistance additive in all kind of printing ink and coating systems. It is a micronized blend of polyethylene and amide wax.
ACEMATT® 3600
ACEMATT® 3600 is a fine particle sized specially after-treated precipitated silica, ideal for UV-coatings. It is particularly suitable for matting very thin or very thick UV-coating films.
ACEMATT® 790
ACEMATT® 790 is an untreated, medium particle-sized precipitated silica. It is especially recommended for coil coatings, as well as general industrial coatings.
ACEMATT® HK 400
ACEMATT® HK 400 is an untreated fine-grained precipitated silica. ACEMATT® HK 400 is an untreated, medium particle-sized precipitated silica. It is especially recommended for pigmented systems.
ACEMATT® OK 412
ACEMATT® OK 412 is a fine-grained wax after-treated precipitated silica, suitable for pigmentation. ACEMATT® OK 412 is a wax-treated, medium particle-sized precipitated silica. It can be used in a large variety of coatings by offering very high compatibility.
ACEMATT® OK 500
ACEMATT® OK 500 is a fine-grained wax after-treated precipitated silica, suitable for pigmented and non-pigmented. ACEMATT® OK 500 is a wax-treated, medium particle-sized precipitated silica. It can be used in a large variety of coatings by offering very high compatibility. It has been optimized to have a minimal impact on drying times.
ACEMATT® OK 520
ACEMATT® OK 520 is a fine-grained wax after-treated precipitated silica. ACEMATT® OK 520 is a wax-treated, medium particle-sized precipitated silica. Providing very high compatibility it can be used in a large variety of coatings.
ACEMATT® OK 607
ACEMATT® OK 607 is a fine particle-sized wax-treated precipitated silica. It is suitable for pigmented and non-pigmented systems.
ACEMATT® OK 900
ACEMATT® OK 900 is a medium particle size, wax-treated precipitated silica. ACEMATT® OK 900 is a highly efficient, medium particle-sized, wax treated precipitated silica. It is especially recommended for coil coatings as well as general industrial coatings.
ACEMATT® TS 100
ACEMATT® TS 100 is an untreated thermal silica. ACEMATT® TS 100 is an untreated thermal silica with outstanding properties. It provides very high efficiency and transparency. It can be used in a large variety of coatings.
CO2PURE AIR PURIFIER
CO2PURE AIR PURIFIER is an organic Painting with Single environmental technology, cleanses and purifies air, works day and night against environmental pollution by reducing gases CO2, NOx and VOC's, its lack of smell makes it particularly suitable for painting walls, ceilings indoors and outdoors, public places, schools, hospitals etc. This product is available in Asia.
CR 40000 N
CR 40000 N is a non-ionic high-molecular polymer. The white or off-white powder is freely soluble in cool water but not soluble in hot water. Its outstanding properties like water retention, thickening, rheological and adhesion make it the first choice to enhance quality of construction materials and decorative materials. This product is applicable to mortars that use cement, gypsum and lime and so on as gelling agent.
CR 8020 AM
CR 8020 AM is a non-ionic and water-soluble cellulose ether which is white or off-white powder and in nature a modified methyl hydroxyethyl cellulose (MHEC) with high viscosity. Its outstanding properties like water retention, constructability, thickening and adhesion make it the first choice for construction materials production such as mortars, putty and ceramic tile adhesive.
CR40000NGL
CR40000NGL is a non-ionic high-molecular polymer. The white or off-white powder is freely soluble in cool water but not soluble in hot water. Its outstanding properties like water retention, thickening, rheological and adhesion make it the first choice to enhance quality of construction materials and decorative materials. This product is applicable to mortars that use cement, gypsum and lime and so on as gelling agent.
CRYSOL® 6512
CRYSOL® 6512 is an aliphatic, hydroxy-functional polyurethane dispersion that is used as a binder for the formulation of soft-feel coatings, especially suitable for the plastic shell of mobile phones, laptops, mice, or other electronic products.
CURING AGENT HC68
CURING AGENT HC68 is a composed salt of cyclic-amidine and multi-acid. It utilizes the two different reaction rates of the group in molecular structure, and during the curing process, it generates nonuniform shrinkage and then forms a matte surface. It has both gloss-decreasing and curing functions.
DAPRO® ACP-16W
DAPRO® ACP-16W is a waterborne adhesion promoter, that is designed for improving the adhesion of waterborne coatings and inks on polypropylene (PP) substrates.
DAPRO® AP 7010
DAPRO® AP 7010 is a liquid defoamer, economical in use for universal waterborne applications. The product shows very good long-term efficiency.
DAPRO® AP 7015
DAPRO® AP 7015 is a defoamer for waterborne systems with very good emulsifying properties. It has excellent anti-foaming and de-foaming effects.
DAPRO AP 7015S
DAPRO® AP 7015S is a defoamer for waterborne systems with very good emulsifying properties.
Dapro® BIO 400
Dapro® BIO 400 is a bio-based solvent, a highly efficient replacement for glycol coalescence solvents, appears in a clear liquid form, and provides superior performance and low odor. Dapro® BIO 400 offers an effective reduction of MFFT and a 100% biobased carbon content Dapro® BIO 400 is recommended to use in water-based emulsion coatings for both interior and exterior applications, sustainable coatings, low VOC coatings, cleaners, paint strippers, adhesives and sealants applications.
