Home / Paint & Coatings / Suppliers / Clariant Plastics & Coatings Ltd.
Paint & Coatings
Clariant Plastics & Coatings Ltd.
Clariant Plastics & Coatings Ltd. lists 65 grades in Paint & Coatings. The sheets saved on this site are below.
Grades from Clariant Plastics & Coatings Ltd.
Ceridust® 1060 TP
Ceridust® 1060 TP is a micronized polar modified wax based on renewable resource.
Ceridust® 2051
Ceridust® 2051 is a micronized synthetic wax.
Ceridust® 3251
Ceridust® 3251 is a micronized, modified polyethylene wax.
Ceridust® 3610
Ceridust® 3610 is a micronized high density polyethylene wax.
Ceridust® 3620
Ceridust® 3620 is a micronized polyethylene wax.
Ceridust® 3715
Ceridust® 3715 is a micronized, polar modified polyethylene wax recommended for solvent and water based coatings and inks.
Ceridust® 3910
Ceridust® 3910 is a micronized amide wax.
Ceridust® 3920 F
Ceridust® 3920 F is a micronized, polytetrafluoroethylene modified polyethylene wax.
Ceridust® 5551
Ceridust® 5551 is a micronized, partly saponified ester of montanic acids.
Ceridust® 6721
Ceridust® 6721 is a micronized, amide modified polypropylene wax.
Ceridust® 8020
Ceridust® 8020 is a micronized, highly modified copolymer wax.
Ceridust® 9202 F
Ceridust® 9202 F is a micronized polytetrafluoroethylene.
Ceridust® 9205 F
Ceridust® 9205 F is a micronized polytetrafluorethylene.
Ceridust® 9615 A
Ceridust® 9615 A is a micronized blend of polyethylene and amide wax.
Ceridust® 9630 F
Ceridust® 9630 F is a polytetrafluoroethylene modified polyethylene wax.
Exolit® AP 420
Exolit® AP 420 is an approx. 45 % clear to cloudy aqueous solution of a short-chain ammonium polyphosphate.
Exolit® AP 422
Exolit® AP 422 is a fine-particle ammonium polyphosphate (phase II) produced by a special method. The product is largely insoluble in water and completely insoluble in organic solvents. It is colourless, non-hygroscopic and non-flammable.
Exolit® AP 423
Exolit® AP 423 is a fine-particle ammonium polyphosphate produced by a special method. The crystal modification is phase II. The product is largely insoluble in water and completely insoluble in organic solvents. It is a white powder, non-hygroscopic and non-flammable.
Exolit® AP 462
Exolit® AP 462 is a product based on ammonium polyphosphate. The crystal modification is phase II. It is manufactured from ammonium polyphosphate by micro-encapsulation with melamine resin according to Clariant’s own method. Exolit® AP 462 is a fine-particle white powder with very low solubility in water, even at elevated temperatures. It is completely insoluble in organic solvents. The product is non-hygroscopic and non-flammable.
Exolit® AP 740
Exolit® AP 740 is a white free flowing powder. It is a non-halogenated additive flame retardant based on ammonium polyphosphate which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® AP 740 differs in its mode of action from chlorine or bromine containing flame retardants by achieving its effect through intumescence. The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat-insulating effect and reduces further oxygen access.
Exolit® AP 740 F
Exolit® AP 740 F is a white free flowing powder. It is a non-halogenated additive flame retardant based on ammonium polyphosphate which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® AP 740 F differs in its mode of action from chlorine or bromine containing flame retardants by achieving its effect through intumescence. The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat-insulating effect and reduces further oxygen access.
Exolit® AP 750
Exolit® AP 750 is a non-halogenated flame retardant based on ammonium polyphosphate as main component, which develops its effectiveness through phosphorus/nitrogen synergism. In contrast to similar competitive material, it shows high processing stability. Exolit® AP 750 differs in its mode of action from non phosphorus-based flame retardants (e. g. brominated, chlorinated or mineral FRs like ATH) by achieving its effect through intumescence. Material containing Exolit® AP 750 will foam on exposure to flame. The carbon-rich foam layer so formed will protect the polymer and in many cases the substrate below through its heat-insulating effect, reduces further oxygen access and prevents dripping in case of a thermoplastic based formulation. Beyond the primary effects on fire behavior such as reduction of flame propagation rate, rate of heat release, dripping behavior, residual lengths of test specimens after flame tests etc., positive secondary fire effects such as low smoke density, no release of corrosive off-gases, lower formation of toxic smoke gases are of great interest.
Exolit® IFR 36
Exolit® IFR 36 is a non-halogenated flame retardant based on ammonium polyphosphate, which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® IFR 36 differs in its mode of action from chlorine- or bromine-containing flame retardants by achieving its effect through intumescence. The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat insulating effect and reduces further oxygen access.
AddWorks® LXR™ 308 AP
AddWorks® LXR 308 AP is an optimized mixture of an UV absorber with radical scavenger (HALS), mostly suitable for low color solventborne clearcoats and UV cured coatings applicatons.
