Home / Household & Industrial Cleaners / Suppliers / Innospec Performance Chemicals Home Care and I&I

Household & Industrial Cleaners

Innospec Performance Chemicals Home Care and I&I

Innospec Performance Chemicals Home Care and I&I lists 145 grades in Household & Industrial Cleaners. The sheets saved on this site are below.

Listed grades145
Sheets here145
Formulas here0
HOUSEHOLD & INDUSTRIAL CLEANERS SUPPLIER Innospec Performance Chemicals Home Care and I&I

Grades from Innospec Performance Chemicals Home Care and I&I

Aquanate COT 20

ingredients

Aquanate COT 20 is a 20% active anionic surfactant that provides exceptional foam and viscosity building. It is supplied in a diluted liquid form designed specifically for the ease of handling. Aquanate COT 20 can be used as the primary surfactant at use levels up to 40% w/w where it provides extraordinary foam in a variety of detergency applications. It is compatible with non-ionic, anionic and amphoteric surfactants. Aquanate COT 20 is stable at broad pH conditions (3.0 – 11.0), making it appropriate for various home care applications.

Aquanate COT 30

ingredients

Aquanate COT 30 is a 30% active anionic surfactant that provides exceptional foam and viscosity building. It is sulfate free and can be used as a primary surfactant at use levels up to 30% where it provides extraordinary foam in a variety of detergency applications. It is compatible with non-ionic, anionic and amphoteric surfactants. Aquanate COT 30 is stable at broad pH conditions (3.0 – 11.0), making it appropriate for various home care applications.

Aquanate COT 75

ingredients

Aquanate COT 75 is a 75% active anionic surfactant powder form of Sodium Methyl Cocoyl Taurate. This sulfate free surfactant provides exceptional foam and viscosity building. It can be used as a primary surfactant at use levels up to 30% active where it provides extraordinary foam in a variety of detergency applications. It is compatible with non-ionic, anionic and amphoteric surfactants. Aquanate COT 75 is stable at broad pH conditions (3.0 – 11.0), making it appropriate for various home care applications.

Aquanate FK

ingredients

Aquanate FK is an extremely mild surfactant that can be used in formulations as a primary or secondary surfactant. Aquanate FK is ideally used where a dense, stable foam is desired. It provides excellent detergency with outstanding rinseability. Aquanate FK, when used in combination with other co-surfactants, will build highly viscous, salt thickened systems. Its excellent water solubility properties allow the formulator to produce crystal clear cleansing systems for home care applications.

Aquanate GLT

ingredients

Aquanate GLT is a naturally derived anionic surfactant produced from L-glutamic acid, a naturally occurring amino acid, and lauric acid. It is a mild surfactant that is readily biodegradable and can be used as the primary or secondary surfactant in a detergent system. Aquanate GLT produces excellent foam and detergency. This product is suitable for a variety of home care applications such as mild dish soap, hand soaps, surface care and laundry products. Stable between a pH of 4.0-10.0

Aquanate LQ

ingredients

Aquanate LQ is a 32% active liquid solution of sodium lauroyl methyl isethionate. This anionic surfactant is extremely mild and provides exceptional foaming. It is derived from natural/renewable resources that can be used in formulations as a primary or secondary surfactant. Aquanate LQ is ideally used where a dense, stable foam is desired. It provides good detergency with outstanding rinseability. Aquanate LQ, when used in combination with other co-surfactants, will build highly viscous, salt thickened systems. The excellent water solubility properties allow the formulator to produce crystal clear cleansing systems for home care applications. Aquanate LQ contains Sodium Benzoate as the preservative and Trisodium Ethylenediamine Disuccinate (Enviomet® C140) as the chelant.

Aquanate MOT 30

ingredients

Aquanate MOT 30 is a 30% active, mild anionic surfactant that delivers moderate foam over a broad pH range. Aquanate MOT 30 aids in building viscosity with other co-surfactants. The typical usage level is 2-15% w/w as the primary or secondary surfactant. It is compatible with non-ionic, anionic and amphoteric surfactants. Aquanate MOT 30 is stable at broad pH conditions (3.0 – 11.0), making it appropriate for various home care applications.

Aquanate SCI 85F

ingredients

Aquanate SCI 85F is a mild surfactant for use in cleansing products. Sodium Cocoyl Isethionate (SCI) is high foaming, nearly salt-free and is tolerant to hard water. Aquanate SCI 85F is supplied in easy to handle flake form which can be used in a variety of products where skin mildness and rich creamy lather are desired. The solid form of SCI is ideal for the formation of solid product formats.

Aquanate SCI-85P

ingredients

Aquanate SCI-85P is an anionic surfactant in powder form. Sodium Cocoyl Isethionate produces a dense lather that contributes to the overall foam stability of finished formulations. It is high foaming in both hard and soft water. Optimum pH range is 6 to 8, however the pH can be slightly higher for some solid formulations such as soap-based detergent bars. Usage levels range from 1-5% w/w in liquid formulations to 2-60% w/w in solid formats.

Aquanate XHL-BB

ingredients

Aquanate XHL-BB is a performance concentrate developed for economical, sulfate-free home care products. It is a high foaming, optimized surfactant combination, producing a crystal clear finished formula. This concentrate requires only the addition of water, fragrance and electrolyte for viscosity adjustments. Recommended use levels between 25% to 40%. Aquanate XHL-BB is preserved with sodium benzoate.

Aquanate XHL-SFSB

ingredients

Aquanate XHL-SFSB is a concentrated surfactant blend developed for use in sulfate-free home care applications. It is an optimized blend designed for ease of use in cleaning formulas. This concentrate only requires the addition of water for dilution and salt to thicken in order to develop a stable finished formulation. Recommended use level between 25% to 40%. Aquanate XHL-SFSB is preserved with sodium benzoate.

Aquanate XHL-UM

ingredients

Aquanate XHL-UM is a concentrated surfactant blend developed for use in home care applications where an ultra-mild formulation is desired. It is optimized for ease of use, being pourable, easy to mix and allows for cold processing. This concentrate only requires the addition of water for dilution, fragrance and electrolyte in order to develop a stable finished formulation. Recommended use level between 20% to 30%. Aquanate XHL-UM is preserved with sodium benzoate.

LAUREX® CS

ingredients

LAUREX® CS is a straight chain cetyl-stearyl alcohol, provided in flakes for ease of handling. It is a versatile wax that can be used to modify the consistency and feel of cosmetic creams and lotions for skin and hair care.

NANSA® HS 80 / NPF

ingredients

NANSA® HS 80 / NPF is sodium alkylbenzene sulphonate powder based on a predominately straight chain C10-13 alkylbenzene (dodecylbenzene). It is a high active anionic surfactant particularly suited to provide wetting, detergency and emulsification in a wide range of applications, including laundry detergents, surface cleaners and hygienic blocks. The physical form allows direct incorporation into powders, compressed tablets and blocks.

NANSA® HS 80/S

ingredients

NANSA® HS 80/S is dried sodium C10-13 alkylbenzene sulfonate. It is a high active anionic surfactant particularly suited to provide wetting, detergency and emulsification in a wide range of applications, including laundry detergents, surface cleaners and hygienic blocks. The physical form allows direct incorporation into powders, compressed tablets and blocks.

NANSA® HS 85 / NPF

ingredients

NANSA® HS 85 / NPF is sodium alkylbenzene sulphonate powder based on a predominately straight chain C10-13 alkylbenzene (dodecylbenzene). It is a high active anionic surfactant particularly suited to provide wetting, detergency and emulsification in a wide range of applications, including laundry detergents, surface cleaners and hygienic blocks. The physical form allows direct incorporation into powders, compressed tablets and blocks.

