Home / Adhesives & Sealants / Suppliers / BYK 毕克
Adhesives & Sealants
BYK 毕克
BYK 毕克 lists 109 grades in Adhesives & Sealants. The sheets saved on this site are below.
Grades from BYK 毕克
DISPERBYK®-118
DISPERBYK®-118 is a wetting and dispersing additive for solvent-borne systems to stabilize acidic, neutral and basic titanium dioxides, colored inorganic pigments, transparent iron oxides, fillers, and effect pigments. The additive improves the wetting and dispersing of all inorganic ?llers such as calcium carbonate and aluminum hydroxide (ATH). DISPERBYK®-118 is all-purpose for titanium dioxides. The additive causes lower viscosity and enables higher ?ller loading.
DISPERBYK-168 TF
DISPERBYK-168 TF is a wetting and dispersing additive for solvent-free, radiation curable coatings, printing inks and adhesives. DISPERBYK-168 TF is the tin-free variant of DISPERBYK-168 in GPTA.
DISPERBYK®-180
Wetting and dispersing additive for aqueous, solvent-based and solvent-free adhesives and sealants.
DISPERBYK®-190
Wetting and dispersing additive for aqueous adhesives and sealants.
DISPERBYK®-191
Wetting and dispersing additive for aqueous adhesives and sealants.
DISPERBYK®-192
Wetting and dispersing additive for aqueous adhesives and sealants.
DISPERBYK®-199 BF
DISPERBYK®-199 BF is a VOC-free wetting and dispersing additive for stabilizing organic and inorganic pigments in aqueous coatings, adhesives, pigment concentrates and care products. Biocide-free version of DISPERBYK-199.
DISPERBYK®-2015 BF
DISPERBYK®-2015 BF is a VOC- and solvent-free wetting and dispersing additive for aqueous coatings, printing inks, adhesives and care products. For resin-free pigment concentrates. Biocide-free version of DISPERBYK-2015.
DISPERBYK®-2018
DISPERBYK®-2018 is a VOC- and solvent-free wetting and dispersing additive for aqueous paint systems, floor coatings, printing inks,inkjet inks, adhesives, and pigment concentrates.
DISPERBYK®-2152
DISPERBYK®-2152 is an emission-free, hyperbranched wetting and dispersing additive for solvent-free epoxy systems and other reactive systems. Achieving excellent deflocculation and stabilization requires an additive with highly efficient pigment-affinic groups. In general, those pigment-affinic groups are aminic in nature and can react with the epoxy resins.
GARAMITE® 7303
GARAMITE® 7303 was developed using the patented Mixed Mineral Thixotrope (MMT) technology. The MMT technology provides performance benefits which are not possible with traditional organoclay additives. Traditional organoclays are very hard to disperse, typically requiring both very high shear mixing and a polar activator to help delaminate the aggregates of clay platelets. Due to the multiple particle morphologies of this product, the powder disperses very easily into oils or solvents with only moderate shear.
GARAMITE® 7305
GARAMITE® 7305 was developed using patented Mixed Mineral Thixotrope (MMT) technology. The MMT technology provides performance benefits which are not possible with traditional organoclay additives. Traditional organoclays are very hard to disperse, typically requiring both very high shear mixing and a polar activator to help delaminate the aggregates of clay platelets. Due to the multiple particle morphologies of this product, the powder disperses very easily into oils or solvents with only moderate shear.
LAPONITE B
LAPONITE B is a synthetic layered fluorosilicate. It is insoluble in water but hydrates and swells to give translucent, colorless colloidal dispersions. At 2 % concentration in water, highly thixotropic gels are obtained.
LAPONITE® RD
LAPONITE® RD is a synthetic layered silicate. It is insoluble in water but hydrates and swells to give clear and colourless colloidal dispersions. At concentrations of 2% or greater in water, highly thixotropic gels can be produced. This product is used for imparting a shear sensitive structure to a wide range of waterborne formulations. These include household and industrial surface coatings, cleansers, ceramic glazes, agrochemical, oilfield and horticultural products.
