Where it is used
Home / Paint & Coatings / ingredients
Paint & Coatings
DISPERBYK®-110 is a wetting and dispersing additive for solvent-borne systems. It is composed of a solution of a copolymer with acidic groups. This product is suitable for stabilizing inorganic pigments, especially titanium dioxide, and strongly reduces millbase viscosity. Because of its anionic character, it is ideal for acid-catalyzed systems (such as coil coatings). It reduces haze in inorganic pigmented coatings when application occurs by electrostatic spraying. A combination with pigments stabilized by the DISPERBYK-160 family (see Data Sheet W200) is possible without any problems.
No document is attached to this grade yet.
BYK 毕克 publishes documents in the marked regions.
ANTI-TERRA®-203 is a solution of an alkylammonium salt of a polycarboxylic acid. This product is suitable for medium to low polar solvent-borne and solvent-free coating systems. It causes an increase in thixotropy. In highly filled systems, the sagging tendency is reduced; in addition, no negative influence on the water sensitivity of the paint film has been observed. When formulated into anti-corrosion primers, the protective properties are enhanced in many instances.
ANTI-TERRA®-204 is a solution of a polycarboxylic acid salt of polyamine amides. In comparison to ANTI-TERRA-203, ANTI-TERRA-204 can additionally be used in non-polar systems and is compatible with white spirits. The lower the polarity the more the thixotropy is increased. The preferred binders are long, medium and short oil alkyds, PVC-copolymers, chlorinated rubber and epoxy. Even in "low-filled“ systems, the sagging tendency is reduced; in addition, no negative influence on the water sensitivity of the paint film has been observed. When formulated into anticorrosion primers, the protective properties are enhanced in many instances.
ANTI-TERRA®-205 is a high molecular weight wetting and dispersing additives for solvent-borne systems. Solution of a polycarboxylic acid salt of polyamine amides.
ANTI-TERRA®-250 is a solution of an alkylolammonium salt of a high molecular weight acidic polymer. It is used in aqueous systems and provides an increase in thixotropy and prevents hard settling of pigments. Due to controlled flocculation mechanism, the use of ANTI-TERRA-250 may lead to a minor gloss reduction.