Home / Paint & Coatings / Suppliers / Arkema Rheology & Specialty Additives

Paint & Coatings

Arkema Rheology & Specialty Additives

Arkema Rheology & Specialty Additives lists 237 grades in Paint & Coatings. The sheets saved on this site are below.

Listed grades237
Sheets here202
Formulas here29
PAINT & COATINGS SUPPLIER Arkema Rheology & Specialty Additives

Grades from Arkema Rheology & Specialty Additives

Matt Paint 1 (Formulation #SPF_CTG_021_2203)

formulations

This matt paint features Ecodis™ P 50.

Matt Paint 2 (Formulation #SPF_CTG_022_2203)

formulations

This matt paint features Ecodis™ P 50.

Matt Paint 3 (Formulation #SPF_CTG_023_2203)

formulations

This matt paint features Ecodis™ P 50.

OEM Topcoat with Metallic Flake Pigments (Formulation #SPF_CTG_033_2203)

formulations

This OEM topcoat formulation features Coadis™ 790.

Pigment Concentrates for Water Borne Systems - Bayferrox 130F PR 101 (Formulation #SPF_CTG_024_2203_EN)

formulations

This pigment concentrates for water-borne systems features Coadis™ 790.

Pigment Concentrates for Water Borne Systems - Hansa Brillant Yellow 2GX70 PY 74 (Formulation #SPF_CTG_025_2203_EN)

formulations

This pigment concentrates for water-borne systems features Coadis™ 790.

Pigment Concentrates for Water-Borne Systems - Bayferrox (Formulation #130F PR 101)

formulations

This pigment concentrates for water-borne systems features Coadis™ 790.

Pigment Concentrates for Water-Borne Systems - Heliogen Green L8730 PG 7 (Formulation #SPF_CTG_030_2203)

formulations

This pigment concentrates for water-borne systems features Coadis™ 790.

Pigment Concentrates for Water-Borne Systems - Hostaperm Violet RL Special PV 23 (Formulation #SPF_CTG_028_2203)

formulations

This pigment concentrates for water-borne systems features Coadis™ 790.

Pigment Concentrates for Water-Borne Systems - Irgazin Red L3660HD PR 254 (Formulation #SPF_CTG_027_2203)

formulations

This pigment concentrates for water-borne systems features Coadis™ 790.

Pigment Concentrates for Water-Borne Systems - Pigment concentrates for WB systems - Heliogen Blue L6975F PB 15:2 (Formulation #SPF_CTG_029_2203)

formulations

This pigment concentrates for water-borne systems features Coadis™ 790.

Pigment Concentrates for Water-Borne Systems - Raven 5000 PBk 7 (Formulation #SPF_CTG_031_2203)

formulations

This pigment concentrates for water-borne systems features Coadis™ 790.

Satin Paint 1 (Formulation #SPF_CTG_019_2203)

formulations

This satin paint features Coapur™ 2025.

Satin Paint 2 (Formulation #SPF_CTG_020_2203)

formulations

This satin paint features Coapur™ 2025.

Satin Paint Formulation (Formulation #SPF_CTG_010_2201)

formulations

This satin paint formulation features Coapur™ 2025.

Silver Paint with Mica Pigments for General OEM Applications (Formulation #SPF_CTG_034_2203)

formulations

This solvent-based formulation features Crayvallac® LA-150.

Solvent-Based Decorative Paint Formulation (Formulation #SPF_CTG_036_2112)

formulations

This solvent-based decorative paint formulation features Crayvallac® D-801 and Crayvallac® LA-250.

Solvent-Based General Industry Formulation (Formulation #SPF_CTG_035_2112)

formulations

This solvent-based formulation features Crayvallac® LA-150.

Stain Blocking Paint (Formulation #SPF_CTG_016_2203)

formulations

This stain blocking paint features Coadis™ 790.

Topcoat for OEM Spray Application on Rigid PVC (Formulation #SPF_CTG_032_2203)

formulations

This topcoat formulation features Coadis™ 790 and Coapur™ XS 71.

Water Thinnable Alkyd DTM Anticorrosion Paint (Formulation #SPF_CTG_015_2203)

formulations

This anticorrosion paint features Coadis™ 790 & Coapur™ XS 83.

Waterbased 2K Pigmented Glossy Topcoat (Formulation #SPF_CTG_018_2203)

formulations

This waterbased top coat features Coapur™ 2025 and Coadis™ 790.

Waterbased Pigmented Acrylic Primer (Formulation #SPF_CTG_003_2203)

formulations

This waterbased pigmented acrylic primer features Coadis™ 790.

Waterbased UV-Curable Satin Topcoat (Formulation #SPF_CTG_017_2203)

formulations

This waterbased top coat features Coapur™ 2025 and Coadis™ 790.

Waterborne Anticorrosion Alkyd PU Emulsion Paint (Formulation #SPF_CTG_014_2203)

formulations

This waterborne anticorrosion alkyd PU emulsion paint features Coadis™ 790 and Coapure™ 830 W.

Wood Paint Formulation (Formulation #SPF_CTG_037_2112)

formulations

This wood paint formulation features CRAYVALLAC® LA-350, Coapur™ 830 W, and Coadis™ 790.

1K Acrylic White Topcoat Industrial Coatings (Formulation #SPF_CTG_001_2203)

formulations

This acrylic white topcoat features Coadis™ 790 and Coapur™ XS 83.

2K Industrial White Paint for Steel (Formulation #SPF_CTG_004_2203)

formulations

This industrial white steel paint features Coadis™ 790 & Coapur™ XS 71.

2K PU Waterborne Paint (Formulation #SPF_CTG_002_2203)

formulations

This waterborne paint features Coadis™ 790 & Coapur™ XS 71.

BR 100 P

ingredients

BR 100 P is a gloss emulsion paints require the use of thickening agents which give various properties such as water retention and rheological properties (film build, Brush-ability and levelling of the film). Usual thickeners in emulsion paints provide poor rheological properties, giving a bad film build and levelling or a poor compatibility with the various paint components, and a decrease of the gloss level due to the formation of a haze after drying. BR 100 P has been especially designed to solve these problems. It is suitable for the thickening of anionic and non-ionic emulsions and particularly with styrene-acrylics, vinyl-acrylics and other copolymers. Beside gloss emulsion paints, the main applications for BR 100 P are in semi-gloss, interior and exterior flat emulsion paints, in anti-corrosive paints, in adhesives.

BR 125 NPF

ingredients

BR 125 NPF is a polyurethane associative rheology modifier which gives formulations a unique Newtonian rheological profile characterised by a low viscosity at low shear rate and a high viscosity at high shear rate.The main applications for BR 125 NPF are gloss emulsion paints, semi-gloss, flat dispersion paints. Formulation of anticorrosive paints or adhesives can also be based on BR 125 NPF.

CELOCOR® AF

ingredients

CELOCOR® AF is an ammonia-free, voided latex particle that imparts hiding and acts as a partial replacement for titanium dioxide.

CHEMPOL® 801-0066

ingredients

CHEMPOL® 801-0066 is a solvent-free, soya-based long oil alkyd resin designed for use as an adhesion modifier for exterior acrylic paints and as a solids and viscosity modifier for high solids alkyd paints.

CHEMPOL® 801-2164

ingredients

CHEMPOL® 801-2164 is a solvent-free linseed oil alkyd designed for use as an adhesion modifier for exterior acrylic paints and as a solids and viscosity modifier for high solids alkyd paints.

CHEMPOL® 801-6005

ingredients

CHEMPOL® 801-6005 is a flexible long oil alkyd developed for exterior paint and varnish systems requiring maximum extensibility and resistance to age embrittlement when applied to wood.

CHEMPOL® 801-6050

ingredients

CHEMPOL® 801-6050 is a flexible linoleic long oil alkyd for air-dry systems.

CHEMPOL® 801-7961

ingredients

CHEMPOL® 801-7961 is a high solids long oil alkyd for exterior porch and deck stains.

CHEMPOL® 900-0067

ingredients

CHEMPOL® 900-0067 is a UV stabilizer solution used to improve exterior coating performance. Improves yellowing resistance and gloss retention especially for Styrene/Acrylic concrete and auto refinish coatings. Use @ 1-2% on solids.

Coadis™ 123 K

ingredients

Coadis™ 123 K is a synthetic, versatile dispersant which provides easy fillers and pigments dispersion, good storage stability and improved water resistance to water-borne systems.

Coadis™ 144 A

ingredients

Coadis™ 144 A is a universal pigment dispersant which provides outstanding performance accross a broad spectrum of waterborne exterior and interior coating formulations. It exhibits excellent stability and compatibility and is designed to enable maximized gloss potential while providing ideal viscosity, flow and wet adhesion from flat to high gloss systems.

Coadis™ 173

ingredients

Coadis™ 173 is a versatile polyacid dispersing agent imparting an excellent performance accross a wide range of waterborne paint formulations. It is designed for flat to semi-gloss paints, anticorrosion paints, caulks and sealants and other formulations showing high rates of mineral pigments and requiring a limited water absorption. Also suitable for oxide pigments and more specifically zinc oxides.

Coadis™ 234 K

ingredients

Coadis™ 234 K is a synthetic versatile dispersant for waterborne systems. Its use is recommended for a wide application field, including flat to glossy dispersion paints, thick film coating and plasters, and also organic pigment pastes (e.g. carbon black dispersion).

Coadis™ 335 A

ingredients

Coadis™ 335 A has been especially designed to quickly and efficiently disperse the pigments and fillers commonly utilized in waterborne traffic paints.

Coadis™ 3412

ingredients

Coadis™ 3412 is an acrylic copolymer dispersing agent particularly suitable for water or glycol based titanium dioxide and iron oxides dispersions.