LAPONITE® RDS
LAPONITE® RDS is a synthetic layered silicate incorporating an inorganic polyphosphate peptiser. It hydrates and swells in water to give clear and colourless colloidal dispersions of low viscosity known as sols. At 10% concentration in water, these will remain free flowing for 24 hours. On addition of small quantities of electrolyte, highly thixotropic gels are formed rapidly. This product is used to impart a shear sensitive structure to a wide range of waterborne formulations including household and industrial surface coatings, cleansers, agrochemical and horticultural products.
LAPONITE® S482
LAPONITE® S482 is a synthetic layered silicate modified with a patented dispersing agent. It hydrates and swells in water to give translucent and colourless colloidal liquid dispersions known as sols. At 25% solids concentration in water, these will remain free flowing for up to 1 year. On addition of small quantities of electrolyte, or on addition to formulations containing e.g. resins, surfactants or pigments, highly thixotropic gels are formed rapidly. It is used to impart a shear sensitive structure to a wide range of waterborne formulations including DIY and industrial surface coatings, household cleaners, ceramic and agrochemical products.
LAPONITE® SL25
LAPONITE® SL25 is a ready-for-use liquid dispersion of synthetic layered silicate modified with a patented dispersing agent. Supplied at 25% solids content in water, LAPONITE® SL25 is a translucent and colourless low viscosity liquid dispersion. On addition to formulations containing e.g. resins, surfactants or pigments, highly thixotropic gels are formed rapidly. It is used to impart a shear sensitive structure to a wide range of waterborne formulations including DIY and industrial surface coatings, household cleaners, ceramic and agrochemical products.
NANOBYK®-3620
NANOBYK®-3620 is a VOC-free, aqueous dispersion made up of nanohybrid particles to protect glossy, aqueous, pigmented and unpigmented top-coats against scratching and abrasion. This protective property comes into effect quickly after only a brief drying period. NANOBYK® 3620 has no negative in?uences on the gloss and transparency, and is therefore particularly suitable for clear coats.
OPTIBENT® 1056
OPTIBENT® 1056 is a high-quality, carefully selected and activated layered silicate product and has been developed for cementitious tile adhesives and base coats (renders). Due to its excellent thixotropic properties, sag resistance and workability properties can be improved. This product is used for dry mix mortars and adhesives
OPTIBENT® 602
OPTIBENT® 602 is a high-quality, activated layered silicate product which creates special properties in mineral binding wall plasters and in hydraulically hardening tile adhesives due to its additional organic modification.
OPTIBENT® 6027
OPTIBENT® 6027 is natural untreated phylosilicate suitable to adjust the rheological properties of dry mix mortars, particularly cementitious tile adhesives according to C1-standard and other economic dry mix mortar applications.
OPTIBENT® 6042
OPTIBENT® 6042 is a natural occurring rheology modifier based on phyllosilicates providing softer consistency, improved sag control and open time with no negative impact on setting time. OPTIBENT 6042 is effective in mineral based adhesives, particularly in cementitious, fast setting and mid-set adhesives. OPTIBENT® 6042 is suitable in cementitious construction application allowing a balance of other organic thickeners such as water retention aids.
OPTIBENT® 987
OPTIBENT® 987 is a carefully selected, activated layered silicate product that has been developed for dry pre-mixed mortars and emulsion based systems. It shows a marked thixotropic effect and incorporates a yield value into the system.
OPTIGEL® CK
OPTIGEL® CK is a specially selected and activated bentonite product, is highly swelling in water and shows a marked thixotropic thickening effect. It prevents settling of heavy pigments/extenders and incorporates a yield value into the system. This product has applications in areas such as emulsion paints and plasters, dip coatings, primers, sealants and putties, ceramic frits and compounds, welding rods, foundry washes, cleaners and polishes, adhesives, bitumen emulsions, water reducible systems, and oil-in-water emulsions.
