Home / Adhesives & Sealants / Suppliers / Ascent Chemicals
Adhesives & Sealants
Ascent Chemicals
Ascent Chemicals lists 46 grades in Adhesives & Sealants. The sheets saved on this site are below.
Grades from Ascent Chemicals
EtnaFoam 41B
EtnaFoam 41B is a filled silicone defoamer compound based on a mid-range viscosity Dimethyl silicone Fluid. The Silica is hydrophobized in a catalyzed reaction. EtnaFoam 41B is an effective defoamer when emulsified and introduced into aqueous systems. EtnaFoam 41B can be used as a base material to make more dilute products for general use. When formulating with 41B it is important to blend it properly into a pre-thickened solution with low shear with proper re-adjustment to the proper level of biocide to prevent bacteria.
EtnaFoam 41M-EM
EtnaFoam 41M-EM is 100% active silicone compound with a built-in emulsifier package. This 100% active silicone defoamer leverages silicone's superior foam control properties, providing long-lasting performance in industrial applications. The built-in emulsifier package ensures efficient dispersion and stability, allowing the silicone to spread effectively in both aqueous and non-aqueous systems for optimal defoaming action.
EtnaFoam 700 N
EtnaFoam 700 N is a 100% active, non-silicone antifoaming agent composed of EBSA in naphthenic oil. Versatile and economical, it serves as a base for custom defoamers or as a direct solution for brown stock defoaming in paper manufacturing. Ideal for systems where silicone antifoams fall short or unsuitable, its low surface activity and lack of emulsifiers minimize process interference while ensuring reliable foam control. EntaFoam 700 N is compliant with FDA regulations for indirect food contact, providing reliable performance for regulated industries.
EtnaFoam 700 S
EtnaFaom 700 S is a 100% active, non-silicone antifoaming agent composed of EBSA in paraffinic oil. Versatile and economical, it serves as a base for custom defoamers or as a direct solution for brown stock defoaming in paper manufacturing. Ideal for systems where silicone antifoams fall short or unsuitable, its low surface activity and lack of emulsifiers minimize process interference while ensuring reliable foam control. EtnaFoam 700 S is compliant with FDA regulations for indirect food contact, providing reliable performance for regulated industries.
EtnaFoam EBSA
EtnaFoam EBSA is a 100% active ethylene bis stearamide available in approximately 15 pound ingots for use as a component in formulating non-silicone defoamers in mineral oil suspension. The product is readily soluble in all forms of mineral oil, including paraffinic, naphthenic and low boiling cuts such as mineral spirits and mineral seal oil. The product forms clear solutions in these oils at temperatures above 110°C, then begins to titer or flake out at lower temperatures. Typical ranges of concentration for EBSA 100 in oil are 1 to 10%, with the lower levels being used in textile applications and the higher levels being used in paper applications.
EtnaFoam FA 2056
EtnaFoam FA 2056 is an effective 100% active defoamer and antifoam based on fatty alcohols, fatty acids, surfactants, paraffinic oil, and hydrophobized silica. The material can be used in a variety of applications where silicone is not acceptable. Etna Foam FA 2056 can be added directly to most liquid mediums to defoam with a persistent effect that prevents foam from recurring. EtnaFoam FA 2056 does not contain any reportable hazardous ingredients.
EtnaFoam FA 4580
EtnaFoam FA 4580 is an economical antifoam that is 100% non-silicone. EtnaFoam FA 4580 can be used in a broad range of applications such as paper manufacturing, textiles, waste treatment, and chemical manufacturing. EtnaFoam FA 4580 is effective against foam caused by typical process surfactants and foams from process water. In textile application EtnaFoam FA 4580 is effective in several types of equipment and is resistant to shear. EtnaFoam FA 4580 can be easily rinsed from textile fabrics.
EtnaFoam FA 6271
EtnaFoam FA 6271 is blend of mineral oil, fatty ester, and specialized defoaming agents designed to control and eliminate foam in a wide range of aqueous and non-aqueous systems. The balanced formulation provides rapid foam knockdown and sustained suppression without destabilizing the base formulation.
EtnaFoam HS N
EtnaFoam HS N is a 100% active non-silicone defoamer base made of naphthenic oil with a high concentration of hydrophobized silica. It can be used as supplied in many cases, but it is formulated without emulsifiers or surfactants to help spreading and has a low surface activity. EtnaFoam HS N is used by formulators as a defoamer base and typically will have other components added such as spreading agents and emulsifiers to increase the performance.