DAPRO DF 696
DAPRO®DF 696 function as a highly efficient grind defoamer, that appears in an off-white liquid form. DAPRO® DF 696 offers an effective and easy to incorporate and disperes well into a wide range of formulations with excellent performance. DAPRO® DF 696 is well suitable to use in water based inks, water based industrial coatings and wood coatings and water-based alkyd, epoxy, polyurethane and styrene acrylate dispersions applications.
DAPRO® FK 321
DAPRO® FK 321 is an effective auxiliary for reducing the resistance of paints that are sprayed electrostatically.
DAPRO® FX 514
DAPRO® FX 514 is an advanced plasticizer made from renewable resources, offering a VOC-free and low-odor solution for aqueous adhesive systems. This cutting-edge plasticizer is designed to optimize film formation, plasticization, and long-term flexibility in low or zero-VOC water-based adhesives. With enhanced tackiness, superior flexibility, and outstanding plasticizing properties, DAPRO® FX 514 provides exceptional performance and reliability in various applications, including flexible and wood floorings, all while being environmentally friendly and odorless. Upgrade your adhesive formulations with DAPRO® FX 514 to experience improved performance and sustainability.
DCC YELLOW 3753
DCC YELLOW 3753 is greenish-yellow pigment used in a variety of high-performance coatings applications where excellent fastness properties are required.
DCC YELLOW 7351
DCC YELLOW 7351 is a high-performance green shade yellow pigment for use in high-end coatings applications where excellent gloss retention is required.
DEGACRYL® HS 4174 E
DEGACRYL® HS 4174E a binder for heat seal lacquers with direct adhesion for sealing alumunium or PET foil vs polypropylene, polystyrene, PET or vinyl.
DEGACRYL® HS 4322 E
DEGACRYL® HS 4322 E is a binder for heat seal lacquers with low haze and direct adhesion for sealing untreated PET film or aluminum foil versus polystyrene, PET, PLA, or vinyl.
DEGACRYL® RG S HV
DEGACRYL® RG S HV (high viscosity - 7.700 - 11.000 mPas) with alkalis, alkaline earths, ammonia, and amines in the form of their aqueous solutions are suitable for many technical and cosmetic purposes. They can be used as thickeners, dispersing agents, emulsifiers, and stabilizers for aqueous systems.
DEGACRYL® RG S MV
DEGACRYL® RG S MV (medium viscosity - 3.800 - 5.500 mPas) with alkalis, alkaline earth, ammonia, and amines in the form of their aqueous solutions are suitable for many technical and cosmetic purposes. They can be used as thickeners, dispersing agents, emulsifiers, and stabilizers for aqueous systems.
DEGALAN® 64/12 N
DEGALAN® 64/12 N is a binder for concrete coatings and metal coatings.
DEGALAN® LP 50/02
DEGALAN® LP 50/02 is a binder for the manufacture of PVC finishing, plastic coatings, printing inks, and hot stamping foils. DEGALAN® LP 50/02 is compatible with most PVC copolymers, NC, chlorinated rubber, and plasticizers; incompatible with cellulose acetobutyrate/acetopropionate, alkyd and epoxy ester resins, and silicone resins.
DEGALAN® P 24
DEGALAN® P 24 by Roehm is a methacrylic resin designed for UV printing inks. It exhibits medium hardness, elasticity, light-fastness, and excellent chemical resistance. It provides compatibility with PVC co-polymers, PS, PC, PMMA, ABS, pigments, printing ink raw materials, and ester-soluble nitrocellulose. DEGALAN® P 24 possesses good adhesion to various substrates such as plastics, paper, textiles, and metal. It shows solubility in esters and is blendable with alcohols.
DEGALAN® P 28 N
DEGALAN® P 28 N by Roehm is a methacrylic resin used in UV printing inks. It exhibits compatibility with polyolefin substrates including PP and PE. It provides sufficient adhesion to the substrates by applying primer and corona pre-treatment. It possesses universal solubility, excellent chemical resistance, and light-fastness. DEGALAN® P 28 N shows good compatibility with other printing ink raw materials and pigments.
DEGALAN P 675
DEGALAN P 675 is a binder for masonry paints.
DEGALAN® P 675
DEGALAN® P 675 is a binder for masonry paints.
DEGALAN® PM 381 N
DEGALAN® PM 381 N is a binder for concrete coatings, printing inks, and plastic coatings.
DEGALAN® PM 602
DEGALAN® PM 602 is a binder for concrete coatings and metal coatings. DEGALAN® PM 602 is a versatile binder. It is useable for the manufacture of glossy weather-resistant, light-fast, and chemical-resistant concrete coatings, exterior house paints, metal coatings, marine and container coatings, aerosol paints, and road marking paints.
DEGALAN® VP PM 612
DEGALAN® VP PM 612 is useable for the manufacture of glossy and concrete coatings, metal coatings, marine and container coatings, aerosol paints and road marking paints. DEGALAN® PM 612 is soluble in esters, ketones, glycol ethers, glycol esters and aromatics; solutions are blendable with alcohols.
DEURHEO 201P
DEURHEO 201P is a polyethylene wax dispersion anti settling agent which can be handled easily and dispersed rapidly.
DEURHEO 2810
DeuRheo 2810 is a liquid rheology modifier for solvent based coatings. It does not require specific activation temperature while incorporated.
DEURHEO WT-105A
DEURHEO WT-105A is an waterborne associative thickener based on polyurethane. Provide thickening and flowing.
