Where it is used
Home / Paint & Coatings / ingredients
Paint & Coatings
Additive OF
Additive OF is a clear liquid with low viscosity, which is used to eliminate moisture in solventborne polyurethane coatings. It is used to eliminate the moisture in two-component polyurethane systems through chemical reaction. This product is generally compatible with polyol and isocyanate products. However, storage stability is not assured in all combinations. Its suitability for individual applications must be tested carefully. It is suitable for solventborne polyurethane coatings and can be added both to the polyol component and to the isocyanate component.
Documents
No document is attached to this grade yet.
Availability
OMG Borchers GmbH publishes documents in the marked regions.
Supplier details
OMG Borchers GmbH lists this grade in the Chemicals DB directory.
Also from OMG Borchers GmbH
21% COBALT HYDROXY TEN-CEM
21% COBALT HYDROXY TEN-CEM is a sacrificial drier in paste form. lt is used for drier stabilization in solvent-containing paint systems which dry by oxidation. This product takes effect in a controlled manner in step with the decomposition of the drier, but does not affect initial drying of the paint system and has no adverse effect on the film properties of the paint.
Ascinin® Anti Skin 0444
Ascinin® Anti Skin 0444 is a new anti-skinning agent for solventborne coating systems, printing inks and pigment pastes as well as VOC-reduced and High-Solids-paints based on alkyds, epoxy esters and other oxidatively drying binders. It contains a special combination of active ingredients with a high anti-oxidative potential. This product contains no oximes and phenolics and therefore should be a non-hazardous substitution for other commercial phenolic and oximic antioxidants. Due to the chemical basis of Ascinin® Anti Skin 0444 the specific disadvantages of other antioxidants -such as the strong drying retardation of phenolics or the toxicologic potential of oximic compounds - could be avoided.
Ascinin® Anti Skin 0445
Ascinin® Anti Skin 0445 is a new anti-skinning agent for solventborne and waterborne oxidatively cured drying coating systems. It contains a special combination of active ingredients with a high anti-oxidative potential. However, it contains no oximes and phenolics and therefore should be a non-hazardous substitution for other commercial phenolic and oximic antioxidants.
Ascinin® P
Ascinin® P is a 40 % solution of a substituted phenol in xylene and n-butanol. It is used as an