EtnaFoam HS P
EtnaFoam HS P is a 100% active non-silicone defoamer base made of Paraffinic oil with a high concentration of hydrophobized silica. It can be used as supplied in many cases, or it can be modified by adding spreading agents and emulsifiers to tailor to special applications.
EtnaFoam KI
EtnaFoam KI is a 100% active silicone filled with hydrophobized silica. It is used primarily as a base material for formulators but can be used as supplied in certain applications. The hydrophobized silica is often used in combination with silicone to enhance performance in emulsions. Similarly, where straight silicones are used for defoaming the addition of silica typically offers an improved performance that will vary accordingly. In formulation, EtnaFoam KI is sometimes used to manufacture emulsions.
EtnaFoam OB +
EtnaFoam OB + is a high efficiency defoamer formulated with three-dimensional siloxane. EtnaFoam OB + is ideal for metalworking lubricants and fluids. Because EtnaFoam OB+ is formulated into a polyalkylene carrier it offers added versatility applicable to semi-synthetic metalworking fluids, antifreeze coolants, glycol hydraulics, and commercial cleaners.
EtnaFoam OB-ECO+
EtnaFoam OB-ECO+ is a non-silicone defoamer that uses vegetable oil to replace traditional hydrocarbons. The resulting defoamer has several environmental benefits versus mineral oil-based products which include higher degradability, lower VOC, reduced health and safety concerns, and a much higher renewable content. In addition, the flash point of Defoamer OB-ECO+ is higher than most hydrocarbon-based products. The vegetable oil base is made from feedstocks derived from annually renewable materials and these have historically been very stable in pricing compared to oil derivatives. EtnaFoam OB-ECO+ works well in most applications where traditional non-silicone defoamers are used without modification to usage levels or procedures.
EtnaFoam OB-ECO
EtnaFoam OB-ECO is a new type of antifoam that is formulated by replacing synthetic chemicals and oils with 100% natural and renewable ingredients. The product is non-silicone containing and is effective in a broad range of foam control applications. EtnaFoam OB-ECO is especially effective in application where there is high shear or extremes in pH. EtnaFoam OB-ECO has similar performance properties to mineral seal oil naphthenic oil products with hydrophobized silica. The oil portion of the formulation uses blended vegetable oil and contains silica (sand) which is also a natural ingredient. EntaFoam OB-ECO has demonstrated excellent performance in textile applications when compared to other non-silicone materials in withstanding high shear. In other applications where non-silicone antifoams are used EntaFoam OB-ECO has been found to be highly compatible and effective. Compared to silicone it generally requires more EtnaFoam OB-ECO.
EtnaFoam OB-N 100
EtnaFoam OB-N 100 is a 100% active, non-silicone antifoaming agent that is applicable to textile and associated processing. EtnaFoam OB-N 100 was designed as an economical replacement where the use of silicone antifoaming agents is objectionable. The product contains twice the active EBSA and can typically be used at half the level to reduce oil content in the bath. The selection and proper balance of emulsifiers provides stability of this product over the entire temperature range normally employed in the dyeing of both natural and synthetic fibers. The addition of 1/8 - 1/4% based upon the weight of goods, is generally sufficient to eliminate troublesome foam. As in all antifoaming agents, care should be taken to avoid excessive levels to eliminate possible dyeing problems.
EtnaFoam OB-N 200
EtnaFoam OB-N 200 is a 100% active, non-silicone anti-foaming agent that is applicable to textile and associated processing. EtnaFoam OB-N 200 was designed as an economical replacement where the use of silicone anti-foaming agents is objectionable. The product contains twice the active amount of EBSA and can typically be used at half the level to reduce oil content in the bath.The selection and proper balance of emulsifiers provides stability of this product over the entire temperature range normally employed in the dyeing of both natural and synthetic fibers. The addition of 1/8 - 1/4% based upon the weight of goods, is generally sufficient to eliminate troublesome foam. As in all anti-foaming agents, care should be taken to avoid excessive levels to eliminate possible dyeing problems.
EtnaFoam OB-N 300
EtnaFoam OB-N 300 is a 100% active, non-silicone anti-foaming agent that is applicable to textile and associated processing. EtnaFoam OB-N 300 was designed as an economical replacement where the use of silicone anti-foaming agents is objectionable. The product contains twice the active amount of EBSA and can typically be used at half the level to reduce oil content in the bath.The selection and proper balance of emulsifiers provides stability of this product over the entire temperature range normally employed in the dyeing of both natural and synthetic fibers. The addition of 1/8 - 1/4% based upon the weight of goods, is generally sufficient to eliminate troublesome foam. As in all anti-foaming agents, care should be taken to avoid excessive levels to eliminate possible dyeing problems.