Coadis™ 352 N

ingredients

Coadis™ 352 N is a water-based synthetic polycarboxylate dispersant that has been specially designed to quickly and efficiently disperse pigments and fillers. Coadis™ 352 N ensures the stability of the paint while not impacting drying time.

Coadis™ 615

ingredients

Coadis™ 615 is a water-based synthetic polycarboxylate dispersant that has been specially designed for industrial coatings and reactive binder systems.

Coadis™ 790

ingredients

Coadis™ 790 is a high molecular weight wetting and dispersing agent for water-based industrial & architectural coatings, inks and pigment concentrates. It is supplied as a solution of block copolymer with pigment anchorage groups. It is a low viscosity, non-ionic, APEO, VOC and solvent-free grade.

Coadis™ A 122

ingredients

Coadis™ A 122 is a dispersing agent based on a carboxylated polymer and especially designed for aqueous systems containing zinc oxides.

Coadis™ BR 3

ingredients

Coadis™ BR 3 is an acrylic copolymer dispersing agent particularly suitable for water or glycol based titanium dioxide and iron oxides dispersions.

Coadis™ BR 40

ingredients

Coadis™ BR 40 is a gloss emulsion paints must have the following properties: - The highest initial gloss

Coadis™ BR 85

ingredients

Coadis™ BR 85 is an original solution for deflocculation and steric stabilization of Titanium Dioxide and of other fine high value pigments. Coadis™ BR 85 develops specific affinities for pigments and binders, bringing unique properties. Coadis™ BR 85 is derived from Coatex proprietary Bumper Technology Coadis™ BR 85 benefits: Reduce Ti02 consumption through optimized dispersion, Boost optical properties and Improve in-can stability of Alkyd Emulsion Paints while keeping high fluidity.

COADIS™ BR 90

ingredients

Coadis™ BR 90 is an original solution for deflocculation and steric stabilization of Titanium dioxide, fillers and other fine high value pigments. Coadis™ BR 90 develops specific affinities for pigments and binders, bringing unique properties. Coadis™ BR 90 is derived from Coatex proprietary Bumper Technology™.

Coadis™ OP 10

ingredients

Coadis™ OP 10 is an organic pigment dispersion, and grinding sometimes has to be done by the paint and ink manufacturers themselves; Coadis™ OP 10 has been especially elaborated to get pigment pastes with a high solids content and a high efficiency of the pigment.

Coapur™ 2020 W

ingredients

Coapur™ 2020 W is a solvent and Alkyl Phenol Ethoxylate (APE) free associative polyurethane thickener designed for water-based formulations. Coapur™ 2020 W can be used alone or in combination with other polyurethane thickeners or with any type of rheology modifiers, such as acrylic or cellulosic thickeners, acting at low shear rates. Coapur™ 2020 W is a pure associative thickener. It is designed to interact strongly with the binder of the formulation, allowing for control of the rheology at high shear rates. Coapur™ 2020 W helps to match the highest coating quality possible for water-based formulations.

Coapur™ 2025

ingredients

Coapur™ 2025 is a solvent- and Alkyl Phenol Ethoxylate (APEO)- free associative polyrethane thickener designed for use in water-based formulations. Coapur™ 2025 can be used alone or in combination with other polyurethane thickeners or with any type of rheology modifier, such as acrylic or cellulosic thickeners, acting at low shear rates. Coapur™ 2025 is a pure associative thickener. It is designed to interact strongly with the blinder of the formulation, in order to control the rheology at high shear rates. Coapur™ 2025 helps to match the highest coating quality possible for water-based formulations.

Coapur™ 2501

ingredients

Coapur™ 2501 is a non-ionic, associative, and solvent-free polyurethane (HEUR) rheology modifier providing a pure Newtonian rheology to water-borne systems. Coapur™ 2501 allows for the adjustment of selectively high shear viscosities and thus ensures excellent film build, spatter resistance, and levelling together with the flexibility of use.

Coapur™ 2740

ingredients

Coapur™ 2740 is a solvent and Alkyl Phenol Ethoxylate (APE) free associative polyurethane thickener designed for water-based formulations. Coapur™ 2740 can be used alone or in combination with other polyurethane thickeners or with any type of rheology modifier, such as acrylic or cellulosic thickeners, which act at low shear rates. Coapur™ 2740 is a pure associative thickener. It is designed to interact strongly with the binder of the formulation, allowing for control of the rheology at high shear rates. Coapur™ 2740 helps to match the highest coating quality possible for water-based formulations.

Coapur™ 3020

ingredients

Coapur™ 3020 is a solvent-free and APEO-free pure associative polyurethane thickener (also called HEUR, NISAT, or NSAT). It provides a pure Newtonian rheology to water-borne systems. It allows for adjusting selectively high shear viscosities and thus ensures excellent film build, spatter resistance, and leveling together with low dosage and flexibility of use.

COAPUR™ 3020 BB

ingredients

Coapur™ 3020 BB is a 90% bio-based HEUR thickener. Coapur™ 3020 BB is a solvent-free and APEO-free pure associative polyurethane thickener (also called HEUR, NISAT, or NSAT). It provides a pure Newtonian rheology to water-borne systems. It allows for adjusting selectively high shear viscosities and thus ensures excellent film build, spatter resistance, and leveling together with low dosage and flexibility of use.

Coapur™ 3025

ingredients

Coapur™ 3025 is a solvent-free and APEO-free pure associative polyurethane thickener (also called HEUR, NISAT, or NSAT). It provides a pure Newtonian rheology to water-borne systems. It allows for adjusting selectively high shear viscosities and thus ensures excellent film build, spatter resistance, and leveling together with low dosage and flexibility of use.

Coapur™ 4820

ingredients

Coapur™ 4820 is a solvent and Alkyl Phenol Ethoxylate (APE) free polyurethane thickener designed for all types of water-based formulations, especially the solvent-free formulations. Coapur™ 4820 can be used alone or in combination with other polyurethane thickeners or with other types of rheology modifiers, such as acrylic or cellulosic thickeners. Coapur™ 4820 provides excellent coating properties due to its high associative effectiveness with every kind of binder. Coapur™ 4820 increases specifically the viscosities at medium and high shear rates in order to improve tool load, film build, levelling and brush drag. Thanks to its exclusive rheological features, Coapur™ 4820 also prevents from settling and sagging tendency in low PVC formulations.

Coapur™ 520 W

ingredients

Coapur™ 520 W is a solvent-free and APEO-free HEUR thickener. It provides a very balanced rheology profile, contributing to both high-shear and medium-shear viscosities. As a consequence, it provides very good leveling in satin paints and improves spattering resistance significantly, while also offering some anti-settling properties. Furthermore, it provides very good response and efficiency in VAE binders. This new polyurethane thickener could therefore easily replace the use of a combination of high-shear and low-shear thickeners.

Coapur™ 5535

ingredients

Coapur™ 5535 is a solvent - and emission-free associative non-ionic thickener designed to provide a high thickening effectiveness in water-borne coatings based on the most recent solvent-free binders (e.g., terpolymers). Coapur™ 5535 use is therefore very cost-effective in matt and semi-gloss dispersion paints, where properties such as in-can structure, brushability, and film build are needed.

Coapur™ 6050

ingredients

Coapur™ 6050 is an associative polyurethane allowing fine rheological adjustment of flat or semi-gloss paints. Coapur™ 6050, characterized by its thickening efficiency at low shear rate, is the logical complement to Coapur™ 3025.

Coapur™ 817 BB

ingredients

Coapur™ 817 BB is a 93% bio-based HEUR thickener. Coapur™ 817 BB is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It can be used sole or in combination with other polyurethane thickeners or with other types of rheology modifiers such as acrylic or cellulosic thickeners. It increases specifically viscosities at medium and high shear rates in order to improve tool load, film build, leveling, and brush drag.

Coapur™ 817 W

ingredients

Coapur™ 817 W is a solvent-free and APEO-free pure associative polyurethane thickener (also called HEUR, NISAT, or NSAT). It can be used alone or in combination with other polyurethane thickeners or with other types of rheology modifiers such as acrylic or cellulosic thickeners. It increases specifically viscosities at medium and high shear rates in order to improve tool load, film build, leveling and brush drag.

Coapur™ 830 W

ingredients

Coapur™ 830 W is a solvent and Alkyl Phenol Ethoxylate (APE) free polyurethane thickener designed for all types of water-based formulations, especially the solvent-free formulations. Coapur™ 830 W can be used alone or in combination with other polyurethane thickeners or with other types of rheology modifiers, such as acrylic or cellulosic thickeners. Coapur™ 830 W provides excellent coating properties due to its high associative effectiveness with every kind of binder. Coapur™ 830 W increases specifically the viscosities at medium and high shear rates in order to improve tool load, build film, levelling and brush drag. Thanks to its exclusive rheological features, Coapur™ 830 W also prevents settling and sagging tendency in low PVC formulations.

Coapur™ 975 W

ingredients

Coapur™ 975 W is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It offers a unique pseudoplastic rheology profile, performing strongly at medium shear rates while contributing significantly at high shear rates.

Coapur™ 980 W

ingredients

Coapur™ 980 W offers a unique pseudo plastic rheology profile, performing strongly at medium shear rates while contributing significantly at high shear rates. It achieves a low shear viscosity while maintaining a reasonably high value to help optimize both levelling and sag resistance. Coapur™ 980 W is a solvent-, Alky Phenol Ethoxylates (APEO)-, tin-, and heavy metal-free associative polyurethane thickener, opening new perspectives, particularly for low-emission water-based paints that require an attractive in-can appearance, tool load, outstanding coating properties, and color acceptance. Coapur™ 980 W is easy to use and suitable for automatic dosing systems thanks to its low viscosity. Coapur™ 980 W is designed to be used alone or in combination, ideally with high shear viscosity builders such as Coapur™ 2025, when specifically increasing brush drag, film build, or spatter resistance is required.

