Where it is used
Home / Paint & Coatings / ingredients
Paint & Coatings
Additive TI
Additive TI is a reactive monofunctional isocyanate of low viscosity which reacts with water generating an inert amide. It eliminates slight parts of humidity and prevents moisture related problems in the formulation of polyurethane coatings. Additive TI is used for dehydration of solvents, fillers, pigments and bituminous tars. It rapidly reacts with water and generates carbon dioxide and toluenesulfonamide which is generally inert towards further reaction with alkyl and aryl isocyanates, and is usually soluble in common coating solvents. This product does not cause further film yellowing.
Documents
No document is attached to this grade yet.
Availability
OMG Borchers GmbH publishes documents in the marked regions.
Supplier details
OMG Borchers GmbH lists this grade in the Chemicals DB directory.
Also from OMG Borchers GmbH
21% COBALT HYDROXY TEN-CEM
21% COBALT HYDROXY TEN-CEM is a sacrificial drier in paste form. lt is used for drier stabilization in solvent-containing paint systems which dry by oxidation. This product takes effect in a controlled manner in step with the decomposition of the drier, but does not affect initial drying of the paint system and has no adverse effect on the film properties of the paint.
Ascinin® Anti Skin 0444
Ascinin® Anti Skin 0444 is a new anti-skinning agent for solventborne coating systems, printing inks and pigment pastes as well as VOC-reduced and High-Solids-paints based on alkyds, epoxy esters and other oxidatively drying binders. It contains a special combination of active ingredients with a high anti-oxidative potential. This product contains no oximes and phenolics and therefore should be a non-hazardous substitution for other commercial phenolic and oximic antioxidants. Due to the chemical basis of Ascinin® Anti Skin 0444 the specific disadvantages of other antioxidants -such as the strong drying retardation of phenolics or the toxicologic potential of oximic compounds - could be avoided.
Ascinin® Anti Skin 0445
Ascinin® Anti Skin 0445 is a new anti-skinning agent for solventborne and waterborne oxidatively cured drying coating systems. It contains a special combination of active ingredients with a high anti-oxidative potential. However, it contains no oximes and phenolics and therefore should be a non-hazardous substitution for other commercial phenolic and oximic antioxidants.
Ascinin® P
Ascinin® P is a 40 % solution of a substituted phenol in xylene and n-butanol. It is used as an