NANSA® HS 85 / S

ingredients

NANSA® HS 85 / S is dried sodium C10-13 alkylbenzene sulfonate. This product is a high active anionic surfactant particularly suited to provide wetting, detergency and emulsification in a wide range of applications, including laundry detergents, surface cleaners and hygienic blocks. The physical form allows direct incorporation into powders, compressed tablets and blocks.

NANSA® HS 90 / S

ingredients

NANSA ® HS 90 / S is a high active sodium alkyl benzene sulphonate based on a predominately straight chain alkylate. It is a high active anionic surfactant particularly suited to provide wetting, detergency and emulsification in a wide range of applications, including laundry detergents, surface cleaners and hygienic blocks. The physical form allows direct incorporation into powders, compressed tablets and blocks.

NANSA® HS 90 /NPF

ingredients

NANSA® HS 90 / NPF is a sodium alkyl benzene sulfonate powder based on a predominately straight chain alkylate. This product does not contain phosphate or magnesium. This product is a high active anionic surfactant particularly suited to provide wetting, detergency and emulsification in a wide range of applications, including laundry detergents, surface cleaners and hygienic blocks. The physical form allows direct incorporation into powders, compressed tablets and blocks.

NANSA® LSS 38 / AS

ingredients

NANSA ® LSS 38 / AS is an aqueous solution of sodium C14-16 alpha-olefin sulphonate. Alpha olefin sulfonates provide excellent foaming and detergency properties to a broad spectrum of formulations. They produce a high volume of stable and luxurious foam combining the benefits of alkyl ether sulfates and alkyl sulfates in a single product. In addition, alpha olefin sulfonates have excellent hard water and electrolyte tolerance and are stable in acidic conditions, making them ideal for use in all cleaning applications.

NANSA® LSS 38/U

ingredients

NANSA® LSS 38/U is an aqueous solution of sodium C14-16 alpha-olefin sulfonate. Alpha olefin sulfonates provide excellent foaming and detergency properties to a broad spectrum of formulations. They produce a high volume of stable foam combining the benefits of alkyl ether sulfates and alkyl sulfates in a single product. In addition, alpha olefin sulfonates have excellent hard water and electrolyte tolerance and are stable in acidic conditions, making them ideal for use in all cleaning applications.

NANSA® LSS 480 / H

ingredients

NANSA® LSS 480 / H is sodium C14 - 16 alpha-olefin sulfonate provided as the dried powder. Alpha olefin sulfonates provide excellent foaming and detergency properties to a broad spectrum of formulations. They produce a high volume of stable and luxurious foam combining the benefits of alkyl ether sulfates and alkyl sulfates in a single product. In addition, alpha olefin sulfonates have excellent hard water and electrolyte tolerance and are stable in acidic conditions, making them ideal for use in all cleaning applications. The powder form is particularly suitable for use in solid and highly concentrated formulations.

NANSA® LSS 495 / V

ingredients

NANSA® LSS 495 / V is adried Sodium C14 - 16 alpha-olefin sulfonate in needles form. Alpha olefin sulfonates provide excellent foaming and detergency properties to a broad spectrum of formulations. They produce a high volume of stable and luxurious foam combining the benefits of alkyl ether sulfates and alkyl sulfates in a single product. In addition, alpha olefin sulfonates have excellent hard water and electrolyte tolerance and are stable in acidic conditions, making them ideal for use in all cleaning applications. The dried form is suitable for use in solid and highly concentrated formulations.

NANSA® LSS 495/H

ingredients

NANSA® LSS 495 / H is sodium C14 - 16 alpha-olefin sulfonate provided as the dried powder. It provide excellent foaming and detergency properties to a broad spectrum of formulations. They produce a high volume of stable and luxurious foam combining the benefits of alkyl ether sulfates and alkyl sulfates in a single product. In addition, alpha olefin sulfonates have excellent hard water and electrolyte tolerance and are stable in acidic conditions, making them ideal for use in all cleaning applications. The powder form is particularly suitable for use in solid and highly concentrated formulations.

NANSA® PC 38 / F

ingredients

NANSA® PC 38/F is an aqueous solution of a potassium fatty acid soap. Fatty acid soaps are commonly used surfactants for their cleaning and degreasing properties, but they can also help to control foam, for example in laundry liquids for automatic machine wash and other detergents, reducing the requirement to add additional de-foaming agents. They are also frequently used in personal care products and this product is ideal for use in liquid formulations, such as hand soaps for dispensers, shower and bath products, etc.

NANSA® SS 55/I

ingredients

NANSA® SS 55/I is an aqueous solution of sodium C10-13 alkylbenzene sulfonate. It is a high active anionic surfactant particularly suited to provide wetting, detergency and emulsification in a wide range of applications. Compliance Highlights Unavailable

Natrlquest™ E30 (Personal Care Grade)

ingredients

Natrlquest™ E30 is a 38% Na3EDDS solution made from L-aspartic acid and is free from NTA, formaldehyde, cyanide and phosphorous. It is readily biodegradable under OECD guidelines. This product is an excellent chelator for transition metals especially in hard water systems and can be used in a range of applications, such as personal care, laundry, dish washing, and hard surface cleaners.

ELTESOL® PSC 40

ingredients

ELTESOL® PSC 40 is an aqueous solution of a sodium and potassium cumene sulphonate. It is formulated to give a lower crystallisation temperature Compliance Highlights Unavailable

ELTESOL® SC 40

ingredients

ELTESOL® SC 40 is an aqueous solution of a sodium cumene sulphonate. This product acts as a hydrotrope and may be used to increase the solubility of other compounds. In conjunction with non-ionic surfactants it will raise the cloud point of the solution allowing clear liquids to be obtained at higher temperatures, enabling additional control of the foaming characteristics and performance. It may also be used to reduce the viscosity of concentrated surfactants and formulations.

ELTESOL® SC 93

ingredients

ELTESOL ® SC 93 is a sodium cumene sulphonate powder. This product acts as a hydrotrope and may be used to increase the solubility of other compounds. In conjunction with non-ionic surfactants it will raise the cloud point of the solution allowing clear liquids to be obtained at higher temperatures, enabling additional control of the foaming characteristics and performance. It may also be used to reduce the viscosity of concentrated surfactants and formulations.

ELTESOL® SC Pellets

ingredients

ELTESOL® SC Pellets is sodium cumene sulphonate. This product acts as a hydrotrope and may be used to increase the solubility of other compounds. In conjunction with non-ionic surfactants it will raise the cloud point of the solution allowing clear liquids to be obtained at higher temperatures, enabling additional control of the foaming characteristics and performance. It may also be used to reduce the viscosity of concentrated surfactants and formulations.

ELTESOL® ST 90

ingredients

ELTESOL® ST 90 is a sodium toluene sulphonate in powder. This product acts as a hydrotrope and may be used to increase the solubility of other compounds. In conjunction with non-ionic surfactants it will raise the cloud point of the solution allowing clear liquids to be obtained at higher temperatures, enabling additional control of the foaming characteristics and performance. It may also be used to reduce the viscosity of concentrated surfactants and formulations.

ELTESOL® ST 93 Pellets

ingredients

ELTESOL® ST 93 Pellets is sodium toluene sulphonate. This product acts as a hydrotrope and may be used to increase the solubility of other compounds. In conjunction with non-ionic surfactants it will raise the cloud point of the solution allowing clear liquids to be obtained at higher temperatures, enabling additional control of the foaming characteristics and performance. It may also be used to reduce the viscosity of concentrated surfactants and formulations.