Coapur™ XS 12

ingredients

Coapur™ XS 12 is a solvent and Alkyl Phenol Ethoxylate (APE) free associative polyurethane thickener designed for water-based formulations. Coapur™ XS 12 can be used alone or in combination with other polyurethane thickeners or with any type of rheology modifiers, such as acrylic or cellulosic thickeners, acting at low shear rates. Coapur™ XS 12 is a pure associative thickener. It is designed to interact with the binder of the formulation, in order to control the rheology selectively at high shear rates with the least impact at low and medium shear rates. Coapur™ XS 12 helps achieve the highest coating quality possible for water-based formulations by optimizing flow and leveling.

Coapur™ XS 22

ingredients

Coapur™ XS 22 is a alkyd emulsion binders that interact in a specific way with fillers, pigments, and various hydrophobically modified additives in comparison with current water-based emulsion binders (acrylic, styrene acrylic, ethylene vinyl acetate). Their reactivity is generally stronger, which results in higher viscosities, particularly at low shear rates, and poorer storage stability. Considering those requirements, Coatex has designed Coapur™ XS 22, a specific thickener for an alkyd emulsion system.

Coapur™ XS 71

ingredients

Coapur™ XS 71 is a solvent-free polyurethane thickener recommended for water-based systems, which should combine high viscosity with excellent pigment compatibility, for further use on a tinting machine or manual coloration. Coapur™ XS 71 offers a unique pseudoplastic rheology profile, performing strongly at medium shear rates and significantly at high shear rates. Its use ensures a smooth structure and an optimized ease of coat with no spatter. Coapur™ XS 71 ensures the best color development possible while using pigment pastes, even in the presence of problematic binders. The use of Coapur™ XS 71 limits viscosity drop after pigment paste addition, eliminates pigment flooding and floating during storage, and enables matching excellent results based on the rub-out test.

Coapur™ XS 83

ingredients

Coapur™ XS 83 is a solvent-free polyurethane thickener recommended for use in water-based systems, which should combine high in-can viscosities with excellent pigment compatibility, suitable for tinting machines, manual coloration, industrial, and architectural coatings.Coapur™ XS 83 provides a unique pseudoplastic rheology profile with a strong shear-tinning behavior. Its use ensures a smooth structure and an optimized ease of application by spray, roller, or brush. The highly pseudoplastic rheology profile, combined with a fast recovery of the viscosity following the application makes the Coapur™ XS 83 suitable for industrial and decorative applications requiring high film thicknesses and excellent sag resistance. Coapur™ XS 83 contributes to improving color strength and reducing rub-out issues when using pigment pastes, even in the presence of problematic binders. The use of Coapur™ XS 83 also limits viscosity drop after pigment paste addition, pigment flooding, and floating during storage.

CRAYVALLAC® 60P

ingredients

CRAYVALLAC® 60P is a solid powder wax consisting of fine particles of oxidized polyethylene recommended to prevent irreversible hard settling. The fine nature of this dispersion means that CRAYVALLAC® 60P is easily incorporated and activated in coating systems. It is mainly used in industrial and maintenance coatings where its primary function is to provide pigment suspension without any increase in the apparent viscosity. CRAYVALLAC® 60P can generally be used in most solvent-based formulations. Typical applications are epoxy primers, vinyl primers, anti-fouling paints, road marking paints and chlorinated rubber coatings.

CRAYVALLAC® 60X

ingredients

CRAYVALLAC® 60X is a waxy solid paste consisting of very fine droplets of oxidized polyethylene dispersed in xylene recommended to prevent irreversible hard settling. The fine nature of this dispersion means that CRAYVALLAC® 60X is easily incorporated and activated in coating systems. It is mainly used in industrial and maintenance coatings where its primary function is to provide pigment suspension without any increase in the apparent viscosity. CRAYVALLAC® 60X can generally be used in most solvent-based formulations. Typical applications are epoxy primers, vinyl primers, anti-fouling paints, road marking paints and chlorinated rubber coatings.

CRAYVALLAC® A-2201-M

ingredients

CRAYVALLAC® A-2201-M is a high performance polyacrylate surface tension modifier for the control of coating surface properties. CRAYVALLAC® A-2201-M is suitable for use in a wide range of solvent based systems and applications. CRAYVALLAC® A-2201-M has been developed specifically to enhance substrate wetting and to improved leveling. As a result when compared with unadditivated coating, film deffects such as craters, fisheyes, orange peel and pinholes are reduced and a superior orverall appearance of the film is visible. CRAYVALLAC® A-2201-M can be used as well as an air release agent in solvent-based high solids sytems applied by airless spray.

CRAYVALLAC® A-2678-M

ingredients

CRAYVALLAC® A-2678-M is a high-performance acrylic dispersing and flow control agent for the control of coating surface properties. CRAYVALLAC® A-2678-M has been developed specifically to eliminate film surface defects that may occur during film formation. The following benefits are to be gained by using CRAYVALLAC® A-2678-M in water-based coatings: Enhanced substrate wetting and coating levelling, reduced craters, fisheyes, and pinholes. The results of these enhancements are smoother films with fewer imperfections and a superior overall appearance (measurable with glow and DOI) when compared with the unmodified coating.

CRAYVALLAC® A-620-A2

ingredients

CRAYVALLAC® A-620-A2 is a high performance polyacrylate surface tension modifier for the control of coating surface properties. CRAYVALLAC® A-620-A2 is suitable for use in a wide range of solvent based systems and applications.CRAYVALLAC® A-620-A2 has been developed specifically to enhance substrate wetting and to improved leveling. As a result when compared with unadditivated coating, film deffects such as craters, fisheyes, orange peel and pinholes are reduced and a superior orverall appearance of the film is visible.

CRAYVALLAC® A-72-A2-60

ingredients

CRAYVALLAC® A-72-A2-60 is a high performance polyacrylate surface tension modifier for the control of coating surface properties. CRAYVALLAC® A-72-A2-60 is suitable for use in a wide range of solvent based systems and applications.CRAYVALLAC® A-72-A2-60 has been developed specifically to enhance substrate wetting and to improved leveling. As a result when compared with unadditivated coating, film deffects such as craters, fisheyes, orange peel and pinholes are reduced and a superior orverall appearance of the film is visible with no degradation of the exterior durability.

CRAYVALLAC® ANTISETTLE CVP

ingredients

CRAYVALLAC® ANTISETTLE CVP is a micronised hydrogenated castor oil rheology modifier for solvent-based and solvent-free systems. CRAYVALLAC® ANTISETTLE CVP particles are converted during formulation to an interacting network of fiber like particles. It is this network that gives rise to the final coating’s shear thinning rheology. This shear-thinning characteristic provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application.In addition to coatings applications, CRAYVALLAC® ANTISETTLE CVP has also been used successfully in a multitude of other applications.

CRAYVALLAC® D-801

ingredients

CRAYVALLAC® D-801 is a high molecular weight wetting and dispersing agent for solvent-based systems and pigment concentrates. The CRAYVALLAC® D-801 is supplied as a solution of block copolymers with pigment anchorage groups with the following benefits: Prevents from pigment reflocculation by steric hindrance , Stabilizes colour strength, Improves pigments wetting, Allows higher pigment loading, Reduces grinding time, Improves gloss and levelling, Does not influence paint durability and Shows wide compatibility with various resin systems

CRAYVALLAC® EF 30P

ingredients

CRAYVALLAC® EF 30P is a low molecular weight styrene-maleic anhydride copolymer with an approximate 3:1 mole ratio. It is used as a matting agent in epoxy or epoxy/polyester powder coating formulations. Excellent results are obtained by combining CRAYVALLAC® EF 30P with REAFREE 6489-TS, Carboxylated Polyester resin. The very good colour stability of formulations containing CRAYVALLAC® EF 30P as matting additive, enables the production of low gloss white and pale colour paints. CRAYVALLAC® EF 30P has been developed specifically to provide matting effect in powder coatings.

CRAYVALLAC® EXTRA

ingredients

CRAYVALLAC® EXTRA is a high performance, micronised amide wax rheology modifier suitable for high-solids and solvent-free applications with very high robustness. It is especially recommended in 2K epoxy primers for its high temperature tolerance.CRAYVALLAC® EXTRA overcomes those difficulties which exist with hydrogenated castor oil based rheology modifiers e.g. seeding and false-body and that were maximised when activation was performed at high temperatures.

CRAYVALLAC® FLOW-100

ingredients

CRAYVALLAC® FLOW-100 is a high performance polyacrylate surface tension modifier for the control of coating surface properties. CRAYVALLAC® FLOW-100 is suitable for use in a wide range of solvent based systems and applications.CRAYVALLAC® FLOW-100 has been developed specifically to enhance substrate wetting and to improved leveling for solvent-based, high-solids, solvent-free and powder coatings. This high performance product functions primarily by reducing the surface energy of the coating to give enhanced substrate wetting and an improvement to flow and leveling. The following benefits are to be gained by using CRAYVALLAC® FLOW-100 when compared with unadditivated coating : film defects such as craters, fisheyes, orange peel and pinholes are reduced where a superior orverall appearance of the film is visible with no degradation of the exterior durability.

CRAYVALLAC® FLOW-200

ingredients

CRAYVALLAC® FLOW-200 is a high performance polyester based flow and leveling agent for the control of surface properties. CRAYVALLAC® FLOW-200 is suitable for use in a wide range of solvent based systems and applications.CRAYVALLAC® FLOW-200 has been developed specifically to eliminate film surface defects that may occur during the film formation. This high performance product functions primarily by reducing the surface tension of the coating to give enhanced substrate wetting and an improvement to flow and leveling. The results of these enhancements are smoother films with fewer imperfections and a superior overall appearance when compared with the unmodified coating.