DEURHEO WT-108F
DEURHEO WT-108F is a nonionic synthetic associative thickener (NiSAT) for aqueous applications to increase medium shear viscosity and provide good flowing. It is designed to be free of Tin, APEO and organic solvents.
ACQUAMINE PD 1419_7
ACQUAMINE PD 1419_7 is a waterborne cycloaliphatic amine adduct epoxy curing agent designed to cure both epoxy resin emulsions and standard epoxy resins.
ACQUAMINE PD 2157_2
ACQUAMINE PD 2157_2 is a waterborne aliphatic amine adduct epoxy curing agent designed to cure both epoxy resin emulsions and standard epoxy resins. ACQUAMINE PD 2157_2 has the following features: Fast dry time AND Long pot life.
Acrylic Resin GA-003
Acrylic Resin GA-003 is a solid acrylic resin containing epoxy functionality (GMA acrylic). It is used in thermosetting powder coatings to provide excellent outdoor durability. Typical applications include automotive trim and wheel clear coat. GA-003 can be used with curative like 1, 12-dodecanedioic acid (DDDA) to produce clear coating of high gloss, smoothness and clarity. Other polyacrylic acids and polyanhydrides can also be used as curatives for specific coating properties. This product is available in Europe, Asia and North America.
ACUMIST® A-12
ACUMIST® A-12 is a micronized oxidized polyethylene homopolymer for use in water based coatings, flexographic and gravure inks and overprint varnishes. It also can be used as a processing aid, matting and antissetling agent in paints.
ACUMIST® C-5
ACUMIST® C-5 is medium particle size micronized Polyethylene Homopolymer for use in solvent borne coatings and solvent based flexographic inks. As with all ACUMIST® products, it is insoluble in solvents and UV based monomers and oligomers at room temperature. best suited goroffset inks, can coatings, and all thin film solvent based coatings.
ACUMIST® D-6
ACUMIST® D-6 is micronized polyethylene homopolymer for use and general purpose solvent borne coatings, stains and lacquers, and gravure inks. It provides a good balance of properties where economics are of paramount concern.
ACUMIST® D-9
ACUMIST® D-9 is a micronized polyethylene homopolymer for use general purpose solvent borne coatings, stains and lacquers, and gravure inks. It provides a good balance of properties where economics are of paramount concernMostlu used in Gravure inks for slip and rubs.
ACUMIST® P-10
ACUMIST® P-10 is micronized polypropylene for matting and non-skid or non-slip applications for industrial solvent coatings. It provides an excellent abrasion resistance and used in powder coating for matting and scratch resistance.
DISPONER 904S
DISPONER 904S is a highly effective in preventing floating of titanium dioxide pigments in paint formulate ions also containing colored pigments.
DISPONER 912
DISPONER 912 is a most effective wetting and dispersing additive improve the wetting of pigment surfaces, wood surfaces and organically treated Bentonites.
DISPONER 9250
DISPONER 9250 is a copolymer with acidic groups, it is particularly effective in the wetting of inorganic pigment or filler therefore reduces viscosity of coating system.
DISPONER 9850
DISPONER 9850 is suitable for organic pigment in solvent based coating system, exhibit good wetting and dispersing performance.
DISPONER W-18
DISPONER W-18 is a non-ionic wetting, dispersing, anti-floating, anti-flooding and emulsion stabilizer for waterborne systems.
DMBA
DMBA chemical name is N-benzyl-dymethylamine. It is a chemical intermediate. Its main applications are phenolic resins, improvement of the dimensional stability, a hitachi Chem., a Hardener for composites and an aviation Mat.
DOWSIL™ 106F ADDITIVE
DOWSIL™ 106F ADDITIVE is an organic modified silicone foam control additivem, appears in a smooth, milky white liquid. DOWSIL™ 106F ADDITIVE display a great compatibility, low tendency to cause craters, alos have the ability for micro-bubble defoaming. Even with low dosage used. DOWSIL™ 106F ADDITIVE is commonly used in waterborne wood coatings, inks, industrial coatings and overprint varnishes (OPV) applications. Order a sample today with you new product development.
DOWSIL™ 2-1912 FLUIDS
DOWSIL™ 2-1912 FLUIDS is a release coating, made from polydimethylsiloxane and high molecular weight silicone resin. DOWSIL™ 2-1912 FLUIDS offers the benefits of being very easy to use, doesn't discolour molded parts, solvent dilutable & provides heat stable, noncarbonizing, non-oily parting film. DOWSIL™ 2-1912 FLUIDS is perfect to use in plastics, adhesives, and elastomeric products, and polish additive application.
DOWSIL™ 20 RELEASE COATING
DOWSIL™ 20 RELEASE COATING acts as a release coating agent made from polydimethylsiloxane and high molecular weight silicone resin in solvent. DOWSIL™ 20 RELEASE COATING displays the benefit of easy to use, solvent dilutable, not discoloring the molded part, and most importantly, it provides heat-stable, non-carbonizing, and non-oily parting film. DOWSIL™ 20 RELEASE COATING is perfect for use in the application of plastics, adhesives, and elastomeric products.
DOWSIL™ 2080 RESIN
DOWSIL™ 2080 RESIN is a silicone resin with optimized structure to reduce self-condensation tendency. It is suitable to modify powder form polyester resin.
