Where it is used
Home / Paint & Coatings / ingredients
Paint & Coatings
Borchi® Gel LW 44 is a non-ionic, polyurethane-based thickener glycol ether-free, VOC-free according to the European Directives 1999/13/EC and 2004/42/EG. It is manufactured using aliphatic isocyanates; it has thus no negative influence on yellowing and chalking of coating film. Even small amounts of Borchi® Gel LW 44 bring about significant thickening of the aqueous phase. The resulting liquid is pseudoplastic, i.e. its viscosity is inversely proportional to its shear rate. Borchi® Gel LW 44 is therefore particularly suitable for low-viscosity applications such as spraying and dip-coating of waterborne and water-emulsifiable paint systems (finishing paints and primers), aqueous two-component polyurethane-based systems and two-component epoxy systems and polyester systems. lt can also be used for copolymer dispersions depending on the requirements profile. Particularly advantageous in this context is its effect on viscosity under low-shear conditions.
No document is attached to this grade yet.
OMG Borchers GmbH publishes documents in the marked regions.
OMG Borchers GmbH lists this grade in the Chemicals DB directory.
21% COBALT HYDROXY TEN-CEM is a sacrificial drier in paste form. lt is used for drier stabilization in solvent-containing paint systems which dry by oxidation. This product takes effect in a controlled manner in step with the decomposition of the drier, but does not affect initial drying of the paint system and has no adverse effect on the film properties of the paint.
Ascinin® Anti Skin 0444 is a new anti-skinning agent for solventborne coating systems, printing inks and pigment pastes as well as VOC-reduced and High-Solids-paints based on alkyds, epoxy esters and other oxidatively drying binders. It contains a special combination of active ingredients with a high anti-oxidative potential. This product contains no oximes and phenolics and therefore should be a non-hazardous substitution for other commercial phenolic and oximic antioxidants. Due to the chemical basis of Ascinin® Anti Skin 0444 the specific disadvantages of other antioxidants -such as the strong drying retardation of phenolics or the toxicologic potential of oximic compounds - could be avoided.
Ascinin® Anti Skin 0445 is a new anti-skinning agent for solventborne and waterborne oxidatively cured drying coating systems. It contains a special combination of active ingredients with a high anti-oxidative potential. However, it contains no oximes and phenolics and therefore should be a non-hazardous substitution for other commercial phenolic and oximic antioxidants.
Ascinin® P is a 40 % solution of a substituted phenol in xylene and n-butanol. It is used as an