Baybond® PU 405

Covestro (formerly Bayer MaterialScience) 科思创

Baybond® PU 405 is an anionic/non-ionic crosslinking polyether urethane polymer used as the film-forming component in glass fibre sizes. This product becomes milky white when dispersed in water. This product has a non-volatile content (0.9-1.1g / 1h / 125°C, convection oven) of 32-35, a flow time at 23°C, (4mmcup) of 11-18, and a pH value 20°C (supply form) of 6.0-8.0. Baybond® PU 405 was developed for the sizing of glass fibres used to reinforce thermoplastics, particularly polyamide. Glass fibre sizes based on Baybond® PU 405 are characterised by their outstanding film-forming properties and very good adhesion. They have very good colourfastness, even at high temperatures. The mechanical film properties of the product are developed fully by post-crosslinking at temperatures from 170°C for a duration of 20 minutes. Baybond® PU 405 is also highly resistant to shear forces and hydrolysis.

Supplier profile

Documents

No document is attached to this grade yet.

Where it is used

Availability

Covestro (formerly Bayer MaterialScience) 科思创 publishes documents in the marked regions.

Supplier details

Covestro (formerly Bayer MaterialScience) 科思创 lists this grade in the Chemicals DB directory.

More grades from Covestro (formerly Bayer MaterialScience) 科思创

Also from Covestro (formerly Bayer MaterialScience) 科思创

Acclaim® Polyol 12200 N

Acclaim® Polyol 12200 N is a polyether polyol that is suitable for combination with Desmodur® in the formulation of solvent-free or low-solvent polyurethanes. This product is a solvent-free, pale, viscous liquid. Acclaim® Polyol 12200 N is suitable for combination with many Desmodur® products in the formulation of solvent-free elastic coatings, adhesives and sealants. This product can be thinned with solvents such as esters, ketones and aromatics. Only PU grade solvents should be used (< 0.05% by wt. water).

Acclaim® Polyol 18200 N

Acclaim® Polyol 18200 N is a polyether polyol that is suitable for combination with Desmodur® in the formulation of solvent-free or low-solvent polyurethanes. This product is a colorless to yellowish viscous liquid, with a hydroxyl number of 6.0 + 1.0 and a viscosity at 25? of 23,000 + 4,000. Acclaim® Polyol 18200 N is suitable for the formulation of elastic sealants and adhesives. It can be thinned with solvents such as esters, ketones and aromatics. Only PU grade solvents should be used (0.05% by wt. water).

Acclaim® Polyol 4200

Acclaim® Polyol 4200 is a polyether polyol that is suitable for combination with Desmodur® in the formulation of solvent-free or low-solvent polyurethanes. This product is a solvent-free, pale, low-viscousity liquid, with a hydroxyl number of 28.0 ± 1.5 and an acid humber of 0.004 - 0.020. Acclaim® Polyol 4200 is suitable for combination with many Desmodur® products in the formulation of solvent-free elastic coatings, adhesives and sealants. It can be thinned with solvents such as esters, ketones and aromatics. Only PU grade solvents should be used (< 0.05% by wt. water).

Acclaim® Polyol 6300

Acclaim® Polyol 6300 is a polyether polyol that is suitable for combination with Desmodur in the formulation of solvent-free or low-solvent polyurethanes.