ELTESOL® SX 30

ingredients

ELTESOL® SX 30 is an aqueous solution of sodium xylene sulphonate. It is ideal for use in dishwash liquids and general purpose household cleaners. This product is an example of an hydrotrope, which when dissolved in water will assimilate molecules of other normally insoluble compounds. They, therefore, act as solubilisers, coupling agents and viscosity modifiers in liquid formulations

ELTESOL® SX 33

ingredients

ELTESOL® SX 33 is an aqueous solution of sodium xylene sulphonate. This product is an example of an hydrotrope, which when dissolved in water will assimilate molecules of other normally insoluble compounds. They, therefore, act as solubilisers, coupling agents and viscosity modifiers in liquid formulations. It is ideal for use in dishwashing liquids, general purpose cleaners, and liquid and powder detergetns.

ELTESOL® SX 40

ingredients

ELTESOL® ST 40 is an aqueous solution of sodium toluene sulphonate. This product is an example of an hydrotrope, which when dissolved in water will assimilate molecules of other normally insoluble compounds. They, therefore, act as solubilisers, coupling agents and viscosity modifiers in liquid formulations.

ELTESOL® SX 93

ingredients

ELTESOL ® SX 93 is a sodium xylene sulphonate powder. This product acts as a hydrotrope and may be used to increase the solubility of other compounds. In conjunction with non-ionic surfactants it will raise the cloud point of the solution allowing clear liquids to be obtained at higher temperatures, enabling additional control of the foaming characteristics and performance. It may also be used to reduce the viscosity of concentrated surfactants and formulations.

ELTESOL® SX Pellets

ingredients

ELTESOL® SX Pellets is sodium xylene sulphonate. This product acts as a hydrotrope and may be used to increase the solubility of other compounds. In conjunction with non-ionic surfactants it will raise the cloud point of the solution allowing clear liquids to be obtained at higher temperatures, enabling additional control of the foaming characteristics and performance. It may also be used to reduce the viscosity of concentrated surfactants and formulations.

EMPICOL® 0045 / B

ingredients

EMPICOL® 0045 / B is a dried powder of sodium lauryl sulfate. It is a versatile surfactant capable of producing a fine, creamy foam. It is also a good emulsifier and an excellent wetting agent, with good electrolyte tolerance, making it ideal for use as the primary surfactant in a range of cosmetic and detergent applications, such as shaving creams, laundry detergents and additives and toilet blocks.

EMPICOL® 0335 / X

ingredients

EMPICOL® 0335 / X is a sodium C10-C12 linear alkyl sulphate in aqueous solution. It can be used in Vegetable oil refinement, emulsion polymerisation and all applications where the use of short shain alkyl sulphate is required. Compliance Highlights Unavailable

EMPICOL® 0585 / A

ingredients

EMPICOL® 0585 / A is an aqueous solution of sodium 2-ethylhexyl sulfate. This product is mainly used as a wetting agent. Compliance Highlights Available

EMPICOL® 0585 / U

ingredients

EMPICOL ® 0585 / U is an aqueous solution of sodium 2-ethylhexyl sulfate. This product is mainly used as a wetting agent. Compliance Highlights Available

EMPICOL® 0775 / 55

ingredients

EMPICOL ® 0775 / 55 is a sodium alkyl sulphate based on C12-C18 alcohol. It is recommended for use as a primary surfactant in the manufacture of hand- cleaning pastes at a pH close to that of the skin. It is based on a carefully selected blend of coconut and tallow alcohols.

EMPICOL® AL 25 / EX

ingredients

EMPICOL® AL 25 / EX is an aqueous solution of ammonium lauryl sulfate. It has excellent foaming characteristics and it can be used to promote the formation of a creamy and luxurious lather in a wide variety of cosmetic products, such as shampoos, bath and shower gels and liquid soaps.

EMPICOL® AL 70

ingredients

EMPICOL® AL 70 is an aqueous solution of ammonium lauryl sulfate. It has excellent foaming characteristics and it can be used to promote the formation of a creamy and luxurious lather in a wide variety of cosmetic products, such as shampoos, bath and shower gels and liquid soaps.

EMPICOL® CBJ

ingredients

EMPICOL® CBJ is a concentrated aqueous solution of Laureth-11 Carboxylic Acid with a degree of carboxymethylation of ca. 90%. It is ideal for use in mild personal care products such as shampoos, shower gels, liquid soaps, foam baths and other low irritation formulations.

EMPICOL® CED 5

ingredients

EMPICOL® CED 5 is a concentrated aqueous solution of Laureth-5 Carboxylic Acid. As well as providing good foam, which is tolerant to water hardness, and emulsification, ether carboxylates exhibit superior mildness to many other surfactants, which makes them ideal in cosmetic formulations, such as shower gels, shampoos and liquid soaps.

EMPICOL® CED 5 / S

ingredients

EMPICOL® CED 5 / S is an aqueous solution of sodium laureth-5 carboxylate. As well as providing good foam, which is tolerant to water hardness, and emulsification, ether carboxylates exhibit superior mildness to many other surfactants, which makes them ideal in cosmetic formulations, such as shower gels, shampoos and liquid soaps.

EMPICOL® CVE

ingredients

EMPICOL® CVE is a concentrated aqueous solution of Capryleth-6 Carboxylic Acid. The specific properties of ether carboxylates make them versatile surfactants with applications in many industries. This product is particularly recommended for emulsification and solubilisation and especially where low or controlled foam is an advantage. This makes it ideal for surface cleaning applications in industrial, institutional and home environments. This product is compatible with nonionic and amphoteric surfactants, but may cause hydrolysis of some anionic surfactants, such as alkyl and alkyl ether sulfates, unless neutralised first.

EMPICOL® CZV / N

ingredients

EMPICOL® CZV / N is dried sodium coco sulfate in the form of needles. It is ideally suited for use as a foaming and wetting agent in oral care products and as an excipient in pharmaceuticals. It is manufactured specifically to meet the requirements of the monographs for sodium lauryl sulphate in the U.S. Pharmacopoeia (USP40/NF35) and European Pharmacopoeia 9th edition.

EMPICOL® EAC 70

ingredients

EMPICOL ® EAC 70 is an aqueous solution of a toiletry grade of ammonium lauryl ethoxy ( 3EO ) sulphate based on a narrow cut primary natural alcohol. This product is a versatile toiletry raw material which combines optimum performance with excellent foaming characteristics. It is used in the formulation of high quality shampoos, foam baths, shower products, liquid soaps, creams and lotions.

EMPICOL® EGC 70

ingredients

EMPICOL® EGC 70 is an aqueous solution of magnesium laureth sulfate at circa 70% based on a linear C12-14 alcohol. Magnesium laureth sulfates typically provide greater viscosity build and improved foaming characteristics over their sodium and ammonium equivalents. Therefore this product gives an excellent balance of performance with the improved mildness typically associated with higher degrees of ethoxylation.

EMPICOL® IDS X10

ingredients

EMPICOL® iDS X10 is a blend of low foam surfactants. This product is a concentrated blend of low foam surfactants, specifically designed to give excellent wetting and detergency in conjunction with a low volume of controlled foam. These properties make it ideal for the formulation of a variety of detergents, where excess foam is undesirable, such as hard surface cleaners, floor cleaners and fine fabrics detergents.

EMPICOL® iDS X50-13

ingredients

EMPICOL® iDS X50-13 is an optimised surfactant blends designed to provide efficient degreasing and wetting properties especially in I&I Applications. It is easy to dilute and stable at all the dilutions, chemically stable in strong acidic and alkaline conditions, compatible with oxidising agents, compatible with all types of surfactants both in extreme alkaline and acidic conditions, compatible with most common solvents, complexing agents and builders. It has medium foaming properties. Possible applications are Degreasers, Hard Surface Cleaners, Pre-Spotters, Vehicles Cleaners, and Carwash Detergents.