DOWSIL™ 210S ADDITIVE
DOWSIL™ 210S ADDITIVE is an ultra-high molecular weight silicone dispersion in water with improved compatibility and low tendency to cause craters. DOWSIL™ 210S ADDITIVE displays the benefits of Improved mar and scratch resistance, Enhanced anti-blocking, Good compatibility, Less tendency to cause craters & Easy to use. DOWSIL™ 210S ADDITIVE is perfect for your next new product development in waterborne wood coatings.
DOWSIL™ 23N ADDITIVE
DOWSIL™ 23N ADDITIVE is a silicone additive, that display a resistant to scratching and general marking, also provides a matt finish to the end use. DOWSIL™ 23N ADDITIVE is great for the application in solvent and aqueous coatings for touch modification, imparts mar and abrasion resistance. Order a sample today with you new product development.
DOWSIL™ 29 Additive
DOWSIL™ 29 Additive is a carbinol functional silicone glycol surfactant used to provide leveling and wetting and improve gloss. DOWSIL™ 29 ADDITIVE displays the great benefits of enhancing the flow, leveling & gloss, highly compatible with acrylic, epoxy, polyesters, and urethane systems & can prevent pigment flotation. DOWSIL™ 29 ADDITIVE is perfect to use in the application for ink, & coating production.
DOWSIL™ 3 Additive
DOWSIL™ 3 ADDITIVE is a silanol functional silicone resin for dispersion of inorganic pigment to prevent flooding and floating. DOWSIL™ 3 ADDITIVE display the features and benefits of highly effective at low concentrations, low viscosity, improves color consistency, good cost-in-use versus competition, flexibility in formulating & easy to incorporate. DOWSIL™ 3 ADDITIVE is perfect for solvent based wood coating & industrial coating.
DOWSIL™ 3037 INTERMEDIATE
DOWSIL™ 3037 INTERMEDIATE is made from Phenyl, methyl silicone, and methoxy functional that reacts with organic resins to improve weatherability, or other silicone resins to reduce VOCs and improve flexibility. DOWSIL™ 3037 INTERMEDIATE is great to use in the application for coil coatings and appliance and high-temperature finishes.
DOWSIL™ 3074 INTERMEDIATE
DOWSIL™ 3074 INTERMEDIATE is a solventless liquid resin, that is compatible with organic resins such as polyesters, alkyds, epoxies, and acrylics. DOWSIL™ 3074 INTERMEDIATE is used in combination with organic resins via cold blends or pre-reaction to improve weatherability and heat resistance or with phenyl-containing silicone resin as a reactive diluent for low VOC high-temperature coatings. DOWSIL™ 3074 INTERMEDIATE is great to use in the application of silicone intermediate for coil coatings, appliance finishes, industrial maintenance coatings, protective Coatings, high-temperature applications, OEM coatings & Cookware/Bakeware Coatings.
DOWSIL™ 402LS ADDITIVE
DOWSIL™ 402LS ADDITIVE is a silicone polyether-based additive that has multi-functional benefits including improvements in leveling, slip, anti-blocking, and applied hiding. DOWSIL™ 402LS ADDITIVE is perfect for application in Architectural, Industrial metal and wood, Ink and overprint varnish and pigmented, and clear formulations.
DOWSIL™ 51 Additive
DOWSIL™ 51 ADDITIVE is a water-dispersible, ultra-high-molecular-weight poly dimethyl silicone dispersion that imparts slip and mar resistance. DOWSIL™ 51 ADDITIVE reduces the coefficient of friction, provides anti-blocking, and improves mar resistance for the application in ink, coating, and paint product production.
DOWSIL™ 510 FLUID
DOWSIL™ 510 Fluid demonstrate exceptional high-temperature stability during continuous use at 232°C (450°F); these materials are also suitable for low-temperature applications requiring pour points as low as -57°C (-70°F).
DOWSIL™ 52 Additive
DOWSIL™ 52 ADDITIVE is an ultra-high molecular weight silicone dispersion with APEO-free and appears in a flowable liquid for processing ease. DOWSIL™ 52 ADDITIVE offers the benefits and features with great compatibility with waterborne-based coatings, recoatable, easy to incorporate/disperse, good slip, abrasion resistance, scratch resistance, and anti-blocking. DOWSIL™ 52 ADDITIVE is great to use in the application for wood coatings, inks overprint varnishes & Interior and exterior paints.
DOWSIL™ 5314 INTERMEDIATE
DOWSIL™ 5314 INTERMEDIATE is an intermediate for upgrading acrylic emulsions & provides improved outdoor weatherability. DOWSIL™ 5314 INTERMEDIATE can improves chalk resistance, gloss and color retention for coating application.
DOWSIL™ 56 Additive
DOWSIL™ 56 Additive is a siloxane additive that eliminates microfoam in solvent-based systems and acts as a leveling agent. DOWSIL™ 56 ADDITIVE displays the benefits of delivering outstanding antifoam efficiency at elevated temperatures, eliminating microfoam, improving leveling and increasing gloss, improves mar resistance. DOWSIL™ 56 ADDITIVE is perfect to use the application for paint, coating, and ink production.
DOWSIL™ 57 Additive
DOWSIL™ 57 Additive is an additive made from non-reactive silicone glycol copolymer surfactant supplied at 100 percent active concentration. DOWSIL™ 57 Additive provides slip, gloss enhancement, pigment treatment and leveling, mar resistance, compatible with acrylic, alkyd, amide, epoxy, nitrocellulose, phenolic, polyester, polyurethane and vinyl systems, and recoatable when used as directed. DOWSIL™ 57 Additive is good for ink, paint, and coating applications.