OPTIGEL® LX
OPTIGEL® LX is a modified bentonite which has been specially developed as a thickening agent for aqueous systems. It is an effective thixotropic thickener. This product is specially designed for use in latex emulsion systems and should not be used in water reducible (cosolvent) systems. It can be used alone or in combination with cellulosic materials to improve pigment suspension and to impart dripless application properties.
OPTIGEL® WA
OPTIGEL® WA, a specially selected and activated smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. It has a neutral pH-value and is particularly effective in neutral and alkaline systems. This product prevents the settling of heavy pigments or fillers, inhibits sagging, and allows the application of thick coatings.
OPTIGEL® WM
OPTIGEL® WM is an organically modified bentonite which has been specially developed as a thickening agent for aqueous systems. Due to its high thixotropy, it is particularly suited for improving consistency and stability of emulsion paints. Although the powder is slightly tinted, it is easy to incorporate and has no influence on the colour of the pigments added.
OPTIGEL® WX
OPTIGEL® WX, a specially selected and activated smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. This product is stable in diluted acids and bases and is particularly effective in acidic, neutral and alkaline systems. This product has applications in emulsion paints, release coatings, silicate paints, paint strippers, water reducible paints, liquid cleaners, inks, grinding pastes and abrasives, and car undercoatings.
RHEOBYK-411
RHEOBYK-411 is a liquid rheology additive for low-polarity solvent-borne and solvent-free coating systems to improve anti-sagging and anti-settling properties. The additive causes highly thixotropic flow behavior; post-addition is possible. It is recommended for low-polarity systems.
RHEOBYK-420
RHEOBYK-420 is a liquid rheology additive for aqueous and water-reducible coating systems for improving anti-sagging and anti-settling properties. The additive is also especially suited for manufacturing aqueous pigment concentrates. RHEOBYK-420 causes thixotropic flow behavior; post-addition is possible.
RHEOBYK-425
RHEOBYK-425 is a liquid, VOC-free rheology additive for aqueous systems to set the in-can viscosity and to improve the anti-sagging and anti-settling properties. It is suitable for all kinds of aqueous coatings, printing inks, and adhesives in order to improve the anti-sagging properties and set the required in-can viscosity of the formulation. The resulting increase in viscosity simultaneously improves the storage stability with reduced settling. When grinding pigment pastes, the additive can also increase the millbase viscosity and therefore improve the dispersion conditions.
RHEOBYK-430
RHEOBYK-430 is a liquid rheology additive for solvent-borne coatings, adhesives, and sealants to improve anti-sagging and anti-settling properties.
RHEOBYK-431
RHEOBYK-431 is a liquid rheology additive for solvent-borne coatings, adhesives, and sealants to improve anti-sagging and anti-settling properties. With the aid of the pigments and fillers, the additive generates a three-dimensional network structure. The entanglement of the high molecular weight polymers is responsible for the development of the pseudoplastic flow behavior.
RHEOBYK-7405
RHEOBYK-7405 is an aromatic- and tin-free rheology additive for solvent-free and solvent-borne systems to enhance the rheological properties in conjunction with organophilic phyllosilicates and hydrophilic fumed silica.
RHEOBYK-7410 CA
RHEOBYK-7410 CA is a liquid rheology additive to produce a highly thixotropic flow behavior for medium-polar solvent-borne and solvent-free systems.
RHEOBYK-7411 CA
RHEOBYK-7411 CA is a liquid rheology additive for low-polarity solvent-borne and solvent-free systems to produce a highly thixotropic flow behavior and to improve anti-sagging and anti-settling properties.
RHEOBYK-7420 CA
RHEOBYK-7420 CA is a liquid rheology additive to produce thixotropic flow behavior in aqueous and highly polar systems for improving anti-sagging and anti-settling properties.
RHEOBYK-7420 ET
RHEOBYK-7420 ET is a liquid rheology additive to generate thixotropic flow behavior in aqueous and highly polar systems to improve the anti-sagging and anti-settling properties.
