Where it is used
Home / Paint & Coatings / ingredients
Paint & Coatings
BYK®-310
BYK®-310 is a solution of a polyester modified polydimethylsiloxane. This product is a heat resistant silicone additive, i.e., in contrast to conventional (polyether modified) silicones, it shows no thermal decomposition at temperatures between 150°C/302°F and 230°C/446°F. Thus, upon the recoating baking systems, no loss in adhesion and no surface defects occur. (Note: The aforementioned defects can be caused by the decomposition products of conventional silicones at temperatures above 150°C/302°F.) The effective substance of BYK-310 is listed in title 21 CFR (food and drugs) § 175.300, Indirect Food Additives, Adhesives and Components of Coatings. The usage level may not exceed 0,1% (delivery form based on total formulation) and the film thickness may not exceed 12 µm.
Documents
No document is attached to this grade yet.
Availability
BYK 毕克 publishes documents in the marked regions.
Also from BYK 毕克
ANTI-TERRA®-203
ANTI-TERRA®-203 is a solution of an alkylammonium salt of a polycarboxylic acid. This product is suitable for medium to low polar solvent-borne and solvent-free coating systems. It causes an increase in thixotropy. In highly filled systems, the sagging tendency is reduced; in addition, no negative influence on the water sensitivity of the paint film has been observed. When formulated into anti-corrosion primers, the protective properties are enhanced in many instances.
ANTI-TERRA®-204
ANTI-TERRA®-204 is a solution of a polycarboxylic acid salt of polyamine amides. In comparison to ANTI-TERRA-203, ANTI-TERRA-204 can additionally be used in non-polar systems and is compatible with white spirits. The lower the polarity the more the thixotropy is increased. The preferred binders are long, medium and short oil alkyds, PVC-copolymers, chlorinated rubber and epoxy. Even in "low-filled“ systems, the sagging tendency is reduced; in addition, no negative influence on the water sensitivity of the paint film has been observed. When formulated into anticorrosion primers, the protective properties are enhanced in many instances.
ANTI-TERRA®-205
ANTI-TERRA®-205 is a high molecular weight wetting and dispersing additives for solvent-borne systems. Solution of a polycarboxylic acid salt of polyamine amides.
ANTI-TERRA®-250
ANTI-TERRA®-250 is a solution of an alkylolammonium salt of a high molecular weight acidic polymer. It is used in aqueous systems and provides an increase in thixotropy and prevents hard settling of pigments. Due to controlled flocculation mechanism, the use of ANTI-TERRA-250 may lead to a minor gloss reduction.