EMPICOL® iDS X50-19

ingredients

EMPICOL® iDS X50-19 is a concentrated blend of a cationic surfactant, a nonionic surfactant and a solvent. It is designed to provide efficient degreasing and wetting properties especially in I&I applications. It is easy to dilute and stable at all the dilutions, chemically stable in strong acidic and alkaline conditions, compatible with oxidising agents, compatible with all types of surfactants both in extreme alkaline and acidic conditions, compatible with most common solvents, complexing agents and builders. It has low foaming properties. Possible applications are Degreasers, Hard Surface Cleaners, Pre-Spotters, Vehicles Cleaners,

EMPICOL® iDS X50-23

ingredients

EMPICOL® iDS X50-23 is an optimised surfactant blends designed to provide efficient degreasing and wetting properties especially in I&I Applications. It is easy to dilute and stable at all the dilutions, chemically stable in strong acidic and alkaline conditions, compatible with oxidising agents, compatible with all types of surfactants both in extreme alkaline and acidic conditions, compatible with most common solvents, complexing agents and builders. It has medium foaming properties. Possible applications are Degreasers, Hard Surface Cleaners, Pre-Spotters, Vehicles Cleaners,

EMPICOL® LQ 33 / TX

ingredients

EMPICOL® LQ 33 / TX is an aqueous solution of toiletry grade of monoethanolamine lauryl sulphate solution based on a narrow cut primary natural alcohol. This product is a versatile toiletry raw material which combines optimum performance with excellent foaming characteristics. It is used in the formulation of high quality shampoos, foam baths, shower products, liquid soaps, creams and lotions, and childrens shampoo and bath products.

EMPICOL® LX / B

ingredients

EMPICOL® LX / B is a dried powder of sodium lauryl sulfate. It is a versatile surfactant capable of producing a fine, creamy foam. It is also a good emulsifier and an excellent wetting agent, with good electrolyte tolerance, making it ideal for use as the primary surfactant in a range of cosmetic and detergent applications, such as shaving creams, laundry detergents and additives and toilet blocks.

EMPICOL® LX / B / MB

ingredients

EMPICOL® LX / B / MB is a dried powder of sodium lauryl sulfate. The fatty alcohol from which it is derived is sourced according to the Mass Balance rules set by the RSPO*. It is a versatile surfactant capable of producing a fine, creamy foam. It is also a good emulsifier and an excellent wetting agent, with good electrolyte tolerance, making it ideal for use as the primary surfactant in a range of cosmetic and detergent applications, such as shaving creams, laundry detergents and additives and toilet blocks.

EMPICOL® LX / N

ingredients

EMPICOL® LX / N is a dried powder of sodium lauryl sulfate. It is ideally suited for use as a foaming and wetting agent in oral care products and as an excipient in pharmaceuticals. It is manufactured specifically to meet the requirements of the monographs for sodium lauryl sulphate in the U.S. Pharmacopoeia (USP40/NF35) and European Pharmacopoeia 9th edition.

EMPICOL® LXV / B

ingredients

EMPICOL® LXV / B is dried sodium lauryl sulfate in the form of needles. It is a versatile surfactant capable of producing a fine, creamy foam. It is also a good emulsifier and an excellent wetting agent, with good electrolyte tolerance, making it ideal for use as the primary surfactant in a range of cosmetic and detergent applications, such as shaving creams.

EMPICOL® LXV / N

ingredients

EMPICOL® LXV / N is dried sodium lauryl sulfate in the form of needles. It is ideally suited for use as a foaming and wetting agent in oral care products and as an excipient in pharmaceuticals. It is manufactured specifically to meet the requirements of the monographs for sodium lauryl sulphate in the U.S. Pharmacopoeia (USP40/NF35) and European Pharmacopoeia 9th edition.

EMPICOL® LZ / B

ingredients

EMPICOL ® LZ / B is a dried powder of sodium lauryl sulfate. It is a versatile surfactant capable of producing a fine, creamy foam. It is also a good emulsifier and an excellent wetting agent, with good electrolyte tolerance, making it ideal for use as the primary surfactant in a range of cosmetic and detergent applications, such as shaving creams, laundry detergents and additives and toilet blocks.

EMPICOL® LZ / N

ingredients

EMPICOL® LZ / N is a dried powder of sodium lauryl sulfate. It is ideally suited for use as a foaming and wetting agent in oral care products and as an excipient in pharmaceuticals. It is manufactured specifically to meet the requirements of the monographs for sodium lauryl sulphate in the U.S. Pharmacopoeia (USP40/NF35) and European Pharmacopoeia 9th edition.

EMPICOL® LZ / N / MB

ingredients

EMPICOL® LZ / N / MB is a dried powder of sodium lauryl sulfate. The fatty alcohol from which it is derived is sourced according to the Mass Balance rules set by the RSPO*. It is ideally suited for use as a foaming and wetting agent in oral care products and as an excipient in pharmaceuticals. It is manufactured specifically to meet the requirements of the monographs for sodium lauryl sulphate in the U.S. Pharmacopoeia (USP40/NF35) and European Pharmacopoeia 9th edition.

EMPICOL® LZV / B

ingredients

EMPICOL ® LZV / B is dried sodium lauryl sulfate in the form of needles. It is a versatile surfactant capable of producing a fine, creamy foam. It is also a good emulsifier and an excellent wetting agent, with good electrolyte tolerance, making it ideal for use as the primary surfactant in a range of cosmetic and detergent applications, such as shaving creams, laundry detergents and additives and toilet blocks.

EMPICOL® LZV / B / MB

ingredients

EMPICOL® LZV / B / MB is dried sodium lauryl sulfate in the form of needles. The fatty alcohol from which it is derived is sourced according to the Mass Balance rules set by the RSPO*. It is a versatile surfactant capable of producing a fine, creamy foam. It is also a good emulsifier and an excellent wetting agent, with good electrolyte tolerance, making it ideal for use as the primary surfactant in a range of cosmetic and detergent applications, such as shaving creams, laundry detergents and additives and toilet blocks.

EMPICOL® LZV / BE

ingredients

EMPICOL® LZV / BE is dried sodium lauryl sulfate in the form of needles. This product is a versatile surfactant capable of producing a fine, creamy foam. It is also a good emulsifier and an excellent wetting agent, with good electrolyte tolerance, making it ideal for use as the primary surfactant in a range of cosmetic and detergent applications. The form is particularly useful for powder and tablet products, such as laundry detergents and additives and dishwash tablets, although it may also find application in many other diverse markets.

EMPICOL® LZV / BEP

ingredients

EMPICOL® LZV / BEP is dried sodium lauryl sulfate in the form of needles. This product is a versatile surfactant capable of producing a fine, creamy foam. It is also a good emulsifier and an excellent wetting agent, with good electrolyte tolerance, making it ideal for use as the primary surfactant in a range of cosmetic and detergent applications. The form is particularly useful for powder and tablet products, such as laundry detergents and additives and dishwash tablets, although it may also find application in many other diverse markets.

EMPICOL® LZV / N

ingredients

EMPICOL® LZV / N is dried sodium lauryl sulfate in the form of needles. It is ideally suited for use as a foaming and wetting agent in oral care products and as an excipient in pharmaceuticals.It is manufactured specifically to meet the requirements of the monographs for sodium lauryl sulphate in the U.S. Pharmacopoeia (USP40/NF35) and European Pharmacopoeia 9th edition.

EMPICOL® LZV / N / MB

ingredients

EMPICOL® LZV / N / MB is dried sodium lauryl sulfate in the form of needles. The fatty alcohol from which it is derived is sourced according to the Mass Balance rules set by the RSPO*. It is ideally suited for use as a foaming and wetting agent in oral care products and as an excipient in pharmaceuticals.It is manufactured specifically to meet the requirements of the monographs for sodium lauryl sulphate in the U.S. Pharmacopoeia (USP40/NF35) and European Pharmacopoeia 9th edition.