RHEOBYK-7502
RHEOBYK-7502 is an organic rheology additive in powder form for increasing the stability of single component, silane-modified prepolymer systems, epoxy systems, and alkyd-based coating systems.
RHEOBYK-7503
RHEOBYK-7503 is an organic rheology additive in powder form for increasing the stability of single component, silane-modified prepolymer systems, epoxy systems, and alkyd-based coating systems.
RHEOBYK-7591
RHEOBYK-7591 is a rheology and processing additive for powder coatings particularly suitable for use in powder coating systems, and in this segment it is broadly compatible with various binders.
RHEOBYK-7610
RHEOBYK-7610 is a VOC-, APEO- and tin-free associative thickener for aqueous systems, to generate a highly pseudoplastic flow behavior.
RHEOBYK-H 3300 VF
RHEOBYK-H 3300 VF is a VOC-free polymer solution used to generate low shear viscosity. It is an aqueous solution of a hydrophobically modified nonionic polymer commonly called an associative thickener. The use of RHEOBYK-H 3300 VF will increase body by generating low shear viscosity with some impact on high shear viscosity.
RHEOBYK-H 6500 VF
RHEOBYK-H 6500 VF is an aqueous solution of a hydrophobically modified nonionic polymer commonly called an associative thickener. It is VOC-free and APEO free. The use of this product will increase low shear rheology, such as Stormer viscosity as well as improved sag control and some high shear or ICI viscosity.
RHEOBYK-H 7500 VF
RHEOBYK-H 7500 VF is a VOC-free associative thickener (HEUR) for aqueous systems, especially for spray applications, to generate a highly pseudoplastic flow behavior. It significantly increases the viscosity in the low shear range. It reduces sagging and increases storage stability. The additive is liquid and therefore easy to handle. It is not necessary to adjust the pH value or control the temperature during incorporation. When combined with rheology additives which are effective in the high shear range, such as the RHEOBYK-L/T series, it enables an optimum processability.
BYK®-012
BYK®-012 is a mineral oil and silicone free defoamer for aqueous VOC-free adhesives and sealants.
BYK®-016
BYK®-016 is a mineral oil and silicone-free defoamer for aqueous adhesives and sealants.
BYK®-022
Silicone defoamer for aqueous adhesives and sealants.
BYK®-023
Silicone defoamer for aqueous adhesives and sealants.
BYK®-024
Silicone defoamer for adhesives and sealants based on aqueous emulsions.
BYK®-025
Silicone defoamer for adhesives and sealants based on aqueous emulsions.
BYK®-028
Silicone defoamer for adhesives and sealants based on aqueous emulsions.
BYK®-035
BYK®-035 is a mixture of paraffin based mineral oils and hydrophobic components, containing silicone. This product is especially suitable for emulsion systems with a PVC of 20-40. Its effectiveness is not impaired by high shear forces.
BYK®-037
BYK®-037 is an emulsion of paraffin based mineral oils and hydrophobic components, containing silicone. It is used in all emulsion paints and plasters as well as for defoaming during the dispersion production. BYK-037 is very cost-efficient.
BYK®-038
BYK®-038 is a mixture of paraffin based mineral oils and hydrophobic components, containing silicone. This product is especially designed for universal use in APEO-free emulsions. It contains a small amount of a paint compatible silicone which enhances excellent efficiency. BYK-038 should be preferably used in emulsion systems with a PVC from 20 to 70.
BYK®-077
BYK®-077 is a solution of a polymethylalkylsiloxane. This product prevents foam and bubble formation arising during paint production and application in non-polar to high polar systems. It does not cause dewetting or defects in intercoat adhesion when recoated.
BYK®-085
Silicone defoamer and surface additive for solvent-borne adhesives and sealants.
BYK®-088
Silicone air release additive recommended for PUR-based adhesives. Also suitable for epoxy systems.
BYK®-092
BYK®-092 is a VOC-free, silicone-containing defoamer for aqueous paint systems, printing inks and adhesives. Wide range of uses for conventional application methods
BYK®-093
High Persistence Silicone Defoamer for Aqueous Adhesives and Sealants. This defoamer combines high efficiency with broad compatibilty.
