Home / Paint & Coatings / Suppliers / BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料

Paint & Coatings

BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料

BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 lists 377 grades in Paint & Coatings. The sheets saved on this site are below.

Listed grades377
Sheets here124
Formulas here0
PAINT & COATINGS SUPPLIER BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料

Grades from BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料

Basonat® HB 100

ingredients

Basonat® HB 100 is an aliphatic polyisocyanate for lightfast and weather-resistant two-pack polyurethane coatings. It is composed of biurets of polyisocyanates based on hexamethylene diisocyanate. Basonat® HB 100 is used to formulate coatings in which the solvents contained in the other Basonat® HB grades would prove troublesome such as aromatic hydrocarbons excessively solubilizing polystyrene.

Basonat® HB 175 MP/X

ingredients

Basonat® HB 175 MP/X is an aliphatic polyisocyanate for lightfast and weather-resistant two-pack polyurethane coatings. It is composed of biurets of polyisocyanates based on hexamethylene diisocyanate and approximately 75 % solution in a 1:1 blend of 1-methoxy-2-propyl acetate and xylene. This product is used to formulate particularly lightfast and weather-resistant coatings. Aliphatic polyisocyanates are sometimes even used in primers for difficult substrates such as aluminum or various plastics, when composites are to be coated.

Basonat® HB 175 MP/X

ingredients

Basonat® HB 175 MP/X is an aliphatic polyisocyanate for lightfast and weather-resistant two-pack polyurethane coatings. It is composed of biurets of polyisocyanates based on hexamethylene diisocyanate. This product is approx. 75% solution in a 1:1 blend of 1-methoxy-2-propyl acetate and xylene.

Basonat® HB 275 B

ingredients

Basonat® HB 275 B is an aliphatic polyisocyanate for lightfast and weather-resistant two-pack polyurethane coatings. It is composed of biurets of polyisocyanates based on hexamethylene diisocyanate and is supplied in 75% solid in 25% butyl acetate to cater benzene free working environment. This product is used to formulate particularly lightfast and weather-resistant coatings. Aliphatic polyisocyanates are sometimes even used in primers for difficult substrates such as aluminum or various plastics, when composites are to be coated.

Basonat® HB 475 B/X

ingredients

Basonat® HB 475 B/X is an aliphatic polyisocyanate for lightfast and weather-resistant two-pack polyurethane coatings. It is composed of biurets of polyisocyanates based on hexamethylene diisocyanate and approximately 75 % solution in a 1:1 blend of n-butyl acetate and xylene. This product is used to formulate particularly lightfast and weather-resistant coatings. Aliphatic polyisocyanates are sometimes even used in primers for difficult substrates such as aluminum or various plastics, when composites are to be coated.

Basonat® HI 100

ingredients

Basonat® HI 100 is a solvent-free isocyanurate modified HDI polyisocyanate for weather-resistant and high performance two-pack polyurethane coatings. It is composed of polyisocyanates based on isocyanurated hexamethylene diiso- cyanate. Basonat® HI 100 and Basonat® LR 9046 are solvent-free and thus allow a broad choice of solvents. For instance, when – as in furni- ture coatings – less volatile solvents would retard drying exces- sively, highly volatile solvents can be chosen.

Basonat® HI 100AP

ingredients

Basonat® HI 100AP is a solvent free aliphatic polyisocyanate for lightfast and weather-resistant two-pack polyurethane coatings. It is composed of polyisocyanates based on isocyanurated hexamethylene diiso- cyanate. Basonat® HI 100 ap is solvent-free and thus allows a broad choice of solvents. For instance, when – as in furniture coatings – less volatile solvents would retard drying excessively, highly volatile solvents can be chosen.

Basonat® HI 190 B/S

ingredients

Basonat® HI 190 B/S is an isocyanurate modified HDI polyisocyanate. It is a 90% solution in n-butyl acetate and Solvesso® 100 (1:1) for weather-resistant and high performance two-pack polyurethane coatings. Basonat® HI polyisocyanates are used to crosslink most hydroxy acrylic resins, e. g., Joncryl® grades, and hydroxy polyesters. Basonat® HI 190 B/S ap is solution of Basonat® HI100 ap. Basonat® HI grades are used to formulate particularly lightfast and weather-resistant coatings. Sufficient compatibility with polyester resins containing hydroxyl groups is not always given.

Basonat® HI 190 B/S AP

ingredients

Basonat® HI 190 B/S AP is an aliphatic polyisocyanates for lightfast and weather-resistant two-pack polyurethane coatings. It is a 90% solution in a 1:1 blend of n-butyl acetate and Solvesso®1 100. Basonat® HI grades are used to formulate particularly lightfast and weather- resistant coatings. Sufficient compatibility with polyester resins containing hydroxyl groups is not always given.

Basonat® HI2000 (old name : LR 9046)

ingredients

Basonat® HI 2000 is a solvent-free, low viscosity isocyanurate modified HDI polyisocyanate for high solid, low VOC, weather-resistant and high performance two-pack polyurethane coatings. This product is composed of polyisocyanates based on isocyanurated hexamethylene di-isocyanate. Combined with conventional acrylic resins, a solids content approx. 3 % higher than with Basonat® HI 100 can be achieved. Using high-solids binders such as Joncryl® polyol grades allows the solids content to be increased even further.

Basonat® HW 1180 PC (old name : HW 180 PC)

ingredients

Basonat® HW 1180 PC is a water-emulsifiable polyfunctional isocyanates based on HDI for crosslinking for crosslinking reactive OH group polymer emulsions. It is recommended for waterborne 2k industry coatings. This product is an 80 % solution in Solvenon® PC (propylene carbonate). Basonat® HW grades are used as hardeners for polymeric dispersions containing reactive OH groups.

Basonat® HW 2000 (old name : LR9056)

ingredients

Basonat® HW 2000 is a water-emulsifiable HDI polyfunctional isocyanate for crosslinking reactive OH group polymer emulsions. It is used as a hardener for polymer dispersion containing reactive OH groups.

Basonat® HW 3180 B (old name : LR 9080)

ingredients

Basonat® 3180 B is a water-emulsifiable polyfunctional isocyanate based on isocyanurated hexa-methylene diisocyanate and isophorone diisocyanate, 80% solution in n-butyl acetate. It is used as a co-hardener in combination of hydrophilic HDI based Polyisocyanates for water-based 2K PU Coatings.

Basonol® HPE 1170 B

ingredients

Basonol® HPE 1170 B is a OH functional hyperbranched Polyester to be used as a cobinder in 2K PUR and 1K clear- and pigmented coating 2K systems for improved performance.

Cinquasia® Magenta L 4530 (old: Cinquasia® Magenta B RT-343-D)

ingredients

Cinquasia® Magenta L 4530 (old: Cinquasia® Magenta B RT-343-D) is a saturated bluish magenta with excellent rheology for saturated opaque reds in high-solids automotive paints, also used in metallic finishes. The Colour Index for this quinacridone is Pigment Red 202 | 73907. It is suitable for the following applications: baking finishes, water-based, acrylic/isocyanate, acid-curable, amine-curable, and air-drying.