EMPICOL® LZV / NEP

ingredients

EMPICOL® LZV / NEP is dried sodium lauryl sulfate in the form of needles. It is ideally suited for use as a foaming and wetting agent in oral care products and as an excipient in pharmaceuticals.It is manufactured specifically to meet the requirements of the monographs for sodium lauryl sulphate in the U.S. Pharmacopoeia (USP40/NF35) and European Pharmacopoeia 9th edition.

EMPICOL® SDD / Y

ingredients

EMPICOL ® SDD / Y is an aqueous solution of disodium lauryl ethoxy (3EO) sulfosuccinate. This product is a versatile raw material primarily for use in Cosmetic applications.

EMPICOL® TL 40 / X

ingredients

EMPICOL® TL 40 / X is an aqueous solution of triethanolamine lauryl sulfate. TEA lauryl sulfate is a versatile surfactant used in a wide variety of applications. It is particularly suited to creating a creamy luxurious foam in Cosmetic formulations, such as shampoos, shower gels and liquid soaps, etc. Since this product is neutralised with TEA it may be seen to offer certain characteristics and advantages over equivalent sodium salts, such as improved cold storage, good emulsification and improved mildness to the skin.

EMPICOL® VBS D30 A

ingredients

EMPICOL® VBS D30 A is a super-concentrated blend of a nonionic surfactant and a solvent, both of which are vegetable derived, and an anionic surfactant. This concentrated blend has been specifically developed to prepare hard surface degreasers that work well on tenacious greasy stains that may be difficult to remove with traditional degreasing products. This product is a concentrated microemulsion specifically designed to give high wetting and degreasing properties intended to be used as is or diluted and/or modified to the customer's specific needs.

EMPICOL® VBS L30

ingredients

EMPICOL® VBS L30 is a super-concentrated blend of an anionic primary surfactant and a plant derived nonionic surfactant. This product has been designed to give a good wetting in conjunction with a controlled volume of foam intended to be diluted or modified to the customer's specific needs.

EMPICOL® XCT 10

ingredients

EMPICOL® XCT 10 is a concentrated blend of comparatively mild surfactants specifically developed to aid the rapid formulation of a broad spectrum of Cosmetic and Detergent products. Compliance Highlights Unavailable

EMPICOL® XHI-89

ingredients

EMPICOL® XHI-89 is a concentrated blend of primary and secondary surfactants specifically designed for the manufacture of dishwashing liquids by the addition to water. It is an improved version of EMPICOL® XHL 140. It is a Concentrated Detergent Base for Corrosive free and EO free Hand Dishwash liquids or Mild Hand Liquid Soaps.

EMPICOL® XHL 100

ingredients

EMPICOL® XHL 100 is an anionic surfactant concentrate suitable for manufacture of dishwashing liquids and liquid detergents by the addition to water. It is a concentrated blend of anionic surfactants, specifically designed to give the balanced combination of flash foam, foam stability and wetting. It has a good viscosity response, even at relatively low concentrations, which makes it ideal for the formulation of a variety of economic detergent liquids.

EMPICOL® XHL 140

ingredients

EMPICOL® XHL 140 is a concentrated blend of primary and secondary surfactants specifically designed for the manufacture of dishwashing liquids by the addition to water. It is a Concentrated Detergent Base for Corrosive free and EO free Hand Dishwash liquids or Mild Hand Liquid Soaps.

EMPIGEN® 5151

ingredients

EMPIGEN® 5151 is an aqueous solution of disodium cocoamphodiacetate. It is of particular interest for incorporation into low irritancy formulations like baby shampoos and baby baths. Its use can give formulation and performance benefits in terms of quality and quantity of foam even in the presence of soap or hard water, good wetting characteristics and easy to handle due to its low viscosity.

EMPIGEN® 5151 / MB

ingredients

EMPIGEN® 5151 / MB is an aqueous solution of disodium cocoamphodiacetate. The fatty acid from which it is derived is sourced according to the Mass Balance rules set by the RSPO*. It is an amphoteric surfactant compatible with anionic, nonionic, cationic and other amphoteric surfactants.

EMPIGEN® BB

ingredients

EMPIGEN ® BB is a 30% aqueous solution of lauryl betaine. The product is an amphoteric surfactant compatible with anionic, nonionic, cationic and other amphoteric surfactants. It is stable over a wide pH range, thus providing the formulator with a flexible ingredient for use in many applications. Its use can give formulation and performance benefits in terms of abundant stable foam, superior foaming and cleansing in the presence of soap and hard water and ease of viscosity adjustment. Lauryl betaine may be advantageous compared to many other amphoteric surfactants when formulating colourless or low colour products.

EMPIGEN® BB / HP

ingredients

EMPIGEN ® BB / HP is an aqueous solution of lauryl betaine with a reduced salt content. The product is an amphoteric surfactant compatible with anionic, nonionic, cationic and other amphoteric surfactants. It is stable over a wide pH range, thus providing the formulator with a flexible ingredient for use in many applications. Its use can give formulation and performance benefits in terms of abundant stable foam, superior foaming and cleansing in the presence of soap and hard water and ease of viscosity adjustment.

EMPIGEN® BKC 50

ingredients

EMPIGEN® BKC 50 is an aqueous solution of benzalkonium chloride at ca. 50% in water. It is a cationic surfactant and can be used as an excipient in drug formulations, as a softening agent in textiles or laundry, a dye levelling agent or as an antistatic agent.

EMPIGEN® BS / FE / MB

ingredients

EMPIGEN® BS / FE / MB is an aqueous solution of cocamidopropyl betaine. The fatty acid from which it is derived is sourced according to the Mass Balance rules set by the RSPO*. This product is an amphoteric surfactant compatible with anionic, nonionic, cationic and other amphoteric surfactants. It is stable over a wide pH range, thus providing the formulator with a flexible ingredient for use in many applications. Its use can give formulation and performance benefits in terms of abundant stable foam, superior foaming and detergency in the presence of soap and hard water, ease of viscosity adjustment and it may also be used to provide a mild conditioning effect.

EMPIGEN® BS / H 50 / MB

ingredients

EMPIGEN® BS / H 50 / MB is a concentrated aqueous solution of cocamidopropyl betaine. The fatty acid from which it is derived is sourced according to the Mass Balance rules set by the RSPO*. This product is an amphoteric surfactant compatible with anionic, nonionic, cationic and other amphoteric surfactants. It is stable over a wide pH range, thus providing the formulator with a flexible ingredient for use in many applications. Its use can give formulation and performance benefits in terms of abundant stable foam, superior foaming and detergency in the presence of soap and hard water, ease of viscosity adjustment and it may also be used to provide a mild conditioning effect.

EMPIGEN® BS/FE

ingredients

EMPIGEN® BS / FE is an aqueous solution of cocamidopropyl betaine. This product is an amphoteric surfactant compatible with anionic, nonionic, cationic and other amphoteric surfactants. It is stable over a wide pH range, thus providing the formulator with a flexible ingredient for use in many applications. Its use can give formulation and performance benefits in terms of abundant stable foam, superior foaming and detergency in the presence of soap and hard water, ease of viscosity adjustment and it may also be used to provide a mild conditioning effect.