EtnaFoam OB-N WE
EtnaFoam OB-N WE is a non-silicone oil based defoamer extended to an economical user strength. Its performance is bolstered by the addition of both hydrophobized silica and EBSA. The product is used in a broad range of applications and is especially indicated where dosing and addition rates are not highly controlled. EtnaFoam OB-N WE is broadly compatible and because it does not contain silicone it has no issue with buildup or breakout even in high shear applications.
EtnaFoam OB-P 100
EtnaFoam OB-P 100 is a powerful foam control agent that contains hydrophobized silica, EBSA wax, and emulsifying & spreading agents to aid quick introduction of the material throughout the liquid being treated. EtnaFoam OB-P 100 is suitable for a wide range of applications where oil-based antifoams are an acceptable solution to foaming problems. EtnaFoam OB-P 100 can also be used as a formulary intermediate to make water extended oil-based antifoams where concentration, cost, and application techniques call for a more dilute antifoam.
EtnaFoam OB-P FG
EtnaFoam OB-P FG is a non-silicone-containing antifoaming agent that can be used in a variety of foam control applications. EtnaFoam OB-P FG contains a combination of EBSA and hydrophobic silica in a paraffinic oil & surfactant blend. EtnaFoam OB-P FG is engineered to quickly disperse and spread into liquid to increase the effectiveness of the initial foam kill. This is especially helpful in water treatment and other applications with heavy solids or in materials that are slightly viscous.
EtnaFoam PPG 2025
EtnaFoam PPG 2025 is a high-performance defoamer base formulated with hydrophobized silica in a PPG carrier. Designed for versatility, it is suitable for a broad range of industrial applications requiring effective foam suppression. While it can be utilized directly in certain applications, its primary design is to serve as a foundational component in foam control formulations. Incorporating additional agents, such as emulsifiers and surfactants, can enhance its performance across various systems.
EtnaFoam PPG 2025 DT
EtnaFoam PPG 2025 DT is a ditallate ester of polypropylene glycol 2025, offering superior versatility as a non-silicone defoamer base with excellent nonionic water and oil-emulsifying properties in hard and soft water. Its low foaming tendency, coupled with its functionality as a coupling and wetting agent, makes it ideal for metalworking fluids, water-based hydraulic fluids, and industrial cleaners. Additionally, EtnaFoam PPG 2025 DT serves as a highly effective surfactant and dispersant for applications in degreasers. Designed for demanding environments, it ensures stable performance under high shear and extreme conditions, empowering formulators to develop efficient and adaptable solutions for diverse industrial needs.
EtnaFoam PPG 2043
EtnaFoam PPG 2043 is a non-silicone containing antifoaming agent used in specialty applications where typical oil defoamers are not suitable. EtnaFoam PPG 2043 is a unique formulation of silica filled PPG with special emulsifiers and spreading agents. This unique design is especially useful in critical applications such as hydraulic fluid defoaming, inks and colorant defoaming for jet application, and others. In paints and coatings, EtnaFoam PPG 2043 is an excellent choice and especially in materials that will be applied by spray. EtnaFoam PPG 2043 can be added directly to liquid to be treated and blends with only mild stirring. It is free rinsing and will not build up in most applications.
EtnaFoam PPG 820
EtnaFoam PPG 820 is a unique non-silicone antifoam that was formulated as a brown stock defoamer for paper manufacturing. Because of its unique features it has also become a specialty defoamer for a wide range of applications. EtnaFoam PPG 820 has a high renewable content to help companies meet sustainability and renewable content coals. EtnaFoam PPG 820 has an efficient foam knock down upon addition, then has a persistent foam controlling effect in most applications.
EtnaFoam PPG WE
EtnaFoam PPG WE is a versatile, water-extended defoamer formulated with silica in EtnaFoam PPG WE designed for efficient foam control across general-purpose applications. Its advanced composition ensures compatibility with a wide range of systems, offering reliable performance in both aqueous and mixed-phase environments. Approved for general-purpose use, EtnaFoam PPG WE delivers excellent stability and foam suppression, making it an adaptable and cost-effective solution for industrial processes requiring consistent defoaming efficiency.
EtnaFoam SE 10
EtnaFoam SE 10 is an economical industrial silicone emulsion antifoam. 10 refers to the active silicone content in the product with the total active ingredients being somewhat higher. EtnaFoam SE 10 is one of a series of silicone emulsions that are available in different strengths for user preferences and applications (EtnaFoam SE 3, 5, 10, 20 & 30 are standard products). EtnaFoam SE 10 contains a unique blend of silicone emulsion and hydrophobized silica to give a rapid knock down of foam coupled with long-lasting foam control.
