Where it is used
Home / Paint & Coatings / ingredients
Paint & Coatings
BYK®-394
BYK®-394 is a silicone-free acrylic release agent with leveling properties. It is a solution of a polyacrylate copolymer. This product is recommended for solvent-borne and solvent-free baking and 2-pack PU coatings. The additive orientates to the paint surface and crosslinks into the polymer network due to its reactivity and is therefore fixed at the paint surface. BYK-394 reacts by primary OH-groups with binders and is used in solvent-borne systems. The additive reacts with the following binders: 2-pack Polyurethane, Alkyd-Melamine, Polyester-Melamine, Acrylic-Melamine, AcrylicEpoxy combinations. This additive improves leveling and gloss. It produces a long wave effect and prevents cratering without influence on surface tension (silicone-free). BYK-394 is thermally stable.
Documents
No document is attached to this grade yet.
Availability
BYK 毕克 publishes documents in the marked regions.
Also from BYK 毕克
ANTI-TERRA®-203
ANTI-TERRA®-203 is a solution of an alkylammonium salt of a polycarboxylic acid. This product is suitable for medium to low polar solvent-borne and solvent-free coating systems. It causes an increase in thixotropy. In highly filled systems, the sagging tendency is reduced; in addition, no negative influence on the water sensitivity of the paint film has been observed. When formulated into anti-corrosion primers, the protective properties are enhanced in many instances.
ANTI-TERRA®-204
ANTI-TERRA®-204 is a solution of a polycarboxylic acid salt of polyamine amides. In comparison to ANTI-TERRA-203, ANTI-TERRA-204 can additionally be used in non-polar systems and is compatible with white spirits. The lower the polarity the more the thixotropy is increased. The preferred binders are long, medium and short oil alkyds, PVC-copolymers, chlorinated rubber and epoxy. Even in "low-filled“ systems, the sagging tendency is reduced; in addition, no negative influence on the water sensitivity of the paint film has been observed. When formulated into anticorrosion primers, the protective properties are enhanced in many instances.
ANTI-TERRA®-205
ANTI-TERRA®-205 is a high molecular weight wetting and dispersing additives for solvent-borne systems. Solution of a polycarboxylic acid salt of polyamine amides.
ANTI-TERRA®-250
ANTI-TERRA®-250 is a solution of an alkylolammonium salt of a high molecular weight acidic polymer. It is used in aqueous systems and provides an increase in thixotropy and prevents hard settling of pigments. Due to controlled flocculation mechanism, the use of ANTI-TERRA-250 may lead to a minor gloss reduction.