EMPIGEN® BS/H50

ingredients

EMPIGEN® BS / H 50 is a concentrated aqueous solution of cocamidopropyl betaine. This product is an amphoteric surfactant compatible with anionic, nonionic, cationic and other amphoteric surfactants. It is stable over a wide pH range, thus providing the formulator with a flexible ingredient for use in many applications. Its use can give formulation and performance benefits in terms of abundant stable foam, superior foaming and detergency in the presence of soap and hard water, ease of viscosity adjustment and it may also be used to provide a mild conditioning effect.

EMPIGEN® BS/HI

ingredients

EMPIGEN® BS/HI is an aqueous solution of cocamidopropyl betaine. This product is an amphoteric surfactant compatible with anionic, nonionic, cationic and other amphoteric surfactants. It is stable over a wide pH range, thus providing the formulator with a flexible ingredient for use in many applications. Its use can give formulation and performance benefits in terms of abundant stable foam, superior foaming and detergency in the presence of soap and hard water, ease of viscosity adjustment and it may also be used to provide a mild conditioning effect.

EMPIGEN® CDL 30/J/35

ingredients

EMPIGEN® CDL 30/J/35 is an aqueous solution of the amphoteric surfactant sodium lauroamphoacetate. Amphoacetates are of particular interest for incorporation into low irritancy formulations like baby shampoos and baby baths. Their use can give formulation and performance benefits in terms of quality and quantity of foam even in the presence of soap or hard water, good wetting characteristics.

EMPIGEN® CDL 60/P

ingredients

EMPIGEN® CDL 60/P is an amphoteric surfactant compatible with anionic, nonionic, cationic and other amphoteric surfactants. It is of particular interest for incorporation into low irritancy formulations like baby shampoos and baby baths. Its use can give formulation and performance benefits in terms of quality and quantity of foam even in the presence of soap or hard water, good wetting characteristics and easy to handle due to its low viscosity.

EMPIGEN® CDR 2 M / MB

ingredients

EMPIGEN® CDR 2M / MB is an aqueous solution of sodium cocoamphoacetate specifically manufactured to contain a high ratio of cocoamphodiacetate. The fatty acid from which it is derived is sourced according to the Mass Balance rules set by the RSPO*. EMPIGEN® CDR 2M / MB is an amphoteric surfactant compatible with anionic, nonionic, cationic and other amphoteric surfactants.

EMPIGEN® CDR 2M

ingredients

EMPIGEN® CDR 2M is an aqueous solution of sodium cocoamphoacetate specifically manufactured to contain a high ratio of cocoamphodiacetate. It is of particular interest for incorporation into low irritancy formulations like baby shampoos and baby baths. Its use can give formulation and performance benefits in terms of quality and quantity of foam even in the presence of soap or hard water, good wetting characteristics and easy to handle due to its low viscosity.

EMPIGEN® CDR 60

ingredients

EMPIGEN ® CDR 60 is an aqueous solution of sodium cocoamphoacetate. It is an amphoteric surfactant compatible with anionic, nonionic, cationic and other amphoteric surfactants.

EMPIGEN® HBC 40

ingredients

EMPIGEN® HBC 40 is an aqueous solution hydroxyethyl laurdimonium chloride at circa 40% active. The particular characteristics of EMPIGEN® HBC 40 can be utilised to offer various potential benefits. When used as a co-surfactant with an excess of anionic surfactant, the resulting complex can improve basic functions such as wetting and detergency. The cationic behaviour might also help to provide a conditioning effect.

EMPIGEN® OB

ingredients

EMPIGEN® OB is an aqueous solution of lauramine oxide. Amine oxides are extremely versatile co-surfactants. In detergents they help to create and stabilise copious foam, as well as improving emulsification and soil removal and the incorporation of an amine oxide into a shampoo can improve the conditioning characteristics. They are resistant to oxidation and are commonly used as solubilising agents and viscosity modifiers in household bleaches with both hypochlorite and peroxide. Their properties can be modified by adjusting the pH of the formulation.

EMPIGEN® OB / MB

ingredients

EMPIGEN® OB / MB is an aqueous solution of lauramine oxide. The fatty alcohol from which the lauryl dimethylamine is derived is sourced according to the Mass Balance rules set by the RSPO*. Amine oxides are extremely versatile co-surfactants. In detergents they help to create and stabilise copious foam, as well as improving emulsification and soil removal and the incorporation of an amine oxide into a shampoo can improve the conditioning characteristics. They are resistant to oxidation and are commonly used as solubilising agents and viscosity modifiers in household bleaches with both hypochlorite and peroxide. Their properties can be modified by adjusting the pH of the formulation.

EMPIGEN® OD

ingredients

EMPIGEN® OD is an aqueous solution of alkyl (C12-C18) dimethylamine oxide. Amine oxides are extremely versatile co-surfactants. In detergents they help to create and stabilise copious foam, as well as improving emulsification and soil removal and the incorporation of an amine oxide into a shampoo can improve the conditioning characteristics. They are resistant to oxidation and are commonly used as solubilising agents and viscosity modifiers in household bleaches with both hypochlorite and peroxide. Their properties can be modified by adjusting the pH of the formulation.

EMPIGEN® OD / MB

ingredients

EMPIGEN® OD / MB is an aqueous solution of alkyl (C12-C18) dimethylamine oxide. The fatty alcohol from which the alkyl (C12-C18) dimethylamine is derived is sourced according to the Mass Balance rules set by the RSPO*. Amine oxides are extremely versatile co-surfactants. In detergents they help to create and stabilise copious foam, as well as improving emulsification and soil removal and the incorporation of an amine oxide into a shampoo can improve the conditioning characteristics. They are resistant to oxidation and are commonly used as solubilising agents and viscosity modifiers in household bleaches with both hypochlorite and peroxide. Their properties can be modified by adjusting the pH of the formulation.

EMPIGEN® OH 25

ingredients

EMPIGEN ® OH 25 is an aqueous solution of myristamine oxide. Amine oxides are extremely versatile co-surfactants. In detergents they help to create and stabilise copious foam, as well as improving emulsification and soil removal and the incorporation of an amine oxide into a shampoo can improve the conditioning characteristics. They are resistant to oxidation and are commonly used as solubilising agents and viscosity modifiers in household bleaches with both hypochlorite and peroxide. Their properties can be modified by adjusting the pH of the formulation.

EMPIGEN® OS / A

ingredients

EMPIGEN ® OS / A is an aqueous solution of cocamidopropyl amine oxide. Amidoamine oxides are extremely versatile surfactants. They provide cleaning, foaming, wetting and emulsification in a wide variety of industrial applications.

EMPILAN® 2502

ingredients

EMPILAN® 2502 is coconut diethanolamide produced by the direct amidation of vegetable oil and it therefore contains residual glycerol. This product is a very good foam-boosting/stabilising agent when used in conjunction with anionic surfactants, such as lauryl sulphates and lauryl ether sulphates. It also provides an efficient means of increasing the viscosity of liquid formulations and can be used to pre-solubilise oils and perfumes during formulation.

EMPILAN® 2502 / MB

ingredients

EMPILAN® 2502 / MB is coconut diethanolamide produced by the direct amidation of vegetable oil and it therefore contains residual glycerol. The vegetable oil from which it is derived is sourced according to the Mass Balance rules set by the RSPO*. This product is a very good foam-boosting/stabilising agent when used in conjunction with anionic surfactants, such as lauryl sulphates and lauryl ether sulphates. It also provides an efficient means of increasing the viscosity of liquid formulations and can be used to pre-solubilise oils and perfumes during formulation.

Empilan® APC 50

ingredients

Empilan® APC 50 is a mild non-ionic surfactant, ideal for use as either the primary or secondary surfactant in home care applications. It is a light yellow, turbid liquid produced from natural and renewable raw materials. It is readily biodegradable and compatible with a broad range of surfactants and polymers. Empilan® APC 50 offers synergistic effects with other surfactants that reduces irritation and improves foam quality.