DOWSIL™ 61 NW ADDITIVE
DOWSIL™ 61 NW ADDITIVE is a silicone hammertone additive, appears in a clear, colourless liquid. DOWSIL™ 61 NW ADDITIVE displays a pleasing decorative appearance to poorly finished metal surface. DOWSIL™ 61 NW ADDITIVE is used in imparts a hammer tone finish effect for solvent based paints.
DOWSIL™ 62 ADDITIVE
DOWSIL™ 62 ADDITIVE is a water-based silicone foam controlling agent. DOWSIL™ 62 ADDITIVE displays the features of providing highly effective and long-lasting foam control, readily dispersible in water-based inks and coatings, good compatibility with low tendency to cause defects & very low tendency to affect coating gloss. DOWSIL™ 62 ADDITIVE is great to use in inks and coatings applications.
DOWSIL™ 65 ADDITIVE
DOWSIL™ 65 ADDITIVE is a water-based silicone defoamer that appears in a milk-white, creamy emulsion. DOWSIL™ 65 ADDITIVE displays the benefits of improving leveling, wetting, mar resistance, and slip. DOWSIL™ 65 ADDITIVE is great for ink and coating applications.
DOWSIL™ 67 ADDITIVE
DOWSIL™ 67 ADDITIVE is a silicone wetting agent, that provides a low viscosity, surface tension & soluble in water. DOWSIL™ 67 ADDITIVE is great for application in water-borne coatings and printing.
DOWSIL™ 84 ADDITIVE
DOWSIL™ 84 ADDITIVE is a silicone additive that imparts good tensile strength, good elongation, improves coefficient of friction, good weathering properties & improves gloss and mar resistance. DOWSIL™ 84 ADDITIVE is perfect for aqueous ink applications and may be used as a protective and water-resistant coating.
DOWSIL™ 8590 Additive
DOWSIL™ 8590 ADDITIVE acts as a silicone foam control additive, and appears in a colorless to light amber liquid. DOWSIL™ 8590 ADDITIVE displays the benefits of performing at low dosages, over a wide temperature range, also provides a low viscosity that allows for easy dispersibility and may provide improved corrosion and blister resistance. DOWSIL™ 8590 ADDITIVE is most commonly used in waterborne paints, inks, and metal coatings. Order a sample today with your new product development.
DOWSIL™ 87 Additive
DOWSIL™ 87 ADDITIVE is a silane-based additive made from 40% actives silane-based emulsion. DOWSIL™ 87 ADDITIVE is compatible with acrylic resins & solvents and is APEO-free. DOWSIL™ 87 ADDITIVE is commonly used in waterborne acrylic formulations to improve water repellency and hydrophobic waterborne decorative coating, also being used in metal protective coatings (Acrylic, styrene acrylic, vinyl acrylics) with minimal effect on water vapor permeability and high dirt pickup resistance.
DOWSIL™ 88 Additive
DOWSIL™ 88 Additive is a water repellency made from a 98% active, silane/siloxane blend. DOWSIL™ 88 Additive is commonly used in polar and non-polar solvent-containing acrylic formulations to improve water repellency and in solvent-borne decorative coatings.
DOWSIL™ GP SHP 60 PLUS
DOWSIL™ GP SHP 60 PLUS is a free-flowing powder designed to improve hydrophobic performance for cementitious dry-mix powder applications. DOWSIL™ GP SHP 60 PLUS display the features and benfits of aasy to disperse in water, easy to mix in powered composition, prevents efflorescence aesthetical problems by reducing the transport of water-soluble salts and makes cement-based materials more hydrophobic. DOWSIL™ GP SHP 60 PLUS is mostly commonly used in cement-based compositions and used to reduce the capillary movement of liquid water in grouts, joint fillers, mortar, EIFS, stucco, and facade-render.
DOWSIL™ HV495 EMULSION
DOWSIL™ HV495 EMULSION is an aqueous silicon emulsion, appear in a milky white liquid. DOWSIL™ HV495 EMULSION displays the benefits of providing an excellent thermal stability, easy application, good slip characteristics, imparts greasy hand feel to leather surface, good abrasion resistance, excellent dilution stability, high gloss/color intensity & good surface wetting characteristics. DOWSIL™ HV495 EMULSION is commonly used in the hand modifier in water-based top finishing formulations for leather treatment, also provides abrasion resistance and gloss.
DOWSIL™ HV496 EMULSION
DOWSIL™ HV496 EMULSION is a high molecular weight, silanol functional siloxane polymer emulsion with low cyclic siloxane content. DOWSIL™ HV496 EMULSION display the benefits of improved tear strength on woven fabric, improved crease resistance, improved abrasion resistance, improved stretch recovery of knitted garments, fabric whiteness retention, excellent thermal stability, easy application, excellent dilution stability and great surface wetting characteristics. DOWSIL™ HV496 EMULSION is great to use in textiles, leather, auto/home care and mineral wool/fiberglass hydrophobing applications.
DOWSIL™ IE-6682
DOWSIL™ IE-6682 is an impregnation sealer for masonry and cementitious surfaces, that appears in a milky white oil in water silane emulsion. DOWSIL™ IE-6682 is suitable for imparting water repellency to porous construction materials such as fiber-reinforced cement boards, bricks, concrete blocks, mortar, and grout substrates which can be subsequently painted or rendered.
