Desmodur® DN

Covestro (formerly Bayer MaterialScience) 科思创

Desmodur® DN is an aliphatic polyisocyanate of low volatility. Desmodur® DN is a solvent-free liquid polyisocyanate that is emulsifiable in water. Any occasional turbidity or precipitation visible is caused by very small amounts of processing aids These have no adverse effect on the processing and final properties of the cured adhesives. It can be used as the crosslinker for largely pH-neutral aqueous polymer dispersions including polyurethane, polyvinyl acetate, polyacrylate and synthetic rubber dispersions. Crosslinking increases the resistance of the bonds to heat, water, plasticisers and many solvents. Compared with Desmodur® DA, Desmodur® DN is characterised by its much lower viscosity and is not prone to turbidity at low storage temperatures. This product has an NCO content of 21.8 ± 0.5%, a viscosity at 23°C (rotation) of 1,250 ± 300 mPa·s, and an HDI monomer content of = 0.25%.

Supplier profile

Documents

No document is attached to this grade yet.

Where it is used

Availability

Covestro (formerly Bayer MaterialScience) 科思创 publishes documents in the marked regions.

Supplier details

Covestro (formerly Bayer MaterialScience) 科思创 lists this grade in the Chemicals DB directory.

More grades from Covestro (formerly Bayer MaterialScience) 科思创

Also from Covestro (formerly Bayer MaterialScience) 科思创

Acclaim® Polyol 12200 N

Acclaim® Polyol 12200 N is a polyether polyol that is suitable for combination with Desmodur® in the formulation of solvent-free or low-solvent polyurethanes. This product is a solvent-free, pale, viscous liquid. Acclaim® Polyol 12200 N is suitable for combination with many Desmodur® products in the formulation of solvent-free elastic coatings, adhesives and sealants. This product can be thinned with solvents such as esters, ketones and aromatics. Only PU grade solvents should be used (< 0.05% by wt. water).

Acclaim® Polyol 18200 N

Acclaim® Polyol 18200 N is a polyether polyol that is suitable for combination with Desmodur® in the formulation of solvent-free or low-solvent polyurethanes. This product is a colorless to yellowish viscous liquid, with a hydroxyl number of 6.0 + 1.0 and a viscosity at 25? of 23,000 + 4,000. Acclaim® Polyol 18200 N is suitable for the formulation of elastic sealants and adhesives. It can be thinned with solvents such as esters, ketones and aromatics. Only PU grade solvents should be used (0.05% by wt. water).

Acclaim® Polyol 4200

Acclaim® Polyol 4200 is a polyether polyol that is suitable for combination with Desmodur® in the formulation of solvent-free or low-solvent polyurethanes. This product is a solvent-free, pale, low-viscousity liquid, with a hydroxyl number of 28.0 ± 1.5 and an acid humber of 0.004 - 0.020. Acclaim® Polyol 4200 is suitable for combination with many Desmodur® products in the formulation of solvent-free elastic coatings, adhesives and sealants. It can be thinned with solvents such as esters, ketones and aromatics. Only PU grade solvents should be used (< 0.05% by wt. water).

Acclaim® Polyol 6300

Acclaim® Polyol 6300 is a polyether polyol that is suitable for combination with Desmodur in the formulation of solvent-free or low-solvent polyurethanes.