EtnaFoam SE 20
EtnaFoam SE 20 is an economical, highly efficient 20% active silicone emulsion effective in low to high pH systems. EtnaFoam SE 20 provides fast knockdown and works in hot or cold aqueous systems.
EtnaFoam SE 3
EtnaFoam SE 3 is a cost-effective silicone emulsion antifoam with 3% active silicone, providing reliable foam suppression at a lower concentration for reduced dosing. Part of a series available in various strengths (3, 5, 10, 20, and 30), it combines silicone and hydrophobized silica for rapid foam knockdown and moderate long-term control. An economical solution, EtnaFoam SE 3 is ideal for processes requiring effective foam management with minimal silicone content.
EtnaFoam SE 30
EtnaFoam SE 30 is a concentrated silicone emulsion used in systems where the metering and dispensing of concentrated material is tolerated. EtnaFoam SE 30 is made from Ascent’s silicone emulsion base that contains hydrophobized silica and nonionic emulsifiers. It is effective in a broad range of applications and uses. Because it is nonionic it is compatible with most chemical systems. EtnaFoam SE 30 is also used as a base material to formulate weaker user-friendly products.
EtnaFoam SE 5
EtnaFoam SE 5 is a cost-effective silicone emulsion antifoam with 5% active silicone, providing reliable foam suppression at a lower concentration for reduced dosing. Part of a series available in various strengths (3, 5, 10, 20, and 30), it combines silicone and hydrophobized silica for rapid foam knockdown and moderate long-term control. An economical solution, EtnaFoam SE 5 is ideal for processes requiring effective foam management with limited silicone content.
EtnaFoam SE 50
EtnaFoam SE 50 is a concentrated silicone emulsion used in systems where the metering and dispensing of concentrated material is tolerated. EtnaFoam SE 50 is made from Ascent’s silicone emulsion base that contains hydrophobized silica and nonionic emulsifiers. It is effective in a broad range of applications and uses. Because it is nonionic it is compatible with most chemical systems. EtnaFoam SE 50 is also used as a base material to formulate weaker user-friendly products.
EtnaFoam SE-FG 10
EtnaFoam SE-FG 10 is a silicone emulsion that is made with food grade ingredients. It is used for certain applications where nonfood grade materials are of concern. EtnaFoam SE-FG 10 is not suitable for addition to food or in direct contact with food. EntaFoam SE-FG 10 has a powerful defoaming effect for foams from soaps and surfactants. It is moderately effective for long term foam control. EntaFoam SE-FG 10 is easy to rinse completely, has some tolerance for shear and can be pumped through most dispensing systems.
EtnaFoam SE-FG 20
EtnaFoam SE-FG 20 is a concentrated silicone emulsion with food-grade ingredients, approved for indirect food contact applications. It provides powerful defoaming for foams from soaps and surfactants and offers enhanced performance at lower doses compared to EtnaFoam SE-FG 20. Effective for long-term foam control, it is easy to rinse, shear-tolerant, and compatible with most dispensing systems, making it ideal for demanding uses.
EtnaFoam SE-FG 5
EtnaFoam SE-FG 5 is a silicone emulsion that is made with food grade ingredients. It is used for certain applications where nonfood grade materials are of concern. EtnaFoam SE-FG 5 is not suitable for addition to food or in direct contact with food. EntaFoam SE-FG 5 has a powerful defoaming effect for foams from soaps and surfactants. It is moderately effective for long term foam control. EntaFoam SE-FG 5 is easy to rinse completely, has some tolerance for shear and can be pumped through most dispensing systems.
EtnaFoam SE-FR 20
EtnaFoam SE-FR 20 is a free-rinsing, nonionic silicone emulsion designed for textile applications. It excels in beck dyeing, yarn dyeing, space dyeing, and warp printing, delivering efficient foam control while resisting scum formation. A typical starting dosage is ¾ of an ounce per 100 gallons in beck applications, though mills should determine optimal levels for their systems. Highly versatile, EtnaFoam SE-FR 20 is easily dilutable with water, even under shear conditions, ensuring smooth application and consistent performance.
EtnaFoam SE-FR 3
EtnaFoam SE-FR 3 is a free rinsing silicone emulsion that can be used in textiles, metal working, agriculture, and other applications. Free rinsing is an important attribute in textiles where silicone can cause spotting and in metal applications where silicone residue can contribute to finishing problems in certain applications. EtnaFoam SE-FR 3 is economical, stable, and provides consistent results.