CRAYVALLAC® FLOW-400

ingredients

CRAYVALLAC® Flow-400 is used to improve flow and eliminate air entrapment, orange peel, pinholes, craters and other surface defects. It is an additive based on Acrylate technology to provide excellent ageing resistance to coatings. CRAYVALLAC® Flow-400 is also used as an adhesion promoter additive with excellent performance. CRAYVALLAC® Flow-400 is soluble in many solvents such as ketones, aromatics, mineral spirits, esters, glycol ethers and chlorinated hydrocarbons. CRAYVALLAC® Flow-400 is easily incorporated into formulations due to its wide compatibility and good solubility in most solvents. In Powder coatings, it is recommended to introduce the CRAYVALLAC® Flow-400 by hot blend or even dry blend. The method of incorporating CRAYVALLAC® Flow-400 into coating formulation does not affect the performance of the coating as long as it is uniformly dispersed in the system. This can be achieved by thoroughly mixing it with the other paint ingredients or by master batching the product in a base resin.

CRAYVALLAC® FLOW-450

ingredients

CRAYVALLAC® FLOW-450 is used to improve flow and eliminate air entrapment, orange peel, pinholes, craters and other surface defects. It is an additive based on polyacrylate technology to provide excellent ageing resistance to coatings. CRAYVALLAC® FLOW-450 is also used as an adhesion promoter additive with excellent performance. CRAYVALLAC® FLOW-450 can furthermore successfully substitute classical defoamers within a formulation, demonstrating combined performance in terms of leveling and defoaming. CRAYVALLAC® FLOW-450 is easily incorporated into formulations due to its wide compatibility in most solvents. It is recommended to incorporate CRAYVALLAC® FLOW-450 in the mill-base in order to get maximum efficiency in terms of air release properties.

CRAYVALLAC® FLOW-465

ingredients

CRAYVALLAC® FLOW-465 is used to improve flow and eliminate air entrapment, orange peel, pinholes, craters and other surface defects. It is an additive based on polyacrylate technology to provide excellent ageing resistance to coatings. CRAYVALLAC® FLOW-465 is easily incorporated into formulations due to its wide compatibility in most solvents. It is recommended to incorporate CRAYVALLAC® FLOW-465 in the mill-base in order to get maximum efficiency in terms of air release properties.

CRAYVALLAC® LA-150

ingredients

CRAYVALLAC® LA-150 is a new pourable liquid rheology modifier supplied in Dimethylsulfoxide (DMSO) for post addition to solvent based systems.CRAYVALLAC® LA-150 is a post-addition rheology modifier composed of a modified urea dissolved in DMSO. When added to the final system, the DMSO is diluted and the modified urea crystallizes out as very fine fibres which build into a three-dimensional interacting network. It is this network that gives rise to the system’s shear thinning rheology and time dependent viscosity recovery. The result is excellent control of sedimentation combined with ease of application. Immediately following application, where low shear conditions again predominate, the system’s viscosity undergoes a time dependent recovery as the network re-establishes itself. This time dependency is known as thixotropy and enables the final system to attain very good levelling.

CRAYVALLAC® LA-250

ingredients

CRAYVALLAC® LA-250 is a modified urea dissolved in DMSO and is a pourable liquid rheology modifier for post addition to low polarity solvent based coatings. CRAYVALLAC® LA-250 should be added to the coating as a slow stream under low to medium shear conditions to ensure sufficient dispersion. Although efficient stirring is required to ensure homogeneity, elevated temperatures are not required for activation and the use of excessive shear should be avoided.

CRAYVALLAC® LA-377

ingredients

CRAYVALLAC® LA-377 is a modified urea dissolved in DMSO. CRAYVALLAC® LA-377 is a pourable liquid rheology modifier for post addition to water-based coatings such as water-dilutable alkyds and acrylic emulsions. It was developed to ensure particular suitability for metal coating as its formula is lithium chloride-free. CRAYVALLAC® LA-377 should be added to the coating as a slow stream under low to medium shear conditions to ensure sufficient dispersion. Although efficient stirring is required to ensure homogeneity, elevated temperatures are not required for activation and the use of excessive shear should be avoided.

CRAYVALLAC® LV

ingredients

CRAYVALLAC®LV is a high performance, micronised amide wax rheology modifier suitable for very high-solids and solvent-free applications.CRAYVALLAC® LV overcomes those difficulties which exist with hydrogenated castor oil based rheology modifiers e.g. seeding and false-body. Consequently, coatings formulated using CRAYVALLAC® LV exhibit an enhanced performance such as controlled flow behavior, ease of application and excellent sag resistance. Its very high efficiency even when activated allows to reach very strong shear thinning that can result either in very high sag resistance or interresting balance between viscosity and sag resistance. Therefore CRAYVALLAC® LV is for instance highly recommended in the case of solvent free coatings with relatively low viscosity. It prevents the use of specific equipment for the application that are necessary with more viscous solvent-free coatings.

CRAYVALLAC® MT

ingredients

CRAYVALLAC® MT is a micronised amide modified hydrogenated castor oil rheology modifier for solvent-based and solvent-free systems. CRAYVALLAC® MT is suited to systems based on aliphatic hydrocarbons, aromatic hydrocarbons and aromatic hydrocarbon/alcohol blends. Compared to the most basic hydrogenated castor oil based rheology modifiers, CRAYVALLAC® MT is more tolerant to stronger solvents. CRAYVALLAC® MT particles are converted upon activation into an interacting network of fibre like particles. This network gives rise to the final coating’s shear thinning rheology. This shear thinning characteristic provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application.

CRAYVALLAC® Optima

ingredients

CRAYVALLAC® OPTIMA is a high performance, micronised amide wax rheology modifier suitable for high-solids and solvent-free applications recommended for its ease of activation and smooth viscosity recovery (good levelling). CRAYVALLAC® OPTIMA overcomes those difficulties which exist with hydrogenated castor oil based rheology modifiers e.g. seeding and false-body without the need of increasing the temperature of activation. Its smooth viscosity recovery will help to achieve high film thickness without compromising a good levelling.

CRAYVALLAC® PA3 BA 20

ingredients

CRAYVALLAC® PA3 BA 20 is a HAPs-free pre-activated amide wax supplied in a mixture of butyl acetate and alcohol. It is a rheology modifier in paste form with high efficiency (optimum sag resistance and viscosity).CRAYVALLAC® PA3 BA 20 is supplied in the form of crystalline fibres. In a coating system, these fibres form an interacting network. This network gives rise to the shear thinning rheology of the final coating. This shear thinning characteristic provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application.

CRAYVALLAC® PA3 WDA 20

ingredients

CRAYVALLAC® PA3 WDA 20 is a pre-activated amide wax supplied in a mixture of mineral spirit (D60) and alcohols. Under paste form for post-addition to solvent-based low polarity coating systems, it provides a shear-thinning rheology with thixotropic viscosity recovery to coating formulations. In coating systems, its crystalline fibres form an interacting network which gives rise to the shear-thinning rheology of the final coating. It provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application. Immediately following application, the coating’s viscosity undergoes a time dependent recovery as the network re-establishes itself. This time dependence is known as thixotropy and enables the final coating to attain very good levelling.

CRAYVALLAC® PA3 X 20

ingredients

CRAYVALLAC® PA3 X 20 is a pre-activated amide wax supplied in a mixture of xylene and alcohols. It is a rheology modifier in paste form for post-addition to solvent-based industrial systems. The use of CRAYVALLAC® PA3 X 20 provides a very simple and direct mean of introducing shear-thinning rheology with thixotropic viscosity recovery to formulations.

CRAYVALLAC® PA3 XAF 20

ingredients

CRAYVALLAC® PA3 XAF 20 is an alcohol-free pre-activated amide wax supplied in xylene. It is a rheology modifier in paste form with high efficiency (optimum sag resistance and viscosity).CRAYVALLAC® PA3 XAF 20 is supplied in the form of crystalline fibres. In a coating system, these fibres form an interacting network. This network gives rise to the shear thinning rheology of the final coating. This shear thinning characteristic provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application.

CRAYVALLAC® PA4 BA 20

ingredients

CRAYVALLAC® PA4 BA 20 is a HAPs-free rheology modifier pre-activated amide wax supplied in a mixture of butyl acetate and alcohol. It is a rheology modifier in paste form with enhanced transparency, excellent anti-sagging and anti-settling properties.CRAYVALLAC® PA4 BA 20 is supplied in the form of crystalline fibres. In a coating system, these fibres form an interacting network. This network gives rise to the shear thinning rheology of the final coating. This shear thinning characteristic provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application.

CRAYVALLAC® PA4 WDA 12

ingredients

CRAYVALLAC® PA4 WDA 12 is a pre-activated amide wax supplied in a mixture of mineral spirit (D60) and alcohols. Under paste form for post addition to solvent-based low polarity coating systems, it provides a very simple and direct mean of introducing shear-thinning rheology with thixotropic viscosity recovery to coating formulations. It is a softer version than CRAYVALLAC® PA3 WDA 20 with enhanced ease of incorporation. It is also a very cost efficient alternative to organoclays. The shear-thinning characteristic provides a very high viscosity under the low shear rates and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application. Immediately following application, the coating’s viscosity undergoes a time dependent recovery as the network re-establishes itself. This time dependence is known as thixotropy and enables the final coating to attain very good levelling.

CRAYVALLAC® PA4 X 20

ingredients

CRAYVALLAC® PA4 X 20 is a rheology modifier pre-activated amide wax supplied in a mixture of xylene and alcohol. It is a rheology modifier in paste form with enhanced transparency, excellent anti-sagging and anti-settling properties.CRAYVALLAC® PA4 X 20 is supplied in the form of crystalline fibres. In a coating system, these fibres form an interacting network. This network gives rise to the shear thinning rheology of the final coating. This shear thinning characteristic provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application.

