Where it is used
Home / Paint & Coatings / ingredients
Paint & Coatings
EtnaFoam EBSA
EtnaFoam EBSA is a 100% active ethylene bis stearamide available in approximately 15 pound ingots for use as a component in formulating non-silicone defoamers in mineral oil suspension. The product is readily soluble in all forms of mineral oil, including paraffinic, naphthenic and low boiling cuts such as mineral spirits and mineral seal oil. The product forms clear solutions in these oils at temperatures above 110°C, then begins to titer or flake out at lower temperatures. Typical ranges of concentration for EBSA 100 in oil are 1 to 10%, with the lower levels being used in textile applications and the higher levels being used in paper applications.
Documents
No document is attached to this grade yet.
Availability
Ascent Chemicals publishes documents in the marked regions.
Supplier details
Ascent Chemicals lists this grade in the Chemicals DB directory.
Also from Ascent Chemicals
EtnaFoam 41B
EtnaFoam 41B is a filled silicone defoamer compound based on a mid-range viscosity Dimethyl silicone Fluid. The Silica is hydrophobized in a catalyzed reaction. EtnaFoam 41B is an effective defoamer when emulsified and introduced into aqueous systems. EtnaFoam 41B can be used as a base material to make more dilute products for general use. When formulating with 41B it is important to blend it properly into a pre-thickened solution with low shear with proper re-adjustment to the proper level of biocide to prevent bacteria.
EtnaFoam 41M-EM
EtnaFoam 41M-EM is 100% active silicone compound with a built-in emulsifier package. This 100% active silicone defoamer leverages silicone's superior foam control properties, providing long-lasting performance in industrial applications. The built-in emulsifier package ensures efficient dispersion and stability, allowing the silicone to spread effectively in both aqueous and non-aqueous systems for optimal defoaming action.
EtnaFoam 700 N
EtnaFoam 700 N is a 100% active, non-silicone antifoaming agent composed of EBSA in naphthenic oil. Versatile and economical, it serves as a base for custom defoamers or as a direct solution for brown stock defoaming in paper manufacturing. Ideal for systems where silicone antifoams fall short or unsuitable, its low surface activity and lack of emulsifiers minimize process interference while ensuring reliable foam control. EntaFoam 700 N is compliant with FDA regulations for indirect food contact, providing reliable performance for regulated industries.
EtnaFoam 700 S
EtnaFaom 700 S is a 100% active, non-silicone antifoaming agent composed of EBSA in paraffinic oil. Versatile and economical, it serves as a base for custom defoamers or as a direct solution for brown stock defoaming in paper manufacturing. Ideal for systems where silicone antifoams fall short or unsuitable, its low surface activity and lack of emulsifiers minimize process interference while ensuring reliable foam control. EtnaFoam 700 S is compliant with FDA regulations for indirect food contact, providing reliable performance for regulated industries.