EtnaFoam SE-FR 3.5
EtnaFoam SE-FR 3.5 is a highly efficient free-rinsing silicone defoamer designed to be used in Jet-dyeing machines. Its use minimizes spots usually encountered with conventional silicone defoamers.
EtnaFoam SE-FR 8
EtnaFoam SE-FR 8 is a free-rinsing, nonionic silicone emulsion specially formulated for textile applications where increased sensitivity is a concern. It is ideal for processes such as beck dyeing, yarn dyeing, space dyeing, and warp printing. Providing efficient defoaming and resisting scum formation, EtnaFoam SE-FR 8 ensures consistent performance in demanding environments. A typical starting dosage is 2 ounces per 100 gallons in beck applications, though mills should determine the optimal level for their specific systems. Highly versatile, it is easily dilutable with water, even under shear conditions, for seamless application across various processes.
Rocksize 240
Rocksize 240 manufactured from fatty acid chlorides (C12-C20) and N,N-Dimethylisopropylamine (DMIPA). AKD is a highly effective sizing chemical. It is specifically designed to enhance drainage and optimize sizing efficiency in most papermaking systems. The most practical and preferred delivery system for paper is a water-based emulsion. Ascent has developed manufacturing techniques and chemical systems to produce AKD emulsions with suitable stability for the paper industry. Rocksize 240 is an economical AKD emulsion that delivers predictable results in paper manufacturing.
SierraEster GM
SierraEster GM is an ester formed by the reaction of glycerol and oleic acid. This amphiphilic molecule exhibits surfactant properties, making it effective as an emulsifier in food products, cosmetics, and pharmaceuticals. In the food industry, GMO serves as a thickening, emulsifying, anti-caking, and preservative agent, enhancing texture and shelf life. In cosmetics, it functions as an emollient and stabilizer, improving the consistency and moisturizing properties of creams and lotions.
SierraPlas DM
SierraPlas DM is a co-monomer. It can be used in the production of derivatives of succinic acid as well as other organic synthesis and emulsion polymerizations.
SierraPlas OO
SierraPlas OO or 2-Ethylhexyl Oleate is a fatty acid ester that can be used as an anti-wear additive in metal working fluids and lubricants as well as a processing aid and plasticizer for tire compounding.
SierraSulf 2-EH NA 40
SierrSulf 2 EH-NA 40 is an anionic surfactant that is an effective low foaming penetrant that aids in wetting of fabrics, or particles in an emulsion or dispersion. It is highly caustic stable and compatible in most nonionic and anionic systems. Generally, it is incompatible in most strongly cationic systems. SierraSulf 2 EH-NA 40 is easily rinsed without leaving residue.
SierraSulf 2-EH NA 60
SierrSulf 2 EH-NA 60 is an anionic surfactant that is an effective low foaming penetrant that aids in wetting of fabrics, or particles in an emulsion or dispersion. It is highly caustic stable and compatible in most nonionic and anionic systems. Generally, it is incompatible in most strongly cationic systems. SierraSulf 2 EH-NA 60 is easily rinsed without leaving residue.
SierraSurf DLSS 30+
SierraSurf™ DLSS 30+ is a very mild, low-color anionic surfactant derived from an ethoxylated lauryl alcohol sulfosuccinate with a narrower (UVCB) ethoxylation distribution, offering effective wetting, emulsification, and stabilization across a range of aqueous systems. It is well suited for use in latex emulsion polymerization for paints, coatings, adhesives, and related formulations, while also delivering excellent foaming performance in personal care and HI&I applications. When blended with Sodium Laureth Sulfate (SLES), SierraSurf DLSS 30+ enhances foam volume, foam stability, and viscosity response, supporting formulations that balance strong performance with mildness to skin and eye.
SierraSurf DLSS 30
SierraSurf™ DLSS 30 is a very mild, low-color anionic surfactant derived from an ethoxylated lauryl alcohol sulfosuccinate with a broader (UVCB) ethoxylation distribution, offering effective wetting, emulsification, and stabilization across a range of aqueous systems. It is well suited for use in latex emulsion polymerization for paints, coatings, adhesives, and related formulations, while also delivering excellent foaming performance in personal care and HI&I applications. When blended with Sodium Laureth Sulfate (SLES), SierraSurf DLSS 30 enhances foam volume, foam stability, and viscosity response, supporting formulations that balance strong performance with mildness to skin and eye.