Cinquasia® Magenta L 4540 (old: Cinquasia® Magenta RT-355-D)

ingredients

Cinquasia® Magenta L 4540 (old: Cinquasia® Magenta RT-355-D) is a very transparent and saturated yellowish magenta, also suitable for UV-curable screen inks. This quinacridone product is suitable for the automotive industry, and it is potentially suitable for general industrial and powder industry use. It is used in baking finishes, water-based, acrylic/isocyanate, acid-curable, amine-curable, and air-drying applications.

Cinquasia® Red L 4100 HD (old: Cinquasia® Red Y RT-759-D)

ingredients

Cinquasia® Red L 4100 HD (old: Cinquasia® Red Y RT-759-D) is an opaque yellowish quinacridone with good outdoor properties. The Colour Index is Pigment Violet 19 | 73900. It is suitable for industries such as automotive, general industrial, coil, powder, and decorative. This product is suitable for the following applications: baking finishes, water-based, acrylic/isocyanate, acid-curable, amine-curable, and air-drying.

Cinquasia® Violet L 4130 (old: Cinquasia® Transparent Red B RT-333-D)

ingredients

Cinquasia® Violet L 4130 (old: Cinquasia® Transparent Red B RT-333-D) is a saturated blue-shade red pigment with good dispersibility, suitable for metallic finishes. It is a quinacridone that is suitable for the following applications: baking finishes, water-based, acrylic/isocyanate, acid-curable, amine-curable, and air-drying.

Cinquasia® Violet L 5110 (old: Cinquasia® Violet R RT-101-D)

ingredients

Cinquasia® Violet L 5110 (old: Cinquasia® Violet R RT-101-D) is a very transparent violet with high color strength for use in mica and aluminum shades in automotive and refinish paints. It is a quinacridone with a Colour Index of Pigment Violet 19 | 73900. This product is suitable for industries such as automotive and general industrial, and it is potentially suitable for the coil, powder, wood, and decorative industries. It is suitable for the following applications: baking finishes, water-based, acrylic/isocyanate, acid-curable, amine-curable, air-drying.

Cinquasia® Violet L 5120 (old: Cinquasia® Violet R NRT-201-D)

ingredients

Cinquasia® Violet L 5120 (old: Cinquasia® Violet R NRT-201-D) is a semi-transparent violet with high color strength for use in mica and aluminum as well as solid shades in automotive and refinish paints. The Colour Index for this quinacridone product is Pigment Violet 19 | 73900. It is suitable for use in automotive, general industrial, coil, powder, and decorative industries. This product is suitable for applications in baking finishes, water-based, acrylic/isocyanate, acid-curable, amine-curable, and air-drying.

Cromophtal® Orange K 2960 (Old: Cromophtal® Orange GP)

ingredients

Cromophtal® Orange K 2960 (Old: Cromophtal® Orange GP) is a clean and strong mid-shade orange disazo condensation for industrial coatings. The Colour Index is Pigment Orange 64 | 12760. This product is suitable for baking finishes, water-based, acrylic/isocyanate, acid-curable, amine-curable, and air-drying applications.

Cromophtal® Scarlet D 3540 (old: Cromophtal® Scarlet RN)

ingredients

Cromophtal® Scarlet D 3540 (old: Cromophtal® Scarlet RN) is a yellow-shade red with standard fastness to light. This semi-opaque azo condensation product has a Colour Index of Pigment Red 166 | 20730. It is suitable for the following industries: offset/lithographic; flexographic/gravure, solvent-based; flexographic/gravure, water-based; and UV-curable.

Cromophtal® Violet D 5700 (old: Cromophtal® Violet B)

ingredients

Cromophtal® Violet D 5700 (old: Cromophtal® Violet B) is a strong red-shade dioxazine violet with very good dispersibility for application in printing inks. The Colour Index is Pigment Violet 37 | 51345. This product is suitable for the following applications: flexographic/gravure inks, solvent-based; lithographic inks; and UV-curable inks. It is potentially suitable for flexographic/gravure inks, water-based.

Cromophtal® Violet D 5800 (old: Cromophtal® Violet GT)

ingredients

Cromophtal® Violet D 5800 (old: Cromophtal® Violet GT) is a red-shade dioxazine violet with high transparency and color strength for application in printing inks. The Colour Index is Pigment Violet 23 | 51319. This product is suitable for the following applications: flexographic/gravure inks, solvent-based; flexographic/gravure inks, water-based; lithographic inks; and UV-curable inks.

Cromophtal® Yellow L 0990 (old: Cromophtal® Yellow 8GN)

ingredients

Cromophtal® Yellow L 0990 (old: Cromophtal® Yellow 8GN) is a pure transparent yellow pigment with high color strength and good resistance to weathering in medium tints for application in coatings. The Colour Index is Pigment Yellow 128 | 20037. This disazo condensation is suitable for baking finishes, water-based, acrylic/isocyanate, amine-curable, and air-drying applications.

Cromophtal® Yellow L 1060 HD (old: Paliotol® Yellow L 1060 HD)

ingredients

Cromophtal® Yellow L 1060 HD (old: Paliotol® Yellow L 1060 HD) is an opaque greenish benzimidazolone yellow for industrial coatings. The Colour Index is Pigment Yellow 151 | 13980. It is suitable for the following applications: baking finishes, acrylic/isocyanate, acid-curable, and air-drying.

Cromophtal® Yellow L 1061 HD (old: Irgazin® Yellow 2088)

ingredients

Cromophtal® Yellow L 1061 HD (old: Irgazin® Yellow 2088) is a greenish-yellow benzimidazolone with high opacity and good flow properties. The Colour Index for this product is Pigment Yellow 151 | 13980. It is suitable for the following applications: baking finishes, acrylic/isocyanate, acid-curable, and air-drying.

Cromophtal® Yellow L 1084 HD (old: Irgazin® Yellow 2084)

ingredients

Cromophtal® Yellow L 1084 HD (old: Irgazin® Yellow 2084) is a medium-yellow opaque benzimidazolone with good durability in both full shade and reduction. Good rheological characteristics allow good formulation flexibility. The Colour Index for this product is Pigment Yellow 154 | 11781. It is suitable for applications such as: baking finishes, water-based, acrylic/isocyanate, acid-curable, amine-curable, and air-drying.

Acronal® 296 D ap

ingredients

Acronal® 296 D ap is an anionic emulsion polymer with a medium viscosity. It consists of small, finely divided particles. Its compatibility with pigments and extenders is excellent, and it has very high binding power for pigments. Unpigmented films of Acronal® 296 D ap are tack free at room temperature.

Acronal® 296 DS ap

ingredients

Acronal® 296 DS ap is an anionic emulsion polymer with a medium viscosity. It consists of small, finely divided particles. Its compatibility with pigments and extenders is excellent, and it has very high binding power for pigments. Non-pigmented films of this product are tack-free at room temperature. Films formed by Acronal® 296 DS ap are clear, flexible, glossy, and have extremely high water resistance. They are also very resistant to saponification.

