Where it is used
Home / Paint & Coatings / ingredients
Paint & Coatings
EtnaFoam OB-N 300 is a 100% active, non-silicone anti-foaming agent that is applicable to textile and associated processing. EtnaFoam OB-N 300 was designed as an economical replacement where the use of silicone anti-foaming agents is objectionable. The product contains twice the active amount of EBSA and can typically be used at half the level to reduce oil content in the bath.The selection and proper balance of emulsifiers provides stability of this product over the entire temperature range normally employed in the dyeing of both natural and synthetic fibers. The addition of 1/8 - 1/4% based upon the weight of goods, is generally sufficient to eliminate troublesome foam. As in all anti-foaming agents, care should be taken to avoid excessive levels to eliminate possible dyeing problems.
No document is attached to this grade yet.
Ascent Chemicals publishes documents in the marked regions.
Ascent Chemicals lists this grade in the Chemicals DB directory.
EtnaFoam 41B is a filled silicone defoamer compound based on a mid-range viscosity Dimethyl silicone Fluid. The Silica is hydrophobized in a catalyzed reaction. EtnaFoam 41B is an effective defoamer when emulsified and introduced into aqueous systems. EtnaFoam 41B can be used as a base material to make more dilute products for general use. When formulating with 41B it is important to blend it properly into a pre-thickened solution with low shear with proper re-adjustment to the proper level of biocide to prevent bacteria.
EtnaFoam 41M-EM is 100% active silicone compound with a built-in emulsifier package. This 100% active silicone defoamer leverages silicone's superior foam control properties, providing long-lasting performance in industrial applications. The built-in emulsifier package ensures efficient dispersion and stability, allowing the silicone to spread effectively in both aqueous and non-aqueous systems for optimal defoaming action.
EtnaFoam 700 N is a 100% active, non-silicone antifoaming agent composed of EBSA in naphthenic oil. Versatile and economical, it serves as a base for custom defoamers or as a direct solution for brown stock defoaming in paper manufacturing. Ideal for systems where silicone antifoams fall short or unsuitable, its low surface activity and lack of emulsifiers minimize process interference while ensuring reliable foam control. EntaFoam 700 N is compliant with FDA regulations for indirect food contact, providing reliable performance for regulated industries.
EtnaFaom 700 S is a 100% active, non-silicone antifoaming agent composed of EBSA in paraffinic oil. Versatile and economical, it serves as a base for custom defoamers or as a direct solution for brown stock defoaming in paper manufacturing. Ideal for systems where silicone antifoams fall short or unsuitable, its low surface activity and lack of emulsifiers minimize process interference while ensuring reliable foam control. EtnaFoam 700 S is compliant with FDA regulations for indirect food contact, providing reliable performance for regulated industries.