Home / Adhesives & Sealants / Suppliers / GEO Specialty Chemicals, Inc. TRIMET Products Group
Adhesives & Sealants
GEO Specialty Chemicals, Inc. TRIMET Products Group
GEO Specialty Chemicals, Inc. TRIMET Products Group lists 32 grades in Adhesives & Sealants. The sheets saved on this site are below.
Grades from GEO Specialty Chemicals, Inc. TRIMET Products Group
DMPA® Dimethylolpropionic Acid
DMPA® Dimethylolpropionic Acid unique and versatile hindered diol molecule with both hydroxyl and carboxy functionality. DMPA is an odourless, free flowing white crystalline solid which provides superior advantages in the formulation and processing of water soluble resins. This product has a neutralization equivalent of 141.0 max., a decomposition temperature of 230°C, and a water insolubles amount of 50.0ppm max.
DMPA® Polyol HA-0135
DMPA® Polyol HA-0135 is a linear polyester polyol that contains both hydroxyl and acid functionality. The structure of DMPA® Polyol HA-0135 has been specifically designed to achieve maximum hydrolytic stability in water-borne applications. DMPA® Polyol HA-0135 can be used to formulate high solids and NMP free polyurethane dispersions. It is a source of acid functionality for water-borne applications, is a co-resin to improve pigment wetting, dispersing and stabilizing. This product has an acid value of 100-115mg KOH/g, density @ 25°C of 1200-1235g/l, and a non-volatile content of 98% min.
DMPA® Polyol HA-0135LV2
DMPA® Polyol HA-0135LV2 is a low crystalline polyester polyol with both acid and hydroxyl functionality. Like DMPA® Polyol HA-0135, this resin is designed to eliminate the need for NMP as a processing solvent in the manufacturing of polyurethane dispersions. This product offers increased hydroxyl concentration, increased coating hardness and chemical resistance. It has low crystallinity and allows for ease of handling at lower temperatures. DMPA® Polyol HA-0135LV2 has a hydroxyl value of 330-345mg KOH/g, a density @ 25°C of 1170-1200g/l, a viscosity @ 25°C of 172 poise, and a colour content (APHA) of < 250 max.
TRI-REZ® Polyol 1030-60 Polyester Resin
TRI-REZ® Polyol 1030-60 Polyester Resin is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1030-60 makes it an ideal polyol for formulating high solids and water-borne polyurethane resins. This product has a viscosity (Brookfield @ 25°C) of 40-60P, a moisture content of 0.05% max., and a hydroxyl number (as supplied) of 57-63mg KOH/g.
TRI-REZ® Polyol 1030-90 Polyester Resin
TRI-REZ® Polyol 1030-90 Polyester Resin is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1030-90 makes it an ideal polyol for formulating high solids and water-borne polyurethane resins. This product has an acid value (as supplied) of 0.8mg KOH/g max., a viscosity (Brookfield @ 25°C (as supplied)) of 15-30 Poise, and a colour (APHA) of 250 max.
TRI-REZ® Polyol 1220A-300 Polyester Resin
TRI-REZ® Polyol 1220A-300 is a 100% solids highly branched saturated polyester polyol based on TRIMET® TME (Trimethylolethane). The highly branched structure of TRI-REZ® Polyol 1220A-300 makes it an ideal choice for formulating two component, high solids polyurethane coatings and elastomers that require excellent UV and chemical resistance properties.
TRI-REZ® Polyol 1230-60 Polyester Resin
TRI-REZ® Polyol 1230-60 Polyester Resin is a non-crystalline saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1230-60 makes it an ideal polyol for formulating high solids and water-borne polyurethane resins. This product is a clear, viscous liquid, with a density (pounds / gallon @ 25°C) of 9.3 +/- 0.3, a moisture content of 0.05 max., viscosity (Brookfield @ 25°C (as supplied)) of 300-500P, and a hydroxyl number (as supplied) of 57-63mg KOH/g.
TRI-REZ® Polyol 1230-90 Polyester Resin
TRI-REZ® Polyol 1230-90 Polyester Resin is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1230-90 makes it an ideal polyol for formulating high solids and water-borne polyurethane resins. This product is a clear, viscous liquid, with an acid value (as supplied) of 0.8mg KOH/g max., a hydroxyl content (as supplied) of 87-93mg KOH/g, and a viscosity (Brookfield @ 25°C (as supplied)) of 100-200P.