Acronal® 7015

ingredients

Acronal ® 7015 is a finely dispersed emulsion polymer that has a medium viscosity. It is a fill with good bond force. It has good flexibility and anti-sticky features on the film.

Acronal® 7016 G

ingredients

Acronal ® 7016 G is an anionic medium viscosity emulsion polymer. It consists of a small pure acrylic copolymer particles composed of an excellent outdoor durability and stain resistance. It enables the coating film to have good scrub resistance, blocking resistance, and on the concrete surface good adhesion.

Acronal® 7026

ingredients

Acronal® 7026 is a finely sized emulsion polymer with a low viscosity. The emulsion forms film, which are highly elastic over a broad temperature range, especially in the cold climate area. Its compatibility with fillers and pigments is excellent, and it has a very high pigment binding power. Films formed by Acronal® 7026 have excellent water, alkali and efflorescent resistance.

Acronal® 7026 G

ingredients

Acronal® 7026 G is an emulsion polymer that has low viscosity and a small particle size. Films created by this product can maintain good flexibility under various temperature conditions, especially in cold climates. It has a strong carrying capacity and very good compatibility with pigments and fillers. It has excellent water, alkali, and weathering properties, and used for elastic wall paint formulated with a subtle crack bridging function. Because of the use of surface UV cross-linking technology, even in hot weather and polluted environments, this product shows strong stain resistance properties.

Acronal® 7035

ingredients

Acronal® 7035 is an APEO free anionic emulsion polymer with a low viscosity. It consists of small, finely divided particles. Acronal® 7035 has very high binding power for pigments and extenders therefore making it an excellent binder with superior scrub resistance even formulated at very high PVC paint.

Acronal® 7035 G

ingredients

Acronal® 7035 G is an APEO free anionic emulsion polymer with a low viscosity. It consists of small, finely divided particles. Acronal® 7035 G has very high binding power for pigments and extenders therefore making it an excellent binder with superior scrub resistance even formulated at very high PVC paint.

Acronal® 7037

ingredients

Acronal® 7037 is a non-APEO with low viscosity and is an anionic emulsion polymer. It consists of fine small emulsion particles. Acronal® 7037 has a high bond strength of pigments and fillers even if it is at a very high PVC. This product coatings have outstanding scrub resistance. It has applications in exterior latex paint and has good scrub resistance.

Acronal® 7051

ingredients

Acronal® 7051 is a finely divided polymer dispersion with a medium viscosity. It is a straight acrylic binder compatibility with the usual pigments and stones. It is also stable to high concentrations of calcium ions. It forms films that are tough, flexible and tack-free. Films formed by Acronal® 7051 have high water resistance and high lightfastness, and they are very resistant to saponification and weathering. They have very little tendency to blush, even if they are exposed to water for long periods.

Acronal® A 684

ingredients

Acronal A 684 is a straight acrylic binder with good wet adhesion on difficult substrates. It is a APEO-free, excellent resistance to dirt pick-up, very good wet adhesion, and a broad formulation latitude. Acronal A 684 has applications in architectural finishes, wood paints, wood stains, latex paints, and textured finishes.

Acronal® CN 18 ap

ingredients

Acronal® CN 18 ap is a formaldehyde free medium viscosity fine dispersion. The dispersion’s compatibility with extenders and pigment binding properties are excellent. The film is clear, glossy, flexible and exhibits exceptional resistance to water and saponification.

Acronal® DS 6266 ap

ingredients

Acronal® DS 6266 ap is an anionic emulsion polymer with a medium viscosity. It consists of small, finely divided particles, and forms a clear transparent, tack free film. This product is distinguished by high resistance to blushing, low water absorption and high weathering resistance. Acronal® DS 6266 ap is mainly used as a binder for exterior and flexible interior paints.

Acronal® ECO 338 AP

ingredients

Acronal® ECO 338 ap contains finely dispersed particles and has a low viscosity. It is odorless and contains no ammonia, solvents or plasticizers. It exhibits excellent compatibility with commonly used pigments and extenders. Films obtained from it are clear, flexible and glossy, and very resistant to water and hydrolysis. Acronal® ECO 338 ap is ideal for odorless paints. It is suitable for use in emulsion paints for interior or exterior.

Acronal® ECO 502 AP

ingredients

Acronal® ECO 502 ap contains finely dispersed particules and has a low viscosity. It is odorless and contains no ammonia, solvents or plasticizers. It exhibits excellent compatibility with commonly used pigments and extenders and doesn’t require coalescing agent in formulation. Films obtained from it are clear, flexible and glossy, and very resistant to water and hydrolysis.

Acronal® ECO 612 AP

ingredients

Acronal® ECO 612 ap is a full acrylic copolymer developed for flat to low sheen architectural paints. Paint formulated with Acronal® ECO 612 ap meets stringent performance requirements while keeping VOC content near zero. Due to its excellent adhesion and block resistance, paint containing Acronal® ECO 612 ap is suitable for a wide range of surface types and applications. In addition, Acronal® ECO 612 ap showed excellent resistance to most common household stains.

Acronal® ECO 702 AP

ingredients

Acronal® ECO 702 ap is an anionic emulsion polymer with a medium viscosity. It consists of small, finely divided particles. Its compatibility with pigments and extenders is excellent, and it has very high binding power for pigments. Unpigmented films of Acronal® ECO 702 ap are tack-free at room temperature. Films formed by Acronal® ECO 702 ap are clear, flexible and glossy, they have extremely high water resistance, and they are very resistant to saponification. Acronal® ECO 702 AP is a general purpose binder for low odor, stain resistant interior paints.

Acronal® ECO 7078

ingredients

Acronal® ECO 7078 contains finely dispersed particles and has a low viscosity. It is odorless and contains no ammonia, solvents or plasticizers. It exhibits excellent stains & scrub resistance in widely used interior paint formulations. It is suitable to formulate paint to comply new GB/T 9780 test method.

Acronal® ECO 9056 AP

ingredients

Acronal® ECO 9056 ap is an anionic emulsion polymer with a medium viscosity. It consists of small, finely divided particles. Its compatibility with pigments and extenders is excellent, and it has very high binding power for pigments. Unpigmented films of Acronal® ECO 9056 ap are tack-free at room temperature. Films formed by Acronal® ECO 9056 ap are clear, flexible and glossy, they have extremely high water resistance, and they are very resistant to saponification. Acronal® ECO 9056 AP is a general purpose binder, mainly used for applications in interior low odor stains resistance paints and plastic paints for interior applications.

Acronal® Flex SC 138 AP

ingredients

Acronal® FLEX SC 138 ap is a finely divided emulsion polymer with a low viscosity. Its compatibility with fillers and pigments is excellent, and it has a very high pigment binding power. Films formed by Acronal® FLEX SC 138 have excellent water and alkali resistance and weatherability. Elastic wall coatings formulated with this product provide hairline crackbridging and have a very good dirt pick-up resistance, even in warm and polluted environment. Acronal® FLEX SC 138 ap is used to manufacture elastic coatings such as elastic top and mid coats, renderings and wall putty. Acronal® FLEX SC 138 ap is suitable for premium elastic coatings in warm and polluted environment.