DOWSIL™ IE-6683
DOWSIL™ IE-6683 is a 40% active, water-dilutable silicone emulsion used as a water repellent for porous construction materials. DOWSIL™ IE-6683 displays the benefits of fast beading action, low VOC, easy to use, and environmentally friendly & highly dilutable. DOWSIL™ IE-6683 is great for the formulation of water-repellent, water-based primers, paints, and coatings.
DOWSIL™ RSN-0806 RESIN
DOWSIL™ RSN-0806 RESIN is a silanol-functional resin that is supplied as a solvent solution. DOWSIL™ RSN-0806 RESIN displays the features of highly stable, high-temperature performance and can be used alone or blended with other silicone resins. DOWSIL™ RSN-0806 RESIN is great to use in applications including colored baking enamels for space heaters & stoves, maintenance paints, colored baking enamels, and decorative finishes.
DOWSIL US-CF-2403 RESIN
DOWSIL US-CF-2403 Resin is a high-performance alkoxy-siloxane binder that enhances heat resistance and durability in protective coatings for metal, wood, and glass surfaces, offering room-temperature curing and strong moisture resistance.
DOWSIL™ Z-6121 SILANE
DOWSIL™ Z-6121 SILANE is a silane adhesion promoter made from 62% active and 34% solids in alcohol. DOWSIL™ Z-6121 SILANE displays the benefits of eliminating the oven cure normally required to develop optimum properties, improves adhesion and salt-spray resistance of epoxy coatings, and improves adhesion of alkyd finishes to glass. DOWSIL™ Z-6121 SILANE is suitable for use in epoxy coating, silicone resin-based coatings, and alkyd coatings.
DOWSIL™ Z-6689
DOWSIL™ Z-6689 is an active component for formulating penetrating water-repellent treatments. DOWSIL™ Z-6689 offers the benefits of being dilutable in organic solvent, producing a hydrophobic treatment, UV stable, excellent performance at low active solids levels & reduction in water absorption reducing cracking and spalling due to freeze-thaw and efflorescence, thereby increasing the life of the substrate and more. DOWSIL™ Z-6689 is suitable to use on neutral and alkaline mineral substrates such as brick, sandstone, concrete, and mortar that require water repellency.
DURASOL 310
DURASOL 310 solution produces a hard, clear film of limited flexibility. It is ideal for exterior use as it has excellent resistance to weathering, UV light, water, and alkalis. It may be used for the preparation of clear and pigmented systems onto a variety of substrates, including concrete, masonry, and structural steel work. In particular, this resin forms an ideal base for simple pigmented paints for metals such as galvanized iron and steel work. It has also been widely used as a clear anti-graffiti coating.
DURASOL™ 330
DURASOL™ 330 is a thermoplastic acrylic resin solution specially developed in a ready-to-use, low odour version for use particularly in enclosed areas where solvent odour build-up would normally be a problem. It provides a hard, yet flexible film, though films will generally have poorer weathering and UV resistance compared with products manufactured in aromatic solvents, such as xylene. Applications include interior and exterior clear coatings and pigmented finishes for protecting concrete and masonry, slate sealers and coatings for pavers.
DURASOL 362/21RX
DURASOL 362U/24RX thermoplastic acrylic resin solution is a ready-to-use formulation that produces a hard, yet flexible clear film. It is non-yellowing, has excellent resistance to water, and alkalis, and contains a UV absorber to improve protection against UV light. It is ideally suited for clear and pigmented coatings on a wide range of substrates, such as concrete, masonry, pavers, and slate sealers.
DURASOL 362U
DURASOL 362U acrylic solution produces a hard, clear film of limited flexibility. It has excellent resistance to weathering, water, and alkalis, is non-yellowing, and contains a UV absorber to maximize protection against UV light. It is ideally suited for use on patterned paved driveways and other flooring areas where strong sunlight is expected and where pale or pastel colors are to be used. It has quick drying and fast solvent release characteristics that allow faster return of flooring to usable service. Surfaces are especially resistant to tire marking.
DURASOL 376
DURASOL 376 thermosetting acrylic resin solution has fast film-forming capability producing a durable and flexible, hard, clear film. It is specially designed as a sealant in the “wet on wet” manufacture of concrete roof tiles at high Tg. It can also be used for non-roof tile applications, including general-purpose concrete and masonry coating. It has excellent resistance to water, alkalis, weathering, and UV light.
DURASOL 376/25X
DURASOL 376/25X thermosetting acrylic resin solution has fast film-forming capability producing a durable and flexible, hard, clear film. It is specially designed as a sealant in the “wet on wet” manufacture of concrete roof tiles at high Tg. It can also be used for non-roof tile applications, including general-purpose concrete and masonry coating. It has excellent resistance to water, alkalis, weathering, and UV light.
DURASOL 386
DURASOL 386 is a hydroxyl functional acrylic solution specifically designed for a 2-pack system with aliphatic polyisocyanates to produce superior performance coatings on metal, wood, and plastic substrates. This product has a lower level of hydroxyl functionality requiring a proportionately lower level of isocyanate for complete cross-linking for a lower-cost product. Nevertheless, the resultant acrylic urethane coatings are very glossy, hard, and chemical resistant, and possess excellent durability and color retention.