BYK®-154
Dispersant for adhesives and sealants based on aqueous emulsions. BYK®-154 is not available on the North American market. Use BYK®-156 instead, which differs only in solid contents.
BYK®-1610
BYK®-1610 is a defoamer for emulsion-based adhesives and sealants.
BYK®-1615
BYK®-1615 is a defoamer for adhesives and sealants based on aqueous emulsions.
BYK®-1630
BYK®-1630 is a VOC and APEO-free mineral oil defoamer for aqueous architectural coatings, general industrial coatings, floor coatings and adhesives.
BYK-1641
BYK-1641 is a VOC- and mineral oil-free defoamer for aqueous systems that is very easy to incorporate and has an excellent price-performance ratio.
BYK-1642
BYK-1642 is a polymer-based, VOC- and silicone-free defoamer for aqueous coatings, printing inks, adhesives, paper coatings, and construction chemicals. Optimum performance at the lowest dosage.
BYK-1745
BYK-1745 is a VOC- and silicone-free defoamer based on polymers and renewable as well as sustainable raw materials for aqueous adhesives and aqueous architectural coatings.
BYK®-1760
BYK®-1760 is an emission-free silicone and polymer-containing defoamer and air release agent for solvent-borne and solvent-free coatings, adhesives, sealants and casting resins. Particularly recommended for epoxy resin systems.
BYK®-1789
BYK®-1789 is a solvent-free, silicone-containing defoamer for aqueous, high build and fast-drying coating systems and adhesives. For improving air release and effectively preventing microfoam.
BYK®-3400
BYK®-3400 is a silicone surface additive for aqueous adhesives and sealants. It reduces the surface tension and thus improves subtrate wetting.
BYK®-3410
BYK®-3410 is a silicone-free surface additive for aqueous adhesives and sealants. It reduces the surface tension and thus improves subtrate wetting.
BYK®-345
BYK®-345 is a polyether modified siloxane. It is the solvent-free version of BYK-346. These additives improve substrate wetting due to strong reduction of surface tension; they also improve flow and leveling. They cause no or only slight foam stabilization and they do not impair recoatability.
BYK®-346
BYK®-346 is a solution of a polyether modified siloxane. This product is the standard additive to improve substrate wetting in aqueous systems. It should normally be added to the finished paint. If necessary, however, it can be added at any stage of the production process.
BYK®-347
BYK®-347 is a polyether modified siloxane. This product exhibits only minor activity at the interface paint/air due to its chemical structure. The advantage is a further improvement of recoatability. For better overspray acceptance a combination with BYK-345 is recommended.
BYK®-348
BYK®-348 is a polyether modified siloxane. This product is especially suitable for solvent-free aqueous formulations (zero-VOC-systems). These additives should normally be added to the finished paint. If necessary, however, they can be added at any stage of the production process.
BYK®-349
BYK®-349 is a silicone surfactant used to improve substrate wetting in aqueous systems. It is composed of polyether modified siloxane. This product provides various water-borne coatings with highly effective spreading, wetting and leveling. It is suitable for water-borne systems based on: styrene acrylic, pure acrylic and acrylic/PU combinations, crosslinkable polyurethanes and baking systems.
BYK®-3764
BYK®-3764 is a solvent-free silicone surface additive for aqueous, solvent-borne and solvent-free coatings and adhesives to increase surface slip and to greatly reduce surface tension. Minor foam stabilization and low dosage.
BYK®-3771
BYK®-3771 is a silicone surface additive for solvent-free, radiation-curable, and solvent-borne coatings, adhesives, and printing inks with a strong reduction in the surface tension. OH-functional and solvent-free.
BYK®-4509
BYK-4509 is an adhesion promoter for solvent-borne and aqueous systems applied to metallic substrates. It is compatible with most binders and is therefore ideal for universal use. This product is a salt of a polymer with acidic groups.