CRAYVALLAC® PA5 XSR 25

ingredients

CRAYVALLAC® PA5 XSR 25 is a pre-activated amide wax dispersed in xylene. CRAYVALLAC® PA5 XSR 25 is an alcohol-free version of polyamide paste, such as PA3 X 20, with an enhanced robustness to extended high-speed dispersion. It is a rheology modifier in paste form for solvent-based industrial coatings, industrial wood finishes, protective, and marine coatings. The use of CRAYVALLAC® PA5 XSR 25 provides a very simple and direct means of introducing shear-thinning rheology with thixotropic viscosity recovery to coating formulations. CRAYVALLAC® PA5 XSR 25 is a pre-activated amide paste and exists in the form of crystalline fibres. In a coating system, these fibres form an interacting network. It is this fibrous network that gives rise to the shear-thinning rheology of the final coating.

CRAYVALLAC® PC

ingredients

CRAYVALLAC® PC is a micronised hydrogenated castor oil derivative surface enhancing additive for powder coatings based on PRIMID, hybrid and TGIC technologies. CRAYVALLAC® PC is easily incorporated using conventional pre-mixing techniques prior to extrusion. The use of CRAYVALLAC® PC leads to a substantial improvement in the appearance of the final cured powder coating. This improvement is due to CRAYVALLAC® PC enhancing the flow, levelling and degassing processes during cure. This is the result of CRAYVALLAC® PC greatly reducing the melt viscosity during this critical levelling stage in the cure cycle. This viscosity reduction also enhances the performance of other additives such as acrylic levelling agents and the degassing agent benzoin. CRAYVALLAC® PC works well in both clear and pigmented powder coating systems based on PRIMID, Hybrid and TGIC technologies.

CRAYVALLAC® PF

ingredients

CRAYVALLAC® PF is a modified micronised hydrogenated castor oil rheology modifier specially designed to facilitate the incorporation in powder form for better activation and easier handling. The activation process is the conversion of the CRAYVALLAC® PF fine particles to an interacting network of fibers. It is this network that gives rise to the final system’s shear thinning rheology. This shear-thinning behavior provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application. CRAYVALLAC® PF is suitable for a multitude of applications.

CRAYVALLAC® REV

ingredients

CRAYVALLAC® REV is a new high performance micronised amide wax rheology modifier offering perfect recoatability for regular, high solids and solvent-free coatings. CRAYVALLAC® REV has been designed to provide reliability and efficiency in a wide range of coatings. Like other CRAYVALLAC® modifiers, it overcomes technical constraints such as seeding, false-body, and migration of readily dissolved species to the surface. Even used in strong solvent systems, coatings formulated using CRAYVALLAC® REV offer an enhanced performance and very good recoatability.

CRAYVALLAC® SF

ingredients

CRAYVALLAC® SF is a proprietary amide-modified hydrogenated castor oil rheology modifier with an enhanced tolerance to temperature and solvent strength suitable for a variety of different solvent-based systems e.g. aromatic hydrocarbons and aromatic hydrocarbon/alcohol blends. Compared to other hydrogenated castor oil based rheology modifiers, CRAYVALLAC® SF is more tolerant to strong solvents and high processing temperatures due to the presence of its unique performance enhancing amide. The activation process constitutes the conversion of the CRAYVALLAC® SF particles to an interacting network of fibre-like particles. It is this network that gives rise to the final coating’s shear thinning rheology. This shear thinning characteristic providesa very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application.

CRAYVALLAC® SL

ingredients

CRAYVALLAC® SL is a high performance micronised amide wax rheology modifier designed for the high temperature manufacture of moisture curing methoxysilanes systems, where processing temperatures typically lie within the range 90 – 115°C. CRAYVALLAC® SL particles are converted to an interacting network of crystalline fibres. It is this network that gives rise to the shear thinning rheology. This shear thinning characteristic provides for a low viscosity at the shear rates associated with application by extrusion, and a very high viscosity under the low shear rates experienced after application. The net result is ease of application followed by excellent sag and slump resistance.

CRAYVALLAC® SLT

ingredients

CRAYVALLAC® SLT is a high performance micronised amide wax rheology modifier designed for activation-free manufacture of moisture curing methoxysilane based systems. Simple stirring is only necessary to get full efficiency. CRAYVALLAC® SLT is also suitable for the activation-free manufacture of moisture curing methoxysilane based adhesives. CRAYVALLAC® SLT is specially designed for the low temperature manufacture of one-component methoxysilane sealants where processing temperatures typically lie within the range 30 – 80°C. CRAYVALLAC® SLT particles are converted to an interacting network of crystalline fibres. It is this network that gives rise to the shear thinning rheology. This shear thinning characteristic provides for a low viscosity at the shear rates associated with application by extrusion, and a veryhigh viscosity under the low shear rates experienced after application. The net result is ease of application followed by excellent sag and slump resistance.

CRAYVALLAC® SLW

ingredients

CRAYVALLAC® SLW is a high performance micronized amide wax rheology modifier designed for manufacture of one component Silyl-Terminated-Polymer based adhesives and sealants, especially for highly filled systems (demanding applications, High-Tack systems for instance).

CRAYVALLAC® SLX

ingredients

CRAYVALLAC® SLX is a high-performance micronised amide wax rheology modifier designed for the low-temperature manufacture of moisture-curing methoxysilane systems, where processing temperatures typically lie within the range 60 - 90°C. CRAYVALLAC SLX particles are converted into an interacting network of crystalline fibers. It is this network that gives rise to the shear thinning rheology. This shear thinning characteristic provides for a low viscosity at the shear rates associated with application by extrusion, and a very high viscosity under the low shear rates experienced after application. The net result is ease of application followed by excellent sag and slump resistance.

CRAYVALLAC® SUPER

ingredients

CRAYVALLAC® SUPER is a high-performance, micronised amide wax rheology modifier suitable for a wide range of solvent-based, high-solids, and solvent-free applications. CRAYVALLAC® SUPER overcomes those difficulties that exist with hydrogenated castor oil-based rheology modifiers, e.g., seeding and false-body. Consequently, coatings formulated using CRAYVALLAC® SUPER exhibit an enhanced performance such as controlled flow behavior, ease of application, and excellent sag resistance. Its smooth viscosity recovery will help to achieve high film thickness without compromising a good levelling.

CRAYVALLAC® ULTRA

ingredients

CRAYVALLAC® ULTRA is a pure polyamide especially recommended in 2K epoxy primers for its robustness. CRAYVALLAC® ULTRA is a micronised amide wax rheology modifier offering very good recoatability for ambient curing solvent-based epoxy coatings. CRAYVALLAC® ULTRA has been designed to overcome those difficulties that exist with older type organo-wax rheology modifiers, e.g., seeding, false-body, and migration of readily dissolved species to the surface. Consequently, when used in strong solvent systems, coatings formulated using CRAYVALLAC® ULTRA offer an enhanced performance and very good recoatability.

CRAYVALLAC® WN-1135

ingredients

CRAYVALLAC® WN-1135 is a micronized modified polypropylene matting agent for use in a wide range of applications. It imparts a smooth, silky feel and appearance, provides improved transparency in thin layers, enhances slip, and improves rub, abrasion, and scratch resistance.

CRAYVALLAC® WN-1150

ingredients

CRAYVALLAC® WN-1150 is used to control gloss between 30 – 60% for epoxy/polyester hybrid, HAA, and TGIC-based polyester powder coatings. No effect on weather ability or physical properties.

CRAYVALLAC® WN-1265

ingredients

CRAYVALLAC® WN-1265 is a micronized amide wax. In liquid coatings, CRAYVALLAC® WN-1265 is primarily used to enhance the sandability of solvent-based or water-based wood primers and sealers. An additional advantage to be gained in this application is the absence of bloom when used in acid-cured formulations. CRAYVALLAC® WN-1265 is also an effective internal lubricant for plastic compounding. In powder coatings, CRAYVALLAC WN-1265 improves degassing properties, allowing high-thickness applications of HAA-cured paints, even on difficult substrates.

CRAYVALLAC® WN-1442

ingredients

CRAYVALLAC® WN-1442 is a matting agent for use in liquid coatings while enhancing surface properties such as scratch and abrasion resistance. Its fine particle size distribution provides enhanced performance and ease of incorporation.

CRAYVALLAC® WN-1495

ingredients

CRAYVALLAC® WN-1495 is a matting agent for use in inks and liquid coatings while enhancing surface properties such as scratch and abrasion resistance. Its fine particle size distribution provides enhanced performance and ease of incorporation.

CRAYVALLAC® WN-1535

ingredients

CRAYVALLAC® WN-1535 is a micronized modified polypropylene wax designed as a matting agent for use in inks and liquid coatings while providing a smooth and silky feel. It is especially designed for water-based systems, where it shows ease of dispersability.

CRAYVALLAC® WN-1875

ingredients

CRAYVALLAC® WN-1875 is a finely micronized polymeric material for use in a wide range of water-based and solvent-based applications, where it provides a matting and satin effect. CRAYVALLAC® WN-1875 is resistant to those solvents and chemicals commonly used in the coatings industry. Heat resistance, weather resistance, and light stability are most favorable with this product.

CRAYVALLAC® WN-2950

ingredients

CRAYVALLAC® WN-2950 is a very fine micronized polyethylene wax providing specific mechanical and chemical resistance and used in printing inks and other demanding applications. CRAYVALLAC® WN-2950 imparts superior rub/mar resistance and slip properties with minimum effect on gloss. It is a high-melting-point wax with high hardness, heat, and solvent resistance. CRAYVALLAC® WN-2950 is particularly suited to “stir in” applications.