Acronal® GS 409 AP

ingredients

Acronal® GS 409 ap is a low viscosity, small particle diameter of the polymer emulsion. It has excellent compatibility with the fillers and pigments, but also has an extremely high pigment adhesive force. The Acronal® GS 409 ap formulated elastomeric coatings bridge hairline cracks can provide, even in a warm environment and pollution, but also has excellent stain resistance. Acronal® GS 409 ap for the preparation of flexible architectural coatings, such as resilient topcoat and painted, clean surface mortar and putty. The Acronal GS 409 ap suitable quality elastomeric coatings prepared all contaminated environment.

Acronal® IA734 ap

ingredients

Acronal® IA734 ap is a straight acrylic anionic emulsion polymer, which is specially designed for premium exterior applications. The fina particle size with narrow particle size distribution of the polymer ensures good adhesion. The cross linking gives best of the mechanical properties without compromising on dirt pick up resistance. It is free from plasticisers and solvents.

Acronal® JC 7043 X

ingredients

Acronal® JC 7043 X an anionic R-C emulsion with very fine particle size and low viscosity. It is a long chain acrylics and styrene copolymer that exhibits excellent penetration into chalky or powdery surface and excellent alkali resistance that is a suitable for water based penetrating and alkali primer as alternative technology for solvent based. The polymer also impacts very good adhesion to powdery masonry surfaces. Acronal® JC 7043 is suited to manufacture All-in one water based primer. Acronal® JC 7043 X is used mainly for water based penetrating and alkali primers.

Acronal® LR8977

ingredients

Acronal® LR8977 is a self-crosslinking acrylic emulsion for anti-corrosion coatings, and is also suitable for industrial coaitngs. It has good block resistance, high pigment load (PVC 35 %).APEO-free, and good anti-corrosion protection with anti corrosive pigments.

Acronal® NX 3587

ingredients

Acronal® NX 3587 is an aqueous acrylic dispersion for flexible roof coating. It is a newly developed polymer from BASF to address many concerns in the Flexible Roof Coating industry. First, it is a pure acrylic polymer which contains crosslinking functionalities which not only improve polymer tensile properties, but improve substrate adhesion properties especially on polyurethane.

Acronal® PA 510

ingredients

Acronal® PA 510 is a very fine, anionic dispersion of medium viscosity. This is a multiphase polymer with a special particle morphology, and this emulsion has extremely fine particles that provide excellent thickening response. Coatings or wood stain produced with Acronal® PA 510 are therefore highly blocking- resistant and at the same time flexible. Acronal® PA 510 has excellent wet adhesion on wood and to any critical substrate like aged alkyd resin paints. Acronal® PA 510 formulated high gloss coating provides high block resistant. Acronal® PA 510 has excellent wet adhesion on wood and to any critical substrate especially to aged alkyd.

Acronal® PA 619 ap

ingredients

Acronal® PA 619 ap is an aqueous acrylic dispersion for modification of hydraulic binders. It is recommended for use in mortar patching or spraying applications. Admixture compositions formulated with this product show excellent open time at high temperature with many types of cement, entraining low air, and it provides excellent freeze/thaw stability.

Acronal® PA 807 ap

ingredients

Acronal® PA 807 ap is an anionic dispersion of medium viscosity. It consists of fine, well divided particles. It is a full acrylic copolymer that exhibits excellent exterior durability and good pick-up resistance. The polymer also impacts paint film properties with good scrubability, blocking resistance, good adhesion to masonry surfaces and particularly good wet hiding. Acronal® PA 807 ap is suited to manufacture paints over a broad range of applications and can be formulated at different gloss levels. Acronal® PA 807 ap is used mainly for matt to gloss exterior finishes.

Acronal® PLUS 7045

ingredients

Acronal® PLUS 7045 is odorless anionic emulsion polymer with non-leaching anti-microbial properties. This product has specially polymerized carriers with immobilized silver ions that show excellent non-leaching antimicrobial properties without graying of the paint. The films obtained from it are clear, glossy and shows excellent resistance towards water and efflorescence.

Acronal® PLUS 7048

ingredients

Acronal® PLUS 7048 is an odorless anionic emulsion polymer offering formaldehyde abatement functionality in interior paints. It is functionalized with specialty monomers that help in capturing free formaldehyde from an indoor room. The films obtained from it are clear, glossy and shows excellent resistance towards water and efflorescence.

Acronal® PLUS 7048G

ingredients

Acronal® PLUS 7048G is a low odor, poly compound emulsion used for anti-formaldehyde interior coatings. This product uses a special functional monomer. It can help capture the free formaldehyde in the indoor air and the emulsion may be formed after drying. The transparent high-gloss coating has excellent water resistance and weathering properties.

Acronal® PRO80

ingredients

Acronal® PRO80 is an APEO- and zinc-free acrylic emulsion. It has excellent anti-corrosion protection and barrier to humidity. This product has good adhesion, good early rain resistance, and high pigmentability with anti-corrosive pigments. It is recommended for high build primer, mid-coat and topcoat metal coatings.

Acronal® PS 608 ap

ingredients

Acronal® PS 608 ap is an aqueous acrylic dispersion for modification of hydraulic binders. It is used to modify hydraulic binders especially mixtures containing cement. Compounds modified with this product have a very fluid consistency allowing the amount of water to be strongly reduced without changing the properties of the final product. A significant increase in the flexural strength is observed. Acronal®PS 608 ap is recommended for the manufacture of repair mortar, industrial floor screeds, finescreeds, as well as cementitious self-leveling compounds.

Acronal® PS 673 ap

ingredients

Acronal® PS 673 ap is an anionic emulsion polymer with a medium viscosity. It consists of small, finely divided particles. Its compatibility with pigments and extenders is excellent, and it has very high binding power for pigments. Films formed by Acronal® PS 673 ap are clear, flexible and glossy, they have extremely high water resistance, and they are very resistant to saponification. Unpigmented films of this product are tack-free at room temperature.

Acronal® PS 707 ap

ingredients

Acronal® PS 707 ap is an anionic emulsion polymer with a low viscosity. It consists of small, finely divided particles. It is very resistant to dissolved inorganic salts. The unpigmented film is clear, transparent, flexible, resistant to water and resistant to saponification. This product is suited to the manufacture of primer and sealer over a broad range of formulations.

Acronal® PS 713 ap

ingredients

Acronal® PS 713 ap is an aqueous acrylic dispersion for high quality mastic applications. It is a highly versatile aqueous acrylic dispersion that is suitable for different waterproofing applications and has high adhesion characteristics on various surfaces. It is a robust product, which provides a high pigment binding powder and has a very good stability under high shear mixing force. It can be added to mill base to formulate very high solids coatings to prepare thick films. Acronal® PS 713 ap is widely used in the construction industry, especially for mastic waterproofing.

Acronal® PS 715 ap

ingredients

Acronal® PS 715 ap is an aqueous acrylic dispersion for mastic and anti-carbonation coating. It is the appropriate binder to be used for high performance mastic waterproofing membranes. Due to its elastomeric and excellent crack-bridging properties, it imparts a long-term durability to the building. Mastic waterproofing membranes based on this product have good adhesion on various substrates and a very good dirt pick-up resistance. It is ideal for exterior wall waterproofing applications to protect buildings from water leakage as well as from weather effects.