BYK®-4512
BYK®-4512 is an adhesion promoter for solvent-borne systems applied to metal substrates. It is particularly well-suited for use in chromate-free primers and on metal substrates that are pre-treated in a chromate-free manner.
BYK®-9076
BYK®-9076 is a high molecular weight additive for solvent-free adhesives and sealants BYK®-9076 is especially useful for the stabilization of acidic and neutral types of carbon black.
BYK®-9077
BYK®-9077 is a wetting and dispersing additive for solvent-free systems and pigment concentrates with high molecular weight. It is a copolymer with pigment affinic groups. This product reduces viscosity and leads to more Newtonian flow behavior in the mill-base. BYK-9077 is especially suited for stabilizing basic carbon black pigments. The product does not contain plasticizers.
BYK®-A 530
Air release agent and defoamer for solvent-based and solvent-free epoxy systems.
BYK®-A 535
Silicone-free defoamer / air release additive for solvent-free and solvent-borne epoxy and PUR-based adhesives and sealants.
BYK®-A 550
BYK®-A 550 shows a strong air release effect without creating a strong haziness effect.
BYK®-A 555
BYK®-A 555 shows the highest efficiency in various adhesive applications.
BYK®-DYNWET 800
BYK®-DYNWET 800 is a silicone-free surface additive for aqueous adhesives and sealants. It reduces the dynamic surface tension during fast application processes and thus improves subtrate wetting.
BYK-P 2710
BYK-P 2710 is a processing additive for solvent-free and solvent-borne epoxy resins for the adjustment of rheological properties of 2-K systems in combination with hydrophilic fumed silica (Thixbreaker).
BYK-P 2720
BYK-P 2720 is a rheology additive for solvent-free and solvent-borne amine hardeners to enhance the rheological properties of two-component systems in combination with hydrophilic fumed silica (Thixbooster).
BYK®-W 940
BYK®-W 940 prevents sedimentation of mineral fillers such as calcium carbonate and aluminium trihydroxide and minimizes flooding and floating when organic and inorganic pigments are used.
BYK®-W 961
BYK®-W 961 is used as a wetting and dispersing additive for mineral fillers to prevent sedimentation.
BYK®-W 966
BYK®-W 966 improves the dispersion of a wide range of the most common fillers such as calcium carbonate and aluminium trihydroxide in polyester resins. It reduces the viscosity, so that a higher filler loading is possible, and helps to prevent sedimentation.
BYK®-W 969
BYK®-W 969 is used as a wetting and dispersing additive with viscosity reducing properties for adhesives and sealants.
BYK®-W 980
BYK®-W 980 improves the dispersion of a wide range of the most common fillers such as calcium carbonate and aluminium trihydroxide. It reduces the viscosity, so that a higher filler loading is possible and helps to prevent sedimentation.
BYK®-W 985
BYK®-W 985 improves the wetting and dispersion speed of the most common fillers such as calcium carbonate and aluminium trihydroxide. It dramatically reduces the viscosity so that a higher filler load is possible. BYK®-W 985 usually will not prevent sedimentation.
BYKANOL-A
BYKANOL-A is an anti-gelling additive for solvent-borne coatings to prevent increased viscosity in air-drying and baking coatings, gelling in long-term storage, and skin formation in oxidative-drying systems. Suitable for post addition.
BYKJET-9171
BYKJET-9171 is a solvent-free wetting and dispersing additive for aqueous inkjet inks.It is particularly suitable for stabilizing organic pigments and disperse dyes. It greatly reduces the viscosity of the mill base, which enables a higher pigment content in pigment concentrates. It is particularly recommended for binder-free grinding.
CLAYTONE 34
CLAYTONE 34 is a modified montmorillonite designed for use in aliphatic systems containing aromatic solvent or aromatic-aliphatic solvent blends which display moderate polarity. It demonstrates high gelling efficiency, reproducible viscosity and thixotropic development, a high degree of sag control and prevents hard settling of pigments and fillers. CLAYTONE 34 has proven to be a reliable and reproducible rheological additive for use in oil based paints, stains, alkyd enamels and primers, and epoxy systems.