CRAYVALLAC® WN-3025

ingredients

CRAYVALLAC® WN-3025 is a finely micronized hard polyethylene wax. CRAYVALLAC® WN-3025, with its well-balanced performance properties, is of particular interest to the ink formulator. Here it provides an excellent balance between high rub resistance and good slip, yet with minimal detraction from gloss.

CRAYVALLAC® WS-4700

ingredients

CRAYVALLAC® WS-4700 is a 40% active dispersion of polyethylene wax in isopropanol. The low viscosity and high active content of this dispersion, together with freedom from dust, assist the efficiency of manufacturing processes. CRAYVALLAC® WS-4700 provides the formulator with the means of controlling the frictional characteristics of a coating as well as enhancing its surface protection properties.

CRAYVALLAC® WW-1001

ingredients

CRAYVALLAC® WW-1001 is a 40% active dispersion of polyethylene wax in water. The low viscosity and high active content of this dispersion, together with freedom from dust, assist the efficiency of manufacturing processes. CRAYVALLAC® WW-1001 provides the formulator with the means of controlling the frictional characteristics of a coating as well as enhancing its surface protection properties.

CRAYVALLAC® WW-9500

ingredients

CRAYVALLAC® WW-9500 is a 35% active dispersion of modified polypropylene wax in water.The low viscosity and high active content of this dispersion together with freedom from dust assist the efficiency of manufacturing processes.CRAYVALLAC® WW-9500 provides the formulator with the means of controlling the frictional characteristics of a coating as well as enhancing its surface protection properties.It also retards the settlement of pigments and assists in their redispersion.

Ecodis™ 326

ingredients

Ecodis™ 326 has been especially designed to quickly and efficiently disperse the pigments and fillers commonly utilized in waterborne traffic paints.Ecodis™ 326 ensures the stability of the paint.

Ecodis™ 345

ingredients

Ecodis™ 345 has been especially designed to quickly and efficiently disperse the pigments and fillers commonly utilized in waterborne traffic paints.Ecodis™ 345 ensures excellent heat age and viscosity stability.

Ecodis™ 40

ingredients

Ecodis™ 40 is a sodium-neutralized polyacrylate dispersing agent for water-based systems. It ensures the complete dispersion of extenders and inorganic pigments at high solids contents in systems showing medium to high PVC (Pigment Volume Concentration). Very versatile and suitable for titanium dioxide, Kaolin, and calcium carbonates. Besides dispersion paints, the main applications are in adhesives and sealants.

Ecodis™ 80

ingredients

Ecodis™ 80 is an ammonium-neutralized polyacrylate dispersing agent for water-based systems. It ensures the complete dispersion of extenders and inorganic pigments at high solids contents in systems showing medium to high PVC (Pigment Volume Concentration). Very versatile and suitable for titanium dioxide, Kaolin, and calcium carbonates. Besides dispersion paints, the main applications for Ecodis™ 80 are in adhesives and wallpaper pastes.

ECODIS™ C 20

ingredients

ECODIS™ C 20 is a dispersion paint that is usually formulated with fillers or extenders, particularly the very fine calcium carbonates and clays now available. Their dispersion in water based systems must be achieved easily with common stirrers without forming agglomerates or causing a viscosity build up. Usual inorganic dispersants such as phosphate based dispersants are not able to solve this problem satisfactorily: their deflocculating effectiveness is limited by the fineness of the extenders used and their poor temperature stability (degradation through hydrolysis) affects the long term stability of paints. Ecodis™ C 20 has been especially developed to ensure the complete dispersion of extenders and inorganic pigments at high solids contents in systems showing medium to high PVC (Pigment Volume Concentration).

Ecodis™ C 30

ingredients

Ecodis™ C 30 has been especially developed as a lighter colored version of Ecodis™ P 30 with limited color evolution upon storage. It ensures the complete dispersion of extenders and inorganic pigments at high solids contents in systems showing medium to high PVC.

Ecodis™ N

ingredients

Ecodis™ N is a cost-effective dispersant recommended for use in matt dispersion paints. It contributes to shortening the time needed for a proper incorporation of usual fillers and pigments (calcium carbonate, titanium dioxide) even when a high concentration in solids is required. Ecodis™ N also helps to ensure long-term viscosity stability to dispersion paints showing a high solids content and/or a high PVC (pigment volumic concentration).

Ecodis™ NP

ingredients

Ecodis™ NP is designed to disperse and stabilize a wide range of fillers, extenders and inorganic pigments. It enables achieving mill bases with a high solids content and simultaneously a low viscosity using the most common stirrers or deflocculating tools. Ecodis™ NP is particularly adapted for the dispersion of fine calcium carbonates, clays, and high-value pigments such as titanium dioxide across a wide range of water-based formulations. It ensures a very good storage stability even for formulations stored for a long time at higher temperatures, which is not the case with inorganic additives such as phosphate-based dispersants. Ecodis™ NP contributes to reducing formulation costs thanks to its high effectiveness and the reduction of grinding time.

Ecodis™ P 30

ingredients

Ecodis™ P 30 is a dispersion paint that is usually formulated with fillers or extenders, particularly the very fine calcium carbonates and clays now available. Their dispersion in water-based systems must be achieved easily with common stirrers without forming agglomerates or causing a viscosity buildup. Usual inorganic dispersants, such as phosphate-based dispersants, are not able to solve this problem satisfactorily: their deflocculating effectiveness is limited by the fineness of the extenders used, and their poor temperature stability (degradation through hydrolysis) affects the long-term stability of paints. Ecodis™ P 30 has been especially developed to overcome these problems. It ensures the complete dispersion of extenders and inorganic pigments at high solids contents in systems with medium to high PVC content.

Ecodis™ P 30 MB

ingredients

Ecodis™ P 30 MB is the Mass Balance version of the Ecodis™ P 30 with a Bio-attributed content of 100%. It allows a significant reduction of the product's carbon footprint compared to its fossil version. Ecodis™ P 30 MB achieves exactly the same performance as the Ecodis™ P 30 and can be readily used and implemented as a direct drop-in.

Ecodis™ P 30-30

ingredients

Dispersion paints are usually formulated with fillers or extenders, particularly the very fine calcium carbonates and clays now available. Their dispersion in water based systems must be achieved easily with common stirrers without forming agglomerates or causing a viscosity build up. Usual inorganic dispersants, such as phosphate-based dispersants, are not able to solve this problem satisfactorily: their deflocculating effectiveness is limited by the fineness of the extenders used, and their poor temperature stability (degradation through hydrolysis) affects the long-term stability of paints. Ecodis™ P 30-30 has been especially developed to overcome these problems. It ensures the complete dispersion of extenders and inorganic pigments at high solids contents in systems showing medium to high PVC (Pigment Volume Concentration).

Ecodis™ P 50

ingredients

Ecodis™ P 50 is a sodium-neutralized polyacrylate dispersing agent for water-based systems. It ensures the complete dispersion of extenders and inorganic pigments at high solids contents in systems showing medium to high PVC (Pigment Volume Concentration).

Ecodis™ P 50 MB

ingredients

Ecodis™ P 50 MB is the Mass Balance version of the Ecodis™ P 50 with a Bio-attributed content of 100%. It allows a significant reduction of the product's carbon footprint compared to its fossil version. Ecodis™ P 50 MB achieves exactly the same performance as the Ecodis™ P 50 and can be readily used and implemented as a direct drop-in.

Ecodis™ P 500 HR

ingredients

Rationalisation of raw materials and simplification of the process are important issues for the paint makers. The design of Ecodis™ P 500 HR fully complies with these new requirements. Ecodis™ P 500 HR is a high effective acrylic dispersant which suppresses the need for further polyphosphate addition in order to control the hardness of the water used for the formulation. Ecodis™ P 500 HR is recommended for water-based systems showing a high PVC (Pigment Volumic Concentration), such as matt dispersion paints, thick film coatings, and fillers. Ecodis™ P 500 HR shows excellent dispersion performance towards natural and precipitated calcium carbonates. Using low concentrations of Ecodis™ P 500 HR, the deflocculation process is facilitated, compatibility with most of the binders is optimised, and storage stability and water resistance are improved.

Ecodis™ P 90

ingredients

Ecodis™ P 90 is a dispersion paint that is usually formulated with extenders. The dispersion of these extenders in water-based systems must be achieved easily with common stirrers, without forming agglomerates or causing a viscosity buildup. The usual inorganic dispersants do not adequately address this problem. Ecodis™ P 90 has been especially developed to overcome these problems. It ensures the complete dispersion of the extenders and the inorganic pigments at high solids contents and in systems with high P.V.C.

Ecodis™ P 90 MB

ingredients

Ecodis™ P 90 MB is the Mass Balance version of the Ecodis™ P 90 with a Bio-attributed content of 100%. It allows a significant reduction of the product's carbon footprint compared to its fossil version. Ecodis™ P 90 MB achieves exactly the same performance as the Ecodis™ P 90 and can be readily used and implemented as a direct drop-in.

Ecodis™ P 90-30

ingredients

Ecodis™ P 90-30 is a dispersion paint that is usually formulated with extenders. The dispersion of these extenders in water-based systems must be achieved easily with common stirrers, without forming agglomerates or causing a viscosity buildup. The usual inorganic dispersants do not adequately address this problem. Ecodis P 90-30 has been specifically developed to address these issues. It ensures the complete dispersion of the extenders and the inorganic pigments at high solids contents and in systems with high P.V.C. Besides dispersion paints, the main applications for Ecodis™ P 90-30 are in adhesives and wall paper pastes.