Acronal® PS 719 AP

ingredients

Acronal® PS 719 ap is an anionic emulsion polymer with a medium viscosity. It consists of small, finely divided particles. Its compatibility with pigments and extenders is excellent, and it has very high binding power for pigments. Unpigmentedfilms of Acronal®PS 719 ap are tack-free at room temperature. Films formed by Acronal®PS 719 ap are clear, flexible and glossy, they have extremely high water resistance, and they arevery resistant to saponification. This product is a general purpose binder, mainly used for primers and sealers for mineral substrates.

Acronal® PS 791 AP

ingredients

Acronal® PS 791 ap is an anionic emulsion polymer with a low viscosity, consisting of small, finely divided particles. It has excellent compatibility with pigments and extenders, and very high binding power for pigments. Unpigmented films of Acronal® PS 791 ap are tack-free at room temperature. Films formed by Acronal® PS 791 ap are clear, flexible and glossy, they have extremely high water resistance, and they are very resistant to saponification. This product is a general purpose binder, mainly used for the following applications: exterior paints; interior paints, plastic paints for interior application; textured finishes; primers for mineral substrates; and modifying silicate paints and finishes.

Acronal® S 400 F ap

ingredients

Acronal® S 400 F ap is an aqueous acrylic dispersion for flexible waterproofing membrane. Cementitious waterproofing membranes play an important role in durable, high quality construction projects. It is an aqueous acrylic dispersion that provides cementitious waterproofing membranes with outstanding water resistance and excellent crack-bridging properties. It does not contain Ammonia or Formaldehyde, improving your workplace health and safety.

Acronal® S 727

ingredients

Acronal® S 727 is a hydrophobic copolymer binder, which contains an active compound to block and lock tannins and nicotine. It creates a tack-free, elastic, and durable film. It offers water resistance and outstanding tannin blocking properties for tropical woods and knot stains. It has no additional zinc oxide or alternative active compounds needed in formulations. This product is applied in tannin and nicotine blocking primers, decorative and industrial applications, and it is universally applicable for transparent and especially pigmented systems.

Acronal® Xpress 7512 ap

ingredients

Acronal® Xpress 7512 ap is an aqueous acrylic dispersion for the formulation of ultra fast-curing mastic waterproofing membranes. It is “THE industry benchmark” in fast curing technology for 1K mastic waterproofing membranes. It was specifically designed to allow for fast re-coats under highly humid climate conditions. BASF’s latest polymer for waterproofing makes use of multiple innovative surface features and a unique composition of ingredients, resulting in low water absorption, excellent blistering resistance, and a high pigment binder capability.

Dispex® AA 4140

ingredients

Dispex® AA 4140 is a derivative of a family of highly effective, low viscosity dispersing agents for water-based coating systems, especially suitable for the dispersion of inorganic pigments. It is based on an organic polymer and provides improved storage stability of both pigment dispersion and formulated paint when compared with inorganic dispersing agents such as polyphosphate products. There is little or no adverse reaction to high temperatures or pH changes.

Dispex® CX 4240

ingredients

Dispex® CX 4240 is a derivative of a family of highly effective, low viscosity dispersing agents for water-based coating systems, especially suitable for the dispersion of inorganic pigments. Compared with other dispersing agents, this product allows formulations of high-gloss/low-pigment-volume-concentration coatings in addition to standard matt formulations.

Dispex® CX 4320

ingredients

Dispex® CX 4320 is a particularly effective, yellowish liquid dispersing agent for dispersing inorganic fillers and pigments. It improves wet scrub and blocking resistance. It is a polymeric dispersing agent for inorganic fillers and pigments. It is anionic and is supplied in the form of a sodium salt. It is particularly effective for dispersing inorganic fillers and pigments in high gloss, semi-gloss, and highly filled interior paints.

Dispex® Ultra FA 4404

ingredients

Dispex® Ultra FA 4404 is a partially neutralized chelating agent suitable for use in the manufacture of pigment suspensions, emulsion paints, and slurries. This prodduct combines the properties of a chelating agent and polyphosphate with those of an organic dispersant thus yielding highly concentrated, stable, and low-viscosity inorganic pigment suspensions.

Dispex® Ultra FA 4437

ingredients

Dispex® Ultra FA 4437 is a yellowish, slightly cloudy, fluid to waxy silicone-free surface active flow additive and color acceptance improver for aqueous systems based on emulsions and aqueous resins. Due to its good wetting properties, this product ensures better wetting of difficult-to-wet substrates. The emulsifying effect of this product also prevents surface defects such as craters, fisheyes, pinholes, and streaks caused by incompatible components. Furthermore, Dispex® Ultra FA 4437 has a strong affinity to pigment surfaces thereby reducing color acceptance problems.

Dispex® Ultra FA 4480

ingredients

Dispex® Ultra FA 4480 is viscous liquid wetting and dispersing agent with excellent pigment wetting properties for coatings and aqueous pigment pastes. It provides outstanding flow properties even at high pigment load. In top-coats based on different binder types, Dispex® Ultra FA 4480 improves pigment wetting and therefore increases gloss and color intensity of the paint, especially in combination with organic pigments. It shows excellent results in waterbased alkyds, polyester resins as also in aqueous polyurethane emulsions.

Dispex® Ultra FA 4483

ingredients

Dispex® Ultra FA 4483 is a clear viscous liquid, dispersing agent for inorganic pigments and stabilizing surfactant for latex production. It is recommended for inorganic pigment concentrates and slurries. In combination with non-ionic dispersing agents, this product is used for universal pigment pastes and is also suitable for solvent-based coatings. To achieve the best results, Dispex® Ultra FA 4483 should be added to the mill base and ground using effective dispersing equipment.

Dispex® Ultra PA 4550

ingredients

Dispex® Ultra PA 4550 is a clear, slightly yellowish liquid high-molecular-weight dispersing agent. This product stabilizes the pigment dispersion of inorganic and organic pigments and improves gloss, color strength, flocculation stability, and anti-flooding behavior. Dispex® Ultra PA 4550 is pH-independent and has a broad compatibility in most commonly used water-based coatings. It is completely water-soluble and does not need to be neutralized.

Dispex® Ultra PA 4560

ingredients

Dispex® Ultra PA 4560 is a clear, slightly yellowish liquid, modified polyacrylate, high-molecular weight dispersing agent. It stabilizes the pigment dispersion of inorganic and organic pigments and improves gloss, color strength, flocculation stability, and anti-flooding behavior. Dispex® Ultra PA 4560 is suitable to formulate VOC-free tinting concentrates for both water- and solvent-based decorative paints. These concentrates have excellent compatibility and can therefore be incorporated by the use of low shear forces.