Empilan® APD 50

ingredients

Empilan® APD 50 is a mild non-ionic surfactant, ideal for use as either the primary or secondary surfactant in home care applications. It is a light yellow, turbid liquid produced from natural and renewable raw materials. It is readily biodegradable and compatible with a broad range of surfactants and polymers. Empilan® APD 50 offers synergistic effects with other surfactants that reduces irritation and improves foam quality.

Empilan® APL 50

ingredients

Empilan® APL 50 is a mild non-ionic surfactant, ideal for use as either the primary or secondary surfactant in home care applications. It is a light yellow, turbid liquid produced from natural and renewable raw materials. It is readily biodegradable and compatible with a broad range of surfactants and polymers. Empilan® APL 50 offers synergistic effects with other surfactants that reduces irritation and improves foam quality.

EMPILAN® CIS

ingredients

EMPILAN ® CIS is a coconut monoisopropanolamide flake based on coconut methyl ester. This product is a very good foam-booster and stabilizer that also improves the texture of the foam. In addition, its use provides an efficient means of increasing the viscosity of liquid formulations. EMPILAN® CIS is mostly used in personal care formulations such as shampoos, bath products, shower gels and hand soaps but it can be present in liquid detergents. It may also act as solubiliser for perfumes and essential oils.

EMPILAN® CME/T

ingredients

EMPILAN® CME / T is cocamide MEA in flake form. It is an excellent co-surfactant for both cosmetic and detergent applications. It is capable of enhancing the foam, in terms of boosting the volume and stabilising it against the detrimental affects of hard water and soap. It can also be used to aid the dissolution or emulsification of oils and other hydrophobic ingredients in formulations as well as helping to remove greasy soils in cleaning applications.

EMPILAN® EGDS / A

ingredients

EMPILAN ® EGDS / A is a mixture of mono and diesters of ethylene glycol and stearic acid with a high content of diester. Glycol Distearate is used as pearlising agent, opacifier and viscosity builder in many different types of personal care products like creams and lotions, shampoos, liquid soaps and bath gels. It can also be used as softening agent in laundry liquid formulations and as general-purpose emulsifier and emulsions stabilizer in a wide range of industrial applications.

EMPILAN® EGMS

ingredients

EMPILAN® EGMS is a glycol cetearate in flake form. It is used as pearlising agent in low viscosity shampoos, cleansing creams, liquid soaps and bath gels. This product is also used as an opacifier and oil-soluble emulsifier in such preparations as hand lotions and hand creams. The viscosity of the finished emulsion varies directly with the concentration of the ester but generally speaking 0.5% to 5.0% of the product may be used in hand lotions and 1.0% to 10.0% in hand creams.

EMPILAN® KA 5

ingredients

EMPILAN ® KA 5 is an alcohol ethoxylate based on a C10-C12 alcohol. The degree of ethoxylation is circa 5. It is an efficient wetting and foaming agent used to provide cleaning, foaming, wetting and emulsification in a wide variety of industrial applications including Home, Beauty and Personal Care.

EMPILAN® KA 5 / 90

ingredients

EMPILAN ® KA 5 / 90 is a 90% solution of a C10-C12 alcohol condensed with 5 moles of ethylene oxide. It is an efficient wetting and foaming agent used to provide cleaning, foaming, wetting and emulsification in a wide variety of industrial applications including Home, Beauty and Personal Care.

EMPILAN® KCL 11

ingredients

EMPILAN ® KCL 11 is an alcohol ethoxylate derived from a C12-15 alcohol. The degree of ethoxylation is circa 11. This product is an efficient wetting and foaming agent and has excellent emulsification properties. It is particularly effective in providing cleaning, wetting and emulsification in a wide variety of industrial applications, including household care applications such as surface cleaning and perfume solubilisation.

EMPILAN® KCL 11 / 90

ingredients

EMPILAN® KCL 11 / 90 is a 90% solution of an alcohol ethoxylate derived from a predominantly linear C12-15 alcohol. The degree of ethoxylation is circa 11. This product is an efficient wetting and foaming agent and has excellent emulsification properties. It is particularly effective when used to provide cleaning, wetting and emulsification in a wide variety of applications, including household care applications such as surface cleaning and perfume solubilisation as well as industrial emulsification processes.

EMPILAN® KCL 7

ingredients

EMPILAN® KCL 7 is an alcohol ethoxylate based on a C12-C15 alcohol. The degree of ethoxylation is circa 7. It is an efficient wetting and foaming agent used to provide cleaning, foaming, wetting and emulsification in a wide variety of industrial applications.

EMPILAN® KCL 7 / 90

ingredients

EMPILAN® KCL 7 / 90 is a 90% solution of a C12-C15 alcohol condensed with 7 moles of ethylene oxide. It is an efficient wetting and foaming agent used to provide cleaning, foaming, wetting and emulsification in a wide variety of industrial applications.

EMPILAN® KCL 9 / 85

ingredients

EMPILAN® KCL 9 / 85 is a C12-C15 synthetic (oxo) alcohol condensed with 9 moles of ethylene oxide, as a 85% aqueous solution. It is used in the formulation of liquid and powder detergent formulations. Compliance Highlights Unavailable

EMPILAN® KI 6

ingredients

EMPILAN® KI 6 is an ethoxylated isotridecyl alcohol. This product is an excellent wetting agent and emulsifier suitable for a wide range of applications. It is compatible with anionic, amphoteric, cationic and other non-ionic surfactants and is relatively stable over a wide pH range.

EMPILAN® KI 6.5

ingredients

EMPILAN® KI 6.5 is an ethoxylated isotridecyl alcohol.

EMPILAN® KI 8

ingredients

EMPILAN ® KI 8 is an iso-tridecyl alcohol ethoxylate containing approximately 8 moles of ethylene oxide. This product exhibits excellent detergent and emulsification properties and it is suitable for a wide range of applications. It is compatible with anionic, amphoteric, cationic and other non-ionic surfactants and is relatively stable over a wide pH range.

EMPILAN® KR 2.5

ingredients

EMPILAN ® KR 2.5 is an alcohol ethoxylate based on a C9-C11 alcohol. The degree of ethoxylation is circa 2.5. It is an efficient wetting agent used to provide cleaning, wetting and emulsification in a wide variety of industrial applications. It is dispersible in water and it can be used to modify the foaming characteristics in nonionic systems or to stabilise foam in anionic or mixed systems.

EMPILAN® KR 5

ingredients

EMPILAN® KR 5 is an alcohol ethoxylate based on a C9-C11 alcohol. The degree of ethoxylation is circa 5. It is an efficient wetting and foaming agent used to provide cleaning, foaming, wetting and emulsification in a wide variety of industrial applications.

EMPILAN® KR 6

ingredients

EMPILAN ® KR 6 is an alcohol ethoxylate based on a C9-C11 alcohol. The degree of ethoxylation is circa 6. It is an efficient wetting and foaming agent used to provide cleaning, foaming, wetting and emulsification in a wide variety of industrial applications.

EMPILAN® KR 6 / 90

ingredients

EMPILAN® KR 6 / 90 is a synthetic C9-C11 alcohol condensed with 6 moles of ethylene oxide liquefied by addition of 10% water. It is an excellent wetting agent and emulsifier suitable for a wide range of applications.

EMPILAN® KR 8

ingredients

EMPILAN ® KR 8 is an alcohol ethoxylate based on a C9-C11 alcohol. The degree of ethoxylation is circa 8. It is an efficient wetting and foaming agent used to provide cleaning, foaming, wetting and emulsification in a wide variety of industrial applications.