ECODIS™ PE 2737

ingredients

ECODIS™ PE 2737 is a dispersion paint typically formulated with fillers or extenders, such as the very fine calcium carbonates and clays now available. Their dispersion in water-based systems must be achieved easily with common stirrers without forming agglomerates or causing a viscosity buildup. Usual inorganic dispersants, such as phosphate-based dispersants, are not able to solve this problem satisfactorily: their deflocculating effectiveness is limited by the fineness of the extenders used, and their poor temperature stability (degradation through hydrolysis) affects the long-term stability of paints. Ecodis™ PE 2737 has been especially developed to ensure the complete dispersion of extenders and inorganic pigments at high solids contents in systems showing medium to high PVC (Pigment Volume Concentration).

ECODIS™ PE 283

ingredients

ECODIS™ PE 283 is a polycarboxylic acid in aqueous solution.

ECODIS™ PE 620

ingredients

ECODIS™ PE 620 is a polycarboxylic acid in aqueous solution.

ENCOR® 2100

ingredients

ENCOR® 2100 is a styrene acrylic emulsion formulated without alkylphenolethoxylates; it is ammonia-, solvent-, and plasticizer-free. ENCOR® 2100 is a convenient binder for low VOC and low odour interior and exterior paints and plasters, and for silicate-based coatings. According to its mechanical and hydrophobic properties, this binder is also suitable for nonwoven and technical textiles.

ENCOR® 2100 MB

ingredients

ENCOR® 2100 MB is a 95% bio-attributed version of ENCOR® 2100 through mass balance. Styrene acrylic emulsion formulated without alkylphenolethoxylates; it is ammonia-, solvent-, and plasticizer-free. ENCOR® 2100 MB is a convenient binder for low VOC and low odor interior and exterior paints and plasters, and for silicate-based coatings. According to its mechanical and hydrophobic properties, this binder is also suitable for non-woven and technical textiles.

ENCOR® 2105

ingredients

ENCOR® 2105 is a styrene acrylic emulsion formulated without alkylphenolethoxylates, solvent, or plasticizer. ENCOR® 2105 is a binder adapted to the formulation of low-VOC roof and flexible exterior coatings. It exhibits good durability thanks to its good and stable mechanical properties.

ENCOR® 2124

ingredients

ENCOR® 2124 is an acrylic emulsion for wood stains and high gloss pigmented DIY-lacquers with good blocking resistance, low water absorption, and excellent durability. ENCOR® 2124 is formulated without alkylphenolethoxylates.

ENCOR® 2138

ingredients

ENCOR® 2138 is a pure acrylic emulsion formulated with no alkylphenolethoxylates, ammonia, solvents, or formaldehyde. Based on ARKEMA's new technology for the development of high binding binders, ENCOR® 2138 is designed to be used in the formulations of low VOC plasters; interior paints exhibiting excellent wet scrub resistance; it is also perfectly adapted to exterior wall paints. Thanks to its very high binding power, ENCOR® 2138 allows for increasing the PVC of the paint without compromising its wet scrub resistance. Its specific structure is known to limit the migration of surfactants and other leaching species, limiting the "snail effect". Its low Minimum Film Formation Temperature allows the formulation of solvent-free and also coalescent-free paints. Applied at low temperature without any coalescing agent, high PVC paints based on ENCOR® 2138 keep their good wet scrub resistance.

ENCOR® 2140

ingredients

ENCOR® 2140 is a pure acrylic emulsion formulated without alkylphenol ethoxylates and formaldehyde. ENCOR® 2140 is to be used as a binder for high-quality exterior paints.

ENCOR® 2144

ingredients

ENCOR® 2144 is a fine particle size plasticizer and solvent-free pure acrylic emulsion formulated without alkylphenolethoxylates. ENCOR® 2144 is recommended for the formulation of solvent-free primers and groundings, e., adsorbent substrate and chalking paints. Its very low particle size ensures a good penetration into the porous substrate and consolidates it. ENCOR® 2144 should be diluted to 15 % solid content using water.

ENCOR® 2171

ingredients

ENCOR® 2171 is a hydroxylated self-crosslinking acrylic emulsion formulated without alkylphenolethoxylates, formaldehyde-free, designed for 1 pack and 2 pack industrial coatings for plastics, metals, and wood. Wood application: ENCOR® 2171 is suitable for the formulation of clear and pigmented sealers and satin or matte topcoats applied by spray and curtain coater. The warm aspect of wood coatings made with ENCOR® 2171 allows their use over either light or dark veneers in thin or thick layers. Plastics and metals application: ENCOR® 2171 is suitable for formulation of clear and pigmented high gloss topcoats applied by spray or brush.

ENCOR® 2222

ingredients

ENCOR® 2319 is a vinyl versatate dispersion formulated without alkylphenolethoxylates.ENCOR® 2222 is designed to be used as a binder for high-quality exterior paints.

ENCOR® 2319

ingredients

ENCOR® 2319 is a vinyl versatate dispersion formulated without alkylphenolethoxylates. Low viscosity binder with good wet scrub resistance in matte paints.

ENCOR® 2322

ingredients

ENCOR® 2322 is a universal binder formulated without alkylphenolethoxylates. ENCOR® 2322 is adapted to the formulation of interior and exterior plasters and wall paints.

ENCOR® 2326

ingredients

ENCOR® 2326 is a universal binder formulated without alkylphenolethoxylates. ENCOR® 2326 is a versatile product that allows the formulation of high-quality satin and matt wall paints. It offers an excellent balance of gloss and blocking resistance to satin paints and an improved wet scrub resistance to matt paints versus classical vinyl emulsions.

ENCOR® 2423

ingredients

ENCOR® 2423 is a highly viscous, versatile binder formulated without alkylphenolethoxylates. ENCOR® 2423 is a universal binder that is used in the formulation of indoor highly filled matt paints with excellent scrub resistance, as well as glossy wall paints, outdoor paints, thick textured coatings, and silicate-based coatings.

ENCOR® 2425

ingredients

ENCOR® 2425 is a versatile binder formulated without alkylphenolethoxylates or formaldehyde. ENCOR® 2425 is a universal binder that is used in the formulation of indoor highly filled matt paints with good scrub resistance, as well as glossy wall paints, outdoor paints, and thick textured coatings.

ENCOR® 2426

ingredients

ENCOR® 2426 is a versatile binder formulated without alkylphenolethoxylates, ammonia, or formaldehyde. ENCOR® 2426 is a universal binder that is used in the formulation of indoor highly filled matt paints with good scrub resistance, as well as glossy wall paints, outdoor paints, and thick textured coatings. According to its mechanical and hydrophobic properties, this binder is also suitable for nonwoven and technical textiles.

ENCOR® 2461

ingredients

ENCOR® 2461 is a cost-effective binder for elastomeric coatings.

ENCOR® 2505

ingredients

ENCOR® 2505 is a pure acrylic emulsion formulated without alkylphenolethoxylates. ENCOR® 2505 is particularly adapted to the formulation of paints and primers for mineral substrates. Its specific design ensures a very good resistance to alkaline media: its mechanical properties are stable and no embrittlement of the coating is observed upon ageing.

ENCOR® 2510

ingredients

ENCOR® 2510 is a pure acrylic emulsion formulated without alkylphenolethoxylates. ENCOR® 2510 is particularly adapted to the formulation of house paints and architectural universal primers. It is recommended for exterior wood coatings with excellent adhesion to wood and aged alkyds, and long-term durability. ENCOR® 2510 can also be used in non-yellowing varnishes for the protection of special decorative coatings, such as multi-coloured coatings.

ENCOR® 2514

ingredients

ENCOR® 2514 is an acrylic emulsion formulated without alkylphenolethoxylates. ENCOR® 2514 is recommended for the formulation of solvent-free primers and groundings, e.g., adsorbent substrate and chalking paints. Its very low particle size ensures a good penetration into the substrate, enabling it to consolidate it. ENCOR® 2514 should be diluted to 15 % solid content using water.

ENCOR® 2710

ingredients

ENCOR® 2710 is a low MFFT pure acrylic emulsion formulated without alkylphenoltehoxylates or formaldehyde. ENCOR® 2710 is designed for the formulation of stain-blocking paints and primers for wood and walls. Due to its large adhesion profile, ENCOR® 2710 is also well adapted to the formulations of multi-substrate architectural primers and renovation wall paints. Its specific composition ensures very good stain blocking properties without the use of zinc oxide: therefore it is easy to formulate stable coatings. To avoid the extraction of watersoluble colored species from the substrate, it is recommended not to use too hydrophilic additives.

ENCOR® 2711

ingredients

ENCOR® 2711 is used as a binder for wood primers and wall paints with good stain-blocking properties. It can be formulated with or without zinc oxide. ENCOR® 2711 is formulated without alkylphenolethoxylates.

ENCOR® 2721

ingredients

ENCOR® 2721 is a self-crosslinking styrene acrylic binder with high Tg for industrial woodfinishing applications. Good sandability, alkali, and chemical resistance.

ENCOR® 2722

ingredients

ENCOR® 2722 is an acrylic emulsion with excellent tannin blocking properties and good sandability. It is recommended for use in binders for tannin and stain blocking primers over wood, low VOC decorative coatings, and industrial wood finishing applications.

ENCOR® 2741

ingredients

ENCOR® 2741 is a pure acrylic emulsion formulated without alkylphenolethoxylates. ENCOR® 2741 is adapted to the formulation of satin and glossy interior wall coatings and high-quality exterior paints.

ENCOR® 2787

ingredients

ENCOR® 2787 is a modified hydrophobic pure acrylic binder formulated without alkylphenolethoxylates and formaldehyde releaser. ENCOR® 2787 is a high-performance emulsion that demonstrates outstanding water resistance and hydrophobicity. It is particularly adapted to the formulation of premium paints for exterior masonry with excellent durability and adhesion. ENCOR® 2787 stands out due to its wide range of formulations. It is well adapted to interior walls paints with an excellent stain resistance/washabilty, durable wood coatings and low whitening mosaic plasters.

