Where it is used
Home / Paint & Coatings / ingredients
Paint & Coatings
GENOCURE* LTM
GENOCURE* LTM is a liquid photoinitiator blend for UV-curable inks, coatings and adhesives. It has good absorption between 350 and 400 nm; therefore it provides good through cure in highly pigmented white systems. This product is typically used in non yellowing wood coatings, non yellowing coatings for plastics, non yellowing screen and decor varnishes, laminating adhesives and pressure sensitive adhesives.
Documents
No document is attached to this grade yet.
Availability
Rahn AG publishes documents in the marked regions.
Also from Rahn AG
Printed Electronics Product Flash
Printed electronics is the broad term for a relatively new technology that defines the printing of electronics on common substrates such as paper, plastic, and textile using standard printing processes. The technology is believed to be one of the fastest growing in the world with an estimated USD 300 billion dollar market potential. Common press equipment used in the graphics arts industry, such as screen printing, flexography, gravure, ink-jet and offset lithography are employed.
ACMO
ACMO is an acryloyl morpholine. It is a resin for radically curable inks, coatings and adhesives. The product can be described as having low odor, good abrasion and solvent resistance, water soluble and good adhesion properties. The product improves the adhesion onto various substrates such as PVC, polyolefines, polyester and polystyrene. ACMO can be applied to the following applications: screen inks and varnishes; plastic coatings; laminating adhesives; printed circuit boards; and industrial coatings.
GENOCURE* BAPO
GENOCURE* BAPO is typically used in concentrations from 0.1 to 1.5%. In white pigmented inks and coatings, it is often used in combination with GENOCURE CPK. This product is a phosphine oxide photoinitiator for UV-curable inks, coatings and adhesives. Due to the strong absorption at 370nm GENOCURE* BAPO shows excellent through cure in pigmented systems.
GENOCURE* BDK
GENOCURE* BDK is a benzildimethylketal. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). This product is typically used in offset inks and varnishes, printed circuit boards, glassfiber coating, wood and industrial coating and photo polymers and printing plates.