Dispex® Ultra PX 4585

ingredients

Dispex® Ultra PX 4585 is a water-based dispersant of the acrylic block copolymer family of products made by Controlled Free Radical Polymerization (CFRP). This technology allows formulating polymeric dispersants with defined polymer architecture and a low poly-dispersity index. It is especially suited for the dispersion of pigments in water-based coatings. This product offers high efficiency in stabilizing pigments and demonstrates wide compatibility with many water-based resin systems. This makes Dispex® Ultra PX 4585 ideally suited for the use of the concept of resin-free pigment concentrates (RFPC).

Efka® FA 4644

ingredients

Efka® FA 4644 is a transparent, yellowish liquid, low-molecular-weight dispersing agent with the chemical nature of unsaturated polyamide and acid ester salts. It is an additive for pigment dispersion. It reduces the interfacial tension between pigments or extenders on one side and the vehicle on the other side. This effect reduces dispersing time, stabilizes the pigment dispersion, reduces pigment sedimentation, increases gloss, and improves flow.

Efka® FA 4654

ingredients

Efka® FA 4654 is a transparent, slightly brownish liquid low-molecular-weight dispersing agent. This product helps to prevent interfacial tension between hydrophilic pigments/extenders and binder, forming a lattice structure with the pigments at the same time. Efka® FA 4654 is ideal for dispersing organophilic bentonites because it reduces dispersion time, improves storage properties of the final paste and gives a thixotropic, easy-to-process paste.

Efka® FL 3670

ingredients

Efka® FL 3670 is a clear, colorless liquid fluorocarbon-modified polyacrylate. This product, being well compatible with most solvent-based resins, is a leveling agent, a very effective anti-cratering agent, as well as a flow control agent with minimized effect on stabilizing foam. Due to its broad compatibility, Efka® FL 3670 can be used in most solvent-based liquid coating systems to improve the leveling of the dry film with no negative impact on recoatability. It is designed to be used in acrylic or polyester/melamine automotive OEM coatings and UV-curable wood coatings. It is also used in two-pack PUR automotive refinish coatings, polyester/melamine coil coatings, and two-pack epoxy and PUR compounds.

Efka® FL 3740

ingredients

Efka® FL 3740 is a leveling agent with air release properties for non-aqueous, liquid coating systems, as well as for powder coatings and binders for powder coatings. Due to its chemical structure, this product modifies the surface tension of the coatings. It eliminates or reduces cratering, fish-eyes, and orange peel. It also improves the flow, dispersion and floating behavior, prevents air entrapment and optimizes wetting of the substrate.

Efka® FL 3770

ingredients

Efka® FL 3770 is a clear, colorless liquid fluorocarbon-modified polyacrylate. This product, being well compatible with most solvent-based resins, is a leveling agent, a very effective anti-cratering agent, as well as a flow control agent without stabilizing foam. Due to its broad compatibility, Efka® FL 3770 can be used in most solvent-based liquid coating systems to improve the leveling of the dry film with no negative impact on recoatability.

Efka® PA 4400

ingredients

Efka® PA 4400 is clear, slightly yellowish liquid high-molecular-weight dispersing agent for stabilizing inorganic and organic pigments. This results in reduced flooding problems, higher color strength, and improved gloss and DOI. This product is an acrylic polymer with significant higher molecular weight compared with the Efka® polyurethane-based polymeric dispersants. This gives better deflocculation of organic pigments. Efka® PA 4400 is mainly used in automotive OEM and refinish topcoats.

Efka® PA 4401

ingredients

Efka® PA 4401 is a clear, slightly yellowish liquid modified polyacrylate. It is a polymeric dispersant for stabilizing inorganic and organic pigments that reduces flooding problems, has high color strength, and improves gloss and DOI. This product is broadly compatible from low- to high-polarity systems, including nitrocellulose. Efka® PA 4401 is used for all kinds of high-quality solvent-based industrial coatings including automotive topcoats as well as pigment concentrates.

Efka® PB 2001

ingredients

Efka® PB 2001 is a clear, colorless to slightly yellow liquid solution of vinyl polymer in organic solvents. It is a silicone-free defoamer for non-aqueous coatings, printing inks, and especially for highly viscous coatings based on 2-pack epoxy, unsaturated polyester, and PUR systems.

Efka® PB 2010

ingredients

Efka® PB 2010 is a silicone-free defoamer with good compatibility, intended to accelerate defoaming as well as to improve clarity in solvent-based coatings. This product eliminates foaming and blistering regardless of whether the air bubbles are a result of the substrate or due to the application method such as pumping, rolling, flooding or spraying. Efka® PB 2010 performs well for a wide range of applications and is particularly suitable for clear coatings, without haziness, as well as providing high gloss if required.

Efka® PB 2018

ingredients

Efka® PB 2018 is a clear, slightly yellowish liquid solution of defoaming substances. It can be used as a silicone-free defoamer for various coating systems. It functions well during the application of paints and lacquers, and also prevents the entrapment of air during processing steps such as stirring and pumping. Efka® PB 2018 is especially suited for solvent-based wood finishes if foam formation is a problem when applied by spraying or curtain coating. It has very good compatibility properties which makes it extremely suitable for use in clear coatings.

Efka® PB 2020

ingredients

Efka® PB 2020 is a clear, slightly yellowish liquid, silicone-free solution of defoaming substances. This product accelerates defoaming in solvent-based coatings. It therefore eliminates foaming and blistering, regardless of whether the air bubbles are caused by the substrate, e.g., wood or paper or as a result of pumping, rolling, flooding or airless spraying. Efka® PB 2020 is particularly suitable nitrocellulose lacquers and acid-curable wood finishes, especially those applied by curtain coating. It is also suitable for cold-cured epoxy resin systems and two-pack polyurethane lacquers which are applied by spraying or brushing.

Efka® PB 2021

ingredients

Efka® PB 2021 is a clear, slightly yellowish liquid solution of defoaming substances. It can be used as a silicone-free defoamer for various coating systems. It functions well during the application of paints and lacquers and also prevents the entrapment of air during processing steps such as stirring and pumping. In addition, Efka® PB 2021 helps to prevent surface irregularities to give the smoothest possible surface.

Efka® PB 2720

ingredients

Efka® PB 2720 is a silicone free, colorless, clear to slightly hazy liquid solution of defoaming substances. It supports the quick de-aeration of thermosetting resin systems so that foam and blister-free self leveling compounds and laminates can be processed. Efka® PB 2720 can be used in pigmented or non-pigmented resin systems such as unsaturated polyesters (SMC/BMC gelcoats and synthetic mortars), two-pack epoxies, and PVC-compounds If used in conjunction with Efka® FA 4644 in pigmented compounds, a lower viscosity results thereby aiding the air release properties.

Efka® PU 4010

ingredients

Efka® PU 4010 is a clear, slightly yellowish liquid modified polyurethane. It is a polymeric dispersant for stabilizing inorganic pigments including carbon blacks. It also has an excellent performance in many organic pigments that results in higher color strength, reduced grinding time, improved gloss, and prevention of flooding and floating problems. Due to its particularly good combination of price and performance, Efka® PU 4010 is a very attractive substitute for conventional wetting and dispersing agents.

