Where it is used
Home / Paint & Coatings / ingredients
Paint & Coatings
DISPERBYK®-2013 is a solvent-free wetting and dispersing additive for 100% UV systems and solvent-borne and water-borne UV systems for printing inks and coatings. Based on its balanced product polarity and 100% delivery form, DISPERBYK-2013 achieves excellent stabilization, in particular in 100% UV systems and particularly of organic pigments and carbon black pigments. In so doing, this product has an impressive, effective viscosity-reducing effect, simultaneously reducing thixotropic flow behavior.
No document is attached to this grade yet.
BYK 毕克 publishes documents in the marked regions.
ANTI-TERRA®-203 is a solution of an alkylammonium salt of a polycarboxylic acid. This product is suitable for medium to low polar solvent-borne and solvent-free coating systems. It causes an increase in thixotropy. In highly filled systems, the sagging tendency is reduced; in addition, no negative influence on the water sensitivity of the paint film has been observed. When formulated into anti-corrosion primers, the protective properties are enhanced in many instances.
ANTI-TERRA®-204 is a solution of a polycarboxylic acid salt of polyamine amides. In comparison to ANTI-TERRA-203, ANTI-TERRA-204 can additionally be used in non-polar systems and is compatible with white spirits. The lower the polarity the more the thixotropy is increased. The preferred binders are long, medium and short oil alkyds, PVC-copolymers, chlorinated rubber and epoxy. Even in "low-filled“ systems, the sagging tendency is reduced; in addition, no negative influence on the water sensitivity of the paint film has been observed. When formulated into anticorrosion primers, the protective properties are enhanced in many instances.
ANTI-TERRA®-205 is a high molecular weight wetting and dispersing additives for solvent-borne systems. Solution of a polycarboxylic acid salt of polyamine amides.
ANTI-TERRA®-250 is a solution of an alkylolammonium salt of a high molecular weight acidic polymer. It is used in aqueous systems and provides an increase in thixotropy and prevents hard settling of pigments. Due to controlled flocculation mechanism, the use of ANTI-TERRA-250 may lead to a minor gloss reduction.