Paint & Coatings

Aradur® 3984 Epoxy Curing Agent

Aradur® 3984 epoxy curing agent is a waterborne, modified aliphatic amine curing agent designed for use in formulating two-component ambient, as well as heat cured, coatings. It is free of organic solvents and is supplied as 80% solids in water. It can be diluted in water; however at dilutions less than ~35% solids the solutions become milky.

Supplier profile

Documents

No document is attached to this grade yet.

Where it is used

Availability

Huntsman Advanced Materials 亨斯迈先进材料 publishes documents in the marked regions.

Supplier details

Huntsman Advanced Materials 亨斯迈先进材料 lists this grade in the Chemicals DB directory.

More grades from Huntsman Advanced Materials 亨斯迈先进材料

Also from Huntsman Advanced Materials 亨斯迈先进材料

Waterborne Clear Sealer (Formulation #EF-71)

This waterborne epoxy sealer offers a high clarity, high gloss finish with rapid cure and hardness development for use on stained concrete surfaces. It also has great adhesion to concrete, good stain resistance. Other advantages include its visible end of pot-life (by viscosity increase), low odor and low VOC content for compliance in most areas of the United States.

Waterborne, Direct to Metal Topcoat (Formulation #MF-385)

MF 385 is based on Aradur® 3986 waterborne curing agent and Araldite® PZ 3961-1 waterborne epoxy emulsion. This corrosion resistant DTM/topcoat offers good application properties, a long recoat window, very good gloss and UV stability and good chemical resistance. It has low volatile organic compound (VOC) content and is free of hazardous air pollutants and heavy metals.

WB DIY Floor Coating (Formulation #EF-97)

Formulation EF-97 is designed for use on suitably prepared bare or primed concrete floors. The formula offers a long pot life and a long open (“wet edge”) time, making it ideal for do-it-yourself (DIY) coating applications. The coating also offers a high gloss finish and good gloss stability over its pot life, good development of hardness, good abrasion resistance and excellent adhesion to dry or damp concrete.

Breathable WB Low VOC Primer (Formulation #EF-78)

This “breathable” concrete primer offers low VOC content, rapid hardness development, and long open “wet” time. Its excellent adhesion to damp concrete and “green” concrete, and high permeability to moisture (compared to a 100% solid or solvent based primer) makes it an ideal primer for “breathable” epoxy flooring systems applied to concrete substrates.