Efka® PU 4046

ingredients

Efka® PU 4046 is a clear, slightly yellowish liquid, modified polyurethane high-molecular-weight dispersing agent. It is a polymeric dispersant for stabilizing inorganic and organic pigments that results in improved gloss, reduced flooding problems, higher color strength, and lower viscosity. Efka® PU 4046 is used for all kinds of solvent-based coatings as well as pigment concentrates.

Efka® PU 4047

ingredients

Efka® PU 4047 is a clear, slightly yellowish liquid, modified polyurethane, high-molecular-weight dispersing agent. It is a polymeric dispersant for stabilizing inorganic and organic pigments that results in reduced flooding problems, higher color strength, lower viscosity, and improved gloss and DOI. Efka® PU 4047 is used in high-quality industrial coatings such as automotive topcoats (OEM and refinish), coil coatings and 2-pack polyurethane coating systems as well as pigment concentrates.

Efka® PU 4050

ingredients

Efka® PU 4050 is a clear, slightly yellowish liquid, modified polyurethane, high-molecular-weight dispersing agent. It is a polymeric dispersant for stabilizing inorganic and organic pigments that results in reduced flooding problems, higher color strength, lower viscosity, and improved gloss and DOI. Efka® PU 4050 is used in all kinds of solvent-based coatings, including high-quality industrial coatings such as automotive topcoats (OEM and refinish), coil coatings and 2-pack polyurethane coating systems. It can also be used in pigment concentrates.

Efka® PU 4061

ingredients

Efka® PU 4061 is clear to slightly hazy yellowish liquid, modified polyurethane, high-molecular-weight dispersing agent. It is a polymeric dispersant for stabilizing inorganic and organic pigments that results in reduced flooding problems, higher color strength, lower viscosity, and improved gloss and DOI. Efka® PU 4061 is used in all types of solvent-based coatings, particularly high-quality industrial coatings such as automotive topcoats (OEM and refinish), coil coatings and 2-pack polyurethane coating systems. It is also suitable for use in pigment concentrates.

Efka® PU 4063

ingredients

Efka® PU 4063 is yellowish liquid modified polyurethane. It is used as a polymeric wetting and dispersing agent for the deflocculation of inorganic and organic pigments in high-quality solvent-based pigment pastes. Efka® PU 4063 reduces the dispersing time and the mill base viscosity and thus facilitates the formulation of highly concentrated pigment pastes. After the pigment paste has been blended into paint, it prevents flooding and floating of pigments and promotes excellent gloss and high color intensity.

Efka® PX 4310

ingredients

Efka® PX 4310 is made by the Controlled Free Radical Polymerization (CFRP) technology, which allows producing polymeric dispersants with defined polymer architecture and a low poly-dispersity index. It is suitable for industrial and automotive coatings, and it offers high efficiency in stabilizing pigments and demonstrates a wide compatibility with many solvent-based resin systems.

Efka® PX 4330

ingredients

Efka® PX 4330 is made by the Controlled Free Radical Polymerization (CFRP) technology, which allows producing polymeric dispersants with defined polymer architecture and a low poly-dispersity index.It is suitable for stabilizing pigments in solvent-based coatings. Aside from its broad compatibility in solvent-based coatings, it offers high color strength, strong viscosity-depressing effects, as well as good stability against flooding, floating and flocculation.

Efka® SI 2022

ingredients

Efka® SI 2022 is a clear, colorless liquid solution of defoaming substances containing silicone. It is a silicone-based defoamer for both solvent-based and solvent-free coatings. Efka® SI 2022 prevents the formation of foam and blisters during the manufacturing and application of solvent-based and solvent-free coatings. It is recommended for two-pack systems based on polyurethane and epoxy resins; especially suited for polyurethane based curtain coating finishes. It is also used in baking enamels based on alkyd resins or saturated polyesters and air-drying industrial coatings based on medium-oil alkyd resins.

Efka® SI 2722

ingredients

Efka® SI 2722 is a colorless, clear to slightly hazy liquid solution of defoaming substances containing silicone. It produces rapid de-aeration of solvent-free epoxy and polyurethane compounds so that foam- and blister-free self-leveling coatings can be produced. This product acts as a leveling agent, giving a smooth surface to the coating. Efka® SI 2722 can also be used in pigmented or non-pigmented resin systems such as? solvent-free epoxy systems? solvent-free polyurethane systems.

Efka® SI 2723

ingredients

Efka® SI 2723 is a colorless, slightly hazy liquid solution of defoaming substances containing silicone. This product was developed to produce rapid de-aeration of solvent free polyurethane and epoxy compounds used in flooring applications so that foam- and blister-free self-leveling coatings can be produced. Efka® SI 2723 acts as a leveling agent, giving a smooth surface to the coating. On the other hand, it presents the advantage of low odor.

Efka® SL 3030

ingredients

Efka® SL 3030 is a clear, colorless liquid, organically modified polysiloxane used as a slip and leveling agent. Compared to dimethylpolysiloxane, this product is universally compatible with various coating systems and does not cause cratering even in excessively high concentrations. It improves leveling as well as increases scratch and abrasion resistance. It also prevents floating, improves anti-blocking characteristics, and acts as a defoamer and de-aeration aid. Efka® SL 3030 is used in water- and solvent-based industrial coatings, particularly for spray application.

Efka® SL 3200

ingredients

Efka® SL 3200 is a clear to slightly cloudy liquid copolysiloxane . It is a solventless polysiloxane block polymer corresponding in performance to other flow or slip agents of the Perenol® S range. This product is used as and additive for improving the flow and the slip of solvent-based and solventless coatings.

Efka® SL 3236

ingredients

Efka® SL 3236 is an organically modified polysiloxane, soluble in aliphatic and aromatic hydrocarbons, esters and ketones, insoluble in water. It improves the general surface characteristics and in particular the following advantages are gained. Efka® SL 3236 is particularly recommended for non-aqueous coatings such as baking enamels based on alkyd, acrylic or polyester resins. It is also is used for acid-curable or polyurethane wood finishes particularly when applied by curtain coating, self-leveling epoxy flooring compounds, and UV-curable paper lacquers? air-drying alkyd systems.

Efka® SL 3258

ingredients

Efka® SL 3258 is a clear to hazy liquid, solvent-free 100% active polyether modified polysiloxane. It is a non-reactive slip modifier, leveling and substrate wetting agent for printing inks, paints and coatings. It is suitable for UV, but also for solvent- and water-borne applications. Due to its chemical nature Efka® SL 3258 exhibits an excellent reduction of surface tension of UV-systems, which leads to an improvement in gloss. Additionally it improves the surface slip and therefore strongly reduces the COF (coefficient of friction).

Efka® SL 3288

ingredients

Efka® SL 3288 is a very effective additive, which increases slip, surface smoothness and ‘soft-touch’ effect. Due to its excellent compatibility properties, it is very suitable for use in high-gloss clear coatings without causing haze. It improves leveling and surface smoothness, increases scratch and abrasion resistance, and improves the orientation of metallic pigments and matting agents. This product also prevents floating and flooding, prevents cratering, enhances anti-blocking characteristics, and has minimal effect on intercoat adhesion and foam stabilization.