EMPILAN® KT 7 / 80

ingredients

EMPILAN® KT 7 / 80 is a 80% solution of an alcohol ethoxylate derived from a linear C10 alcohol. The degree of ethoxylation is circa 7. It is an efficient wetting and foaming agent. It is a particularly effective detergent for textile washing and laundry but it may be used to provide cleaning, wetting and emulsification in a wide variety of applications.

EMPILAN® ME10-CN

ingredients

EMPILAN® ME10-CN is a coconut-based 10-mole ethoxylate. It is a water-soluble, nonionic surface active agent which is compatible with other nonionic surfactants and with most anionic and cationic surfactants. It is an excellent emulsifier and detergent used in Personal Care Products,Laundry Prespotters and Hard Surface Cleaners

EMPILAN® PF 7165

ingredients

EMPILAN® PF 7165 is a low foaming alkoxylated alcohol containing circa 5% water to improve the handling properties. It produces a relatively unstable foam, that will rapidly die-away and might find use as a wetting agent, detergent or emulsifier in applications that require low foaming characteristics, such as surface cleaning, textile finishing, agrochemical formulations, etc.

EMPILAN® PF 7168

ingredients

EMPILAN® PF 7168 is a low foam nonionic surfactant. It offers the combination of excellent wetting, emulsification and low-foam performance and it is particularly suited for application at ambient or relatively low working temperatures. It is a versatile surfactant that may bring benefits in a wide range of applications, such as surface cleaning, textile treatment and as a low foam wetter or synergistic wetting agent and emulsifier in surface coating formulations and agricultural applications.

EMPILAN® PF 7169

ingredients

EMPILAN® PF 7169 is a low foam nonionic surfactant. It is a versatile low foam surfactant capable of offering excellent wetting performance. It is particularly suited to applications operating at elevated temperatures or to processes with short cycle times. It is a versatile surfactant that may bring benefits in a wide range of applications, such as surface cleaning, textile treatment and as a low foam wetter or synergistic wetting agent and emulsifier in surface coating formulations and agricultural applications.

EMPIMIN® LSM 30

ingredients

EMPIMIN® LSM 30 is an aqueous solution of a sodium alkyl ethoxy sulphate for industrial application. It is a low viscosity, easily handleable product with good stability against clouding or precipitation in cold weather conditions. Its characteristics make it a particularly good wetting and foaming agent.

EMPIMIN® OP 70

ingredients

EMPIMIN ® OP 70 is a sodium di-octyl sulfosuccinate in water and propylene glycol solution. This product can be used in a wide range of markets and applications. It shows excellent wetting, dispersing and emulsifying properties as ingredient in different formulations as detergent, personal care, textile or agrochemical. It is also suitable for the manufacture of polymeric compounds by emulsion polymerisation where the product acts as the emulsifier.

EMPIMIN® OT

ingredients

EMPIMIN® OT is a solution of sodium dioctyl sulfosuccinate in water/ethanol. It is an excellent wetting agent for aqueous systems even at low concentrations. It provides also an excellent dispersing effect on both aqueous and non aqueous dispersions. The applications of this product include detergent products, personal care products (as foam booster), agrochemical formulations and textile auxiliary products. It is also suitable for the manufacture of polymeric compounds by emulsion polymerisation where the product acts as the emulsifier.

EMPIPEARL® XA 200 / X

ingredients

EMPIPEARL® XA 200 / X is a concentrated blend of ingredients developed to give a pearlescent finish to formulated products. It can be used to provide a luxurious pearlescent finish to formulated products, such as shampoos, foam baths and shower gels. Using this concentrate will help to eliminate expensive heating and time consuming controlled cooling steps normally associated with processing solid pearlising ingredients, as well as ensuring consistent performance. Addition levels of 0.5 - 2% are typically sufficient in most applications.

EMPIPEARL® XA 300 / X

ingredients

EMPIPEARL ® XA 300 / X is a pearlescent concentrate based on anionic, nonionic and amphoteric surfactants which are manufactured using vegetable derived raw materials. The product can be added to shampoos, foam baths, shower gels and hand cleaning products to provide an opacified or pearlised appearance. The use of this product removes the need for expensive heating equipment which would normally be required for incorporation of a solid pearling agent. It also reduces production time, thereby helping to increase throughput of the manufactured finished product (for use with pearlising concentrates).

EMPIPEARL® XA 400 / X

ingredients

EMPIPEARL® XA 400 / X is a concentrated blend of ingredients developed to give a pearlescent finish to formulated products. This product can be used to provide a luxurious pearlescent finish to formulated products, such as shampoos, foam baths and shower gels. Using this concentrate will help to eliminate expensive heating and time consuming controlled cooling steps normally associated with processing solid pearlising ingredients, as well as ensuring consistent performance. Addition levels of 0.5 - 2% are typically sufficient in most applications.

EMPIPEARL® XA 500 / X

ingredients

EMPIPEARL® XA 500 / X is a concentrated blend of ingredients developed to give a pearlescent finish to formulated products. It can be used to provide a luxurious pearlescent finish to formulated products, such as shampoos, foam baths and shower gels. Using this concentrate will help to eliminate expensive heating and time consuming controlled cooling steps normally associated with processing solid pearlising ingredients as well as ensuring consistent performance. Addition levels of 0.5 - 2% are typically sufficient in most applications.

EMPIWAX® CL

ingredients

EMPIWAX® CL is a non ionic oil-in water emulsifier blend. It is a versatile emulsifying wax used in the formulation of creams, lotions and other cosmetics which contain oil and water.

EMPIWAX® SK / BP

ingredients

EMPIWAX® SK / BP is a self emulsifying wax based on fatty alcohol and sodium lauryl sulfate. The product is a versatile self-emulsifying wax used in the formulation of creams and lotions, principally in the cosmetic industry.

Enviomet® BOOST

ingredients

Enviomet® BOOST is 100% naturally derived polymer from the guar bean plant, designed for use in home care products as a thickener and foam booster. It is compatible with all surfactant classes. It is a non-derivatized polymer developed from the ground endosperm of Cyamopsis Tetragonoloba.

Enviomet™ C140

ingredients

Enviomet™ C140 is a 38% Na3EDDS solution made from L-aspartic acid and is free from NTA, formaldehyde, cyanide and phosphorous. It is readily biodegradable under OECD guidelines. Enviomet™ C140 is an excellent chelator for transition metals especially in hard water systems and can be used in a range of applications. Applications for its use include personal care, laundry, dish washing, and hard surface cleaners.

Enviomet™ C265

ingredients

Enviomet™ C265 is a 65% H4EDDS free flowing powder made from L-aspartic acid and is free from NTA, formaldehyde, cyanide and phosphorous. It is readily biodegradable under OECD guidelines. This product is an excellent chelator for transition metals, especially in hard water systems, and can be used in a range of applications, including personal care, laundry, dish washing, and hard surface cleaners.

Enviomet™ C270

ingredients

Enviomet™ C270 is a 70% H4EDDS free flowing powder made from L-aspartic acid and is free from NTA, formaldehyde, cyanide and phosphorous. It is readily biodegradable under OECD guidelines. Enviomet™ C270 is an excellent chelator for transition metals especially in hard water systems and can be used in a range of applications in personal care, laundry, dish washing, and hard surface cleaners.

ACTIVEMOL™ GC

ingredients

ACTIVEMOL™ GC can be used as a solvent in cosmetic, personal care applications. Due to its low toxicity, low evaporation rate, low flammability, and moisturizing ability, GC possesses the characteristics required of a wetting agent for cosmetic clays.

FOR MATERIAL SUPPLIERS

Put your materials in front of formulators.

Give product developers the specs, certifications, and sample path they need to shortlist your grades.

Talk to our team
Formulation scientist ready to help suppliers reach product developers