Bisomer® Amine D700
Bisomer® Amine D700 (77% aqueous dimethylaminohydroxy-propane solution) is a multifunctional amino alcohol additive for aqueous polymer systems. It forms an aqueous azeotrope that minimizes dry time and maximizes amine elimination. The surfactant effect of Bisomer® Amine D700 provides enhanced pigment dispersion, wetting and flow with additional benefits for water-based system formulators. This product has a water content of 22-24%, an active matter of 74-77.5%, a colour number of 200 Pt/Co max., and a molecular weight of 103g/mol.
Bisomer® BDDMA
Bisomer® BDDMA (1,4 Butanediol Dimethacrylate) is a low viscosity, low odour dimethacrylate monomer. It is non-toxic, non-irritating and not a sensitiser. It is free of all R risk phrases and ideal in label-free systems. This product has an inhibitor (MEHQ) content of 300-500ppm, a colour number of 100 Pt/Co max., a total polymerisable monomers amount of 99.0% min., and a molecular weight (av) of 226g/mol.
Bisomer® BZMA
Bisomer® BZMA (Benzyl Methacrylate) is low viscosity mono-functional monomer suitable for a wide range of applications. It is low viscosity and hydrophobic, and is particularly suitable as a reactive diluent in adhesives, sealants, inks and coatings. This product has a methoxyhydroquinone content of 50 ± 5ppm, an acid number of < 0.02mg KOH/g, and a refractive index @ 20°C of 1.51.
Bisomer® C13MA
Bisomer® C13MA (Isotridecyl Methacrylate) is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and excellent as a flexibilising and plasticising monomer. This product has a total polymerisable monomers (mass) of > 99.0%, a molecular weight (av) of 268g/mol, and an inhibitor (MEHQ) content of 75-125ppm.
Bisomer® CHMA
Bisomer® CHMA is a hydrophobic methacrylate monomer. It is a mono-functional methacrylate, making it ideal for acrylic polymer synthesis. Bisomer® CHMA can be used to improve the hydrophobicity, weathering, physical and chemical resistance of acrylic resins. This product is also a useful reactive diluent in 2K adhesives and coatings.
Bisomer® CL HEMA
Bisomer® CL HEMA (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogels.
Bisomer® DALP
Bismoer® DALP is a stable ester of high purity, capable of undergoing polymerisation at moderate temperatures to yield thermosetting or thermoplastic resins. It possesses valuable properties for adhesives, coatings, casting and potting compounds. This product has an ester of 99% min., an iodine number of 196gl^2/100g min., and a density @ 20°C of 1.115 to 1.121kg/l.
Bisomer® DEGDMA HI
Bisomer® DEGDMA HI (Diethyleneglycol Dimethacrylate) is a low viscosity aliphatic dimethacrylate monomer ideal as a co-monomer for improving hardness and mechanical properties of numerous plastics, adhesives, sealants and especially unsaturated polyesters and acrylic polymers such as acrylic sheet and acrylic flooring. This product has a refractive index @ 20°C of 1.455-1.460, a residual solvent amount of 0.8% max., and an inhibitor (MEHQ) content of 650-850ppm.
Bisomer® EP 100 DMA
Bisomer® EP 100 DMA is the dimethacrylate ester of a specifically designed block polyalkyleneglycol. Based around a 12 unit propylene oxide (PO) backbone, both ends of the chain are capped with 3 moles of ethylene oxide (EO) prior to esterification. This product has a saponification value of 90-110mg KOH/g, an inhibitor (MEHQ) content of 90-120ppm, and a molecular weight (av) of 1114g/mol.
Bisomer® EP 150 DMA
Bisomer® EP 150 DMA is a dimethacrylate ester of a specifically designed block polyalkyleneglycol which has the inherent ability to modify the hydrophobic / hydrophilic balance in formulated systems. Based around a 7 unit propylene oxide (PO) backbone, both ends of the chain are capped with 2 moles of ethylene oxide (EO) prior to esterification. This product has a saponification value of 140-160mg KOH/g, an inhibitor (MEHQ) content of 70-100ppm, and a molecular weight (av) of 736g/mol.
Bisomer® HEMA
Bisomer® HEMA (Hydroxyethyl Methacrylate) is used extensively in the production of acrylic polyols for automotive OEM and refinish coatings as well as industrial coatings, it is non-toxic and non-yellowing. This product has a diester (EGDMA) of 97.0%, an inhibitor (MEHQ) content of 200-240ppm, and an acid number of < 1.0mg KOH/g.
Bisomer® HEMA HP
Bisomer® HEMA HP (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogels.
Bisomer® HPMA
Bisomer® HPMA (Hydroxypropyl Methacrylate) monomer for special polymers. Bisomer® HPMA is used extensively in the production of acrylic polyols for automotive OEM and refinish coatings as well as industrial coatings. It is non-toxic and non-yellowing. This product has a molecular weight (av) 144g/mol, a diester (PGDMA) of 0.2% max., and a colour number of 10 Pt/Co max.