ENCOR® 2793

ingredients

ENCOR® 2793 is a functionalized pure acrylics binder for multi-substrate primer and paints. It is formulated without alkylphenolethoxylates and is formaldehyde releaser free. It has excellent adhesion on wood, concrete, ceramic, plastics, etc. It is outstanding for stain/tannin blocking and prevents knots in wood from bleeding/blistering. It is easy to formulate in many applications, such as multisubstrate primer, wall paints, wood lacquers, stain and tannin blocking primer or two coat paints.

ENCOR® 2797

ingredients

ENCOR® 2797 is a pure acrylic binder formulated without alkylphenolethoxylates and formaldehyde releaser. ENCOR 2797 is particularly adapted for the formulation of paints for exterior masonry, featuring a specific design to ensure excellent water and alkali resistance. ENCOR® 2797 is suitable for wall and wood formulation, interior and exterior, with excellent performance for stain resistance.

ENCOR® 282

ingredients

ENCOR® 282 latex represents the next generation of general purpose vinyl acetate/ethylene (VAE) binder for architectural coatings, combining outstanding end-use performance with the composition and formulation latitude needed for use in more environmentally-friendly coatings.

ENCOR® 309

ingredients

ENCOR® 309 is a high molecular weight vinyl-acrylic latex designed for architectural coatings where high scrub resistance and exterior durability are of primary importance.

ENCOR® 310

ingredients

ENCOR® 310 is a high-performance binder with excellent touch-up and scrub resistance in low VOC flat to semigloss architectural coatings.

ENCOR® 317

ingredients

ENCOR® 317 is a high performance, low VOC-capable vinyl acrylic binder for interior flat to semigloss coatings that has good touch-up properties and TiO2 efficiency, and gives scrub resistant, washable films.

ENCOR® 3560

ingredients

ENCOR® 3560 is a high-solids binder designed for patch and repair applications, as well as tape joint compounds.

ENCOR® 357

ingredients

ENCOR® 357 is a general-purpose binder that offers broad formulating latitude and improved block resistance compared to standard vinyl-based latexes.

ENCOR® 367

ingredients

ENCOR® 367 is a general-purpose binder that offers excellent stability, including the capability of making stable, one-package intumescent paints.

ENCOR® 461

ingredients

ENCOR® 461 is a styrene acrylic latex with alkyd-like rheology and gloss properties that has excellent adhesion to a variety of substrates.

ENCOR® 471

ingredients

ENCOR® 471 is a high Tg styrene acrylic latex with alkyd-like rheology and gloss properties.

ENCOR® 481

ingredients

ENCOR® 481 is a low VOC-capable styrene acrylic latex with alkyd-like rheology and gloss properties.

ENCOR® 5116

ingredients

ENCOR® 5116 is a low VOC, high solids, cement-compatible styrene-acrylic latex. This product is free from coalescing agents, plasticizers, and APE surfactants. ENCOR® 5116 is a binder specifically designed for the formulation of flexible and waterproof two-component cement-based membranes, characterised by low surface tackiness. This product also finds application in the formulation of repairing mortars as well as ceramic tile adhesives and sealants. Thanks to the low VOC content and the absence of ammonia development during the mixing and setting phases, this product is particularly suggested for indoor applications.

ENCOR® 602

ingredients

ENCOR® 602 is for multi-substrate exterior deco coating end uses, low VOC coatings (zero – 50g/l VOC). It is suitable for flat to gloss formulations and offers excellent properties in critical deep tint base formulations.

ENCOR® 627

ingredients

ENCOR® 627 is a binder that effectively blocks stains from substrates that tend to exude tannins, and is effective in stain-blocking primers, masonry primers, and wood stains.

ENCOR® 631

ingredients

ENCOR® 631 is a low-VOC capable binder for interior and exterior architectural coatings that can be formulated over a wide PVC range, from flat to high gloss.

ENCOR® 636

ingredients

ENCOR® 636 is a binder that offers excellent gloss development, adhesion on both wet and dry substrates, and grain crack resistance.

ENCOR® 650

ingredients

ENCOR® 650 is a 100% acrylic resin at 50% solids content, designed for exterior architectural coating applications. ENCOR® 650 offers the formulation of cost-effective coatings with grain crack resistance, color retention, efflorescence resistance, and stain resistance. ENCOR® 650 acrylic meets EnVia® standards. It is produced without APEO, benzophenone, formaldehyde or PFAS and is low VOC capable (0-50 g/L).

ENCOR® 651

ingredients

ENCOR® 651 is a binder offering excellent overall performance and durability in athletic surface coatings.

ENCOR® 657

ingredients

ENCOR® 657 is a high solids binder that can be formulated into coatings for masonry, interior wall paints, and exterior architectural coatings, which balance cost and performance.

ENCOR® DC 3881

ingredients

ENCOR® DC 3881 is a 100% acrylic latex recommended for dust control and soil stabilization applications.

ENCOR® DL 215

ingredients

ENCOR® DL 215 is a binder uniquely suited for use in primer sealer formulations.

ENCOR® DL 313

ingredients

ENCOR® DL 313 is a binder for primer sealers that require moisture vapor barrier properties, alkali resistance, and adhesion to galvanized metals.

ENCOR® DT 211

ingredients

ENCOR® DT 211 is a fast-dry binder for traffic markings applied at standard line thickness, typically 15 mils wet.

ENCOR® Flex 187

ingredients

ENCOR® Flex 187 is a high solids binder designed for high-performance elastomeric roof and wall coatings with excellent dirt pick-up resistance.

ENCOR® FLEX 2462

ingredients

ENCOR® FLEX 2462 is a styrene-acrylic binder designed for cost-effective elastomeric roof and wall coatings with enhanced dirt pick-up resistance.

GELKYD® 320 WD 50

ingredients

GELKYD® 320 WD 50 is a strong gel polyamide modified thixotropic alkyd for use in all types of decorative coatings. It has a reduced odour, is to be used as a co-binder, and exhibits a very rapid recovery of structure after shearing. GELKYD® 320 WD 50 has been designed for use in smooth or stippled semi-gloss paints, depending on the choice of the Newtonian resin, as well as gloss paints and all undercoats.

GELKYD® 352 WD 54

ingredients

GELKYD® 352 WD 54 is a strong gel polyamide modified thixotropic alkyd for use in all types of decorative coatings. The resin is supplied in low aromatic white spirit to enable the formulation of coatings that do not require adverse environmental labelling. GELKYD® 352 WD 54 has been developed for use in the formulation of high-quality decorative interior and exterior finishes. When blended with suitable alkyds, GELKYD® 352 WD 54 can be used to produce 2010-compliant coatings with a wide range of structures, from strong gel to creamy consistency. GELKYD® 352 WD 54 has no adverse effect on drying, and as it is very clear, it is especially suitable for dark shade paints.

GELKYD® 367 WD 65

ingredients

GELKYD® 367 WD 65 is a medium gel polyamide modified thixotropic alkyd for use in all types of decorative coatings. The resin is supplied in low aromatic white spirit to enable the formulation of coatings that do not require adverse environmental labelling. GELKYD® 367 WD 65 is especially suitable for the formulation of thixotropic paints that meet the 2010 VOC requirements of European Directive 2004/42/C and has been developed for use in the formulation of high-quality decorative interior and exterior finishes. When blended with suitable alkyds, GELKYD® 367 WD 65 can be used to produce coatings with a wide range of structures, from medium gel to creamy consistency.

GELKYD® 4635 WD 51

ingredients

GELKYD® 4635 WD 51 is a soft gel polyamide modified thixotropic alkyd for use in all types of decorative coatings. It has a reduced odor and is to be used as a co-binder for medium and long-oil alkyd resins. As it is a highly condensed resin, it prevents the formulation from penetrating into porous substrates. It is very efficient for wetting pigments and fillers. GELKYD® 4635 WD 51 has been designed for use in matt and satin-finish paints.

GELKYD® 4648 WD 80

ingredients

GELKYD® 4648 WD 80 is a high solids polyamide modified thixotropic alkyd for use in all types of decorative coatings. GELKYD® 4648 WD 80 is especially suitable for formulating thixotropic paints that meet the 2010 VOC limits set in European Directive 2004/42/EC. Formulated as the sole binder, it allows the formulation of paints with a VOC lower than 300 g/l. Supplied in low aromatic white spirit, GELKYD® 4648 WD 80 enables the formulation of coatings that do not require adverse environmental labelling and has been developed for use in the formulation of high quality decorative interior and exterior finishes. When blended with suitable high solids alkyds, GELKYD® 4648 WD 80 can be used to produce media with a wide range of structures, from strong gel to creamy consistency, depending on the mixing ratio.

Viscoatex™ 560

ingredients

VISCOATEX™ 560 is a formaldehyde-free, APEO-free, Heavy metal-free, and solvent-free non-associative thickener designed for use in adhesives, paints, sealants, and mastics. VISCOATEX™ 560 imparts robustness versus variations of ingredient s such as latex type, surfactant, and co-solvent.

VISCOATEX™ 630

ingredients

VISCOATEX™ 630 is a formaldehyde-free, APEO-free, Heavy metal-free, and Solvent-free non-associative thickener designed for use in adhesives, paints, sealants, and mastics. VISCOATEX™ 630 imparts robustness versus variations of ingredient s such as latex type, surfactant, and co-solvent.

FOR MATERIAL SUPPLIERS

Put your materials in front of formulators.

Give product developers the specs, certifications, and sample path they need to shortlist your grades.

Talk to our team
Formulation scientist ready to help suppliers reach product developers