CLAYTONE® 40
CLAYTONE® 40 is an organophilic bentonite derivative which is used as thixotropic thickener and anti-settling agent in solvent based coating systems of low to medium polarity. It is a traditional organoclay requiring the addition of an activator to achieve full efficiency. As organophilic smectite product, it can swell in organic media and build a gel structure (card-house structure). Weak hydrogen bonding between the single smectite platelets is the reason for this thixotropic gel structure. For optimum efficiency the complete separation of the platelets (complete dispersion of agglomerates into primary particles) is necessary.
CLAYTONE® AF
CLAYTONE® AF is a modified montmorillonite designed for use in systems containing aliphatic solvents and aliphatic-aromatic solvent blends that display low to medium polarity. CLAYTONE® AF produces reproducible viscosity and thixotropic development, a high degree of sag control and prevents pigment settling. CLAYTONE® AF is self dispersing and does not require a polar activator. CLAYTONE® AF eliminates the need for high shear or pregels.
CLAYTONE® APA
CLAYTONE® APA is a modified montmorillonite designed for use in systems containing aromatic solvent or aromatic-oxygenated solvent blends that display medium to high polarity. CLAYTONE® APA demonstrates high gelling efficiency, reproducible viscosity and thixotropic development, a high degree of sag control and prevents hard settling of pigments and fillers.
CLAYTONE® HT
CLAYTONE® HT is a modified montmorillonite designed for use in systems containing aromatic and aliphatic solvents that display low to medium polarity. CLAYTONE® HT demonstrates high gelling efficiency, reproducible viscosity and thixotropic development, a high degree of sag control and prevents hard settling of pigments and fillers. This product is a high performance rheological additive for use in high performance oil based paints and is especially suited to industrial, marine and maintenance coatings.
CLAYTONE® HY
CLAYTONE® HY is a modified montmorillonite designed for use in low to medium polarity printing inks. CLAYTONE® HY demonstrates high gelling efficiency, increases the viscosity and yield value, prevents pigment agglomeration, and settling, reduces misting and allows the ink manufacturer to control tack viscosity.
CLAYTONE-40
CLAYTONE-40 is a rheology additive in powder form based on an organophilic phyllosilicate for non-polar to medium-polar systems to create a thixotropic flow behavior.
CLAYTONE-EM
CLAYTONE-EM is a high efficiency rheological additive suitable for use in synthetic base fluids and all-oil systems to increase the carrying capacity and hole cleaning capabilities. The product is also an effective suspension agent for polymer slurries.
CLAYTONE-ER
CLAYTONE-ER is a high efficiency rheological additive suitable for use in mineral oil and synthetic base fluids to increase the carrying capacity and hole cleaning capabilities. The product is also an effective suspension agent for polymer slurries.
CLAYTONE-IMG 400
CLAYTONE-IMG 400 is a general purpose rheological additive for diesel and mineral oil based drilling fluids to increase the carrying capacity and hole cleaning capabilities.
CLAYTONE-MPZ
CLAYTONE-MPZ is a highly efficient rheology additive based on an organophilic phyllosilicate especially for medium-polarity to high-polarity systems to generate thixotropic flow behavior. Due to its special organic modification, CLAYTONE-MPZ is ideally suited to influencing the flow behavior of polar to medium-polarity coating systems. CLAYTONE-MPZ performs especially well in systems containing aromatic solvents, alcohols, glycols, ketones and esters. CLAYTONE-MPZ is the best solution particularly in epoxy systems or zinc (shop) primers, where high sag resistance or anti-settling performance is required. In comparison to other clays (e.g. Hectorite-based clays) CLAYTONE-MPZ outperforms these products in performance and ease of dispersion.
CLAYTONE-SF
CLAYTONE-SF is an ultra high efficiency rheological suitable for use in mineral oil and synthetic base fluids to increase the carrying capacity and hole cleaning capabilities. The product is also an effective suspension agent for polymer slurries.