DURASOL™ 392
DURASOL™ 392 is a hydroxy functional acrylic solution specifically designed for use in a 2 pack system with aliphatic polyisocyanates to produce superior performance coatings on metal, wood and plastic substrates. The resultant acrylic urethane coatings are very glossy, hard, solvent and chemical resistant and possess excellent durability and colour retention.
DURASOL 500
DURASOL 500 thermoplastic acrylic solution is a modification of our widely used Durasol 310 that has been internally modified to give a more flexible film. It produces hard, very flexible, but highly durable coatings with excellent gloss retention. It is ideally suited for external use in clear or pigmented coatings on a variety of substrates. Applications include concrete, masonry, and steelwork coating.
DURASOL 500/24RX
DURASOL 500/24RX thermoplastic acrylic solution is a modification of our widely used Durasol 310 that has been internally modified to give a more flexible film. It produces hard, very flexible, but highly durable coatings with excellent gloss retention and is ideally suited for use in clear or pigmented coatings on a variety of substrates. Applications include concrete and masonry protection, slate sealers, and coatings for pavers.
DURASOL 802HV
DURASOL 802HV thermoplastic acrylic co-polymer solution specially designed in a high viscosity version for the preparation of lower-cost general industrial, masonry, and concrete coatings, in clear or pigmented finishes. It produces hard, very flexible, glossy, water and alkali-resistant films (especially with golden pigments) and may be modified with a plasticizer if desired. The inclusion of a UV additive is recommended if optimum exposure properties are required.
DURASOL 810
DURASOL 810 is an acrylic-modified co-polymer solution developed and designed for use in both interior and exterior clear and pigmented coating. Provides a hard flexible film, excellent water, and alkali resistant, and contains and UV absorber to maximize protection from ultraviolet light.
DURASOL 814
DURASOL 814 acrylic solution is specially formulated for cold road marking paint producing a hard clear film of limited flexibility. It has excellent resistance to water, alkalis, weathering, and UV light. Applications include the preparation of clear or pigmented coatings for concrete, masonry, galvanized iron, and steel work.
DURASOL 832
DURASOL 832 is an acrylic-modified co-polymer solution developed and designed in a low-viscosity, low-odor version for use, particularly in enclosed areas where solvent odor build-up would normally be a problem. It provides a hard, high gloss, flexible film with excellent resistance to weathering, water, and alkalis. Applications include both interior and exterior clear coatings and pigmented finishes to masonry, providing excellent adhesion, especially for re-priming masonry where a low PVC emulsion top-coat is to be applied.
DYNAPOL® LH 775-52
DYNAPOL® LH 775-52 polyester resins are mainly used for stoving enamels in combination with amino resins. DYNAPOL® LH 775 is also used as binder or co-binder, in many kinds of flexible packaging applications like pre-printing primers, printing inks or as a component for heatseal lacquers. Suitable applications include metal decorating enamels, tube- and aerosol can coatings.
EASTMAN TEXANOL™ ESTER ALCOHOL
EASTMAN TEXANOL™ ESTER ALCOHOL is a premier coalescent for latex paints. It performs well in all types of latexpaints, in a variety of weather conditions, and over substrates with different levels of porosity. EASTMAN TEXANOL™ ESTER ALCOHOL provides the highest level of film integrity at low levels of coalescence, enhancing the performance properties of the paint including low-temperature coalescence, touch-up, scrub resistance, washability, colour development, thermal flexibility, and resistance to mud cracking. EASTMAN TEXANOL™ ESTER ALCOHOL also enhances thickening efficiency when used with associative thickeners.
EMULTEX 4030
EMULTEX 4030 is a good pigment binding power for general-purpose interior coatings.
EMULTEX KR 37
EMULTEX KR 37 is a good wet tack for adhesive applications.
EPOXY NPEF 170
EPOXY NPEF 170 is a BPF-type epoxy resin, it provides low viscosity/high flow characteristics suited for use in non-solvent (100% solid) applications for coatings, molding, etc. Flexibility and adhesive strength are also increased making EPOXY NPEF 170 resin excellent for use in civil engineering, and electrical insulation materials.
EPOXY NPEF 180
EPOXY NPEF 180 is a bisphenol F epoxy resin blended with bisphenol A epoxy resin. The low viscosity allows high filler loading and gives a good wetting effect. EPOXY NPEF 180 can be blended with common epoxy resins. Cured with polyamines or polyamides at ambient conditions, it provides good levels of chemical resistance and physical properties.
EPOXY NPEL 127E
EPOXY NPEL 127E is an undiluted resin with a lower viscosity than NPEL-128E but provides similar properties after cure. Cured with polyamine or polyamide, it offers quality and high-purity properties in applications, such as maximum mechanical strength, good chemical resistance excellent heat resistance, etc. Because of its low chloride content, NPEL-127E is more suitable for electronic applications.
EPOXY NPEL 128E
EPOXY NPEL 128E is a high-purity liquid resin, which is manufactured from bisphenol A and epichlorohydrin. It is recognized as a standard form in which variations have been developed. Cured NPEL-128E always offers quality and high-purity properties in applications, such as maximum mechanical strength, good chemical resistance excellent heat resistance, etc.
EPOXY NPSN 134X80
EPOXY NPSN 134X80 is an epoxy resin diluted in xylene.
EPOXY NPSN 301X75
EPOXY NPSN 301X75 is an epoxy resin diluted in xylene.