Bisomer® IDMA
Bisomer® IDMA is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and therefore an excellent flexibilising and plasticising monomer. It is also an excellent co-monomer in adhesive and sealant applications. This product acidity (methacrylic acid) of 0.01% max., an inhibitor (MEHQ) content of 75-125ppm, and an assay (GC) of 97.0% min.
Bisomer® LMA
Bisomer® LMA hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and is excellent as a flexibiliser and plasticiser. This product has a water content of 0.1% max., a colour number of 100 Pt/Co max., and an active monomer of 97.0%.
Bisomer® LMA 97SP
Bisomer® LMA 97SP is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg). It is excellent at imparting flexibility when used as a polymerisable plasticiser. Products containing Bisomer® LMA 97SP exhibit reduced variation in properties such as viscosity, pigment wetting, chemical resistance, adhesion, hardness, sheer strength and tack. This product is a key raw material for the synthesis of high quality acrylic resins for a wide range of applications, including industrial coatings, printing inks and pressure sensitive adhesive applications.
Bisomer® MPEG 350 MA
Bisomer® MPEG 350 MA (Methoxy Polyethyleneglycol Metha-crylate) is a long chain methacrylate monoester based on an ethylene oxide backbone. It is water soluble and contains approximately 8 ethylene oxide (EO) units in the chain. This product has saponification value of 127-140mg KOH/g, an inhibitor (MEHQ) content of 0.45-0.55%, and a water content of 0.5% max.
Bisomer® MPEG 550 MA
Bisomer® MPEG 550 MA (Methoxy Polyethyleneglycol Metha-crylate) is a long chain methacrylate monoester based on an ethylene oxide backbone. This product has a saponification value of 85-95mg KOH/g, an inhibitor (MEHQ) content of 0.15-0.20%, and a molecular weight (av) of 628g/mol.
Bisomer® PEG 200 DMA
Bisomer® PEG 200 DMA (Polyethyleneglycol 200 Dimetha-crylate) is a low viscosity aliphatic dimethacrylate monomer ideally used as a co-monomer for improving mechanical properties and chemical resistance of plastics, polyolefins, adhesives, sealants, unsaturated polyesters and especially acrylic polymers such as acrylic sheet and acrylic flooring. This product has an inhibitor (MEHQ) content of 300-500 ppm, an active monomer of 99.0%, and a molecular weight (ac) of 338g/mol.
Bisomer® PEM6 LD
Bisomer® PEM6 LD is based on ethylene oxide, is water soluble and contains a primary hydroxyl group. It is non-toxic and has an EINECS “Polymer” classification. It has a low Glass Transition Temperature (Tg) and offers excellent plasticising properties when incorporated into polymers. This product has a hydroxul value of 145-165mg KOH/g, a molecular weigh (av) of 350g/mol, and an inhibitor (MEHQ) content of 500-800ppm.
Bisomer® PPA 6
Bisomer® PPA 6 offers a less traditional route to the production of UV curable urethane acrylate oligomers. It is an excellent low shrinkage reactive diluent for UV systems based on urethane acrylates and vinyl esters (epoxy acrylates). This product has an acid numer of < 0.3mg KOH/g, a saponification value of 126-138mg KOH/g, a volatile components pf 0.5% max., and a molecular weight of 420g/mol.
Bisomer® PPM5 LI
Bisomer® PPM5 LI (Polypropyleneglycol Monomethacrylate) is a firmly established capping agent in urethane methacrylate oligomers for the production of photopolymer printing plates and dry film resists. This product has a hydroxyl number of 145-160mg KOH/g, a molecular weight (av) of 376g/mol, and an inhibitor (MEHQ) content of 300-500ppm.
Bisomer® PTE
Bisomer® PTE is widely used in activating MMA based acrylic resins; styrene based unsaturated polyesters and vinyl ester methacrylate formulations. This product has an amine value of 250-264mg KOH/g, a Gardner colour number of 15 max., and a molecular weight (av) of 217g/mol.
Bisomer® TEGDMA
Bisomer® TEGDMA is a low viscosity aliphatic dimethacrylate monomer that is ideal as a co-monomer for improving hardness and mechanical properties in plastics, polyolefins, adhesives and sealants. It is especially used to improve mechanical properties of unsaturated polyesters and acrylic polymers such as acrylic sheet and acrylic flooring. This product has a total polymerisable monomers of 99% min., a molecular weight (av) of 286g/mol, and an inhibitor (MEHQ) content of 250-400ppm.