Efka® SL 3299

ingredients

Efka® SL 3299 is a very effective additive, which increases slip, surface smoothness, and gloss. Due to its excellent compatibility properties, it is very suitable for use in high-gloss clear wood coatings. This product improves the orientation of matting agents in matted wood finishes and improves leveling and surface smoothness and gloss. It also increases scratch and abrasion resistance, prevents floating, enhances anti-blocking characteristics, and prevents cratering.

Firemist® Colormotion Blue Topaz 9G680D

ingredients

Firemist® Colormotion Blue Topaz 9G680D is a free flowing, dry powder with blue highlights and a brilliant blue to violet reflection color. Firemist® Colormotion patented borosilicate-based pigments create more chroma, transparency and reflectivity than many traditional pearlescent pigments. These pigments generate distinctive viewing angle dependent color travel effects. Firemist® Colormotion Blue Topaz 9G680D is used in coloration of plastics, powder, general industrial, architectural/deco, printing ink, and specialty applications.

Firemist® Colormotion Ruby 9G480D

ingredients

Firemist® Colormotion Ruby 9G480D is a free flowing, dry powder with blue highlights and a brilliant red to blue reflection color. Firemist® Colormotion patented borosilicate-based pigments create more chroma, transparency and reflectivity than many traditional pearlescent pigments. These pigments generate distinctive viewing angle dependent color travel effects. Firemist® Colormotion Ruby 9G480D is used in automotive, coil, general industrial, architectural/deco, printing ink, and specialty applications.

Firemist® Velvet Pearl 9P130I

ingredients

Firemist® Velvet Pearl EH 921 is an effect pigment for decorative applications. Applied in decorative paints, it provides the unique character of patinated surfaces. In combination with transparent absorption pigments it can be used in all shade areas for subtle sparkling, matte finishes to generate visual texture. Especially in interior design, the soft and cozy effect of Firemist® Velvet pigments are of high value for coatings for walls, wall paper, concrete or wood.

Foamaster® MO 2111 NC

ingredients

Foamaster® MO 2111 NC is a turbid yellow liquid blend of white oils and modified fatty acid derivatives. It is an effective defoamer for dispersion paints, latex adhesive systems, and water-based printing inks.

Foamaster® MO 2150

ingredients

Foamaster® MO 2150 is a yellowish liquid blend of hydrophobic components and paraffinic hydrocarbons. It is an excellent defoamer for mat aqueous coatings with exceptional product stability and excellent price/performance ratio. It also has quick foam suppression during the polymerization process, retains its antifoaming properties during paint storage, and is active under extreme temperature and pH conditions. Foamaster® MO 2150 is used for synthetic latex, water-based architectural coatings, plasters based on organosilicate, and aqueous adhesives.

Foamaster® MO NDW

ingredients

Foamaster® MO NDW is a turbid amber liquid defoamer for latex systems. It is a formulation based on hydrocarbons and non ionic surfactants that continues to defoam effectively, even after months of storage. It contributes to excellent brushability and does not cause fish-eyes and has no effect on the final paint film. Foamaster® MO NDW is effective in all systems based on synthetic latex, especially those based on styrene-butadiene, polyvinyl acetate, acrylic and water-soluble alkyds.

Foamaster® MO NXZ

ingredients

Foamaster® MO NXZ is a turbid amber liquid defoamer for emulsion paints and adhesive systems. It is a formulation based on hydrocarbons and non-ionic surfactants. Foamaster® MO NXZ is a defoamer for emulsion paints based on styrene-butadiene, acrylic, polyvinyl chloride and its copolymers, ethylene-vinyl acetate, vinylidene chloride and water-soluble alkyds.

FoamStar® ED 2522

ingredients

FoamStar® ED 2522 is a white liquid, high performance, ultra-low SVOC silicone emulsion defoamer for premium water based paints, clear coats and inks. It is a universal, VOC-free, and ultra-low SVOC, silicone emulsion defoamer specifically designed for premium waterbased architectural paints, industrial coatings, wood coatings, printing inks, and over print varnisches (OPVs).

FoamStar® SI 2213

ingredients

FoamStar® SI 2213 is a white liquid mixture of foam-destroying polymers, emulsifiers, and silicone. It acts as a defoamer for clear and lowly pigmented aqueous coatings and printing inks, predominantly those based on polymeric dispersions. It is a highly effective defoamer with excellent compatibility which makes it ideally suitable for use in modern coatings such as those based on finely dispersed acrylics. For printing inks based on these polymers, FoamStar® SI 2213 has little to no effect on the swelling of rubber stereos, inking rollers or blankets.

FoamStar® SI 2250

ingredients

FoamStar® SI 2250 is a opalescent liquid modified polydimethyl siloxane. This product can be used as a defoamer in various water-based coating systems and pigment concentrates. Due to its stability to highshear processing it functions well during the application of paints and lacquers and also prevents the entrapment of air during processing steps such as stirring or pumping.

FoamStar® SI 2292

ingredients

FoamStar® SI 2292 is a colorless to slightly yellow liquid solution of a specially modified polydimethyl siloxane. This product is used as a defoamer and de-aerating agent for purely aqueous coatings and coatings containing co-solvents based on polymer emulsions applied by curtain coating, spraying, dipping, rolling, or brushing. Its long-term defoaming effect makes it suitable for emulsion and suspension polymerization, particularly in the manufacture of PVC, vinyl acetate and acrylic emulsions. FoamStar® SI 2292 may be used during polymerization and monomer stripping.

FoamStar® SI 2293

ingredients

FoamStar® SI 2293 is a defoamer and de-aerating agent for use in aqueous architectural paints and industrial coatings based on polymer emulsions which are applied by curtain coating, spraying, dipping, rolling or brushing on substrates such as wood, wood products or metal. Further to its long-term defoaming efficiency, FoamStar® SI 2293 has proved to be compatible with high-quality emulsion paints. It is also suitable as a defoamer in emulsion and suspension polymerization, particularly in the manufacture of polyvinyl chloride, vinyl acetate and acrylic emulsions.

Genamid® 250

ingredients

Genamid® 250 is a low viscosity, amidoamine resin designed for reaction with liquid or solid epoxy resins in epoxy coating systems. It offers good compatibility with a wide range of epoxy products and is most commonly used with Bisphenol A-based epoxy resins that have an epoxide equivalent weight of approximately 190. It is lower in viscosity than Genamid® 2000 although it is generally slower in cure time.

Genamid® 747

ingredients

Genamid® 747 is a very low viscosity, amidoamine resin designed for reaction with liquid or solid epoxy resins in epoxy coating systems. It offers immediate compatibility with a wide range of epoxy products and forms tough, chemically resistant industrial coatings. It is ideally suited for high solids formulations with low viscosity epoxy resins. Genamid® 747 and epoxy resin systems are recommended for applications such as: adhesives, electrical encapsulations, laminates and industrial coatings.

FOR MATERIAL SUPPLIERS

Put your materials in front of formulators.

Give product developers the specs, certifications, and sample path they need to shortlist your grades.

Talk to our team
Formulation scientist ready to help suppliers reach product developers