EPOXY RESIN YN-1828
EPOXY RESIN YN-1828 is a medium viscosity liquid epoxy resin (11-15 Pa.s) and it contains no diluents. YN-1828 provides good pigment wetting good resistance to filler settling and a high level of mechanical and chemical resistance properties in the cured state. However, as an unmodified pure bisphenol A resin, YN-1828 is prone to crystallize on storage, particularly in cold conditions.
ESACURE 1001M
ESACURE 1001M is a difunctional Type II photoinitiator of the ketosulphone class. It is used to initiate radical polymerisation of unsaturated oligomers e.g. acrylates after UV exposure.
ESACURE 1187
ESACURE 1187 is a modified sulphonium salt hexafluorophosphate diluted in 25% propylene carbonate, which does not release any benzene upon cure.
ESACURE KIP 100F
ESACURE KIP 100F is a liquid mixture of ESACURE KIP 150 (70% ) and OMNIRAD 1173 (30%) and is particularly recommended for high reactivity, low odour and colour stability.
ESACURE KIP 150
ESACURE KIP 150 is an oligomeric polyfunctional a-hydroxyketone characterised by high reactivity and non-yellowing properties. It is particularly recommended when low VOC, low odour and low yellowing are required characteristic.
ESACURE KIP 160
ESACURE KIP 160 is a new photoinitiator characterised by excellent reactivity especially in comparison with conventional alpha hydroxy ketones. Its molecule was suited to shift the absorption spectrum to longer wavelenght and to work perfectly with pigmented systems using conventional UV equipments. It shows a good performance with clear coatings too. Esacure KIP 160 is suitable for all systems where low VOC, low migration and low extraction values are needed.
ESACURE KIP 75LT
ESACURE KIP 75LT is a liquid mixture of ESACURE KIP 150 (75%) and Tripropyleneglycoldiacrylate (25%). It is an oligomeric polyfunctional α-hydroxy ketone characterized by high reactivity and non-yellowing properties. It is particularly recommended when low odor is a required characteristic.
ESACURE KT-55
ESACURE KT-55 is a liquid mixture of ESACURE TZT (50%) and ESACURE KIP 150 (50%). It is used in combination with a co initiator and is particularly suitable when high reactivity and low yellowing are required.
ESACURE KTO 46
ESACURE KTO 46 is a stable liquid mixture of Trimethylbenzoyldiphenylphosphineoxide and �- hydroxy ketones and Benzophenone derivatives.It is particularly indicated for the photopolymerisation of UV curable pigmented systems when high reactivity, low curing odour and low yellowing are required.
ESACURE ONE
ESACURE ONE is a difunctional alpha-hydroxy ketone photoinitiator. It is a highly reactive difunctional photoinitiator particularly suitable for clear systems. Due to its molecular structure it is particularly suitable for all systems where low VOC, low migration and low extraction values are needed (food packaging).
ESACURE TZT
ESACURE TZT is particularly indicated for the photo polymerisation of UV curable systems when high reactivity, low curing odour and low yellowing are required. The radical generation occurs via hydrogen abstraction by the action of a co-initiator such as tertiary amines.
EXOLIT 855
EXOLIT 855 is a proprietary mixture containing liquid partial phosphoric acid esters for intumescent transparent fire protection for wood.
EXOLIT AP 422
EXOLIT AP 422 is a fine-particle ammonium polyphosphate (phase II) produced by a special method. The product is largely insoluble in water and completely insoluble in organic solvents. It is colourless, non-hygroscopic and non-flammable.
AddWorks® LXR™ 308 AP
AddWorks® LXR™ 308 AP is a light stabilizer solution for solventborne clearcoats.
ADHERANT ADP
ADHERANT ADP is an additive to improve the adhesion of paint film, especially on non-ferrous substrates. It is mainly used in stoving paints.
AEROSIL® 200
AEROSIL® 200 hydrophilic fumed silica, surface area 200m2/g. Widely usable in a broad range of applications.
FLUBE CA 140
FLUBE CA 140 is a calcium salt of polymer of naphthalenesulphonic acids condensed with formaldehyde.
FLUBE CA 140 F
FLUBE CA 140 F is a calcium salt of polymer of naphthalenesulphonic acids condensed with formaldehyde.
FLUBE CA 40 F
FLUBE CA 40 F is a calcium salt of polymer of naphthalenesulphonic acids condensed with formaldehyde.
FLUBE CA-40
FLUBE CA-40 is a calcium salt of polymer of naphthalenesulphonic acids condensed with formaldehyde.
FLUBE CR 100 F
FLUBE CR 100 F is super-plasticizer for concrete mixes.
FLUBE OS 139 F
FLUBE OS 139 F is a sodium salt of polymer of naphthalene-sulphonic acids condensed with formaldehyde.
FLUBE OS-39
FLUBE OS-39 is a sodium salt of polymer of naphthalenesulphonic acids condensed with formaldehyde.
GAP 1E
GAP 1E is a leafing aluminum pigment in paste. It has irregular flakes of medium particle size. It is a solvent: Mineral spirit. GAP Line are versatile aluminum pastes and powders available in different particle sizes for leafing and non-leafing, ideal for industrial applications. Its main applicaitons are aluminium leafing and non-leafing for low end (hammer effect and protective) solvent-born.
Luna-sil ES-740
Luna-sil ES-740 is a valuable ingredient for manufacturers of chemical-resistant and heat-resistant coatings. Luna-sil ES-740 can also be applied to construction materials such as natural stone, to increase their strength.
